Attachment 16374 Details for Bug 13779 – output from dmesg

output from dmesg

info_dmesg.txt (text/plain), 17.27 KB, created by Andrew Muhametshin on 2008-05-06 01:13:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Muhametshin

Created: 2008-05-06 01:13:04 UTC

Size: 17.27 KB

patch

obsolete

>Linux version 2.6.25-gentoo-r2 (root@illusia) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 PREEMPT Tue May 6 08:02:54 MSD 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002f740000 (usable)
> BIOS-e820: 000000002f740000 - 000000002f750000 (ACPI data)
> BIOS-e820: 000000002f750000 - 000000002f800000 (ACPI NVS)
>759MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Entering add_active_range(0, 0, 194368) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   194368
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   194368
>On node 0 totalpages: 194368
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1486 pages used for memmap
>  Normal zone: 188786 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>ACPI: RSDP 000F5080, 0014 (r0 ACPIAM)
>ACPI: RSDT 2F740000, 0030 (r1 A M I  OEMRSDT   6000501 MSFT       97)
>ACPI: FACP 2F740200, 0081 (r2 A M I  OEMFACP   6000501 MSFT       97)
>ACPI: DSDT 2F740360, 72A1 (r1  0ABBD 0ABBD001        1 MSFT  100000E)
>ACPI: FACS 2F750000, 0040
>ACPI: APIC 2F740300, 0054 (r1 A M I  OEMAPIC   6000501 MSFT       97)
>ACPI: OEMB 2F750040, 004D (r1 A M I  OEMBIOS   6000501 MSFT       97)
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 2f800000:d0800000)
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 192850
>Kernel command line: root=/dev/hda4
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1400.059 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 765940k/777472k available (2346k kernel code, 11108k reserved, 957k data, 200k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
>    vmalloc : 0xf0000000 - 0xfffb3000   ( 255 MB)
>    lowmem  : 0xc0000000 - 0xef740000   ( 759 MB)
>      .init : 0xc043c000 - 0xc046e000   ( 200 kB)
>      .data : 0xc034a863 - 0xc0439fd8   ( 957 kB)
>      .text : 0xc0100000 - 0xc034a863   (2346 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2801.00 BogoMIPS (lpj=1400504)
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>CPU: Intel(R) Celeron(R) M processor         1.40GHz stepping 08
>Checking 'hlt' instruction... OK.
>Freeing SMP alternatives: 0k freed
>ACPI: Core revision 20070126
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>net_namespace: 152 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 12)
>ACPI: Power Resource [GFAN] (off)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  E8, should be E2 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NET: Registered protocol family 23
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0xe400-0xe47f has been reserved
>system 00:07: ioport range 0xec00-0xec3f has been reserved
>system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved
>system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:09: ioport range 0xc00-0xc7f has been reserved
>system 00:09: ioport range 0x290-0x29f has been reserved
>system 00:09: ioport range 0x230-0x23f has been reserved
>system 00:0c: iomem range 0xffb80000-0xffbfffff has been reserved
>system 00:0c: iomem range 0xfff80000-0xffffffff has been reserved
>system 00:0d: iomem range 0xffc00000-0xfff7ffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0x2f7fffff could not be reserved
>system 00:0e: iomem range 0x0-0x0 could not be reserved
>PCI: Bus 2, cardbus bridge: 0000:01:05.0
>  IO window: 0x0000c000-0x0000c0ff
>  IO window: 0x0000c400-0x0000c4ff
>  PREFETCH window: 0x34000000-0x37ffffff
>  MEM window: 0x38000000-0x3bffffff
>PCI: Bus 6, cardbus bridge: 0000:01:05.1
>  IO window: 0x0000cc00-0x0000ccff
>  IO window: 0x00001000-0x000010ff
>  PREFETCH window: 0x3c000000-0x3fffffff
>  MEM window: 0x40000000-0x43ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: 0xfe800000-0xfe8fffff
>  PREFETCH window: 0x00000000de600000-0x00000000de6fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:01:05.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:05.1 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Machine check exception polling timer started.
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Total HugeTLB memory allocated, 0
>io scheduler noop registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>Real Time Clock Driver v1.12ac
>intel_rng: FWH not detected
>Linux agpgart interface v0.103
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>Hangcheck: Using get_cycles().
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: AC Adapter [AC0] (on-line)
>ACPI: Battery Slot [BAT0] (battery absent)
>input: Power Button (FF) as /class/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input1
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input2
>ACPI: Lid Switch [LID]
>ACPI: Transitioning device [FN00] to D3
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FN00] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to: possible TSC halt in C2.
>Switched to high resolution mode on CPU 0
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (52 C)
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>loop: module loaded
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>console [netcon0] enabled
>netconsole: network logging started
>Linux video capture interface: v2.00
>Uniform Multi-Platform E-IDE driver
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller (0x8086:0x24ca rev 0x03) at  PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:PIO
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:PIO
>Probing IDE interface ide0...
>hda: HTS424040M9AT00, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/100 mode selected
>Probing IDE interface ide1...
>Clocksource tsc unstable (delta = -488384612 ns)
>hdc: TSSTcorpCDW/DVD TS-L462A, ATAPI CD/DVD-ROM drive
>hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>Driver 'sd' needs updating - please use bus_type methods
>Fusion MPT base driver 3.04.06
>Copyright (c) 1999-2007 LSI Corporation
>Fusion MPT SPI Host driver 3.04.06
>ACPI: PCI Interrupt 0000:01:05.2[C] -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[fe8ff800-fe8fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ieee1394: raw1394: /dev/raw1394 device initialized
>Yenta: CardBus bridge found at 0000:01:05.0 [1043:1894]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 17
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
>pcmcia: parent PCI bridge Memory window: 0xfe800000 - 0xfe8fffff
>pcmcia: parent PCI bridge Memory window: 0xde600000 - 0xde6fffff
>Yenta: CardBus bridge found at 0000:01:05.1 [1043:1894]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#01) from #05 to #09
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
>pcmcia: parent PCI bridge Memory window: 0xfe800000 - 0xfe8fffff
>pcmcia: parent PCI bridge Memory window: 0xde600000 - 0xde6fffff
>usbmon: debugfs is not available
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb7fc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d480
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input3
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800032d9e70]
>usbcore: registered new interface driver wacom
>drivers/input/tablet/wacom_sys.c: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>oprofile: using NMI interrupt.
>TCP cubic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>Using IPI Shortcut mode
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0xa0471b/0x0
>input: SynPS/2 Synaptics TouchPad as /class/input/input4
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Freeing unused kernel memory: 200k freed
>input: PC Speaker as /class/input/input5
>agpgart: Detected an Intel 855GM Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0xf0000000
>asus-laptop: Asus Laptop Support version 0.42
>asus-laptop:   A3L model detected
>Registered led device: asus::mail
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>eth0: RealTek RTL8139 at 0xc800, 00:11:d8:bf:13:9a, IRQ 18
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 18 (level, low) -> IRQ 18
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>udev: renamed network interface eth1 to eth2
>MC'97 1 converters and GPIO not ready (0xff00)
>PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50334 usecs
>intel8x0: clocking to 48000
>i2c /dev entries driver
>ieee80211_crypt: registered algorithm 'WEP'
>ieee80211_crypt: registered algorithm 'CCMP'
>ieee80211_crypt: registered algorithm 'TKIP'
>EXT3 FS on hda4, internal journal
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>Adding 522104k swap on /dev/hda3.  Priority:-1 extents:1 across:522104k
>hda: UDMA/100 mode selected
>hdc: UDMA/33 mode selected
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 1
>[drm:drm_lock_free] *ERROR* 2 freed heavyweight lock held by 1

Actions: View

Attachments on bug 13779: 16374 | 16375 | 16376 | 16377 | 16378 | 16379

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.