Attachment 27434 Details for Bug 22645 – dmesg output

dmesg output

dmest (text/plain), 65.47 KB, created by Mad on 2009-07-06 16:06:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mad

Created: 2009-07-06 16:06:50 UTC

Size: 65.47 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Linux version 2.6.30-gentoo-r2 (root@mad-lap) (gcc version 4.4.0 (Gentoo 4.4.0 p1.1) ) #5 SMP Tue Jul 7 01:21:00 CEST 2009
>[    0.000000] Command line: root=/dev/sda5 video=intelfb mode=1280x800-24@60
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable)
>[    0.000000]  BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved)
>[    0.000000]  BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
>[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>[    0.000000]  BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
>[    0.000000] DMI 2.4 present.
>[    0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x100000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 080000000 mask FC0000000 write-back
>[    0.000000]   2 base 100000000 mask FC0000000 write-back
>[    0.000000]   3 base 13C000000 mask FFC000000 uncachable
>[    0.000000]   4 base 0BF800000 mask FFF800000 uncachable
>[    0.000000]   5 base 0FEDA0000 mask FFFFE0000 uncachable
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
>[    0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x100000000
>[    0.000000] init_memory_mapping: 0000000000000000-00000000bf7b0000
>[    0.000000]  0000000000 - 00bf600000 page 2M
>[    0.000000]  00bf600000 - 00bf7b0000 page 4k
>[    0.000000] kernel direct mapping tables up to bf7b0000 @ 8000-d000
>[    0.000000] init_memory_mapping: 0000000100000000-000000013c000000
>[    0.000000]  0100000000 - 013c000000 page 2M
>[    0.000000] kernel direct mapping tables up to 13c000000 @ b000-11000
>[    0.000000] ACPI: RSDP 00000000000f7ac0 00024 (v02 HP    )
>[    0.000000] ACPI: XSDT 00000000bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>[    0.000000] ACPI: FACP 00000000bf7c8084 000F4 (v04 HP     30BE     00000003 HP   00000001)
>[    0.000000] ACPI: DSDT 00000000bf7c8544 1334B (v01 HP       nc65xx 00010000 MSFT 03000001)
>[    0.000000] ACPI: FACS 00000000bf7e7d80 00040
>[    0.000000] ACPI: SLIC 00000000bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>[    0.000000] ACPI: HPET 00000000bf7c83c8 00038 (v01 HP     30BE     00000001 HP   00000001)
>[    0.000000] ACPI: APIC 00000000bf7c8400 00068 (v01 HP     30BE     00000001 HP   00000001)
>[    0.000000] ACPI: MCFG 00000000bf7c8468 0003C (v01 HP     30BE     00000001 HP   00000001)
>[    0.000000] ACPI: TCPA 00000000bf7c84a4 00032 (v02 HP     30BE     00000001 HP   00000001)
>[    0.000000] ACPI: ASF! 00000000bf7c84d8 00069 (v16 HP     CHIMAYU  00000001 HP   00000000)
>[    0.000000] ACPI: SSDT 00000000bf7db88f 0032F (v01 HP       HPQSAT 00000001 MSFT 03000001)
>[    0.000000] ACPI: SSDT 00000000bf7dbbbe 0017C (v01 HP       HPQMRM 00000001 MSFT 03000001)
>[    0.000000] ACPI: SSDT 00000000bf7dc700 0025F (v01 HP      Cpu0Tst 00003000 INTL 20060317)
>[    0.000000] ACPI: SSDT 00000000bf7dc95f 000A6 (v01 HP      Cpu1Tst 00003000 INTL 20060317)
>[    0.000000] ACPI: SSDT 00000000bf7dca05 004D7 (v01 HP        CpuPm 00003000 INTL 20060317)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at 0000000000000000-000000013c000000
>[    0.000000] Bootmem setup node 0 0000000000000000-000000013c000000
>[    0.000000]   NODE_DATA [0000000000001000 - 0000000000004fff]
>[    0.000000]   bootmap [000000000000c000 -  00000000000337ff] pages 28
>[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 013c000000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>[    0.000000]   #2 [0001000000 - 000189a648]    TEXT DATA BSS ==> [0001000000 - 000189a648]
>[    0.000000]   #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>[    0.000000]   #4 [000189b000 - 000189b190]              BRK ==> [000189b000 - 000189b190]
>[    0.000000]   #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
>[    0.000000]   #6 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
>[    0.000000]  [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000000 -> 0x00001000
>[    0.000000]   DMA32    0x00001000 -> 0x00100000
>[    0.000000]   Normal   0x00100000 -> 0x0013c000
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[3] active PFN ranges
>[    0.000000]     0: 0x00000000 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x000bf7b0
>[    0.000000]     0: 0x00100000 -> 0x0013c000
>[    0.000000] On node 0 totalpages: 1029967
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 103 pages reserved
>[    0.000000]   DMA zone: 3840 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 14280 pages used for memmap
>[    0.000000]   DMA32 zone: 765928 pages, LIFO batch:31
>[    0.000000]   Normal zone: 3360 pages used for memmap
>[    0.000000]   Normal zone: 242400 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 24
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 00000000bf7b0000 - 00000000bf7c5000
>[    0.000000] PM: Registered nosave memory: 00000000bf7c5000 - 00000000bf7c6000
>[    0.000000] PM: Registered nosave memory: 00000000bf7c6000 - 00000000bf7e7000
>[    0.000000] PM: Registered nosave memory: 00000000bf7e7000 - 00000000bf7e8000
>[    0.000000] PM: Registered nosave memory: 00000000bf7e8000 - 00000000c0000000
>[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000
>[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000
>[    0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000
>[    0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000
>[    0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000
>[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
>[    0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000
>[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000
>[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
>[    0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
>[    0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 25 pages at ffff880028022000, static data 72736 bytes
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012168
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: root=/dev/sda5 video=intelfb mode=1280x800-24@60
>[    0.000000] Initializing CPU#0
>[    0.000000] NR_IRQS:320
>[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 1995.055 MHz processor.
>[    0.003333] Console: colour VGA+ 80x25
>[    0.003333] console [tty0] enabled
>[    0.003333] Checking aperture...
>[    0.003333] No AGP bridge found
>[    0.003333] Calgary: detecting Calgary via BIOS EBDA area
>[    0.003333] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.003333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.003333] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>[    0.003333] software IO TLB at phys 0x20000000 - 0x24000000
>[    0.003333] Memory: 3987180k/5177344k available (4725k kernel code, 1057476k absent, 132688k reserved, 2851k data, 480k init)
>[    0.003333] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.003333] hpet clockevent registered
>[    0.003333] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.36 BogoMIPS (lpj=6650183)
>[    0.003333] Security Framework initialized
>[    0.003333] SELinux:  Initializing.
>[    0.003333] SELinux:  Starting in permissive mode
>[    0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.003883] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.005324] Mount-cache hash table entries: 256
>[    0.005631] Initializing cgroup subsys ns
>[    0.005750] Initializing cgroup subsys cpuacct
>[    0.005875] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.006032] CPU: L2 cache: 4096K
>[    0.006144] CPU 0/0x0 -> Node 0
>[    0.006256] CPU: Physical Processor ID: 0
>[    0.006368] CPU: Processor Core ID: 0
>[    0.006485] CPU0: Thermal monitoring handled by SMI
>[    0.006489] using mwait in idle threads.
>[    0.006622] ACPI: Core revision 20090320
>[    0.030070] Setting APIC routing to flat
>[    0.033708] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.066934] CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>[    0.069999] Booting processor 1 APIC 0x1 ip 0x6000
>[    0.003333] Initializing CPU#1
>[    0.003333] Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649996)
>[    0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.003333] CPU: L2 cache: 4096K
>[    0.003333] CPU 1/0x1 -> Node 0
>[    0.003333] CPU: Physical Processor ID: 0
>[    0.003333] CPU: Processor Core ID: 1
>[    0.003333] CPU1: Thermal monitoring enabled (TM2)
>[    0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>[    0.161455] CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>[    0.162754] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>[    0.163358] Brought up 2 CPUs
>[    0.163471] Total of 2 processors activated (7983.61 BogoMIPS).
>[    0.166732] khelper used greatest stack depth: 5792 bytes left
>[    0.166860] net_namespace: 1424 bytes
>[    0.166860] NET: Registered protocol family 16
>[    0.166860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.166860] ACPI: bus type pci registered
>[    0.166976] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>[    0.166976] PCI: Not using MMCONFIG.
>[    0.166976] PCI: Using configuration type 1 for base access
>[    0.173370] bio: create slab <bio-0> at 0
>[    0.177595] ACPI: EC: Look up EC in DSDT
>[    0.213351] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[    0.246834] ACPI: Interpreter enabled
>[    0.246949] ACPI: (supports S0 S3 S4 S5)
>[    0.247250] ACPI: Using IOAPIC for interrupt routing
>[    0.247434] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>[    0.255382] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
>[    0.258423] PCI: Using MMCONFIG at f8000000 - fbffffff
>[    0.276849] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>[    0.276849] ACPI: EC: driver started in interrupt mode
>[    0.276995] ACPI: Power Resource [C27A] (on)
>[    0.277248] ACPI: Power Resource [C281] (on)
>[    0.277419] ACPI: Power Resource [C29D] (on)
>[    0.277594] ACPI: Power Resource [C1C5] (off)
>[    0.277594] ACPI: Power Resource [C3B9] (off)
>[    0.277594] ACPI: Power Resource [C3BA] (off)
>[    0.277594] ACPI: Power Resource [C3BB] (off)
>[    0.277594] ACPI: Power Resource [C3BC] (off)
>[    0.277701] ACPI: Power Resource [C3BD] (off)
>[    0.280390] ACPI: No dock devices found.
>[    0.281383] ACPI: PCI Root Bridge [C003] (0000:00)
>[    0.281543] pci 0000:00:02.0: reg 10 64bit mmio: [0xe4400000-0xe44fffff]
>[    0.281543] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
>[    0.281543] pci 0000:00:02.0: reg 20 io port: [0x4000-0x4007]
>[    0.281543] pci 0000:00:02.1: reg 10 64bit mmio: [0xe4500000-0xe45fffff]
>[    0.281543] pci 0000:00:03.0: reg 10 64bit mmio: [0xe4600000-0xe460000f]
>[    0.281543] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>[    0.281543] pci 0000:00:03.0: PME# disabled
>[    0.281543] pci 0000:00:03.2: reg 10 io port: [0x4008-0x400f]
>[    0.281543] pci 0000:00:03.2: reg 14 io port: [0x4010-0x4013]
>[    0.281543] pci 0000:00:03.2: reg 18 io port: [0x4018-0x401f]
>[    0.281543] pci 0000:00:03.2: reg 1c io port: [0x4020-0x4023]
>[    0.281543] pci 0000:00:03.2: reg 20 io port: [0x4030-0x403f]
>[    0.281543] pci 0000:00:03.3: reg 10 io port: [0x4040-0x4047]
>[    0.281543] pci 0000:00:03.3: reg 14 32bit mmio: [0xe4601000-0xe4601fff]
>[    0.281543] pci 0000:00:19.0: reg 10 32bit mmio: [0xe4620000-0xe463ffff]
>[    0.281543] pci 0000:00:19.0: reg 14 32bit mmio: [0xe4640000-0xe4640fff]
>[    0.281543] pci 0000:00:19.0: reg 18 io port: [0x4060-0x407f]
>[    0.281543] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.281543] pci 0000:00:19.0: PME# disabled
>[    0.281543] pci 0000:00:1a.0: reg 20 io port: [0x4080-0x409f]
>[    0.281543] pci 0000:00:1a.1: reg 20 io port: [0x40a0-0x40bf]
>[    0.281543] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4641000-0xe46413ff]
>[    0.281543] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.281543] pci 0000:00:1a.7: PME# disabled
>[    0.281543] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4644000-0xe4647fff]
>[    0.281543] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.281543] pci 0000:00:1b.0: PME# disabled
>[    0.281543] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.281543] pci 0000:00:1c.0: PME# disabled
>[    0.281639] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.281758] pci 0000:00:1c.1: PME# disabled
>[    0.281964] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.282083] pci 0000:00:1c.4: PME# disabled
>[    0.282261] pci 0000:00:1d.0: reg 20 io port: [0x40c0-0x40df]
>[    0.282329] pci 0000:00:1d.1: reg 20 io port: [0x40e0-0x40ff]
>[    0.282399] pci 0000:00:1d.2: reg 20 io port: [0x4100-0x411f]
>[    0.282473] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4648000-0xe46483ff]
>[    0.282540] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.282659] pci 0000:00:1d.7: PME# disabled
>[    0.282947] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>[    0.283131] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
>[    0.283250] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
>[    0.283336] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f)
>[    0.283523] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
>[    0.283756] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>[    0.283764] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>[    0.283772] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>[    0.283781] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>[    0.283789] pci 0000:00:1f.1: reg 20 io port: [0x4120-0x412f]
>[    0.283866] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7]
>[    0.283874] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7]
>[    0.283882] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377]
>[    0.283890] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577]
>[    0.283898] pci 0000:00:1f.2: reg 20 io port: [0x4160-0x417f]
>[    0.283907] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4649000-0xe46497ff]
>[    0.283952] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.284069] pci 0000:00:1f.2: PME# disabled
>[    0.284396] pci 0000:10:00.0: reg 10 64bit mmio: [0xe4000000-0xe4001fff]
>[    0.284542] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
>[    0.284684] pci 0000:10:00.0: PME# disabled
>[    0.284904] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff]
>[    0.284975] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff]
>[    0.284981] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
>[    0.285053] pci 0000:02:06.0: reg 10 32bit mmio: [0xe4100000-0xe4100fff]
>[    0.285082] pci 0000:02:06.0: supports D1 D2
>[    0.285085] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.285205] pci 0000:02:06.0: PME# disabled
>[    0.285369] pci 0000:02:06.1: reg 10 32bit mmio: [0xe4101000-0xe4101fff]
>[    0.285399] pci 0000:02:06.1: supports D1 D2
>[    0.285401] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.285522] pci 0000:02:06.1: PME# disabled
>[    0.285687] pci 0000:02:06.2: reg 10 32bit mmio: [0xe4102000-0xe41027ff]
>[    0.285763] pci 0000:02:06.2: supports D1 D2
>[    0.285765] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.285885] pci 0000:02:06.2: PME# disabled
>[    0.286050] pci 0000:02:06.3: reg 10 32bit mmio: [0xe4103000-0xe41030ff]
>[    0.286127] pci 0000:02:06.3: supports D1 D2
>[    0.286129] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.286250] pci 0000:02:06.3: PME# disabled
>[    0.286415] pci 0000:02:06.4: reg 10 32bit mmio: [0xe4104000-0xe41040ff]
>[    0.286491] pci 0000:02:06.4: supports D1 D2
>[    0.286493] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.286671] pci 0000:02:06.4: PME# disabled
>[    0.286853] pci 0000:00:1e.0: transparent bridge
>[    0.286973] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4100000-0xe43fffff]
>[    0.287060] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
>[    0.287377] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
>[    0.287517] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
>[    0.287612] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
>[    0.287709] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
>[    0.353597] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
>[    0.354153] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
>[    0.354707] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
>[    0.355260] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5
>[    0.355856] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
>[    0.356812] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5
>[    0.357407] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
>[    0.357816] ACPI Exception (pci_link-0182): AE_NOT_FOUND, Evaluating _PRS [20090320]
>[    0.360094] SCSI subsystem initialized
>[    0.360122] libata version 3.00 loaded.
>[    0.360122] usbcore: registered new interface driver usbfs
>[    0.360145] usbcore: registered new interface driver hub
>[    0.360145] usbcore: registered new device driver usb
>[    0.360145] ACPI: WMI: Mapper loaded
>[    0.360145] PCI: Using ACPI for IRQ routing
>[    0.423363] cfg80211: Calling CRDA to update world regulatory domain
>[    0.423474] NetLabel: Initializing
>[    0.423474] NetLabel:  domain hash size = 128
>[    0.423563] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.423689] NetLabel:  unlabeled traffic allowed by default
>[    0.426701] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.426990] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.449605] pnp: PnP ACPI init
>[    0.449724] ACPI: bus type pnp registered
>[    0.463915] pnp: PnP ACPI: found 16 devices
>[    0.464029] ACPI: ACPI bus type pnp unregistered
>[    0.464150] system 00:00: iomem range 0x0-0x9ffff could not be reserved
>[    0.464267] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>[    0.464385] system 00:00: iomem range 0x100000-0xbf7fffff could not be reserved
>[    0.464574] system 00:0c: ioport range 0x500-0x55f has been reserved
>[    0.464690] system 00:0c: ioport range 0x800-0x80f has been reserved
>[    0.464808] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
>[    0.464926] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
>[    0.465048] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
>[    0.465165] system 00:0e: ioport range 0x1000-0x107f has been reserved
>[    0.465282] system 00:0e: ioport range 0x1100-0x113f has been reserved
>[    0.465399] system 00:0e: ioport range 0x1200-0x121f has been reserved
>[    0.465517] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved
>[    0.465635] system 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved
>[    0.465753] system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved
>[    0.465871] system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved
>[    0.465990] system 00:0e: iomem range 0xfed90000-0xfed99fff has been reserved
>[    0.466111] system 00:0f: iomem range 0xcee00-0xcffff has been reserved
>[    0.466229] system 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved
>[    0.466350] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
>[    0.471141] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
>[    0.471257] pci 0000:00:1c.0:   IO window: disabled
>[    0.471375] pci 0000:00:1c.0:   MEM window: disabled
>[    0.471493] pci 0000:00:1c.0:   PREFETCH window: disabled
>[    0.471614] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
>[    0.471730] pci 0000:00:1c.1:   IO window: disabled
>[    0.471849] pci 0000:00:1c.1:   MEM window: 0xe4000000-0xe40fffff
>[    0.471967] pci 0000:00:1c.1:   PREFETCH window: disabled
>[    0.472088] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
>[    0.472206] pci 0000:00:1c.4:   IO window: 0x2000-0x3fff
>[    0.472325] pci 0000:00:1c.4:   MEM window: 0xe0000000-0xe3ffffff
>[    0.472444] pci 0000:00:1c.4:   PREFETCH window: disabled
>[    0.472569] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
>[    0.472685] pci 0000:02:06.0:   IO window: 0x005000-0x0050ff
>[    0.472804] pci 0000:02:06.0:   IO window: 0x005400-0x0054ff
>[    0.472924] pci 0000:02:06.0:   PREFETCH window: 0xc4000000-0xc7ffffff
>[    0.473048] pci 0000:02:06.0:   MEM window: 0xcc000000-0xcfffffff
>[    0.473168] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04
>[    0.473284] pci 0000:02:06.1:   IO window: 0x005800-0x0058ff
>[    0.473403] pci 0000:02:06.1:   IO window: 0x005c00-0x005cff
>[    0.473523] pci 0000:02:06.1:   PREFETCH window: 0xc8000000-0xcbffffff
>[    0.473643] pci 0000:02:06.1:   MEM window: 0xe8000000-0xebffffff
>[    0.473762] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>[    0.473880] pci 0000:00:1e.0:   IO window: 0x5000-0x5fff
>[    0.473999] pci 0000:00:1e.0:   MEM window: 0xe4100000-0xe43fffff
>[    0.474118] pci 0000:00:1e.0:   PREFETCH window: 0x000000c4000000-0x000000cbffffff
>[    0.474316] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.474436] pci 0000:00:1c.0: setting latency timer to 64
>[    0.474446] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    0.474566] pci 0000:00:1c.1: setting latency timer to 64
>[    0.474576] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.474695] pci 0000:00:1c.4: setting latency timer to 64
>[    0.474703] pci 0000:00:1e.0: setting latency timer to 64
>[    0.474715] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    0.474844] pci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    0.474966] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>[    0.474969] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>[    0.474972] pci_bus 0000:10: resource 1 mem: [0xe4000000-0xe40fffff]
>[    0.474974] pci_bus 0000:28: resource 0 io:  [0x2000-0x3fff]
>[    0.474977] pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff]
>[    0.474979] pci_bus 0000:02: resource 0 io:  [0x5000-0x5fff]
>[    0.474982] pci_bus 0000:02: resource 1 mem: [0xe4100000-0xe43fffff]
>[    0.474984] pci_bus 0000:02: resource 2 pref mem [0xc4000000-0xcbffffff]
>[    0.474987] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>[    0.474989] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
>[    0.474991] pci_bus 0000:03: resource 0 io:  [0x5000-0x50ff]
>[    0.474994] pci_bus 0000:03: resource 1 io:  [0x5400-0x54ff]
>[    0.474996] pci_bus 0000:03: resource 2 pref mem [0xc4000000-0xc7ffffff]
>[    0.474999] pci_bus 0000:03: resource 3 mem: [0xcc000000-0xcfffffff]
>[    0.475001] pci_bus 0000:04: resource 0 io:  [0x5800-0x58ff]
>[    0.475003] pci_bus 0000:04: resource 1 io:  [0x5c00-0x5cff]
>[    0.475006] pci_bus 0000:04: resource 2 pref mem [0xc8000000-0xcbffffff]
>[    0.475008] pci_bus 0000:04: resource 3 mem: [0xe8000000-0xebffffff]
>[    0.475038] NET: Registered protocol family 2
>[    0.502936] Switched to high resolution mode on CPU 1
>[    0.503332] Switched to high resolution mode on CPU 0
>[    0.510997] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.512476] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>[    0.517373] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.518175] TCP: Hash tables configured (established 524288 bind 65536)
>[    0.518292] TCP reno registered
>[    0.527619] NET: Registered protocol family 1
>[    0.528992] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    0.529240] Intel AES-NI instructions are not detected.
>[    0.529602] audit: initializing netlink socket (disabled)
>[    0.529727] type=2000 audit(1246925290.527:1): initialized
>[    0.540177] VFS: Disk quotas dquot_6.5.2
>[    0.540370] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.541528] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.542135] fuse init (API version 7.11)
>[    0.542408] msgmni has been set to 7787
>[    0.543412] alg: No test for stdrng (krng)
>[    0.543538] io scheduler noop registered
>[    0.543651] io scheduler deadline registered
>[    0.543834] io scheduler cfq registered (default)
>[    0.543959] pci 0000:00:02.0: Boot video device
>[    0.543974] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00
>[    0.543977] pci 0000:00:1a.0: Performing full reset
>[    0.543996] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
>[    0.543998] pci 0000:00:1a.1: Performing full reset
>[    0.544058] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
>[    0.544060] pci 0000:00:1d.0: Performing full reset
>[    0.544079] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
>[    0.544081] pci 0000:00:1d.1: Performing full reset
>[    0.544100] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
>[    0.544102] pci 0000:00:1d.2: Performing full reset
>[    0.544375] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>[    0.544395] pcieport-driver 0000:00:1c.0: setting latency timer to 64
>[    0.544645] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
>[    0.544664] pcieport-driver 0000:00:1c.1: setting latency timer to 64
>[    0.544910] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
>[    0.544929] pcieport-driver 0000:00:1c.4: setting latency timer to 64
>[    0.548582] Linux agpgart interface v0.103
>[    0.552853] ACPI: AC Adapter [C239] (on-line)
>[    0.553095] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>[    0.553279] ACPI: Power Button [PWRF]
>[    0.553494] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>[    0.553678] ACPI: Sleep Button [C2BB]
>[    0.553866] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
>[    0.554128] ACPI: Lid Switch [C153]
>[    0.554602] fan PNP0C0B:00: registered as cooling_device0
>[    0.554720] ACPI: Fan [C3BE] (off)
>[    0.555114] fan PNP0C0B:01: registered as cooling_device1
>[    0.555231] ACPI: Fan [C3BF] (off)
>[    0.555626] fan PNP0C0B:02: registered as cooling_device2
>[    0.555743] ACPI: Fan [C3C0] (off)
>[    0.557935] fan PNP0C0B:03: registered as cooling_device3
>[    0.558051] ACPI: Fan [C3C1] (off)
>[    0.558443] fan PNP0C0B:04: registered as cooling_device4
>[    0.558559] ACPI: Fan [C3C2] (off)
>[    0.559142] ACPI: SSDT 00000000bf7dbe02 0027F (v01 HP      Cpu0Ist 00003000 INTL 20060317)
>[    0.559949] ACPI: SSDT 00000000bf7dc106 005FA (v01 HP      Cpu0Cst 00003001 INTL 20060317)
>[    0.563064] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
>[    0.563690] Monitor-Mwait will be used to enter C-1 state
>[    0.563711] Monitor-Mwait will be used to enter C-2 state
>[    0.563720] Marking TSC unstable due to TSC halts in idle
>[    0.563880] ACPI: CPU0 (power states: C1[C1] C2[C2])
>[    0.564166] processor ACPI_CPU:00: registered as cooling_device5
>[    0.564284] ACPI: Processor [CPU0] (supports 8 throttling states)
>[    0.564861] ACPI: SSDT 00000000bf7dbd3a 000C8 (v01 HP      Cpu1Ist 00003000 INTL 20060317)
>[    0.565530] ACPI: SSDT 00000000bf7dc081 00085 (v01 HP      Cpu1Cst 00003000 INTL 20060317)
>[    0.566511] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
>[    0.567258] ACPI: CPU1 (power states: C1[C1] C2[C2])
>[    0.567559] processor ACPI_CPU:01: registered as cooling_device6
>[    0.567677] ACPI: Processor [CPU1] (supports 8 throttling states)
>[    0.578799] thermal LNXTHERM:01: registered as thermal_zone0
>[    0.578921] ACPI: Thermal Zone [TZ3] (34 C)
>[    0.587989] thermal LNXTHERM:02: registered as thermal_zone1
>[    0.588110] ACPI: Thermal Zone [TZ4] (30 C)
>[    0.591669] thermal LNXTHERM:03: registered as thermal_zone2
>[    0.591790] ACPI: Thermal Zone [TZ5] (50 C)
>[    0.608873] thermal LNXTHERM:04: registered as thermal_zone3
>[    0.608995] ACPI: Thermal Zone [TZ0] (50 C)
>[    0.613454] thermal LNXTHERM:05: registered as thermal_zone4
>[    0.613575] ACPI: Thermal Zone [TZ1] (54 C)
>[    0.614536] [drm] Initialized drm 1.1.0 20060810
>[    0.614703] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.656300] ACPI: Battery Slot [C23B] (battery present)
>[    0.699383] ACPI: Battery Slot [C23A] (battery present)
>[    0.953506] serial8250: ttyS2 at I/O 0x3e8 (irq = 6) is a 16550A
>[    0.954066] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    0.954276] 0000:00:03.3: ttyS0 at I/O 0x4040 (irq = 17) is a 16550A
>[    0.954778] brd: module loaded
>[    0.955817] loop: module loaded
>[    0.956019] Loading iSCSI transport class v2.0-870.
>[    0.956439] Driver 'sd' needs updating - please use bus_type methods
>[    0.956603] Driver 'sr' needs updating - please use bus_type methods
>[    0.956854] ahci 0000:00:1f.2: version 3.0
>[    0.956868] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[    0.957037] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
>[    0.957068] ahci: SSS flag set, parallel bus scan disabled
>[    0.957205] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
>[    0.957390] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
>[    0.957582] ahci 0000:00:1f.2: setting latency timer to 64
>[    0.957679] scsi0 : ahci
>[    0.957947] scsi1 : ahci
>[    0.958184] scsi2 : ahci
>[    0.958429] ata1: SATA max UDMA/133 abar m2048@0xe4649000 port 0xe4649100 irq 27
>[    0.958611] ata2: DUMMY
>[    0.958722] ata3: DUMMY
>[    0.958957] ata_piix 0000:00:1f.1: version 2.13
>[    0.958966] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.959111] ata_piix 0000:00:1f.1: setting latency timer to 64
>[    0.959184] scsi3 : ata_piix
>[    0.959418] scsi4 : ata_piix
>[    0.960368] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4120 irq 14
>[    0.960486] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4128 irq 15
>[    0.960615] work_for_cpu used greatest stack depth: 5152 bytes left
>[    0.960985] console [netcon0] enabled
>[    0.961097] netconsole: network logging started
>[    0.961301] firewire_ohci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
>[    1.033349] firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10
>[    1.033694] usbmon: debugfs is not available
>[    1.033808] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.033926] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>[    1.033970] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.034097] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[    1.034101] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    1.034290] drivers/usb/core/inode.c: creating file 'devices'
>[    1.034295] drivers/usb/core/inode.c: creating file '001'
>[    1.034299] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    1.034488] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
>[    1.034493] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
>[    1.034515] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.038402] ehci_hcd 0000:00:1a.7: debug port 1
>[    1.038521] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>[    1.038523] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
>[    1.038535] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4641000
>[    1.038653] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.042541] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>[    1.050014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    1.050145] usb usb1: default language 0x0409
>[    1.050152] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.050269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.050451] usb usb1: Product: EHCI Host Controller
>[    1.050565] usb usb1: Manufacturer: Linux 2.6.30-gentoo-r2 ehci_hcd
>[    1.050681] usb usb1: SerialNumber: 0000:00:1a.7
>[    1.050832] usb usb1: uevent
>[    1.050877] usb usb1: usb_probe_device
>[    1.050880] usb usb1: configuration #1 chosen from 1 choice
>[    1.051000] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>[    1.051017] usb 1-0:1.0: uevent
>[    1.051058] hub 1-0:1.0: usb_probe_interface
>[    1.051060] hub 1-0:1.0: usb_probe_interface - got id
>[    1.051063] hub 1-0:1.0: USB hub found
>[    1.051182] hub 1-0:1.0: 4 ports detected
>[    1.051295] hub 1-0:1.0: standalone hub
>[    1.051296] hub 1-0:1.0: no power switching (usb 1.0)
>[    1.051298] hub 1-0:1.0: individual port over-current protection
>[    1.051300] hub 1-0:1.0: power on to power good time: 20ms
>[    1.051304] hub 1-0:1.0: local power source is good
>[    1.051306] hub 1-0:1.0: trying to enable port power on non-switchable hub
>[    1.051421] drivers/usb/core/inode.c: creating file '001'
>[    1.051524] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[    1.051651] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    1.051654] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    1.051820] drivers/usb/core/inode.c: creating file '002'
>[    1.051825] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    1.052012] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
>[    1.052017] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
>[    1.052038] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.055918] ehci_hcd 0000:00:1d.7: debug port 1
>[    1.056037] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>[    1.056039] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>[    1.056045] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4648000
>[    1.056163] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    1.060060] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>[    1.070014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.070138] usb usb2: default language 0x0409
>[    1.070145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.070261] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.070442] usb usb2: Product: EHCI Host Controller
>[    1.070557] usb usb2: Manufacturer: Linux 2.6.30-gentoo-r2 ehci_hcd
>[    1.070672] usb usb2: SerialNumber: 0000:00:1d.7
>[    1.070817] usb usb2: uevent
>[    1.070867] usb usb2: usb_probe_device
>[    1.070869] usb usb2: configuration #1 chosen from 1 choice
>[    1.070989] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>[    1.071006] usb 2-0:1.0: uevent
>[    1.071047] hub 2-0:1.0: usb_probe_interface
>[    1.071049] hub 2-0:1.0: usb_probe_interface - got id
>[    1.071051] hub 2-0:1.0: USB hub found
>[    1.071169] hub 2-0:1.0: 6 ports detected
>[    1.071282] hub 2-0:1.0: standalone hub
>[    1.071283] hub 2-0:1.0: no power switching (usb 1.0)
>[    1.071285] hub 2-0:1.0: individual port over-current protection
>[    1.071287] hub 2-0:1.0: power on to power good time: 20ms
>[    1.071291] hub 2-0:1.0: local power source is good
>[    1.071293] hub 2-0:1.0: trying to enable port power on non-switchable hub
>[    1.071372] drivers/usb/core/inode.c: creating file '001'
>[    1.071530] usbcore: registered new interface driver usblp
>[    1.071687] usbcore: registered new interface driver cdc_wdm
>[    1.071804] Initializing USB Mass Storage driver...
>[    1.071969] usbcore: registered new interface driver usb-storage
>[    1.072086] USB Mass Storage support registered.
>[    1.072249] usbcore: registered new interface driver libusual
>[    1.072476] PNP: PS/2 Controller [PNP0303:C29A,PNP0f13:C29B] at 0x60,0x64 irq 1,12
>[    1.074535] i8042.c: Detected active multiplexing controller, rev 1.1.
>[    1.075414] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.075533] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.075649] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.075765] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.075882] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.076050] mice: PS/2 mouse device common for all mice
>[    1.076500] rtc_cmos 00:08: RTC can wake from S4
>[    1.076677] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>[    1.076824] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.077025] Linux video capture interface: v2.00
>[    1.077448] lis3lv02d: laptop model unknown, using default axes configuration
>[    1.078324] lis3lv02d: 2-byte sensor found
>[    1.090697] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input3
>[    1.090982] lis3_init_device: irq 23
>[    1.091094] lis3: registering device
>[    1.091298] Registered led device: hp::hddprotect
>[    1.091452] lis3lv02d driver loaded.
>[    1.091725] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>[    1.092259] cpuidle: using governor ladder
>[    1.092792] cpuidle: using governor menu
>[    1.092950] sdhci: Secure Digital Host Controller Interface driver
>[    1.093069] sdhci: Copyright(c) Pierre Ossman
>[    1.093264] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20)
>[    1.093484] sdhci-pci 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    1.095785] Registered led device: mmc0::
>[    1.097003] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
>[    1.097183] ricoh-mmc: Ricoh MMC Controller disabling driver
>[    1.097298] ricoh-mmc: Copyright(c) Philip Langdale
>[    1.097466] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10)
>[    1.097690] ricoh-mmc: Controller is now disabled.
>[    1.097866] No iBFT detected.
>[    1.098853] usbcore: registered new interface driver hiddev
>[    1.099003] usbcore: registered new interface driver usbhid
>[    1.099117] usbhid: v2.6:USB HID core driver
>[    1.101261] input: HP WMI hotkeys as /devices/virtual/input/input4
>[    1.113380] Advanced Linux Sound Architecture Driver Version 1.0.20.
>[    1.121267] ata4.00: ATAPI: Optiarc  DVD RW AD-7913A, 1.00, max UDMA/33
>[    1.137813] ata4.00: configured for UDMA/33
>[    1.144802] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>[    1.144931] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    1.145134] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[    1.150220] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
>[    1.150224] hub 1-0:1.0: port 1: status 0501 change 0001
>[    1.170095] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>[    1.226055] work_for_cpu used greatest stack depth: 4952 bytes left
>[    1.226129] ALSA device list:
>[    1.226131]   #0: HDA Intel at 0xe4644000 irq 17
>[    1.226455] IPv4 over IPv4 tunneling driver
>[    1.226905] TCP cubic registered
>[    1.227017] Initializing XFRM netlink socket
>[    1.227394] NET: Registered protocol family 10
>[    1.228333] IPv6 over IPv4 tunneling driver
>[    1.228939] NET: Registered protocol family 17
>[    1.229225] RPC: Registered udp transport module.
>[    1.229340] RPC: Registered tcp transport module.
>[    1.230408] PM: Resume from disk failed.
>[    1.250059] hub 1-0:1.0: state 7 ports 4 chg 0002 evt 0000
>[    1.250067] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>[    1.276740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.280356] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>[    1.280473] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
>[    1.281723] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
>[    1.281731] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[    1.284014] ata1.00: ATA-7: ST9120822AS, 3.BHD, max UDMA/100
>[    1.284163] ata1.00: 234441648 sectors, multi 16: LBA48 
>[    1.292536] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>[    1.292687] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
>[    1.294674] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
>[    1.294682] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>[    1.297040] ata1.00: configured for UDMA/100
>[    1.303570] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
>[    1.303581] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
>[    1.303590] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
>[    1.315566] ata1.00: configured for UDMA/100
>[    1.315713] ata1: EH complete
>[    1.316056] scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.BH PQ: 0 ANSI: 5
>[    1.317091] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>[    1.317354] sd 0:0:0:0: [sda] Write Protect is off
>[    1.317500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.317586] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.318035]  sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.325174] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7913A  1.00 PQ: 0 ANSI: 5
>[    1.356732] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
>[    1.356768] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
>[    1.358989] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.359220] Uniform CD-ROM driver Revision: 3.20
>[    1.359826] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[    1.360196] sr 3:0:0:0: Attached scsi generic sg1 type 5
>[    1.360436] ata5: port disabled. ignoring.
>[    1.379816]  sda1 sda2 sda3 < sda5 >
>[    1.392595] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.500073] Clocksource tsc unstable (delta = -304834768 ns)
>[    1.533707] firewire_core: created device fw0: GUID 00023f9929c12c0e, S400
>[    1.721192] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
>[    1.721426] serio: Synaptics pass-through port at isa0060/serio4/input0
>[    1.762466] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
>[    1.787259] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
>[    1.799932] EXT3-fs: sda5: couldn't mount because of unsupported optional features (240).
>[    1.801781] EXT2-fs: sda5: couldn't mount because of unsupported optional features (240).
>[    1.879272] EXT4-fs: barriers enabled
>[    1.896061] kjournald2 starting: pid 877, dev sda5:8, commit interval 5 seconds
>[    1.896126] EXT4-fs: delayed allocation enabled
>[    1.896130] EXT4-fs: file extents enabled
>[    1.896930] EXT4-fs: mballoc enabled
>[    1.897094] EXT4-fs: mounted filesystem sda5 with ordered data mode
>[    1.897258] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
>[    1.897455] Freeing unused kernel memory: 480k freed
>[    1.897947] Write protecting the kernel read-only data: 6832k
>[    3.136018] init-early.sh used greatest stack depth: 4880 bytes left
>[    3.346735] hub 2-0:1.0: hub_suspend
>[    3.346750] usb usb2: bus auto-suspend
>[    3.346756] ehci_hcd 0000:00:1d.7: suspend root hub
>[    4.096544] runscript.sh used greatest stack depth: 4696 bytes left
>[    4.350051] hub 1-0:1.0: hub_suspend
>[    4.350066] usb usb1: bus auto-suspend
>[    4.350072] ehci_hcd 0000:00:1a.7: suspend root hub
>[    5.008483] udev: starting version 141
>[    5.065234] usb usb1: uevent
>[    5.065282] usb 1-0:1.0: uevent
>[    5.066445] usb usb2: uevent
>[    5.066494] usb 2-0:1.0: uevent
>[    5.329304] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
>[    5.329307] e1000e: Copyright (c) 1999-2008 Intel Corporation.
>[    5.329412] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[    5.329426] e1000e 0000:00:19.0: setting latency timer to 64
>[    5.329578] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
>[    5.407657] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
>[    5.407660] intelfb: Version 0.9.6
>[    5.444595] uhci_hcd: USB Universal Host Controller Interface driver
>[    5.461888] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30be]
>[    5.477306] parport_pc 00:03: reported by Plug and Play ACPI
>[    5.477347] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
>[    5.528775] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
>[    5.528777] iwlagn: Copyright(c) 2003-2009 Intel Corporation
>[    5.529626] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    5.529660] iwlagn 0000:10:00.0: setting latency timer to 64
>[    5.529808] iwlagn 0000:10:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
>[    5.535729] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:d4:ef:9a:ac
>[    5.535732] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>[    5.535763] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
>[    5.538120] NET: Registered protocol family 23
>[    5.538552] intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    5.538561] intelfb: 00:02.0: Intel(R) 965GM, aperture size 256MB, stolen memory 7932kB
>[    5.538564] intelfb: cannot acquire agp
>[    5.538786] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>[    5.539887] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>[    5.543642] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[    5.580038] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    5.580052] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    5.580058] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    5.580109] drivers/usb/core/inode.c: creating file '003'
>[    5.580119] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    5.580130] uhci_hcd 0000:00:1a.0: detected 2 ports
>[    5.580138] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.580141] uhci_hcd 0000:00:1a.0: Performing full reset
>[    5.580159] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
>[    5.580183] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004080
>[    5.580234] usb usb3: default language 0x0409
>[    5.580246] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.580250] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.580254] usb usb3: Product: UHCI Host Controller
>[    5.580258] usb usb3: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd
>[    5.580261] usb usb3: SerialNumber: 0000:00:1a.0
>[    5.580333] usb usb3: uevent
>[    5.580352] usb usb3: usb_probe_device
>[    5.580356] usb usb3: configuration #1 chosen from 1 choice
>[    5.580367] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>[    5.580392] usb 3-0:1.0: uevent
>[    5.580410] hub 3-0:1.0: usb_probe_interface
>[    5.580413] hub 3-0:1.0: usb_probe_interface - got id
>[    5.580417] hub 3-0:1.0: USB hub found
>[    5.580427] hub 3-0:1.0: 2 ports detected
>[    5.580430] hub 3-0:1.0: standalone hub
>[    5.580432] hub 3-0:1.0: no power switching (usb 1.0)
>[    5.580435] hub 3-0:1.0: individual port over-current protection
>[    5.580439] hub 3-0:1.0: power on to power good time: 2ms
>[    5.580446] hub 3-0:1.0: local power source is good
>[    5.580449] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[    5.580509] drivers/usb/core/inode.c: creating file '001'
>[    5.580664] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    5.580675] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[    5.580680] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    5.580719] drivers/usb/core/inode.c: creating file '004'
>[    5.580727] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    5.580737] uhci_hcd 0000:00:1a.1: detected 2 ports
>[    5.580744] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.580747] uhci_hcd 0000:00:1a.1: Performing full reset
>[    5.580765] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
>[    5.580774] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000040a0
>[    5.580818] usb usb4: default language 0x0409
>[    5.580829] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.580833] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.580841] usb usb4: Product: UHCI Host Controller
>[    5.580844] usb usb4: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd
>[    5.580848] usb usb4: SerialNumber: 0000:00:1a.1
>[    5.580909] usb usb4: uevent
>[    5.580924] usb usb4: usb_probe_device
>[    5.580928] usb usb4: configuration #1 chosen from 1 choice
>[    5.580937] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>[    5.580961] usb 4-0:1.0: uevent
>[    5.580978] hub 4-0:1.0: usb_probe_interface
>[    5.580981] hub 4-0:1.0: usb_probe_interface - got id
>[    5.580984] hub 4-0:1.0: USB hub found
>[    5.580994] hub 4-0:1.0: 2 ports detected
>[    5.580997] hub 4-0:1.0: standalone hub
>[    5.581000] hub 4-0:1.0: no power switching (usb 1.0)
>[    5.581003] hub 4-0:1.0: individual port over-current protection
>[    5.581006] hub 4-0:1.0: power on to power good time: 2ms
>[    5.581013] hub 4-0:1.0: local power source is good
>[    5.581016] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[    5.581069] drivers/usb/core/inode.c: creating file '001'
>[    5.581219] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[    5.581229] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    5.581235] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    5.581270] drivers/usb/core/inode.c: creating file '005'
>[    5.581278] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>[    5.581288] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    5.581294] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.581298] uhci_hcd 0000:00:1d.0: Performing full reset
>[    5.581315] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>[    5.581324] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040c0
>[    5.581368] usb usb5: default language 0x0409
>[    5.581379] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.581384] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.581387] usb usb5: Product: UHCI Host Controller
>[    5.581391] usb usb5: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd
>[    5.581394] usb usb5: SerialNumber: 0000:00:1d.0
>[    5.581455] usb usb5: uevent
>[    5.581470] usb usb5: usb_probe_device
>[    5.581473] usb usb5: configuration #1 chosen from 1 choice
>[    5.581483] usb usb5: adding 5-0:1.0 (config #1, interface 0)
>[    5.581507] usb 5-0:1.0: uevent
>[    5.581524] hub 5-0:1.0: usb_probe_interface
>[    5.581527] hub 5-0:1.0: usb_probe_interface - got id
>[    5.581530] hub 5-0:1.0: USB hub found
>[    5.581540] hub 5-0:1.0: 2 ports detected
>[    5.581543] hub 5-0:1.0: standalone hub
>[    5.581545] hub 5-0:1.0: no power switching (usb 1.0)
>[    5.581548] hub 5-0:1.0: individual port over-current protection
>[    5.581552] hub 5-0:1.0: power on to power good time: 2ms
>[    5.581558] hub 5-0:1.0: local power source is good
>[    5.581562] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[    5.581614] drivers/usb/core/inode.c: creating file '001'
>[    5.581753] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>[    5.581763] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    5.581769] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    5.581804] drivers/usb/core/inode.c: creating file '006'
>[    5.581811] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>[    5.581821] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    5.581828] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.581832] uhci_hcd 0000:00:1d.1: Performing full reset
>[    5.581849] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>[    5.581868] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000040e0
>[    5.581919] usb usb6: default language 0x0409
>[    5.581930] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.581935] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.581938] usb usb6: Product: UHCI Host Controller
>[    5.581942] usb usb6: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd
>[    5.581945] usb usb6: SerialNumber: 0000:00:1d.1
>[    5.582013] usb usb6: uevent
>[    5.582031] usb usb6: usb_probe_device
>[    5.582035] usb usb6: configuration #1 chosen from 1 choice
>[    5.582044] usb usb6: adding 6-0:1.0 (config #1, interface 0)
>[    5.582068] usb 6-0:1.0: uevent
>[    5.582097] hub 6-0:1.0: usb_probe_interface
>[    5.582100] hub 6-0:1.0: usb_probe_interface - got id
>[    5.582103] hub 6-0:1.0: USB hub found
>[    5.582112] hub 6-0:1.0: 2 ports detected
>[    5.582115] hub 6-0:1.0: standalone hub
>[    5.582118] hub 6-0:1.0: no power switching (usb 1.0)
>[    5.582121] hub 6-0:1.0: individual port over-current protection
>[    5.582124] hub 6-0:1.0: power on to power good time: 2ms
>[    5.582131] hub 6-0:1.0: local power source is good
>[    5.582134] hub 6-0:1.0: trying to enable port power on non-switchable hub
>[    5.582187] drivers/usb/core/inode.c: creating file '001'
>[    5.582324] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    5.582335] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    5.582340] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    5.582374] drivers/usb/core/inode.c: creating file '007'
>[    5.582382] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>[    5.582392] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    5.582399] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.582402] uhci_hcd 0000:00:1d.2: Performing full reset
>[    5.582420] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>[    5.582429] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004100
>[    5.582472] usb usb7: default language 0x0409
>[    5.582483] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.582487] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.582491] usb usb7: Product: UHCI Host Controller
>[    5.582495] usb usb7: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd
>[    5.582498] usb usb7: SerialNumber: 0000:00:1d.2
>[    5.582559] usb usb7: uevent
>[    5.582574] usb usb7: usb_probe_device
>[    5.582577] usb usb7: configuration #1 chosen from 1 choice
>[    5.582586] usb usb7: adding 7-0:1.0 (config #1, interface 0)
>[    5.582611] usb 7-0:1.0: uevent
>[    5.582627] hub 7-0:1.0: usb_probe_interface
>[    5.582630] hub 7-0:1.0: usb_probe_interface - got id
>[    5.582633] hub 7-0:1.0: USB hub found
>[    5.582643] hub 7-0:1.0: 2 ports detected
>[    5.582645] hub 7-0:1.0: standalone hub
>[    5.582648] hub 7-0:1.0: no power switching (usb 1.0)
>[    5.582651] hub 7-0:1.0: individual port over-current protection
>[    5.582654] hub 7-0:1.0: power on to power good time: 2ms
>[    5.582661] hub 7-0:1.0: local power source is good
>[    5.582664] hub 7-0:1.0: trying to enable port power on non-switchable hub
>[    5.582720] drivers/usb/core/inode.c: creating file '001'
>[    5.587460] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c38, PCI irq 18
>[    5.587467] yenta_cardbus 0000:02:06.0: Socket status: 30000006
>[    5.587476] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>[    5.587482] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
>[    5.587487] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
>[    5.592436] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30be]
>[    5.593460] iwlagn 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
>[    5.593569] iwlagn 0000:10:00.0: irq 29 for MSI/MSI-X
>[    5.597980] phy0: Selected rate control algorithm 'iwl-agn-rs'
>[    5.658081] tpm_inf_pnp 00:04: Found C282 with ID IFX0102
>[    5.658147] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>[    5.680197] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
>[    5.680205] hub 3-0:1.0: port 1: status 0101 change 0001
>[    5.680282] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    5.680291] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    5.680297] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    5.680302] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    5.698773] i915 0000:00:02.0: setting latency timer to 64
>[    5.726851] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0000, PCI irq 19
>[    5.726860] yenta_cardbus 0000:02:06.1: Socket status: 30000810
>[    5.726869] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
>[    5.726888] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>[    5.726897] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
>[    5.726904] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
>[    5.747104] i915 0000:00:02.0: irq 30 for MSI/MSI-X
>[    5.781423] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
>[    5.781449] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
>[    5.940127] usb 3-1: new full speed USB device using uhci_hcd and address 2
>[    6.094336] usb 3-1: skipped 1 descriptor after interface
>[    6.097262] usb 3-1: default language 0x0409
>[    6.107249] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
>[    6.107252] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    6.107254] usb 3-1: Product: HP Integrated Module
>[    6.107257] usb 3-1: Manufacturer: Broadcom Corp
>[    6.107322] usb 3-1: uevent
>[    6.107342] usb 3-1: usb_probe_device
>[    6.107345] usb 3-1: configuration #1 chosen from 1 choice
>[    6.110256] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>[    6.110277] usb 3-1:1.0: uevent
>[    6.110389] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
>[    6.110405] usb 3-1:1.1: uevent
>[    6.110474] usb 3-1: adding 3-1:1.2 (config #1, interface 2)
>[    6.110490] usb 3-1:1.2: uevent
>[    6.110558] usb 3-1: adding 3-1:1.3 (config #1, interface 3)
>[    6.110574] usb 3-1:1.3: uevent
>[    6.110592] drivers/usb/core/inode.c: creating file '002'
>[    6.343300] Bluetooth: Core ver 2.15
>[    6.343539] NET: Registered protocol family 31
>[    6.343549] Bluetooth: HCI device and connection manager initialized
>[    6.343552] Bluetooth: HCI socket layer initialized
>[    6.375481] Bluetooth: Generic Bluetooth USB driver ver 0.5
>[    6.375505] btusb 3-1:1.0: usb_probe_interface
>[    6.375507] btusb 3-1:1.0: usb_probe_interface - got id
>[    6.375556] btusb 3-1:1.2: usb_probe_interface
>[    6.375558] btusb 3-1:1.2: usb_probe_interface - got id
>[    6.375567] btusb 3-1:1.3: usb_probe_interface
>[    6.375569] btusb 3-1:1.3: usb_probe_interface - got id
>[    6.375584] usbcore: registered new interface driver btusb
>[    6.394243] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
>[    6.459910] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input7
>[    6.596697] usb usb4: suspend_rh (auto-stop)
>[    6.596731] usb usb5: suspend_rh (auto-stop)
>[    6.596762] usb usb6: suspend_rh (auto-stop)
>[    6.596793] usb usb7: suspend_rh (auto-stop)
>[    6.957771] allocated 1280x800 fb: 0x007df000, bo ffff880138fffcc0
>[    6.959444] Console: switching to colour frame buffer device 128x48
>[    7.032977] [drm] TV-15: set mode 1024x768 1a
>[    7.138966] [drm] LVDS-8: set mode 1280x800 17
>[    7.369427] fb0: inteldrmfb frame buffer device
>[    7.369429] registered panic notifier
>[    7.374307] acpi device:02: registered as cooling_device7
>[    7.375164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input8
>[    7.375198] ACPI: Video Device [C098] (multi-head: yes  rom: no  post: no)
>[    7.375241] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    7.375250] work_for_cpu used greatest stack depth: 4640 bytes left
>[    8.346777] hub 4-0:1.0: hub_suspend
>[    8.346792] usb usb4: bus auto-suspend
>[    8.346797] usb usb4: suspend_rh
>[    8.346822] hub 5-0:1.0: hub_suspend
>[    8.346829] usb usb5: bus auto-suspend
>[    8.346834] usb usb5: suspend_rh
>[    8.346856] hub 6-0:1.0: hub_suspend
>[    8.346863] usb usb6: bus auto-suspend
>[    8.346868] usb usb6: suspend_rh
>[    8.346890] hub 7-0:1.0: hub_suspend
>[    8.346897] usb usb7: bus auto-suspend
>[    8.346902] usb usb7: suspend_rh
>[    8.578806] EXT4 FS on sda5, internal journal on sda5:8
>[   10.910443] Adding 2047992k swap on /swap.  Priority:-1 extents:18 across:36102136k 
>[   12.680732] usb usb3: uevent
>[   12.680883] usb 3-0:1.0: uevent
>[   12.681124] usb 3-1: uevent
>[   12.681265] usb 3-1:1.0: uevent
>[   12.681829] usb 3-1:1.1: uevent
>[   12.682178] usb 3-1:1.2: uevent
>[   12.682591] usb 3-1:1.3: uevent
>[   12.683110] usb usb4: uevent
>[   12.683248] usb 4-0:1.0: uevent
>[   12.683806] usb usb1: uevent
>[   12.683946] usb 1-0:1.0: uevent
>[   12.687121] usb usb5: uevent
>[   12.687261] usb 5-0:1.0: uevent
>[   12.687821] usb usb6: uevent
>[   12.687962] usb 6-0:1.0: uevent
>[   12.688481] usb usb7: uevent
>[   12.688618] usb 7-0:1.0: uevent
>[   12.689141] usb usb2: uevent
>[   12.689276] usb 2-0:1.0: uevent
>[   16.564554] iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode
>[   16.659370] iwlagn 0000:10:00.0: loaded firmware version 228.57.2.23
>[   16.860231] Registered led device: iwl-phy0::radio
>[   16.860278] Registered led device: iwl-phy0::assoc
>[   16.860320] Registered led device: iwl-phy0::RX
>[   16.860361] Registered led device: iwl-phy0::TX
>[   16.901504] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   22.313843] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
>[   22.366885] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
>[   22.368784] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   27.181349] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
>[   27.233530] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
>[   27.235237] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   27.596843] Registered led device: iwl-phy0::radio
>[   27.596889] Registered led device: iwl-phy0::assoc
>[   27.596931] Registered led device: iwl-phy0::RX
>[   27.596972] Registered led device: iwl-phy0::TX
>[   27.658332] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   27.977738] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8
>[   27.977770] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
>[   27.979547] wlan0: authenticated
>[   27.979552] wlan0: associate with AP 00:1f:3f:a2:9e:d8
>[   27.979558] wlan0: mismatch in privacy configuration and mixed-cell disabled - abort association
>[   27.994803] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8
>[   28.006384] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8
>[   28.006405] wlan0: authenticated
>[   28.006410] wlan0: associate with AP 00:1f:3f:a2:9e:d8
>[   28.024501] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8
>[   28.024521] wlan0: authenticated
>[   28.024526] wlan0: associate with AP 00:1f:3f:a2:9e:d8
>[   28.035206] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8
>[   28.035228] wlan0: authenticated
>[   28.035233] wlan0: associate with AP 00:1f:3f:a2:9e:d8
>[   28.040473] wlan0: RX AssocResp from 00:1f:3f:a2:9e:d8 (capab=0x411 status=0 aid=2)
>[   28.040480] wlan0: associated
>[   28.062296] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   38.286679] wlan0: no IPv6 routers present
>[   56.301451] kbuildsycoca4 used greatest stack depth: 4336 bytes left
>[   87.949991] [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22
>[  180.603190] [drm] LVDS-8: set mode 1280x800 17
>[  306.427181] kbuildsycoca4 used greatest stack depth: 4288 bytes left
>[  337.431992] [drm] LVDS-8: set mode 1280x800 17

Actions: View

Attachments on bug 22645: 27432 | 27433 | 27434

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.