Attachment 24316 Details for Bug 20864 – dmesg

dmesg

dmesg (text/plain), 39.33 KB, created by V P on 2009-03-27 04:24:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: V P

Created: 2009-03-27 04:24:36 UTC

Size: 39.33 KB

patch

obsolete

>Linux version 2.6.29-desktop-1mnb (herton@build1.conectiva) (gcc version 4.3.2 (GCC) ) #1 SMP Thu Mar 26 02:43:20 BRT 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>PAT WC disabled due to known CPU erratum.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
> BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)
> BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)
> BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>last_pfn = 0x3f7d0 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>RAMDISK: 37c3f000 - 37fef820
>Allocated new RAMDISK: 0065b000 - 00a0b820
>Move RAMDISK from 0000000037c3f000 - 0000000037fef81f to 0065b000 - 00a0b81f
>ACPI: RSDP 000F7C30, 0024 (r2 HP    )
>ACPI: XSDT 3F7E57C4, 0074 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP 3F7E5684, 00F4 (r4 HP     30AA            3 HP          1)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 3F7E5AC0, FBEB (r1 HP       nc6340    10000 MSFT  100000E)
>ACPI: FACS 3F7F7E80, 0040
>ACPI: SLIC 3F7E5838, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET 3F7E59B0, 0038 (r1 HP     30AA            1 HP          1)
>ACPI: APIC 3F7E59E8, 0068 (r1 HP     30AA            1 HP          1)
>ACPI: MCFG 3F7E5A50, 003C (r1 HP     30AA            1 HP          1)
>ACPI: TCPA 3F7E5A8C, 0032 (r2 HP     30AA            1 HP          1)
>ACPI: SSDT 3F7F56AB, 0326 (r1 HP       HPQSAT        1 MSFT  100000E)
>ACPI: SSDT 3F7F6226, 025F (r1 HP      Cpu0Tst     3000 INTL 20050624)
>ACPI: SSDT 3F7F6485, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20050624)
>ACPI: SSDT 3F7F652B, 04D7 (r1 HP        CpuPm     3000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>127MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 00000000 - 377fe000
>  bootmap 00008000 - 0000ef00
>(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 0000657424]    TEXT DATA BSS ==> [0000100000 - 0000657424]
>  #4 [0000658000 - 000065b000]    INIT_PG_TABLE ==> [0000658000 - 000065b000]
>  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #7 [000065b000 - 0000a0b820]      NEW RAMDISK ==> [000065b000 - 0000a0b820]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0003f7d0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003f7d0
>On node 0 totalpages: 259951
>free_area_init_node: node 0, pgdat c0505a80, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 256 pages used for memmap
>  HighMem zone: 32466 pages, LIFO batch:7
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Allocating 40960 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257919
>Kernel command line: BOOT_IMAGE=linux root=UUID=ce6bd393-c8c0-48bb-b557-8bab3df82fdd speedboot resume=UUID=77ea8c85-a6bf-4a5c-9f7f-81ffbc3d6e11 splash=silent vga=788
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 1994.922 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1021140k/1040192k available (2753k kernel code, 18316k reserved, 1594k data, 456k init, 130888k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc0546000 - 0xc05b8000   ( 456 kB)
>      .data : 0xc03b05dd - 0xc053ef08   (1594 kB)
>      .text : 0xc0100000 - 0xc03b05dd   (2753 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.84 BogoMIPS (lpj=1994922)
>Security Framework initialized
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>Early unpacking initramfs... done
>Freeing initrd memory: 3778k freed
>ACPI: Core revision 20081204
>ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.84 BogoMIPS (lpj=1994920)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (7979.68 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>net_namespace: 1056 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>Time: 11:01:10  Date: 03/27/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [C002] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xe8400000-0xe847ffff]
>pci 0000:00:02.0: reg 14 io port: [0x6000-0x6007]
>pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0xe8480000-0xe84bffff]
>pci 0000:00:02.1: reg 10 32bit mmio: [0xe8500000-0xe857ffff]
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xe8580000-0xe8583fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x6020-0x603f]
>pci 0000:00:1d.1: reg 20 io port: [0x6040-0x605f]
>pci 0000:00:1d.2: reg 20 io port: [0x6060-0x607f]
>pci 0000:00:1d.3: reg 20 io port: [0x6080-0x609f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8584000-0xe85843ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 20 io port: [0x60a0-0x60af]
>pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7]
>pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7]
>pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377]
>pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577]
>pci 0000:00:1f.2: reg 20 io port: [0x60d0-0x60df]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xe8585000-0xe85853ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:08:00.0: reg 10 32bit mmio: [0xe8000000-0xe8000fff]
>pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:08:00.0: PME# disabled
>pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: bridge 32bit mmio: [0xe8000000-0xe80fffff]
>pci 0000:00:1c.2: bridge io port: [0x4000-0x5fff]
>pci 0000:00:1c.2: bridge 32bit mmio: [0xe4000000-0xe7ffffff]
>pci 0000:00:1c.3: bridge io port: [0x2000-0x3fff]
>pci 0000:00:1c.3: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
>pci 0000:02:06.0: reg 10 32bit mmio: [0xe8100000-0xe8100fff]
>pci 0000:02:06.0: supports D1 D2
>pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.0: PME# disabled
>pci 0000:02:06.1: reg 10 32bit mmio: [0xe8101000-0xe81017ff]
>pci 0000:02:06.1: reg 14 32bit mmio: [0xe8104000-0xe8107fff]
>pci 0000:02:06.1: supports D1 D2
>pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.1: PME# disabled
>pci 0000:02:06.2: reg 10 32bit mmio: [0xe8108000-0xe8108fff]
>pci 0000:02:06.2: supports D1 D2
>pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.2: PME# disabled
>pci 0000:02:06.3: reg 10 32bit mmio: [0xe8109000-0xe81090ff]
>pci 0000:02:06.3: supports D1 D2
>pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.3: PME# disabled
>pci 0000:02:06.4: reg 10 32bit mmio: [0xe810a000-0xe810afff]
>pci 0000:02:06.4: reg 14 32bit mmio: [0xe810b000-0xe810bfff]
>pci 0000:02:06.4: supports D1 D2
>pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.4: PME# disabled
>pci 0000:02:0e.0: reg 10 32bit mmio: [0xe8110000-0xe811ffff]
>pci 0000:02:0e.0: PME# supported from D3hot D3cold
>pci 0000:02:0e.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xe8100000-0xe83fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C096._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C102._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C115._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C118._PRT]
>ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12A] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12B] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
>ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20081204]
>ACPI: Power Resource [C1F0] (on)
>ACPI: Power Resource [C1FD] (on)
>ACPI: Power Resource [C21A] (on)
>ACPI: Power Resource [C222] (off)
>ACPI: Power Resource [C321] (off)
>ACPI: Power Resource [C322] (off)
>ACPI: Power Resource [C323] (off)
>ACPI: Power Resource [C324] (off)
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
>system 00:0c: ioport range 0x500-0x55f has been reserved
>system 00:0c: ioport range 0x800-0x80f has been reserved
>system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
>system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0d: ioport range 0x1000-0x107f has been reserved
>system 00:0d: ioport range 0x1100-0x113f has been reserved
>system 00:0d: ioport range 0x1200-0x121f has been reserved
>system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
>system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved
>system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
>system 00:0d: iomem range 0xfed90000-0xfed9afff has been reserved
>system 00:0e: iomem range 0xd2800-0xd3fff has been reserved
>system 00:0e: iomem range 0xfeda0000-0xfedbffff has been reserved
>system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0xe8000000-0xe80fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:18
>pci 0000:00:1c.2:   IO window: 0x4000-0x5fff
>pci 0000:00:1c.2:   MEM window: 0xe4000000-0xe7ffffff
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20
>pci 0000:00:1c.3:   IO window: 0x2000-0x3fff
>pci 0000:00:1c.3:   MEM window: 0xe0000000-0xe3ffffff
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:02:06.0: CardBus bridge, secondary bus 0000:21
>pci 0000:02:06.0:   IO window: 0x007000-0x0070ff
>pci 0000:02:06.0:   IO window: 0x007400-0x0074ff
>pci 0000:02:06.0:   PREFETCH window: 0x40000000-0x43ffffff
>pci 0000:02:06.0:   MEM window: 0x44000000-0x47ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0x7000-0x7fff
>pci 0000:00:1e.0:   MEM window: 0xe8100000-0xe83fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000040000000-0x00000043ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:08: resource 0 mem: [0x0-0x0]
>pci_bus 0000:08: resource 1 mem: [0xe8000000-0xe80fffff]
>pci_bus 0000:08: resource 2 mem: [0x0-0x0]
>pci_bus 0000:08: resource 3 mem: [0x0-0x0]
>pci_bus 0000:18: resource 0 io:  [0x4000-0x5fff]
>pci_bus 0000:18: resource 1 mem: [0xe4000000-0xe7ffffff]
>pci_bus 0000:18: resource 2 mem: [0x0-0x0]
>pci_bus 0000:18: resource 3 mem: [0x0-0x0]
>pci_bus 0000:20: resource 0 io:  [0x2000-0x3fff]
>pci_bus 0000:20: resource 1 mem: [0xe0000000-0xe3ffffff]
>pci_bus 0000:20: resource 2 mem: [0x0-0x0]
>pci_bus 0000:20: resource 3 mem: [0x0-0x0]
>pci_bus 0000:02: resource 0 io:  [0x7000-0x7fff]
>pci_bus 0000:02: resource 1 mem: [0xe8100000-0xe83fffff]
>pci_bus 0000:02: resource 2 mem: [0x40000000-0x43ffffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:21: resource 0 io:  [0x7000-0x70ff]
>pci_bus 0000:21: resource 1 io:  [0x7400-0x74ff]
>pci_bus 0000:21: resource 2 mem: [0x40000000-0x43ffffff]
>pci_bus 0000:21: resource 3 mem: [0x44000000-0x47ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1238151669.441:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Hook version: 2.6.29-rc5 2009/02/16
>msgmni has been set to 1746
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1875k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>PNP: PS/2 Controller [PNP0303:C217,PNP0f13:C218] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI No-Shortcut mode
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
>PM: Resume from partition UUID=77ea8c85-a6bf-4a5c-9f7f-81ffbc3d6e11
>PM: Checking hibernation image.
>PM: Error -6 checking image file
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 1:138:25
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 456k freed
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xe8585000 port 0xe8585100 irq 27
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: ATA-7: FUJITSU MHV2080BH PL, 892C, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1.00: configured for UDMA/100
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 892C PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
>ata5.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2
>ata5.00: configured for MWDMA2
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5
>ata6: port disabled. ignoring.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>Uniform Multi-Platform E-IDE driver
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda5: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 277118
>ext3_orphan_cleanup: deleting unreferenced inode 283633
>EXT3-fs: sda5: 2 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>TomoyoLinux Mandatory Access Control disabled by default.
>You need to install ccs-tools if you want to enable it.
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>EXT3 FS on sda5, internal journal
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.11)
>Non-volatile memory driver v1.3
>tifm_7xx1 0000:02:06.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ACPI: SSDT 3F7F5A99, 023D (r1 HP      Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 3F7F5D5B, 04CB (r1 HP      Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3F7F59D1, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 3F7F5CD6, 0085 (r1 HP      Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to TSC halts in idle
>Adding 1050800k swap on /dev/sda6.  Priority:-1 extents:1 across:1050800k 
>yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30aa]
>yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
>yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
>yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a61b22, devctl 0x64
>yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
>yenta_cardbus 0000:02:06.0: Socket status: 30000006
>pci_bus 0000:21: Upper limit for fixing this bridge's parent bridge: #07
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #07
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: clean.
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe83fffff
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
>ACPI: Sleep Button (CM) [C23F]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
>ACPI: Lid Switch [C238]
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ0] (60 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ1] (59 C)
>thermal LNXTHERM:03: registered as thermal_zone2
>ACPI: Thermal Zone [TZ2] (51 C)
>thermal LNXTHERM:04: registered as thermal_zone3
>ACPI: Thermal Zone [TZ3] (29 C)
>thermal LNXTHERM:05: registered as thermal_zone4
>ACPI: Thermal Zone [TZ4] (20 C)
>fan PNP0C0B:00: registered as cooling_device2
>ACPI: Fan [C325] (off)
>fan PNP0C0B:01: registered as cooling_device3
>ACPI: Fan [C326] (off)
>fan PNP0C0B:02: registered as cooling_device4
>ACPI: Fan [C327] (on)
>fan PNP0C0B:03: registered as cooling_device5
>ACPI: Fan [C328] (on)
>ACPI: AC Adapter [C1BA] (on-line)
>acpi device:03: registered as cooling_device6
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
>ACPI: Video Device [C083] (multi-head: yes  rom: no  post: no)
>tpm_inf_pnp 00:04: Found C1FF with ID IFX0102
>tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>parport_pc 00:03: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>rtc_cmos 00:08: RTC can wake from S4
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>ACPI: Battery Slot [C1BC] (battery present)
>ACPI: Battery Slot [C1BB] (battery absent)
>ACPI: WMI: Mapper loaded
>HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>[drm] Initialized drm 1.1.0 20060810
>cfg80211: Using static regulatory domain info
>cfg80211: Regulatory domain: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
>	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
>cfg80211: Calling CRDA for country: US
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
>iwl3945: Copyright(c) 2003-2008 Intel Corporation
>iwl3945 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:08:00.0: setting latency timer to 64
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwl3945: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:08:00.0: PCI INT A disabled
>wmaster0 (iwl3945): not using net_device_ops yet
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>wlan0 (iwl3945): not using net_device_ops yet
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006020
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29-desktop-1mnb uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006040
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29-desktop-1mnb uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.29-desktop-1mnb uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006080
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.29-desktop-1mnb uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8584000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.29-desktop-1mnb ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[e8101000-e81017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0)
>sdhci-pci 0000:02:06.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
>tg3.c:v3.97 (December 10, 2008)
>tg3 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:02:0e.0: PME# disabled
>eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:15:60:ca:1b:74
>eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>usb 5-1: New USB device found, idVendor=0424, idProduct=2503
>usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 5-1: configuration #1 chosen from 1 choice
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 3 ports detected
>intel_rng: FWH not detected
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 31x/31x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>usb 5-1.1: new full speed USB device using ehci_hcd and address 3
>usb 5-1.1: New USB device found, idVendor=03f0, idProduct=171d
>usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-1.1: Product: HP Integrated Module
>usb 5-1.1: Manufacturer: Broadcom Corp
>usb 5-1.1: configuration #1 chosen from 1 choice
>usb 5-1.2: new full speed USB device using ehci_hcd and address 4
>usb 5-1.2: device not accepting address 4, error -32
>usb 5-1.2: new full speed USB device using ehci_hcd and address 5
>usb 5-1.2: New USB device found, idVendor=08ff, idProduct=2580
>usb 5-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 5-1.2: Product: Fingerprint Sensor
>usb 5-1.2: configuration #1 chosen from 1 choice
>ppdev: user-space parallel port driver
>cfg80211: Regulatory domain changed to country: US
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>Bluetooth: Core ver 2.14
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.4
>usbcore: registered new interface driver btusb
>aes2501 probe !
>num_altsetting == 1
>BULK COUNT 2
>BULK IN 0 ; size = 32
>BULK OUT 1
>aes2501: device now attached to aes2501-0
>usbcore: registered new interface driver aes2501
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>Bridge firewalling registered
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=0 offMin=0x420 offMax=0xa8c
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
>tg3 0000:02:0e.0: firmware: requesting tigon/tg3_tso5.bin
>eth0: Failed to load firmware "tigon/tg3_tso5.bin"
>eth0: TSO capability disabled.
>tg3 0000:02:0e.0: PME# disabled
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:08:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
>iwl3945 0000:08:00.0: irq 28 for MSI/MSI-X
>iwl3945 0000:08:00.0: firmware: requesting iwlwifi-3945-2.ucode
>iwl3945 loaded firmware version 15.28.2.8
>Registered led device: iwl-phy0:radio
>Registered led device: iwl-phy0:assoc
>Registered led device: iwl-phy0:RX
>Registered led device: iwl-phy0:TX
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>cfg80211: Calling CRDA for country: US
>wlan0: authenticate with AP 00:1f:ca:83:0c:31
>wlan0: authenticated
>wlan0: associate with AP 00:1f:ca:83:0c:31
>wlan0: associate with AP 00:1f:ca:83:0c:31
>wlan0: RX AssocResp from 00:1f:ca:83:0c:31 (capab=0x421 status=0 aid=5)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>cfg80211: Calling CRDA for country: BE
>cfg80211: Current regulatory domain updated by AP to: BE
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>NET: Registered protocol family 17
>martian source 255.255.255.255 from 1.1.1.1, on dev wlan0
>ll header: 00:13:02:8f:10:79:00:1f:ca:83:0c:30:08:00
>usbcore: registered new interface driver usblp
>ip_tables: (C) 2000-2006 Netfilter Core Team
>wlan0: no IPv6 routers present
>eth0: no IPv6 routers present
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16253 buckets, 65012 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>ClusterIP Version 0.8 loaded successfully
>xt_time: kernel timezone is +0100

Actions: View

Attachments on bug 20864: 24313 | 24316 | 24317 | 24569 | 24570 | 24817 | 24818

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.