Attachment 25115 Details for Bug 21389 – dmesg

dmesg

dmesg-output (text/plain), 22.20 KB, created by Jens Luedicke on 2009-04-24 10:16:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jens Luedicke

Created: 2009-04-24 10:16:31 UTC

Size: 22.20 KB

patch

obsolete

>Linux version 2.6.29.1 (root@localhost) (gcc version 4.2.4) #1 PREEMPT Thu Apr 16 21:07:24 CEST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
> BIOS-e820: 000000007f6e0000 - 000000007f6f7000 (ACPI data)
> BIOS-e820: 000000007f6f7000 - 000000007f6f9000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x7f6e0 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>ACPI: RSDP 000F6EC0, 0024 (r2 IBM   )
>ACPI: XSDT 7F6EF33D, 004C (r1 IBM    TP-1W        2020  LTP        0)
>ACPI: FACP 7F6EF400, 00F4 (r3 IBM    TP-1W        2020 IBM         1)
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
>ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 7F6EF5E7, 7865 (r1 IBM    TP-1W        2020 MSFT  100000E)
>ACPI: FACS 7F6F8000, 0040
>ACPI: SSDT 7F6EF5B4, 0033 (r1 IBM    TP-1W        2020 MSFT  100000E)
>ACPI: ECDT 7F6F6E4C, 0052 (r1 IBM    TP-1W        2020 IBM         1)
>ACPI: TCPA 7F6F6E9E, 0032 (r1 IBM    TP-1W        2020 PTL         1)
>ACPI: BOOT 7F6F6FD8, 0028 (r1 IBM    TP-1W        2020  LTP        1)
>1150MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 00000000 - 377fe000
>  bootmap 00008000 - 0000ef00
>(6 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000100000 - 000056d270]    TEXT DATA BSS ==> [0000100000 - 000056d270]
>  #2 [000056e000 - 0000571000]    INIT_PG_TABLE ==> [000056e000 - 0000571000]
>  #3 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #4 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #5 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0007f6e0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f6e0
>On node 0 totalpages: 521855
>free_area_init_node: node 0, pgdat c04c8600, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 2302 pages used for memmap
>  HighMem zone: 292324 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f800000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517777
>Kernel command line: root=/dev/hda1 ro nopat
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 1694.736 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2064944k/2087808k available (2816k kernel code, 21708k reserved, 1094k data, 268k init, 1178504k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffed000 - 0xfffff000   (  72 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc04d4000 - 0xc0517000   ( 268 kB)
>      .data : 0xc03c0280 - 0xc04d1dc0   (1094 kB)
>      .text : 0xc0100000 - 0xc03c0280   (2816 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3389.47 BogoMIPS (lpj=1694736)
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>[ds] using Pentium M configuration
>[ds] pebs not available
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
>Checking 'hlt' instruction... OK.
>Freeing SMP alternatives: 0k freed
>ACPI: Core revision 20081204
>ACPI: setting ELCR to 0200 (from 0800)
>net_namespace: 544 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd8c6, last bus=5
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
>pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff]
>pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.1: reg 10 32bit mmio: [0xe8000000-0xefffffff]
>pci 0000:00:02.1: reg 14 32bit mmio: [0xd0080000-0xd00fffff]
>pci 0000:00:02.1: supports D1
>pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0100000-0xd01003ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
>pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
>pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
>pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
>pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0100c00-0xd0100dff]
>pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0100800-0xd01008ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
>pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
>pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.6: PME# disabled
>pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0200fff]
>pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:02.0: PME# disabled
>pci 0000:02:08.0: reg 10 32bit mmio: [0xd0201000-0xd0201fff]
>pci 0000:02:08.0: reg 14 io port: [0x7000-0x703f]
>pci 0000:02:08.0: supports D1 D2
>pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:08.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x3000-0x7fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
>pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x167f has been reserved
>pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:00.0:   IO window: 0x003000-0x0030ff
>pci 0000:02:00.0:   IO window: 0x003400-0x0034ff
>pci 0000:02:00.0:   PREFETCH window: 0xf0000000-0xf3ffffff
>pci 0000:02:00.0:   MEM window: 0xd4000000-0xd7ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0x3000-0x7fff
>pci 0000:00:1e.0:   MEM window: 0xd0200000-0xdfffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000f0000000-0x000000f7ffffff
>pci 0000:00:1e.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 io:  [0x3000-0x7fff]
>pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
>pci_bus 0000:02: resource 2 mem: [0xf0000000-0xf7ffffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:03: resource 0 io:  [0x3000-0x30ff]
>pci_bus 0000:03: resource 1 io:  [0x3400-0x34ff]
>pci_bus 0000:03: resource 2 mem: [0xf0000000-0xf3ffffff]
>pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Simple Boot Flag at 0x35 set to 0x1
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1240592524.099:1): initialized
>highmem bounce pool size: 64 pages
>msgmni has been set to 1732
>alg: No test for cipher_null (cipher_null-generic)
>alg: No test for digest_null (digest_null-generic)
>alg: No test for compress_null (compress_null-generic)
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (44 C)
>Non-volatile memory driver v1.3
>intel_rng: FWH not detected
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x01)
>PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1810-0x1817
>    ide1: BM-DMA at 0x1818-0x181f
>Probing IDE interface ide0...
>hda: SAMSUNG HM160HC, ATA DISK drive
>Switched to high resolution mode on CPU 0
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-gd driver 1.18
>hda: max request size: 512KiB
>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
>ide-cd driver 5.00
>ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>Driver 'sd' needs updating - please use bus_type methods
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>hdaps: IBM ThinkPad R50 detected.
>input: hdaps as /devices/platform/hdaps/input/input4
>hdaps: driver successfully loaded.
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>thinkpad_acpi: ThinkPad ACPI Extras v0.22
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 1WET82WW (2.02 ), EC 1VHT28WW-1.04
>thinkpad_acpi: IBM ThinkPad R50e, model 1834S7G
>Marking TSC unstable due to TSC halts in idle
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi:orange:batt
>Registered led device: tpacpi:green:batt
>Registered led device: tpacpi::dock_active
>Registered led device: tpacpi::bay_active
>Registered led device: tpacpi::dock_batt
>Registered led device: tpacpi::unknown_led
>Registered led device: tpacpi::standby
>input: ThinkPad Extra Buttons as /devices/virtual/input/input6
>oprofile: using timer interrupt.
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Using IPI Shortcut mode
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8
>generic-usb 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 3:1.
>Freeing unused kernel memory: 268k freed
>Write protecting the kernel text: 2820k
>Write protecting the kernel read-only data: 888k
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 855GM Chipset
>agpgart-intel 0000:00:00.0: detected 8060K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
>e100 0000:02:08.0: PME# disabled
>e100: eth0: e100_probe: addr 0xd0201000, irq 11, MAC addr 00:0a:e4:36:a6:74
>[drm] Initialized drm 1.1.0 20060810
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2km
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ipw2200 0000:02:02.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>eth1 (ipw2200): not using net_device_ops yet
>ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
>pci 0000:00:02.0: power state changed by ACPI to D0
>pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:02.0: setting latency timer to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
>Intel ICH 0000:00:1f.5: setting latency timer to 64
>i2c-adapter i2c-1: unable to read EDID block.
>pci 0000:00:02.0: LVDS-1: no EDID data
>ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:00:02.0: VGA-1: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>AC'97 0 analog subsections not ready
>pci 0000:00:02.0: LVDS-1: no EDID data
>allocated 1024x768 fb: 0x007ff000, bo f6b14440
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
>intelfb: Version 0.9.6
>intel8x0_measure_ac97_clock: measured 50474 usecs
>intel8x0: clocking to 48000
>intelfb: 00:02.0: Intel(R) 855GM, aperture size 128MB, stolen memory 8060kB
>intelfb: Non-CRT device is enabled ( LVDS port ).  Disabling mode switching.
>intelfb: Video mode must be programmed at boot time.
>EXT3 FS on hda1, internal journal
>Adding 4456440k swap on /swapfile.  Priority:-1 extents:1124 across:4553076k 
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>e100: eth0 NIC Link is Up 100 Mbps Full Duplex
>thinkpad_acpi: setting the hotkey mask to 0x0000ffff is likely not the best way to go about it
>thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
>e100: eth0 NIC Link is Up 100 Mbps Full Duplex
>[drm] LVDS-8: set mode 1024x768 a

Actions: View

Attachments on bug 21389: 25114 | 25115

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.