Attachment 21160 Details for Bug 19083 – dmesg log from boot

dmesg log from boot

dmesg.log (text/plain), 29.23 KB, created by Ulhume on 2008-12-15 00:30:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ulhume

Created: 2008-12-15 00:30:10 UTC

Size: 29.23 KB

patch

obsolete

>Linux version 2.6.27.5-desktop-2mnb (qateam@titan.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Thu Nov 20 15:20:32 EST 2008
>PAT WC disabled due to known CPU erratum.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f660000 (usable)
> BIOS-e820: 000000003f660000 - 000000003f66d000 (ACPI data)
> BIOS-e820: 000000003f66d000 - 000000003f700000 (ACPI NVS)
> BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>last_pfn = 0x3f660 max_arch_pfn = 0x100000
>kernel direct mapping tables up to 38000000 @ 7000-c000
>RAMDISK: 37c53000 - 37fef205
>DMI 2.4 present.
>ACPI: RSDP 000F5BD0, 0014 (r0 FUJ   )
>ACPI: RSDT 3F6671CC, 0048 (r1 FUJ    PC        1060000 FUJ       100)
>ACPI: FACP 3F66CF8C, 0074 (r1 FUJ    PC        1060000 FUJ       100)
>ACPI: DSDT 3F66721C, 4F54 (r1 FUJ    FJNB1D6   1060000 MSFT  100000E)
>ACPI: FACS 3F66DFC0, 0040
>ACPI: MCFG 3F66C170, 003C (r1 FUJ    FJNB1D6   1060000 FUJ       100)
>ACPI: SSDT 3F66C1AC, 04DC (r1 FUJ    FJNB1D6   1060000 INTL 20050624)
>ACPI: SSDT 3F66C688, 0164 (r1 FUJ    FJNB1D6   1060000 INTL 20050624)
>ACPI: SSDT 3F66CB07, 01D0 (r1 FUJ    FJNB1D6   1060000 INTL 20050624)
>ACPI: APIC 3F66CD5C, 005A (r1 FUJ    FJNB1D6   1060000  LTP        0)
>ACPI: HPET 3F66CDB6, 0038 (r1 FUJ    FJNB1D6   1060000 FUJ       100)
>ACPI: BOOT 3F66CDEE, 0028 (r1 FUJ    FJNB1D6   1060000 FUJ       100)
>ACPI: SLIC 3F66CE16, 0176 (r1 FUJ    PC        1060000 FUJ       100)
>118MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00008000 - 0000f000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 0000590800]    TEXT DATA BSS ==> [0000100000 - 0000590800]
>  #4 [0037c53000 - 0037fef205]          RAMDISK ==> [0037c53000 - 0037fef205]
>  #5 [0000591000 - 0000594000]    INIT_PG_TABLE ==> [0000591000 - 0000594000]
>  #6 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x0003f660
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003f660
>On node 0 totalpages: 259583
>free_area_init_node: node 0, pgdat c049b000, node_mem_map c1000000
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 30067 pages, LIFO batch:7
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
>PERCPU: Allocating 40988 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257554
>Kernel command line: BOOT_IMAGE=linux root=UUID=a7160e22-c75b-4302-afe5-fc6a8b713dbd resume=UUID=f1c0ddf3-70d0-4940-9fa6-b156243b3ada pnpbios=off pnpacpi=off vga=788 init=/sbin/bootchartd
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 797.978 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1020536k/1038720k available (2576k kernel code, 17400k reserved, 1205k data, 364k init, 121216k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc04b8000 - 0xc0513000   ( 364 kB)
>      .data : 0xc0384326 - 0xc04b1a00   (1205 kB)
>      .text : 0xc0100000 - 0xc0384326   (2576 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.95 BogoMIPS (lpj=797978)
>Security Framework initialized
>AppArmor: AppArmor disabled by boottime parameter 
>Mount-cache hash table entries: 512
>Hook version: 2.6.27-2.3 2008/08/29
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 512K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>Early unpacking initramfs... done
>Freeing initrd memory: 3696k freed
>ACPI: Core revision 20080609
>ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel Genuine Intel(R) processor               800MHz stepping 08
>APIC calibration not consistent with PM Timer: 177ms instead of 100ms
>APIC delta adjusted to PM-Timer: 623432 (1109700)
>Brought up 1 CPUs
>Total of 1 processors activated (1595.95 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0 level CPU
>  groups: 0
>net_namespace: 840 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 3F66D67A, 07DC (r1 FUJ    FJNB1D6   1060000 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>PCI: 0000:00:02.0 reg 10 32bit mmio: [f0200000, f027ffff]
>PCI: 0000:00:02.0 reg 14 io port: [1800, 1807]
>PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff]
>PCI: 0000:00:02.0 reg 1c 32bit mmio: [f0300000, f033ffff]
>PCI: 0000:00:02.1 reg 10 32bit mmio: [f0280000, f02fffff]
>PCI: 0000:00:1b.0 reg 10 64bit mmio: [f0340000, f0343fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
>PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
>PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
>PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [f0544000, f05443ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
>PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
>PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
>PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
>PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
>PCI: 0000:00:1f.3 reg 20 io port: [18a0, 18bf]
>PCI: 0000:01:00.0 reg 10 64bit mmio: [f0000000, f000ffff]
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:01.0 32bit mmio: [f0000000, f00fffff]
>PCI: 0000:08:03.0 reg 10 32bit mmio: [0, fff]
>pci 0000:08:03.0: supports D1
>pci 0000:08:03.0: supports D2
>pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:03.0: PME# disabled
>PCI: 0000:08:03.2 reg 10 32bit mmio: [f0100000, f01000ff]
>pci 0000:08:03.2: supports D1
>pci 0000:08:03.2: supports D2
>pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:03.2: PME# disabled
>PCI: 0000:08:04.0 reg 10 io port: [f800, f8ff]
>PCI: 0000:08:04.0 reg 14 32bit mmio: [f0100400, f01004ff]
>pci 0000:08:04.0: supports D1
>pci 0000:08:04.0: supports D2
>pci 0000:08:04.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:08:04.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 io port: [2000, 2fff]
>PCI: bridge 0000:00:1e.0 32bit mmio: [f0100000, f01fffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>PnPBIOS: Disabled
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: 0xf0000000-0xf00fffff
>pci 0000:00:01.0:   PREFETCH window: disabled
>pci 0000:08:03.0: CardBus bridge, secondary bus 0000:09
>pci 0000:08:03.0:   IO window: 0x002000-0x0020ff
>pci 0000:08:03.0:   IO window: 0x002400-0x0024ff
>pci 0000:08:03.0:   PREFETCH window: 0x50000000-0x53ffffff
>pci 0000:08:03.0:   MEM window: 0x54000000-0x57ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1e.0:   MEM window: 0xf0100000-0xf01fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000053ffffff
>pci 0000:00:01.0: enabling device (0000 -> 0002)
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:08:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 mmio: [0, 0]
>bus: 01 index 1 mmio: [f0000000, f00fffff]
>bus: 01 index 2 mmio: [0, 0]
>bus: 01 index 3 mmio: [0, 0]
>bus: 08 index 0 io port: [2000, 2fff]
>bus: 08 index 1 mmio: [f0100000, f01fffff]
>bus: 08 index 2 mmio: [50000000, 53ffffff]
>bus: 08 index 3 io port: [0, ffff]
>bus: 08 index 4 mmio: [0, ffffffffffffffff]
>bus: 09 index 0 io port: [2000, 20ff]
>bus: 09 index 1 io port: [2400, 24ff]
>bus: 09 index 2 mmio: [50000000, 53ffffff]
>bus: 09 index 3 mmio: [54000000, 57ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Simple Boot Flag at 0x7b set to 0x1
>platform rtc_cmos: registered platform RTC device (no PNP device found)
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1229329293.460:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1764
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 1875k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>brd: module loaded
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI No-Shortcut mode
>registered taskstats version 1
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 364k freed
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>No dock devices found.
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>input: PS/2 Generic Mouse as /class/input/input0
>ata1.00: ATA-7: TOSHIBA MK6028GAL, BN101F, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6028GA BN10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>input: AT Translated Set 2 keyboard as /class/input/input1
> sda1 sda2 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>TomoyoLinux Mandatory Access Control disabled by default.
>You need to install ccs-tools if you want to enable it.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>fsc_btns: found: Unknown (using defaults)
>input: fsc tablet buttons as /class/input/input2
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: AC Adapter [AC] (on-line)
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>Linux agpgart interface v0.103
>ACPI: Battery Slot [CMB1] (battery present)
>acpi device:03: registered as cooling_device1
>input: Video Bus as /class/input/input6
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>Marking TSC unstable due to TSC halts in idle
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>intel_rng: FWH not detected
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>8139too Fast Ethernet driver 0.9.28
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.5-desktop-2mnb uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=08ff, idProduct=2580
>usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-2: Product: Fingerprint Sensor
>ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.5-desktop-2mnb uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=0430, idProduct=0530
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB Touch Panel
>usb 2-1: Manufacturer: Fujitsu Component
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27.5-desktop-2mnb uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>input: Fujitsu FUJ02B1 as /class/input/input7
>ACPI: Fujitsu FUJ02B1 [FJEX] (on)
>ACPI: Fujitsu FUJ02E3 [FEXT] (on)
>Registered led device: kbd_light
>fujitsu-laptop: driver 0.4.2E successfully loaded.
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=05ca, idProduct=1841
>usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27.5-desktop-2mnb uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (27 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (27 C)
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0544000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 3-2: unable to read config index 0 descriptor/all
>usb 3-2: can't read configurations, error -71
>rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, hpet irqs
>apanel: Unknown symbol input_allocate_polled_device
>apanel: Unknown symbol input_free_polled_device
>apanel: Unknown symbol input_register_polled_device
>apanel: Unknown symbol input_unregister_polled_device
>hub 3-0:1.0: unable to enumerate USB device on port 2
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27.5-desktop-2mnb ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>8139too 0000:08:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>eth0: RealTek RTL8139 at 0xf8be6400, 00:17:42:bf:37:23, IRQ 22
>eth0:  Identified 8139 chip type 'RTL-8101'
>Yenta: CardBus bridge found at 0000:08:03.0 [10cf:131e]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>Yenta: ISA IRQ mask 0x0c98, PCI irq 23
>Socket status: 30000810
>Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>cs: IO port probe 0x2000-0x2fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf0100000 - 0xf01fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>sdhci-pci 0000:08:03.2: SDHCI controller found [1217:7120] (rev 0)
>sdhci-pci 0000:08:03.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>mmc0: Unknown controller version (16). You may experience problems.
>mmc0: SDHCI controller on PCI [0000:08:03.2] using PIO
>ndiswrapper: driver net5211 (,03/23/2006,4.2.2.14) loaded
>ndiswrapper 0000:01:00.0: enabling device (0000 -> 0002)
>ndiswrapper 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ndiswrapper 0000:01:00.0: setting latency timer to 64
>ndiswrapper: using IRQ 16
>usb 5-5: new high speed USB device using ehci_hcd and address 4
>usb 5-5: configuration #1 chosen from 1 choice
>usb 5-5: New USB device found, idVendor=05ca, idProduct=1841
>usb 5-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 5-8: new high speed USB device using ehci_hcd and address 6
>usb 5-8: configuration #1 chosen from 1 choice
>hub 5-8:1.0: USB hub found
>hub 5-8:1.0: 4 ports detected
>usb 5-8: New USB device found, idVendor=0409, idProduct=005a
>usb 5-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usbcore: registered new interface driver hiddev
>usb 1-2: USB disconnect, address 2
>Linux video capture interface: v2.00
>pccard: PCMCIA card inserted into slot 0
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>wlan0: ethernet device 00:21:63:03:21:5c using serialized NDIS driver: net5211, version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:001C.5.conf
>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=08ff, idProduct=2580
>usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-2: Product: Fingerprint Sensor
>usb 2-1: USB disconnect, address 2
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=0430, idProduct=0530
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB Touch Panel
>usb 2-1: Manufacturer: Fujitsu Component
>usb 3-1: USB disconnect, address 2
>cs: memory probe 0xf0100000-0xf01fffff: excluding 0xf0100000-0xf010ffff
>pcmcia: registering new device pcmcia0.0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>usb 3-2: new full speed USB device using uhci_hcd and address 5
>usb 3-2: configuration #1 chosen from 1 choice
>usb 3-2: New USB device found, idVendor=0c24, idProduct=000f
>usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hiddev0hidraw0: USB HID v1.00 Device [Fujitsu Component USB Touch Panel] on usb-0000:00:1d.1-1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>usbcore: registered new interface driver ndiswrapper
>ndiswrapper: changing interface name from 'wlan0' to 'ath0'
>udev: renamed network interface wlan0 to ath0
>usbcore: registered new interface driver usb_u810_tablet
>u810_tablet: v0.1:Fujitsu U810 tablet driver
>Bluetooth: Core ver 2.13
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>scsi2 : pata_pcmcia
>ata3: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 3
>Bluetooth: Generic Bluetooth USB driver ver 0.3
>usbcore: registered new interface driver btusb
>ata3.00: CFA: InnoDisk Corp. - iCF4000 2GB, 06/05/18, max UDMA/66
>ata3.00: 4095504 sectors, multi 2: LBA 
>ata3.00: configured for PIO0
>isa bounce pool size: 16 pages
>scsi 2:0:0:0: Direct-Access     ATA      InnoDisk Corp. - 06/0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 4095504 512-byte hardware sectors (2097 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 4095504 512-byte hardware sectors (2097 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>Uniform Multi-Platform E-IDE driver
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>Non-volatile memory driver v1.2
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide_generic: I/O resource 0x1F0-0x1F7 not free.
>ide_generic: I/O resource 0x170-0x177 not free.
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>loop: module loaded
>Adding 4088500k swap on /dev/sda5.  Priority:-1 extents:1 across:4088500k
>usbcore: deregistering interface driver usbhid
>usbcore: deregistering interface driver hiddev
>usbcore: deregistering interface driver usb_u810_tablet
>input: Fujitsu Component USB Touch Panel as /class/input/input8
>usbcore: registered new interface driver usb_u810_tablet
>u810_tablet: v0.1:Fujitsu U810 tablet driver
>Clocksource tsc unstable (delta = -86788277 ns)
>NET: Registered protocol family 17
>eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>[drm:i915_getparam] *ERROR* Unknown parameter 5
>padlock: VIA PadLock not detected.
>padlock: VIA PadLock Hash Engine not detected.
>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

Actions: View

Attachments on bug 19083: 21155 | 21156 | 21157 | 21158 | 21159 | 21160

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.