Linux version 2.6.32-0.rc5.1.1mdv (pterjan@qadev1.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Mon Oct 19 10:19:09 EDT 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003d38d400 (usable) BIOS-e820: 000000003d38d400 - 000000003d38f400 (ACPI NVS) BIOS-e820: 000000003d38f400 - 0000000040000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x3d38d max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask 800000000 write-back 1 base 0E0000000 mask FE0000000 uncachable 2 base 03DC00000 mask FFFC00000 uncachable 3 base 03E000000 mask FFE000000 uncachable 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 000000003dc00000 - 0000000040000000 (usable) ==> (reserved) e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) initial memory mapped : 0 - 00c00000 init_memory_mapping: 0000000000000000-00000000373fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4k kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37a0a000 - 37fef189 Allocated new RAMDISK: 007fd000 - 00de2189 Move RAMDISK from 0000000037a0a000 - 0000000037fef188 to 007fd000 - 00de2188 ACPI: RSDP 000fbd10 00024 (v02 DELL ) ACPI: XSDT 3d391e00 0006C (v01 DELL M09 27D9080B ASL 00000061) ACPI: FACP 3d391c9c 000F4 (v04 DELL M09 27D9080B ASL 00000061) ACPI: DSDT 3d392400 06707 (v02 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS 3d3a0c00 00040 ACPI: HPET 3d391f00 00038 (v01 DELL M09 00000001 ASL 00000061) ACPI: DMAR 3d3a0400 000F8 (v01 DELL M09 27D9080B ASL 00000061) ACPI: APIC 3d392000 00068 (v01 DELL M09 27D9080B ASL 00000047) ACPI: ASF! 3d391c00 00076 (v32 DELL M09 27D9080B ASL 00000061) ACPI: MCFG 3d391fc0 0003E (v16 DELL M09 27D9080B ASL 00000061) ACPI: TCPA 3d392300 00032 (v01 00000000 ASL 00000000) ACPI: SLIC 3d39209c 00176 (v01 DELL M09 27D9080B ASL 00000061) ACPI: SSDT 3d39032d 0066C (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 95MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 00009000 - 0000fe80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00007f8f84] TEXT DATA BSS ==> [0000100000 - 00007f8f84] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [00007f9000 - 00007fc17c] BRK ==> [00007f9000 - 00007fc17c] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [00007fd000 - 0000de2189] NEW RAMDISK ==> [00007fd000 - 0000de2189] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0003d38d Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003d38d On node 0 totalpages: 250668 free_area_init_node: node 0, pgdat c069d020, node_mem_map c1001000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 192 pages used for memmap HighMem zone: 24271 pages, LIFO batch:3 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:b8000000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c1800000 s35416 r0 d21928 u2097152 pcpu-alloc: s35416 r0 d21928 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 248708 Kernel command line: BOOT_IMAGE=2.6.32rc5-1.1 root=UUID=90848b46-1a0d-4927-975e-02c902d5ff37 resume=UUID=e6b5b283-70bd-46cd-9af2-80da3b6d5302 splash=silent vga=788 i915.modeset=0 drm.debug=0x06 Unknown boot option `i915.modeset=0': ignoring Unknown boot option `drm.debug=0x06': ignoring PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000373fe:0003d38d) Memory: 980296k/1003060k available (3822k kernel code, 21996k reserved, 2038k data, 544k init, 97852k highmem) virtual kernel memory layout: fixmap : 0xffd54000 - 0xfffff000 (2732 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc06ba000 - 0xc0742000 ( 544 kB) .data : 0xc04bb87b - 0xc06b9348 (2038 kB) .text : 0xc0100000 - 0xc04bb87b (3822 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2260.728 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.45 BogoMIPS (lpj=2260728) Security Framework initialized TOMOYO Linux initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 16652 entries in 33 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4521.76 BogoMIPS (lpj=2260883) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9043.22 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Time: 10:39:29 Date: 10/22/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 3d3a0c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) DMAR: Forcing write-buffer flush capability pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-0xf6afffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-0xf6afbfff] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-0xf69fffff] pci 0000:0c:00.0: supports D1 D2 pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff] pci 0000:09:00.0: reg 10 64bit mmio: [0xf68f0000-0xf68fffff] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.4: bridge 32bit mmio: [0xf6800000-0xf68fffff] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:01.1: reg 10 32bit mmio: [0xf67ff800-0xf67fffff] pci 0000:02:01.1: supports D1 D2 pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.1: PME# disabled pci 0000:02:01.2: reg 10 32bit mmio: [0xf67ff700-0xf67ff7ff] pci 0000:02:01.2: supports D1 D2 pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:01.2: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xf6700000-0xf67fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:05: ioport range 0xc80-0xcaf has been reserved system 00:05: ioport range 0xcc0-0xcff could not be reserved system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:0a: ioport range 0xcb0-0xcbb has been reserved system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved system 00:0b: ioport range 0x900-0x92f has been reserved system 00:0b: ioport range 0x931-0x933 has been reserved system 00:0b: ioport range 0x935-0x97f has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0x1000-0x1005 has been reserved system 00:0b: ioport range 0x1008-0x100f has been reserved system 00:0c: ioport range 0xf400-0xf4fe has been reserved system 00:0c: ioport range 0x1006-0x1007 has been reserved system 00:0c: ioport range 0x100a-0x1059 could not be reserved system 00:0c: ioport range 0x1060-0x107f has been reserved system 00:0c: ioport range 0x1080-0x10bf has been reserved system 00:0c: ioport range 0x1100-0x111f has been reserved system 00:0c: ioport range 0x1010-0x102f has been reserved system 00:0c: ioport range 0x809-0x809 has been reserved system 00:0d: iomem range 0x0-0x9efff could not be reserved system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff could not be reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x3d38d3ff could not be reserved system 00:0d: iomem range 0x3d38d400-0x3dafffff could not be reserved system 00:0d: iomem range 0x3db00000-0x3dbfffff has been reserved system 00:0d: iomem range 0xffe80000-0xffffffff has been reserved system 00:0d: iomem range 0xffa80000-0xffbfffff has been reserved system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0x44000000-0x441fffff pci 0000:00:1c.0: PREFETCH window: 0x00000044200000-0x000000443fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff pci 0000:00:1c.1: PREFETCH window: 0x00000044400000-0x000000445fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.4: IO window: 0x4000-0x4fff pci 0000:00:1c.4: MEM window: 0xf6800000-0xf68fffff pci 0000:00:1c.4: PREFETCH window: 0x00000044600000-0x000000447fffff pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:01.0: IO window: 0x005000-0x0050ff pci 0000:02:01.0: IO window: 0x005400-0x0054ff pci 0000:02:01.0: PREFETCH window: 0x40000000-0x43ffffff pci 0000:02:01.0: MEM window: 0x48000000-0x4bffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x5000-0x5fff pci 0000:00:1e.0: MEM window: 0xf6700000-0xf67fffff pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] pci_bus 0000:0b: resource 1 mem: [0x44000000-0x441fffff] pci_bus 0000:0b: resource 2 pref mem [0x44200000-0x443fffff] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff] pci_bus 0000:0c: resource 2 pref mem [0x44400000-0x445fffff] pci_bus 0000:09: resource 0 io: [0x4000-0x4fff] pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff] pci_bus 0000:09: resource 2 pref mem [0x44600000-0x447fffff] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff] pci_bus 0000:02: resource 1 mem: [0xf6700000-0xf67fffff] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0x5000-0x50ff] pci_bus 0000:03: resource 1 io: [0x5400-0x54ff] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6036k freed DMAR: Host address width 36 DMAR: DRHD base: 0x000000fed10000 flags: 0x0 IOMMU fed10000: ver 1:0 cap c9008020e30260 ecap 1000 DMAR: DRHD base: 0x000000fed11000 flags: 0x0 IOMMU fed11000: ver 1:0 cap c0000020630260 ecap 1000 DMAR: DRHD base: 0x000000fed13000 flags: 0x1 IOMMU fed13000: ver 1:0 cap c9008020630260 ecap 1000 DMAR: RMRR base: 0x0000003d7e7000 end: 0x0000003d7fffff DMAR: RMRR base: 0x0000003dc00000 end: 0x0000003fffffff DMAR: No ATSR found apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1256207969.584:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1736 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 vesafb: framebuffer at 0xe0000000, mapped to 0xf7c80000, using 1875k, total 32704k vesafb: mode is 800x600x16, linelength=1600, pages=33 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode PM: Checking image partition UUID=e6b5b283-70bd-46cd-9af2-80da3b6d5302 input: DualPoint Stick as /devices/platform/i8042/serio1/input/input1 input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2 PM: Resume from disk failed. registered taskstats version 1 Magic number: 13:868:679 rtc_cmos 00:03: setting system clock to 2009-10-22 10:39:31 UTC (1256207971) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 544k freed input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 ACPI: Sleep Button [SBTN] [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [drm] MTRR allocation failed. Graphics performance may suffer. pci 0000:00:02.0: irq 27 for MSI/MSI-X acpi device:36: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input7 ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 28 ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 28 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 28 ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 28 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: TOSHIBA MK8052GSX, LV011D, max UDMA/100 ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8052GS LV01 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-T20N, A106, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCCT20N A106 PQ: 0 ANSI: 5 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) PM: Marking nosave pages: 000000000009f000 - 0000000000100000 PM: Basic memory bitmaps created PM: Basic memory bitmaps freed EXT4-fs (sda1): mounted filesystem with ordered data mode Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. udev: starting version 146 ACPI: AC Adapter [AC] (off-line) ACPI: SSDT 3d390999 00281 (v01 PmRef BspIst 00003000 INTL 20050624) ACPI: SSDT 3d390df1 005C6 (v01 PmRef BspCst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet processor LNXCPU:00: registered as cooling_device1 ACPI: SSDT 3d390c1a 001D7 (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 3d3913b7 0008D (v01 PmRef ApCst 00003000 INTL 20050624) processor LNXCPU:01: registered as cooling_device2 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (53 C) ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132) ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132) ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132) ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132) ACPI: Battery Slot [BAT0] (battery present) ACPI: WMI: Mapper loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd usb usb2: SerialNumber: 0000:00:1a.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd usb usb3: SerialNumber: 0000:00:1a.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd usb usb4: SerialNumber: 0000:00:1d.0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd usb usb5: SerialNumber: 0000:00:1d.1 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv uhci_hcd usb usb6: SerialNumber: 0000:00:1d.2 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: EHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv ehci_hcd usb usb7: SerialNumber: 0000:00:1a.7 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: EHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32-0.rc5.1.1mdv ehci_hcd usb usb8: SerialNumber: 0000:00:1d.7 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 6 ports detected i8k: unable to get SMM BIOS version Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org) Non-volatile memory driver v1.3 EXT4-fs (sda6): mounted filesystem with ordered data mode Adding 4088500k swap on /dev/sda5. Priority:-1 extents:1 across:4088500k yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0263] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19 yenta_cardbus 0000:02:01.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean. yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf6700000 - 0xf67fffff yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. input: PC Speaker as /devices/platform/pcspkr/input/input8 b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 b43-pci-bridge 0000:0c:00.0: setting latency timer to 64 ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 tg3.c:v3.102 (September 1, 2009) tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:09:00.0: setting latency timer to 64 ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 eth0: Tigon3 [partno(BCM95756m) rev a200] (PCI Express) MAC address 00:21:9b:da:c8:ee eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4] sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 cfg80211: Calling CRDA to update world regulatory domain [drm:i915_driver_open], [drm:i915_driver_open], cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 b43-phy0: Broadcom 4312 WLAN found (core revision 15) b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2 phy0: Selected rate control algorithm 'minstrel' Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ] autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) hp_outs=1 (0xa/0x0/0x0/0x0/0x0) mono: mono_out=0x0 dig-out=0x1e/0x1f inputs: mic=0xb, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0 stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0) input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc00020727070] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x01af000e input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 NET: Registered protocol family 10 lo: Disabled Privacy Extensions tg3 0000:09:00.0: irq 29 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready fuse init (API version 7.13) ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (15425 buckets, 61700 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. ClusterIP Version 0.8 loaded successfully xt_time: kernel timezone is -0400