Linux version 2.6.33-rc5-drm (root@tau) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #101 SMP PREEMPT Mon Feb 1 03:07:17 GMT 2010 Command line: BOOT_IMAGE=Drm64 ro root=807 usbcore.autosuspend=1 snd-hda-intel.model=ultra acpi_backlight=vendor nox BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e400 (usable) BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bd6a1000 (usable) BIOS-e820: 00000000bd6a1000 - 00000000bd6a7000 (reserved) BIOS-e820: 00000000bd6a7000 - 00000000bd7bd000 (usable) BIOS-e820: 00000000bd7bd000 - 00000000bd80f000 (reserved) BIOS-e820: 00000000bd80f000 - 00000000bd908000 (usable) BIOS-e820: 00000000bd908000 - 00000000bdb0f000 (reserved) BIOS-e820: 00000000bdb0f000 - 00000000bdb18000 (usable) BIOS-e820: 00000000bdb18000 - 00000000bdb1f000 (reserved) BIOS-e820: 00000000bdb1f000 - 00000000bdb64000 (usable) BIOS-e820: 00000000bdb64000 - 00000000bdb9f000 (ACPI NVS) BIOS-e820: 00000000bdb9f000 - 00000000bdc00000 (ACPI data) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-D7FFF uncachable D8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0C0000000 mask FC0000000 uncachable 1 base 0BE000000 mask FFE000000 uncachable 2 base 000000000 mask F00000000 write-back 3 base 100000000 mask FC0000000 write-back 4 base 0BDC00000 mask FFFC00000 uncachable 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 3GB, range: 1GB, type UC reg 1, base: 3040MB, range: 32MB, type UC reg 2, base: 0GB, range: 4GB, type WB reg 3, base: 4GB, range: 1GB, type WB reg 4, base: 3036MB, range: 4MB, type UC total RAM covered: 4060M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3036MB, range: 4MB, type UC reg 3, base: 3040MB, range: 32MB, type UC reg 4, base: 4GB, range: 1GB, type WB e820 update range: 00000000bdc00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbdb64 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bdb64000 0000000000 - 00bda00000 page 2M 00bda00000 - 00bdb64000 page 4k kernel direct mapping tables up to bdb64000 @ 16000-1b000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ 19000-1f000 ACPI: RSDP 00000000000f72d0 00024 (v02 PTLTD ) ACPI: XSDT 00000000bdbf8329 00074 (v01 SECCSD LH43STAR 06040000 LTP 00000000) ACPI: FACP 00000000bdbe8000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) ACPI: DSDT 00000000bdbe9000 067A3 (v02 Intel CANTIGA 06040000 INTL 20050624) ACPI: FACS 00000000bdb9efc0 00040 ACPI: HPET 00000000bdbfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: MCFG 00000000bdbfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: APIC 00000000bdbfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 00000000bdbfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 00000000bdbfee8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) ACPI: SSDT 00000000bdbf83c5 000B6 (v01 BrtRef DD01BRT 00001000 INTL 20050624) ACPI: SSDT 00000000bdbe7000 005F9 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: SSDT 00000000bdbe6000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 00000000bdbe5000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00017a5fbc] TEXT DATA BSS ==> [0001000000 - 00017a5fbc] #2 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] #3 [00017a6000 - 00017a61e0] BRK ==> [00017a6000 - 00017a61e0] #4 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] #5 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] #6 [0000016000 - 0000019000] PGTABLE ==> [0000016000 - 0000019000] #7 [0000019000 - 000001a000] PGTABLE ==> [0000019000 - 000001a000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000bd6a1 0: 0x000bd6a7 -> 0x000bd7bd 0: 0x000bd80f -> 0x000bd908 0: 0x000bdb0f -> 0x000bdb18 0: 0x000bdb1f -> 0x000bdb64 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1038476 DMA zone: 56 pages used for memmap DMA zone: 108 pages reserved DMA zone: 3818 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 758070 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at bdc00000 (gap: bdc00000:42400000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880028200000 s76120 r8192 d22184 u1048576 pcpu-alloc: s76120 r8192 d22184 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1020448 Kernel command line: BOOT_IMAGE=Drm64 ro root=807 usbcore.autosuspend=1 snd-hda-intel.model=ultra acpi_backlight=vendor nox PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Memory: 4015212k/5242880k available (3778k kernel code, 1088976k absent, 137716k reserved, 3027k data, 416k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Experimental preemptable hierarchical RCU implementation. NR_IRQS:320 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1994.871 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.74 BogoMIPS (lpj=1994871) Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20091214 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz stepping 0d Booting Node 0, Processors #1 Ok. Brought up 2 CPUs Total of 2 processors activated (7979.54 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [FN00] (off) ACPI: Power Resource [FN01] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) pci 0000:00:02.0: reg 10: [mem 0xf6000000-0xf63fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] pci 0000:00:02.1: reg 10: [mem 0xf6400000-0xf64fffff 64bit] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f] pci 0000:00:1a.7: reg 10: [mem 0xf6704800-0xf6704bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf6700000-0xf6703fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df] pci 0000:00:1d.7: reg 10: [mem 0xf6704c00-0xf6704fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff] pci 0000:00:1f.2: reg 24: [mem 0xf6704000-0xf67047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] pci 0000:02:00.0: reg 10: [mem 0xf3000000-0xf300ffff 64bit] pci 0000:02:00.0: PME# supported from D3hot pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf3ffffff] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-05] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf4ffffff] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref] pci 0000:06:00.0: reg 10: [mem 0xf5000000-0xf5003fff 64bit] pci 0000:06:00.0: reg 18: [io 0x4000-0x40ff] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:06:00.0: supports D1 D2 pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 06-07] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf5000000-0xf5ffffff] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *5) ACPI: PCI Interrupt Link [LNKD] (IRQs *5) ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *10) ACPI: PCI Interrupt Link [LNKG] (IRQs *5) ACPI: PCI Interrupt Link [LNKH] (IRQs *5) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.21. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x0480-0x048f] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0480-0x048f] has been reserved system 00:05: [io 0x1180-0x11ff] has been reserved system 00:05: [io 0x164e-0x164f] has been reserved system 00:05: [io 0x5000-0x500f] has been reserved system 00:05: [io 0xfe00] has been reserved system 00:06: [io 0x06a0-0x06af] has been reserved system 00:06: [io 0x06b0-0x06ff] has been reserved system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff 64bit] (PCI address [0xc0000000-0xc00000ff] pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf3ffffff] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-05] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf4ffffff] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref] pci 0000:06:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref] pci 0000:00:1c.3: PCI bridge to [bus 06-07] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf5000000-0xf5ffffff] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 08-08] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf4ffffff] pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf5ffffff] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf2ffffff 64bit pref] pci_bus 0000:08: resource 3 [io 0x0000-0xffff] pci_bus 0000:08: resource 4 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Simple Boot Flag at 0x37 set to 0x1 microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 microcode: Microcode Update Driver: v2.00 , Peter Oruba HugeTLB registered 2 MB page size, pre-allocated 0 pages Slow work thread pool: Starting up Slow work thread pool: Ready fuse init (API version 7.13) msgmni has been set to 7844 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered ACPI: AC Adapter [ADP1] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: Fan [FAN0] (off) ACPI: Fan [FAN1] (off) ACPI: SSDT 00000000bdb1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 00000000bdb18020 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet ACPI: SSDT 00000000bdb19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 00000000bdb19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (73 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (73 C) ACPI: Battery Slot [BAT1] (battery present) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel GM45 Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 27 for MSI/MSI-X [drm] set up 31M of stolen space i915 0000:00:02.0: BAR 6: can't assign [??? 0 flags 0x0] (bogus alignment) [drm] failed to find VBIOS tables Console: switching to colour frame buffer device 160x50 fb0: inteldrmfb frame buffer device registered panic notifier input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704100 irq 28 ata2: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704180 irq 28 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704300 irq 28 ata6: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704380 irq 28 sky2 driver version 1.26 sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:06:00.0: setting latency timer to 64 sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:06:00.0: irq 29 for MSI/MSI-X sky2 eth0: addr 00:13:77:91:85:30 ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ath5k 0000:02:00.0: setting latency timer to 64 ath5k 0000:02:00.0: registered as 'phy0' ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS542516K9A300, BBCOC3EP, max UDMA/133 ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ath: EEPROM regdomain: 0x65 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x65 sda: phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf6704800 sda1 sda2 sda3 < ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33-rc5-drm ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6704c00 sda5 sda6 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33-rc5-drm ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 sda7 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 sda8 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 sda9 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 sda10 > hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.33-rc5-drm uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found sd 0:0:0:0: [sda] Attached SCSI disk hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb cpuidle: using governor ladder usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda-codec: No codec parser is available usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: HDA Intel at 0xf6700000 irq 30 TCP cubic registered NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' registered taskstats version 1 rtc_cmos 00:07: setting system clock to 2010-02-01 22:13:00 UTC (1265062380) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found usb 1-3: new high speed USB device using ehci_hcd and address 2 usb 1-3: New USB device found, idVendor=0ac8, idProduct=c302 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3: Product: Vega USB 2.0 Camera. usb 1-3: Manufacturer: Vimicro Corp. uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302) input: Vega USB 2.0 Camera. as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input6 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC02, max UDMA/100, ATAPI AN ata2.00: applying bridge limits ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A SC02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ata5: SATA link down (SStatus 0 SControl 300) usb 6-1: new full speed USB device using uhci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 usb 6-1: New USB device found, idVendor=0a5c, idProduct=4500 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: BCM2046B1 usb 6-1: Manufacturer: Broadcom hub 6-1:1.0: USB hub found hub 6-1:1.0: 3 ports detected ata6: SATA link down (SStatus 0 SControl 300) EXT4-fs (sda7): INFO: recovery required on readonly filesystem EXT4-fs (sda7): write access will be enabled during recovery EXT4-fs (sda7): recovery complete EXT4-fs (sda7): mounted filesystem with ordered data mode VFS: Mounted root (ext2 filesystem) readonly on device 8:7. devtmpfs: mounted Freeing unused kernel memory: 416k freed Write protecting the kernel read-only data: 6144k Freeing unused kernel memory: 296k freed Freeing unused kernel memory: 1032k freed usb 6-1.1: new full speed USB device using uhci_hcd and address 3 usb 6-1.1: New USB device found, idVendor=0a5c, idProduct=4502 usb 6-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input8 generic-usb 0003:0A5C:4502.0001: input: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.0-1.1/input0 usb 6-1.2: new full speed USB device using uhci_hcd and address 4 usb 6-1.2: New USB device found, idVendor=0a5c, idProduct=4503 usb 6-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input9 generic-usb 0003:0A5C:4503.0002: input: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.0-1.2/input0 usb 6-1.3: new full speed USB device using uhci_hcd and address 5 usb 6-1.3: New USB device found, idVendor=050d, idProduct=016a usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 6-1.3: Product: BLUETOOTH USB +EDR ADAPTER v2.1 UHE usb 6-1.3: Manufacturer: Broadcom Corp usb 6-1.3: SerialNumber: 00190E00AE44 udev: starting version 151 EXT4-fs (sda5): mounted filesystem with ordered data mode EXT4-fs (sda6): mounted filesystem with ordered data mode EXT4-fs (sda9): mounted filesystem with ordered data mode EXT4-fs (sda10): mounted filesystem with ordered data mode sky2 eth0: enabling interface wlan0: direct probe to AP 00:0f:b5:7d:44:28 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:0f:b5:7d:44:28 (try 1) wlan0: authenticated wlan0: associate with AP 00:0f:b5:7d:44:28 (try 1) wlan0: RX AssocResp from 00:0f:b5:7d:44:28 (capab=0x431 status=0 aid=1) wlan0: associated cfg80211: Calling CRDA for country: GB CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold ath5k phy0: unsupported jumbo [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91503 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91514 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91519 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91530 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91535 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91536 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91546 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91549 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91558 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91563 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91574 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91579 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91590 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91595 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91606 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91611 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91612 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91624 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91629 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91638 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91645 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91655 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91663 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91667 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91670 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91671 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91676 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91677 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91689 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91694 at 91479) [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung render error detected, EIR: 0x00000000 [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 91705 at 91479)