Attachment 23819 Details for Bug 20596 – dmesg after suspend

dmesg after suspend

dmesg (text/plain), 46.29 KB, created by liuhaien on 2009-03-12 19:00:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: liuhaien

Created: 2009-03-12 19:00:14 UTC

Size: 46.29 KB

patch

obsolete

>Linux version 2.6.29-rc7-KMS (root@x-gm45a) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #3 SMP Thu Mar 12 11:40:19 CST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000077730000 (usable)
> BIOS-e820: 0000000077730000 - 0000000077740000 (ACPI NVS)
> BIOS-e820: 0000000077740000 - 0000000077746000 (usable)
> BIOS-e820: 0000000077746000 - 0000000077748000 (reserved)
> BIOS-e820: 0000000077748000 - 000000007b4e6000 (usable)
> BIOS-e820: 000000007b4e6000 - 000000007b6e6000 (ACPI NVS)
> BIOS-e820: 000000007b6e6000 - 000000007b993000 (usable)
> BIOS-e820: 000000007b993000 - 000000007b99b000 (reserved)
> BIOS-e820: 000000007b99b000 - 000000007b9bf000 (usable)
> BIOS-e820: 000000007b9bf000 - 000000007b9cf000 (reserved)
> BIOS-e820: 000000007b9cf000 - 000000007bacf000 (ACPI NVS)
> BIOS-e820: 000000007bacf000 - 000000007baff000 (ACPI data)
> BIOS-e820: 000000007baff000 - 000000007bb00000 (usable)
> BIOS-e820: 000000007bb00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
> BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>last_pfn = 0x7bb00 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>RAMDISK: 37c9b000 - 37fefd0a
>Allocated new RAMDISK: 008ef000 - 00c43d0a
>Move RAMDISK from 0000000037c9b000 - 0000000037fefd09 to 008ef000 - 00c43d09
>ACPI: RSDP 000F6910, 0024 (r2 HPQOEM)
>ACPI: XSDT 7BAFE120, 007C (r1 HPQOEM SLIC-MPC        F       1000013)
>ACPI: FACP 7BAFC000, 00F4 (r3 HPQOEM 3037            F HP          1)
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 7BADF000, 17771 (r1 HPQOEM 3037            1 INTL 20060912)
>ACPI: FACS 7BAAE000, 0040
>ACPI: HPET 7BAFB000, 0038 (r1 HPQOEM 3037            1 HP          1)
>ACPI: APIC 7BAFA000, 0084 (r1 HPQOEM 3037            1 HP          1)
>ACPI: MCFG 7BAF9000, 003C (r1 HPQOEM 3037            1 HP          1)
>ACPI: ASF! 7BAF8000, 00A0 (r32 HPQOEM 3037            1 HP          1)
>ACPI: SSDT 7BADC000, 02DD (r1 HPQOEM SataAhci     1000 INTL 20060912)
>ACPI: SLIC 7BADA000, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: DMAR 7BAD9000, 00F8 (r1                       1             0)
>ACPI: SSDT 7BAD8000, 066C (r1  PmRef    CpuPm     3000 INTL 20060912)
>ACPI: SSDT 7BAD7000, 0288 (r1  PmRef  Cpu0Tst     3000 INTL 20060912)
>ACPI: SSDT 7BAD6000, 0225 (r1  PmRef    ApTst     3000 INTL 20060912)
>ACPI: Local APIC address 0xfee00000
>1095MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 00000000 - 373fe000
>  bootmap 00008000 - 0000ee80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 00008ea130]    TEXT DATA BSS ==> [0000400000 - 00008ea130]
>  #4 [00008eb000 - 00008ef000]    INIT_PG_TABLE ==> [00008eb000 - 00008ef000]
>  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #7 [00008ef000 - 0000c43d0a]      NEW RAMDISK ==> [00008ef000 - 0000c43d0a]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0007bb00
>Movable zone start PFN for each node
>early_node_map[7] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x00077730
>    0: 0x00077740 -> 0x00077746
>    0: 0x00077748 -> 0x0007b4e6
>    0: 0x0007b6e6 -> 0x0007b993
>    0: 0x0007b99b -> 0x0007b9bf
>    0: 0x0007baff -> 0x0007bb00
>On node 0 totalpages: 505669
>free_area_init_node: node 0, pgdat c077f580, node_mem_map c1000000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 2191 pages used for memmap
>  HighMem zone: 277273 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
>PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Allocating 40960 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 501710
>Kernel command line: ro root=UUID=cb0be966-b4e4-4182-bb9f-f481e4e68c7f rhgb quiet                             
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0835000 soft=c0815000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2526.970 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1996292k/2026496k available (2293k kernel code, 25396k reserved, 1526k data, 320k init, 1117856k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc58000 - 0xfffff000   (3740 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc07c2000 - 0xc0812000   ( 320 kB)
>      .data : 0xc063d4c5 - 0xc07bad48   (1526 kB)
>      .text : 0xc0400000 - 0xc063d4c5   (2293 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.94 BogoMIPS (lpj=2526970)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20081204
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
>CPU 1 irqstacks, hard=c0836000 soft=c0816000
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5053.72 BogoMIPS (lpj=2526864)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (10107.66 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>net_namespace: 1024 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Time:  1:49:50  Date: 03/13/09
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 64bit mmio: [0x98000000-0x983fffff]
>pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
>pci 0000:00:02.0: reg 20 io port: [0x70f0-0x70f7]
>pci 0000:00:02.1: reg 10 64bit mmio: [0x98400000-0x984fffff]
>pci 0000:00:1a.0: reg 20 io port: [0x70c0-0x70df]
>pci 0000:00:1a.1: reg 20 io port: [0x70a0-0x70bf]
>pci 0000:00:1a.2: reg 20 io port: [0x7080-0x709f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0x98904c00-0x98904fff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0x98900000-0x98903fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x7060-0x707f]
>pci 0000:00:1d.1: reg 20 io port: [0x7040-0x705f]
>pci 0000:00:1d.2: reg 20 io port: [0x7020-0x703f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0x98904800-0x98904bff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.2: reg 10 io port: [0x70e8-0x70ef]
>pci 0000:00:1f.2: reg 14 io port: [0x70fc-0x70ff]
>pci 0000:00:1f.2: reg 18 io port: [0x70e0-0x70e7]
>pci 0000:00:1f.2: reg 1c io port: [0x70f8-0x70fb]
>pci 0000:00:1f.2: reg 20 io port: [0x7000-0x701f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0x98904000-0x989047ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1c.0: bridge 32bit mmio: [0x98800000-0x988fffff]
>pci 0000:02:00.0: reg 10 64bit mmio: [0x98700000-0x98701fff]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.1: bridge 32bit mmio: [0x98700000-0x987fffff]
>pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff]
>pci 0000:00:1c.2: bridge 32bit mmio: [0x94000000-0x97ffffff]
>pci 0000:00:1c.4: bridge io port: [0x3000-0x4fff]
>pci 0000:00:1c.4: bridge 32bit mmio: [0x90000000-0x93ffffff]
>pci 0000:85:00.0: reg 10 64bit mmio: [0x98600000-0x98603fff]
>pci 0000:85:00.0: reg 18 io port: [0x2000-0x20ff]
>pci 0000:85:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
>pci 0000:85:00.0: supports D1 D2
>pci 0000:85:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:85:00.0: PME# disabled
>pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff]
>pci 0000:00:1c.5: bridge 32bit mmio: [0x98600000-0x986fffff]
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0x98500000-0x985fffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: Power Resource [APPR] (off)
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN1] (off)
>ACPI: Power Resource [PFN2] (off)
>ACPI: Power Resource [PFN3] (off)
>ACPI: Power Resource [PFN4] (off)
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
>system 00:04: ioport range 0xfe00-0xfe0f has been reserved
>system 00:04: ioport range 0xfe80-0xfe8f has been reserved
>system 00:04: iomem range 0xfed40000-0xfed44fff has been reserved
>system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:07: ioport range 0x200-0x27f has been reserved
>system 00:07: ioport range 0x1000-0x1003 has been reserved
>system 00:07: ioport range 0x1010-0x101f has been reserved
>system 00:07: ioport range 0xffff-0xffff has been reserved
>system 00:07: ioport range 0x400-0x47f has been reserved
>system 00:07: ioport range 0x500-0x57f has been reserved
>system 00:07: ioport range 0xef80-0xef9f has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0x98800000-0x988fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0x98700000-0x987fffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.2:   IO window: 0x5000-0x6fff
>pci 0000:00:1c.2:   MEM window: 0x94000000-0x97ffffff
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:44
>pci 0000:00:1c.4:   IO window: 0x3000-0x4fff
>pci 0000:00:1c.4:   MEM window: 0x90000000-0x93ffffff
>pci 0000:00:1c.4:   PREFETCH window: disabled
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:85
>pci 0000:00:1c.5:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.5:   MEM window: 0x98600000-0x986fffff
>pci 0000:00:1c.5:   PREFETCH window: 0x00000098a00000-0x00000098afffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:86
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0x98500000-0x985fffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 mem: [0x0-0x0]
>pci_bus 0000:01: resource 1 mem: [0x98800000-0x988fffff]
>pci_bus 0000:01: resource 2 mem: [0x0-0x0]
>pci_bus 0000:01: resource 3 mem: [0x0-0x0]
>pci_bus 0000:02: resource 0 mem: [0x0-0x0]
>pci_bus 0000:02: resource 1 mem: [0x98700000-0x987fffff]
>pci_bus 0000:02: resource 2 mem: [0x0-0x0]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 io:  [0x5000-0x6fff]
>pci_bus 0000:03: resource 1 mem: [0x94000000-0x97ffffff]
>pci_bus 0000:03: resource 2 mem: [0x0-0x0]
>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>pci_bus 0000:44: resource 0 io:  [0x3000-0x4fff]
>pci_bus 0000:44: resource 1 mem: [0x90000000-0x93ffffff]
>pci_bus 0000:44: resource 2 mem: [0x0-0x0]
>pci_bus 0000:44: resource 3 mem: [0x0-0x0]
>pci_bus 0000:85: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:85: resource 1 mem: [0x98600000-0x986fffff]
>pci_bus 0000:85: resource 2 mem: [0x98a00000-0x98afffff]
>pci_bus 0000:85: resource 3 mem: [0x0-0x0]
>pci_bus 0000:86: resource 0 mem: [0x0-0x0]
>pci_bus 0000:86: resource 1 mem: [0x98500000-0x985fffff]
>pci_bus 0000:86: resource 2 mem: [0x0-0x0]
>pci_bus 0000:86: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:86: resource 4 mem: [0x000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3411k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1236908989.480:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1724
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:1c.4: setting latency timer to 64
>pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN0] (off)
>fan PNP0C0B:01: registered as cooling_device1
>ACPI: Fan [FAN1] (off)
>fan PNP0C0B:02: registered as cooling_device2
>ACPI: Fan [FAN2] (off)
>fan PNP0C0B:03: registered as cooling_device3
>ACPI: Fan [FAN3] (off)
>fan PNP0C0B:04: registered as cooling_device4
>ACPI: Fan [FAN4] (off)
>ACPI: SSDT 7B9C6C18, 0275 (r1  PmRef  Cpu0Ist     3000 INTL 20060912)
>ACPI: SSDT 7B9C4618, 057B (r1  PmRef  Cpu0Cst     3001 INTL 20060912)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>processor ACPI_CPU:00: registered as cooling_device5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7B9C5E18, 01D7 (r1  PmRef    ApIst     3000 INTL 20060912)
>ACPI: SSDT 7B9C6F18, 008D (r1  PmRef    ApCst     3000 INTL 20060912)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>processor ACPI_CPU:01: registered as cooling_device6
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [DTSZ] (51 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [CPUZ] (54 C)
>thermal LNXTHERM:03: registered as thermal_zone2
>ACPI: Thermal Zone [SKNZ] (40 C)
>thermal LNXTHERM:04: registered as thermal_zone3
>ACPI: Thermal Zone [BATZ] (30 C)
>thermal LNXTHERM:05: registered as thermal_zone4
>ACPI: Thermal Zone [FDTZ] (33 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel Mobile IntelÂ® GM45 Express Chipset
>agpgart-intel 0000:00:00.0: detected 65532K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 1:846:811
>Marking TSC unstable due to TSC halts in idle
>Freeing unused kernel memory: 320k freed
>Write protecting the kernel text: 2296k
>Write protecting the kernel read-only data: 1120k
>input: AT Translated Set 2 keyboard as /class/input/input1
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98904c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98904800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070c0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x000070a0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x00007080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007060
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x00007040
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007020
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904100 irq 29
>ata2: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904180 irq 29
>ata3: DUMMY
>ata4: DUMMY
>ata5: DUMMY
>ata6: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904380 irq 29
>Clocksource tsc unstable (delta = -371194191 ns)
>Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: ATA-8: TOSHIBA MK1246GSX, LB214C, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1246GS LB21 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
> sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
>ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
>ata6: SATA link down (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1236909004.612:2): selinux=0 auid=4294967295 ses=4294967295
>udevd version 127 started
>ACPI: AC Adapter [AC] (on-line)
>input: Power Button (FF) as /class/input/input3
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>sky2 driver version 1.22
>sky2 0000:85:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sky2 0000:85:00.0: setting latency timer to 64
>sky2 0000:85:00.0: Yukon-2 Extreme chip revision 2
>sky2 0000:85:00.0: Marvell Yukon 88E8072 Gigabit Ethernet Controller
> Part Number: Yukon 88E8072
> Engineering Level: Rev. 1.0
> Manufacturer: Marvell
>sky2 0000:85:00.0: irq 30 for MSI/MSI-X
>sky2 eth0: addr 00:12:34:00:00:03
>input: PC Speaker as /class/input/input6
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:02.0: irq 31 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>i2c-adapter i2c-3: unable to read EDID block.
>pci 0000:00:02.0: DVI-D-2: no EDID data
>[drm] TV-17: set mode NTSC 480i 0
>allocated 1280x800 fb: 0x04020000, bo f62769c0
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 160x50
>[drm] LVDS-8: set mode 1280x800 19
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2048276k swap on /dev/sda3.  Priority:-1 extents:1 across:2048276k 
>platform microcode: firmware: requesting intel-ucode/06-17-06
>platform microcode: firmware: requesting intel-ucode/06-17-06
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>Bluetooth: Core ver 2.14
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>i2c-adapter i2c-3: unable to read EDID block.
>pci 0000:00:02.0: DVI-D-2: no EDID data
>i2c-adapter i2c-3: unable to read EDID block.
>pci 0000:00:02.0: DVI-D-2: no EDID data
>i2c-adapter i2c-3: unable to read EDID block.
>pci 0000:00:02.0: DVI-D-2: no EDID data
>i2c-adapter i2c-3: unable to read EDID block.
>pci 0000:00:02.0: DVI-D-2: no EDID data
>[drm] TMDS-15: set mode 1024x768 1f
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.04 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Entering mem sleep
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>sky2 eth0: disabling interface
>sky2 0000:85:00.0: PME# disabled
>ehci_hcd 0000:00:1d.7: PCI INT D disabled
>ehci_hcd 0000:00:1d.7: PME# disabled
>uhci_hcd 0000:00:1d.2: PCI INT C disabled
>uhci_hcd 0000:00:1d.1: PCI INT B disabled
>uhci_hcd 0000:00:1d.0: PCI INT A disabled
>HDA Intel 0000:00:1b.0: PCI INT A disabled
>HDA Intel 0000:00:1b.0: power state changed by ACPI to D3
>ehci_hcd 0000:00:1a.7: PCI INT D disabled
>ehci_hcd 0000:00:1a.7: PME# disabled
>uhci_hcd 0000:00:1a.2: PCI INT C disabled
>uhci_hcd 0000:00:1a.1: PCI INT B disabled
>uhci_hcd 0000:00:1a.0: PCI INT A disabled
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Breaking affinity for irq 9
>Breaking affinity for irq 12
>Breaking affinity for irq 17
>Breaking affinity for irq 30
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching NULL sched-domain.
>CPU1 is down
>Extended CMOS year: 2000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Extended CMOS year: 2000
>pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>pci 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x70f1)
>pci 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0x8000000c)
>pci 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0x98000004)
>pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900403)
>pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0x98400004)
>pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
>uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x70c1)
>uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x70a1)
>uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
>uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x7081)
>uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x400, writing 0x40a)
>ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0x98904c00)
>ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x98809880)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x98709870)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0x97f09400)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x6050)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x430300)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x93f09000)
>pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x4030)
>pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x844400)
>pcieport-driver 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>pcieport-driver 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>pcieport-driver 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0x98a198a1)
>pcieport-driver 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0x98609860)
>pcieport-driver 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
>pcieport-driver 0000:00:1c.5: restoring config space at offset 0x6 (was 0x0, writing 0x858500)
>pcieport-driver 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pcieport-driver 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x7061)
>uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
>uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x7041)
>uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
>uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x7021)
>uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
>ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40a)
>ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0x98904800)
>ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
>pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
>pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0x98509850)
>pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20000000, writing 0x20868600)
>pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100100, writing 0x100107)
>ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00407)
>pci 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>pci 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x98700004)
>pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
>sky2 0000:85:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>sky2 0000:85:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffe0000)
>sky2 0000:85:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)
>sky2 0000:85:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x98600004)
>sky2 0000:85:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>sky2 0000:85:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c0836000 soft=c0816000
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5053.38 BogoMIPS (lpj=2526693)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>[ds] using Core 2/Atom configuration
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz stepping 06
>CPU0 attaching NULL sched-domain.
>Switched to high resolution mode on CPU 1
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>CPU1 is up
>ACPI: Waking up from system sleep state S3
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>pci 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0x98000004)
>pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900400, writing 0x900403)
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: PME# disabled
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>usb usb4: root hub lost power or was reset
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:1a.7: PME# disabled
>ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: PME# disabled
>HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
>HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.4: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>usb usb6: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>usb usb7: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>usb usb8: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: PME# disabled
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: setting latency timer to 64
>ahci 0000:00:1f.2: setting latency timer to 64
>pci 0000:02:00.0: PME# disabled
>sky2 0000:85:00.0: PME# disabled
>sky2 eth0: enabling interface
>ata6: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata2.00: configured for UDMA/100
>ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
>ata2: irq_stat 0x40000001
>ata2.00: configured for UDMA/100
>ata2: EH complete
>sd 0:0:0:0: [sda] Starting disk
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>ata1.00: configured for UDMA/100
>ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
>ata1: irq_stat 0x00400040, connection status changed
>ata1.00: configured for UDMA/100
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb 4-1: reset full speed USB device using uhci_hcd and address 2
>pci 0000:00:02.0: setting latency timer to 64
>PM: Finishing wakeup.
>Restarting tasks ... done.
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx

Actions: View

Attachments on bug 20596: 23753 | 23754 | 23818 | 23819

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.