Linux version 2.6.27.5-desktop-2mnb (qateam@titan.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Thu Nov 20 15:20:32 EST 2008 PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f660000 (usable) BIOS-e820: 000000003f660000 - 000000003f66d000 (ACPI data) BIOS-e820: 000000003f66d000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) last_pfn = 0x3f660 max_arch_pfn = 0x100000 kernel direct mapping tables up to 38000000 @ 7000-c000 RAMDISK: 37c53000 - 37fef205 DMI 2.4 present. ACPI: RSDP 000F5BD0, 0014 (r0 FUJ ) ACPI: RSDT 3F6671CC, 0048 (r1 FUJ PC 1060000 FUJ 100) ACPI: FACP 3F66CF8C, 0074 (r1 FUJ PC 1060000 FUJ 100) ACPI: DSDT 3F66721C, 4F54 (r1 FUJ FJNB1D6 1060000 MSFT 100000E) ACPI: FACS 3F66DFC0, 0040 ACPI: MCFG 3F66C170, 003C (r1 FUJ FJNB1D6 1060000 FUJ 100) ACPI: SSDT 3F66C1AC, 04DC (r1 FUJ FJNB1D6 1060000 INTL 20050624) ACPI: SSDT 3F66C688, 0164 (r1 FUJ FJNB1D6 1060000 INTL 20050624) ACPI: SSDT 3F66CB07, 01D0 (r1 FUJ FJNB1D6 1060000 INTL 20050624) ACPI: APIC 3F66CD5C, 005A (r1 FUJ FJNB1D6 1060000 LTP 0) ACPI: HPET 3F66CDB6, 0038 (r1 FUJ FJNB1D6 1060000 FUJ 100) ACPI: BOOT 3F66CDEE, 0028 (r1 FUJ FJNB1D6 1060000 FUJ 100) ACPI: SLIC 3F66CE16, 0176 (r1 FUJ PC 1060000 FUJ 100) 118MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000590800] TEXT DATA BSS ==> [0000100000 - 0000590800] #4 [0037c53000 - 0037fef205] RAMDISK ==> [0037c53000 - 0037fef205] #5 [0000591000 - 0000594000] INIT_PG_TABLE ==> [0000591000 - 0000594000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0003f660 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003f660 On node 0 totalpages: 259583 free_area_init_node: node 0, pgdat c049b000, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 30067 pages, LIFO batch:7 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000) PERCPU: Allocating 40988 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257554 Kernel command line: BOOT_IMAGE=linux root=UUID=a7160e22-c75b-4302-afe5-fc6a8b713dbd resume=UUID=f1c0ddf3-70d0-4940-9fa6-b156243b3ada pnpbios=off pnpacpi=off vga=788 init=/sbin/bootchartd Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 797.978 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1020536k/1038720k available (2576k kernel code, 17400k reserved, 1205k data, 364k init, 121216k highmem) virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04b8000 - 0xc0513000 ( 364 kB) .data : 0xc0384326 - 0xc04b1a00 (1205 kB) .text : 0xc0100000 - 0xc0384326 (2576 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 1595.95 BogoMIPS (lpj=797978) Security Framework initialized AppArmor: AppArmor disabled by boottime parameter Mount-cache hash table entries: 512 Hook version: 2.6.27-2.3 2008/08/29 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed Early unpacking initramfs... done Freeing initrd memory: 3696k freed ACPI: Core revision 20080609 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Genuine Intel(R) processor 800MHz stepping 08 APIC calibration not consistent with PM Timer: 177ms instead of 100ms APIC delta adjusted to PM-Timer: 623432 (1109700) Brought up 1 CPUs Total of 1 processors activated (1595.95 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: SSDT 3F66D67A, 07DC (r1 FUJ FJNB1D6 1060000 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:02.0 reg 10 32bit mmio: [f0200000, f027ffff] PCI: 0000:00:02.0 reg 14 io port: [1800, 1807] PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff] PCI: 0000:00:02.0 reg 1c 32bit mmio: [f0300000, f033ffff] PCI: 0000:00:02.1 reg 10 32bit mmio: [f0280000, f02fffff] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f0340000, f0343fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f] PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f] PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f] PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f0544000, f05443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f] PCI: 0000:00:1f.3 reg 20 io port: [18a0, 18bf] PCI: 0000:01:00.0 reg 10 64bit mmio: [f0000000, f000ffff] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:01.0 32bit mmio: [f0000000, f00fffff] PCI: 0000:08:03.0 reg 10 32bit mmio: [0, fff] pci 0000:08:03.0: supports D1 pci 0000:08:03.0: supports D2 pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:03.0: PME# disabled PCI: 0000:08:03.2 reg 10 32bit mmio: [f0100000, f01000ff] pci 0000:08:03.2: supports D1 pci 0000:08:03.2: supports D2 pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:03.2: PME# disabled PCI: 0000:08:04.0 reg 10 io port: [f800, f8ff] PCI: 0000:08:04.0 reg 14 32bit mmio: [f0100400, f01004ff] pci 0000:08:04.0: supports D1 pci 0000:08:04.0: supports D2 pci 0000:08:04.0: PME# supported from D1 D2 D3hot D3cold pci 0000:08:04.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [2000, 2fff] PCI: bridge 0000:00:1e.0 32bit mmio: [f0100000, f01fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Disabled PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xf0000000-0xf00fffff pci 0000:00:01.0: PREFETCH window: disabled pci 0000:08:03.0: CardBus bridge, secondary bus 0000:09 pci 0000:08:03.0: IO window: 0x002000-0x0020ff pci 0000:08:03.0: IO window: 0x002400-0x0024ff pci 0000:08:03.0: PREFETCH window: 0x50000000-0x53ffffff pci 0000:08:03.0: MEM window: 0x54000000-0x57ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xf0100000-0xf01fffff pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff pci 0000:00:01.0: enabling device (0000 -> 0002) pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:08:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [f0000000, f00fffff] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] bus: 08 index 0 io port: [2000, 2fff] bus: 08 index 1 mmio: [f0100000, f01fffff] bus: 08 index 2 mmio: [50000000, 53ffffff] bus: 08 index 3 io port: [0, ffff] bus: 08 index 4 mmio: [0, ffffffffffffffff] bus: 09 index 0 io port: [2000, 20ff] bus: 09 index 1 io port: [2400, 24ff] bus: 09 index 2 mmio: [50000000, 53ffffff] bus: 09 index 3 mmio: [54000000, 57ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x7b set to 0x1 platform rtc_cmos: registered platform RTC device (no PNP device found) apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1229329293.460:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1764 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 1875k, total 7872k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded PNP: No PS/2 controller found. Probing ports directly. i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 364k freed SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 input: PS/2 Generic Mouse as /class/input/input0 ata1.00: ATA-7: TOSHIBA MK6028GAL, BN101F, max UDMA/100 ata1.00: 117210240 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: port disabled. ignoring. scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6028GA BN10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>input: AT Translated Set 2 keyboard as /class/input/input1 sda1 sda2 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. TomoyoLinux Mandatory Access Control disabled by default. You need to install ccs-tools if you want to enable it. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb fsc_btns: found: Unknown (using defaults) input: fsc tablet buttons as /class/input/input2 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: AC Adapter [AC] (on-line) input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] ACPI: EC: non-query interrupt received, switching to interrupt mode Linux agpgart interface v0.103 ACPI: Battery Slot [CMB1] (battery present) acpi device:03: registered as cooling_device1 input: Video Bus as /class/input/input6 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Marking TSC unstable due to TSC halts in idle sd 0:0:0:0: Attached scsi generic sg0 type 0 intel_rng: FWH not detected USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected 8139too Fast Ethernet driver 0.9.28 Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.5-desktop-2mnb uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman usb 1-2: new full speed USB device using uhci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: New USB device found, idVendor=08ff, idProduct=2580 usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-2: Product: Fingerprint Sensor ndiswrapper version 1.53 loaded (smp=yes, preempt=no) usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.5-desktop-2mnb uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: New USB device found, idVendor=0430, idProduct=0530 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB Touch Panel usb 2-1: Manufacturer: Fujitsu Component usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.5-desktop-2mnb uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 input: Fujitsu FUJ02B1 as /class/input/input7 ACPI: Fujitsu FUJ02B1 [FJEX] (on) ACPI: Fujitsu FUJ02E3 [FEXT] (on) Registered led device: kbd_light fujitsu-laptop: driver 0.4.2E successfully loaded. usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=05ca, idProduct=1841 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.5-desktop-2mnb uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (27 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (27 C) usb 3-2: new full speed USB device using uhci_hcd and address 3 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0544000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 3-2: unable to read config index 0 descriptor/all usb 3-2: can't read configurations, error -71 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, hpet irqs apanel: Unknown symbol input_allocate_polled_device apanel: Unknown symbol input_free_polled_device apanel: Unknown symbol input_register_polled_device apanel: Unknown symbol input_unregister_polled_device hub 3-0:1.0: unable to enumerate USB device on port 2 usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.5-desktop-2mnb ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 8139too 0000:08:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 eth0: RealTek RTL8139 at 0xf8be6400, 00:17:42:bf:37:23, IRQ 22 eth0: Identified 8139 chip type 'RTL-8101' Yenta: CardBus bridge found at 0000:08:03.0 [10cf:131e] Yenta O2: res at 0x94/0xD4: 00/ea Yenta O2: enabling read prefetch/write burst 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Yenta: ISA IRQ mask 0x0c98, PCI irq 23 Socket status: 30000810 Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0xf0100000 - 0xf01fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff sdhci-pci 0000:08:03.2: SDHCI controller found [1217:7120] (rev 0) sdhci-pci 0000:08:03.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 mmc0: Unknown controller version (16). You may experience problems. mmc0: SDHCI controller on PCI [0000:08:03.2] using PIO ndiswrapper: driver net5211 (,03/23/2006,4.2.2.14) loaded ndiswrapper 0000:01:00.0: enabling device (0000 -> 0002) ndiswrapper 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ndiswrapper 0000:01:00.0: setting latency timer to 64 ndiswrapper: using IRQ 16 usb 5-5: new high speed USB device using ehci_hcd and address 4 usb 5-5: configuration #1 chosen from 1 choice usb 5-5: New USB device found, idVendor=05ca, idProduct=1841 usb 5-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 5-8: new high speed USB device using ehci_hcd and address 6 usb 5-8: configuration #1 chosen from 1 choice hub 5-8:1.0: USB hub found hub 5-8:1.0: 4 ports detected usb 5-8: New USB device found, idVendor=0409, idProduct=005a usb 5-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usbcore: registered new interface driver hiddev usb 1-2: USB disconnect, address 2 Linux video capture interface: v2.00 pccard: PCMCIA card inserted into slot 0 usb 1-2: new full speed USB device using uhci_hcd and address 3 wlan0: ethernet device 00:21:63:03:21:5c using serialized NDIS driver: net5211, version: 0x40002, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:001C.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: New USB device found, idVendor=08ff, idProduct=2580 usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-2: Product: Fingerprint Sensor usb 2-1: USB disconnect, address 2 usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: New USB device found, idVendor=0430, idProduct=0530 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB Touch Panel usb 2-1: Manufacturer: Fujitsu Component usb 3-1: USB disconnect, address 2 cs: memory probe 0xf0100000-0xf01fffff: excluding 0xf0100000-0xf010ffff pcmcia: registering new device pcmcia0.0 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. usb 3-2: new full speed USB device using uhci_hcd and address 5 usb 3-2: configuration #1 chosen from 1 choice usb 3-2: New USB device found, idVendor=0c24, idProduct=000f usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hiddev0hidraw0: USB HID v1.00 Device [Fujitsu Component USB Touch Panel] on usb-0000:00:1d.1-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usbcore: registered new interface driver ndiswrapper ndiswrapper: changing interface name from 'wlan0' to 'ath0' udev: renamed network interface wlan0 to ath0 usbcore: registered new interface driver usb_u810_tablet u810_tablet: v0.1:Fujitsu U810 tablet driver Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized scsi2 : pata_pcmcia ata3: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 3 Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb ata3.00: CFA: InnoDisk Corp. - iCF4000 2GB, 06/05/18, max UDMA/66 ata3.00: 4095504 sectors, multi 2: LBA ata3.00: configured for PIO0 isa bounce pool size: 16 pages scsi 2:0:0:0: Direct-Access ATA InnoDisk Corp. - 06/0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 4095504 512-byte hardware sectors (2097 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 4095504 512-byte hardware sectors (2097 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg1 type 0 Uniform Multi-Platform E-IDE driver Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Non-volatile memory driver v1.2 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: module loaded Adding 4088500k swap on /dev/sda5. Priority:-1 extents:1 across:4088500k usbcore: deregistering interface driver usbhid usbcore: deregistering interface driver hiddev usbcore: deregistering interface driver usb_u810_tablet input: Fujitsu Component USB Touch Panel as /class/input/input8 usbcore: registered new interface driver usb_u810_tablet u810_tablet: v0.1:Fujitsu U810 tablet driver Clocksource tsc unstable (delta = -86788277 ns) NET: Registered protocol family 17 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 [drm:i915_getparam] *ERROR* Unknown parameter 5 padlock: VIA PadLock not detected. padlock: VIA PadLock Hash Engine not detected. EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended