Linux version 2.6.27-gentoo (root@gentoo) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 PREEMPT Mon Nov 10 19:18:26 GMT 2008 Command line: root=/dev/sda2 video=vesafb:ywrap,mtrr,1280x1024-32@60 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable) BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS) BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data) BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) last_pfn = 0x3f7f0 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 003f600000 page 2M 003f600000 - 003f7f0000 page 4k kernel direct mapping tables up to 3f7f0000 @ 8000-b000 last_map_addr: 3f7f0000 end: 3f7f0000 DMI 2.3 present. ACPI: RSDP 000F68C0, 0014 (r0 GBT ) ACPI: RSDT 3F7F3040, 0030 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) ACPI: FACP 3F7F30C0, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) ACPI: DSDT 3F7F3180, 3A43 (r1 GBT AWRDACPI 1000 MSFT 100000C) ACPI: FACS 3F7F0000, 0040 ACPI: MCFG 3F7F6D00, 003C (r1 GBT AWRDACPI 42302E31 AWRD 1010101) ACPI: APIC 3F7F6C40, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101) (4 early reservations) ==> bootmem [0000000000 - 003f7f0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000200000 - 00008088a8] TEXT DATA BSS ==> [0000200000 - 00008088a8] #2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #3 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000f4ef0] 000f4ef0 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003f7f0 On node 0 totalpages: 259983 DMA zone: 2299 pages, LIFO batch:0 DMA32 zone: 252484 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f800000:90800000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254783 Kernel command line: root=/dev/sda2 video=vesafb:ywrap,mtrr,1280x1024-32@60 Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 2792.995 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... No AGP bridge found Memory: 1016912k/1040320k available (3783k kernel code, 22396k reserved, 1551k data, 300k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.99 BogoMIPS (lpj=2792995) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K using mwait in idle threads. CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 01 ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Using local APIC timer interrupts. APIC timer calibration result 8312473 Detected 8.312 MHz APIC timer. net_namespace: 784 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255 PCI: MCFG area at d0000000 reserved in E820 PCI: Using MMCONFIG at d0000000 - dfffffff PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 32bit mmio: [f2000000, f207ffff] PCI: 0000:00:02.0 reg 14 io port: [c000, c007] PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff] PCI: 0000:00:02.0 reg 1c 32bit mmio: [f2080000, f20bffff] PCI: 0000:00:1d.0 reg 20 io port: [b000, b01f] PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f] PCI: 0000:00:1d.2 reg 20 io port: [b800, b81f] PCI: 0000:00:1d.3 reg 20 io port: [bc00, bc1f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f20c0000, f20c03ff] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [f000, f00f] PCI: 0000:00:1f.2 reg 10 io port: [d400, d407] PCI: 0000:00:1f.2 reg 14 io port: [d800, d803] PCI: 0000:00:1f.2 reg 18 io port: [dc00, dc07] PCI: 0000:00:1f.2 reg 1c io port: [e000, e003] PCI: 0000:00:1f.2 reg 20 io port: [e400, e40f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [500, 51f] PCI: 0000:01:00.0 reg 10 io port: [9000, 901f] PCI: 0000:01:00.0 reg 14 io port: [9400, 940f] PCI: 0000:01:00.0 reg 18 io port: [9800, 980f] PCI: 0000:01:00.0 reg 1c io port: [9c00, 9c3f] pci 0000:01:00.0: supports D2 PCI: 0000:01:05.0 reg 10 io port: [a000, a0ff] PCI: 0000:01:05.0 reg 14 32bit mmio: [f1005000, f10050ff] PCI: 0000:01:05.0 reg 30 32bit mmio: [0, ffff] pci 0000:01:05.0: supports D1 pci 0000:01:05.0: supports D2 pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold pci 0000:01:05.0: PME# disabled PCI: 0000:01:07.0 reg 10 32bit mmio: [f1004000, f10047ff] PCI: 0000:01:07.0 reg 14 32bit mmio: [f1000000, f1003fff] pci 0000:01:07.0: supports D1 pci 0000:01:07.0: supports D2 pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:07.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [9000, afff] PCI: bridge 0000:00:1e.0 32bit mmio: [f0000000, f1ffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-GART: No AMD northbridge found. hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x290-0x29f has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:07: ioport range 0x400-0x4bf could not be reserved system 00:08: iomem range 0xd0000000-0xdfffffff could not be reserved system 00:09: iomem range 0xcc000-0xd3fff has been reserved system 00:09: iomem range 0xf0000-0xf7fff could not be reserved system 00:09: iomem range 0xf8000-0xfbfff could not be reserved system 00:09: iomem range 0xfc000-0xfffff could not be reserved system 00:09: iomem range 0x3f7f0000-0x3f7fffff could not be reserved system 00:09: iomem range 0x0-0x9ffff could not be reserved system 00:09: iomem range 0x100000-0x3f7effff could not be reserved system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:09: iomem range 0xfed13000-0xfed1dfff could not be reserved system 00:09: iomem range 0xfed20000-0xfed8ffff could not be reserved system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:09: iomem range 0xffb00000-0xffb7ffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved system 00:09: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0x9000-0xafff pci 0000:00:1e.0: MEM window: 0xf0000000-0xf1ffffff pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x000000400fffff pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [9000, afff] bus: 01 index 1 mmio: [f0000000, f1ffffff] bus: 01 index 2 mmio: [40000000, 400fffff] bus: 01 index 3 io port: [0, ffff] bus: 01 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.9) msgmni has been set to 1987 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device Real Time Clock Driver v1.12ac intel_rng: FWH not detected Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 915G Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 2 throttling states) [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets intelfb: Version 0.9.5 intelfb: 00:02.0: Intel(R) 915G, aperture size 256MB, stolen memory 7932kB intelfb: Initial video mode is 1024x768-32@70. Console: switching to colour frame buffer device 128x48 Serial: 8250/16550 driver4 ports, IRQ sharing disabled brd: module loaded loop: module loaded tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 eth0: RTL8110s at 0xffffc20000028000, 00:14:85:17:f8:df, XID 04000000 IRQ 21 Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... Switched to high resolution mode on CPU 0 hda: LITE-ON DVDRW SHM-165P6S, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: BAR 0: can't reserve I/O region [0x1f0-0x1f7] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 0 (errno=-16) ata_piix 0000:00:1f.1: BAR 2: can't reserve I/O region [0x170-0x177] ata_piix 0000:00:1f.1: failed to request/iomap BARs for port 1 (errno=-16) ata_piix 0000:00:1f.1: no available native port ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xe400 irq 19 ata2: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xe408 irq 19 ata1.01: ATA-7: Maxtor 6L200M0, BANC1G10, max UDMA/133 ata1.01: 398297088 sectors, multi 16: LBA48 NCQ (not used) ata1.01: configured for UDMA/133 ata2.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.01: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 ata2.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 ata2.01: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:1:0: Direct-Access ATA Maxtor 6L200M0 BANC PQ: 0 ANSI: 5 sd 0:0:1:0: [sda] 398297088 512-byte hardware sectors (203928 MB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sda] 398297088 512-byte hardware sectors (203928 MB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:1:0: [sda] Attached SCSI disk sd 0:0:1:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 1:0:1:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 sd 1:0:1:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:1:0: [sdc] Write Protect is off sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) sd 1:0:1:0: [sdc] Write Protect is off sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sd 1:0:1:0: [sdc] Attached SCSI disk sd 1:0:1:0: Attached scsi generic sg2 type 0 ohci1394 0000:01:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f1004000-f10047ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf20c0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-2: new full speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 3 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usb 2-2.3: new full speed USB device using uhci_hcd and address 3 usb 2-2.3: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 PNP: PS/2 controller doesn't have KBD irq; using default 1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice ieee1394: Host added: ID:BUS[0-00:1023] GUID[00148500001815ef] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2 input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-2.3 input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.1/input/input3 input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-2.3 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. ICE1712 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ALSA device list: #0: M Audio Audiophile 24/96 at 0x9000, irq 20 TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with journal data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 300k freed EXT3 FS on sda2, internal journal vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 1 processor cores. vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000). kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with journal data mode. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with journal data mode. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on sdc2, internal journal EXT3-fs: mounted filesystem with journal data mode. Adding 2385644k swap on /dev/sda3. Priority:-1 extents:1 across:2385644k r8169: eth0: link up [drm:i915_getparam] *ERROR* Unknown parameter 5 eth0: no IPv6 routers present cdrom: This disc doesn't have any tracks I recognize! kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with journal data mode. warning: `wodim' uses 32-bit capabilities (legacy support in use) kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with journal data mode. usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 2:0:0:0: Direct-Access Netac OnlyDisk 1.12 PQ: 0 ANSI: 2 sd 2:0:0:0: [sdd] 64000 512-byte hardware sectors (33 MB) sd 2:0:0:0: [sdd] Write Protect is off sd 2:0:0:0: [sdd] Mode Sense: 03 00 00 00 sd 2:0:0:0: [sdd] Assuming drive cache: write through sd 2:0:0:0: [sdd] 64000 512-byte hardware sectors (33 MB) sd 2:0:0:0: [sdd] Write Protect is off sd 2:0:0:0: [sdd] Mode Sense: 03 00 00 00 sd 2:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 2:0:0:0: [sdd] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg3 type 0 sd 2:0:0:0: ioctl_internal_command return code = 8000002 : Sense Key : 0x0 [current] : ASC=0x0 ASCQ=0x0 sd 2:0:0:0: ioctl_internal_command return code = 8000002 : Sense Key : 0x0 [current] : ASC=0x0 ASCQ=0x0 sd 2:0:0:0: ioctl_internal_command return code = 8000002 : Sense Key : 0x0 [current] : ASC=0x0 ASCQ=0x0 usb 3-2: USB disconnect, address 2 usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 3:0:0:0: Direct-Access Netac OnlyDisk 1.12 PQ: 0 ANSI: 2 sd 3:0:0:0: [sdd] 64000 512-byte hardware sectors (33 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 03 00 00 00 sd 3:0:0:0: [sdd] Assuming drive cache: write through sd 3:0:0:0: [sdd] 64000 512-byte hardware sectors (33 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 03 00 00 00 sd 3:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 3:0:0:0: [sdd] Attached SCSI removable disk sd 3:0:0:0: Attached scsi generic sg3 type 0 usb 3-2: USB disconnect, address 3 scsi 3:0:0:0: rejecting I/O to dead device lame[30504]: segfault at 35cb874000 ip 00000035cb62fc81 sp 00007fff241eb740 error 6 in libmp3lame.so.0.0.0[35cb600000+41000] lame[2371]: segfault at 5cb90d362b0 ip 000000359e07fb01 sp 00007fff6f852128 error 6 in libc-2.8.so[359e000000+155000] lame[3128]: segfault at 380695d7fb0 ip 000000359e07fac3 sp 00007fffdd6fffa8 error 6 in libc-2.8.so[359e000000+155000] lame[5962]: segfault at 361bd5cf74 ip 00000035cb62fa36 sp 00007fff1934a890 error 4 in libmp3lame.so.0.0.0[35cb600000+41000] kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with journal data mode. r8169: eth0: link up eth0: no IPv6 routers present [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5 r8169: eth0: link up eth0: no IPv6 routers present