Linux version 2.6.29-rc7-KMS (root@x-gm45a) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #3 SMP Thu Mar 12 11:40:19 CST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000077730000 (usable) BIOS-e820: 0000000077730000 - 0000000077740000 (ACPI NVS) BIOS-e820: 0000000077740000 - 0000000077746000 (usable) BIOS-e820: 0000000077746000 - 0000000077748000 (reserved) BIOS-e820: 0000000077748000 - 000000007b4e6000 (usable) BIOS-e820: 000000007b4e6000 - 000000007b6e6000 (ACPI NVS) BIOS-e820: 000000007b6e6000 - 000000007b993000 (usable) BIOS-e820: 000000007b993000 - 000000007b99b000 (reserved) BIOS-e820: 000000007b99b000 - 000000007b9bf000 (usable) BIOS-e820: 000000007b9bf000 - 000000007b9cf000 (reserved) BIOS-e820: 000000007b9cf000 - 000000007bacf000 (ACPI NVS) BIOS-e820: 000000007bacf000 - 000000007baff000 (ACPI data) BIOS-e820: 000000007baff000 - 000000007bb00000 (usable) BIOS-e820: 000000007bb00000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7bb00 max_arch_pfn = 0x100000 kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37c9b000 - 37fefd0a Allocated new RAMDISK: 008ef000 - 00c43d0a Move RAMDISK from 0000000037c9b000 - 0000000037fefd09 to 008ef000 - 00c43d09 ACPI: RSDP 000F6910, 0024 (r2 HPQOEM) ACPI: XSDT 7BAFE120, 007C (r1 HPQOEM SLIC-MPC F 1000013) ACPI: FACP 7BAFC000, 00F4 (r3 HPQOEM 3037 F HP 1) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7BADF000, 17771 (r1 HPQOEM 3037 1 INTL 20060912) ACPI: FACS 7BAAE000, 0040 ACPI: HPET 7BAFB000, 0038 (r1 HPQOEM 3037 1 HP 1) ACPI: APIC 7BAFA000, 0084 (r1 HPQOEM 3037 1 HP 1) ACPI: MCFG 7BAF9000, 003C (r1 HPQOEM 3037 1 HP 1) ACPI: ASF! 7BAF8000, 00A0 (r32 HPQOEM 3037 1 HP 1) ACPI: SSDT 7BADC000, 02DD (r1 HPQOEM SataAhci 1000 INTL 20060912) ACPI: SLIC 7BADA000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: DMAR 7BAD9000, 00F8 (r1  1 0) ACPI: SSDT 7BAD8000, 066C (r1 PmRef CpuPm 3000 INTL 20060912) ACPI: SSDT 7BAD7000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912) ACPI: SSDT 7BAD6000, 0225 (r1 PmRef ApTst 3000 INTL 20060912) ACPI: Local APIC address 0xfee00000 1095MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 00000000 - 373fe000 bootmap 00008000 - 0000ee80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 00008ea130] TEXT DATA BSS ==> [0000400000 - 00008ea130] #4 [00008eb000 - 00008ef000] INIT_PG_TABLE ==> [00008eb000 - 00008ef000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [00008ef000 - 0000c43d0a] NEW RAMDISK ==> [00008ef000 - 0000c43d0a] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0007bb00 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00077730 0: 0x00077740 -> 0x00077746 0: 0x00077748 -> 0x0007b4e6 0: 0x0007b6e6 -> 0x0007b993 0: 0x0007b99b -> 0x0007b9bf 0: 0x0007baff -> 0x0007bb00 On node 0 totalpages: 505669 free_area_init_node: node 0, pgdat c077f580, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 2191 pages used for memmap HighMem zone: 277273 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000 PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Allocating 40960 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501710 Kernel command line: ro root=UUID=cb0be966-b4e4-4182-bb9f-f481e4e68c7f rhgb quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0835000 soft=c0815000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2526.970 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1996292k/2026496k available (2293k kernel code, 25396k reserved, 1526k data, 320k init, 1117856k highmem) virtual kernel memory layout: fixmap : 0xffc58000 - 0xfffff000 (3740 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc07c2000 - 0xc0812000 ( 320 kB) .data : 0xc063d4c5 - 0xc07bad48 (1526 kB) .text : 0xc0400000 - 0xc063d4c5 (2293 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.94 BogoMIPS (lpj=2526970) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20081204 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 CPU 1 irqstacks, hard=c0836000 soft=c0816000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5053.72 BogoMIPS (lpj=2526864) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10107.66 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1024 bytes HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. Time: 1:49:50 Date: 03/13/09 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0x98000000-0x983fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff] pci 0000:00:02.0: reg 20 io port: [0x70f0-0x70f7] pci 0000:00:02.1: reg 10 64bit mmio: [0x98400000-0x984fffff] pci 0000:00:1a.0: reg 20 io port: [0x70c0-0x70df] pci 0000:00:1a.1: reg 20 io port: [0x70a0-0x70bf] pci 0000:00:1a.2: reg 20 io port: [0x7080-0x709f] pci 0000:00:1a.7: reg 10 32bit mmio: [0x98904c00-0x98904fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0x98900000-0x98903fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x7060-0x707f] pci 0000:00:1d.1: reg 20 io port: [0x7040-0x705f] pci 0000:00:1d.2: reg 20 io port: [0x7020-0x703f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x98904800-0x98904bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x70e8-0x70ef] pci 0000:00:1f.2: reg 14 io port: [0x70fc-0x70ff] pci 0000:00:1f.2: reg 18 io port: [0x70e0-0x70e7] pci 0000:00:1f.2: reg 1c io port: [0x70f8-0x70fb] pci 0000:00:1f.2: reg 20 io port: [0x7000-0x701f] pci 0000:00:1f.2: reg 24 32bit mmio: [0x98904000-0x989047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1c.0: bridge 32bit mmio: [0x98800000-0x988fffff] pci 0000:02:00.0: reg 10 64bit mmio: [0x98700000-0x98701fff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0x98700000-0x987fffff] pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff] pci 0000:00:1c.2: bridge 32bit mmio: [0x94000000-0x97ffffff] pci 0000:00:1c.4: bridge io port: [0x3000-0x4fff] pci 0000:00:1c.4: bridge 32bit mmio: [0x90000000-0x93ffffff] pci 0000:85:00.0: reg 10 64bit mmio: [0x98600000-0x98603fff] pci 0000:85:00.0: reg 18 io port: [0x2000-0x20ff] pci 0000:85:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] pci 0000:85:00.0: supports D1 D2 pci 0000:85:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:85:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.5: bridge 32bit mmio: [0x98600000-0x986fffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0x98500000-0x985fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: Power Resource [APPR] (off) ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) ACPI: Power Resource [PFN2] (off) ACPI: Power Resource [PFN3] (off) ACPI: Power Resource [PFN4] (off) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:04: ioport range 0xfe00-0xfe0f has been reserved system 00:04: ioport range 0xfe80-0xfe8f has been reserved system 00:04: iomem range 0xfed40000-0xfed44fff has been reserved system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved system 00:07: ioport range 0x200-0x27f has been reserved system 00:07: ioport range 0x1000-0x1003 has been reserved system 00:07: ioport range 0x1010-0x101f has been reserved system 00:07: ioport range 0xffff-0xffff has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x500-0x57f has been reserved system 00:07: ioport range 0xef80-0xef9f has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0x98800000-0x988fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0x98700000-0x987fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x5000-0x6fff pci 0000:00:1c.2: MEM window: 0x94000000-0x97ffffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:44 pci 0000:00:1c.4: IO window: 0x3000-0x4fff pci 0000:00:1c.4: MEM window: 0x90000000-0x93ffffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:85 pci 0000:00:1c.5: IO window: 0x2000-0x2fff pci 0000:00:1c.5: MEM window: 0x98600000-0x986fffff pci 0000:00:1c.5: PREFETCH window: 0x00000098a00000-0x00000098afffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:86 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0x98500000-0x985fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 mem: [0x0-0x0] pci_bus 0000:01: resource 1 mem: [0x98800000-0x988fffff] pci_bus 0000:01: resource 2 mem: [0x0-0x0] pci_bus 0000:01: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 mem: [0x0-0x0] pci_bus 0000:02: resource 1 mem: [0x98700000-0x987fffff] pci_bus 0000:02: resource 2 mem: [0x0-0x0] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 io: [0x5000-0x6fff] pci_bus 0000:03: resource 1 mem: [0x94000000-0x97ffffff] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:44: resource 0 io: [0x3000-0x4fff] pci_bus 0000:44: resource 1 mem: [0x90000000-0x93ffffff] pci_bus 0000:44: resource 2 mem: [0x0-0x0] pci_bus 0000:44: resource 3 mem: [0x0-0x0] pci_bus 0000:85: resource 0 io: [0x2000-0x2fff] pci_bus 0000:85: resource 1 mem: [0x98600000-0x986fffff] pci_bus 0000:85: resource 2 mem: [0x98a00000-0x98afffff] pci_bus 0000:85: resource 3 mem: [0x0-0x0] pci_bus 0000:86: resource 0 mem: [0x0-0x0] pci_bus 0000:86: resource 1 mem: [0x98500000-0x985fffff] pci_bus 0000:86: resource 2 mem: [0x0-0x0] pci_bus 0000:86: resource 3 io: [0x00-0xffff] pci_bus 0000:86: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3411k freed apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1236908989.480:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1724 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN0] (off) fan PNP0C0B:01: registered as cooling_device1 ACPI: Fan [FAN1] (off) fan PNP0C0B:02: registered as cooling_device2 ACPI: Fan [FAN2] (off) fan PNP0C0B:03: registered as cooling_device3 ACPI: Fan [FAN3] (off) fan PNP0C0B:04: registered as cooling_device4 ACPI: Fan [FAN4] (off) ACPI: SSDT 7B9C6C18, 0275 (r1 PmRef Cpu0Ist 3000 INTL 20060912) ACPI: SSDT 7B9C4618, 057B (r1 PmRef Cpu0Cst 3001 INTL 20060912) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7B9C5E18, 01D7 (r1 PmRef ApIst 3000 INTL 20060912) ACPI: SSDT 7B9C6F18, 008D (r1 PmRef ApCst 3000 INTL 20060912) ACPI: CPU1 (power states: C1[C1] C2[C2]) processor ACPI_CPU:01: registered as cooling_device6 ACPI: Processor [CPU1] (supports 8 throttling states) Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [DTSZ] (51 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [CPUZ] (54 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [SKNZ] (40 C) thermal LNXTHERM:04: registered as thermal_zone3 ACPI: Thermal Zone [BATZ] (30 C) thermal LNXTHERM:05: registered as thermal_zone4 ACPI: Thermal Zone [FDTZ] (33 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12b Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset agpgart-intel 0000:00:00.0: detected 65532K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 1:846:811 Marking TSC unstable due to TSC halts in idle Freeing unused kernel memory: 320k freed Write protecting the kernel text: 2296k Write protecting the kernel read-only data: 1120k input: AT Translated Set 2 keyboard as /class/input/input1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98904c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98904800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070c0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x000070a0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x00007080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007060 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00007040 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007020 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904100 irq 29 ata2: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904180 irq 29 ata3: DUMMY ata4: DUMMY ata5: DUMMY ata6: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904380 irq 29 Clocksource tsc unstable (delta = -371194191 ns) Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: TOSHIBA MK1246GSX, LB214C, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1246GS LB21 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>input: SynPS/2 Synaptics TouchPad as /class/input/input2 sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100 ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH03 PQ: 0 ANSI: 5 ata6: SATA link down (SStatus 0 SControl 300) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1236909004.612:2): selinux=0 auid=4294967295 ses=4294967295 udevd version 127 started ACPI: AC Adapter [AC] (on-line) input: Power Button (FF) as /class/input/input3 ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID] sky2 driver version 1.22 sky2 0000:85:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sky2 0000:85:00.0: setting latency timer to 64 sky2 0000:85:00.0: Yukon-2 Extreme chip revision 2 sky2 0000:85:00.0: Marvell Yukon 88E8072 Gigabit Ethernet Controller Part Number: Yukon 88E8072 Engineering Level: Rev. 1.0 Manufacturer: Marvell sky2 0000:85:00.0: irq 30 for MSI/MSI-X sky2 eth0: addr 00:12:34:00:00:03 input: PC Speaker as /class/input/input6 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 31 for MSI/MSI-X HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 i2c-adapter i2c-3: unable to read EDID block. pci 0000:00:02.0: DVI-D-2: no EDID data [drm] TV-17: set mode NTSC 480i 0 allocated 1280x800 fb: 0x04020000, bo f62769c0 fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x50 [drm] LVDS-8: set mode 1280x800 19 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 on minor 0 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k platform microcode: firmware: requesting intel-ucode/06-17-06 platform microcode: firmware: requesting intel-ucode/06-17-06 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. NET: Registered protocol family 10 lo: Disabled Privacy Extensions RPC: Registered udp transport module. RPC: Registered tcp transport module. Bluetooth: Core ver 2.14 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present i2c-adapter i2c-3: unable to read EDID block. pci 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-3: unable to read EDID block. pci 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-3: unable to read EDID block. pci 0000:00:02.0: DVI-D-2: no EDID data i2c-adapter i2c-3: unable to read EDID block. pci 0000:00:02.0: DVI-D-2: no EDID data [drm] TMDS-15: set mode 1024x768 1f PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.04 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk sky2 eth0: disabling interface sky2 0000:85:00.0: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A disabled HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Breaking affinity for irq 9 Breaking affinity for irq 12 Breaking affinity for irq 17 Breaking affinity for irq 30 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! Extended CMOS year: 2000 pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) pci 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x70f1) pci 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0x8000000c) pci 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0x98000004) pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900403) pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0x98400004) pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x70c1) uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x70a1) uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30a) uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x7081) uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x400, writing 0x40a) ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0x98904c00) ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x98809880) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x98709870) pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30a) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0x97f09400) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x6050) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x430300) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10a) pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0x93f09000) pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x4030) pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x844400) pcieport-driver 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) pcieport-driver 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x20b) pcieport-driver 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0x98a198a1) pcieport-driver 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0x98609860) pcieport-driver 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) pcieport-driver 0000:00:1c.5: restoring config space at offset 0x6 (was 0x0, writing 0x858500) pcieport-driver 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) pcieport-driver 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x7061) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x7041) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30a) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x7021) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40a) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0x98904800) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff) pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0x98509850) pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20000000, writing 0x20868600) pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100100, writing 0x100107) ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00407) pci 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) pci 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x98700004) pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) sky2 0000:85:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) sky2 0000:85:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffe0000) sky2 0000:85:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) sky2 0000:85:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x98600004) sky2 0000:85:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) sky2 0000:85:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) Enabling non-boot CPUs ... SMP alternatives: switching to SMP code CPU 1 irqstacks, hard=c0836000 soft=c0816000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5053.38 BogoMIPS (lpj=2526693) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K [ds] using Core 2/Atom configuration CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up ACPI: Waking up from system sleep state S3 ACPI: EC: non-query interrupt received, switching to interrupt mode pci 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0x98000004) pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900400, writing 0x900403) pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: PME# disabled uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.5: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb7: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb8: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 pci 0000:02:00.0: PME# disabled sky2 0000:85:00.0: PME# disabled sky2 eth0: enabling interface ata6: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata2.00: configured for UDMA/100 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/100 ata2: EH complete sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb 4-1: reset full speed USB device using uhci_hcd and address 2 pci 0000:00:02.0: setting latency timer to 64 PM: Finishing wakeup. Restarting tasks ... done. sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx