Attachment 20914 Details for Bug 18933 – dmesg output

dmesg output

dmesg (text/plain), 24.29 KB, created by samg on 2008-12-08 13:26:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: samg

Created: 2008-12-08 13:26:03 UTC

Size: 24.29 KB

patch

obsolete

> 
>Linux version 2.6.27-gentoo (root@gentoo) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 PREEMPT Mon Nov 10 19:18:26 GMT 2008
>Command line: root=/dev/sda2 video=vesafb:ywrap,mtrr,1280x1024-32@60
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
> BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
> BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>last_pfn = 0x3f7f0 max_arch_pfn = 0x3ffffffff
>init_memory_mapping
> 0000000000 - 003f600000 page 2M
> 003f600000 - 003f7f0000 page 4k
>kernel direct mapping tables up to 3f7f0000 @ 8000-b000
>last_map_addr: 3f7f0000 end: 3f7f0000
>DMI 2.3 present.
>ACPI: RSDP 000F68C0, 0014 (r0 GBT   )
>ACPI: RSDT 3F7F3040, 0030 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
>ACPI: FACP 3F7F30C0, 0074 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
>ACPI: DSDT 3F7F3180, 3A43 (r1 GBT    AWRDACPI     1000 MSFT  100000C)
>ACPI: FACS 3F7F0000, 0040
>ACPI: MCFG 3F7F6D00, 003C (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
>ACPI: APIC 3F7F6C40, 0068 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
>(4 early reservations) ==> bootmem [0000000000 - 003f7f0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000200000 - 00008088a8]    TEXT DATA BSS ==> [0000200000 - 00008088a8]
>  #2 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #3 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
>found SMP MP-table at [ffff8800000f4ef0] 000f4ef0
> [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0003f7f0
>On node 0 totalpages: 259983
>  DMA zone: 2299 pages, LIFO batch:0
>  DMA32 zone: 252484 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f800000:90800000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 254783
>Kernel command line: root=/dev/sda2 video=vesafb:ywrap,mtrr,1280x1024-32@60
>Initializing CPU#0
>Preemptible RCU implementation.
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PMTIMER calibration value
>Detected 2792.995 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 1016912k/1040320k available (3783k kernel code, 22396k reserved, 1551k data, 300k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.99 BogoMIPS (lpj=2792995)
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 256K
>using mwait in idle threads.
>CPU:                 Intel(R) Celeron(R) CPU 2.80GHz stepping 01
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>Using local APIC timer interrupts.
>APIC timer calibration result 8312473
>Detected 8.312 MHz APIC timer.
>net_namespace: 784 bytes
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255
>PCI: MCFG area at d0000000 reserved in E820
>PCI: Using MMCONFIG at d0000000 - dfffffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: 0000:00:02.0 reg 10 32bit mmio: [f2000000, f207ffff]
>PCI: 0000:00:02.0 reg 14 io port: [c000, c007]
>PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff]
>PCI: 0000:00:02.0 reg 1c 32bit mmio: [f2080000, f20bffff]
>PCI: 0000:00:1d.0 reg 20 io port: [b000, b01f]
>PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f]
>PCI: 0000:00:1d.2 reg 20 io port: [b800, b81f]
>PCI: 0000:00:1d.3 reg 20 io port: [bc00, bc1f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [f20c0000, f20c03ff]
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
>PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
>PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
>PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
>PCI: 0000:00:1f.1 reg 20 io port: [f000, f00f]
>PCI: 0000:00:1f.2 reg 10 io port: [d400, d407]
>PCI: 0000:00:1f.2 reg 14 io port: [d800, d803]
>PCI: 0000:00:1f.2 reg 18 io port: [dc00, dc07]
>PCI: 0000:00:1f.2 reg 1c io port: [e000, e003]
>PCI: 0000:00:1f.2 reg 20 io port: [e400, e40f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
>PCI: 0000:01:00.0 reg 10 io port: [9000, 901f]
>PCI: 0000:01:00.0 reg 14 io port: [9400, 940f]
>PCI: 0000:01:00.0 reg 18 io port: [9800, 980f]
>PCI: 0000:01:00.0 reg 1c io port: [9c00, 9c3f]
>pci 0000:01:00.0: supports D2
>PCI: 0000:01:05.0 reg 10 io port: [a000, a0ff]
>PCI: 0000:01:05.0 reg 14 32bit mmio: [f1005000, f10050ff]
>PCI: 0000:01:05.0 reg 30 32bit mmio: [0, ffff]
>pci 0000:01:05.0: supports D1
>pci 0000:01:05.0: supports D2
>pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:01:05.0: PME# disabled
>PCI: 0000:01:07.0 reg 10 32bit mmio: [f1004000, f10047ff]
>PCI: 0000:01:07.0 reg 14 32bit mmio: [f1000000, f1003fff]
>pci 0000:01:07.0: supports D1
>pci 0000:01:07.0: supports D2
>pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:01:07.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 io port: [9000, afff]
>PCI: bridge 0000:00:1e.0 32bit mmio: [f0000000, f1ffffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI-GART: No AMD northbridge found.
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x290-0x29f has been reserved
>system 00:01: ioport range 0x800-0x87f has been reserved
>system 00:01: ioport range 0x880-0x88f has been reserved
>system 00:07: ioport range 0x400-0x4bf could not be reserved
>system 00:08: iomem range 0xd0000000-0xdfffffff could not be reserved
>system 00:09: iomem range 0xcc000-0xd3fff has been reserved
>system 00:09: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:09: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:09: iomem range 0xfc000-0xfffff could not be reserved
>system 00:09: iomem range 0x3f7f0000-0x3f7fffff could not be reserved
>system 00:09: iomem range 0x0-0x9ffff could not be reserved
>system 00:09: iomem range 0x100000-0x3f7effff could not be reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:09: iomem range 0xfed13000-0xfed1dfff could not be reserved
>system 00:09: iomem range 0xfed20000-0xfed8ffff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:09: iomem range 0xffb00000-0xffb7ffff could not be reserved
>system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:09: iomem range 0xe0000-0xeffff has been reserved
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1e.0:   IO window: 0x9000-0xafff
>pci 0000:00:1e.0:   MEM window: 0xf0000000-0xf1ffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000040000000-0x000000400fffff
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [9000, afff]
>bus: 01 index 1 mmio: [f0000000, f1ffffff]
>bus: 01 index 2 mmio: [40000000, 400fffff]
>bus: 01 index 3 io port: [0, ffff]
>bus: 01 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>fuse init (API version 7.9)
>msgmni has been set to 1987
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>Real Time Clock Driver v1.12ac
>intel_rng: FWH not detected
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 915G Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 2 throttling states)
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets
>intelfb: Version 0.9.5
>intelfb: 00:02.0: Intel(R) 915G, aperture size 256MB, stolen memory 7932kB
>intelfb: Initial video mode is 1024x768-32@70.
>Console: switching to colour frame buffer device 128x48
>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
>brd: module loaded
>loop: module loaded
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>eth0: RTL8110s at 0xffffc20000028000, 00:14:85:17:f8:df, XID 04000000 IRQ 21
>Uniform Multi-Platform E-IDE driver
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>Probing IDE interface ide0...
>Switched to high resolution mode on CPU 0
>hda: LITE-ON DVDRW SHM-165P6S, ATAPI CD/DVD-ROM drive
>Probing IDE interface ide1...
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>Driver 'sd' needs updating - please use bus_type methods
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
>ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16)
>ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177]
>ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16)
>ata_piix 0000:00:1f.1: no available native port
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xe400 irq 19
>ata2: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xe408 irq 19
>ata1.01: ATA-7: Maxtor 6L200M0, BANC1G10, max UDMA/133
>ata1.01: 398297088 sectors, multi 16: LBA48 NCQ (not used)
>ata1.01: configured for UDMA/133
>ata2.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
>ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.01: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
>ata2.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>ata2.01: configured for UDMA/133
>isa bounce pool size: 16 pages
>scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
>sd 0:0:1:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
>sd 0:0:1:0: [sda] Write Protect is off
>sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
>sd 0:0:1:0: [sda] Write Protect is off
>sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:1:0: [sda] Attached SCSI disk
>sd 0:0:1:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 1:0:1:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 1:0:1:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:1:0: [sdc] Write Protect is off
>sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:1:0: [sdc] Write Protect is off
>sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 1:0:1:0: [sdc] Attached SCSI disk
>sd 1:0:1:0: Attached scsi generic sg2 type 0
>ohci1394 0000:01:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]  MMIO=[f1004000-f10047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ieee1394: raw1394: /dev/raw1394 device initialized
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf20c0000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 3 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usb 2-2.3: new full speed USB device using uhci_hcd and address 3
>usb 2-2.3: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00148500001815ef]
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
>input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-2.3
>input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.1/input/input3
>input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-2.3
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.17.
>ICE1712 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ALSA device list:
>  #0: M Audio Audiophile 24/96 at 0x9000, irq 20
>TCP cubic registered
>NET: Registered protocol family 10
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 17
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with journal data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Freeing unused kernel memory: 300k freed
>EXT3 FS on sda2, internal journal
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 1 processor cores.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000).
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc2, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>Adding 2385644k swap on /dev/sda3.  Priority:-1 extents:1 across:2385644k
>r8169: eth0: link up
>[drm:i915_getparam] *ERROR* Unknown parameter 5
>eth0: no IPv6 routers present
>cdrom: This disc doesn't have any tracks I recognize!
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>warning: `wodim' uses 32-bit capabilities (legacy support in use)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Netac    OnlyDisk         1.12 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdd] 64000 512-byte hardware sectors (33 MB)
>sd 2:0:0:0: [sdd] Write Protect is off
>sd 2:0:0:0: [sdd] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdd] Assuming drive cache: write through
>sd 2:0:0:0: [sdd] 64000 512-byte hardware sectors (33 MB)
>sd 2:0:0:0: [sdd] Write Protect is off
>sd 2:0:0:0: [sdd] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdd] Assuming drive cache: write through
> sdd: sdd1
>sd 2:0:0:0: [sdd] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>sd 2:0:0:0: ioctl_internal_command return code = 8000002
>   : Sense Key : 0x0 [current] 
>   : ASC=0x0 ASCQ=0x0
>sd 2:0:0:0: ioctl_internal_command return code = 8000002
>   : Sense Key : 0x0 [current] 
>   : ASC=0x0 ASCQ=0x0
>sd 2:0:0:0: ioctl_internal_command return code = 8000002
>   : Sense Key : 0x0 [current] 
>   : ASC=0x0 ASCQ=0x0
>usb 3-2: USB disconnect, address 2
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access     Netac    OnlyDisk         1.12 PQ: 0 ANSI: 2
>sd 3:0:0:0: [sdd] 64000 512-byte hardware sectors (33 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 03 00 00 00
>sd 3:0:0:0: [sdd] Assuming drive cache: write through
>sd 3:0:0:0: [sdd] 64000 512-byte hardware sectors (33 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 03 00 00 00
>sd 3:0:0:0: [sdd] Assuming drive cache: write through
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>usb 3-2: USB disconnect, address 3
>scsi 3:0:0:0: rejecting I/O to dead device
>lame[30504]: segfault at 35cb874000 ip 00000035cb62fc81 sp 00007fff241eb740 error 6 in libmp3lame.so.0.0.0[35cb600000+41000]
>lame[2371]: segfault at 5cb90d362b0 ip 000000359e07fb01 sp 00007fff6f852128 error 6 in libc-2.8.so[359e000000+155000]
>lame[3128]: segfault at 380695d7fb0 ip 000000359e07fac3 sp 00007fffdd6fffa8 error 6 in libc-2.8.so[359e000000+155000]
>lame[5962]: segfault at 361bd5cf74 ip 00000035cb62fa36 sp 00007fff1934a890 error 4 in libmp3lame.so.0.0.0[35cb600000+41000]
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>r8169: eth0: link up
>eth0: no IPv6 routers present
>[drm:i915_getparam] *ERROR* Unknown parameter 5
>[drm:i915_getparam] *ERROR* Unknown parameter 5
>r8169: eth0: link up
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 18933: 20874 | 20875 | 20914

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.