Attachment 30616 Details for Bug 24021 – dmesg when booting with i915.modeset=0 and drm.debug=0x06 on the 2.6.32-rc5 kernel

dmesg when booting with i915.modeset=0 and drm.debug=0x06 on the 2.6.32-rc5 kernel

dmesg_2632rc5 (text/plain), 37.53 KB, created by Damien Lallement on 2009-10-22 01:48:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Damien Lallement

Created: 2009-10-22 01:48:58 UTC

Size: 37.53 KB

patch

obsolete

>Linux version 2.6.32-0.rc5.1.1mdv (pterjan@qadev1.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Mon Oct 19 10:19:09 EDT 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003d38d400 (usable)
> BIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS)
> BIOS-e820: 000000003d38f400 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>last_pfn = 0x3d38d max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask 800000000 write-back
>  1 base 0E0000000 mask FE0000000 uncachable
>  2 base 03DC00000 mask FFFC00000 uncachable
>  3 base 03E000000 mask FFE000000 uncachable
>  4 disabled
>  5 disabled
>  6 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 000000003dc00000 - 0000000040000000 (usable) ==> (reserved)
>e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
>initial memory mapped : 0 - 00c00000
>init_memory_mapping: 0000000000000000-00000000373fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037000000 page 2M
> 0037000000 - 00373fe000 page 4k
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>RAMDISK: 37a0a000 - 37fef189
>Allocated new RAMDISK: 007fd000 - 00de2189
>Move RAMDISK from 0000000037a0a000 - 0000000037fef188 to 007fd000 - 00de2188
>ACPI: RSDP 000fbd10 00024 (v02 DELL  )
>ACPI: XSDT 3d391e00 0006C (v01 DELL    M09     27D9080B ASL  00000061)
>ACPI: FACP 3d391c9c 000F4 (v04 DELL    M09     27D9080B ASL  00000061)
>ACPI: DSDT 3d392400 06707 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
>ACPI: FACS 3d3a0c00 00040
>ACPI: HPET 3d391f00 00038 (v01 DELL    M09     00000001 ASL  00000061)
>ACPI: DMAR 3d3a0400 000F8 (v01 DELL    M09     27D9080B ASL  00000061)
>ACPI: APIC 3d392000 00068 (v01 DELL    M09     27D9080B ASL  00000047)
>ACPI: ASF! 3d391c00 00076 (v32 DELL    M09     27D9080B ASL  00000061)
>ACPI: MCFG 3d391fc0 0003E (v16 DELL    M09     27D9080B ASL  00000061)
>ACPI: TCPA 3d392300 00032 (v01                 00000000 ASL  00000000)
>ACPI: SLIC 3d39209c 00176 (v01 DELL    M09     27D9080B ASL  00000061)
>ACPI: SSDT 3d39032d 0066C (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>95MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 0 - 373fe000
>  node 0 low ram: 00000000 - 373fe000
>  node 0 bootmap 00009000 - 0000fe80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 00007f8f84]    TEXT DATA BSS ==> [0000100000 - 00007f8f84]
>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #5 [00007f9000 - 00007fc17c]              BRK ==> [00007f9000 - 00007fc17c]
>  #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
>  #7 [00007fd000 - 0000de2189]      NEW RAMDISK ==> [00007fd000 - 0000de2189]
>  #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0003d38d
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003d38d
>On node 0 totalpages: 250668
>free_area_init_node: node 0, pgdat c069d020, node_mem_map c1001000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 192 pages used for memmap
>  HighMem zone: 24271 pages, LIFO batch:3
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 40000000:b8000000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 14 pages/cpu @c1800000 s35416 r0 d21928 u2097152
>pcpu-alloc: s35416 r0 d21928 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 248708
>Kernel command line: BOOT_IMAGE=2.6.32rc5-1.1 root=UUID=90848b46-1a0d-4927-975e-02c902d5ff37 resume=UUID=e6b5b283-70bd-46cd-9af2-80da3b6d5302 splash=silent vga=788 i915.modeset=0 drm.debug=0x06
>Unknown boot option `i915.modeset=0': ignoring
>Unknown boot option `drm.debug=0x06': ignoring
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000373fe:0003d38d)
>Memory: 980296k/1003060k available (3822k kernel code, 21996k reserved, 2038k data, 544k init, 97852k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffd54000 - 0xfffff000   (2732 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc06ba000 - 0xc0742000   ( 544 kB)
>      .data : 0xc04bb87b - 0xc06b9348   (2038 kB)
>      .text : 0xc0100000 - 0xc04bb87b   (3822 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Extended CMOS year: 2000
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 2260.728 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.45 BogoMIPS (lpj=2260728)
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 16652 entries in 33 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4521.76 BogoMIPS (lpj=2260883)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 3072K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 6 MCE banks
>CPU1: Thermal monitoring enabled (TM2)
>CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (9043.22 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>Time: 10:39:29  Date: 10/22/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: SSDT 3d3a0c80 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>DMAR: Forcing write-buffer flush capability
>pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
>pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
>pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
>pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
>pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
>pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
>pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-0xf6afffff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
>pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
>pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
>pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
>pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
>pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
>pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-0xf6afbfff]
>pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
>pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-0xf69fffff]
>pci 0000:0c:00.0: supports D1 D2
>pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0c:00.0: PME# disabled
>pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
>pci 0000:09:00.0: reg 10 64bit mmio: [0xf68f0000-0xf68fffff]
>pci 0000:09:00.0: PME# supported from D3hot D3cold
>pci 0000:09:00.0: PME# disabled
>pci 0000:00:1c.4: bridge 32bit mmio: [0xf6800000-0xf68fffff]
>pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
>pci 0000:02:01.0: supports D1 D2
>pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:01.1: reg 10 32bit mmio: [0xf67ff800-0xf67fffff]
>pci 0000:02:01.1: supports D1 D2
>pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.1: PME# disabled
>pci 0000:02:01.2: reg 10 32bit mmio: [0xf67ff700-0xf67ff7ff]
>pci 0000:02:01.2: supports D1 D2
>pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.2: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xf6700000-0xf67fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>system 00:05: ioport range 0xc80-0xcaf has been reserved
>system 00:05: ioport range 0xcc0-0xcff could not be reserved
>system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:0a: ioport range 0xcb0-0xcbb has been reserved
>system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
>system 00:0b: ioport range 0x900-0x92f has been reserved
>system 00:0b: ioport range 0x931-0x933 has been reserved
>system 00:0b: ioport range 0x935-0x97f has been reserved
>system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0b: ioport range 0x1000-0x1005 has been reserved
>system 00:0b: ioport range 0x1008-0x100f has been reserved
>system 00:0c: ioport range 0xf400-0xf4fe has been reserved
>system 00:0c: ioport range 0x1006-0x1007 has been reserved
>system 00:0c: ioport range 0x100a-0x1059 could not be reserved
>system 00:0c: ioport range 0x1060-0x107f has been reserved
>system 00:0c: ioport range 0x1080-0x10bf has been reserved
>system 00:0c: ioport range 0x1100-0x111f has been reserved
>system 00:0c: ioport range 0x1010-0x102f has been reserved
>system 00:0c: ioport range 0x809-0x809 has been reserved
>system 00:0d: iomem range 0x0-0x9efff could not be reserved
>system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
>system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0d: iomem range 0x100000-0x3d38d3ff could not be reserved
>system 00:0d: iomem range 0x3d38d400-0x3dafffff could not be reserved
>system 00:0d: iomem range 0x3db00000-0x3dbfffff has been reserved
>system 00:0d: iomem range 0xffe80000-0xffffffff has been reserved
>system 00:0d: iomem range 0xffa80000-0xffbfffff has been reserved
>system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
>system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
>system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
>system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
>system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
>system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
>system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
>system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
>system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
>pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.0:   MEM window: 0x44000000-0x441fffff
>pci 0000:00:1c.0:   PREFETCH window: 0x00000044200000-0x000000443fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
>pci 0000:00:1c.1:   MEM window: 0xf6900000-0xf69fffff
>pci 0000:00:1c.1:   PREFETCH window: 0x00000044400000-0x000000445fffff
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
>pci 0000:00:1c.4:   IO window: 0x4000-0x4fff
>pci 0000:00:1c.4:   MEM window: 0xf6800000-0xf68fffff
>pci 0000:00:1c.4:   PREFETCH window: 0x00000044600000-0x000000447fffff
>pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:01.0:   IO window: 0x005000-0x0050ff
>pci 0000:02:01.0:   IO window: 0x005400-0x0054ff
>pci 0000:02:01.0:   PREFETCH window: 0x40000000-0x43ffffff
>pci 0000:02:01.0:   MEM window: 0x48000000-0x4bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0x5000-0x5fff
>pci 0000:00:1e.0:   MEM window: 0xf6700000-0xf67fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x43ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:0b: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:0b: resource 1 mem: [0x44000000-0x441fffff]
>pci_bus 0000:0b: resource 2 pref mem [0x44200000-0x443fffff]
>pci_bus 0000:0c: resource 0 io:  [0x3000-0x3fff]
>pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
>pci_bus 0000:0c: resource 2 pref mem [0x44400000-0x445fffff]
>pci_bus 0000:09: resource 0 io:  [0x4000-0x4fff]
>pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff]
>pci_bus 0000:09: resource 2 pref mem [0x44600000-0x447fffff]
>pci_bus 0000:02: resource 0 io:  [0x5000-0x5fff]
>pci_bus 0000:02: resource 1 mem: [0xf6700000-0xf67fffff]
>pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:03: resource 0 io:  [0x5000-0x50ff]
>pci_bus 0000:03: resource 1 io:  [0x5400-0x54ff]
>pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff]
>pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 6036k freed
>DMAR: Host address width 36
>DMAR: DRHD base: 0x000000fed10000 flags: 0x0
>IOMMU fed10000: ver 1:0 cap c9008020e30260 ecap 1000
>DMAR: DRHD base: 0x000000fed11000 flags: 0x0
>IOMMU fed11000: ver 1:0 cap c0000020630260 ecap 1000
>DMAR: DRHD base: 0x000000fed13000 flags: 0x1
>IOMMU fed13000: ver 1:0 cap c9008020630260 ecap 1000
>DMAR: RMRR base: 0x0000003d7e7000 end: 0x0000003d7fffff
>DMAR: RMRR base: 0x0000003dc00000 end: 0x0000003fffffff
>DMAR: No ATSR found
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1256207969.584:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1736
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>vesafb: framebuffer at 0xe0000000, mapped to 0xf7c80000, using 1875k, total 32704k
>vesafb: mode is 800x600x16, linelength=1600, pages=33
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel Mobile IntelÂ® GM45 Express Chipset
>agpgart-intel 0000:00:00.0: detected 32764K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Warning: Keylock active.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>Driver 'rtc_cmos' needs updating - please use bus_type methods
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI No-Shortcut mode
>PM: Checking image partition UUID=e6b5b283-70bd-46cd-9af2-80da3b6d5302
>input: DualPoint Stick as /devices/platform/i8042/serio1/input/input1
>input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 13:868:679
>rtc_cmos 00:03: setting system clock to 2009-10-22 10:39:31 UTC (1256207971)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 544k freed
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button [SBTN]
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>pci 0000:00:02.0: irq 27 for MSI/MSI-X
>acpi device:36: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input7
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 28
>ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 28
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 28
>ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 28
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: TOSHIBA MK8052GSX, LV011D, max UDMA/100
>ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8052GS LV01 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-T20N, A106, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 1:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCCT20N A106 PQ: 0 ANSI: 5
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>EXT4-fs (sda1): mounted filesystem with ordered data mode
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>udev: starting version 146
>ACPI: AC Adapter [AC] (off-line)
>ACPI: SSDT 3d390999 00281 (v01  PmRef   BspIst 00003000 INTL 20050624)
>ACPI: SSDT 3d390df1 005C6 (v01  PmRef   BspCst 00003001 INTL 20050624)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>processor LNXCPU:00: registered as cooling_device1
>ACPI: SSDT 3d390c1a 001D7 (v01  PmRef    ApIst 00003000 INTL 20050624)
>ACPI: SSDT 3d3913b7 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
>processor LNXCPU:01: registered as cooling_device2
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (53 C)
>ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132)
>ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132)
>ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132)
>ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: WMI: Mapper loaded
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv ehci_hcd
>usb usb7: SerialNumber: 0000:00:1a.7
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: EHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv ehci_hcd
>usb usb8: SerialNumber: 0000:00:1d.7
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>i8k: unable to get SMM BIOS version
>Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
>Non-volatile memory driver v1.3
>EXT4-fs (sda6): mounted filesystem with ordered data mode
>Adding 4088500k swap on /dev/sda5.  Priority:-1 extents:1 across:4088500k 
>yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0263]
>yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
>yenta_cardbus 0000:02:01.0: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf6700000 - 0xf67fffff
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
>ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>tg3.c:v3.102 (September 1, 2009)
>tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:09:00.0: setting latency timer to 64
>ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express) MAC address 00:21:9b:da:c8:ee
>eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f67ff800-f67fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 21)
>sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>cfg80211: Calling CRDA to update world regulatory domain
>[drm:i915_driver_open], 
>[drm:i915_driver_open], 
>cfg80211: World regulatory domain updated:
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>b43-phy0: Broadcom 4312 WLAN found (core revision 15)
>b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2
>phy0: Selected rate control algorithm 'minstrel'
>Registered led device: b43-phy0::tx
>Registered led device: b43-phy0::rx
>Registered led device: b43-phy0::radio
>Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
>autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
>   speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
>   hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>   mono: mono_out=0x0
>   dig-out=0x1e/0x1f
>   inputs: mic=0xb, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0
>stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[464fc00020727070]
>hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x01af000e
>input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>tg3 0000:09:00.0: irq 29 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>fuse init (API version 7.13)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (15425 buckets, 61700 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>ClusterIP Version 0.8 loaded successfully
>xt_time: kernel timezone is -0400

Actions: View

Attachments on bug 24021: 29836 | 29918 | 29932 | 29934 | 29935 | 29936 | 30616 | 30624 | 31885

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.