[ 0.829260] usbcore: registered new interface driver kaweth [ 0.829355] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.829543] usbcore: registered new interface driver pegasus [ 0.829664] usbcore: registered new interface driver rtl8150 [ 0.829790] usbcore: registered new interface driver asix [ 0.829912] usbcore: registered new interface driver ax88179_178a [ 0.830034] usbcore: registered new interface driver cdc_ether [ 0.830155] usbcore: registered new interface driver dm9601 [ 0.830277] usbcore: registered new interface driver gl620a [ 0.830400] usbcore: registered new interface driver net1080 [ 0.830528] usbcore: registered new interface driver plusb [ 0.830651] usbcore: registered new interface driver rndis_host [ 0.830773] usbcore: registered new interface driver cdc_subset [ 0.830894] usbcore: registered new interface driver zaurus [ 0.831016] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.831193] usbcore: registered new interface driver cdc_ncm [ 0.831435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.831535] ehci-pci: EHCI PCI platform driver [ 0.831687] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.831843] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.832002] ehci-pci 0000:00:1a.0: debug port 2 [ 0.835991] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.835999] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000 [ 0.841443] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.841556] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.841654] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.841805] usb usb1: Product: EHCI Host Controller [ 0.841900] usb usb1: Manufacturer: Linux 3.14.0_drm-intel-next-queued_f68918_20140424+ ehci_hcd [ 0.842053] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.842268] hub 1-0:1.0: USB hub found [ 0.842363] hub 1-0:1.0: 2 ports detected [ 0.842578] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.842734] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.842900] ehci-pci 0000:00:1d.0: debug port 2 [ 0.846890] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.846899] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ 0.852448] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.852555] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.852654] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.852804] usb usb2: Product: EHCI Host Controller [ 0.852899] usb usb2: Manufacturer: Linux 3.14.0_drm-intel-next-queued_f68918_20140424+ ehci_hcd [ 0.853052] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.853261] hub 2-0:1.0: USB hub found [ 0.853355] hub 2-0:1.0: 2 ports detected [ 0.853564] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.853662] ohci-pci: OHCI PCI platform driver [ 0.853785] uhci_hcd: USB Universal Host Controller Interface driver [ 0.853980] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.854136] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.854360] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.854372] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X [ 0.854407] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.854523] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.854670] usb usb3: Product: xHCI Host Controller [ 0.854764] usb usb3: Manufacturer: Linux 3.14.0_drm-intel-next-queued_f68918_20140424+ xhci_hcd [ 0.854913] usb usb3: SerialNumber: 0000:00:14.0 [ 0.855124] hub 3-0:1.0: USB hub found [ 0.855231] hub 3-0:1.0: 15 ports detected [ 0.857504] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.857671] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.857842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.857939] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.858086] usb usb4: Product: xHCI Host Controller [ 0.858179] usb usb4: Manufacturer: Linux 3.14.0_drm-intel-next-queued_f68918_20140424+ xhci_hcd [ 0.858328] usb usb4: SerialNumber: 0000:00:14.0 [ 0.858543] hub 4-0:1.0: USB hub found [ 0.858644] hub 4-0:1.0: 6 ports detected [ 0.860879] usbcore: registered new interface driver usb-storage [ 0.861076] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.864095] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.864189] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.864467] mousedev: PS/2 mouse device common for all mice [ 0.864696] rtc_cmos 00:06: RTC can wake from S4 [ 0.864918] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.865036] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.865227] i2c /dev entries driver [ 0.865417] hidraw: raw HID events driver (C) Jiri Kosina [ 0.866118] usbcore: registered new interface driver usbhid [ 0.866221] usbhid: USB HID core driver [ 0.866393] TCP: cubic registered [ 0.866504] Initializing XFRM netlink socket [ 0.866600] NET: Registered protocol family 17 [ 0.866704] Key type dns_resolver registered [ 0.867322] registered taskstats version 1 [ 0.867690] bio: create slab at 1 [ 0.868087] Btrfs loaded [ 0.868420] Magic number: 10:795:517 [ 0.868608] PM: Hibernation image not present or could not be loaded. [ 0.868616] Warning: unable to open an initial console. [ 0.961533] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.961648] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.962519] ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133 [ 0.962620] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.963627] ata1.00: configured for UDMA/133 [ 0.963911] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5 [ 0.964423] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.964635] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.964721] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.964799] ata3.00: ATAPI: PLDS DVD+/-RW DH-16AES, 3D11, max UDMA/100 [ 0.965003] sd 0:0:0:0: [sda] Write Protect is off [ 0.965099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.965104] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.965727] ata3.00: configured for UDMA/100 [ 0.967834] scsi 2:0:0:0: CD-ROM PLDS DVD+-RW DH-16AES 3D11 PQ: 0 ANSI: 5 [ 0.981706] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.981860] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.982401] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.982608] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.998005] sda: sda1 sda2 sda3 [ 0.998459] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.001077] Freeing unused kernel memory: 22724K (ffffffff81b52000 - ffffffff83183000) [ 1.021490] dracut: dracut-018-35.git20120510.fc17 [ 1.037194] udevd[1330]: starting version 182 [ 1.045622] [drm] Initialized drm 1.1.0 20060810 [ 1.046203] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 1.046612] ACPI: Power Button [PWRB] [ 1.046884] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.047335] ACPI: Power Button [PWRF] [ 1.049601] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0412 flags=need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.049691] [drm:intel_detect_pch] Found LynxPoint PCH [ 1.049805] [drm] Memory usable by graphics device = 2048M [ 1.049901] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.049902] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.060542] [drm:intel_opregion_setup] graphic opregion physical addr: 0xda7f9018 [ 1.060549] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.060549] [drm:intel_opregion_setup] SWSCI supported [ 1.066587] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 1.066589] [drm:intel_opregion_setup] ASLE supported [ 1.066633] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 1.066639] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.066738] [drm] Driver supports precise vblank timestamp query. [ 1.066836] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.066838] [drm:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL d [ 1.066839] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.066840] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.066841] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 1.066843] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.066845] [drm:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 25180 640 648 744 784 480 482 484 509 0x8 0xa [ 1.066846] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 1.066847] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active low, min brightness 10, level 255 [ 1.066848] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.066850] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.066851] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.066852] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.066853] [drm:parse_mipi] No MIPI config BDB found [ 1.066855] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.066856] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6 [ 1.066857] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.066857] [drm:parse_ddi_port] VBT HDMI level shift for port D: 6 [ 1.066865] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.066870] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at dd200000 [ 1.066872] [drm:intel_display_power_get] enabling always-on [ 1.066873] [drm:intel_display_power_get] enabling display [ 1.066875] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.067063] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.067064] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 1.067065] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec) [ 1.067066] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec) [ 1.067067] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.067068] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.067068] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 1.067069] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec) [ 1.067070] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec) [ 1.067071] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.067072] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.067073] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 1.067073] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec) [ 1.067074] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec) [ 1.067075] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.067076] [drm:intel_modeset_init] 3 display pipes available. [ 1.067087] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz [ 1.067505] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010 [ 1.067509] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.067734] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [ 1.067932] [drm:intel_dp_init_connector] Adding DP connector on port D [ 1.067991] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-2 [ 1.069696] [drm:intel_modeset_readout_hw_state] [CRTC:5] hw state readout: enabled [ 1.069698] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: disabled [ 1.069700] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled [ 1.069701] [drm:intel_ddi_get_crtc_pll] Pipe A connected to port E using clock 0x60000000 [ 1.069705] [drm:intel_modeset_readout_hw_state] [ENCODER:14:DAC-14] hw state readout: enabled, pipe A [ 1.069706] [drm:intel_modeset_readout_hw_state] [ENCODER:15:TMDS-15] hw state readout: disabled, pipe A [ 1.069708] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A [ 1.069709] [drm:intel_modeset_readout_hw_state] [CONNECTOR:13:VGA-1] hw state readout: enabled [ 1.069710] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:DP-1] hw state readout: disabled [ 1.069712] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: disabled [ 1.069713] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:DP-2] hw state readout: disabled [ 1.069714] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:HDMI-A-2] hw state readout: disabled [ 1.069716] [drm:intel_dump_pipe_config] [CRTC:5][setup_hw_state] config for pipe A [ 1.069717] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.069718] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.069719] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64 [ 1.069720] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.069721] [drm:intel_dump_pipe_config] requested mode: [ 1.069723] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 1.069723] [drm:intel_dump_pipe_config] adjusted mode: [ 1.069725] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6 [ 1.069726] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6 [ 1.069727] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.069728] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 1.069729] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.069730] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled [ 1.069730] [drm:intel_dump_pipe_config] ips: 0 [ 1.069731] [drm:intel_dump_pipe_config] double wide: 0 [ 1.069733] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe B [ 1.069733] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.069734] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.069735] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.069736] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.069737] [drm:intel_dump_pipe_config] requested mode: [ 1.069738] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.069739] [drm:intel_dump_pipe_config] adjusted mode: [ 1.069740] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.069741] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.069742] [drm:intel_dump_pipe_config] port clock: 0 [ 1.069743] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.069743] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.069744] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.069745] [drm:intel_dump_pipe_config] ips: 0 [ 1.069746] [drm:intel_dump_pipe_config] double wide: 0 [ 1.069747] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe C [ 1.069748] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.069748] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.069749] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.069750] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.069751] [drm:intel_dump_pipe_config] requested mode: [ 1.069752] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.069753] [drm:intel_dump_pipe_config] adjusted mode: [ 1.069754] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.069755] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.069756] [drm:intel_dump_pipe_config] port clock: 0 [ 1.069757] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.069758] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.069758] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.069759] [drm:intel_dump_pipe_config] ips: 0 [ 1.069760] [drm:intel_dump_pipe_config] double wide: 0 [ 1.069763] [drm:intel_connector_check_state] [CONNECTOR:13:VGA-1] [ 1.069765] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 1.069767] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 1.069768] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 1.069769] [drm:check_crtc_state] [CRTC:5] [ 1.069777] [drm:check_crtc_state] [CRTC:8] [ 1.069778] [drm:check_crtc_state] [CRTC:11] [ 1.069781] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 4096, size 0x190000 [ 1.069782] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=190000 [ 1.069784] [drm:i915_pages_create_for_stolen] offset=0x0, size=1638400 [ 1.069786] [drm:intel_alloc_plane_obj] plane fb obj ffff8800dbb88000 [ 1.069788] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 190000 [ 1.069789] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [190000, 7ffff000] [ 1.070773] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 1b0 [ 1.070775] [drm:i915_gem_context_init] HW context support initialized [ 1.070779] [drm:init_status_page] render ring hws offset: 0x003b0000 [ 1.072557] [drm:init_pipe_control] render ring pipe control offset: 0x003d1000 [ 1.072561] [drm:init_status_page] bsd ring hws offset: 0x003d2000 [ 1.072607] [drm:init_status_page] blitter ring hws offset: 0x003f3000 [ 1.072645] [drm:init_status_page] video enhancement ring hws offset: 0x00414000 [ 1.072805] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] [ 1.072807] [drm:intel_crt_detect] [CONNECTOR:13:VGA-1] force=1 [ 1.072809] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40010 [ 1.082582] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1 [ 1.082584] [drm:intel_crt_detect] CRT detected via hotplug [ 1.107644] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.107798] Raw EDID: [ 1.107889] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.107985] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.108082] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.108178] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.108274] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.108370] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.108466] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.108568] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.120934] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.121087] Raw EDID: [ 1.121178] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.121275] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.121371] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.121467] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.121571] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.121667] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.121763] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.121859] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.134224] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.134378] Raw EDID: [ 1.134470] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.134574] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.134670] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.134766] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.134863] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.134959] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.135056] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.135152] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.144608] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.147490] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.147649] Raw EDID: [ 1.147740] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.147833] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.147929] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.148024] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.148119] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.148213] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.148307] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.148403] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.148499] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 1.149606] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1) [ 1.149609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.149611] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.149613] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.225683] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.225833] Raw EDID: [ 1.225922] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.226017] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.226111] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.226206] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.226309] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.226404] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.226500] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.226599] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.258936] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.259056] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.259514] hub 1-1:1.0: USB hub found [ 1.259808] hub 1-1:1.0: 6 ports detected [ 1.264405] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.264553] Raw EDID: [ 1.264657] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.264751] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.264843] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.264936] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.265029] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.265122] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.265215] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.265307] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.302941] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.303090] Raw EDID: [ 1.303179] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.303273] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.303368] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.303461] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.303556] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.303666] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.303761] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.303855] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.341596] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.341758] Raw EDID: [ 1.341847] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.341942] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.342036] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.342131] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.342224] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.342318] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.342413] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.342507] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.342603] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 1.343080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.343081] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.343087] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] probed modes : [ 1.343089] [drm:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.343090] [drm:drm_mode_debug_printmodeline] Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.343091] [drm:drm_mode_debug_printmodeline] Modeline 25:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.343093] [drm:drm_mode_debug_printmodeline] Modeline 27:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 1.343094] [drm:drm_mode_debug_printmodeline] Modeline 24:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 1.343095] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] [ 1.343097] [drm:intel_dp_detect] [CONNECTOR:16:DP-1] [ 1.343099] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] disconnected [ 1.343100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] [ 1.343101] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 1.343263] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.343264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.343264] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] disconnected [ 1.343265] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] [ 1.343266] [drm:intel_dp_detect] [CONNECTOR:21:DP-2] [ 1.343268] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] disconnected [ 1.343269] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] [ 1.343270] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-2] [ 1.343422] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.343423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 1.343424] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] disconnected [ 1.343425] [drm:drm_setup_crtcs] [ 1.343426] [drm:drm_enable_connectors] connector 13 enabled? yes [ 1.343427] [drm:drm_enable_connectors] connector 16 enabled? no [ 1.343427] [drm:drm_enable_connectors] connector 19 enabled? no [ 1.343428] [drm:drm_enable_connectors] connector 21 enabled? no [ 1.343429] [drm:drm_enable_connectors] connector 22 enabled? no [ 1.343430] [drm:intel_fb_initial_config] looking for cmdline mode on connector 13 [ 1.343431] [drm:intel_fb_initial_config] looking for preferred mode on connector 13 [ 1.343432] [drm:intel_fb_initial_config] connector VGA-1 on crtc 5: [ 1.343433] [drm:intel_fb_initial_config] connector 16 not enabled, skipping [ 1.343433] [drm:intel_fb_initial_config] connector 19 not enabled, skipping [ 1.343434] [drm:intel_fb_initial_config] connector 21 not enabled, skipping [ 1.343434] [drm:intel_fb_initial_config] connector 22 not enabled, skipping [ 1.343435] [drm:drm_setup_crtcs] desired mode set on crtc 5 [ 1.343437] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.343438] [drm:i915_gem_object_create_stolen] creating stolen object: size=11a000 [ 1.343439] [drm:i915_pages_create_for_stolen] offset=0x190000, size=1155072 [ 1.343603] [drm:intelfb_create] allocated 720x400 fb: 0x00435000, bo ffff8800dbb00a80 [ 1.343809] fbcon: inteldrmfb (fb0) is primary device [ 1.344952] [drm:intel_crtc_cursor_set] cursor off [ 1.344954] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 1.344955] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.344956] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.344958] [drm:drm_mode_debug_printmodeline] Modeline 29:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 1.344958] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 1.344959] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.344960] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.344962] [drm:connected_sink_compute_bpp] [CONNECTOR:13:VGA-1] checking for sink bpp constrains [ 1.344963] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 1.344964] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.344964] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 1.344965] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.344965] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.344966] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 1319761, gmch_n: 4194304, link_m: 54990, link_n: 524288, tu: 64 [ 1.344967] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.344967] [drm:intel_dump_pipe_config] requested mode: [ 1.344969] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 1.344969] [drm:intel_dump_pipe_config] adjusted mode: [ 1.344970] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 1.344971] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6 [ 1.344971] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.344972] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 1.344972] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.344973] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.344973] [drm:intel_dump_pipe_config] ips: 0 [ 1.344974] [drm:intel_dump_pipe_config] double wide: 0 [ 1.362761] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.364728] [drm:intel_update_fbc] no output, disabling [ 1.364734] [drm:intel_ddi_put_crtc_pll] Disabling SPLL [ 1.364735] [drm:intel_ddi_pll_select] Using SPLL on pipe A [ 1.364769] [drm:ironlake_update_primary_plane] Writing base 00435000 00000000 0 0 2880 [ 1.364772] [drm:intel_crtc_mode_set] [ENCODER:14:DAC-14] set [MODE:0:] [ 1.365646] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 1.365754] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 28319KHz refresh rate: auxdiv=0, divsel=5d, phasedir=0, phaseinc=15 [ 1.383719] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 1.383724] [drm:intel_connector_check_state] [CONNECTOR:13:VGA-1] [ 1.383727] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 1.383728] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 1.383729] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 1.383730] [drm:check_crtc_state] [CRTC:5] [ 1.383739] [drm:check_crtc_state] [CRTC:8] [ 1.383740] [drm:check_crtc_state] [CRTC:11] [ 1.383742] [drm:intel_crtc_cursor_set] cursor off [ 1.383743] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 1.383745] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 1.383746] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.383747] [drm:intel_crtc_cursor_set] cursor off [ 1.383747] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 1.383748] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 1.383749] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.383758] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 1.383759] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 1.383760] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.384537] Console: switching to colour frame buffer device 90x25 [ 1.384538] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 1.384539] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 1.384540] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.385723] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.385875] i915 0000:00:02.0: registered panic notifier [ 1.391479] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.391849] [drm:asle_set_backlight] bclp = 0x80000002 [ 1.391852] [drm:asle_set_backlight] updating opregion backlight 2/255 [ 1.391891] [drm:asle_set_backlight] bclp = 0x800000ff [ 1.391892] [drm:asle_set_backlight] updating opregion backlight 255/255 [ 1.392079] acpi device:5f: registered as cooling_device8 [ 1.392374] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.392879] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.395413] dracut: Starting plymouth daemon [ 1.400108] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 1.400110] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 1.400111] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.402608] [drm:i915_gem_open] [ 1.402622] [drm:intel_crtc_cursor_set] cursor off [ 1.402623] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 1.402625] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 1.402627] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.402628] [drm:intel_crtc_cursor_set] cursor off [ 1.402629] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 1.402630] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 1.402631] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.402632] [drm:intel_crtc_cursor_set] cursor off [ 1.402632] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 1.402634] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 1.402634] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.402640] [drm:i915_gem_open] [ 1.402645] [drm:intel_crtc_cursor_set] cursor off [ 1.402646] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 1.402647] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 1.402648] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.402681] [drm:intel_crtc_cursor_set] cursor off [ 1.402682] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 1.402683] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 1.402684] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.402685] [drm:intel_crtc_cursor_set] cursor off [ 1.402685] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 1.402686] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 1.402687] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 1.402692] [drm:i915_gem_open] [ 1.402723] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 1.402725] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 1.402728] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 1.402730] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] [ 1.402731] [drm:intel_crt_detect] [CONNECTOR:13:VGA-1] force=1 [ 1.402734] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1 [ 1.402735] [drm:intel_crt_detect] CRT detected via hotplug [ 1.427681] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.428206] Raw EDID: [ 1.428445] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.428703] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.428958] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.429180] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.429404] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.429626] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.429854] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.430071] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.442530] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.443084] Raw EDID: [ 1.443345] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.443602] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.443853] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.444088] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.444320] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.444515] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.444703] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.444876] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.457319] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.457664] Raw EDID: [ 1.457827] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.457985] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.458140] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.458285] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.458430] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.458579] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.458715] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.458849] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.471277] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.471611] Raw EDID: [ 1.471774] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.471938] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.472097] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.472243] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.472388] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.472533] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.472677] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.472834] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.472966] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 1.473707] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1) [ 1.473708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.473709] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.473710] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.477026] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.477256] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.477935] hub 2-1:1.0: USB hub found [ 1.478148] hub 2-1:1.0: 8 ports detected [ 1.551413] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.551742] Raw EDID: [ 1.551913] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.552087] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.552269] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.552438] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.552602] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.552808] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.552966] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.553109] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.591277] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.591576] Raw EDID: [ 1.591733] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.591935] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.592103] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.592271] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.592439] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.592605] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.592787] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.592948] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.602773] tsc: Refined TSC clocksource calibration: 3392.145 MHz [ 1.631158] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.631468] Raw EDID: [ 1.631604] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.631770] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.631932] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.632073] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.632213] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.632354] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.632495] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.632637] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.671050] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 1.671344] Raw EDID: [ 1.671476] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.671620] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.671756] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.671921] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.672061] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.672201] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.672342] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 1.672484] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1.672627] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 1.673169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.673170] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.673176] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] probed modes : [ 1.673178] [drm:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.673179] [drm:drm_mode_debug_printmodeline] Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.673180] [drm:drm_mode_debug_printmodeline] Modeline 25:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.673182] [drm:drm_mode_debug_printmodeline] Modeline 27:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 1.673183] [drm:drm_mode_debug_printmodeline] Modeline 24:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 1.673188] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 1.674273] [drm:drm_mode_getconnector] [CONNECTOR:16:?] [ 1.674274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] [ 1.674276] [drm:intel_dp_detect] [CONNECTOR:16:DP-1] [ 1.674279] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] disconnected [ 1.674280] [drm:drm_mode_getconnector] [CONNECTOR:16:?] [ 1.674281] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] [ 1.674281] [drm:intel_dp_detect] [CONNECTOR:16:DP-1] [ 1.674283] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] disconnected [ 1.674285] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 1.674286] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] [ 1.674287] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 1.674449] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.674451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.674452] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] disconnected [ 1.674454] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 1.674455] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] [ 1.674456] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 1.674609] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.674610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.674611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] disconnected [ 1.674613] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 1.674614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] [ 1.674615] [drm:intel_dp_detect] [CONNECTOR:21:DP-2] [ 1.674617] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] disconnected [ 1.674618] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 1.674619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] [ 1.674620] [drm:intel_dp_detect] [CONNECTOR:21:DP-2] [ 1.674622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] disconnected [ 1.674623] [drm:drm_mode_getconnector] [CONNECTOR:22:?] [ 1.674624] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] [ 1.674624] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-2] [ 1.674806] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.674807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 1.674808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] disconnected [ 1.674809] [drm:drm_mode_getconnector] [CONNECTOR:22:?] [ 1.674810] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] [ 1.674811] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-2] [ 1.675001] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.675003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 1.675005] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] disconnected [ 1.716285] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.717269] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258) [ 1.717808] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.718367] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20131218/utaddress-258) [ 1.719085] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20131218/utaddress-258) [ 1.719679] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.720239] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20131218/utaddress-258) [ 1.720835] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20131218/utaddress-258) [ 1.721430] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.722085] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.722518] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module [ 1.722539] snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X [ 1.722597] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 1.722629] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 1.722713] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258) [ 1.722713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.722836] iTCO_vendor_support: vendor-support=0 [ 1.722951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 1.722966] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 1.723104] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.726755] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 1.731425] ALSA sound/pci/hda/patch_realtek.c:434 SKU: Nid=0x1d sku_cfg=0x40400001 [ 1.731427] ALSA sound/pci/hda/patch_realtek.c:436 SKU: port_connectivity=0x1 [ 1.731428] ALSA sound/pci/hda/patch_realtek.c:437 SKU: enable_pcbeep=0x0 [ 1.731430] ALSA sound/pci/hda/patch_realtek.c:438 SKU: check_sum=0x00000000 [ 1.731431] ALSA sound/pci/hda/patch_realtek.c:439 SKU: customization=0x00000000 [ 1.731432] ALSA sound/pci/hda/patch_realtek.c:440 SKU: external_amp=0x0 [ 1.731434] ALSA sound/pci/hda/patch_realtek.c:441 SKU: platform_type=0x0 [ 1.731435] ALSA sound/pci/hda/patch_realtek.c:442 SKU: swap=0x0 [ 1.731436] ALSA sound/pci/hda/patch_realtek.c:443 SKU: override=0x1 [ 1.731703] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 1.731705] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.731706] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.731706] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0 [ 1.731707] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs: [ 1.731708] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x1a [ 1.731709] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18 [ 1.731710] ALSA sound/pci/hda/patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x40400001 for NID 0x1d [ 1.731711] ALSA sound/pci/hda/patch_realtek.c:520 realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0280 [ 1.742887] usb 2-1.6: new low-speed USB device number 3 using ehci-pci [ 1.911032] usb 2-1.6: New USB device found, idVendor=0557, idProduct=2220 [ 1.911465] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.911882] usb 2-1.6: Product: ATEN CS-1758/54 [ 1.912326] usb 2-1.6: Manufacturer: ATEN [ 1.946666] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0557:2220.0001/input/input7 [ 1.947654] hid-generic 0003:0557:2220.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.0-1.6/input0 [ 1.970261] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 1.974470] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:0557:2220.0002/input/input8 [ 1.975506] hid-generic 0003:0557:2220.0002: input,hidraw1: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.0-1.6/input1 [ 2.155381] dracut: Checking ext4: /dev/sda3 [ 2.155834] dracut: issuing e2fsck -a /dev/sda3 [ 2.178326] random: nonblocking pool is initialized [ 2.263254] dracut: /dev/sda3: clean, 658869/60538880 files, 12248151/242140160 blocks [ 2.263848] dracut: Remounting /dev/sda3 with -o ro [ 2.303431] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.357886] dracut: Mounted root filesystem /dev/sda3 [ 2.432837] device-mapper: uevent: version 1.0.3 [ 2.433390] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.488983] dracut: Switching root [ 2.603265] Switched to clocksource tsc [ 2.717346] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.719252] [drm:gen6_enable_rps] Overclocking supported. Max: 1200MHz, Overclock max: 1200MHz [ 2.859632] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 2.925100] systemd[1]: Failed to insert module 'ipv6' [ 2.936648] systemd[1]: Set hostname to . [ 3.114673] LVM: Logical Volume autoactivation enabled. [ 3.115031] LVM: Activation generator successfully completed. [ 3.370878] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 3.371238] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.371586] systemd[1]: Starting Syslog Socket. [ 3.371903] systemd[1]: Listening on Syslog Socket. [ 3.372188] systemd[1]: Starting Replay Read-Ahead Data... [ 3.372734] systemd[1]: Starting Collect Read-Ahead Data... [ 3.373323] systemd[1]: Starting Delayed Shutdown Socket. [ 3.373793] systemd[1]: Listening on Delayed Shutdown Socket. [ 3.373803] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 3.374340] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.374359] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 3.375180] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.375188] systemd[1]: Starting Encrypted Volumes. [ 3.376227] systemd[1]: Reached target Encrypted Volumes. [ 3.376237] systemd[1]: Starting Journal Socket. [ 3.377039] systemd[1]: Listening on Journal Socket. [ 3.377057] systemd[1]: Mounting Huge Pages File System... [ 3.377761] systemd[1]: Mounting Debug File System... [ 3.378334] systemd[1]: Starting Create static device nodes in /dev... [ 3.378925] systemd[1]: Mounting POSIX Message Queue File System... [ 3.379491] systemd[1]: Starting Journal Service... [ 3.380224] systemd[1]: Started Journal Service. [ 3.380411] systemd[1]: Starting udev Kernel Socket. [ 3.381116] systemd[1]: Listening on udev Kernel Socket. [ 3.381148] systemd[1]: Starting udev Control Socket. [ 3.381945] systemd[1]: Listening on udev Control Socket. [ 3.381977] systemd[1]: Starting udev Coldplug all Devices... [ 3.382947] systemd[1]: Starting LVM2 metadata daemon socket. [ 3.383314] systemd[1]: Listening on LVM2 metadata daemon socket. [ 3.383320] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 3.384131] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.384139] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.385432] systemd[1]: Expecting device dev-disk-by\x2duuid-50f1dcef\x2de289\x2d40be\x2dbc3c\x2d97766928b454.device... [ 3.386125] systemd[1]: Mounting Temporary Directory... [ 3.435346] systemd-readahead[2506]: Failed to create fanotify object: Function not implemented [ 3.435364] systemd-readahead[2505]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 3.523022] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 3.524028] systemd[1]: Expecting device dev-disk-by\x2duuid-8ebfad99\x2d4959\x2d4128\x2d9909\x2dde33bcd5dee3.device... [ 3.525124] systemd[1]: Started Replay Read-Ahead Data. [ 3.525257] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 3.526252] systemd[1]: Started Collect Read-Ahead Data. [ 3.526735] systemd[1]: Starting Load legacy module configuration... [ 3.527470] systemd[1]: Starting Setup Virtual Console... [ 3.528557] systemd[1]: Starting Apply Kernel Variables... [ 3.529601] systemd[1]: Started Set Up Additional Binary Formats. [ 3.529974] systemd[1]: Started File System Check on Root Device. [ 3.530377] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.531203] systemd[1]: Started Load Kernel Modules. [ 3.531550] systemd[1]: Mounting FUSE Control File System... [ 3.532031] systemd[1]: Mounted Configuration File System. [ 3.850387] EXT4-fs (sda3): re-mounted. Opts: (null) [ 4.093237] systemd-udevd[3411]: starting version 204 [ 4.477022] systemd-udevd[3425]: renamed network interface em1 to eno1 [ 5.585668] Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k [ 7.606203] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.756097] audit: type=1305 audit(1398317436.738:2): audit_pid=3491 old=0 auid=4294967295 ses=4294967295 res=1 [ 9.846261] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 9.947330] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 11.435456] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 11.435714] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 14.034003] [drm:intel_crtc_cursor_set] cursor off [ 14.034007] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 14.034010] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 14.034011] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 14.034013] [drm:intel_crtc_cursor_set] cursor off [ 14.034014] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 14.034014] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 14.034015] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 14.034016] [drm:intel_crtc_cursor_set] cursor off [ 14.034017] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 14.034018] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 14.034019] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 14.170346] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 14.170349] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 14.170350] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 79.123418] [drm:i915_gem_open] [ 79.123438] [drm:intel_crtc_cursor_set] cursor off [ 79.123441] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 79.123444] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 79.123445] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 79.123447] [drm:intel_crtc_cursor_set] cursor off [ 79.123448] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 79.123449] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 79.123450] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 79.123451] [drm:intel_crtc_cursor_set] cursor off [ 79.123452] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 79.123453] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 79.123454] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 79.123460] [drm:i915_gem_open] [ 79.123684] [drm:i915_gem_open] [ 79.123691] [drm:i915_gem_open] [ 79.123763] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 79.123767] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 79.123777] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 79.123778] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 79.123781] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 79.123783] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] [ 79.123784] [drm:intel_crt_detect] [CONNECTOR:13:VGA-1] force=1 [ 79.123787] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1 [ 79.123788] [drm:intel_crt_detect] CRT detected via hotplug [ 79.148851] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 79.148854] Raw EDID: [ 79.148855] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.148856] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.148857] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.148858] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.148858] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.148859] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.148860] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 79.148860] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.161096] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 79.161098] Raw EDID: [ 79.161100] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.161101] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.161101] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.161102] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.161103] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.161103] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.161104] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 79.161105] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.173393] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 79.173395] Raw EDID: [ 79.173397] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.173397] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.173398] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.173399] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.173400] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.173400] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.173401] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 79.173402] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.185684] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 79.185686] Raw EDID: [ 79.185688] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.185689] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.185689] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.185690] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.185691] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.185691] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.185692] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 79.185693] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.185696] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 79.186183] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1) [ 79.186186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 79.186188] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 79.186190] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 79.262640] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 79.262641] Raw EDID: [ 79.262642] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.262643] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.262644] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.262644] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.262645] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.262645] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.262646] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 79.262647] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.300205] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 79.300206] Raw EDID: [ 79.300207] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.300208] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.300208] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.300209] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.300209] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.300210] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.300210] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 79.300211] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.337801] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 79.337802] Raw EDID: [ 79.337802] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.337803] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.337804] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.337804] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.337805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.337805] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.337806] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 79.337807] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.375381] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 79.375382] Raw EDID: [ 79.375382] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.375383] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.375383] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.375384] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.375385] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.375385] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.375386] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 79.375386] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 79.375388] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 79.375755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 79.375756] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 79.375763] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] probed modes : [ 79.375765] [drm:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 79.375766] [drm:drm_mode_debug_printmodeline] Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 79.375767] [drm:drm_mode_debug_printmodeline] Modeline 25:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 79.375768] [drm:drm_mode_debug_printmodeline] Modeline 27:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 79.375770] [drm:drm_mode_debug_printmodeline] Modeline 24:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 79.375775] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 79.375781] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 79.375782] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 79.375798] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 79.375801] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 79.387299] [drm:drm_mode_addfb2] [FB:31] [ 79.420682] [drm:drm_mode_addfb2] [FB:32] [ 79.421937] [drm:drm_mode_setcrtc] [CRTC:5] [ 79.421939] [drm:drm_mode_setcrtc] [CONNECTOR:13:VGA-1] [ 79.421941] [drm:intel_crtc_set_config] [CRTC:5] [FB:32] #connectors=1 (x y) (0 0) [ 79.421943] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 79.421944] [drm:drm_mode_debug_printmodeline] Modeline 29:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 79.421946] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 79.421947] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 79.421948] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 79.421949] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 79.421951] [drm:connected_sink_compute_bpp] [CONNECTOR:13:VGA-1] checking for sink bpp constrains [ 79.421952] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 79.421953] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 79.421954] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 79.421955] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 79.421956] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 79.421957] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64 [ 79.421958] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 79.421959] [drm:intel_dump_pipe_config] requested mode: [ 79.421960] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 79.421961] [drm:intel_dump_pipe_config] adjusted mode: [ 79.421962] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 79.421963] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa [ 79.421964] [drm:intel_dump_pipe_config] port clock: 270000 [ 79.421964] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 79.421965] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 79.421966] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 79.421967] [drm:intel_dump_pipe_config] ips: 0 [ 79.421967] [drm:intel_dump_pipe_config] double wide: 0 [ 79.459332] [drm:intel_update_fbc] no output, disabling [ 79.459340] [drm:intel_ddi_put_crtc_pll] Disabling SPLL [ 79.459342] [drm:intel_ddi_pll_select] Using SPLL on pipe A [ 79.460441] [drm:ironlake_update_primary_plane] Writing base 00961000 00000000 0 0 4096 [ 79.460446] [drm:intel_crtc_mode_set] [ENCODER:14:DAC-14] set [MODE:0:1024x768] [ 79.461315] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 79.463312] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 65000KHz refresh rate: auxdiv=0, divsel=27, phasedir=0, phaseinc=22 [ 79.481323] [drm:i915_setup_compression] reserved 8388608 bytes of contiguous stolen space for FBC [ 79.481330] [drm:intel_connector_check_state] [CONNECTOR:13:VGA-1] [ 79.481334] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 79.481335] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 79.481336] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 79.481337] [drm:check_crtc_state] [CRTC:5] [ 79.481347] [drm:check_crtc_state] [CRTC:8] [ 79.481348] [drm:check_crtc_state] [CRTC:11] [ 79.531427] [drm:gen7_enable_fbc] enabled fbc on plane A [ 79.796837] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 79.830190] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 79.847478] [drm:drm_mode_setcrtc] [CRTC:5] [ 79.847484] [drm:drm_mode_setcrtc] [CONNECTOR:13:VGA-1] [ 79.847486] [drm:intel_crtc_set_config] [CRTC:5] [FB:31] #connectors=1 (x y) (0 0) [ 79.847488] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1 [ 79.847490] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 79.848606] [drm:ironlake_update_primary_plane] Writing base 00561000 00000000 0 0 4096 [ 79.864481] [drm:intel_update_fbc] disabling active FBC for update [ 79.864485] [drm:ironlake_disable_fbc] disabled FBC [ 79.914588] [drm:gen7_enable_fbc] enabled fbc on plane A [ 80.180241] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 80.213589] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 80.263591] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 80.296931] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 80.314788] [drm:intel_crtc_cursor_set] cursor off [ 80.314791] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 80.314792] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 80.314794] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 80.314795] [drm:drm_mode_debug_printmodeline] Modeline 29:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 80.314796] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 80.314798] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 80.314799] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 80.314801] [drm:connected_sink_compute_bpp] [CONNECTOR:13:VGA-1] checking for sink bpp constrains [ 80.314802] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 80.314803] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 80.314804] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 80.314804] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 80.314805] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 80.314806] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 1319761, gmch_n: 4194304, link_m: 54990, link_n: 524288, tu: 64 [ 80.314806] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 80.314807] [drm:intel_dump_pipe_config] requested mode: [ 80.314808] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 80.314808] [drm:intel_dump_pipe_config] adjusted mode: [ 80.314809] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 80.314810] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6 [ 80.314811] [drm:intel_dump_pipe_config] port clock: 270000 [ 80.314811] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 80.314812] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 80.314813] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 80.314813] [drm:intel_dump_pipe_config] ips: 0 [ 80.314813] [drm:intel_dump_pipe_config] double wide: 0 [ 80.314818] [drm:ironlake_disable_fbc] disabled FBC [ 80.364708] [drm:intel_update_fbc] no output, disabling [ 80.364715] [drm:intel_ddi_put_crtc_pll] Disabling SPLL [ 80.364717] [drm:intel_ddi_pll_select] Using SPLL on pipe A [ 80.364750] [drm:ironlake_update_primary_plane] Writing base 00435000 00000000 0 0 2880 [ 80.364754] [drm:intel_crtc_mode_set] [ENCODER:14:DAC-14] set [MODE:0:] [ 80.365624] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 80.365722] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 28319KHz refresh rate: auxdiv=0, divsel=5d, phasedir=0, phaseinc=15 [ 80.381698] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 80.381703] [drm:intel_connector_check_state] [CONNECTOR:13:VGA-1] [ 80.381706] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 80.381707] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 80.381707] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 80.381708] [drm:check_crtc_state] [CRTC:5] [ 80.381717] [drm:check_crtc_state] [CRTC:8] [ 80.381718] [drm:check_crtc_state] [CRTC:11] [ 80.381721] [drm:intel_crtc_cursor_set] cursor off [ 80.381722] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 80.381723] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 80.381724] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 80.381725] [drm:intel_crtc_cursor_set] cursor off [ 80.381726] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 80.381727] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 80.381727] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 80.406827] [drm:intel_crtc_cursor_set] cursor off [ 80.406831] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 80.406833] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 80.406835] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 80.406836] [drm:intel_crtc_cursor_set] cursor off [ 80.406837] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 80.406838] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 80.406839] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 80.406840] [drm:intel_crtc_cursor_set] cursor off [ 80.406841] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 80.406842] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 80.406843] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 268.999165] [drm:i915_gem_open] [ 268.999182] [drm:intel_crtc_cursor_set] cursor off [ 268.999184] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 268.999186] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 268.999188] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 268.999190] [drm:intel_crtc_cursor_set] cursor off [ 268.999191] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 268.999192] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 268.999204] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 268.999205] [drm:intel_crtc_cursor_set] cursor off [ 268.999205] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 268.999206] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 268.999207] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 268.999212] [drm:i915_gem_open] [ 268.999487] [drm:i915_gem_open] [ 268.999495] [drm:i915_gem_open] [ 268.999559] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 268.999563] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 268.999571] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 268.999572] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 268.999575] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 268.999577] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] [ 268.999578] [drm:intel_crt_detect] [CONNECTOR:13:VGA-1] force=1 [ 268.999581] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1 [ 268.999582] [drm:intel_crt_detect] CRT detected via hotplug [ 269.024624] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 269.024627] Raw EDID: [ 269.024628] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.024629] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.024630] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.024630] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.024631] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.024632] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.024633] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 269.024633] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.036940] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 269.036943] Raw EDID: [ 269.036944] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.036945] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.036946] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.036946] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.036947] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.036948] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.036948] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 269.036949] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.049194] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 269.049197] Raw EDID: [ 269.049198] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.049199] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.049200] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.049201] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.049201] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.049202] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.049203] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 269.049203] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.061449] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 269.061451] Raw EDID: [ 269.061453] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.061453] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.061454] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.061455] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.061456] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.061456] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.061457] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 269.061458] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.061461] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 269.062482] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1) [ 269.062487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 269.062490] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 269.062492] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 269.139004] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 269.139006] Raw EDID: [ 269.139007] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.139007] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.139008] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.139009] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.139009] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.139010] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.139011] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 269.139011] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.176601] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 269.176602] Raw EDID: [ 269.176603] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.176603] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.176604] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.176605] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.176605] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.176606] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.176606] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 269.176607] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.214197] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 269.214197] Raw EDID: [ 269.214198] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.214199] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.214199] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.214200] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.214200] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.214201] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.214202] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 269.214202] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.251813] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 269.251814] Raw EDID: [ 269.251815] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.251815] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.251816] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.251816] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.251817] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.251818] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.251818] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 269.251819] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 269.251821] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 269.252185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 269.252187] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 269.252193] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] probed modes : [ 269.252194] [drm:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 269.252196] [drm:drm_mode_debug_printmodeline] Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 269.252197] [drm:drm_mode_debug_printmodeline] Modeline 25:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 269.252198] [drm:drm_mode_debug_printmodeline] Modeline 27:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 269.252200] [drm:drm_mode_debug_printmodeline] Modeline 24:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 269.252205] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 269.252212] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 269.252213] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 269.252229] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 269.252232] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 269.261579] [drm:drm_mode_addfb2] [FB:31] [ 269.263097] [drm:drm_mode_addfb2] [FB:32] [ 269.264368] [drm:drm_mode_setcrtc] [CRTC:5] [ 269.264371] [drm:drm_mode_setcrtc] [CONNECTOR:13:VGA-1] [ 269.264372] [drm:intel_crtc_set_config] [CRTC:5] [FB:32] #connectors=1 (x y) (0 0) [ 269.264374] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 269.264375] [drm:drm_mode_debug_printmodeline] Modeline 29:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 269.264377] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 269.264378] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 269.264379] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 269.264381] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 269.264382] [drm:connected_sink_compute_bpp] [CONNECTOR:13:VGA-1] checking for sink bpp constrains [ 269.264384] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 269.264385] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 269.264386] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 269.264386] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 269.264387] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 269.264388] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64 [ 269.264389] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 269.264390] [drm:intel_dump_pipe_config] requested mode: [ 269.264391] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 269.264392] [drm:intel_dump_pipe_config] adjusted mode: [ 269.264393] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 269.264394] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa [ 269.264395] [drm:intel_dump_pipe_config] port clock: 270000 [ 269.264396] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 269.264397] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 269.264398] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 269.264398] [drm:intel_dump_pipe_config] ips: 0 [ 269.264399] [drm:intel_dump_pipe_config] double wide: 0 [ 269.303597] [drm:intel_update_fbc] no output, disabling [ 269.303605] [drm:intel_ddi_put_crtc_pll] Disabling SPLL [ 269.303608] [drm:intel_ddi_pll_select] Using SPLL on pipe A [ 269.304720] [drm:ironlake_update_primary_plane] Writing base 00961000 00000000 0 0 4096 [ 269.304724] [drm:intel_crtc_mode_set] [ENCODER:14:DAC-14] set [MODE:0:1024x768] [ 269.305594] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 269.307581] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 65000KHz refresh rate: auxdiv=0, divsel=27, phasedir=0, phaseinc=22 [ 269.329592] [drm:i915_setup_compression] reserved 8388608 bytes of contiguous stolen space for FBC [ 269.329599] [drm:intel_connector_check_state] [CONNECTOR:13:VGA-1] [ 269.329603] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 269.329604] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 269.329605] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 269.329607] [drm:check_crtc_state] [CRTC:5] [ 269.329616] [drm:check_crtc_state] [CRTC:8] [ 269.329618] [drm:check_crtc_state] [CRTC:11] [ 269.379697] [drm:gen7_enable_fbc] enabled fbc on plane A [ 269.645095] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 269.678432] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 269.695748] [drm:drm_mode_setcrtc] [CRTC:5] [ 269.695754] [drm:drm_mode_setcrtc] [CONNECTOR:13:VGA-1] [ 269.695756] [drm:intel_crtc_set_config] [CRTC:5] [FB:31] #connectors=1 (x y) (0 0) [ 269.695759] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=1 [ 269.695760] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 269.696875] [drm:ironlake_update_primary_plane] Writing base 00561000 00000000 0 0 4096 [ 269.712752] [drm:intel_update_fbc] disabling active FBC for update [ 269.712756] [drm:ironlake_disable_fbc] disabled FBC [ 269.762855] [drm:gen7_enable_fbc] enabled fbc on plane A [ 270.028488] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 270.061837] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 270.079974] [drm:ironlake_disable_fbc] disabled FBC [ 270.145018] [drm:gen7_enable_fbc] enabled fbc on plane A [ 270.411891] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 270.445235] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 270.463178] [drm:intel_crtc_cursor_set] cursor off [ 270.463181] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 270.463182] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 270.463185] [drm:drm_mode_debug_printmodeline] Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 270.463186] [drm:drm_mode_debug_printmodeline] Modeline 29:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 270.463187] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 270.463188] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 270.463190] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 270.463191] [drm:connected_sink_compute_bpp] [CONNECTOR:13:VGA-1] checking for sink bpp constrains [ 270.463193] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 270.463194] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 270.463195] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 270.463195] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 270.463196] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 270.463197] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 1319761, gmch_n: 4194304, link_m: 54990, link_n: 524288, tu: 64 [ 270.463198] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 270.463199] [drm:intel_dump_pipe_config] requested mode: [ 270.463200] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 270.463200] [drm:intel_dump_pipe_config] adjusted mode: [ 270.463201] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 270.463202] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6 [ 270.463203] [drm:intel_dump_pipe_config] port clock: 270000 [ 270.463203] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 270.463204] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 270.463205] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 270.463205] [drm:intel_dump_pipe_config] ips: 0 [ 270.463206] [drm:intel_dump_pipe_config] double wide: 0 [ 270.463211] [drm:ironlake_disable_fbc] disabled FBC [ 270.513104] [drm:intel_update_fbc] no output, disabling [ 270.513111] [drm:intel_ddi_put_crtc_pll] Disabling SPLL [ 270.513113] [drm:intel_ddi_pll_select] Using SPLL on pipe A [ 270.513146] [drm:ironlake_update_primary_plane] Writing base 00435000 00000000 0 0 2880 [ 270.513150] [drm:intel_crtc_mode_set] [ENCODER:14:DAC-14] set [MODE:0:] [ 270.514019] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 270.514119] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 28319KHz refresh rate: auxdiv=0, divsel=5d, phasedir=0, phaseinc=15 [ 270.530093] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 270.530098] [drm:intel_connector_check_state] [CONNECTOR:13:VGA-1] [ 270.530101] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 270.530102] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 270.530103] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 270.530104] [drm:check_crtc_state] [CRTC:5] [ 270.530113] [drm:check_crtc_state] [CRTC:8] [ 270.530113] [drm:check_crtc_state] [CRTC:11] [ 270.530116] [drm:intel_crtc_cursor_set] cursor off [ 270.530117] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 270.530119] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 270.530120] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 270.530121] [drm:intel_crtc_cursor_set] cursor off [ 270.530121] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 270.530122] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 270.530123] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 270.531230] [drm:intel_crtc_cursor_set] cursor off [ 270.531232] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 270.531234] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 270.531236] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 270.531237] [drm:intel_crtc_cursor_set] cursor off [ 270.531238] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 270.531239] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 270.531240] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 270.531241] [drm:intel_crtc_cursor_set] cursor off [ 270.531242] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 270.531243] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 270.531244] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 373.058397] [drm:i915_gem_open] [ 373.058416] [drm:intel_crtc_cursor_set] cursor off [ 373.058418] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 373.058420] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 373.058422] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 373.058424] [drm:intel_crtc_cursor_set] cursor off [ 373.058424] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 373.058426] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 373.058427] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 373.058428] [drm:intel_crtc_cursor_set] cursor off [ 373.058429] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 373.058430] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 373.058431] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 373.058437] [drm:i915_gem_open] [ 373.058654] [drm:i915_gem_open] [ 373.058661] [drm:i915_gem_open] [ 373.058666] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 373.058671] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[3] [ 373.058677] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 373.058678] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] [ 373.058680] [drm:intel_crt_detect] [CONNECTOR:13:VGA-1] force=1 [ 373.058683] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1 [ 373.058683] [drm:intel_crt_detect] CRT detected via hotplug [ 373.083695] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 373.083723] Raw EDID: [ 373.083731] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.083749] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.083765] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.083782] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.083799] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.083815] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.083832] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 373.083857] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.096160] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 373.096189] Raw EDID: [ 373.096198] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.096215] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.096231] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.096248] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.096265] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.096283] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.096299] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 373.096485] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.108892] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 373.109257] Raw EDID: [ 373.109418] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.109579] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.109739] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.109893] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.110026] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.110158] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.110290] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 373.110423] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.122794] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 373.123146] Raw EDID: [ 373.123311] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.123472] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.123626] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.123772] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.123922] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.124073] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.124207] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 373.124341] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.124475] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 373.124903] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0030 w(1) [ 373.124905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 373.124916] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 373.124918] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 373.201825] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 373.202131] Raw EDID: [ 373.202296] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.202445] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.202585] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.202728] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.202870] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.203013] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.203183] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 373.203323] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.240840] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 373.241145] Raw EDID: [ 373.241288] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.241436] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.241577] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.241718] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.241859] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.242003] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.242149] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 373.242287] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.279798] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 373.280111] Raw EDID: [ 373.280258] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.280400] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.280539] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.280668] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.280799] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.280933] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.281096] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 373.281231] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.318926] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 193 [ 373.319224] Raw EDID: [ 373.319373] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.319515] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.319654] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.319785] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.319917] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.320072] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.320214] ff ff ff ff ff ff ff ff ff 5a 41 54 4e ff ff ff [ 373.320348] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 373.320485] i915 0000:00:02.0: VGA-1: Ignoring invalid EDID block 1. [ 373.320997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 373.320999] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 373.321005] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] probed modes : [ 373.321007] [drm:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 373.321008] [drm:drm_mode_debug_printmodeline] Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 373.321010] [drm:drm_mode_debug_printmodeline] Modeline 25:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 373.321011] [drm:drm_mode_debug_printmodeline] Modeline 27:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 373.321012] [drm:drm_mode_debug_printmodeline] Modeline 24:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 373.321017] [drm:drm_mode_getconnector] [CONNECTOR:13:?] [ 373.321039] [drm:drm_mode_getconnector] [CONNECTOR:16:?] [ 373.321041] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] [ 373.321042] [drm:intel_dp_detect] [CONNECTOR:16:DP-1] [ 373.321045] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] disconnected [ 373.321046] [drm:drm_mode_getconnector] [CONNECTOR:16:?] [ 373.321047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] [ 373.321048] [drm:intel_dp_detect] [CONNECTOR:16:DP-1] [ 373.321050] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:16:DP-1] disconnected [ 373.321057] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 373.321059] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] [ 373.321060] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 373.321218] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 373.321219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 373.321220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] disconnected [ 373.321221] [drm:drm_mode_getconnector] [CONNECTOR:19:?] [ 373.321222] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] [ 373.321223] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1] [ 373.321378] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 373.321378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 373.321379] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:19:HDMI-A-1] disconnected [ 373.321386] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 373.321387] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] [ 373.321388] [drm:intel_dp_detect] [CONNECTOR:21:DP-2] [ 373.321390] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] disconnected [ 373.321391] [drm:drm_mode_getconnector] [CONNECTOR:21:?] [ 373.321392] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] [ 373.321393] [drm:intel_dp_detect] [CONNECTOR:21:DP-2] [ 373.321395] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] disconnected [ 373.321400] [drm:drm_mode_getconnector] [CONNECTOR:22:?] [ 373.321401] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] [ 373.321402] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-2] [ 373.321552] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 373.321553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 373.321554] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] disconnected [ 373.321555] [drm:drm_mode_getconnector] [CONNECTOR:22:?] [ 373.321556] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] [ 373.321556] [drm:intel_hdmi_detect] [CONNECTOR:22:HDMI-A-2] [ 373.321706] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 373.321706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 373.321707] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:22:HDMI-A-2] disconnected [ 373.324587] [drm:drm_mode_addfb2] [FB:31] [ 373.883306] [drm:drm_mode_setcrtc] [CRTC:5] [ 373.883309] [drm:drm_mode_setcrtc] [CONNECTOR:13:VGA-1] [ 373.883311] [drm:intel_crtc_set_config] [CRTC:5] [FB:31] #connectors=1 (x y) (0 0) [ 373.883313] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 373.883315] [drm:drm_mode_debug_printmodeline] Modeline 29:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 373.883316] [drm:drm_mode_debug_printmodeline] Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 373.883317] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=1 [ 373.883319] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 373.883320] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 373.883322] [drm:connected_sink_compute_bpp] [CONNECTOR:13:VGA-1] checking for sink bpp constrains [ 373.883324] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 373.883325] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 373.883326] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 373.883327] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 373.883327] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 373.883329] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64 [ 373.883330] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 373.883330] [drm:intel_dump_pipe_config] requested mode: [ 373.883332] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 373.883332] [drm:intel_dump_pipe_config] adjusted mode: [ 373.883334] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 373.883335] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa [ 373.883336] [drm:intel_dump_pipe_config] port clock: 270000 [ 373.883336] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 373.883337] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 373.883338] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 373.883339] [drm:intel_dump_pipe_config] ips: 0 [ 373.883340] [drm:intel_dump_pipe_config] double wide: 0 [ 373.925282] [drm:intel_update_fbc] no output, disabling [ 373.925290] [drm:intel_ddi_put_crtc_pll] Disabling SPLL [ 373.925292] [drm:intel_ddi_pll_select] Using SPLL on pipe A [ 373.926149] [drm:ironlake_update_primary_plane] Writing base 00561000 00000000 0 0 4096 [ 373.926153] [drm:intel_crtc_mode_set] [ENCODER:14:DAC-14] set [MODE:0:1024x768] [ 373.927023] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 373.927117] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 65000KHz refresh rate: auxdiv=0, divsel=27, phasedir=0, phaseinc=22 [ 373.946273] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 373.946280] [drm:intel_connector_check_state] [CONNECTOR:13:VGA-1] [ 373.946284] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 373.946285] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 373.946286] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 373.946287] [drm:check_crtc_state] [CRTC:5] [ 373.946297] [drm:check_crtc_state] [CRTC:8] [ 373.946298] [drm:check_crtc_state] [CRTC:11] [ 373.946316] [drm:drm_mode_setcrtc] [CRTC:5] [ 373.946318] [drm:intel_crtc_set_config] [CRTC:5] [NOFB] [ 373.946320] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 373.946321] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [NOCRTC] [ 373.946322] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 373.946323] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 373.946324] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch [ 373.946326] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [ 373.996314] [drm:intel_update_fbc] no output, disabling [ 373.996318] [drm:intel_ddi_put_crtc_pll] Disabling SPLL [ 373.996324] [drm:intel_display_power_put] disabling always-on [ 373.996328] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 373.996330] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 373.996331] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 373.996332] [drm:check_crtc_state] [CRTC:5] [ 373.996334] [drm:check_crtc_state] [CRTC:8] [ 373.996335] [drm:check_crtc_state] [CRTC:11] [ 373.996343] [drm:drm_mode_setcrtc] [CRTC:8] [ 373.996345] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 373.996347] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 373.996348] [drm:drm_mode_setcrtc] [CRTC:11] [ 373.996349] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 373.996350] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 374.324568] [drm:intel_display_power_put] disabling display [ 374.324572] [drm:hsw_set_power_well] Requesting to disable the power well [ 374.324588] [drm:intel_runtime_suspend] Suspending device [ 374.324589] [drm:hsw_enable_pc8] Enabling package C8+ [ 374.338412] [drm:intel_runtime_suspend] Device suspended [ 374.397419] [drm:intel_runtime_resume] Resuming device [ 374.399397] [drm:hsw_disable_pc8] Disabling package C8+ [ 374.517446] [drm:intel_runtime_resume] Device resumed [ 374.519969] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 374.519975] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 374.522499] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 374.522503] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 374.522661] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(128) [ 374.573470] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 374.581498] [drm:intel_runtime_suspend] Suspending device [ 374.581499] [drm:hsw_enable_pc8] Enabling package C8+ [ 374.595478] [drm:intel_runtime_suspend] Device suspended [ 374.597495] [drm:intel_runtime_resume] Resuming device [ 374.599480] [drm:hsw_disable_pc8] Disabling package C8+ [ 374.715529] [drm:intel_runtime_resume] Device resumed [ 374.715688] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(128) [ 374.715691] [drm:intel_runtime_suspend] Suspending device [ 374.715692] [drm:hsw_enable_pc8] Enabling package C8+ [ 374.727534] [drm:intel_runtime_suspend] Device suspended [ 374.729569] [drm:intel_runtime_resume] Resuming device [ 374.731555] [drm:hsw_disable_pc8] Disabling package C8+ [ 374.847605] [drm:intel_runtime_resume] Device resumed [ 374.898626] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 374.906633] [drm:intel_runtime_suspend] Suspending device [ 374.906634] [drm:hsw_enable_pc8] Enabling package C8+ [ 374.920635] [drm:intel_runtime_suspend] Device suspended [ 374.922629] [drm:intel_runtime_resume] Resuming device [ 374.924616] [drm:hsw_disable_pc8] Disabling package C8+ [ 375.040665] [drm:intel_runtime_resume] Device resumed [ 375.052866] [drm:intel_runtime_suspend] Suspending device [ 375.052868] [drm:hsw_enable_pc8] Enabling package C8+ [ 375.066675] [drm:intel_runtime_suspend] Device suspended [ 375.068691] [drm:intel_runtime_resume] Resuming device [ 375.070677] [drm:hsw_disable_pc8] Disabling package C8+ [ 375.188726] [drm:intel_runtime_resume] Device resumed [ 375.239769] [drm] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 375.247774] [drm:intel_runtime_suspend] Suspending device [ 375.247775] [drm:hsw_enable_pc8] Enabling package C8+ [ 375.247899] [drm:intel_crtc_cursor_set] cursor off [ 375.247901] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 375.247902] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 375.247903] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 375.247904] [drm:drm_mode_debug_printmodeline] Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 375.247905] [drm:drm_mode_debug_printmodeline] Modeline 29:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 375.247906] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=1, fb_changed=0 [ 375.247907] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch [ 375.247908] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 375.247908] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch [ 375.247909] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch [ 375.247910] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 375.247911] [drm:connected_sink_compute_bpp] [CONNECTOR:13:VGA-1] checking for sink bpp constrains [ 375.247913] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 375.247913] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 375.247914] [drm:intel_dump_pipe_config] [CRTC:5][modeset] config for pipe A [ 375.247915] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 375.247915] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 375.247916] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 1319761, gmch_n: 4194304, link_m: 54990, link_n: 524288, tu: 64 [ 375.247917] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 375.247917] [drm:intel_dump_pipe_config] requested mode: [ 375.247918] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 375.247918] [drm:intel_dump_pipe_config] adjusted mode: [ 375.247919] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 28319 720 738 846 900 400 413 415 449 0x0 0x6 [ 375.247920] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6 [ 375.247921] [drm:intel_dump_pipe_config] port clock: 270000 [ 375.247921] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 375.247922] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 375.247922] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 375.247923] [drm:intel_dump_pipe_config] ips: 0 [ 375.247923] [drm:intel_dump_pipe_config] double wide: 0 [ 375.261776] [drm:intel_runtime_suspend] Device suspended [ 375.263773] [drm:intel_runtime_resume] Resuming device [ 375.265759] [drm:hsw_disable_pc8] Disabling package C8+ [ 375.383808] [drm:intel_runtime_resume] Device resumed [ 375.383808] [drm:intel_display_power_get] enabling always-on [ 375.383809] [drm:intel_display_power_get] enabling display [ 375.383810] [drm:hsw_set_power_well] Enabling power well [ 375.385812] [drm:intel_ddi_pll_select] Using SPLL on pipe A [ 375.385845] [drm:ironlake_update_primary_plane] Writing base 00435000 00000000 0 0 2880 [ 375.385848] [drm:intel_crtc_mode_set] [ENCODER:14:DAC-14] set [MODE:0:] [ 375.386717] [drm:hsw_fdi_link_train] FDI link training done on step 0 [ 375.386818] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 28319KHz refresh rate: auxdiv=0, divsel=5d, phasedir=0, phaseinc=15 [ 375.406818] [drm:intel_update_fbc] framebuffer not tiled or fenced, disabling compression [ 375.406820] [drm:intel_connector_check_state] [CONNECTOR:13:VGA-1] [ 375.406822] [drm:check_encoder_state] [ENCODER:14:DAC-14] [ 375.406823] [drm:check_encoder_state] [ENCODER:15:TMDS-15] [ 375.406824] [drm:check_encoder_state] [ENCODER:20:TMDS-20] [ 375.406825] [drm:check_crtc_state] [CRTC:5] [ 375.406833] [drm:check_crtc_state] [CRTC:8] [ 375.406834] [drm:check_crtc_state] [CRTC:11] [ 375.406836] [drm:intel_crtc_cursor_set] cursor off [ 375.406837] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 375.406838] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 375.406839] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 375.406840] [drm:intel_crtc_cursor_set] cursor off [ 375.406840] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 375.406841] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 375.406842] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 375.408167] [drm:intel_crtc_cursor_set] cursor off [ 375.408169] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 375.408171] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 375.408173] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 375.408174] [drm:intel_crtc_cursor_set] cursor off [ 375.408175] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 375.408177] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 375.408178] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 375.408179] [drm:intel_crtc_cursor_set] cursor off [ 375.408181] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 375.408182] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 375.408184] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 451.389736] [drm:i915_gem_open] [ 451.389754] [drm:intel_crtc_cursor_set] cursor off [ 451.389757] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 451.389759] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 451.389761] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 451.389762] [drm:intel_crtc_cursor_set] cursor off [ 451.389763] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 451.389764] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 451.389765] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 451.389766] [drm:intel_crtc_cursor_set] cursor off [ 451.389767] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 451.389768] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 451.389769] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 451.389775] [drm:i915_gem_open] [ 451.389780] [drm:intel_crtc_cursor_set] cursor off [ 451.389781] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 451.389782] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 451.389783] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 451.389784] [drm:intel_crtc_cursor_set] cursor off [ 451.389785] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 451.389786] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 451.389787] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 451.389787] [drm:intel_crtc_cursor_set] cursor off [ 451.389788] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 451.389789] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 451.389790] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 451.389793] [drm:i915_gem_open] [ 451.390011] [drm:i915_gem_open] [ 451.390023] [drm:i915_gem_open] [ 461.508178] [drm:intel_crtc_cursor_set] cursor off [ 461.508182] [drm:intel_crtc_set_config] [CRTC:5] [FB:30] #connectors=1 (x y) (0 0) [ 461.508185] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:5], mode_changed=0, fb_changed=0 [ 461.508186] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 461.508188] [drm:intel_crtc_cursor_set] cursor off [ 461.508189] [drm:intel_crtc_set_config] [CRTC:8] [NOFB] [ 461.508190] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0 [ 461.508191] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5] [ 461.508192] [drm:intel_crtc_cursor_set] cursor off [ 461.508193] [drm:intel_crtc_set_config] [CRTC:11] [NOFB] [ 461.508194] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0 [ 461.508195] [drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:5]