Linux version 2.6.29.1 (root@localhost) (gcc version 4.2.4) #1 PREEMPT Thu Apr 16 21:07:24 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) BIOS-e820: 000000007f6e0000 - 000000007f6f7000 (ACPI data) BIOS-e820: 000000007f6f7000 - 000000007f6f9000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7f6e0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000F6EC0, 0024 (r2 IBM ) ACPI: XSDT 7F6EF33D, 004C (r1 IBM TP-1W 2020 LTP 0) ACPI: FACP 7F6EF400, 00F4 (r3 IBM TP-1W 2020 IBM 1) ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204] ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7F6EF5E7, 7865 (r1 IBM TP-1W 2020 MSFT 100000E) ACPI: FACS 7F6F8000, 0040 ACPI: SSDT 7F6EF5B4, 0033 (r1 IBM TP-1W 2020 MSFT 100000E) ACPI: ECDT 7F6F6E4C, 0052 (r1 IBM TP-1W 2020 IBM 1) ACPI: TCPA 7F6F6E9E, 0032 (r1 IBM TP-1W 2020 PTL 1) ACPI: BOOT 7F6F6FD8, 0028 (r1 IBM TP-1W 2020 LTP 1) 1150MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00008000 - 0000ef00 (6 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 000056d270] TEXT DATA BSS ==> [0000100000 - 000056d270] #2 [000056e000 - 0000571000] INIT_PG_TABLE ==> [000056e000 - 0000571000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #5 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f6e0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f6e0 On node 0 totalpages: 521855 free_area_init_node: node 0, pgdat c04c8600, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2302 pages used for memmap HighMem zone: 292324 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7f800000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517777 Kernel command line: root=/dev/hda1 ro nopat Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1694.736 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2064944k/2087808k available (2816k kernel code, 21708k reserved, 1094k data, 268k init, 1178504k highmem) virtual kernel memory layout: fixmap : 0xfffed000 - 0xfffff000 ( 72 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc04d4000 - 0xc0517000 ( 268 kB) .data : 0xc03c0280 - 0xc04d1dc0 (1094 kB) .text : 0xc0100000 - 0xc03c0280 (2816 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 3389.47 BogoMIPS (lpj=1694736) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K [ds] using Pentium M configuration [ds] pebs not available Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20081204 ACPI: setting ELCR to 0200 (from 0800) net_namespace: 544 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8c6, last bus=5 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807] pci 0000:00:02.0: supports D1 pci 0000:00:02.1: reg 10 32bit mmio: [0xe8000000-0xefffffff] pci 0000:00:02.1: reg 14 32bit mmio: [0xd0080000-0xd00fffff] pci 0000:00:02.1: supports D1 pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0100000-0xd01003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0100c00-0xd0100dff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0100800-0xd01008ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0200fff] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold pci 0000:02:02.0: PME# disabled pci 0000:02:08.0: reg 10 32bit mmio: [0xd0201000-0xd0201fff] pci 0000:02:08.0: reg 14 io port: [0x7000-0x703f] pci 0000:02:08.0: supports D1 D2 pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:08.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x3000-0x7fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x167f has been reserved pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: 0x003000-0x0030ff pci 0000:02:00.0: IO window: 0x003400-0x0034ff pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x3000-0x7fff pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:1e.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:02: resource 0 io: [0x3000-0x7fff] pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff] pci_bus 0000:02: resource 2 mem: [0xf0000000-0xf7ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0x3000-0x30ff] pci_bus 0000:03: resource 1 io: [0x3400-0x34ff] pci_bus 0000:03: resource 2 mem: [0xf0000000-0xf3ffffff] pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1240592524.099:1): initialized highmem bounce pool size: 64 pages msgmni has been set to 1732 alg: No test for cipher_null (cipher_null-generic) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (44 C) Non-volatile memory driver v1.3 intel_rng: FWH not detected brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x01) PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817 ide1: BM-DMA at 0x1818-0x181f Probing IDE interface ide0... hda: SAMSUNG HM160HC, ATA DISK drive Switched to high resolution mode on CPU 0 hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hda: max request size: 512KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > ide-cd driver 5.00 ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input3 hdaps: IBM ThinkPad R50 detected. input: hdaps as /devices/platform/hdaps/input/input4 hdaps: driver successfully loaded. device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver thinkpad_acpi: ThinkPad ACPI Extras v0.22 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 1WET82WW (2.02 ), EC 1VHT28WW-1.04 thinkpad_acpi: IBM ThinkPad R50e, model 1834S7G Marking TSC unstable due to TSC halts in idle input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby input: ThinkPad Extra Buttons as /devices/virtual/input/input6 oprofile: using timer interrupt. TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8 generic-usb 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 3:1. Freeing unused kernel memory: 268k freed Write protecting the kernel text: 2820k Write protecting the kernel read-only data: 888k Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855GM Chipset agpgart-intel 0000:00:00.0: detected 8060K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 e100 0000:02:08.0: PME# disabled e100: eth0: e100_probe: addr 0xd0201000, irq 11, MAC addr 00:0a:e4:36:a6:74 [drm] Initialized drm 1.1.0 20060810 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2km ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ipw2200 0000:02:02.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection eth1 (ipw2200): not using net_device_ops yet ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:02.0: setting latency timer to 64 MC'97 1 converters and GPIO not ready (0xff00) Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH 0000:00:1f.5: setting latency timer to 64 i2c-adapter i2c-1: unable to read EDID block. pci 0000:00:02.0: LVDS-1: no EDID data ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) i2c-adapter i2c-0: unable to read EDID block. pci 0000:00:02.0: VGA-1: no EDID data i2c-adapter i2c-1: unable to read EDID block. AC'97 0 analog subsections not ready pci 0000:00:02.0: LVDS-1: no EDID data allocated 1024x768 fb: 0x007ff000, bo f6b14440 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 on minor 0 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets intelfb: Version 0.9.6 intel8x0_measure_ac97_clock: measured 50474 usecs intel8x0: clocking to 48000 intelfb: 00:02.0: Intel(R) 855GM, aperture size 128MB, stolen memory 8060kB intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Video mode must be programmed at boot time. EXT3 FS on hda1, internal journal Adding 4456440k swap on /swapfile. Priority:-1 extents:1124 across:4553076k kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. e100: eth0 NIC Link is Up 100 Mbps Full Duplex thinkpad_acpi: setting the hotkey mask to 0x0000ffff is likely not the best way to go about it thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation e100: eth0 NIC Link is Up 100 Mbps Full Duplex [drm] LVDS-8: set mode 1024x768 a