keyboard does not work at all in X. trackpoint works fine. ctrl+alt+backspace and ctrl+alt+fN do not work - chvt or killing X from a remote machine are the only ways to get back to console; keyboard function is restored then.
here is the xorg.conf, as produced by "X -configure": Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/Speedo/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" EndSection Section "Module" Load "record" Load "extmod" Load "dbe" Load "dri" Load "glx" Load "xtrap" Load "freetype" Load "type1" Load "speedo" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/mouse" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "accel" # [<bool>] #Option "crt_display" # [<bool>] #Option "composite_sync" # [<bool>] #Option "hw_cursor" # [<bool>] #Option "linear" # [<bool>] #Option "mmio_cache" # [<bool>] #Option "test_mmio_cache" # [<bool>] #Option "panel_display" # [<bool>] #Option "probe_clocks" # [<bool>] #Option "reference_clock" # <freq> #Option "shadow_fb" # [<bool>] #Option "sw_cursor" # [<bool>] Identifier "Card0" Driver "ati" VendorName "ATI" BoardName "Rage Mobility P/M" ChipSet "ati" ChipId 0x4c52 ChipRev 0x64 BusID "PCI:0:4:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
X reports "Using vt 16" - however, vt 16 is occupied by a getty; until now i've been running only xfree86 (4.3.0), which correctly allocates a new terminal and doesn't overlap with an already occupied vt. i guess this is the problem, as it turned out that the console at vt 16 is full of noise characters, obviously the keystrokes that did not reach X. here is the full Xorg.0.log: Release Date: 18 December 2003 X Protocol Version 11, Revision 0, Release 6.7 Build Operating System: Linux 2.6.8-gentoo-r3 i686 [ELF] Current Operating System: Linux snuggles.loc 2.6.8.1 #1 Tue Sep 14 12:11:57 EEST 2004 i686 Build Date: 12 September 2004 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 14 19:30:13 2004 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xorg" (**) XKB: rules: "xorg" (**) Option "XkbModel" "thinkpad" (**) XKB: model: "thinkpad" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Speedo/,/usr/share/fonts/Type1/,/usr/share/fonts/CID/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 Using vt 16 (--) using VT number 16 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7194 card 0000,0000 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 8086,7195 card 1014,01d1 rev 00 class 04,01,00 hdr 00 (II) PCI: 00:02:0: chip 104c,ac50 card 4000,0000 rev 01 class 06,07,00 hdr 02 (II) PCI: 00:03:0: chip 8086,1229 card 8086,2205 rev 0c class 02,00,00 hdr 80 (II) PCI: 00:03:1: chip 11c1,045c card 8086,2205 rev 01 class 07,00,00 hdr 80 (II) PCI: 00:04:0: chip 1002,4c52 card 1014,01c7 rev 64 class 03,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7198 card 0000,0000 rev 01 class 06,80,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7199 card 0000,0000 rev 00 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,719a card 0000,0000 rev 00 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,719b card 0000,0000 rev 00 class 06,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 1: bridge is at (0:2:0), (0,1,4), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x10000000 - 0x103fffff (0x400000) MX[B] (--) PCI:*(0:4:0) ATI Technologies Inc Rage Mobility P/M rev 100, Mem @ 0xfd000000/24, 0xfc022000/12, I/O @ 0x2400/8 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xfc021000 - 0xfc021fff (0x1000) MX[B] [1] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [2] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] [3] -1 0 0xfc022000 - 0xfc022fff (0x1000) MX[B](B) [4] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [5] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B] [6] -1 0 0x00001890 - 0x0000189f (0x10) IX[B] [7] -1 0 0x00001880 - 0x00001887 (0x8) IX[B] [8] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [9] -1 0 0x00001800 - 0x0000183f (0x40) IX[B] [10] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [11] -1 0 0x00002400 - 0x000024ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfc021000 - 0xfc021fff (0x1000) MX[B] [1] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [2] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] [3] -1 0 0xfc022000 - 0xfc022fff (0x1000) MX[B](B) [4] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [5] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B] [6] -1 0 0x00001890 - 0x0000189f (0x10) IX[B] [7] -1 0 0x00001880 - 0x00001887 (0x8) IX[B] [8] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [9] -1 0 0x00001800 - 0x0000183f (0x40) IX[B] [10] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [11] -1 0 0x00002400 - 0x000024ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfc021000 - 0xfc021fff (0x1000) MX[B] [6] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [7] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] [8] -1 0 0xfc022000 - 0xfc022fff (0x1000) MX[B](B) [9] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B] [13] -1 0 0x00001890 - 0x0000189f (0x10) IX[B] [14] -1 0 0x00001880 - 0x00001887 (0x8) IX[B] [15] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [16] -1 0 0x00001800 - 0x0000183f (0x40) IX[B] [17] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [18] -1 0 0x00002400 - 0x000024ff (0x100) IX[B](B) (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "xtrap" (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a (II) Module xtrap: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DEC-XTRAP (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.7.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.1 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "ati" (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o (II) Module ati: vendor="X.Org Foundation" compiled for 6.7.0, module version = 6.5.6 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP), ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP), ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?), ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI), ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP), ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?), ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?), ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?), ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?), ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI), ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI), ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?), ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?), ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?), ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI), ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?), ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?), ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?), ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP), ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?), ATI Rage 128 Pro ULTRA TU (AGP?) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI), ATI Radeon Mobility M7 LW (AGP), ATI Mobility FireGL 7800 M7 LX (AGP), ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon IGP330M/340M/350M (U2) 4337, ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437, ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI), ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI), ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP), ATI Radeon Mobility 9000 (M9) Lf (AGP), ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9100 IGP (A5) 5834, ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP), ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP), ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP), ATI Radeon Mobility 9600 (M10) NQ (AGP), ATI Radeon Mobility 9600 (M11) NR (AGP), ATI Radeon Mobility 9600 (M10) NS (AGP), ATI FireGL Mobility T2 (M10) NT (AGP), ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP) (II) Primary Device is: PCI 00:04:0 (II) ATI: Candidate "Device" section "Card0". (II) ATI: Shared PCI/AGP Mach64 in slot 0:4:0 detected. (II) ATI: Shared PCI/AGP Mach64 in slot 0:4:0 assigned to active "Device" section "Card0". (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfc021000 - 0xfc021fff (0x1000) MX[B] [6] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [7] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] [8] -1 0 0xfc022000 - 0xfc022fff (0x1000) MX[B](B) [9] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B] [13] -1 0 0x00001890 - 0x0000189f (0x10) IX[B] [14] -1 0 0x00001880 - 0x00001887 (0x8) IX[B] [15] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [16] -1 0 0x00001800 - 0x0000183f (0x40) IX[B] [17] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [18] -1 0 0x00002400 - 0x000024ff (0x100) IX[B](B) (II) Loading sub module "atimisc" (II) LoadModule: "atimisc" (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o (II) Module atimisc: vendor="X.Org Foundation" compiled for 6.7.0, module version = 6.5.6 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfc021000 - 0xfc021fff (0x1000) MX[B] [6] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [7] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] [8] -1 0 0xfc022000 - 0xfc022fff (0x1000) MX[B](B) [9] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B] [16] -1 0 0x00001890 - 0x0000189f (0x10) IX[B] [17] -1 0 0x00001880 - 0x00001887 (0x8) IX[B] [18] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [19] -1 0 0x00001800 - 0x0000183f (0x40) IX[B] [20] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [21] -1 0 0x00002400 - 0x000024ff (0x100) IX[B](B) [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (==) ATI(0): Chipset: "ati". (==) ATI(0): Depth 16, (==) framebuffer bpp 16 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) ATI(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) ATI(0): VESA BIOS detected (II) ATI(0): VESA VBE Version 2.0 (II) ATI(0): VESA VBE Total Mem: 4096 kB (II) ATI(0): VESA VBE OEM: ATI MACH64 (II) ATI(0): VESA VBE OEM Software Rev: 1.0 (II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc. (II) ATI(0): VESA VBE OEM Product: MACH64RM (II) ATI(0): VESA VBE OEM Product Rev: 01.00 (II) ATI(0): VESA VBE DDC supported (II) ATI(0): VESA VBE DDC Level none (II) ATI(0): VESA VBE DDC transfer in appr. 2 sec. (II) ATI(0): VESA VBE DDC read failed (II) ATI(0): BIOS Data: BIOSSize=0x10000, ROMTable=0x00F8. (II) ATI(0): BIOS Data: ClockTable=0x0992, FrequencyTable=0x096C. (II) ATI(0): BIOS Data: LCDTable=0x0164, LCDPanelInfo=0xBB24. (II) ATI(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x0142. (II) ATI(0): BIOS Data: I2CType=0x0F, Tuner=0x00, Decoder=0x00, Audio=0x0F. (--) ATI(0): ATI 3D Rage Mobility graphics controller detected. (--) ATI(0): Chip type 4C52 "LR", version 4, foundry TSMC, class 0, revision 0x01. (--) ATI(0): PCI bus interface detected; block I/O base is 0x2400. (--) ATI(0): ATI Mach64 adapter detected. (!!) ATI(0): For information on using the multimedia capabilities of this adapter, please see http://gatos.sf.net. (--) ATI(0): Internal RAMDAC (subtype 1) detected. (==) ATI(0): RGB weight 565 (==) ATI(0): Default visual is TrueColor (==) ATI(0): Using gamma correction (1.0, 1.0, 1.0) (II) ATI(0): Using Mach64 accelerator CRTC. (--) ATI(0): 1024x768 panel (ID 2) detected. (--) ATI(0): Panel model IBM XGA. (--) ATI(0): Panel clock is 65.146 MHz. (II) ATI(0): Using digital flat panel interface. (II) ATI(0): Storing hardware cursor image at 0xFD3FFC00. (II) ATI(0): Using 8 MB linear aperture at 0xFD000000. (!!) ATI(0): Virtual resolutions will be limited to 4095 kB due to linear aperture size and/or placement of hardware cursor image area. (II) ATI(0): Using Block 0 MMIO aperture at 0xFC022400. (II) ATI(0): Using Block 1 MMIO aperture at 0xFC022000. (==) ATI(0): Write-combining range (0xfd000000,0x400000) (II) ATI(0): MMIO write caching enabled. (--) ATI(0): 4096 kB of SGRAM (2:1) 32-bit detected (using 4095 kB). (WW) ATI(0): Cannot shadow an accelerated frame buffer. (II) ATI(0): Engine XCLK 62.227 MHz; Refresh rate code 1. (--) ATI(0): Internal programmable clock generator detected. (--) ATI(0): Reference clock 29.500 MHz. (II) ATI(0): Maximum clock: 230.00 MHz (II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) ATI(0): Not using default mode "576x432" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1152x768" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1024" (exceeds panel dimensions) (II) ATI(0): Not using default mode "800x512" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions) (II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions) (--) ATI(0): Virtual size is 1024x768 (pitch 1024) (**) ATI(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) ATI(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) ATI(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) ATI(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) ATI(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) ATI(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) ATI(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) ATI(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) ATI(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I) (II) ATI(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (**) ATI(0): *Built-in mode "Native panel mode": 65.1 MHz, 62.6 kHz, 81.4 Hz (II) ATI(0): Modeline "Native panel mode" 65.15 1024 1024 1032 1040 768 768 769 770 (**) ATI(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) ATI(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) ATI(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) ATI(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) ATI(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) ATI(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) ATI(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) ATI(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) ATI(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) ATI(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) ATI(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) ATI(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) ATI(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) ATI(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) ATI(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) ATI(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) ATI(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) ATI(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) ATI(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) ATI(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) ATI(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) ATI(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) ATI(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) ATI(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) ATI(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) ATI(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (**) ATI(0): *Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D) (II) ATI(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync (**) ATI(0): *Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D) (II) ATI(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (**) ATI(0): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) (II) ATI(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (**) ATI(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II) ATI(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (**) ATI(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) ATI(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (**) ATI(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D) (II) ATI(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync (**) ATI(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) ATI(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (**) ATI(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D) (II) ATI(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (**) ATI(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) ATI(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (**) ATI(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) ATI(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (**) ATI(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) ATI(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (**) ATI(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) ATI(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (**) ATI(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D) (II) ATI(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (**) ATI(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) (II) ATI(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (**) ATI(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) (II) ATI(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync (**) ATI(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (II) ATI(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (**) ATI(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D) (II) ATI(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (**) ATI(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) ATI(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (**) ATI(0): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) ATI(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (==) ATI(0): DPI set to (75, 75) (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.7.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (II) ATI(0): I2C bus "Mach64" initialized. (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xfc022000 - 0xfc022fff (0x1000) MS[B] [1] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MS[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xfc021000 - 0xfc021fff (0x1000) MX[B] [8] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] [9] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] [10] -1 0 0xfc022000 - 0xfc022fff (0x1000) MX[B](B) [11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [15] 0 0 0x00002400 - 0x000024ff (0x100) IS[B] [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B] [19] -1 0 0x00001890 - 0x0000189f (0x10) IX[B] [20] -1 0 0x00001880 - 0x00001887 (0x8) IX[B] [21] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [22] -1 0 0x00001800 - 0x0000183f (0x40) IX[B] [23] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [24] -1 0 0x00002400 - 0x000024ff (0x100) IX[B](B) [25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (==) ATI(0): Write-combining range (0xfd000000,0x400000) (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 512 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/mouse" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/mouse" (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (==) Mouse0: Buttons: 3 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded Could not init font path element /usr/share/fonts/CID/, removing from list! xf86KbdEvents Resource temporarily unavailable (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Mouse0: ps2EnableDataReporting: succeeded (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Mouse0: ps2EnableDataReporting: succeeded
Does this still happen?
yes, it still happens with 6.8.2.
Is there any progress regarding this problem? I've tried to investigate it a bit myself, but it only gets weirder. On line 124 in programs/Xserver/hw/xfree86/os-support/linux/lnx_init.c, the next available VT is queried via VT_OPENQRY, and practically nothing is done with the returned value before it is sent to the log (where it is printed that VT 16 was probed as the next free VT). However, I have tried VT_OPENQRY-ing /dev/vc/0 myself, and the result was not 16 but 25 (which was really the next available VT at that moment).
This usually happens due to a race condition between the display manager, the X server and the gettys at system startup. Possible workarounds: * Most display mangers seem to explicitly pass vtX to the X server by default these days. * Move the startup of display manager and X server 'further apart' from the startup of the gettys or whatever reserves the VTs for them.
I do not use a display manager and X is not started during init, I run it manually with startx long after all gettys have started. The VT that it incorrectly probes is always 16, there is no variation there. I have altered by startx script to explicitly state a fixed VT, but this has caused minor problems in the past (I tend to forget to change startx after X.org upgrade thus finding myself with no working keyboard again, and also it is inconvenient to run two X instances on different VTs when the VT is hardcoded in the startx script).
I see, thanks for clarifying. It sounds then like the X server can't reserve VTs beyond 16 for some reason. As for the startx workaround, I suggest creating a wrapper script in a non-system-managed location such as /usr/local/bin that calls the real thing something like /usr/X11R6/bin/startx -- vtX or just adding the vtX argument manually on the startx line.
Did Michels workaround resolve the problem?
Ping!
Closing due to the lack of activity from the bug poster.
Sorry for the delay. Yes, explicitly specifying the terminal works and I've been using this workaround ever since I figured out that the problem is the wrong terminal allocation. I even wrote a perl script to determine the actual first free terminal and launch X on it, since from time to time I need two instances of X running and hard-coding the terminal is not always useful.
Sorry about the phenomenal bug spam, guys. Adding xorg-team@ to the QA contact so bugs don't get lost in future.
This can't still be a problem, can it?
No response.
Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.