[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.30-gentoo-r2 (root@mad-lap) (gcc version 4.4.0 (Gentoo 4.4.0 p1.1) ) #5 SMP Tue Jul 7 01:21:00 CEST 2009 [ 0.000000] Command line: root=/dev/sda5 video=intelfb mode=1280x800-24@60 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable) [ 0.000000] BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved) [ 0.000000] BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 13C000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf7b0000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf7b0000 page 4k [ 0.000000] kernel direct mapping tables up to bf7b0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ b000-11000 [ 0.000000] ACPI: RSDP 00000000000f7ac0 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 00000000bf7c8084 000F4 (v04 HP 30BE 00000003 HP 00000001) [ 0.000000] ACPI: DSDT 00000000bf7c8544 1334B (v01 HP nc65xx 00010000 MSFT 03000001) [ 0.000000] ACPI: FACS 00000000bf7e7d80 00040 [ 0.000000] ACPI: SLIC 00000000bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 00000000bf7c83c8 00038 (v01 HP 30BE 00000001 HP 00000001) [ 0.000000] ACPI: APIC 00000000bf7c8400 00068 (v01 HP 30BE 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 00000000bf7c8468 0003C (v01 HP 30BE 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 00000000bf7c84a4 00032 (v02 HP 30BE 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 00000000bf7c84d8 00069 (v16 HP CHIMAYU 00000001 HP 00000000) [ 0.000000] ACPI: SSDT 00000000bf7db88f 0032F (v01 HP HPQSAT 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bf7dbbbe 0017C (v01 HP HPQMRM 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 00000000bf7dc700 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 00000000bf7dc95f 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) [ 0.000000] ACPI: SSDT 00000000bf7dca05 004D7 (v01 HP CpuPm 00003000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013c000000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000013c000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000004fff] [ 0.000000] bootmap [000000000000c000 - 00000000000337ff] pages 28 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 013c000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000189a648] TEXT DATA BSS ==> [0001000000 - 000189a648] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [000189b000 - 000189b190] BRK ==> [000189b000 - 000189b190] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf7b0 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1029967 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3840 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765928 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf7b0000 - 00000000bf7c5000 [ 0.000000] PM: Registered nosave memory: 00000000bf7c5000 - 00000000bf7c6000 [ 0.000000] PM: Registered nosave memory: 00000000bf7c6000 - 00000000bf7e7000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e7000 - 00000000bf7e8000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e8000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000 [ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000 [ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000) [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages at ffff880028022000, static data 72736 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012168 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda5 video=intelfb mode=1280x800-24@60 [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:320 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.055 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Calgary: detecting Calgary via BIOS EBDA area [ 0.003333] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.003333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.003333] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.003333] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.003333] Memory: 3987180k/5177344k available (4725k kernel code, 1057476k absent, 132688k reserved, 2851k data, 480k init) [ 0.003333] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.003333] hpet clockevent registered [ 0.003333] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.36 BogoMIPS (lpj=6650183) [ 0.003333] Security Framework initialized [ 0.003333] SELinux: Initializing. [ 0.003333] SELinux: Starting in permissive mode [ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003883] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005324] Mount-cache hash table entries: 256 [ 0.005631] Initializing cgroup subsys ns [ 0.005750] Initializing cgroup subsys cpuacct [ 0.005875] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.006032] CPU: L2 cache: 4096K [ 0.006144] CPU 0/0x0 -> Node 0 [ 0.006256] CPU: Physical Processor ID: 0 [ 0.006368] CPU: Processor Core ID: 0 [ 0.006485] CPU0: Thermal monitoring handled by SMI [ 0.006489] using mwait in idle threads. [ 0.006622] ACPI: Core revision 20090320 [ 0.030070] Setting APIC routing to flat [ 0.033708] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066934] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 0.069999] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 3991.24 BogoMIPS (lpj=6649996) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 4096K [ 0.003333] CPU 1/0x1 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] CPU1: Thermal monitoring enabled (TM2) [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.161455] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 0.162754] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.163358] Brought up 2 CPUs [ 0.163471] Total of 2 processors activated (7983.61 BogoMIPS). [ 0.166732] khelper used greatest stack depth: 5792 bytes left [ 0.166860] net_namespace: 1424 bytes [ 0.166860] NET: Registered protocol family 16 [ 0.166860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.166860] ACPI: bus type pci registered [ 0.166976] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.166976] PCI: Not using MMCONFIG. [ 0.166976] PCI: Using configuration type 1 for base access [ 0.173370] bio: create slab at 0 [ 0.177595] ACPI: EC: Look up EC in DSDT [ 0.213351] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.246834] ACPI: Interpreter enabled [ 0.246949] ACPI: (supports S0 S3 S4 S5) [ 0.247250] ACPI: Using IOAPIC for interrupt routing [ 0.247434] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.255382] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources [ 0.258423] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.276849] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.276849] ACPI: EC: driver started in interrupt mode [ 0.276995] ACPI: Power Resource [C27A] (on) [ 0.277248] ACPI: Power Resource [C281] (on) [ 0.277419] ACPI: Power Resource [C29D] (on) [ 0.277594] ACPI: Power Resource [C1C5] (off) [ 0.277594] ACPI: Power Resource [C3B9] (off) [ 0.277594] ACPI: Power Resource [C3BA] (off) [ 0.277594] ACPI: Power Resource [C3BB] (off) [ 0.277594] ACPI: Power Resource [C3BC] (off) [ 0.277701] ACPI: Power Resource [C3BD] (off) [ 0.280390] ACPI: No dock devices found. [ 0.281383] ACPI: PCI Root Bridge [C003] (0000:00) [ 0.281543] pci 0000:00:02.0: reg 10 64bit mmio: [0xe4400000-0xe44fffff] [ 0.281543] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.281543] pci 0000:00:02.0: reg 20 io port: [0x4000-0x4007] [ 0.281543] pci 0000:00:02.1: reg 10 64bit mmio: [0xe4500000-0xe45fffff] [ 0.281543] pci 0000:00:03.0: reg 10 64bit mmio: [0xe4600000-0xe460000f] [ 0.281543] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.281543] pci 0000:00:03.0: PME# disabled [ 0.281543] pci 0000:00:03.2: reg 10 io port: [0x4008-0x400f] [ 0.281543] pci 0000:00:03.2: reg 14 io port: [0x4010-0x4013] [ 0.281543] pci 0000:00:03.2: reg 18 io port: [0x4018-0x401f] [ 0.281543] pci 0000:00:03.2: reg 1c io port: [0x4020-0x4023] [ 0.281543] pci 0000:00:03.2: reg 20 io port: [0x4030-0x403f] [ 0.281543] pci 0000:00:03.3: reg 10 io port: [0x4040-0x4047] [ 0.281543] pci 0000:00:03.3: reg 14 32bit mmio: [0xe4601000-0xe4601fff] [ 0.281543] pci 0000:00:19.0: reg 10 32bit mmio: [0xe4620000-0xe463ffff] [ 0.281543] pci 0000:00:19.0: reg 14 32bit mmio: [0xe4640000-0xe4640fff] [ 0.281543] pci 0000:00:19.0: reg 18 io port: [0x4060-0x407f] [ 0.281543] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.281543] pci 0000:00:19.0: PME# disabled [ 0.281543] pci 0000:00:1a.0: reg 20 io port: [0x4080-0x409f] [ 0.281543] pci 0000:00:1a.1: reg 20 io port: [0x40a0-0x40bf] [ 0.281543] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4641000-0xe46413ff] [ 0.281543] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.281543] pci 0000:00:1a.7: PME# disabled [ 0.281543] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4644000-0xe4647fff] [ 0.281543] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.281543] pci 0000:00:1b.0: PME# disabled [ 0.281543] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.281543] pci 0000:00:1c.0: PME# disabled [ 0.281639] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.281758] pci 0000:00:1c.1: PME# disabled [ 0.281964] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.282083] pci 0000:00:1c.4: PME# disabled [ 0.282261] pci 0000:00:1d.0: reg 20 io port: [0x40c0-0x40df] [ 0.282329] pci 0000:00:1d.1: reg 20 io port: [0x40e0-0x40ff] [ 0.282399] pci 0000:00:1d.2: reg 20 io port: [0x4100-0x411f] [ 0.282473] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4648000-0xe46483ff] [ 0.282540] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.282659] pci 0000:00:1d.7: PME# disabled [ 0.282947] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.283131] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.283250] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.283336] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f) [ 0.283523] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) [ 0.283756] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.283764] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.283772] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.283781] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.283789] pci 0000:00:1f.1: reg 20 io port: [0x4120-0x412f] [ 0.283866] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] [ 0.283874] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] [ 0.283882] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] [ 0.283890] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] [ 0.283898] pci 0000:00:1f.2: reg 20 io port: [0x4160-0x417f] [ 0.283907] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4649000-0xe46497ff] [ 0.283952] pci 0000:00:1f.2: PME# supported from D3hot [ 0.284069] pci 0000:00:1f.2: PME# disabled [ 0.284396] pci 0000:10:00.0: reg 10 64bit mmio: [0xe4000000-0xe4001fff] [ 0.284542] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.284684] pci 0000:10:00.0: PME# disabled [ 0.284904] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff] [ 0.284975] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff] [ 0.284981] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.285053] pci 0000:02:06.0: reg 10 32bit mmio: [0xe4100000-0xe4100fff] [ 0.285082] pci 0000:02:06.0: supports D1 D2 [ 0.285085] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285205] pci 0000:02:06.0: PME# disabled [ 0.285369] pci 0000:02:06.1: reg 10 32bit mmio: [0xe4101000-0xe4101fff] [ 0.285399] pci 0000:02:06.1: supports D1 D2 [ 0.285401] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285522] pci 0000:02:06.1: PME# disabled [ 0.285687] pci 0000:02:06.2: reg 10 32bit mmio: [0xe4102000-0xe41027ff] [ 0.285763] pci 0000:02:06.2: supports D1 D2 [ 0.285765] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285885] pci 0000:02:06.2: PME# disabled [ 0.286050] pci 0000:02:06.3: reg 10 32bit mmio: [0xe4103000-0xe41030ff] [ 0.286127] pci 0000:02:06.3: supports D1 D2 [ 0.286129] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.286250] pci 0000:02:06.3: PME# disabled [ 0.286415] pci 0000:02:06.4: reg 10 32bit mmio: [0xe4104000-0xe41040ff] [ 0.286491] pci 0000:02:06.4: supports D1 D2 [ 0.286493] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.286671] pci 0000:02:06.4: PME# disabled [ 0.286853] pci 0000:00:1e.0: transparent bridge [ 0.286973] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4100000-0xe43fffff] [ 0.287060] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.287377] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] [ 0.287517] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] [ 0.287612] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] [ 0.287709] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] [ 0.353597] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 0.354153] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.354707] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.355260] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5 [ 0.355856] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.356812] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5 [ 0.357407] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11) [ 0.357816] ACPI Exception (pci_link-0182): AE_NOT_FOUND, Evaluating _PRS [20090320] [ 0.360094] SCSI subsystem initialized [ 0.360122] libata version 3.00 loaded. [ 0.360122] usbcore: registered new interface driver usbfs [ 0.360145] usbcore: registered new interface driver hub [ 0.360145] usbcore: registered new device driver usb [ 0.360145] ACPI: WMI: Mapper loaded [ 0.360145] PCI: Using ACPI for IRQ routing [ 0.423363] cfg80211: Calling CRDA to update world regulatory domain [ 0.423474] NetLabel: Initializing [ 0.423474] NetLabel: domain hash size = 128 [ 0.423563] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.423689] NetLabel: unlabeled traffic allowed by default [ 0.426701] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.426990] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.449605] pnp: PnP ACPI init [ 0.449724] ACPI: bus type pnp registered [ 0.463915] pnp: PnP ACPI: found 16 devices [ 0.464029] ACPI: ACPI bus type pnp unregistered [ 0.464150] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.464267] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.464385] system 00:00: iomem range 0x100000-0xbf7fffff could not be reserved [ 0.464574] system 00:0c: ioport range 0x500-0x55f has been reserved [ 0.464690] system 00:0c: ioport range 0x800-0x80f has been reserved [ 0.464808] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.464926] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.465048] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 0.465165] system 00:0e: ioport range 0x1000-0x107f has been reserved [ 0.465282] system 00:0e: ioport range 0x1100-0x113f has been reserved [ 0.465399] system 00:0e: ioport range 0x1200-0x121f has been reserved [ 0.465517] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.465635] system 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved [ 0.465753] system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.465871] system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.465990] system 00:0e: iomem range 0xfed90000-0xfed99fff has been reserved [ 0.466111] system 00:0f: iomem range 0xcee00-0xcffff has been reserved [ 0.466229] system 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved [ 0.466350] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.471141] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.471257] pci 0000:00:1c.0: IO window: disabled [ 0.471375] pci 0000:00:1c.0: MEM window: disabled [ 0.471493] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.471614] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 [ 0.471730] pci 0000:00:1c.1: IO window: disabled [ 0.471849] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe40fffff [ 0.471967] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.472088] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28 [ 0.472206] pci 0000:00:1c.4: IO window: 0x2000-0x3fff [ 0.472325] pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff [ 0.472444] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.472569] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.472685] pci 0000:02:06.0: IO window: 0x005000-0x0050ff [ 0.472804] pci 0000:02:06.0: IO window: 0x005400-0x0054ff [ 0.472924] pci 0000:02:06.0: PREFETCH window: 0xc4000000-0xc7ffffff [ 0.473048] pci 0000:02:06.0: MEM window: 0xcc000000-0xcfffffff [ 0.473168] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04 [ 0.473284] pci 0000:02:06.1: IO window: 0x005800-0x0058ff [ 0.473403] pci 0000:02:06.1: IO window: 0x005c00-0x005cff [ 0.473523] pci 0000:02:06.1: PREFETCH window: 0xc8000000-0xcbffffff [ 0.473643] pci 0000:02:06.1: MEM window: 0xe8000000-0xebffffff [ 0.473762] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.473880] pci 0000:00:1e.0: IO window: 0x5000-0x5fff [ 0.473999] pci 0000:00:1e.0: MEM window: 0xe4100000-0xe43fffff [ 0.474118] pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000cbffffff [ 0.474316] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.474436] pci 0000:00:1c.0: setting latency timer to 64 [ 0.474446] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.474566] pci 0000:00:1c.1: setting latency timer to 64 [ 0.474576] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.474695] pci 0000:00:1c.4: setting latency timer to 64 [ 0.474703] pci 0000:00:1e.0: setting latency timer to 64 [ 0.474715] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.474844] pci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.474966] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.474969] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.474972] pci_bus 0000:10: resource 1 mem: [0xe4000000-0xe40fffff] [ 0.474974] pci_bus 0000:28: resource 0 io: [0x2000-0x3fff] [ 0.474977] pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff] [ 0.474979] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff] [ 0.474982] pci_bus 0000:02: resource 1 mem: [0xe4100000-0xe43fffff] [ 0.474984] pci_bus 0000:02: resource 2 pref mem [0xc4000000-0xcbffffff] [ 0.474987] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.474989] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.474991] pci_bus 0000:03: resource 0 io: [0x5000-0x50ff] [ 0.474994] pci_bus 0000:03: resource 1 io: [0x5400-0x54ff] [ 0.474996] pci_bus 0000:03: resource 2 pref mem [0xc4000000-0xc7ffffff] [ 0.474999] pci_bus 0000:03: resource 3 mem: [0xcc000000-0xcfffffff] [ 0.475001] pci_bus 0000:04: resource 0 io: [0x5800-0x58ff] [ 0.475003] pci_bus 0000:04: resource 1 io: [0x5c00-0x5cff] [ 0.475006] pci_bus 0000:04: resource 2 pref mem [0xc8000000-0xcbffffff] [ 0.475008] pci_bus 0000:04: resource 3 mem: [0xe8000000-0xebffffff] [ 0.475038] NET: Registered protocol family 2 [ 0.502936] Switched to high resolution mode on CPU 1 [ 0.503332] Switched to high resolution mode on CPU 0 [ 0.510997] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.512476] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.517373] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.518175] TCP: Hash tables configured (established 524288 bind 65536) [ 0.518292] TCP reno registered [ 0.527619] NET: Registered protocol family 1 [ 0.528992] Microcode Update Driver: v2.00 , Peter Oruba [ 0.529240] Intel AES-NI instructions are not detected. [ 0.529602] audit: initializing netlink socket (disabled) [ 0.529727] type=2000 audit(1246925290.527:1): initialized [ 0.540177] VFS: Disk quotas dquot_6.5.2 [ 0.540370] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.541528] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.542135] fuse init (API version 7.11) [ 0.542408] msgmni has been set to 7787 [ 0.543412] alg: No test for stdrng (krng) [ 0.543538] io scheduler noop registered [ 0.543651] io scheduler deadline registered [ 0.543834] io scheduler cfq registered (default) [ 0.543959] pci 0000:00:02.0: Boot video device [ 0.543974] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00 [ 0.543977] pci 0000:00:1a.0: Performing full reset [ 0.543996] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.543998] pci 0000:00:1a.1: Performing full reset [ 0.544058] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00 [ 0.544060] pci 0000:00:1d.0: Performing full reset [ 0.544079] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.544081] pci 0000:00:1d.1: Performing full reset [ 0.544100] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.544102] pci 0000:00:1d.2: Performing full reset [ 0.544375] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.544395] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.544645] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.544664] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.544910] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.544929] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.548582] Linux agpgart interface v0.103 [ 0.552853] ACPI: AC Adapter [C239] (on-line) [ 0.553095] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.553279] ACPI: Power Button [PWRF] [ 0.553494] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.553678] ACPI: Sleep Button [C2BB] [ 0.553866] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 0.554128] ACPI: Lid Switch [C153] [ 0.554602] fan PNP0C0B:00: registered as cooling_device0 [ 0.554720] ACPI: Fan [C3BE] (off) [ 0.555114] fan PNP0C0B:01: registered as cooling_device1 [ 0.555231] ACPI: Fan [C3BF] (off) [ 0.555626] fan PNP0C0B:02: registered as cooling_device2 [ 0.555743] ACPI: Fan [C3C0] (off) [ 0.557935] fan PNP0C0B:03: registered as cooling_device3 [ 0.558051] ACPI: Fan [C3C1] (off) [ 0.558443] fan PNP0C0B:04: registered as cooling_device4 [ 0.558559] ACPI: Fan [C3C2] (off) [ 0.559142] ACPI: SSDT 00000000bf7dbe02 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317) [ 0.559949] ACPI: SSDT 00000000bf7dc106 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) [ 0.563064] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] [ 0.563690] Monitor-Mwait will be used to enter C-1 state [ 0.563711] Monitor-Mwait will be used to enter C-2 state [ 0.563720] Marking TSC unstable due to TSC halts in idle [ 0.563880] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.564166] processor ACPI_CPU:00: registered as cooling_device5 [ 0.564284] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.564861] ACPI: SSDT 00000000bf7dbd3a 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) [ 0.565530] ACPI: SSDT 00000000bf7dc081 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) [ 0.566511] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] [ 0.567258] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.567559] processor ACPI_CPU:01: registered as cooling_device6 [ 0.567677] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.578799] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.578921] ACPI: Thermal Zone [TZ3] (34 C) [ 0.587989] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.588110] ACPI: Thermal Zone [TZ4] (30 C) [ 0.591669] thermal LNXTHERM:03: registered as thermal_zone2 [ 0.591790] ACPI: Thermal Zone [TZ5] (50 C) [ 0.608873] thermal LNXTHERM:04: registered as thermal_zone3 [ 0.608995] ACPI: Thermal Zone [TZ0] (50 C) [ 0.613454] thermal LNXTHERM:05: registered as thermal_zone4 [ 0.613575] ACPI: Thermal Zone [TZ1] (54 C) [ 0.614536] [drm] Initialized drm 1.1.0 20060810 [ 0.614703] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.656300] ACPI: Battery Slot [C23B] (battery present) [ 0.699383] ACPI: Battery Slot [C23A] (battery present) [ 0.953506] serial8250: ttyS2 at I/O 0x3e8 (irq = 6) is a 16550A [ 0.954066] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.954276] 0000:00:03.3: ttyS0 at I/O 0x4040 (irq = 17) is a 16550A [ 0.954778] brd: module loaded [ 0.955817] loop: module loaded [ 0.956019] Loading iSCSI transport class v2.0-870. [ 0.956439] Driver 'sd' needs updating - please use bus_type methods [ 0.956603] Driver 'sr' needs updating - please use bus_type methods [ 0.956854] ahci 0000:00:1f.2: version 3.0 [ 0.956868] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.957037] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 0.957068] ahci: SSS flag set, parallel bus scan disabled [ 0.957205] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 0.957390] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part [ 0.957582] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.957679] scsi0 : ahci [ 0.957947] scsi1 : ahci [ 0.958184] scsi2 : ahci [ 0.958429] ata1: SATA max UDMA/133 abar m2048@0xe4649000 port 0xe4649100 irq 27 [ 0.958611] ata2: DUMMY [ 0.958722] ata3: DUMMY [ 0.958957] ata_piix 0000:00:1f.1: version 2.13 [ 0.958966] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.959111] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.959184] scsi3 : ata_piix [ 0.959418] scsi4 : ata_piix [ 0.960368] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4120 irq 14 [ 0.960486] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4128 irq 15 [ 0.960615] work_for_cpu used greatest stack depth: 5152 bytes left [ 0.960985] console [netcon0] enabled [ 0.961097] netconsole: network logging started [ 0.961301] firewire_ohci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 1.033349] firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10 [ 1.033694] usbmon: debugfs is not available [ 1.033808] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.033926] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 1.033970] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.034097] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.034101] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.034290] drivers/usb/core/inode.c: creating file 'devices' [ 1.034295] drivers/usb/core/inode.c: creating file '001' [ 1.034299] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.034488] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 [ 1.034493] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 1.034515] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.038402] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.038521] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.038523] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 1.038535] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4641000 [ 1.038653] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.042541] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 1.050014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.050145] usb usb1: default language 0x0409 [ 1.050152] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.050269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.050451] usb usb1: Product: EHCI Host Controller [ 1.050565] usb usb1: Manufacturer: Linux 2.6.30-gentoo-r2 ehci_hcd [ 1.050681] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.050832] usb usb1: uevent [ 1.050877] usb usb1: usb_probe_device [ 1.050880] usb usb1: configuration #1 chosen from 1 choice [ 1.051000] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.051017] usb 1-0:1.0: uevent [ 1.051058] hub 1-0:1.0: usb_probe_interface [ 1.051060] hub 1-0:1.0: usb_probe_interface - got id [ 1.051063] hub 1-0:1.0: USB hub found [ 1.051182] hub 1-0:1.0: 4 ports detected [ 1.051295] hub 1-0:1.0: standalone hub [ 1.051296] hub 1-0:1.0: no power switching (usb 1.0) [ 1.051298] hub 1-0:1.0: individual port over-current protection [ 1.051300] hub 1-0:1.0: power on to power good time: 20ms [ 1.051304] hub 1-0:1.0: local power source is good [ 1.051306] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.051421] drivers/usb/core/inode.c: creating file '001' [ 1.051524] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.051651] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.051654] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.051820] drivers/usb/core/inode.c: creating file '002' [ 1.051825] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.052012] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 1.052017] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 1.052038] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.055918] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.056037] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.056039] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 1.056045] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4648000 [ 1.056163] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.060060] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 1.070014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.070138] usb usb2: default language 0x0409 [ 1.070145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.070261] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.070442] usb usb2: Product: EHCI Host Controller [ 1.070557] usb usb2: Manufacturer: Linux 2.6.30-gentoo-r2 ehci_hcd [ 1.070672] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.070817] usb usb2: uevent [ 1.070867] usb usb2: usb_probe_device [ 1.070869] usb usb2: configuration #1 chosen from 1 choice [ 1.070989] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.071006] usb 2-0:1.0: uevent [ 1.071047] hub 2-0:1.0: usb_probe_interface [ 1.071049] hub 2-0:1.0: usb_probe_interface - got id [ 1.071051] hub 2-0:1.0: USB hub found [ 1.071169] hub 2-0:1.0: 6 ports detected [ 1.071282] hub 2-0:1.0: standalone hub [ 1.071283] hub 2-0:1.0: no power switching (usb 1.0) [ 1.071285] hub 2-0:1.0: individual port over-current protection [ 1.071287] hub 2-0:1.0: power on to power good time: 20ms [ 1.071291] hub 2-0:1.0: local power source is good [ 1.071293] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.071372] drivers/usb/core/inode.c: creating file '001' [ 1.071530] usbcore: registered new interface driver usblp [ 1.071687] usbcore: registered new interface driver cdc_wdm [ 1.071804] Initializing USB Mass Storage driver... [ 1.071969] usbcore: registered new interface driver usb-storage [ 1.072086] USB Mass Storage support registered. [ 1.072249] usbcore: registered new interface driver libusual [ 1.072476] PNP: PS/2 Controller [PNP0303:C29A,PNP0f13:C29B] at 0x60,0x64 irq 1,12 [ 1.074535] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.075414] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.075533] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.075649] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.075765] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.075882] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.076050] mice: PS/2 mouse device common for all mice [ 1.076500] rtc_cmos 00:08: RTC can wake from S4 [ 1.076677] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.076824] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.077025] Linux video capture interface: v2.00 [ 1.077448] lis3lv02d: laptop model unknown, using default axes configuration [ 1.078324] lis3lv02d: 2-byte sensor found [ 1.090697] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input3 [ 1.090982] lis3_init_device: irq 23 [ 1.091094] lis3: registering device [ 1.091298] Registered led device: hp::hddprotect [ 1.091452] lis3lv02d driver loaded. [ 1.091725] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 1.092259] cpuidle: using governor ladder [ 1.092792] cpuidle: using governor menu [ 1.092950] sdhci: Secure Digital Host Controller Interface driver [ 1.093069] sdhci: Copyright(c) Pierre Ossman [ 1.093264] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20) [ 1.093484] sdhci-pci 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.095785] Registered led device: mmc0:: [ 1.097003] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 1.097183] ricoh-mmc: Ricoh MMC Controller disabling driver [ 1.097298] ricoh-mmc: Copyright(c) Philip Langdale [ 1.097466] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10) [ 1.097690] ricoh-mmc: Controller is now disabled. [ 1.097866] No iBFT detected. [ 1.098853] usbcore: registered new interface driver hiddev [ 1.099003] usbcore: registered new interface driver usbhid [ 1.099117] usbhid: v2.6:USB HID core driver [ 1.101261] input: HP WMI hotkeys as /devices/virtual/input/input4 [ 1.113380] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 1.121267] ata4.00: ATAPI: Optiarc DVD RW AD-7913A, 1.00, max UDMA/33 [ 1.137813] ata4.00: configured for UDMA/33 [ 1.144802] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 1.144931] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.145134] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1.150220] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 1.150224] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.170095] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.226055] work_for_cpu used greatest stack depth: 4952 bytes left [ 1.226129] ALSA device list: [ 1.226131] #0: HDA Intel at 0xe4644000 irq 17 [ 1.226455] IPv4 over IPv4 tunneling driver [ 1.226905] TCP cubic registered [ 1.227017] Initializing XFRM netlink socket [ 1.227394] NET: Registered protocol family 10 [ 1.228333] IPv6 over IPv4 tunneling driver [ 1.228939] NET: Registered protocol family 17 [ 1.229225] RPC: Registered udp transport module. [ 1.229340] RPC: Registered tcp transport module. [ 1.230408] PM: Resume from disk failed. [ 1.250059] hub 1-0:1.0: state 7 ports 4 chg 0002 evt 0000 [ 1.250067] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.276740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.280356] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.280473] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 1.281723] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 1.281731] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.284014] ata1.00: ATA-7: ST9120822AS, 3.BHD, max UDMA/100 [ 1.284163] ata1.00: 234441648 sectors, multi 16: LBA48 [ 1.292536] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 1.292687] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 1.294674] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 1.294682] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 1.297040] ata1.00: configured for UDMA/100 [ 1.303570] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion [ 1.303581] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT [ 1.303590] hub 1-0:1.0: port 1 not reset yet, waiting 50ms [ 1.315566] ata1.00: configured for UDMA/100 [ 1.315713] ata1: EH complete [ 1.316056] scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 [ 1.317091] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 1.317354] sd 0:0:0:0: [sda] Write Protect is off [ 1.317500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.317586] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.318035] sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.325174] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7913A 1.00 PQ: 0 ANSI: 5 [ 1.356732] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC [ 1.356768] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 1.358989] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.359220] Uniform CD-ROM driver Revision: 3.20 [ 1.359826] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.360196] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.360436] ata5: port disabled. ignoring. [ 1.379816] sda1 sda2 sda3 < sda5 > [ 1.392595] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.500073] Clocksource tsc unstable (delta = -304834768 ns) [ 1.533707] firewire_core: created device fw0: GUID 00023f9929c12c0e, S400 [ 1.721192] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 [ 1.721426] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 1.762466] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 1.787259] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 1.799932] EXT3-fs: sda5: couldn't mount because of unsupported optional features (240). [ 1.801781] EXT2-fs: sda5: couldn't mount because of unsupported optional features (240). [ 1.879272] EXT4-fs: barriers enabled [ 1.896061] kjournald2 starting: pid 877, dev sda5:8, commit interval 5 seconds [ 1.896126] EXT4-fs: delayed allocation enabled [ 1.896130] EXT4-fs: file extents enabled [ 1.896930] EXT4-fs: mballoc enabled [ 1.897094] EXT4-fs: mounted filesystem sda5 with ordered data mode [ 1.897258] VFS: Mounted root (ext4 filesystem) readonly on device 8:5. [ 1.897455] Freeing unused kernel memory: 480k freed [ 1.897947] Write protecting the kernel read-only data: 6832k [ 3.136018] init-early.sh used greatest stack depth: 4880 bytes left [ 3.346735] hub 2-0:1.0: hub_suspend [ 3.346750] usb usb2: bus auto-suspend [ 3.346756] ehci_hcd 0000:00:1d.7: suspend root hub [ 4.096544] runscript.sh used greatest stack depth: 4696 bytes left [ 4.350051] hub 1-0:1.0: hub_suspend [ 4.350066] usb usb1: bus auto-suspend [ 4.350072] ehci_hcd 0000:00:1a.7: suspend root hub [ 5.008483] udev: starting version 141 [ 5.065234] usb usb1: uevent [ 5.065282] usb 1-0:1.0: uevent [ 5.066445] usb usb2: uevent [ 5.066494] usb 2-0:1.0: uevent [ 5.329304] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 [ 5.329307] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 5.329412] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.329426] e1000e 0000:00:19.0: setting latency timer to 64 [ 5.329578] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 5.407657] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets [ 5.407660] intelfb: Version 0.9.6 [ 5.444595] uhci_hcd: USB Universal Host Controller Interface driver [ 5.461888] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30be] [ 5.477306] parport_pc 00:03: reported by Plug and Play ACPI [ 5.477347] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] [ 5.528775] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 5.528777] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 5.529626] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.529660] iwlagn 0000:10:00.0: setting latency timer to 64 [ 5.529808] iwlagn 0000:10:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 5.535729] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:d4:ef:9a:ac [ 5.535732] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 5.535763] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff [ 5.538120] NET: Registered protocol family 23 [ 5.538552] intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.538561] intelfb: 00:02.0: Intel(R) 965GM, aperture size 256MB, stolen memory 7932kB [ 5.538564] intelfb: cannot acquire agp [ 5.538786] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 5.539887] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 5.543642] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 5.580038] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.580052] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.580058] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.580109] drivers/usb/core/inode.c: creating file '003' [ 5.580119] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 5.580130] uhci_hcd 0000:00:1a.0: detected 2 ports [ 5.580138] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.580141] uhci_hcd 0000:00:1a.0: Performing full reset [ 5.580159] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 5.580183] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004080 [ 5.580234] usb usb3: default language 0x0409 [ 5.580246] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.580250] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.580254] usb usb3: Product: UHCI Host Controller [ 5.580258] usb usb3: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd [ 5.580261] usb usb3: SerialNumber: 0000:00:1a.0 [ 5.580333] usb usb3: uevent [ 5.580352] usb usb3: usb_probe_device [ 5.580356] usb usb3: configuration #1 chosen from 1 choice [ 5.580367] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 5.580392] usb 3-0:1.0: uevent [ 5.580410] hub 3-0:1.0: usb_probe_interface [ 5.580413] hub 3-0:1.0: usb_probe_interface - got id [ 5.580417] hub 3-0:1.0: USB hub found [ 5.580427] hub 3-0:1.0: 2 ports detected [ 5.580430] hub 3-0:1.0: standalone hub [ 5.580432] hub 3-0:1.0: no power switching (usb 1.0) [ 5.580435] hub 3-0:1.0: individual port over-current protection [ 5.580439] hub 3-0:1.0: power on to power good time: 2ms [ 5.580446] hub 3-0:1.0: local power source is good [ 5.580449] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 5.580509] drivers/usb/core/inode.c: creating file '001' [ 5.580664] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.580675] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 5.580680] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.580719] drivers/usb/core/inode.c: creating file '004' [ 5.580727] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.580737] uhci_hcd 0000:00:1a.1: detected 2 ports [ 5.580744] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.580747] uhci_hcd 0000:00:1a.1: Performing full reset [ 5.580765] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 5.580774] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000040a0 [ 5.580818] usb usb4: default language 0x0409 [ 5.580829] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.580833] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.580841] usb usb4: Product: UHCI Host Controller [ 5.580844] usb usb4: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd [ 5.580848] usb usb4: SerialNumber: 0000:00:1a.1 [ 5.580909] usb usb4: uevent [ 5.580924] usb usb4: usb_probe_device [ 5.580928] usb usb4: configuration #1 chosen from 1 choice [ 5.580937] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 5.580961] usb 4-0:1.0: uevent [ 5.580978] hub 4-0:1.0: usb_probe_interface [ 5.580981] hub 4-0:1.0: usb_probe_interface - got id [ 5.580984] hub 4-0:1.0: USB hub found [ 5.580994] hub 4-0:1.0: 2 ports detected [ 5.580997] hub 4-0:1.0: standalone hub [ 5.581000] hub 4-0:1.0: no power switching (usb 1.0) [ 5.581003] hub 4-0:1.0: individual port over-current protection [ 5.581006] hub 4-0:1.0: power on to power good time: 2ms [ 5.581013] hub 4-0:1.0: local power source is good [ 5.581016] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 5.581069] drivers/usb/core/inode.c: creating file '001' [ 5.581219] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.581229] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.581235] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.581270] drivers/usb/core/inode.c: creating file '005' [ 5.581278] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 5.581288] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.581294] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.581298] uhci_hcd 0000:00:1d.0: Performing full reset [ 5.581315] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 5.581324] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040c0 [ 5.581368] usb usb5: default language 0x0409 [ 5.581379] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.581384] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.581387] usb usb5: Product: UHCI Host Controller [ 5.581391] usb usb5: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd [ 5.581394] usb usb5: SerialNumber: 0000:00:1d.0 [ 5.581455] usb usb5: uevent [ 5.581470] usb usb5: usb_probe_device [ 5.581473] usb usb5: configuration #1 chosen from 1 choice [ 5.581483] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 5.581507] usb 5-0:1.0: uevent [ 5.581524] hub 5-0:1.0: usb_probe_interface [ 5.581527] hub 5-0:1.0: usb_probe_interface - got id [ 5.581530] hub 5-0:1.0: USB hub found [ 5.581540] hub 5-0:1.0: 2 ports detected [ 5.581543] hub 5-0:1.0: standalone hub [ 5.581545] hub 5-0:1.0: no power switching (usb 1.0) [ 5.581548] hub 5-0:1.0: individual port over-current protection [ 5.581552] hub 5-0:1.0: power on to power good time: 2ms [ 5.581558] hub 5-0:1.0: local power source is good [ 5.581562] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 5.581614] drivers/usb/core/inode.c: creating file '001' [ 5.581753] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 5.581763] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.581769] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.581804] drivers/usb/core/inode.c: creating file '006' [ 5.581811] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 5.581821] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.581828] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.581832] uhci_hcd 0000:00:1d.1: Performing full reset [ 5.581849] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 5.581868] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000040e0 [ 5.581919] usb usb6: default language 0x0409 [ 5.581930] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.581935] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.581938] usb usb6: Product: UHCI Host Controller [ 5.581942] usb usb6: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd [ 5.581945] usb usb6: SerialNumber: 0000:00:1d.1 [ 5.582013] usb usb6: uevent [ 5.582031] usb usb6: usb_probe_device [ 5.582035] usb usb6: configuration #1 chosen from 1 choice [ 5.582044] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 5.582068] usb 6-0:1.0: uevent [ 5.582097] hub 6-0:1.0: usb_probe_interface [ 5.582100] hub 6-0:1.0: usb_probe_interface - got id [ 5.582103] hub 6-0:1.0: USB hub found [ 5.582112] hub 6-0:1.0: 2 ports detected [ 5.582115] hub 6-0:1.0: standalone hub [ 5.582118] hub 6-0:1.0: no power switching (usb 1.0) [ 5.582121] hub 6-0:1.0: individual port over-current protection [ 5.582124] hub 6-0:1.0: power on to power good time: 2ms [ 5.582131] hub 6-0:1.0: local power source is good [ 5.582134] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 5.582187] drivers/usb/core/inode.c: creating file '001' [ 5.582324] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.582335] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.582340] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.582374] drivers/usb/core/inode.c: creating file '007' [ 5.582382] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 5.582392] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.582399] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 5.582402] uhci_hcd 0000:00:1d.2: Performing full reset [ 5.582420] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 5.582429] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004100 [ 5.582472] usb usb7: default language 0x0409 [ 5.582483] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.582487] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.582491] usb usb7: Product: UHCI Host Controller [ 5.582495] usb usb7: Manufacturer: Linux 2.6.30-gentoo-r2 uhci_hcd [ 5.582498] usb usb7: SerialNumber: 0000:00:1d.2 [ 5.582559] usb usb7: uevent [ 5.582574] usb usb7: usb_probe_device [ 5.582577] usb usb7: configuration #1 chosen from 1 choice [ 5.582586] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 5.582611] usb 7-0:1.0: uevent [ 5.582627] hub 7-0:1.0: usb_probe_interface [ 5.582630] hub 7-0:1.0: usb_probe_interface - got id [ 5.582633] hub 7-0:1.0: USB hub found [ 5.582643] hub 7-0:1.0: 2 ports detected [ 5.582645] hub 7-0:1.0: standalone hub [ 5.582648] hub 7-0:1.0: no power switching (usb 1.0) [ 5.582651] hub 7-0:1.0: individual port over-current protection [ 5.582654] hub 7-0:1.0: power on to power good time: 2ms [ 5.582661] hub 7-0:1.0: local power source is good [ 5.582664] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 5.582720] drivers/usb/core/inode.c: creating file '001' [ 5.587460] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c38, PCI irq 18 [ 5.587467] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 5.587476] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 5.587482] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 5.587487] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff [ 5.592436] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30be] [ 5.593460] iwlagn 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 5.593569] iwlagn 0000:10:00.0: irq 29 for MSI/MSI-X [ 5.597980] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 5.658081] tpm_inf_pnp 00:04: Found C282 with ID IFX0102 [ 5.658147] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 5.680197] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00 [ 5.680205] hub 3-0:1.0: port 1: status 0101 change 0001 [ 5.680282] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.680291] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.680297] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.680302] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.698773] i915 0000:00:02.0: setting latency timer to 64 [ 5.726851] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0000, PCI irq 19 [ 5.726860] yenta_cardbus 0000:02:06.1: Socket status: 30000810 [ 5.726869] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 5.726888] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 5.726897] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 5.726904] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff [ 5.747104] i915 0000:00:02.0: irq 30 for MSI/MSI-X [ 5.781423] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 5.781449] hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 5.940127] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 6.094336] usb 3-1: skipped 1 descriptor after interface [ 6.097262] usb 3-1: default language 0x0409 [ 6.107249] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d [ 6.107252] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.107254] usb 3-1: Product: HP Integrated Module [ 6.107257] usb 3-1: Manufacturer: Broadcom Corp [ 6.107322] usb 3-1: uevent [ 6.107342] usb 3-1: usb_probe_device [ 6.107345] usb 3-1: configuration #1 chosen from 1 choice [ 6.110256] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 6.110277] usb 3-1:1.0: uevent [ 6.110389] usb 3-1: adding 3-1:1.1 (config #1, interface 1) [ 6.110405] usb 3-1:1.1: uevent [ 6.110474] usb 3-1: adding 3-1:1.2 (config #1, interface 2) [ 6.110490] usb 3-1:1.2: uevent [ 6.110558] usb 3-1: adding 3-1:1.3 (config #1, interface 3) [ 6.110574] usb 3-1:1.3: uevent [ 6.110592] drivers/usb/core/inode.c: creating file '002' [ 6.343300] Bluetooth: Core ver 2.15 [ 6.343539] NET: Registered protocol family 31 [ 6.343549] Bluetooth: HCI device and connection manager initialized [ 6.343552] Bluetooth: HCI socket layer initialized [ 6.375481] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 6.375505] btusb 3-1:1.0: usb_probe_interface [ 6.375507] btusb 3-1:1.0: usb_probe_interface - got id [ 6.375556] btusb 3-1:1.2: usb_probe_interface [ 6.375558] btusb 3-1:1.2: usb_probe_interface - got id [ 6.375567] btusb 3-1:1.3: usb_probe_interface [ 6.375569] btusb 3-1:1.3: usb_probe_interface - got id [ 6.375584] usbcore: registered new interface driver btusb [ 6.394243] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 6.459910] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input7 [ 6.596697] usb usb4: suspend_rh (auto-stop) [ 6.596731] usb usb5: suspend_rh (auto-stop) [ 6.596762] usb usb6: suspend_rh (auto-stop) [ 6.596793] usb usb7: suspend_rh (auto-stop) [ 6.957771] allocated 1280x800 fb: 0x007df000, bo ffff880138fffcc0 [ 6.959444] Console: switching to colour frame buffer device 128x48 [ 7.032977] [drm] TV-15: set mode 1024x768 1a [ 7.138966] [drm] LVDS-8: set mode 1280x800 17 [ 7.369427] fb0: inteldrmfb frame buffer device [ 7.369429] registered panic notifier [ 7.374307] acpi device:02: registered as cooling_device7 [ 7.375164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input8 [ 7.375198] ACPI: Video Device [C098] (multi-head: yes rom: no post: no) [ 7.375241] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.375250] work_for_cpu used greatest stack depth: 4640 bytes left [ 8.346777] hub 4-0:1.0: hub_suspend [ 8.346792] usb usb4: bus auto-suspend [ 8.346797] usb usb4: suspend_rh [ 8.346822] hub 5-0:1.0: hub_suspend [ 8.346829] usb usb5: bus auto-suspend [ 8.346834] usb usb5: suspend_rh [ 8.346856] hub 6-0:1.0: hub_suspend [ 8.346863] usb usb6: bus auto-suspend [ 8.346868] usb usb6: suspend_rh [ 8.346890] hub 7-0:1.0: hub_suspend [ 8.346897] usb usb7: bus auto-suspend [ 8.346902] usb usb7: suspend_rh [ 8.578806] EXT4 FS on sda5, internal journal on sda5:8 [ 10.910443] Adding 2047992k swap on /swap. Priority:-1 extents:18 across:36102136k [ 12.680732] usb usb3: uevent [ 12.680883] usb 3-0:1.0: uevent [ 12.681124] usb 3-1: uevent [ 12.681265] usb 3-1:1.0: uevent [ 12.681829] usb 3-1:1.1: uevent [ 12.682178] usb 3-1:1.2: uevent [ 12.682591] usb 3-1:1.3: uevent [ 12.683110] usb usb4: uevent [ 12.683248] usb 4-0:1.0: uevent [ 12.683806] usb usb1: uevent [ 12.683946] usb 1-0:1.0: uevent [ 12.687121] usb usb5: uevent [ 12.687261] usb 5-0:1.0: uevent [ 12.687821] usb usb6: uevent [ 12.687962] usb 6-0:1.0: uevent [ 12.688481] usb usb7: uevent [ 12.688618] usb 7-0:1.0: uevent [ 12.689141] usb usb2: uevent [ 12.689276] usb 2-0:1.0: uevent [ 16.564554] iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 16.659370] iwlagn 0000:10:00.0: loaded firmware version 228.57.2.23 [ 16.860231] Registered led device: iwl-phy0::radio [ 16.860278] Registered led device: iwl-phy0::assoc [ 16.860320] Registered led device: iwl-phy0::RX [ 16.860361] Registered led device: iwl-phy0::TX [ 16.901504] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.313843] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 22.366885] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 22.368784] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.181349] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 27.233530] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 27.235237] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.596843] Registered led device: iwl-phy0::radio [ 27.596889] Registered led device: iwl-phy0::assoc [ 27.596931] Registered led device: iwl-phy0::RX [ 27.596972] Registered led device: iwl-phy0::TX [ 27.658332] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.977738] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8 [ 27.977770] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate [ 27.979547] wlan0: authenticated [ 27.979552] wlan0: associate with AP 00:1f:3f:a2:9e:d8 [ 27.979558] wlan0: mismatch in privacy configuration and mixed-cell disabled - abort association [ 27.994803] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8 [ 28.006384] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8 [ 28.006405] wlan0: authenticated [ 28.006410] wlan0: associate with AP 00:1f:3f:a2:9e:d8 [ 28.024501] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8 [ 28.024521] wlan0: authenticated [ 28.024526] wlan0: associate with AP 00:1f:3f:a2:9e:d8 [ 28.035206] wlan0: authenticate with AP 00:1f:3f:a2:9e:d8 [ 28.035228] wlan0: authenticated [ 28.035233] wlan0: associate with AP 00:1f:3f:a2:9e:d8 [ 28.040473] wlan0: RX AssocResp from 00:1f:3f:a2:9e:d8 (capab=0x411 status=0 aid=2) [ 28.040480] wlan0: associated [ 28.062296] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 38.286679] wlan0: no IPv6 routers present [ 56.301451] kbuildsycoca4 used greatest stack depth: 4336 bytes left [ 87.949991] [drm:drm_wait_vblank] *ERROR* failed to acquire vblank counter, -22 [ 180.603190] [drm] LVDS-8: set mode 1280x800 17 [ 306.427181] kbuildsycoca4 used greatest stack depth: 4288 bytes left [ 337.431992] [drm] LVDS-8: set mode 1280x800 17