X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.8-dsa-amd64 x86_64 Debian
Current Operating System: Linux display2 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/rootvg-slash ro quiet
Build Date: 16 February 2010  10:23:38AM
xorg-server 2:1.7.5-1 (buildd@brahms.debian.org) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 16 17:34:56 2010
(II) Loader magic: 0x7c1e20
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 8

(--) PCI:*(0:0:2:0) 8086:2e22:1025:0257 Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
(--) PCI: (0:0:2:1) 8086:2e23:1025:0257 Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe900000/1048576
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 2.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.7.0, module version = 0.4.1
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 0.0.2
	ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
(--) intel(0): Chipset: "G45/G43"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFE400000 size 4194304
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): I2C device "HDMIDDC_B:ddc2" registered at address 0xA0.
(II) intel(0): EDID for output HDMI-1
(II) intel(0): Manufacturer: PHL  Model: 8550  Serial#: 206
(II) intel(0): Year: 2008  Week: 2
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 102  vert.: 57
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.280 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.050   whiteX: 0.272 whiteY: 0.277
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
(II) intel(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) intel(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 148.5 MHz   Image Size:  1018 x 573 mm
(II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) intel(0): Serial No: 000206
(II) intel(0): Ranges: V min: 49 V max: 86 Hz, H min: 31 H max: 92 kHz, PixClock max 170 MHz
(II) intel(0): Monitor name: BDL4631V
(II) intel(0): Number of EDID sections to follow: 1
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff00410c5085ce000000
(II) intel(0): 	02120103806639782aeebca354479926
(II) intel(0): 	0c4547ad0900d1c0a940818001010101
(II) intel(0): 	010101010101023a801871382d40582c
(II) intel(0): 	4500fa3d3200001e000000ff00303030
(II) intel(0): 	3230360a202020202020000000fd0031
(II) intel(0): 	561f5c11000a202020202020000000fc
(II) intel(0): 	0042444c34363331560a202020200141
(II) intel(0): 	020321714e900504031f141312010206
(II) intel(0): 	07111623097f078301000065030c0010
(II) intel(0): 	00023a801871382d40582c4500fa3d32
(II) intel(0): 	00001e011d007251d01e206e285500fa
(II) intel(0): 	3d3200001e8c0ad08a20e02d10103e96
(II) intel(0): 	00fa3d32000018011d8018711c162058
(II) intel(0): 	2c2500fa3d3200009e023a80d072382d
(II) intel(0): 	40102c4580fa3d3200001e00000000b5
(II) intel(0): EDID vendor "PHL", prod id 34128
(II) intel(0): Not using mode "1920x1080" (bad mode clock/interlace/doublescan)
(II) intel(0): Printing probed modes for output HDMI-1
(II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA disconnected
(II) intel(0): Output HDMI-1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output HDMI-1 using initial mode 1920x1080
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x20000120
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x20000000
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 474368 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1897468 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x01fff000:            end of stolen memory
(II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000:            start of memory manager
(II) intel(0): 0x02020000-0x02808fff: front buffer (8100 kB) X tiled
(II) intel(0): 0x02820000-0x02829fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output HDMI-1 is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 508 x 285
(II) config/udev: Adding input device "Power Button" (/dev/input/event2)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event2"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(WW) intel(0): i830_uxa_prepare_access: bo map failed

Fatal server error:
Failed to submit batchbuffer: Input/output error


Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Macintosh mouse button emulation": Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch