Attachment 34191 Details for Bug 27158 – X server log file

X server log file

Xorg.0.log (text/plain), 20.93 KB, created by Mark Cave-Ayland on 2010-03-18 02:41:11 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mark Cave-Ayland

Created: 2010-03-18 02:41:11 UTC

Size: 20.93 KB

patch

obsolete

>
>X.Org X Server 1.7.5
>Release Date: 2010-02-16
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.32.8-dsa-amd64 x86_64 Debian
>Current Operating System: Linux display2 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64
>Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/rootvg-slash ro quiet
>Build Date: 16 February 2010  10:23:38AM
>xorg-server 2:1.7.5-1 (buildd@brahms.debian.org) 
>Current version of pixman: 0.16.4
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 16 17:34:56 2010
>(II) Loader magic: 0x7c1e20
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 6.0
>	X.Org XInput driver : 7.0
>	X.Org Server Extension : 2.0
>(++) using VT number 8
>
>(--) PCI:*(0:0:2:0) 8086:2e22:1025:0257 Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
>(--) PCI: (0:0:2:1) 8086:2e23:1025:0257 Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe900000/1048576
>(==) Using default built-in configuration (30 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default intel Device 0"
>		Driver	"intel"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default intel Screen 0"
>		Device	"Builtin Default intel Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default fbdev Device 0"
>		Driver	"fbdev"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default fbdev Screen 0"
>		Device	"Builtin Default fbdev Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default intel Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>		Screen	"Builtin Default fbdev Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default intel Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default intel Device 0"
>(==) No monitor specified for screen "Builtin Default intel Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default fbdev Device 0"
>(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
>	Entry deleted from font path.
>(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
>	Entry deleted from font path.
>(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
>	Entry deleted from font path.
>	(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
>(==) FontPath set to:
>	/usr/share/fonts/X11/misc,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on udev to provide the list of input devices.
>	If no devices become available, reconfigure udev or disable AutoAddDevices.
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) LoadModule: "extmod"
>(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension SELinux
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "record"
>(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension RECORD
>(II) LoadModule: "dri"
>(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "dri2"
>(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
>(II) Module dri2: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 1.1.0
>	ABI class: X.Org Server Extension, version 2.0
>(II) Loading extension DRI2
>(II) LoadModule: "intel"
>(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.7.3.902, module version = 2.9.1
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 6.0
>(II) LoadModule: "vesa"
>(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
>(II) Module vesa: vendor="X.Org Foundation"
>	compiled for 1.7.4, module version = 2.3.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 6.0
>(II) LoadModule: "fbdev"
>(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
>(II) Module fbdev: vendor="X.Org Foundation"
>	compiled for 1.7.0, module version = 0.4.1
>	ABI class: X.Org Video Driver, version 6.0
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
>	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
>	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
>(II) VESA: driver for VESA chipsets: vesa
>(II) FBDEV: driver for framebuffer: fbdev
>(II) Primary Device is: PCI 00@00:02:0
>(WW) Falling back to old probe method for vesa
>(WW) Falling back to old probe method for fbdev
>(II) Loading sub module "fbdevhw"
>(II) LoadModule: "fbdevhw"
>(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
>(II) Module fbdevhw: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 0.0.2
>	ABI class: X.Org Video Driver, version 6.0
>(EE) open /dev/fb0: No such file or directory
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/lib/xorg/modules/libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 6.0
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 9, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 9, (OK)
>drmOpenByBusid: drmOpenMinor returns 9
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) intel(0): Creating default Display subsection in Screen section
>	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (--) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
>(--) intel(0): Chipset: "G45/G43"
>(--) intel(0): Linear framebuffer at 0xD0000000
>(--) intel(0): IO registers at addr 0xFE400000 size 4194304
>(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
>(II) intel(0): No SDVO device is found in VBT
>(II) intel(0): 2 display pipes available.
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA has no monitor section
>xf86TokenToOptinfo: table is NULL
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
>(II) intel(0): No SDVO device found on SDVOB
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
>(II) intel(0): Output HDMI-1 has no monitor section
>(II) intel(0): I2C bus "HDMIDDC_B" initialized.
>(II) intel(0): HDMI output 1 detected
>xf86TokenToOptinfo: table is NULL
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
>(II) intel(0): No SDVO device found on SDVOC
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
>(II) intel(0): EDID for output VGA
>(II) intel(0): I2C device "HDMIDDC_B:ddc2" registered at address 0xA0.
>(II) intel(0): EDID for output HDMI-1
>(II) intel(0): Manufacturer: PHL  Model: 8550  Serial#: 206
>(II) intel(0): Year: 2008  Week: 2
>(II) intel(0): EDID Version: 1.3
>(II) intel(0): Digital Display Input
>(II) intel(0): Max Image Size [cm]: horiz.: 102  vert.: 57
>(II) intel(0): Gamma: 2.20
>(II) intel(0): DPMS capabilities: Off
>(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
>(II) intel(0): First detailed timing is preferred mode
>(II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.280 greenY: 0.600
>(II) intel(0): blueX: 0.150 blueY: 0.050   whiteX: 0.272 whiteY: 0.277
>(II) intel(0): Supported established timings:
>(II) intel(0): 720x400@70Hz
>(II) intel(0): 640x480@60Hz
>(II) intel(0): 640x480@72Hz
>(II) intel(0): 640x480@75Hz
>(II) intel(0): 800x600@60Hz
>(II) intel(0): 1024x768@60Hz
>(II) intel(0): 1280x1024@75Hz
>(II) intel(0): Manufacturer's mask: 0
>(II) intel(0): Supported standard timings:
>(II) intel(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
>(II) intel(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
>(II) intel(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
>(II) intel(0): Supported detailed timing:
>(II) intel(0): clock: 148.5 MHz   Image Size:  1018 x 573 mm
>(II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
>(II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
>(II) intel(0): Serial No: 000206
>(II) intel(0): Ranges: V min: 49 V max: 86 Hz, H min: 31 H max: 92 kHz, PixClock max 170 MHz
>(II) intel(0): Monitor name: BDL4631V
>(II) intel(0): Number of EDID sections to follow: 1
>(II) intel(0): EDID (in hex):
>(II) intel(0): 	00ffffffffffff00410c5085ce000000
>(II) intel(0): 	02120103806639782aeebca354479926
>(II) intel(0): 	0c4547ad0900d1c0a940818001010101
>(II) intel(0): 	010101010101023a801871382d40582c
>(II) intel(0): 	4500fa3d3200001e000000ff00303030
>(II) intel(0): 	3230360a202020202020000000fd0031
>(II) intel(0): 	561f5c11000a202020202020000000fc
>(II) intel(0): 	0042444c34363331560a202020200141
>(II) intel(0): 	020321714e900504031f141312010206
>(II) intel(0): 	07111623097f078301000065030c0010
>(II) intel(0): 	00023a801871382d40582c4500fa3d32
>(II) intel(0): 	00001e011d007251d01e206e285500fa
>(II) intel(0): 	3d3200001e8c0ad08a20e02d10103e96
>(II) intel(0): 	00fa3d32000018011d8018711c162058
>(II) intel(0): 	2c2500fa3d3200009e023a80d072382d
>(II) intel(0): 	40102c4580fa3d3200001e00000000b5
>(II) intel(0): EDID vendor "PHL", prod id 34128
>(II) intel(0): Not using mode "1920x1080" (bad mode clock/interlace/doublescan)
>(II) intel(0): Printing probed modes for output HDMI-1
>(II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
>(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
>(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output HDMI-1 connected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output HDMI-1 using initial mode 1920x1080
>(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
>(II) intel(0): detected 512 kB GTT.
>(II) intel(0): detected 32764 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/lib/xorg/modules/libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.7.5, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x20000120
>(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x20000000
>(II) UnloadModule: "vesa"
>(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
>(II) UnloadModule: "fbdev"
>(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
>(II) UnloadModule: "fbdevhw"
>(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
>(==) Depth 24 pixmap format is 32 bpp
>(II) intel(0): Kernel reported 474368 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 1897468 kB available
>(II) intel(0): [DRI2] Setup complete
>(**) intel(0): Framebuffer compression disabled
>(**) intel(0): Tiling enabled
>(**) intel(0): SwapBuffers wait enabled
>(==) intel(0): VideoRam: 262144 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) UXA(0): Driver registered support for the following operations:
>(II)         solid
>(II)         copy
>(II)         composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x01fff000:            end of stolen memory
>(II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x01fff000:            start of memory manager
>(II) intel(0): 0x02020000-0x02808fff: front buffer (8100 kB) X tiled
>(II) intel(0): 0x02820000-0x02829fff: HW cursors (40 kB)
>(II) intel(0): 0x10000000:            end of memory manager
>(WW) intel(0): ESR is 0x00000001
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is off
>(II) intel(0):   Display plane B is now disabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output HDMI-1 is connected to pipe A
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(==) intel(0): DPMS enabled
>(==) intel(0): Intel XvMC decoder disabled
>(II) intel(0): Set up textured video
>(II) intel(0): direct rendering: DRI2 Enabled
>(--) RandR disabled
>(II) Initializing built-in extension Generic Event Extension
>(II) Initializing built-in extension SHAPE
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension BIG-REQUESTS
>(II) Initializing built-in extension SYNC
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-MISC
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>SELinux: Disabled on system, not enabling in X server
>record: RECORD extension enabled at configure time.
>record: This extension is known to be broken, disabling extension now..
>record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_make_current_read
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
>(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
>(II) GLX: Initialized DRI2 GL provider for screen 0
>(II) intel(0): Setting screen physical size to 508 x 285
>(II) config/udev: Adding input device "Power Button" (/dev/input/event2)
>(II) LoadModule: "evdev"
>(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.7.3.902, module version = 2.3.2
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 7.0
>(**) "Power Button": always reports core events
>(**) "Power Button": Device: "/dev/input/event2"
>(II) "Power Button": Found keys
>(II) "Power Button": Configuring as keyboard
>(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "pc105"
>(**) Option "xkb_layout" "gb"
>(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
>(**) "Power Button": always reports core events
>(**) "Power Button": Device: "/dev/input/event1"
>(II) "Power Button": Found keys
>(II) "Power Button": Configuring as keyboard
>(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
>(**) Option "xkb_rules" "evdev"
>(**) Option "xkb_model" "pc105"
>(**) Option "xkb_layout" "gb"
>(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
>(**) "Macintosh mouse button emulation": always reports core events
>(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
>(II) "Macintosh mouse button emulation": Found 3 mouse buttons
>(II) "Macintosh mouse button emulation": Found relative axes
>(II) "Macintosh mouse button emulation": Found x and y relative axes
>(II) "Macintosh mouse button emulation": Configuring as mouse
>(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
>(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
>(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
>(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
>(II) "Macintosh mouse button emulation": initialized for relative axes.
>(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
>(**) "Macintosh mouse button emulation": always reports core events
>(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
>(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
>(II) UnloadModule: "evdev"
>(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
>(WW) intel(0): i830_uxa_prepare_access: bo map failed
>
>Fatal server error:
>Failed to submit batchbuffer: Input/output error
>
>
>Please consult the The X.Org Foundation support 
>	 at http://wiki.x.org
> for help. 
>Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>
>(II) "Power Button": Close
>(II) UnloadModule: "evdev"
>(II) "Power Button": Close
>(II) UnloadModule: "evdev"
>(II) "Macintosh mouse button emulation": Close
>(II) UnloadModule: "evdev"
>(II) AIGLX: Suspending AIGLX clients for VT switch

Actions: View

Attachments on bug 27158: 34187 | 34188 | 34189 | 34190 | 34191

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.