Attachment 32985 Details for Bug 26372 – Dmesg showing errors

Dmesg showing errors

dmesg.intel (text/plain), 44.63 KB, created by Mike Lothian on 2010-02-01 15:36:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mike Lothian

Created: 2010-02-01 15:36:28 UTC

Size: 44.63 KB

patch

obsolete

>Linux version 2.6.33-rc5-drm (root@tau) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #101 SMP PREEMPT Mon Feb 1 03:07:17 GMT 2010
>Command line: BOOT_IMAGE=Drm64 ro root=807 usbcore.autosuspend=1 snd-hda-intel.model=ultra acpi_backlight=vendor nox
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bd6a1000 (usable)
> BIOS-e820: 00000000bd6a1000 - 00000000bd6a7000 (reserved)
> BIOS-e820: 00000000bd6a7000 - 00000000bd7bd000 (usable)
> BIOS-e820: 00000000bd7bd000 - 00000000bd80f000 (reserved)
> BIOS-e820: 00000000bd80f000 - 00000000bd908000 (usable)
> BIOS-e820: 00000000bd908000 - 00000000bdb0f000 (reserved)
> BIOS-e820: 00000000bdb0f000 - 00000000bdb18000 (usable)
> BIOS-e820: 00000000bdb18000 - 00000000bdb1f000 (reserved)
> BIOS-e820: 00000000bdb1f000 - 00000000bdb64000 (usable)
> BIOS-e820: 00000000bdb64000 - 00000000bdb9f000 (ACPI NVS)
> BIOS-e820: 00000000bdb9f000 - 00000000bdc00000 (ACPI data)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>NX (Execute Disable) protection: active
>DMI present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>No AGP bridge found
>last_pfn = 0x140000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-D3FFF write-protect
>  D4000-D7FFF uncachable
>  D8000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0C0000000 mask FC0000000 uncachable
>  1 base 0BE000000 mask FFE000000 uncachable
>  2 base 000000000 mask F00000000 write-back
>  3 base 100000000 mask FC0000000 write-back
>  4 base 0BDC00000 mask FFFC00000 uncachable
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 3GB, range: 1GB, type UC
>reg 1, base: 3040MB, range: 32MB, type UC
>reg 2, base: 0GB, range: 4GB, type WB
>reg 3, base: 4GB, range: 1GB, type WB
>reg 4, base: 3036MB, range: 4MB, type UC
>total RAM covered: 4060M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3036MB, range: 4MB, type UC
>reg 3, base: 3040MB, range: 32MB, type UC
>reg 4, base: 4GB, range: 1GB, type WB
>e820 update range: 00000000bdc00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xbdb64 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000bdb64000
> 0000000000 - 00bda00000 page 2M
> 00bda00000 - 00bdb64000 page 4k
>kernel direct mapping tables up to bdb64000 @ 16000-1b000
>init_memory_mapping: 0000000100000000-0000000140000000
> 0100000000 - 0140000000 page 2M
>kernel direct mapping tables up to 140000000 @ 19000-1f000
>ACPI: RSDP 00000000000f72d0 00024 (v02 PTLTD )
>ACPI: XSDT 00000000bdbf8329 00074 (v01 SECCSD LH43STAR 06040000  LTP 00000000)
>ACPI: FACP 00000000bdbe8000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
>ACPI: DSDT 00000000bdbe9000 067A3 (v02 Intel  CANTIGA  06040000 INTL 20050624)
>ACPI: FACS 00000000bdb9efc0 00040
>ACPI: HPET 00000000bdbfed86 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: MCFG 00000000bdbfedbe 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: APIC 00000000bdbfedfa 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: BOOT 00000000bdbfee62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
>ACPI: SLIC 00000000bdbfee8a 00176 (v01 SECCSD LH43STAR 06040000  LTP 00000000)
>ACPI: SSDT 00000000bdbf83c5 000B6 (v01 BrtRef  DD01BRT 00001000 INTL 20050624)
>ACPI: SSDT 00000000bdbe7000 005F9 (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: SSDT 00000000bdbe6000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
>ACPI: SSDT 00000000bdbe5000 0020F (v01  PmRef    ApTst 00003000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>(8 early reservations) ==> bootmem [0000000000 - 0140000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0001000000 - 00017a5fbc]    TEXT DATA BSS ==> [0001000000 - 00017a5fbc]
>  #2 [000009e400 - 0000100000]    BIOS reserved ==> [000009e400 - 0000100000]
>  #3 [00017a6000 - 00017a61e0]              BRK ==> [00017a6000 - 00017a61e0]
>  #4 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
>  #5 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
>  #6 [0000016000 - 0000019000]          PGTABLE ==> [0000016000 - 0000019000]
>  #7 [0000019000 - 000001a000]          PGTABLE ==> [0000019000 - 000001a000]
> [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00140000
>Movable zone start PFN for each node
>early_node_map[7] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x000bd6a1
>    0: 0x000bd6a7 -> 0x000bd7bd
>    0: 0x000bd80f -> 0x000bd908
>    0: 0x000bdb0f -> 0x000bdb18
>    0: 0x000bdb1f -> 0x000bdb64
>    0: 0x00100000 -> 0x00140000
>On node 0 totalpages: 1038476
>  DMA zone: 56 pages used for memmap
>  DMA zone: 108 pages reserved
>  DMA zone: 3818 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 758070 pages, LIFO batch:31
>  Normal zone: 3584 pages used for memmap
>  Normal zone: 258560 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at bdc00000 (gap: bdc00000:42400000)
>setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff880028200000 s76120 r8192 d22184 u1048576
>pcpu-alloc: s76120 r8192 d22184 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1020448
>Kernel command line: BOOT_IMAGE=Drm64 ro root=807 usbcore.autosuspend=1 snd-hda-intel.model=ultra acpi_backlight=vendor nox
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 4015212k/5242880k available (3778k kernel code, 1088976k absent, 137716k reserved, 3027k data, 416k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Experimental preemptable hierarchical RCU implementation.
>NR_IRQS:320
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1994.871 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.74 BogoMIPS (lpj=1994871)
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Core revision 20091214
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz stepping 0d
>Booting Node   0, Processors  #1 Ok.
>Brought up 2 CPUs
>Total of 2 processors activated (7979.54 BogoMIPS).
>devtmpfs: initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: Power Resource [FN00] (off)
>ACPI: Power Resource [FN01] (off)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
>pci 0000:00:02.0: reg 10: [mem 0xf6000000-0xf63fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
>pci 0000:00:02.1: reg 10: [mem 0xf6400000-0xf64fffff 64bit]
>pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
>pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
>pci 0000:00:1a.2: reg 20: [io  0x1860-0x187f]
>pci 0000:00:1a.7: reg 10: [mem 0xf6704800-0xf6704bff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xf6700000-0xf6703fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
>pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
>pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
>pci 0000:00:1d.7: reg 10: [mem 0xf6704c00-0xf6704fff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: reg 10: [io  0x1818-0x181f]
>pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
>pci 0000:00:1f.2: reg 18: [io  0x1810-0x1817]
>pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
>pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
>pci 0000:00:1f.2: reg 24: [mem 0xf6704000-0xf67047ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
>pci 0000:02:00.0: reg 10: [mem 0xf3000000-0xf300ffff 64bit]
>pci 0000:02:00.0: PME# supported from D3hot
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf3000000-0xf3ffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 04-05]
>pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf4ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
>pci 0000:06:00.0: reg 10: [mem 0xf5000000-0xf5003fff 64bit]
>pci 0000:06:00.0: reg 18: [io  0x4000-0x40ff]
>pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:06:00.0: supports D1 D2
>pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:06:00.0: PME# disabled
>pci 0000:00:1c.3: PCI bridge to [bus 06-07]
>pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.3:   bridge window [mem 0xf5000000-0xf5ffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cfg80211: Calling CRDA to update world regulatory domain
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x0480-0x048f] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x047f] has been reserved
>system 00:05: [io  0x0480-0x048f] has been reserved
>system 00:05: [io  0x1180-0x11ff] has been reserved
>system 00:05: [io  0x164e-0x164f] has been reserved
>system 00:05: [io  0x5000-0x500f] has been reserved
>system 00:05: [io  0xfe00] has been reserved
>system 00:06: [io  0x06a0-0x06af] has been reserved
>system 00:06: [io  0x06b0-0x06ff] has been reserved
>system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
>system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit]
>pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff 64bit] (PCI address [0xc0000000-0xc00000ff]
>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf3000000-0xf3ffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 04-05]
>pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf4ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
>pci 0000:06:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref]
>pci 0000:00:1c.3: PCI bridge to [bus 06-07]
>pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.3:   bridge window [mem 0xf5000000-0xf5ffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 08-08]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem disabled]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
>pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff]
>pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf4ffffff]
>pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref]
>pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf5ffffff]
>pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf2ffffff 64bit pref]
>pci_bus 0000:08: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:08: resource 4 [mem 0x00000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Simple Boot Flag at 0x37 set to 0x1
>microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
>microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>fuse init (API version 7.13)
>msgmni has been set to 7844
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp: Slot [1] registered
>ACPI: AC Adapter [ADP1] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID0]
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>ACPI: Fan [FAN0] (off)
>ACPI: Fan [FAN1] (off)
>ACPI: SSDT 00000000bdb1ac20 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 00000000bdb18020 00C78 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>ACPI: SSDT 00000000bdb19ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
>ACPI: SSDT 00000000bdb19f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (73 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (73 C)
>ACPI: Battery Slot [BAT1] (battery present)
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel GM45 Chipset
>agpgart-intel 0000:00:00.0: detected 32764K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 27 for MSI/MSI-X
>[drm] set up 31M of stolen space
>i915 0000:00:02.0: BAR 6: can't assign [??? 0 flags 0x0] (bogus alignment)
>[drm] failed to find VBIOS tables
>Console: switching to colour frame buffer device 160x50
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704100 irq 28
>ata2: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704180 irq 28
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704300 irq 28
>ata6: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704380 irq 28
>sky2 driver version 1.26
>sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>sky2 0000:06:00.0: setting latency timer to 64
>sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
>sky2 0000:06:00.0: irq 29 for MSI/MSI-X
>sky2 eth0: addr 00:13:77:91:85:30
>ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ath5k 0000:02:00.0: setting latency timer to 64
>ath5k 0000:02:00.0: registered as 'phy0'
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: Hitachi HTS542516K9A300, BBCOC3EP, max UDMA/133
>ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ath: EEPROM regdomain: 0x65
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: 00
>ath: Regpair used: 0x65
> sda:
>phy0: Selected rate control algorithm 'minstrel'
>ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf6704800
> sda1 sda2 sda3 <
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.33-rc5-drm ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6704c00
> sda5 sda6
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.33-rc5-drm ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
> sda7
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
> sda8
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
> sda9
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
> sda10 >
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>hub 8-0:1.0: USB hub found
>sd 0:0:0:0: [sda] Attached SCSI disk
>hub 8-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver usbserial
>usbserial: USB Serial Driver core
>USB Serial support registered for FTDI USB Serial Device
>usbcore: registered new interface driver ftdi_sio
>ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>i2c /dev entries driver
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>Linux video capture interface: v2.00
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>cpuidle: using governor ladder
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda-codec: No codec parser is available
>usbcore: registered new interface driver snd-usb-audio
>ALSA device list:
>  #0: HDA Intel at 0xf6700000 irq 30
>TCP cubic registered
>NET: Registered protocol family 17
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>registered taskstats version 1
>rtc_cmos 00:07: setting system clock to 2010-02-01 22:13:00 UTC (1265062380)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>usb 1-3: New USB device found, idVendor=0ac8, idProduct=c302
>usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-3: Product: Vega USB 2.0 Camera.
>usb 1-3: Manufacturer: Vimicro Corp.
>uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
>input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input6
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC02, max UDMA/100, ATAPI AN
>ata2.00: applying bridge limits
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  SC02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ata5: SATA link down (SStatus 0 SControl 300)
>usb 6-1: new full speed USB device using uhci_hcd and address 2
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
>usb 6-1: New USB device found, idVendor=0a5c, idProduct=4500
>usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 6-1: Product: BCM2046B1
>usb 6-1: Manufacturer: Broadcom
>hub 6-1:1.0: USB hub found
>hub 6-1:1.0: 3 ports detected
>ata6: SATA link down (SStatus 0 SControl 300)
>EXT4-fs (sda7): INFO: recovery required on readonly filesystem
>EXT4-fs (sda7): write access will be enabled during recovery
>EXT4-fs (sda7): recovery complete
>EXT4-fs (sda7): mounted filesystem with ordered data mode
>VFS: Mounted root (ext2 filesystem) readonly on device 8:7.
>devtmpfs: mounted
>Freeing unused kernel memory: 416k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 296k freed
>Freeing unused kernel memory: 1032k freed
>usb 6-1.1: new full speed USB device using uhci_hcd and address 3
>usb 6-1.1: New USB device found, idVendor=0a5c, idProduct=4502
>usb 6-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input8
>generic-usb 0003:0A5C:4502.0001: input: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.0-1.1/input0
>usb 6-1.2: new full speed USB device using uhci_hcd and address 4
>usb 6-1.2: New USB device found, idVendor=0a5c, idProduct=4503
>usb 6-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input9
>generic-usb 0003:0A5C:4503.0002: input: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.0-1.2/input0
>usb 6-1.3: new full speed USB device using uhci_hcd and address 5
>usb 6-1.3: New USB device found, idVendor=050d, idProduct=016a
>usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 6-1.3: Product: BLUETOOTH USB +EDR ADAPTER v2.1 UHE
>usb 6-1.3: Manufacturer: Broadcom Corp
>usb 6-1.3: SerialNumber: 00190E00AE44
>udev: starting version 151
>EXT4-fs (sda5): mounted filesystem with ordered data mode
>EXT4-fs (sda6): mounted filesystem with ordered data mode
>EXT4-fs (sda9): mounted filesystem with ordered data mode
>EXT4-fs (sda10): mounted filesystem with ordered data mode
>sky2 eth0: enabling interface
>wlan0: direct probe to AP 00:0f:b5:7d:44:28 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:0f:b5:7d:44:28 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:0f:b5:7d:44:28 (try 1)
>wlan0: RX AssocResp from 00:0f:b5:7d:44:28 (capab=0x431 status=0 aid=1)
>wlan0: associated
>cfg80211: Calling CRDA for country: GB
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>ath5k phy0: unsupported jumbo
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91503 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91514 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91519 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91530 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91535 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91536 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91546 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91549 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91558 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91563 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91574 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91579 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91590 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91595 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91606 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91611 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91612 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91624 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91629 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91638 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91645 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91655 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91663 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91667 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91670 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91671 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91676 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91677 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91689 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91694 at 91479)
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
>render error detected, EIR: 0x00000000
>[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91705 at 91479)

Actions: View

Attachments on bug 26372: 32985 | 32986

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.