[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ (buildtopcommit@x-kernel) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #2810 SMP Tue May 20 11:24:51 CST 2014 [ 0.000000] Command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_20/drm-intel-nightly/0791a325e382bfd2b06673655b90ed64682a519a/bzImage_x86_64 root=/dev/sda4 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_20/drm-intel-nightly/0791a325e382bfd2b06673655b90ed64682a519a/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0xcccccccc [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009dcdffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009dce0000-0x000000009dcfdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009dcfe000-0x00000000aaf4dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aaf4e000-0x00000000ab5b5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ab5b6000-0x00000000ab7b5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ab7b6000-0x00000000ab7e1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ab7e2000-0x00000000ab7fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable [ 0.000000] 3 base 00AD000000 mask 7FFF000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xab7ff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0323d000, 0x0323dfff] PGTABLE [ 0.000000] BRK [0x0323e000, 0x0323efff] PGTABLE [ 0.000000] BRK [0x0323f000, 0x0323ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14f600000-0x14f7fffff] [ 0.000000] [mem 0x14f600000-0x14f7fffff] page 2M [ 0.000000] BRK [0x03240000, 0x03240fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f5fffff] [ 0.000000] [mem 0x14c000000-0x14f5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x14bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9dcdffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0x9dbfffff] page 2M [ 0.000000] [mem 0x9dc00000-0x9dcdffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9dcfe000-0xaaf4dfff] [ 0.000000] [mem 0x9dcfe000-0x9ddfffff] page 4k [ 0.000000] [mem 0x9de00000-0xaadfffff] page 2M [ 0.000000] [mem 0xaae00000-0xaaf4dfff] page 4k [ 0.000000] BRK [0x03241000, 0x03241fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xab7e2000-0xab7fefff] [ 0.000000] [mem 0xab7e2000-0xab7fefff] page 4k [ 0.000000] BRK [0x03242000, 0x03242fff] PGTABLE [ 0.000000] ACPI: RSDP 0x00000000AB7E1014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000AB7C9188 000114 (v01 INTEL BDW-ULT 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000AB7D7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: DSDT 0x000000009DCE0000 01D795 (v02 INTEL BDW 00000000 INTL 20130927) [ 0.000000] ACPI: FACS 0x00000000AB799000 000040 [ 0.000000] ACPI: TCPA 0x00000000AB7DF000 000032 (v02 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: UEFI 0x00000000AB79C000 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000AB7DE000 0004B5 (v01 Intel_ Tpm2Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7DD000 00004E (v01 MeSsdt MeSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: TPM2 0x00000000AB7DC000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000AB7DB000 0005B1 (v01 Intel PerfTune 00001000 INTL 20130927) [ 0.000000] ACPI: DBGP 0x00000000AB7DA000 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000AB7D9000 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: LPIT 0x00000000AB7D8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: HPET 0x00000000AB7D6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: APIC 0x00000000AB7D5000 0000BC (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: MCFG 0x00000000AB7D4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F) [ 0.000000] ACPI: WDAT 0x00000000AB7D3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000AB7D2000 000250 (v01 INTEL sensrhub 00000000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CF000 002E26 (v01 INTEL PtidDevc 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CE000 000C7D (v01 INTEL Ther_Rvp 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CD000 00017F (v01 INTEL zpodd 00001000 INTL 20130927) [ 0.000000] ACPI: BOOT 0x00000000AB7CC000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000AB7CB000 00053B (v01 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7CA000 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7C2000 006F14 (v01 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7E0000 0006A7 (v01 CppcTa CppcTabl 00001000 INTL 20130927) [ 0.000000] ACPI: PCCT 0x00000000AB7C1000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927) [ 0.000000] ACPI: SSDT 0x00000000AB7C0000 000AC4 (v01 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927) [ 0.000000] ACPI: CSRT 0x00000000AB7BF000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: DMAR 0x00000000AB7BE000 000138 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: FPDT 0x00000000AB7BD000 000044 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000AB7BC000 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x00000000AB7BB000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f7fffff] [ 0.000000] NODE_DATA [mem 0x14f7fa000-0x14f7fdfff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14f7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00057fff] [ 0.000000] node 0: [mem 0x00059000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x9dcdffff] [ 0.000000] node 0: [mem 0x9dcfe000-0xaaf4dfff] [ 0.000000] node 0: [mem 0xab7e2000-0xab7fefff] [ 0.000000] node 0: [mem 0x100000000-0x14f7fffff] [ 0.000000] On node 0 totalpages: 1025770 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10878 pages used for memmap [ 0.000000] DMA32 zone: 696141 pages, LIFO batch:31 [ 0.000000] Normal zone: 5088 pages used for memmap [ 0.000000] Normal zone: 325632 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xad800000-0xaf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9dce0000-0x9dcfdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xaaf4e000-0xab5b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab5b6000-0xab7b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab7b6000-0xab7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xab7ff000-0xad7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xad800000-0xaf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xaf800000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88014f400000 s74752 r8192 d23552 u262144 [ 0.000000] pcpu-alloc: s74752 r8192 d23552 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009714 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2014_05_20/drm-intel-nightly/0791a325e382bfd2b06673655b90ed64682a519a/bzImage_x86_64 root=/dev/sda4 drm.debug=0xe modules_path=kernels//nightly_parents/2014_05_20/drm-intel-nightly/0791a325e382bfd2b06673655b90ed64682a519a/modules_x86_64/lib/modules/3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ acpi_rsdp=0xab7e1014 kexec_jump_back_entry=0xcccccccc [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3935340K/4103080K available (7365K kernel code, 723K rwdata, 3568K rodata, 22752K init, 600K bss, 167740K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:1016 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1795.981 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.96 BogoMIPS (lpj=1795981) [ 0.000008] pid_max: default: 32768 minimum: 301 [ 0.000016] ACPI: Core revision 20140214 [ 0.030643] ACPI: All ACPI Tables successfully acquired [ 0.030671] Security Framework initialized [ 0.030972] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.031840] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.032234] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.032243] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.032466] CPU: Physical Processor ID: 0 [ 0.032469] CPU: Processor Core ID: 0 [ 0.033681] mce: CPU supports 7 MCE banks [ 0.033693] CPU0: Thermal LVT vector (0xfa) already installed [ 0.033703] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 tlb_flushall_shift: 6 [ 0.034151] Freeing SMP alternatives memory: 32K (ffffffff8319e000 - ffffffff831a6000) [ 0.034810] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044822] smpboot: CPU0: Intel(R) Core(TM) i5-5###U CPU @ 1.80GHz (fam: 06, model: 3d, stepping: 04) [ 0.044833] TSC deadline timer enabled [ 0.044841] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.044850] ... version: 3 [ 0.044852] ... bit width: 48 [ 0.044854] ... generic registers: 4 [ 0.044857] ... value mask: 0000ffffffffffff [ 0.044859] ... max period: 0000ffffffffffff [ 0.044861] ... fixed-purpose events: 3 [ 0.044863] ... event mask: 000000070000000f [ 0.045102] x86: Booting SMP configuration: [ 0.045105] .... node #0, CPUs: #1 [ 0.057471] CPU1: Thermal LVT vector (0xfa) already installed [ 0.059592] #2 [ 0.072172] CPU2: Thermal LVT vector (0xfa) already installed [ 0.086663] #3 [ 0.086663] CPU3: Thermal LVT vector (0xfa) already installed [ 0.088738] x86: Booted up 1 node, 4 CPUs [ 0.088745] smpboot: Total of 4 processors activated (14367.84 BogoMIPS) [ 0.093809] devtmpfs: initialized [ 0.094209] PM: Registering ACPI NVS region [mem 0xab5b6000-0xab7b5fff] (2097152 bytes) [ 0.094330] xor: automatically using best checksumming function: [ 0.103569] avx : 17204.000 MB/sec [ 0.103597] RTC time: 1:17:31, date: 01/10/01 [ 0.103644] NET: Registered protocol family 16 [ 0.103890] cpuidle: using governor ladder [ 0.103893] cpuidle: using governor menu [ 0.104031] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.104034] ACPI: bus type PCI registered [ 0.104068] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.104072] PCI: not using MMCONFIG [ 0.104075] PCI: Using configuration type 1 for base access [ 0.124609] raid6: sse2x1 5609 MB/s [ 0.141623] raid6: sse2x2 6695 MB/s [ 0.158647] raid6: sse2x4 7960 MB/s [ 0.175661] raid6: avx2x1 10832 MB/s [ 0.192686] raid6: avx2x2 12308 MB/s [ 0.209703] raid6: avx2x4 14414 MB/s [ 0.209705] raid6: using algorithm avx2x4 (14414 MB/s) [ 0.209708] raid6: using avx2x2 recovery algorithm [ 0.209747] ACPI: Added _OSI(Module Device) [ 0.209749] ACPI: Added _OSI(Processor Device) [ 0.209752] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.209754] ACPI: Added _OSI(Processor Aggregator Device) [ 0.221938] ACPI: Executed 18 blocks of module-level executable AML code [ 0.255930] ACPI: SSDT 0x00000000AB57CA18 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.256874] ACPI: Dynamic OEM Table Load: [ 0.256878] ACPI: SSDT 0x0000000000000000 0004AE (v01 PmRef Cpu0Cst 00003001 INTL 20130927) [ 0.263102] ACPI: SSDT 0x00000000AB57D818 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.264334] ACPI: Dynamic OEM Table Load: [ 0.264337] ACPI: SSDT 0x0000000000000000 000792 (v01 PmRef ApIst 00003000 INTL 20130927) [ 0.268940] ACPI: SSDT 0x00000000AB57BD98 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.269891] ACPI: Dynamic OEM Table Load: [ 0.269894] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20130927) [ 0.277259] ACPI: Interpreter enabled [ 0.277269] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.277279] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.277304] ACPI: (supports S0 S3 S4 S5) [ 0.277307] ACPI: Using IOAPIC for interrupt routing [ 0.277331] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.279717] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.290628] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.291157] ACPI: Power Resource [PG00] (on) [ 0.297203] ACPI: Power Resource [PG01] (on) [ 0.305218] ACPI: Power Resource [PG02] (on) [ 0.334891] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.336262] ACPI: Power Resource [FN00] (off) [ 0.336344] ACPI: Power Resource [FN01] (off) [ 0.336425] ACPI: Power Resource [FN02] (off) [ 0.336504] ACPI: Power Resource [FN03] (off) [ 0.336583] ACPI: Power Resource [FN04] (off) [ 0.337705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.337714] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.338254] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.338866] PCI host bridge to bus 0000:00 [ 0.338870] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.338874] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.338877] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.338881] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.338884] pci_bus 0000:00: root bus resource [mem 0xaf800000-0xfeafffff] [ 0.338895] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.339159] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.339175] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] [ 0.339183] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.339190] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.339439] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.339448] pci 0000:00:03.0: reg 0x10: [mem 0xc1030000-0xc1033fff 64bit] [ 0.339717] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.339737] pci 0000:00:14.0: reg 0x10: [mem 0xc1020000-0xc102ffff 64bit] [ 0.339799] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.340004] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.340056] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.340078] pci 0000:00:16.0: reg 0x10: [mem 0xc1035000-0xc103501f 64bit] [ 0.340151] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.340394] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.340412] pci 0000:00:19.0: reg 0x10: [mem 0xc1000000-0xc101ffff] [ 0.340421] pci 0000:00:19.0: reg 0x14: [mem 0xc1038000-0xc1038fff] [ 0.340429] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.340491] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.340690] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.340743] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.341089] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.341105] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.341113] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.341121] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.341129] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.341137] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.341145] pci 0000:00:1f.2: reg 0x24: [mem 0xc1037000-0xc10377ff] [ 0.341184] pci 0000:00:1f.2: PME# supported from D3hot [ 0.341412] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.341427] pci 0000:00:1f.3: reg 0x10: [mem 0xc1034000-0xc10340ff 64bit] [ 0.341448] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.341694] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.341723] pci 0000:00:1f.6: reg 0x10: [mem 0xc1036000-0xc1036fff 64bit] [ 0.342035] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.344041] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.344100] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344156] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.344210] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 0.344264] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 0.344318] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344371] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344693] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.344911] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.345019] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.345024] vgaarb: loaded [ 0.345026] vgaarb: bridge control possible 0000:00:02.0 [ 0.345110] SCSI subsystem initialized [ 0.345164] libata version 3.00 loaded. [ 0.345208] ACPI: bus type USB registered [ 0.345242] usbcore: registered new interface driver usbfs [ 0.345260] usbcore: registered new interface driver hub [ 0.345294] usbcore: registered new device driver usb [ 0.345330] pps_core: LinuxPPS API ver. 1 registered [ 0.345333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.345341] PTP clock support registered [ 0.345406] PCI: Using ACPI for IRQ routing [ 0.351483] PCI: pci_cache_line_size set to 64 bytes [ 0.351510] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.351512] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.351514] e820: reserve RAM buffer [mem 0x9dce0000-0x9fffffff] [ 0.351516] e820: reserve RAM buffer [mem 0xaaf4e000-0xabffffff] [ 0.351518] e820: reserve RAM buffer [mem 0xab7ff000-0xabffffff] [ 0.351519] e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff] [ 0.351628] NetLabel: Initializing [ 0.351631] NetLabel: domain hash size = 128 [ 0.351633] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.351647] NetLabel: unlabeled traffic allowed by default [ 0.351798] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.351807] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.353833] Switched to clocksource hpet [ 0.353884] pnp: PnP ACPI init [ 0.353895] ACPI: bus type PNP registered [ 0.354199] system 00:00: [io 0x06a4] has been reserved [ 0.354203] system 00:00: [io 0x06a0] has been reserved [ 0.354207] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.354338] pnp 00:01: [dma 4] [ 0.354365] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.354393] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.354508] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.354572] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.354576] system 00:04: [io 0xffff] has been reserved [ 0.354582] system 00:04: [io 0xffff] has been reserved [ 0.354585] system 00:04: [io 0xffff] has been reserved [ 0.354588] system 00:04: [io 0x1800-0x18fe] could not be reserved [ 0.354592] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.354596] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.354651] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.354696] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.354700] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.354837] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.354958] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.355557] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.355561] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.355565] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.355568] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved [ 0.355572] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved [ 0.355575] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved [ 0.355579] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved [ 0.355583] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.355700] pnp 00:0a: Plug and Play ACPI device, IDs INT3437 (active) [ 0.355879] pnp 00:0b: unknown resource type 18 in _CRS [ 0.355883] pnp 00:0b: can't evaluate _CRS: 1 [ 0.355919] pnp 00:0b: Plug and Play ACPI device, IDs INT3432 (active) [ 0.356462] pnp 00:0c: unknown resource type 18 in _CRS [ 0.356466] pnp 00:0c: can't evaluate _CRS: 1 [ 0.356506] pnp 00:0c: Plug and Play ACPI device, IDs INT3433 (active) [ 0.356983] pnp 00:0d: unknown resource type 18 in _CRS [ 0.356987] pnp 00:0d: can't evaluate _CRS: 1 [ 0.357033] pnp 00:0d: Plug and Play ACPI device, IDs INT3435 (active) [ 0.357447] system 00:0e: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.357451] system 00:0e: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.357454] system 00:0e: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.357458] system 00:0e: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.357462] system 00:0e: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.357466] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.357469] system 00:0e: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.357473] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.357476] system 00:0e: [mem 0xff000000-0xffffffff] could not be reserved [ 0.357480] system 00:0e: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.357483] system 00:0e: [mem 0xaf810000-0xaf81ffff] has been reserved [ 0.357487] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.357782] system 00:0f: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.357787] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.357940] pnp: PnP ACPI: found 16 devices [ 0.357942] ACPI: bus type PNP unregistered [ 0.364897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.364903] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.364905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.364908] pci_bus 0000:00: resource 7 [mem 0xaf800000-0xfeafffff] [ 0.364938] NET: Registered protocol family 2 [ 0.365117] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.365196] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.365266] TCP: Hash tables configured (established 32768 bind 32768) [ 0.365289] TCP: reno registered [ 0.365298] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.365316] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.365365] NET: Registered protocol family 1 [ 0.365430] RPC: Registered named UNIX socket transport module. [ 0.365433] RPC: Registered udp transport module. [ 0.365435] RPC: Registered tcp transport module. [ 0.365437] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.365446] pci 0000:00:02.0: Boot video device [ 0.365538] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.365542] pci 0000:00:14.0: PCI INT A: no GSI [ 0.365633] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.365650] PCI: CLS 0 bytes, default 64 [ 0.881424] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.881433] software IO TLB [mem 0xa6f4e000-0xaaf4e000] (64MB) mapped at [ffff8800a6f4e000-ffff8800aaf4dfff] [ 0.881587] Simple Boot Flag at 0x47 set to 0x80 [ 0.882358] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.882387] audit: initializing netlink subsys (disabled) [ 0.882405] audit: type=2000 audit(979089451.837:1): initialized [ 0.914813] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.916664] VFS: Disk quotas dquot_6.5.2 [ 0.916707] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.917424] NFS: Registering the id_resolver key type [ 0.917440] Key type id_resolver registered [ 0.917442] Key type id_legacy registered [ 0.917447] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.917596] fuse init (API version 7.23) [ 0.917709] msgmni has been set to 7686 [ 0.917930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.917936] io scheduler noop registered [ 0.917938] io scheduler deadline registered [ 0.917971] io scheduler cfq registered (default) [ 0.918039] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.918089] efifb: probing for efifb [ 0.918516] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010800000, using 8100k, total 8100k [ 0.918520] efifb: mode is 1920x1080x32, linelength=7680, pages=2025 [ 0.918522] efifb: scrolling: redraw [ 0.918525] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.925255] Console: switching to colour frame buffer device 240x67 [ 0.931553] fb0: EFI VGA frame buffer device [ 0.931684] ACPI: Fan [FAN0] (off) [ 0.931733] ACPI: Fan [FAN1] (off) [ 0.931778] ACPI: Fan [FAN2] (off) [ 0.931824] ACPI: Fan [FAN3] (off) [ 0.931868] ACPI: Fan [FAN4] (off) [ 0.932277] Monitor-Mwait will be used to enter C-1 state [ 0.933704] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.933739] ACPI: Thermal Zone [TZ00] (39 C) [ 0.934487] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.934520] ACPI: Thermal Zone [TZ01] (39 C) [ 0.934587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.955292] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.955864] Non-volatile memory driver v1.3 [ 0.955890] Linux agpgart interface v0.103 [ 0.957264] brd: module loaded [ 0.957389] Loading iSCSI transport class v2.0-870. [ 0.957542] iscsi: registered transport (tcp) [ 0.957645] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.957687] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.957788] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k. [ 0.957863] iscsi: registered transport (qla4xxx) [ 0.957902] QLogic iSCSI HBA Driver [ 0.957947] DC390: clustering now enabled by default. If you get problems load [ 0.957985] with "disable_clustering=1" and report to maintainers [ 0.958045] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.958109] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.958149] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.958213] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.958263] osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.958381] SCSI Media Changer driver v0.25 [ 0.958429] ahci 0000:00:1f.2: version 3.0 [ 0.958547] ahci 0000:00:1f.2: irq 56 for MSI/MSI-X [ 0.958586] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode [ 0.958648] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.959133] scsi0 : ahci [ 0.959241] scsi1 : ahci [ 0.959344] scsi2 : ahci [ 0.959474] scsi3 : ahci [ 0.960888] ata1: DUMMY [ 0.962222] ata2: SATA max UDMA/133 abar m2048@0xc1037000 port 0xc1037180 irq 56 [ 0.963586] ata3: DUMMY [ 0.964936] ata4: DUMMY [ 0.967297] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 0.968720] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 0.970165] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.971663] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.973077] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.974482] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.975906] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.977308] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.978868] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.980307] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 1.145220] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.146651] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 [ 1.148095] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.149580] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.151040] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 1.152494] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.153973] usbcore: registered new interface driver catc [ 1.155419] usbcore: registered new interface driver kaweth [ 1.156837] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.158278] usbcore: registered new interface driver pegasus [ 1.159726] usbcore: registered new interface driver rtl8150 [ 1.161147] usbcore: registered new interface driver asix [ 1.162555] usbcore: registered new interface driver ax88179_178a [ 1.163957] usbcore: registered new interface driver cdc_ether [ 1.165357] usbcore: registered new interface driver dm9601 [ 1.166771] usbcore: registered new interface driver gl620a [ 1.168176] usbcore: registered new interface driver net1080 [ 1.169591] usbcore: registered new interface driver plusb [ 1.170979] usbcore: registered new interface driver rndis_host [ 1.172358] usbcore: registered new interface driver cdc_subset [ 1.173729] usbcore: registered new interface driver zaurus [ 1.175078] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.176426] usbcore: registered new interface driver cdc_ncm [ 1.177816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.179130] ehci-pci: EHCI PCI platform driver [ 1.180470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.181808] ohci-pci: OHCI PCI platform driver [ 1.183144] uhci_hcd: USB Universal Host Controller Interface driver [ 1.184593] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.185939] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 1.187289] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.188645] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.190039] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.190056] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X [ 1.190116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.191441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.192754] usb usb1: Product: xHCI Host Controller [ 1.194052] usb usb1: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ xhci_hcd [ 1.195373] usb usb1: SerialNumber: 0000:00:14.0 [ 1.196804] hub 1-0:1.0: USB hub found [ 1.198125] hub 1-0:1.0: 11 ports detected [ 1.202869] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.204205] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.205543] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.206841] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.208127] usb usb2: Product: xHCI Host Controller [ 1.209399] usb usb2: Manufacturer: Linux 3.15.0-rc3_drm-intel-nightly_0791a3_20140520+ xhci_hcd [ 1.210689] usb usb2: SerialNumber: 0000:00:14.0 [ 1.212101] hub 2-0:1.0: USB hub found [ 1.213421] hub 2-0:1.0: 4 ports detected [ 1.216153] usbcore: registered new interface driver usb-storage [ 1.217553] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.218897] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.220675] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.222142] mousedev: PS/2 mouse device common for all mice [ 1.223616] rtc_cmos 00:05: RTC can wake from S4 [ 1.225121] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.226489] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.227855] i2c /dev entries driver [ 1.229214] hidraw: raw HID events driver (C) Jiri Kosina [ 1.230748] usbcore: registered new interface driver usbhid [ 1.232081] usbhid: USB HID core driver [ 1.233466] TCP: cubic registered [ 1.234768] Initializing XFRM netlink socket [ 1.236075] NET: Registered protocol family 17 [ 1.237389] Key type dns_resolver registered [ 1.239098] registered taskstats version 1 [ 1.240899] Btrfs loaded [ 1.242444] Magic number: 1:540:255 [ 1.243824] PM: Hibernation image not present or could not be loaded. [ 1.243842] Warning: unable to open an initial console. [ 1.262429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.271538] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.284100] ata2.00: ATA-9: INTEL SSDSC2CW480A3, 400i, max UDMA/133 [ 1.285388] ata2.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.293992] ata2.00: configured for UDMA/133 [ 1.295413] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW48 400i PQ: 0 ANSI: 5 [ 1.296988] sd 1:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 1.297011] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.299837] sd 1:0:0:0: [sda] Write Protect is off [ 1.301242] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.301256] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.303559] sda: sda1 sda2 sda3 sda4 sda5 [ 1.305318] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.311272] Freeing unused kernel memory: 22752K (ffffffff81b66000 - ffffffff8319e000) [ 1.348831] dracut: dracut-018-35.git20120510.fc17 [ 1.379348] udevd[1406]: starting version 182 [ 1.396307] [drm] Initialized drm 1.1.0 20060810 [ 1.399405] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.403559] ACPI: Lid Switch [LID0] [ 1.406221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.408073] ACPI: Power Button [PWRB] [ 1.409878] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 1.411730] ACPI: Sleep Button [SLPB] [ 1.411813] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.412000] ACPI: Power Button [PWRF] [ 1.415052] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi, [ 1.415052] [drm:intel_detect_pch] This is Broadwell, assuming LynxPoint LP PCH [ 1.415551] [drm] Memory usable by graphics device = 4096M [ 1.415552] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.415553] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.415554] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 1.415556] checking generic (b0000000 7e9000) vs hw (b0000000 10000000) [ 1.415557] fb: switching to inteldrmfb from EFI VGA [ 1.427151] Console: switching to colour dummy device 80x25 [ 1.441416] [drm:intel_opregion_setup] graphic opregion physical addr: 0xab77b018 [ 1.441425] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.441426] [drm:intel_opregion_setup] SWSCI supported [ 1.446474] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.446475] [drm:intel_opregion_setup] ASLE supported [ 1.446556] i915 0000:00:02.0: irq 59 for MSI/MSI-X [ 1.446570] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.446574] [drm] Driver supports precise vblank timestamp query. [ 1.446577] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.446579] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.446582] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.446584] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.446586] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 1.446589] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.446592] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 1.446594] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 1.446597] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 1.446599] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.446602] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.446604] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.446606] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.446608] [drm:parse_mipi] No MIPI config BDB found [ 1.446611] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.446613] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.446615] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.446617] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 1.446619] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.446620] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 1.446691] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.446696] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ad800000 [ 1.446699] [drm:intel_display_power_get] enabling always-on [ 1.446700] [drm:intel_display_power_get] enabling display [ 1.446704] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.446764] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.446765] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.446767] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.446769] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.446771] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.446772] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.446774] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.446776] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.446777] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.446779] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.446781] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.446782] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.446784] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.446786] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.446787] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.446789] [drm:intel_modeset_init] 3 display pipes available. [ 1.446806] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz [ 1.447112] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.447167] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.447170] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.447173] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.447176] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.447179] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.447283] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 1.447290] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.447556] [drm:intel_dp_get_dpcd] DPCD: 12 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.447715] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1.447725] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.460829] random: nonblocking pool is initialized [ 1.467477] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.467479] [drm] VBT doesn't support DRRS [ 1.467517] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 937/937, sysfs interface registered [ 1.467530] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.467578] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.473468] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled [ 1.473471] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 1.473473] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled [ 1.473476] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000 [ 1.473481] [drm:intel_modeset_readout_hw_state] [ENCODER:13:TMDS-13] hw state readout: enabled, pipe A [ 1.473483] [drm:intel_modeset_readout_hw_state] [ENCODER:21:TMDS-21] hw state readout: disabled, pipe A [ 1.473485] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A [ 1.473488] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:eDP-1] hw state readout: enabled [ 1.473490] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:DP-1] hw state readout: disabled [ 1.473493] [drm:intel_modeset_readout_hw_state] [CONNECTOR:23:HDMI-A-1] hw state readout: disabled [ 1.473495] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:HDMI-A-2] hw state readout: disabled [ 1.473497] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 1.473499] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.473501] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.473503] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.473505] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.473507] [drm:intel_dump_pipe_config] requested mode: [ 1.473510] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 1.473511] [drm:intel_dump_pipe_config] adjusted mode: [ 1.473514] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.473517] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 1.473518] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.473520] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.473522] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.473524] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.473526] [drm:intel_dump_pipe_config] ips: 0 [ 1.473527] [drm:intel_dump_pipe_config] double wide: 0 [ 1.473529] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B [ 1.473531] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.473532] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.473534] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.473536] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.473538] [drm:intel_dump_pipe_config] requested mode: [ 1.473540] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.473541] [drm:intel_dump_pipe_config] adjusted mode: [ 1.473544] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.473546] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.473547] [drm:intel_dump_pipe_config] port clock: 0 [ 1.473549] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.473551] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.473553] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.473554] [drm:intel_dump_pipe_config] ips: 0 [ 1.473555] [drm:intel_dump_pipe_config] double wide: 0 [ 1.473557] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C [ 1.473559] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.473560] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.473562] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.473564] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.473565] [drm:intel_dump_pipe_config] requested mode: [ 1.473568] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.473569] [drm:intel_dump_pipe_config] adjusted mode: [ 1.473571] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.473574] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.473575] [drm:intel_dump_pipe_config] port clock: 0 [ 1.473577] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.473578] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.473580] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.473581] [drm:intel_dump_pipe_config] ips: 0 [ 1.473583] [drm:intel_dump_pipe_config] double wide: 0 [ 1.473589] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 1.473592] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 1.473594] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 1.473596] [drm:check_encoder_state] [ENCODER:24:TMDS-24] [ 1.473598] [drm:check_crtc_state] [CRTC:5] [ 1.473605] [drm:check_crtc_state] [CRTC:8] [ 1.473607] [drm:check_crtc_state] [CRTC:11] [ 1.473613] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.473615] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.473620] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.473624] [drm:intel_alloc_plane_obj] plane fb obj ffff8800a6970000 [ 1.473627] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.473629] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.476717] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted) [ 1.476719] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted) [ 1.476722] [drm:i915_gem_context_init] HW context support initialized [ 1.476740] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 1.476819] [drm:init_pipe_control] render ring pipe control offset: 0x0081c000 [ 1.476824] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 1.476888] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 1.476945] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 1.477179] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] [ 1.477181] [drm:intel_dp_detect] [CONNECTOR:14:eDP-1] [ 1.477358] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.477524] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.477533] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.477537] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:eDP-1] probed modes : [ 1.477541] [drm:drm_mode_debug_printmodeline] Modeline 15:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.477543] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] [ 1.477545] [drm:intel_dp_detect] [CONNECTOR:22:DP-1] [ 1.477550] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:DP-1] disconnected [ 1.477551] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] [ 1.477553] [drm:intel_hdmi_detect] [CONNECTOR:23:HDMI-A-1] [ 1.477706] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.477708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.477710] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:23:HDMI-A-1] disconnected [ 1.477711] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] [ 1.477713] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-2] [ 1.477871] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.477872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.477874] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-2] disconnected [ 1.477876] [drm:drm_setup_crtcs] [ 1.477878] [drm:drm_enable_connectors] connector 14 enabled? yes [ 1.477879] [drm:drm_enable_connectors] connector 22 enabled? no [ 1.477881] [drm:drm_enable_connectors] connector 23 enabled? no [ 1.477882] [drm:drm_enable_connectors] connector 25 enabled? no [ 1.477885] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.477886] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 [ 1.477889] [drm:intel_fb_initial_config] connector eDP-1 on pipe 65 [CRTC:5]: 1920x1080 [ 1.477890] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.477892] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.477893] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.477895] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 5 [ 1.477897] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.477899] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.477906] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 1.479237] [drm:intelfb_create] allocated 1920x1080 fb: 0x00880000, bo ffff880002ae4000 [ 1.479313] fbcon: inteldrmfb (fb0) is primary device [ 1.479364] [drm:intel_crtc_cursor_set] cursor off [ 1.479367] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 1.479369] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.479373] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.479376] [drm:drm_mode_debug_printmodeline] Modeline 27:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.479377] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 1.479379] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 1.479382] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.479384] [drm:connected_sink_compute_bpp] [CONNECTOR:14:eDP-1] checking for sink bpp constrains [ 1.479387] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 138780KHz [ 1.479388] [drm:intel_dp_compute_config] forcing lane count to max (2) on BDW [ 1.479389] [drm:intel_dp_compute_config] using min 06 link bw per VBT [ 1.479396] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 1.479397] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 1.479399] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.479401] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 1.479401] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.479402] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.479404] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.479406] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 1.479407] [drm:intel_dump_pipe_config] requested mode: [ 1.479409] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.479410] [drm:intel_dump_pipe_config] adjusted mode: [ 1.479411] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 1.479413] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 1.479414] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.479415] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.479416] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.479418] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.479419] [drm:intel_dump_pipe_config] ips: 1 [ 1.479420] [drm:intel_dump_pipe_config] double wide: 0 [ 1.491454] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.491460] [drm:intel_edp_backlight_off] [ 1.507597] [drm:intel_edp_panel_off] Turn eDP power off [ 1.555448] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 1.692381] [drm:wait_panel_off] Wait for panel power off time [ 1.692385] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000 [ 1.722722] usb 1-1: New USB device found, idVendor=046d, idProduct=c05b [ 1.722723] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.722725] usb 1-1: Product: USB Optical Mouse [ 1.722726] usb 1-1: Manufacturer: Logitech [ 1.722813] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.724803] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C05B.0001/input/input5 [ 1.724928] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0 [ 1.747357] [drm:wait_panel_status] Wait complete [ 1.747361] [drm:intel_update_fbc] no output, disabling [ 1.747363] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 1.747367] [drm:intel_display_power_put] disabling display [ 1.747368] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.747380] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680 [ 1.747385] [drm:intel_edp_panel_on] Turn eDP power on [ 1.747388] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.877331] usb 1-2: new low-speed USB device number 3 using xhci_hcd [ 1.882320] tsc: Refined TSC clocksource calibration: 1795.845 MHz [ 2.049393] usb 1-2: New USB device found, idVendor=04ca, idProduct=0027 [ 2.049394] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.049396] usb 1-2: Product: USB Multimedia Keyboard [ 2.049397] usb 1-2: Manufacturer: Lite-On Technology Corp. [ 2.049480] usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 2.049484] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.053197] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04CA:0027.0002/input/input6 [ 2.053307] hid-generic 0003:04CA:0027.0002: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:14.0-2/input0 [ 2.060870] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04CA:0027.0003/input/input7 [ 2.061018] hid-generic 0003:04CA:0027.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:14.0-2/input1 [ 2.213209] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 2.293167] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 2.293169] [drm:wait_panel_status] Wait complete [ 2.293172] [drm:wait_panel_on] Wait for panel power on [ 2.293175] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 2.398272] usb 1-6: New USB device found, idVendor=0b95, idProduct=7720 [ 2.398274] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.398275] usb 1-6: Product: AX88772 [ 2.398276] usb 1-6: SerialNumber: 00C767 [ 2.502087] [drm:wait_panel_status] Wait complete [ 2.502090] [drm:_edp_panel_vdd_on] Turning eDP VDD on [ 2.502096] [drm:_edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.503155] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.503602] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.504040] [drm:intel_dp_start_link_train] clock recovery OK [ 2.504790] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.504990] [drm:intel_edp_backlight_on] [ 2.504993] [drm:intel_panel_enable_backlight] pipe A [ 2.504998] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.505000] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 2.524077] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 2.524078] [drm:intel_edp_psr_match_conditions] PSR disable by flag [ 2.524081] [drm:intel_connector_check_state] [CONNECTOR:14:eDP-1] [ 2.524084] [drm:check_encoder_state] [ENCODER:13:TMDS-13] [ 2.524086] [drm:check_encoder_state] [ENCODER:21:TMDS-21] [ 2.524087] [drm:check_encoder_state] [ENCODER:24:TMDS-24] [ 2.524088] [drm:check_crtc_state] [CRTC:5] [ 2.524095] [drm:check_crtc_state] [CRTC:8] [ 2.524096] [drm:check_crtc_state] [CRTC:11] [ 2.524098] [drm:intel_crtc_cursor_set] cursor off [ 2.524099] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.524101] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.524103] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.524104] [drm:intel_crtc_cursor_set] cursor off [ 2.524105] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.524106] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.524107] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.524111] Console: switching to colour frame buffer device 240x67 [ 2.524118] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 2.524120] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.524121] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.531987] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.532021] i915 0000:00:02.0: registered panic notifier [ 2.538566] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.539176] acpi device:16: registered as cooling_device9 [ 2.539359] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 2.539555] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.701551] asix 1-6:1.0 eth1: register 'asix' at usb-0000:00:14.0-6, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:8b:d4 [ 2.706208] dracut: Starting plymouth daemon [ 2.713685] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 2.713688] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.713690] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723553] [drm:i915_gem_open] [ 2.723579] [drm:intel_crtc_cursor_set] cursor off [ 2.723582] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 2.723586] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.723588] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723591] [drm:intel_crtc_cursor_set] cursor off [ 2.723593] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.723595] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.723597] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723598] [drm:intel_crtc_cursor_set] cursor off [ 2.723600] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.723602] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.723604] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723614] [drm:i915_gem_open] [ 2.723623] [drm:intel_crtc_cursor_set] cursor off [ 2.723626] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 2.723628] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.723630] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723631] [drm:intel_crtc_cursor_set] cursor off [ 2.723633] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.723634] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.723636] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723638] [drm:intel_crtc_cursor_set] cursor off [ 2.723639] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.723641] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.723643] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723649] [drm:i915_gem_open] [ 2.723903] [drm:intel_crtc_cursor_set] cursor off [ 2.723907] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 2.723911] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.723914] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723916] [drm:intel_crtc_cursor_set] cursor off [ 2.723919] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 2.723921] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 2.723924] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.723927] [drm:intel_crtc_cursor_set] cursor off [ 2.723929] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 2.723932] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 2.723935] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.724113] dracut: error: unexpectedly disconnected from boot status daemon [ 2.729663] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 2.729667] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.729668] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.746007] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.796986] ACPI: AC Adapter [ADP1] (on-line) [ 2.832032] ACPI: Battery Slot [BAT0] (battery present) [ 2.832132] ACPI: Battery Slot [BAT1] (battery absent) [ 2.832292] ACPI: Battery Slot [BAT2] (battery absent) [ 2.843392] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.845423] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 2.850862] [drm:intel_display_power_get] enabling display [ 2.850868] [drm:hsw_set_power_well] Enabling power well [ 2.850909] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X [ 2.850991] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.854881] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258) [ 2.858586] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.864578] iTCO_vendor_support: vendor-support=0 [ 2.866292] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 2.868151] ppdev: user-space parallel port driver [ 2.873758] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.877594] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 2.880535] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.884181] Switched to clocksource tsc [ 2.888811] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 2.888816] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 2.888818] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 2.907623] dracut: Checking ext4: /dev/sda4 [ 2.909936] dracut: issuing e2fsck -a /dev/sda4 [ 2.916918] dracut: /dev/sda4: clean, 293847/3276800 files, 6113423/13107200 blocks [ 2.919544] dracut: Remounting /dev/sda4 with -o ro [ 2.925397] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 2.931337] dracut: Mounted root filesystem /dev/sda4 [ 2.944745] device-mapper: uevent: version 1.0.3 [ 2.947050] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.976061] dracut: Switching root [ 3.016068] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 3.028797] systemd[1]: Failed to insert module 'ipv6' [ 3.031855] systemd[1]: Set hostname to . [ 3.049302] LVM: Logical Volume autoactivation enabled. [ 3.051498] LVM: Activation generator successfully completed. [ 3.089480] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 3.091753] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.094017] systemd[1]: Starting Syslog Socket. [ 3.098413] systemd[1]: Listening on Syslog Socket. [ 3.101236] systemd[1]: Starting Replay Read-Ahead Data... [ 3.105885] systemd[1]: Starting Collect Read-Ahead Data... [ 3.107253] systemd-readahead[2786]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 3.112697] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 3.113775] systemd-readahead[2787]: Failed to create fanotify object: Function not implemented [ 3.119694] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.121894] systemd[1]: Starting Delayed Shutdown Socket. [ 3.126084] systemd[1]: Listening on Delayed Shutdown Socket. [ 3.128122] systemd[1]: Starting Encrypted Volumes. [ 3.132179] systemd[1]: Reached target Encrypted Volumes. [ 3.134235] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 3.138532] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.140657] systemd[1]: Starting Journal Socket. [ 3.144873] systemd[1]: Listening on Journal Socket. [ 3.146998] systemd[1]: Mounting Huge Pages File System... [ 3.151467] systemd[1]: Starting Create static device nodes in /dev... [ 3.155908] systemd[1]: Mounting Debug File System... [ 3.160919] systemd[1]: Starting Journal Service... [ 3.168251] systemd[1]: Started Journal Service. [ 3.168760] systemd-journald[2796]: Vacuuming done, freed 0 bytes [ 3.172430] systemd[1]: Starting udev Kernel Socket. [ 3.176497] systemd[1]: Listening on udev Kernel Socket. [ 3.178564] systemd[1]: Starting udev Control Socket. [ 3.182445] systemd[1]: Listening on udev Control Socket. [ 3.184376] systemd[1]: Starting udev Coldplug all Devices... [ 3.188489] systemd[1]: Mounting POSIX Message Queue File System... [ 3.192593] systemd[1]: Starting LVM2 metadata daemon socket. [ 3.197644] systemd[1]: Listening on LVM2 metadata daemon socket. [ 3.199959] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 3.203810] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.205743] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.210024] systemd[1]: Expecting device dev-disk-by\x2duuid-e6db7738\x2df583\x2d46c8\x2daabd\x2db0e9707eda78.device... [ 3.215096] systemd[1]: Mounting Temporary Directory... [ 3.220576] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 3.222850] systemd[1]: Expecting device dev-disk-by\x2duuid-0C15\x2d74A5.device... [ 3.226840] systemd[1]: Expecting device dev-disk-by\x2duuid-a291a9da\x2d8415\x2d427b\x2d8d61\x2df9604c4ff135.device... [ 3.230948] systemd[1]: Expecting device dev-disk-by\x2duuid-e619ec80\x2d70b6\x2d4149\x2daccf\x2d496f9d901c09.device... [ 3.237605] systemd[1]: Started Replay Read-Ahead Data. [ 3.239799] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 3.244213] systemd[1]: Started Collect Read-Ahead Data. [ 3.248600] systemd[1]: Mounted Huge Pages File System. [ 3.253107] systemd[1]: Started Create static device nodes in /dev. [ 3.257460] systemd[1]: Mounted Debug File System. [ 3.262097] systemd[1]: Mounted POSIX Message Queue File System. [ 3.266331] systemd[1]: Mounted Temporary Directory. [ 3.268985] systemd[1]: Starting udev Kernel Device Manager... [ 3.275031] systemd[1]: Starting Load legacy module configuration... [ 3.277065] systemd-udevd[3596]: starting version 204 [ 3.286498] systemd[1]: Started File System Check on Root Device. [ 3.290305] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.299168] systemd[1]: Started Set Up Additional Binary Formats. [ 3.301862] systemd[1]: Starting Apply Kernel Variables... [ 3.305065] EXT4-fs (sda4): re-mounted. Opts: (null) [ 3.312357] systemd[1]: Starting Setup Virtual Console... [ 3.318685] systemd[1]: Started Load Kernel Modules. [ 3.320857] systemd[1]: Mounted Configuration File System. [ 3.322873] systemd[1]: Mounting FUSE Control File System... [ 3.332609] systemd[1]: Started udev Kernel Device Manager. [ 3.337575] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 3.337578] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 3.337579] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 3.347885] systemd[1]: Mounted FUSE Control File System. [ 3.350734] systemd[1]: Starting LVM2 metadata daemon... [ 3.359842] systemd[1]: Started udev Coldplug all Devices. [ 3.366031] systemd[1]: Started Load legacy module configuration. [ 3.372196] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 3.378145] systemd[1]: Started Remount Root and Kernel File Systems. [ 3.384119] systemd[1]: Started Apply Kernel Variables. [ 3.390574] systemd[1]: Started Setup Virtual Console. [ 3.396923] systemd[1]: Started LVM2 metadata daemon. [ 3.400535] systemd[1]: Starting Local File Systems (Pre). [ 3.406507] systemd[1]: Reached target Local File Systems (Pre). [ 3.410006] systemd[1]: Started Import network configuration from initramfs. [ 3.413500] systemd[1]: Starting Configure read-only root support... [ 3.421172] systemd[1]: Starting Show Plymouth Boot Screen... [ 3.431716] systemd[1]: Starting Sound Card. [ 3.439029] systemd[1]: Reached target Sound Card. [ 3.447588] systemd-udevd[3818]: renamed network interface eth0 to enp0s25 [ 3.450789] systemd[1]: Started Configure read-only root support. [ 3.454742] systemd[1]: Starting Load Random Seed... [ 3.462799] systemd-udevd[3802]: renamed network interface eth1 to enp0s20u6 [ 3.492788] Adding 4079612k swap on /dev/sda3. Priority:-1 extents:1 across:4079612k SS [ 3.514348] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 3.522743] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3.526800] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 3.540367] audit: type=1305 audit(979089454.496:2): audit_pid=3891 old=0 auid=4294967295 ses=4294967295 res=1 [ 4.457378] [drm:edp_panel_vdd_off_sync] Turning eDP VDD off [ 4.457387] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 4.575428] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 4.676323] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X [ 6.392968] asix 1-6:1.0 enp0s20u6: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 8.131358] systemd-journald[2796]: Received request to flush runtime journal from PID 1 [ 8.169934] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 8.169939] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 8.169941] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 246.157436] [drm:i915_gem_open] [ 246.157480] [drm:intel_crtc_cursor_set] cursor off [ 246.157483] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 246.157487] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 246.157490] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 246.157492] [drm:intel_crtc_cursor_set] cursor off [ 246.157494] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 246.157497] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 246.157499] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 246.157500] [drm:intel_crtc_cursor_set] cursor off [ 246.157502] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 246.157504] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 246.157506] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 246.157516] [drm:i915_gem_open] [ 246.157525] [drm:intel_crtc_cursor_set] cursor off [ 246.157527] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 246.157529] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 246.157531] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 246.157533] [drm:intel_crtc_cursor_set] cursor off [ 246.157534] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 246.157536] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 246.157538] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 246.157540] [drm:intel_crtc_cursor_set] cursor off [ 246.157541] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 246.157543] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 246.157545] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 246.157550] [drm:i915_gem_open] [ 246.157843] [drm:i915_gem_open] [ 246.157855] [drm:i915_gem_open] [ 284.539007] [drm:i915_ring_stop_set] Stopping rings 0x400000ff [ 291.646061] [drm] stuck on render ring [ 291.648356] [drm] GPU HANG: ecode 0:0xeeffef6b, in pm_rps [5637], reason: Ring hung, action: reset [ 291.648412] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 291.648481] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 291.648547] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 291.648613] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 291.648675] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 291.648794] [drm:i915_error_work_func] resetting chip [ 291.649206] [drm] Simulated gpu hang, resetting stop_rings [ 291.649243] [drm:init_status_page] render ring hws offset: 0x007fb000 [ 291.649254] [drm:init_status_page] bsd ring hws offset: 0x0081d000 [ 291.649262] [drm:init_status_page] blitter ring hws offset: 0x0083e000 [ 291.649269] [drm:init_status_page] video enhancement ring hws offset: 0x0085f000 [ 291.649292] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B [ 291.649294] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C [ 291.649368] [drm:ironlake_update_primary_plane] Writing base 00880000 00000000 0 0 7680 [ 291.742161] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 306.935584] [drm:i915_gem_open] [ 306.935612] [drm:i915_gem_open] [ 342.755496] [drm:intel_crtc_cursor_set] cursor off [ 342.755502] [drm:intel_crtc_set_config] [CRTC:5] [FB:28] #connectors=1 (x y) (0 0) [ 342.755506] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 342.755509] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 342.755512] [drm:intel_crtc_cursor_set] cursor off [ 342.755513] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 342.755515] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 342.755517] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5] [ 342.755519] [drm:intel_crtc_cursor_set] cursor off [ 342.755521] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 342.755523] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 342.755524] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:eDP-1] to [CRTC:5]