[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=UUID=9153594e-1a7d-4561-a62c-2fb46f33095f ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: System manufacturer System Product Name/A8N-E, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 0100000000 mask FFC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfff0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfff0000 page 4k [ 0.000000] kernel direct mapping tables up to bfff0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ bffea000-bfff0000 [ 0.000000] RAMDISK: 36c30000 - 37610000 [ 0.000000] ACPI: RSDP 00000000000f76f0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 00000000bfff3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000bfff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000bfff3180 06264 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bfff0000 00040 [ 0.000000] ACPI: SSDT 00000000bfff9500 001CA (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: SRAT 00000000bfff9740 000C8 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: MCFG 00000000bfff9880 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000bfff9440 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000 [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,c0000000) -> [0,c0000000) [ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfff0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048447 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 768040 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000bfff3000 [ 0.000000] PM: Registered nosave memory: 00000000bfff3000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82816 r8192 d23680 u1048576 [ 0.000000] pcpu-alloc: s82816 r8192 d23680 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030522 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-amd64 root=UUID=9153594e-1a7d-4561-a62c-2fb46f33095f ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 [ 0.000000] Memory: 3985996k/5242880k available (3409k kernel code, 1049092k absent, 207792k reserved, 3324k data, 572k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2211.548 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4423.09 BogoMIPS (lpj=8846192) [ 0.008014] pid_max: default: 32768 minimum: 301 [ 0.008085] Security Framework initialized [ 0.008095] AppArmor: AppArmor disabled by boot time parameter [ 0.008574] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.014449] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.017030] Mount-cache hash table entries: 256 [ 0.017266] Initializing cgroup subsys cpuacct [ 0.017273] Initializing cgroup subsys memory [ 0.017295] Initializing cgroup subsys devices [ 0.017298] Initializing cgroup subsys freezer [ 0.017301] Initializing cgroup subsys net_cls [ 0.017306] Initializing cgroup subsys blkio [ 0.017320] Initializing cgroup subsys perf_event [ 0.017368] tseg: 0000000000 [ 0.017395] CPU: Physical Processor ID: 0 [ 0.017397] CPU: Processor Core ID: 0 [ 0.017400] mce: CPU supports 5 MCE banks [ 0.017793] ACPI: Core revision 20110623 [ 0.023371] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.063079] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 0.064003] Performance Events: AMD PMU driver. [ 0.064003] ... version: 0 [ 0.064003] ... bit width: 48 [ 0.064003] ... generic registers: 4 [ 0.064003] ... value mask: 0000ffffffffffff [ 0.064003] ... max period: 00007fffffffffff [ 0.064003] ... fixed-purpose events: 0 [ 0.064003] ... event mask: 000000000000000f [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] Booting Node 0, Processors #1 Ok. [ 0.064003] smpboot cpu 1: start_ip = 9a000 [ 0.148094] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148128] Brought up 2 CPUs [ 0.148131] Total of 2 processors activated (8846.06 BogoMIPS). [ 0.148859] devtmpfs: initialized [ 0.152736] PM: Registering ACPI NVS region at bfff0000 (12288 bytes) [ 0.152736] print_constraints: dummy: [ 0.152736] NET: Registered protocol family 16 [ 0.152736] node 0 link 0: io port [1000, fffff] [ 0.152736] TOM: 00000000c0000000 aka 3072M [ 0.152736] node 0 link 0: mmio [e0000000, efffffff] [ 0.152736] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.152736] node 0 link 0: mmio [a0000, bffff] [ 0.152736] node 0 link 0: mmio [c0000000, fed3ffff] [ 0.152736] TOM2: 0000000140000000 aka 5120M [ 0.152736] bus: [00, ff] on node 0 link 0 [ 0.152736] bus: 00 index 0 [io 0x0000-0xffff] [ 0.152736] bus: 00 index 1 [mem 0xc0000000-0xffffffff] [ 0.152736] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff] [ 0.152736] bus: 00 index 3 [mem 0x000a0000-0x000bffff] [ 0.152736] bus: 00 index 4 [mem 0x140000000-0xfcffffffff] [ 0.152736] ACPI: bus type pci registered [ 0.152736] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.152736] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.182868] PCI: Using configuration type 1 for base access [ 0.184093] bio: create slab at 0 [ 0.184152] ACPI: Added _OSI(Module Device) [ 0.184152] ACPI: Added _OSI(Processor Device) [ 0.184152] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.184152] ACPI: Added _OSI(Processor Aggregator Device) [ 0.185163] ACPI: EC: Look up EC in DSDT [ 0.191150] ACPI: Interpreter enabled [ 0.191157] ACPI: (supports S0 S1 S3 S4 S5) [ 0.191187] ACPI: Using IOAPIC for interrupt routing [ 0.198606] ACPI: No dock devices found. [ 0.198611] HEST: Table not found. [ 0.198619] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.198693] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.198840] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.198843] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.198846] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.198849] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.198852] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) [ 0.198870] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580 [ 0.198948] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601 [ 0.198969] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.198984] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05 [ 0.198992] pci 0000:00:01.1: reg 10: [io 0xe400-0xe41f] [ 0.199004] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f] [ 0.199009] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f] [ 0.199023] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.199028] pci 0000:00:01.1: PME# disabled [ 0.199045] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03 [ 0.199052] pci 0000:00:02.0: reg 10: [mem 0xdc004000-0xdc004fff] [ 0.199078] pci 0000:00:02.0: supports D1 D2 [ 0.199080] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.199083] pci 0000:00:02.0: PME# disabled [ 0.199101] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03 [ 0.199109] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff] [ 0.199140] pci 0000:00:02.1: supports D1 D2 [ 0.199142] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.199145] pci 0000:00:02.1: PME# disabled [ 0.199165] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401 [ 0.199172] pci 0000:00:04.0: reg 10: [io 0xdc00-0xdcff] [ 0.199177] pci 0000:00:04.0: reg 14: [io 0xe000-0xe0ff] [ 0.199181] pci 0000:00:04.0: reg 18: [mem 0xdc003000-0xdc003fff] [ 0.199202] pci 0000:00:04.0: supports D1 D2 [ 0.199215] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101 [ 0.199232] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] [ 0.199259] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101 [ 0.199266] pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7] [ 0.199271] pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.199276] pci 0000:00:07.0: reg 18: [io 0x0970-0x0977] [ 0.199281] pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73] [ 0.199286] pci 0000:00:07.0: reg 20: [io 0xd800-0xd80f] [ 0.199290] pci 0000:00:07.0: reg 24: [mem 0xdc002000-0xdc002fff] [ 0.199314] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101 [ 0.199321] pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7] [ 0.199327] pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3] [ 0.199332] pci 0000:00:08.0: reg 18: [io 0x0960-0x0967] [ 0.199337] pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63] [ 0.199342] pci 0000:00:08.0: reg 20: [io 0xc400-0xc40f] [ 0.199347] pci 0000:00:08.0: reg 24: [mem 0xdc001000-0xdc001fff] [ 0.199370] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604 [ 0.199391] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680 [ 0.199398] pci 0000:00:0a.0: reg 10: [mem 0xdc000000-0xdc000fff] [ 0.199403] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb007] [ 0.199426] pci 0000:00:0a.0: supports D1 D2 [ 0.199428] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.199432] pci 0000:00:0a.0: PME# disabled [ 0.199446] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604 [ 0.199474] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.199477] pci 0000:00:0b.0: PME# disabled [ 0.199494] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604 [ 0.199521] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.199524] pci 0000:00:0c.0: PME# disabled [ 0.199540] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604 [ 0.199566] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.199569] pci 0000:00:0d.0: PME# disabled [ 0.199585] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604 [ 0.199611] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.199614] pci 0000:00:0e.0: PME# disabled [ 0.199634] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.199657] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.199676] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.199695] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.199715] PCI: peer root bus 00 res updated from pci conf [ 0.199745] pci 0000:05:06.0: [14f1:8800] type 0 class 0x000400 [ 0.199757] pci 0000:05:06.0: reg 10: [mem 0xd8000000-0xd8ffffff] [ 0.199816] pci 0000:05:06.1: [14f1:8811] type 0 class 0x000480 [ 0.199826] pci 0000:05:06.1: reg 10: [mem 0xd9000000-0xd9ffffff] [ 0.199879] pci 0000:05:06.2: [14f1:8802] type 0 class 0x000480 [ 0.199890] pci 0000:05:06.2: reg 10: [mem 0xda000000-0xdaffffff] [ 0.199944] pci 0000:05:06.4: [14f1:8804] type 0 class 0x000480 [ 0.199954] pci 0000:05:06.4: reg 10: [mem 0xdb000000-0xdbffffff] [ 0.200034] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.200038] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff] [ 0.200042] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.200045] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.200049] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode) [ 0.200052] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.200055] pci 0000:00:09.0: bridge window [mem 0x140000000-0xfcffffffff] (subtractive decode) [ 0.200077] pci 0000:00:0b.0: PCI bridge to [bus 04-04] [ 0.200099] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.200122] pci 0000:00:0d.0: PCI bridge to [bus 02-02] [ 0.200155] pci 0000:01:00.0: [10de:0140] type 0 class 0x000300 [ 0.200163] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd3ffffff] [ 0.200171] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.200180] pci 0000:01:00.0: reg 1c: [mem 0xd4000000-0xd4ffffff 64bit] [ 0.200190] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.200220] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.200228] pci 0000:00:0e.0: PCI bridge to [bus 01-01] [ 0.200232] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff] [ 0.200236] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.200248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.200479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.200700] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.200705] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.200707] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.241650] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.241708] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.241765] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.241820] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.241877] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.241933] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.241989] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.242046] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.242104] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.242159] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.242214] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.242269] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.242325] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.242388] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.242450] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.242510] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.242595] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.242668] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.242741] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.242814] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.242851] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.242935] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.243016] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.243096] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.243176] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.243256] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.243337] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.243417] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.243497] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.243583] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.243669] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.243756] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.243930] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.243930] vgaarb: loaded [ 0.243930] vgaarb: bridge control possible 0000:01:00.0 [ 0.244054] PCI: Using ACPI for IRQ routing [ 0.249114] PCI: pci_cache_line_size set to 64 bytes [ 0.249135] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff] [ 0.249202] Expanded resource reserved due to conflict with PCI Bus #00 [ 0.249205] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.249209] reserve RAM buffer: 00000000bfff0000 - 00000000bfffffff [ 0.252447] pnp: PnP ACPI init [ 0.252481] ACPI: bus type pnp registered [ 0.252641] pnp 00:00: [bus 00-ff] [ 0.252644] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.252647] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.252650] pnp 00:00: [io 0x0d00-0xffff window] [ 0.252653] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.252656] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.252659] pnp 00:00: [mem 0xc0000000-0xfebfffff window] [ 0.252786] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.252811] pnp 00:01: [io 0x4000-0x407f] [ 0.252814] pnp 00:01: [io 0x4080-0x40ff] [ 0.252817] pnp 00:01: [io 0x4400-0x447f] [ 0.252819] pnp 00:01: [io 0x4480-0x44ff] [ 0.252822] pnp 00:01: [io 0x4800-0x487f] [ 0.252825] pnp 00:01: [io 0x4880-0x48ff] [ 0.252922] system 00:01: [io 0x4000-0x407f] has been reserved [ 0.252925] system 00:01: [io 0x4080-0x40ff] has been reserved [ 0.252929] system 00:01: [io 0x4400-0x447f] has been reserved [ 0.252932] system 00:01: [io 0x4480-0x44ff] has been reserved [ 0.252935] system 00:01: [io 0x4800-0x487f] has been reserved [ 0.252939] system 00:01: [io 0x4880-0x48ff] has been reserved [ 0.252942] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.253543] pnp 00:02: [io 0x0010-0x001f] [ 0.253546] pnp 00:02: [io 0x0022-0x003f] [ 0.253548] pnp 00:02: [io 0x0044-0x005f] [ 0.253551] pnp 00:02: [io 0x0062-0x0063] [ 0.253554] pnp 00:02: [io 0x0065-0x006f] [ 0.253556] pnp 00:02: [io 0x0074-0x007f] [ 0.253559] pnp 00:02: [io 0x0091-0x0093] [ 0.253561] pnp 00:02: [io 0x00a2-0x00bf] [ 0.253564] pnp 00:02: [io 0x00e0-0x00ef] [ 0.253567] pnp 00:02: [io 0x04d0-0x04d1] [ 0.253569] pnp 00:02: [io 0x0800-0x0805] [ 0.253572] pnp 00:02: [io 0x0290-0x0297] [ 0.253654] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.253658] system 00:02: [io 0x0800-0x0805] has been reserved [ 0.253661] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.253665] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.253684] pnp 00:03: [dma 4] [ 0.253686] pnp 00:03: [io 0x0000-0x000f] [ 0.253689] pnp 00:03: [io 0x0080-0x0090] [ 0.253691] pnp 00:03: [io 0x0094-0x009f] [ 0.253694] pnp 00:03: [io 0x00c0-0x00df] [ 0.253742] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.253757] pnp 00:04: [io 0x0070-0x0073] [ 0.253776] pnp 00:04: [irq 8] [ 0.253826] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.253839] pnp 00:05: [io 0x0061] [ 0.253889] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.253902] pnp 00:06: [io 0x00f0-0x00ff] [ 0.253909] pnp 00:06: [irq 13] [ 0.253958] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.254144] pnp 00:07: [io 0x03f0-0x03f5] [ 0.254147] pnp 00:07: [io 0x03f7] [ 0.254154] pnp 00:07: [irq 6] [ 0.254157] pnp 00:07: [dma 2] [ 0.254228] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.254461] pnp 00:08: [io 0x03f8-0x03ff] [ 0.254468] pnp 00:08: [irq 4] [ 0.254561] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.255072] pnp 00:09: [io 0x0378-0x037f] [ 0.255075] pnp 00:09: [io 0x0778-0x077b] [ 0.255083] pnp 00:09: [irq 7] [ 0.255085] pnp 00:09: [dma 3] [ 0.255175] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.255454] pnp 00:0a: [io 0x0330-0x0331] [ 0.255461] pnp 00:0a: [irq 10] [ 0.255534] pnp 00:0a: Plug and Play ACPI device, IDs PNPb006 (active) [ 0.255743] pnp 00:0b: [io 0x0201] [ 0.255806] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active) [ 0.255829] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.255910] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.255914] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.256067] pnp 00:0d: [mem 0x000f0000-0x000f3fff] [ 0.256070] pnp 00:0d: [mem 0x000f4000-0x000f7fff] [ 0.256074] pnp 00:0d: [mem 0x000f8000-0x000fbfff] [ 0.256076] pnp 00:0d: [mem 0x000fc000-0x000fffff] [ 0.256079] pnp 00:0d: [mem 0xbfff0000-0xbfffffff] [ 0.256082] pnp 00:0d: [mem 0xffff0000-0xffffffff] [ 0.256084] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.256089] pnp 00:0d: [mem 0x00100000-0xbffeffff] [ 0.256092] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.256094] pnp 00:0d: [mem 0xfee00000-0xfeefffff] [ 0.256097] pnp 00:0d: [mem 0xfefff000-0xfeffffff] [ 0.256100] pnp 00:0d: [mem 0xfff80000-0xfff80fff] [ 0.256103] pnp 00:0d: [mem 0xfff90000-0xfffbffff] [ 0.256105] pnp 00:0d: [mem 0xfffed000-0xfffeffff] [ 0.256200] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.256203] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.256207] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.256210] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.256214] system 00:0d: [mem 0xbfff0000-0xbfffffff] could not be reserved [ 0.256217] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved [ 0.256221] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.256224] system 00:0d: [mem 0x00100000-0xbffeffff] could not be reserved [ 0.256228] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.256231] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.256234] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved [ 0.256238] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.256241] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.256245] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.256249] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.256260] pnp: PnP ACPI: found 14 devices [ 0.256262] ACPI: ACPI bus type pnp unregistered [ 0.263661] Switching to clocksource acpi_pm [ 0.263707] PCI: max bus depth: 1 pci_try_num: 2 [ 0.263747] pci 0000:00:02.1: BAR 0: assigned [mem 0xdc005000-0xdc0050ff] [ 0.263752] pci 0000:00:02.1: BAR 0: set to [mem 0xdc005000-0xdc0050ff] (PCI address [0xdc005000-0xdc0050ff]) [ 0.263757] pci 0000:00:09.0: PCI bridge to [bus 05-05] [ 0.263761] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff] [ 0.263766] pci 0000:00:0b.0: PCI bridge to [bus 04-04] [ 0.263772] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.263777] pci 0000:00:0d.0: PCI bridge to [bus 02-02] [ 0.263784] pci 0000:01:00.0: BAR 6: assigned [mem 0xd5000000-0xd501ffff pref] [ 0.263787] pci 0000:00:0e.0: PCI bridge to [bus 01-01] [ 0.263790] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff] [ 0.263794] pci 0000:00:0e.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.263807] pci 0000:00:09.0: setting latency timer to 64 [ 0.263812] pci 0000:00:0b.0: setting latency timer to 64 [ 0.263817] pci 0000:00:0c.0: setting latency timer to 64 [ 0.263822] pci 0000:00:0d.0: setting latency timer to 64 [ 0.263826] pci 0000:00:0e.0: setting latency timer to 64 [ 0.263830] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.263833] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xffffffff] [ 0.263836] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff] [ 0.263839] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.263842] pci_bus 0000:00: resource 8 [mem 0x140000000-0xfcffffffff] [ 0.263845] pci_bus 0000:05: resource 1 [mem 0xd8000000-0xdbffffff] [ 0.263848] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.263850] pci_bus 0000:05: resource 5 [mem 0xc0000000-0xffffffff] [ 0.263853] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff] [ 0.263856] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff] [ 0.263859] pci_bus 0000:05: resource 8 [mem 0x140000000-0xfcffffffff] [ 0.263862] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd7ffffff] [ 0.263865] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.263980] NET: Registered protocol family 2 [ 0.263980] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.263980] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.273172] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.274412] TCP: Hash tables configured (established 524288 bind 65536) [ 0.274418] TCP reno registered [ 0.274439] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.274541] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.274816] NET: Registered protocol family 1 [ 0.275099] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.275126] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.344027] pci 0000:00:02.0: PCI INT A disabled [ 0.344158] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.344169] pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.344191] pci 0000:00:02.1: PCI INT B disabled [ 0.344247] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344253] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.344260] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344264] pci 0000:00:0b.0: Linking AER extended capability [ 0.344300] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344305] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.344312] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344315] pci 0000:00:0c.0: Linking AER extended capability [ 0.344354] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344359] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.344366] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344369] pci 0000:00:0d.0: Linking AER extended capability [ 0.344410] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344415] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.344422] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344425] pci 0000:00:0e.0: Linking AER extended capability [ 0.344457] pci 0000:01:00.0: Boot video device [ 0.344460] PCI: CLS 32 bytes, default 64 [ 0.344550] Unpacking initramfs... [ 0.642798] Freeing initrd memory: 10112k freed [ 0.656541] PCI-DMA: Disabling AGP. [ 0.656743] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.656745] PCI-DMA: using GART IOMMU. [ 0.656750] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.662054] audit: initializing netlink socket (disabled) [ 0.662087] type=2000 audit(1350543970.656:1): initialized [ 0.698969] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.741663] VFS: Disk quotas dquot_6.5.2 [ 0.741713] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.741819] msgmni has been set to 7933 [ 0.742077] alg: No test for stdrng (krng) [ 0.742131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.742136] io scheduler noop registered [ 0.742138] io scheduler deadline registered [ 0.742161] io scheduler cfq registered (default) [ 0.742351] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.742388] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X [ 0.742512] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.742531] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X [ 0.742627] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.742645] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X [ 0.742741] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.742759] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X [ 0.742862] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.742901] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.742903] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.743505] ERST: Table is not found! [ 0.743508] GHES: HEST is not enabled! [ 0.743595] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.763893] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.828658] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.840344] Linux agpgart interface v0.103 [ 0.840511] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.843908] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.843918] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.844145] mousedev: PS/2 mouse device common for all mice [ 0.844216] rtc_cmos 00:04: RTC can wake from S4 [ 0.844362] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.844389] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.844407] cpuidle: using governor ladder [ 0.844410] cpuidle: using governor menu [ 0.844678] TCP cubic registered [ 0.844749] NET: Registered protocol family 10 [ 0.845361] Mobile IPv6 [ 0.845365] NET: Registered protocol family 17 [ 0.845370] Registering the dns_resolver key type [ 0.845606] PM: Hibernation image not present or could not be loaded. [ 0.845624] registered taskstats version 1 [ 0.867347] rtc_cmos 00:04: setting system clock to 2012-10-18 07:06:11 UTC (1350543971) [ 0.867405] Initializing network drop monitor service [ 0.868986] Freeing unused kernel memory: 572k freed [ 0.869401] Write protecting the kernel read-only data: 6144k [ 0.872599] Freeing unused kernel memory: 668k freed [ 0.876649] Freeing unused kernel memory: 684k freed [ 0.896875] udevd[77]: starting version 175 [ 0.962401] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.962699] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 0.962730] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21 [ 0.962736] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 0.985293] SCSI subsystem initialized [ 0.995863] usbcore: registered new interface driver usbfs [ 0.995917] usbcore: registered new interface driver hub [ 1.003783] ACPI: Fan [FAN] (on) [ 1.013867] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.013874] ACPI: Thermal Zone [THRM] (40 C) [ 1.014237] usbcore: registered new device driver usb [ 1.015005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.028313] libata version 3.00 loaded. [ 1.045472] Floppy drive(s): fd0 is 1.44M [ 1.065380] FDC 0 is a post-1991 82077 [ 1.484810] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:13:d4:d2:71:01 [ 1.484817] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 1.485300] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 1.485357] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.485361] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.485405] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.485472] ehci_hcd 0000:00:02.1: debug port 1 [ 1.485478] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 1.485644] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdc005000 [ 1.496035] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.496070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.496074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.496076] usb usb1: Product: EHCI Host Controller [ 1.496078] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd [ 1.496081] usb usb1: SerialNumber: 0000:00:02.1 [ 1.496269] hub 1-0:1.0: USB hub found [ 1.496277] hub 1-0:1.0: 10 ports detected [ 1.497091] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.497117] sata_nv 0000:00:07.0: version 3.5 [ 1.497407] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 1.497434] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 1.497522] sata_nv 0000:00:07.0: setting latency timer to 64 [ 1.497957] scsi0 : sata_nv [ 1.498135] scsi1 : sata_nv [ 1.498284] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20 [ 1.498288] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20 [ 1.498575] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 1.498580] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 1.498654] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.499323] scsi2 : sata_nv [ 1.499471] scsi3 : sata_nv [ 1.499611] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23 [ 1.499614] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23 [ 1.500132] pata_amd 0000:00:06.0: version 0.4.1 [ 1.500258] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.500864] scsi4 : pata_amd [ 1.500977] scsi5 : pata_amd [ 1.501527] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.501530] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.502098] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 1.502139] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.502142] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.502165] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.502196] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdc004000 [ 1.558042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.558045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.558047] usb usb2: Product: OHCI Host Controller [ 1.558050] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd [ 1.558052] usb usb2: SerialNumber: 0000:00:02.0 [ 1.558247] hub 2-0:1.0: USB hub found [ 1.558257] hub 2-0:1.0: 10 ports detected [ 1.680307] ata5.00: ATAPI: TOSHIBA ODD-DVD SD-M1802, 1031, max UDMA/33 [ 1.680319] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c600) ACPI=0x701f (60:600:0x13) [ 1.712229] ata5.00: configured for UDMA/33 [ 1.808033] ata1: SATA link down (SStatus 0 SControl 300) [ 1.808039] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.941668] usb 1-1: New USB device found, idVendor=1058, idProduct=1003 [ 1.941671] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.941674] usb 1-1: Product: External HDD [ 1.941676] usb 1-1: Manufacturer: Western Digital [ 1.941679] usb 1-1: SerialNumber: 57442D574341563532343534363837 [ 1.945200] usbcore: registered new interface driver uas [ 1.968039] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.976248] ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/133 [ 1.976252] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 1.984219] ata3.00: configured for UDMA/133 [ 2.108028] usb 1-4: new high-speed USB device number 4 using ehci_hcd [ 2.120029] ata2: SATA link down (SStatus 0 SControl 300) [ 2.120319] scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 [ 2.241049] usb 1-4: New USB device found, idVendor=0424, idProduct=2502 [ 2.241052] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.241416] hub 1-4:1.0: USB hub found [ 2.241547] hub 1-4:1.0: 2 ports detected [ 2.588036] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.596133] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL01, max UDMA/100 [ 2.612119] ata4.00: configured for UDMA/100 [ 2.618122] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL01 PQ: 0 ANSI: 5 [ 2.619130] scsi 4:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-M1802 1031 PQ: 0 ANSI: 5 [ 2.656027] usb 2-2: new low-speed USB device number 2 using ohci_hcd [ 2.780465] ata6.00: ATA-6: ST340810A, 3.39, max UDMA/100 [ 2.780468] ata6.00: 78165360 sectors, multi 1: LBA [ 2.780478] ata6: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc000c600) ACPI=0x3f01f (20:600:0x13) [ 2.796391] ata6.00: configured for UDMA/100 [ 2.796542] scsi 5:0:0:0: Direct-Access ATA ST340810A 3.39 PQ: 0 ANSI: 5 [ 2.798780] Initializing USB Mass Storage driver... [ 2.798979] scsi6 : usb-storage 1-1:1.0 [ 2.799159] usbcore: registered new interface driver usb-storage [ 2.799163] USB Mass Storage support registered. [ 2.812645] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.812706] sd 2:0:0:0: [sda] Write Protect is off [ 2.812710] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.812735] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.815580] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.815585] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.815743] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.818464] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 2.818618] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 2.818980] sd 5:0:0:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 2.819040] sd 5:0:0:0: [sdb] Write Protect is off [ 2.819044] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.819068] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.827319] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.827392] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.827454] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 2.827514] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.868626] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.869641] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.870082] usb 2-2: New USB device found, idVendor=046d, idProduct=c512 [ 2.870087] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.870091] usb 2-2: Product: USB Receiver [ 2.870093] usb 2-2: Manufacturer: Logitech [ 2.874375] sdb: sdb1 sdb2 sdb3 [ 2.874974] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.176033] usb 2-5: new full-speed USB device number 3 using ohci_hcd [ 3.380058] usb 2-5: New USB device found, idVendor=046d, idProduct=08ad [ 3.380063] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.396383] usbcore: registered new interface driver usbhid [ 3.396389] usbhid: USB HID core driver [ 3.406426] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0 [ 3.406571] logitech 0003:046D:C512.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0 [ 3.417935] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input1 [ 3.418136] logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1 [ 3.763960] PM: Starting manual resume from disk [ 3.763968] PM: Hibernation image partition 8:2 present [ 3.763970] PM: Looking for hibernation image. [ 3.764371] PM: Image not found (code -22) [ 3.764376] PM: Hibernation image not present or could not be loaded. [ 3.768556] JFS: nTxBlock = 8192, nTxLock = 65536 [ 3.811995] scsi 6:0:0:0: Direct-Access WD 10EADS External 1.75 PQ: 0 ANSI: 4 [ 3.812990] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 3.813555] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.814802] sd 6:0:0:0: [sdc] Write Protect is off [ 3.814806] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 3.815803] sd 6:0:0:0: [sdc] No Caching mode page present [ 3.815839] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 3.818803] sd 6:0:0:0: [sdc] No Caching mode page present [ 3.818833] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4.295999] sdc: sdc1 sdc2 [ 4.299803] sd 6:0:0:0: [sdc] No Caching mode page present [ 4.299838] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4.299870] sd 6:0:0:0: [sdc] Attached SCSI disk [ 6.714147] udevd[429]: starting version 175 [ 8.283123] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 8.283136] ACPI: Power Button [PWRB] [ 8.283271] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 8.283275] ACPI: Power Button [PWRF] [ 8.364031] parport_pc 00:09: reported by Plug and Play ACPI [ 8.364093] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 8.648911] i2c i2c-0: nForce2 SMBus adapter at 0x4c00 [ 8.648956] i2c i2c-1: nForce2 SMBus adapter at 0x4c40 [ 8.735245] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 903kHz [ 9.232316] EDAC MC: Ver: 2.1.0 [ 9.302829] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 9.334535] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00) [ 9.334617] powernow-k8: fid 0xe (2200 MHz), vid 0x8 [ 9.334620] powernow-k8: fid 0xc (2000 MHz), vid 0xa [ 9.334622] powernow-k8: fid 0xa (1800 MHz), vid 0xc [ 9.334624] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 9.376528] MCE: In-kernel MCE decoding enabled. [ 9.611313] AMD64 EDAC driver v3.4.0 [ 9.611677] EDAC amd64: DRAM ECC disabled. [ 9.611702] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 9.611706] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 9.611709] (Note that use of the override may cause unknown side effects.) [ 9.789408] Linux media interface: v0.10 [ 9.790157] [drm] Initialized drm 1.1.0 20060810 [ 9.804540] Linux video capture interface: v2.00 [ 9.973294] IR NEC protocol handler initialized [ 10.254407] wmi: Mapper loaded [ 10.329197] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded [ 10.333281] cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected], frontend(s): 1 [ 10.333292] cx88[0]: TV tuner type 63, Radio tuner type -1 [ 10.533574] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 10.533593] snd_intel8x0 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 10.533734] snd_intel8x0 0000:00:04.0: setting latency timer to 64 [ 10.610220] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 10.610265] nouveau 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 10.610276] nouveau 0000:01:00.0: setting latency timer to 64 [ 10.613590] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x043000a4) [ 10.617749] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 10.699711] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 10.699723] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 10.699730] [drm] nouveau 0000:01:00.0: Bios version 05.43.02.66 [ 10.699738] [drm] nouveau 0000:01:00.0: TMDS table version 1.1 [ 10.699744] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [ 10.699753] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [ 10.699760] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04011312 00000000 [ 10.699766] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 10.699771] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 0004c080 [ 10.699780] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2 [ 10.699787] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 10.699794] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 10.699800] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 10.699807] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 10.699813] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 10.699826] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0D7 [ 10.700436] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE4D7 [ 10.712778] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9AA [ 10.712808] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB3B [ 10.715955] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEC19 [ 10.715963] [drm] nouveau 0000:01:00.0: mem timing table length unknown: 14 [ 10.735011] [drm] nouveau 0000:01:00.0: 2 available performance level(s) [ 10.735022] [drm] nouveau 0000:01:00.0: 0: core 300MHz shader 300MHz memory 1000MHz voltage 1300mV fanspeed 100% [ 10.735033] [drm] nouveau 0000:01:00.0: 1: core 500MHz shader 500MHz memory 1000MHz voltage 1400mV fanspeed 100% [ 10.735050] [drm] nouveau 0000:01:00.0: c: core 299MHz shader 299MHz memory 598MHz voltage 1300mV [ 10.735411] [TTM] Zone kernel: Available graphics memory: 2031992 kiB. [ 10.735416] [TTM] Initializing pool allocator. [ 10.735449] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM [ 10.743041] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 10.743231] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 10.763133] IR RC5(x) protocol handler initialized [ 10.806351] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.806359] [drm] No driver support for vblank timestamp query. [ 10.806373] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 10.806381] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 10.806388] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 10.806395] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 10.856033] intel8x0_measure_ac97_clock: measured 52906 usecs (2600 samples) [ 10.856037] intel8x0: clocking to 46883 [ 10.872946] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded [ 10.873432] cx2388x alsa driver version 0.0.9 loaded [ 10.889127] i2c-core: driver [tuner] using legacy suspend method [ 10.889133] i2c-core: driver [tuner] using legacy resume method [ 10.922713] tuner 2-0061: Tuner -1 found with type(s) Radio TV. [ 10.959211] tveeprom 2-0050: Hauppauge model 94009, rev C2A0, serial# 321130 [ 10.959216] tveeprom 2-0050: MAC address is 00:0d:fe:04:e6:6a [ 10.959220] tveeprom 2-0050: tuner model is Philips FMD1216ME (idx 100, type 63) [ 10.959224] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 10.959228] tveeprom 2-0050: audio processor is CX882 (idx 33) [ 10.959232] tveeprom 2-0050: decoder processor is CX882 (idx 25) [ 10.959235] tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter [ 10.959238] cx88[0]: hauppauge eeprom: model=94009 [ 10.972868] IR RC6 protocol handler initialized [ 11.020479] IR JVC protocol handler initialized [ 11.092736] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff8801381e9800 [ 11.092892] fbcon: nouveaufb (fb0) is primary device [ 11.106314] [drm] nouveau 0000:01:00.0: 0xD576: Parsing digital output script table [ 11.113934] IR Sony protocol handler initialized [ 11.155952] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [ 11.155956] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output C [ 11.157757] Console: switching to colour frame buffer device 160x64 [ 11.159404] fb0: nouveaufb frame buffer device [ 11.159407] drm: registered panic notifier [ 11.159420] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 11.166149] tuner-simple 2-0061: creating new instance [ 11.166156] tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 11.172663] IR MCE Keyboard/mouse protocol handler initialized [ 11.344038] Registered IR keymap rc-hauppauge [ 11.344363] input: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:09.0/0000:05:06.2/rc/rc0/input5 [ 11.344504] rc0: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:09.0/0000:05:06.2/rc/rc0 [ 11.344806] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input6 [ 11.344984] cx88[0]/2: cx2388x 8802 Driver Manager [ 11.345263] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 11.345306] cx88-mpeg driver manager 0000:05:06.2: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 11.345320] cx88[0]/2: found at 0000:05:06.2, rev: 5, irq: 16, latency: 32, mmio: 0xda000000 [ 11.356141] cx8800 0000:05:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 11.356161] cx88[0]/0: found at 0000:05:06.0, rev: 5, irq: 16, latency: 32, mmio: 0xd8000000 [ 11.357452] cx88[0]/0: registered device video0 [v4l2] [ 11.357607] cx88[0]/0: registered device vbi0 [ 11.357746] cx88[0]/0: registered device radio0 [ 11.361165] cx88_audio 0000:05:06.1: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 11.361248] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 11.442036] lirc_dev: IR Remote Control driver registered, major 250 [ 11.445974] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0 [ 11.445982] IR LIRC bridge handler initialized [ 11.630694] gspca_main: v2.14.0 registered [ 11.661597] gspca_main: zc3xx-2.14.0 probing 046d:08ad [ 11.755007] cx88/2: cx2388x dvb driver version 0.0.9 loaded [ 11.755017] cx88/2: registering cx8802 driver, type: dvb access: shared [ 11.755027] cx88[0]/2: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40] [ 11.755035] cx88[0]/2: cx2388x based DVB/ATSC card [ 11.755040] cx8802_alloc_frontends() allocating 1 frontend(s) [ 11.865952] tuner-simple 2-0061: attaching existing instance [ 11.865963] tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) [ 11.868953] DVB: registering new adapter (cx88[0]) [ 11.868963] DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)... [ 13.081281] input: zc3xx as /devices/pci0000:00/0000:00:02.0/usb2/2-5/input/input7 [ 13.081655] usbcore: registered new interface driver zc3xx [ 13.089407] usbcore: registered new interface driver snd-usb-audio [ 15.447301] Adding 1775176k swap on /dev/sda2. Priority:-1 extents:1 across:1775176k [ 15.481064] Adding 2047748k swap on /dev/sdb3. Priority:-2 extents:1 across:2047748k [ 23.737767] loop: module loaded [ 42.268697] fuse init (API version 7.17) [ 47.610981] RPC: Registered named UNIX socket transport module. [ 47.610990] RPC: Registered udp transport module. [ 47.610994] RPC: Registered tcp transport module. [ 47.610999] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 47.688577] FS-Cache: Loaded [ 47.763010] FS-Cache: Netfs 'nfs' registered for caching [ 47.787646] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 52.219716] vboxdrv: Found 2 processor cores. [ 52.220360] vboxdrv: fAsync=1 offMin=0x15683 offMax=0x15683 [ 52.220650] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 52.220655] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000). [ 53.246694] vboxpci: IOMMU not found (not registered) [ 55.792025] eth0: no IPv6 routers present [ 83.962082] Bluetooth: Core ver 2.16 [ 83.962154] NET: Registered protocol family 31 [ 83.962159] Bluetooth: HCI device and connection manager initialized [ 83.962170] Bluetooth: HCI socket layer initialized [ 83.962175] Bluetooth: L2CAP socket layer initialized [ 83.962189] Bluetooth: SCO socket layer initialized [ 84.024210] Bluetooth: RFCOMM TTY layer initialized [ 84.024232] Bluetooth: RFCOMM socket layer initialized [ 84.024236] Bluetooth: RFCOMM ver 1.11 [ 84.613674] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 84.613683] Bluetooth: BNEP filters: protocol multicast