[    28.364] 
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    28.364] X Protocol Version 11, Revision 0
[    28.364] Build Operating System: openSUSE SUSE LINUX
[    28.364] Current Operating System: Linux Athlon64X2-5000 3.4.5-0.1-desktop #5 SMP PREEMPT Tue Jul 17 14:16:39 CEST 2012 i686
[    28.364] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 resume=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part5 splash=silent quiet vga=0x31a
[    28.364] Build Date: 04 July 2012  05:48:23PM
[    28.365]  
[    28.365] Current version of pixman: 0.24.0
[    28.365] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    28.365] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.365] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 17 22:34:32 2012
[    28.365] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    28.365] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.367] (==) No Layout section.  Using the first Screen section.
[    28.367] (==) No screen section available. Using defaults.
[    28.367] (**) |-->Screen "Default Screen Section" (0)
[    28.367] (**) |   |-->Monitor "<default monitor>"
[    28.367] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    28.367] (==) Automatically adding devices
[    28.367] (==) Automatically enabling devices
[    28.367] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/URW/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/,
	built-ins
[    28.368] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    28.368] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.368] (II) Loader magic: 0x8234d40
[    28.368] (II) Module ABI versions:
[    28.368] 	X.Org ANSI C Emulation: 0.4
[    28.368] 	X.Org Video Driver: 10.0
[    28.368] 	X.Org XInput driver : 12.2
[    28.368] 	X.Org Server Extension : 5.0
[    28.369] (--) PCI:*(0:0:13:0) 10de:03d0:1043:8234 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[    28.370] (--) PCI: (0:1:8:0) 109e:036e:0070:13eb rev 17, Mem @ 0xfdfff000/4096
[    28.370] (II) Open ACPI successful (/var/run/acpid.socket)
[    28.370] (II) "extmod" will be loaded by default.
[    28.370] (II) "dbe" will be loaded by default.
[    28.370] (II) "glx" will be loaded by default.
[    28.370] (II) "record" will be loaded by default.
[    28.370] (II) "dri" will be loaded by default.
[    28.370] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[    28.370] (II) LoadModule: "dri2"
[    28.405] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    28.406] (II) Module dri2: vendor="X.Org Foundation"
[    28.406] 	compiled for 1.10.4, module version = 1.2.0
[    28.406] 	ABI class: X.Org Server Extension, version 5.0
[    28.406] (II) Loading extension DRI2
[    28.406] (II) LoadModule: "glamoregl"
[    28.428] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    28.431] (EE) Failed to load /usr/lib/xorg/modules/libglamoregl.so: /usr/lib/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
[    28.431] (EE) LoadModule: Module glamoregl does not have a glamoreglModuleData data object.
[    28.431] (II) UnloadModule: "glamoregl"
[    28.431] (II) Unloading glamoregl
[    28.431] (EE) Failed to load module "glamoregl" (invalid module, 0)
[    28.431] (II) LoadModule: "extmod"
[    28.432] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.432] (II) Module extmod: vendor="X.Org Foundation"
[    28.432] 	compiled for 1.10.4, module version = 1.0.0
[    28.432] 	Module class: X.Org Server Extension
[    28.432] 	ABI class: X.Org Server Extension, version 5.0
[    28.432] (II) Loading extension MIT-SCREEN-SAVER
[    28.432] (II) Loading extension XFree86-VidModeExtension
[    28.432] (II) Loading extension XFree86-DGA
[    28.432] (II) Loading extension DPMS
[    28.432] (II) Loading extension XVideo
[    28.432] (II) Loading extension XVideo-MotionCompensation
[    28.432] (II) Loading extension X-Resource
[    28.433] (II) LoadModule: "dbe"
[    28.433] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.433] (II) Module dbe: vendor="X.Org Foundation"
[    28.433] 	compiled for 1.10.4, module version = 1.0.0
[    28.434] 	Module class: X.Org Server Extension
[    28.434] 	ABI class: X.Org Server Extension, version 5.0
[    28.434] (II) Loading extension DOUBLE-BUFFER
[    28.434] (II) LoadModule: "glx"
[    28.434] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.435] (II) Module glx: vendor="X.Org Foundation"
[    28.435] 	compiled for 1.10.4, module version = 1.0.0
[    28.435] 	ABI class: X.Org Server Extension, version 5.0
[    28.435] (==) AIGLX enabled
[    28.435] (II) Loading extension GLX
[    28.435] (II) LoadModule: "record"
[    28.436] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    28.436] (II) Module record: vendor="X.Org Foundation"
[    28.436] 	compiled for 1.10.4, module version = 1.13.0
[    28.436] 	Module class: X.Org Server Extension
[    28.436] 	ABI class: X.Org Server Extension, version 5.0
[    28.436] (II) Loading extension RECORD
[    28.436] (II) LoadModule: "dri"
[    28.437] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    28.437] (II) Module dri: vendor="X.Org Foundation"
[    28.437] 	compiled for 1.10.4, module version = 1.0.0
[    28.437] 	ABI class: X.Org Server Extension, version 5.0
[    28.437] (II) Loading extension XFree86-DRI
[    28.437] (==) Matched nvidia as autoconfigured driver 0
[    28.437] (==) Matched nouveau as autoconfigured driver 1
[    28.437] (==) Matched fbdev as autoconfigured driver 2
[    28.437] (==) Matched vesa as autoconfigured driver 3
[    28.437] (==) Assigned the driver to the xf86ConfigLayout
[    28.437] (II) LoadModule: "nvidia"
[    28.440] (WW) Warning, couldn't open module nvidia
[    28.440] (II) UnloadModule: "nvidia"
[    28.440] (II) Unloading nvidia
[    28.440] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    28.440] (II) LoadModule: "nouveau"
[    28.441] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    28.441] (II) Module nouveau: vendor="X.Org Foundation"
[    28.441] 	compiled for 1.10.4, module version = 1.0.1
[    28.441] 	Module class: X.Org Video Driver
[    28.441] 	ABI class: X.Org Video Driver, version 10.0
[    28.441] (II) LoadModule: "fbdev"
[    28.442] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    28.442] (II) Module fbdev: vendor="X.Org Foundation"
[    28.442] 	compiled for 1.10.4, module version = 0.4.3
[    28.443] 	Module class: X.Org Video Driver
[    28.443] 	ABI class: X.Org Video Driver, version 10.0
[    28.443] (II) LoadModule: "vesa"
[    28.445] (WW) Warning, couldn't open module vesa
[    28.445] (II) UnloadModule: "vesa"
[    28.445] (II) Unloading vesa
[    28.445] (EE) Failed to load module "vesa" (module does not exist, 0)
[    28.445] (II) NOUVEAU driver 
[    28.445] (II) NOUVEAU driver for NVIDIA chipset families :
[    28.445] 	RIVA TNT        (NV04)
[    28.445] 	RIVA TNT2       (NV05)
[    28.445] 	GeForce 256     (NV10)
[    28.445] 	GeForce 2       (NV11, NV15)
[    28.445] 	GeForce 4MX     (NV17, NV18)
[    28.445] 	GeForce 3       (NV20)
[    28.446] 	GeForce 4Ti     (NV25, NV28)
[    28.446] 	GeForce FX      (NV3x)
[    28.446] 	GeForce 6       (NV4x)
[    28.446] 	GeForce 7       (G7x)
[    28.446] 	GeForce 8       (G8x)
[    28.446] 	GeForce GTX 200 (NVA0)
[    28.446] 	GeForce GTX 400 (NVC0)
[    28.446] (II) FBDEV: driver for framebuffer: fbdev
[    28.446] (++) using VT number 7

[    28.453] drmOpenDevice: node name is /dev/dri/card0
[    28.453] drmOpenDevice: open result is 8, (OK)
[    28.453] drmOpenByBusid: Searching for BusID pci:0000:00:0d.0
[    28.453] drmOpenDevice: node name is /dev/dri/card0
[    28.453] drmOpenDevice: open result is 8, (OK)
[    28.453] drmOpenByBusid: drmOpenMinor returns 8
[    28.453] drmOpenByBusid: drmGetBusid reports pci:0000:00:0d.0
[    28.453] (II) [drm] nouveau interface version: 1.0.0
[    28.453] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    28.453] (WW) Falling back to old probe method for fbdev
[    28.453] (II) Loading sub module "fbdevhw"
[    28.453] (II) LoadModule: "fbdevhw"
[    28.456] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    28.456] (II) Module fbdevhw: vendor="X.Org Foundation"
[    28.456] 	compiled for 1.10.4, module version = 0.0.2
[    28.456] 	ABI class: X.Org Video Driver, version 10.0
[    28.456] (II) Loading sub module "dri"
[    28.456] (II) LoadModule: "dri"
[    28.457] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    28.457] (II) Module dri: vendor="X.Org Foundation"
[    28.457] 	compiled for 1.10.4, module version = 1.0.0
[    28.457] 	ABI class: X.Org Server Extension, version 5.0
[    28.457] (II) NOUVEAU(0): Loaded DRI module
[    28.457] drmOpenDevice: node name is /dev/dri/card0
[    28.458] drmOpenDevice: open result is 9, (OK)
[    28.458] drmOpenDevice: node name is /dev/dri/card0
[    28.458] drmOpenDevice: open result is 9, (OK)
[    28.458] drmOpenByBusid: Searching for BusID pci:0000:00:0d.0
[    28.458] drmOpenDevice: node name is /dev/dri/card0
[    28.458] drmOpenDevice: open result is 9, (OK)
[    28.458] drmOpenByBusid: drmOpenMinor returns 9
[    28.458] drmOpenByBusid: drmGetBusid reports pci:0000:00:0d.0
[    28.458] (II) [drm] DRM interface version 1.4
[    28.458] (II) [drm] DRM open master succeeded.
[    28.458] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[    28.458] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    28.458] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    28.458] (==) NOUVEAU(0): RGB weight 888
[    28.458] (==) NOUVEAU(0): Default visual is TrueColor
[    28.458] (==) NOUVEAU(0): Using HW cursor
[    28.458] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    28.458] (==) NOUVEAU(0): Page flipping enabled
[    28.458] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    28.494] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    28.525] (II) NOUVEAU(0): EDID for output VGA-1
[    28.525] (II) NOUVEAU(0): Manufacturer: SAM  Model: 37b  Serial#: 1095840306
[    28.525] (II) NOUVEAU(0): Year: 2008  Week: 20
[    28.525] (II) NOUVEAU(0): EDID Version: 1.3
[    28.525] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    28.525] (II) NOUVEAU(0): Sync:  Separate  Composite  SyncOnGreen
[    28.525] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47  vert.: 30
[    28.525] (II) NOUVEAU(0): Gamma: 2.20
[    28.525] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[    28.525] (II) NOUVEAU(0): First detailed timing is preferred mode
[    28.525] (II) NOUVEAU(0): redX: 0.649 redY: 0.335   greenX: 0.283 greenY: 0.605
[    28.525] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.073   whiteX: 0.312 whiteY: 0.329
[    28.525] (II) NOUVEAU(0): Supported established timings:
[    28.525] (II) NOUVEAU(0): 720x400@70Hz
[    28.525] (II) NOUVEAU(0): 640x480@60Hz
[    28.525] (II) NOUVEAU(0): 640x480@67Hz
[    28.525] (II) NOUVEAU(0): 640x480@72Hz
[    28.525] (II) NOUVEAU(0): 640x480@75Hz
[    28.525] (II) NOUVEAU(0): 800x600@56Hz
[    28.525] (II) NOUVEAU(0): 800x600@60Hz
[    28.525] (II) NOUVEAU(0): 800x600@72Hz
[    28.525] (II) NOUVEAU(0): 800x600@75Hz
[    28.525] (II) NOUVEAU(0): 832x624@75Hz
[    28.525] (II) NOUVEAU(0): 1024x768@60Hz
[    28.525] (II) NOUVEAU(0): 1024x768@70Hz
[    28.525] (II) NOUVEAU(0): 1024x768@75Hz
[    28.526] (II) NOUVEAU(0): 1280x1024@75Hz
[    28.526] (II) NOUVEAU(0): 1152x864@75Hz
[    28.526] (II) NOUVEAU(0): Manufacturer's mask: 0
[    28.526] (II) NOUVEAU(0): Supported standard timings:
[    28.526] (II) NOUVEAU(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    28.526] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    28.526] (II) NOUVEAU(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    28.526] (II) NOUVEAU(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    28.526] (II) NOUVEAU(0): Supported detailed timing:
[    28.526] (II) NOUVEAU(0): clock: 119.0 MHz   Image Size:  474 x 296 mm
[    28.526] (II) NOUVEAU(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[    28.526] (II) NOUVEAU(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
[    28.526] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[    28.526] (II) NOUVEAU(0): Monitor name: SyncMaster
[    28.526] (II) NOUVEAU(0): Serial No: H9XQ505442
[    28.526] (II) NOUVEAU(0): EDID (in hex):
[    28.526] (II) NOUVEAU(0): 	00ffffffffffff004c2d7b0332325141
[    28.526] (II) NOUVEAU(0): 	141201030e2f1e782a78f1a655489b26
[    28.526] (II) NOUVEAU(0): 	125054bfef80b30081808140714f0101
[    28.526] (II) NOUVEAU(0): 	0101010101017c2e90a0601a1e403020
[    28.526] (II) NOUVEAU(0): 	3600da281100001a000000fd00384b1e
[    28.526] (II) NOUVEAU(0): 	510e000a202020202020000000fc0053
[    28.526] (II) NOUVEAU(0): 	796e634d61737465720a2020000000ff
[    28.526] (II) NOUVEAU(0): 	00483958513530353434320a20200042
[    28.526] (II) NOUVEAU(0): EDID vendor "SAM", prod id 891
[    28.526] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    28.526] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    28.526] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    28.526] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    28.526] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    28.526] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    28.527] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    28.527] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    28.527] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    28.528] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    28.528] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    28.528] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    28.528] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    28.528] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    28.528] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    28.528] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    28.528] (II) NOUVEAU(0): Output VGA-1 connected
[    28.528] (II) NOUVEAU(0): Using exact sizes for initial modes
[    28.528] (II) NOUVEAU(0): Output VGA-1 using initial mode 1680x1050
[    28.528] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    28.528] (--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[    28.528] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[    28.528] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    28.528] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    28.528] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    28.528] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    28.528] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    28.528] (**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[    28.528] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    28.528] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    28.528] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    28.528] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    28.528] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    28.528] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    28.528] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    28.528] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    28.528] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    28.528] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    28.528] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    28.529] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    28.529] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    28.529] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    28.529] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    28.529] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    28.529] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    28.529] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    28.529] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    28.529] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    28.529] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    28.529] (**) NOUVEAU(0): Display dimensions: (470, 300) mm
[    28.529] (**) NOUVEAU(0): DPI set to (90, 88)
[    28.529] (II) Loading sub module "fb"
[    28.529] (II) LoadModule: "fb"
[    28.530] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.530] (II) Module fb: vendor="X.Org Foundation"
[    28.530] 	compiled for 1.10.4, module version = 1.0.0
[    28.531] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    28.531] (II) Loading sub module "exa"
[    28.531] (II) LoadModule: "exa"
[    28.531] (II) Loading /usr/lib/xorg/modules/libexa.so
[    28.531] (II) Module exa: vendor="X.Org Foundation"
[    28.531] 	compiled for 1.10.4, module version = 2.5.0
[    28.531] 	ABI class: X.Org Video Driver, version 10.0
[    28.531] (II) Loading sub module "shadowfb"
[    28.531] (II) LoadModule: "shadowfb"
[    28.533] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    28.533] (II) Module shadowfb: vendor="X.Org Foundation"
[    28.533] 	compiled for 1.10.4, module version = 1.0.0
[    28.533] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    28.533] (II) UnloadModule: "fbdev"
[    28.533] (II) Unloading fbdev
[    28.533] (II) UnloadModule: "fbdevhw"
[    28.533] (II) Unloading fbdevhw
[    28.533] (--) Depth 24 pixmap format is 32 bpp
[    28.534] (II) NOUVEAU(0): Opened GPU channel 1
[    28.536] (II) NOUVEAU(0): [DRI2] Setup complete
[    28.536] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    28.536] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    28.537] (II) EXA(0): Driver allocated offscreen pixmaps
[    28.537] (II) EXA(0): Driver registered support for the following operations:
[    28.537] (II)         Solid
[    28.537] (II)         Copy
[    28.537] (II)         Composite (RENDER acceleration)
[    28.537] (II)         UploadToScreen
[    28.537] (II)         DownloadFromScreen
[    28.537] (==) NOUVEAU(0): Backing store disabled
[    28.537] (==) NOUVEAU(0): Silken mouse enabled
[    28.538] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[    28.538] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    28.538] (==) NOUVEAU(0): DPMS enabled
[    28.538] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    28.539] (--) RandR disabled
[    28.539] (II) Initializing built-in extension Generic Event Extension
[    28.539] (II) Initializing built-in extension SHAPE
[    28.539] (II) Initializing built-in extension MIT-SHM
[    28.540] (II) Initializing built-in extension XInputExtension
[    28.540] (II) Initializing built-in extension XTEST
[    28.540] (II) Initializing built-in extension BIG-REQUESTS
[    28.540] (II) Initializing built-in extension SYNC
[    28.540] (II) Initializing built-in extension XKEYBOARD
[    28.540] (II) Initializing built-in extension XC-MISC
[    28.540] (II) Initializing built-in extension SECURITY
[    28.540] (II) Initializing built-in extension XINERAMA
[    28.540] (II) Initializing built-in extension XFIXES
[    28.540] (II) Initializing built-in extension RENDER
[    28.540] (II) Initializing built-in extension RANDR
[    28.540] (II) Initializing built-in extension COMPOSITE
[    28.540] (II) Initializing built-in extension DAMAGE
[    28.613] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    28.613] (II) AIGLX: enabled GLX_INTEL_swap_event
[    28.613] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    28.613] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    28.614] (II) AIGLX: Loaded and initialized /usr/lib/dri/nouveau_dri.so
[    28.615] (II) GLX: Initialized DRI2 GL provider for screen 0
[    28.623] (II) NOUVEAU(0): NVEnterVT is called.
[    28.624] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[    28.624] resize called 1680 1050
[    28.715] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    28.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.715] (**) Power Button: Applying InputClass "LocalKeyboard"
[    28.715] (II) LoadModule: "evdev"
[    28.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.715] (II) Module evdev: vendor="X.Org Foundation"
[    28.715] 	compiled for 1.10.4, module version = 2.6.0
[    28.715] 	Module class: X.Org XInput Driver
[    28.715] 	ABI class: X.Org XInput driver, version 12.2
[    28.716] (II) Using input driver 'evdev' for 'Power Button'
[    28.716] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.716] (**) Power Button: always reports core events
[    28.716] (**) Power Button: Device: "/dev/input/event3"
[    28.716] (--) Power Button: Found keys
[    28.716] (II) Power Button: Configuring as keyboard
[    28.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    28.716] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    28.716] (**) Option "xkb_rules" "evdev"
[    28.716] (**) Option "xkb_model" "evdev"
[    28.716] (**) Option "xkb_layout" "de"
[    28.716] (**) Option "xkb_variant" "nodeadkeys"
[    28.749] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.749] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.749] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.749] (**) Power Button: Applying InputClass "LocalKeyboard"
[    28.749] (II) Using input driver 'evdev' for 'Power Button'
[    28.749] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.749] (**) Power Button: always reports core events
[    28.749] (**) Power Button: Device: "/dev/input/event2"
[    28.749] (--) Power Button: Found keys
[    28.749] (II) Power Button: Configuring as keyboard
[    28.749] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    28.749] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    28.749] (**) Option "xkb_rules" "evdev"
[    28.749] (**) Option "xkb_model" "evdev"
[    28.749] (**) Option "xkb_layout" "de"
[    28.749] (**) Option "xkb_variant" "nodeadkeys"
[    28.751] (II) config/udev: Adding input device gspca_sn9c20x (/dev/input/event5)
[    28.751] (**) gspca_sn9c20x: Applying InputClass "evdev keyboard catchall"
[    28.751] (**) gspca_sn9c20x: Applying InputClass "evdev keyboard catchall"
[    28.751] (**) gspca_sn9c20x: Applying InputClass "LocalKeyboard"
[    28.751] (II) Using input driver 'evdev' for 'gspca_sn9c20x'
[    28.751] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.751] (**) gspca_sn9c20x: always reports core events
[    28.751] (**) gspca_sn9c20x: Device: "/dev/input/event5"
[    28.751] (--) gspca_sn9c20x: Found keys
[    28.751] (II) gspca_sn9c20x: Configuring as keyboard
[    28.752] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/input/input5/event5"
[    28.752] (II) XINPUT: Adding extended input device "gspca_sn9c20x" (type: KEYBOARD)
[    28.752] (**) Option "xkb_rules" "evdev"
[    28.752] (**) Option "xkb_model" "evdev"
[    28.752] (**) Option "xkb_layout" "de"
[    28.752] (**) Option "xkb_variant" "nodeadkeys"
[    28.762] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    28.762] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.762] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.762] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[    28.762] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    28.762] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.762] (**) AT Translated Set 2 keyboard: always reports core events
[    28.762] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    28.762] (--) AT Translated Set 2 keyboard: Found keys
[    28.762] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    28.762] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    28.762] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    28.762] (**) Option "xkb_rules" "evdev"
[    28.762] (**) Option "xkb_model" "evdev"
[    28.762] (**) Option "xkb_layout" "de"
[    28.762] (**) Option "xkb_variant" "nodeadkeys"
[    28.763] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event1)
[    28.763] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall"
[    28.763] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall"
[    28.763] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse'
[    28.763] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.763] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
[    28.763] (**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event1"
[    28.763] (--) ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
[    28.763] (--) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
[    28.763] (--) ImExPS/2 Logitech Explorer Mouse: Found relative axes
[    28.763] (--) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
[    28.763] (II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
[    28.763] (II) ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support
[    28.763] (**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
[    28.763] (**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.763] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[    28.763] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
[    28.763] (II) ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.
[    28.764] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
[    28.764] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0
[    28.764] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000
[    28.764] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4
[    28.764] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0)
[    28.764] (II) No input driver/identifier specified (ignoring)
[    28.764] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    28.764] (II) No input driver/identifier specified (ignoring)
[    34.551] (II) NOUVEAU(0): EDID vendor "SAM", prod id 891
[    34.551] (II) NOUVEAU(0): Using hsync ranges from config file
[    34.551] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    34.551] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    34.551] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    34.551] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    49.775] (II) NOUVEAU(0): EDID vendor "SAM", prod id 891
[    49.775] (II) NOUVEAU(0): Using hsync ranges from config file
[    49.775] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    49.775] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    49.775] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    49.775] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    49.775] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    49.775] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    49.776] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[   157.099] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[   159.052] 
[   159.052] ==================== GDB Backtrace ============
[   159.052] 
[   159.052] Done by /usr/bin/xorg-backtrace V1.0
[   159.052] 
[   159.052] Missing separate debuginfo for /usr/bin/Xorg
[   159.052] Try: zypper install -C "debuginfo(build-id)=c73297f42063cf3b782667a285b341b0fea5db66"
[   159.052] Missing separate debuginfo for /lib/libudev.so.0
[   159.052] Try: zypper install -C "debuginfo(build-id)=4e4431209e241e10aa2e794a60ef43746da3b4ba"
[   159.052] Missing separate debuginfo for /lib/libcrypto.so.1.0.0
[   159.052] Try: zypper install -C "debuginfo(build-id)=c7d439e3342b34285afea5d585428c81014dbe45"
[   159.052] Missing separate debuginfo for /lib/libdl.so.2
[   159.052] Try: zypper install -C "debuginfo(build-id)=e836358b9da37bddf9adaa7430eb92a0a0b19d16"
[   159.052] Missing separate debuginfo for /usr/lib/libpciaccess.so.0
[   159.052] Try: zypper install -C "debuginfo(build-id)=a0524602fd2712e40baac784e4bb9917efcb3e98"
[   159.052] Install following debug packages to improve backtrace:
[   159.052] 	xorg-x11-server-debug*
[   159.052] Missing separate debuginfo for /lib/libpthread.so.0
[   159.052] Try: zypper install -C "debuginfo(build-id)=593f40f908f51dd863dc2cf94b9cb76bd0bae3d8"
[   159.052] Missing separate debuginfo for /usr/lib/libpixman-1.so.0
[   159.052] Try: zypper install -C "debuginfo(build-id)=3afd7b40cafc7f3a4e0824a83cc86d320683fc3a"
[   159.052] Missing separate debuginfo for /usr/lib/libXfont.so.1
[   159.052] Try: zypper install -C "debuginfo(build-id)=070a1f80c219e0d7b3f5aabadbcbbd30bc541f38"
[   159.052] Missing separate debuginfo for /usr/lib/libXau.so.6
[   159.052] Try: zypper install -C "debuginfo(build-id)=afd35ae4858dfc12e3bf960e0929293f2823e71b"
[   159.052] Missing separate debuginfo for /usr/lib/libXdmcp.so.6
[   159.052] Try: zypper install -C "debuginfo(build-id)=09941bb50a70fb253b4783ecbf44bfd0d9f48300"
[   159.052] Missing separate debuginfo for /lib/libm.so.6
[   159.053] Try: zypper install -C "debuginfo(build-id)=4ef73322578ad9d7b9bb042f0d8c31aecbd2c52d"
[   159.053] Missing separate debuginfo for /lib/librt.so.1
[   159.053] Try: zypper install -C "debuginfo(build-id)=c1cd870bd6083af5996fbb10104d4b65ffde6fd6"
[   159.053] Missing separate debuginfo for /lib/libc.so.6
[   159.053] Try: zypper install -C "debuginfo(build-id)=782d835f454ecfa3cdd590574b59c139283cf7ea"
[   159.053] Missing separate debuginfo for /lib/libz.so.1
[   159.053] Try: zypper install -C "debuginfo(build-id)=e6ae785810970e4c7adff3aaf6c881bc98d62318"
[   159.053] Missing separate debuginfo for /lib/ld-linux.so.2
[   159.053] Try: zypper install -C "debuginfo(build-id)=39c1043d2fcf5b72a2199cfb765d020b1faeb863"
[   159.053] Missing separate debuginfo for /usr/lib/libfreetype.so.6
[   159.053] Try: zypper install -C "debuginfo(build-id)=890c6bbe32920a4993824ca11f5c0c22a32bbfc5"
[   159.053] Missing separate debuginfo for /usr/lib/libfontenc.so.1
[   159.053] Try: zypper install -C "debuginfo(build-id)=2074bac44e1411ff16dd3898eca355ac8e430f28"
[   159.053] Missing separate debuginfo for /lib/libgcc_s.so.1
[   159.053] Try: zypper install -C "debuginfo(build-id)=781d12a4ff2a2c129a7b17b5329ffa772b7ade87"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/extensions/libdri2.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=bdc42e218f8aabfee0600d4c5c500c8c75062004"
[   159.053] Missing separate debuginfo for /usr/lib/libdrm.so.2
[   159.053] Try: zypper install -C "debuginfo(build-id)=7d771f617efae859bc94858904ea79b38bbce9bd"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/extensions/libextmod.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=b5601c8467ff2d7f6759c04b5b04723c8cdc1fcc"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/extensions/libdbe.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=df3097d2a2533d70f9c8bf0a3b1978acdffb7904"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/extensions/libglx.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=79a1418bf175dcc92a0c011f8297263a2215d7b9"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/extensions/librecord.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=dcd567a7fd14fe3113c06e5e9fccdfb95ab8d7dc"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/extensions/libdri.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=df8885874077fbc86914da79394273ef2e53150f"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=c000fc9df193cc5e804fb6c6b5589d49a99fe469"
[   159.053] Missing separate debuginfo for /usr/lib/libdrm_nouveau.so.2
[   159.053] Try: zypper install -C "debuginfo(build-id)=b7cac8366a1453c3099af2ec71ae765802277cbc"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=7bb84ac9e9be33baf407bd06faac1a1467d6341d"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/libfbdevhw.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=f1663f7f1b090c7072d0dc7cba8e1c05bfadc7b3"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/libfb.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=b71d32f06d1a49ee73c0e3f3144ec33716175956"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/libexa.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=c7f70fe07699613048e21b7350a53f87eab690a1"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/libshadowfb.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=0dfd81fe354a223b6de6095661174bb8f103c016"
[   159.053] Missing separate debuginfo for /usr/lib/dri/nouveau_dri.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=30e3bffdab644ee51d54618fe3e15f3ab8fdbaa9"
[   159.053] Missing separate debuginfo for /lib/libexpat.so.1
[   159.053] Try: zypper install -C "debuginfo(build-id)=ab3c04618d6bf2f8d56fcb0785a71782c525dc61"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMX86CodeGen.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=9fd9bbc42f5d0cc23c01e24f83b86e83eeb404bc"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMX86Disassembler.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=63fa9f39a4659cfe55dab291eeeb7afdcd3134c4"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMX86Desc.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=641e9190d5f18e1ccf7bc725524ba52a0a363e0e"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMX86Info.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=090eeeeaec3356183d64e6892ebdd72c78a78f84"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMJIT.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=ea2b9dacd9a8fa59b296675a9ddfde41b6a63b52"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMExecutionEngine.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=1f90aa430aefb5cd1ac1a55d15160127bf027de7"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMScalarOpts.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=4341f2cd4f4a058914bc07656e48c40dbb689ec6"
[   159.053] 	xorg-x11-driver-video-debug*
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMAnalysis.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=9c69da6acac2087e4317d269d86c26c1987a7dcb"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMTarget.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=280e934bec26c5d56c308c58472fdc5fc4fdc728"
[   159.053] 	xorg-x11-driver-input-debug*
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMCore.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=c9ee560187d54ca9545ed6c7a82cdb82484cc90a"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMSupport.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=f7e035f04dd2eae36b543da1135458a9a63c5250"
[   159.053] Missing separate debuginfo for /usr/lib/libstdc++.so.6
[   159.053] Try: zypper install -C "debuginfo(build-id)=85d8e10166789a622528c526ab981732d4c7e9ab"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMAsmPrinter.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=a6269a4adb3994df0ad91fea0699d5a801b64455"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMCodeGen.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=4a03dd6ee9bef4f0d50ed83709d23aaa0ca16ef2"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMMC.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=cc34beaff3f31e8138c8766efc0780ee8b685bf1"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMSelectionDAG.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=f62769f1113cc2ddad9bfd1af17f383903958b67"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMX86AsmPrinter.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=6140d450b40406505094a7149731ebfe62c5a80c"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMX86Utils.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=1757359e4217f516fd4abc483d71c4d6f52f05d1"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMInstCombine.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=afe3041fa509e684911ab0660c1914487209b737"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMTransformUtils.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=22cadf7960af132dbc188d7f3594638a76a072a4"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMMCParser.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=45d427604a54e9dab973ae90cb8237754b520c18"
[   159.053] Missing separate debuginfo for /usr/lib/libLLVMipa.so
[   159.053] Try: zypper install -C "debuginfo(build-id)=9de7e51f6a795bc9582acb20a524bcbaaa0936c4"
[   159.053] Missing separate debuginfo for /usr/lib/xorg/modules/input/evdev_drv.so
[   159.054] Try: zypper install -C "debuginfo(build-id)=814d1fe52bc6626f947d9eb13806bbe365fa5049"
[   159.054] 	libpixman-1-0-debug*
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] No symbol table is loaded.  Use the "file" command.
[   159.054] 	libpciaccess0-debug*
[   159.054] 
[   159.054] GNU gdb (GDB) SUSE (7.3-41.1.2)
[   159.054] This GDB was configured as "i586-suse-linux".
[   159.054] 
[   159.054] ==================== Backtrace ================
[   159.054] 
[   159.054] Thread 1 (Thread 0xb72487e0 (LWP 1112)):
[   159.054] 
[   159.054] 
[   159.054] #0  0xb758243e in __waitpid_nocancel () from /lib/libpthread.so.0
[   159.054] 
[   159.054] #1  0x080a8803 in xorg_backtrace ()
[   159.054] 
[   159.054] #2  0x080a28b1 in mieqEnqueue ()
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #3  0x080ca0b0 in xf86PostMotionEventM ()
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #4  0x080ca1ff in xf86PostMotionEventP ()
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #5  0xb713bdde in ?? () from /usr/lib/xorg/modules/input/evdev_drv.so
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #6  0xb713cf0d in ?? () from /usr/lib/xorg/modules/input/evdev_drv.so
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #7  0x080b6d51 in ?? ()
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #8  0x081720e2 in ?? ()
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #9  <signal handler called>
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #10 0xb73bf334 in ioctl () from /lib/libc.so.6
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #11 0xb71ff054 in drmIoctl () from /usr/lib/libdrm.so.2
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #12 0xb7201bac in drmCommandWrite () from /usr/lib/libdrm.so.2
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #13 0xb713104a in nouveau_bo_wait () from /usr/lib/libdrm_nouveau.so.2
[   159.054] No symbol table info available.
[   159.054] 
[   159.054] 
[   159.054] #14 0xb71310c9 in nouveau_bo_map () from /usr/lib/libdrm_nouveau.so.2
[   159.054] No symbol table info available.
[   159.054] 
[   159.055] 
[   159.055] #15 0xb713274c in nouveau_pushbuf_space () from /usr/lib/libdrm_nouveau.so.2
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #16 0xb71677b1 in ?? () from /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #17 0xb715ca6e in ?? () from /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #18 0xb70faa8a in ?? () from /usr/lib/xorg/modules/libexa.so
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #19 0xb70fab7c in ?? () from /usr/lib/xorg/modules/libexa.so
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #20 0x081a397c in miCopyRegion ()
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #21 0x081a3ed8 in miDoCopy ()
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #22 0xb70f9c6a in ?? () from /usr/lib/xorg/modules/libexa.so
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #23 0x0812ee32 in ?? ()
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #24 0x08106c69 in ?? ()
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #25 0x08108117 in ?? ()
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #26 0x08075a47 in ?? ()
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #27 0x0806883c in ?? ()
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #28 0xb730b003 in __libc_start_main () from /lib/libc.so.6
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] #29 0x08068b51 in _start ()
[   159.055] No symbol table info available.
[   159.055] 
[   159.055] 
[   159.055] ==================== Backtrace End ============
[   159.055] 
[   159.055] 
[   159.055] ==================== dmesg output =============
[   159.055] 
[   159.055] [    0.000000] Initializing cgroup subsys cpuset
[   159.055] [    0.000000] Initializing cgroup subsys cpu
[   159.055] [    0.000000] Linux version 3.4.5-0.1-desktop (root@Athlon64X2-5000) (gcc version 4.6.2 (SUSE Linux) ) #5 SMP PREEMPT Tue Jul 17 14:16:39 CEST 2012
[   159.055] [    0.000000] BIOS-provided physical RAM map:
[   159.055] [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[   159.055] [    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[   159.055] [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[   159.055] [    0.000000]  BIOS-e820: 0000000000100000 - 00000000afee0000 (usable)
[   159.055] [    0.000000]  BIOS-e820: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
[   159.055] [    0.000000]  BIOS-e820: 00000000afee3000 - 00000000afef0000 (ACPI data)
[   159.055] [    0.000000]  BIOS-e820: 00000000afef0000 - 00000000aff00000 (reserved)
[   159.055] [    0.000000]  BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
[   159.055] [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[   159.055] [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[   159.055] [    0.000000]  BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
[   159.055] [    0.000000] NX (Execute Disable) protection: active
[   159.055] [    0.000000] DMI 2.4 present.
[   159.055] [    0.000000] DMI: System manufacturer System Product Name/M2N-VM DH, BIOS ASUS M2N-VM DH ACPI BIOS Revision 1503 09/16/2010
[   159.055] [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[   159.055] [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[   159.055] [    0.000000] last_pfn = 0x1a0000 max_arch_pfn = 0x1000000
[   159.055] [    0.000000] MTRR default type: uncachable
[   159.055] [    0.000000] MTRR fixed ranges enabled:
[   159.055] [    0.000000]   00000-9FFFF write-back
[   159.055] [    0.000000]   A0000-BFFFF uncachable
[   159.055] [    0.000000]   C0000-C7FFF write-protect
[   159.055] [    0.000000]   C8000-FFFFF uncachable
[   159.055] [    0.000000] MTRR variable ranges enabled:
[   159.055] [    0.000000]   0 base 0000000000 mask FF80000000 write-back
[   159.055] [    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[   159.055] [    0.000000]   2 base 0100000000 mask FF80000000 write-back
[   159.056] [    0.000000]   3 base 0180000000 mask FFE0000000 write-back
[   159.056] [    0.000000]   4 disabled
[   159.056] [    0.000000]   5 disabled
[   159.056] [    0.000000]   6 disabled
[   159.056] [    0.000000]   7 disabled
[   159.056] [    0.000000] TOM2: 00000001a0000000 aka 6656M
[   159.056] [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[   159.056] [    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[   159.056] [    0.000000] found SMP MP-table at [c00f54d0] f54d0
[   159.056] [    0.000000] initial memory mapped : 0 - 01000000
[   159.056] [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[   159.056] [    0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[   159.056] [    0.000000]  0000000000 - 0000200000 page 4k
[   159.056] [    0.000000]  0000200000 - 0037000000 page 2M
[   159.056] [    0.000000]  0037000000 - 00371fe000 page 4k
[   159.056] [    0.000000] kernel direct mapping tables up to 371fe000 @ ff6000-1000000
[   159.056] [    0.000000] RAMDISK: 367f2000 - 37ff0000
[   159.056] [    0.000000] Allocated new RAMDISK: 34ff4000 - 367f1fb2
[   159.056] [    0.000000] Move RAMDISK from 00000000367f2000 - 0000000037feffb1 to 34ff4000 - 367f1fb1
[   159.056] [    0.000000] ACPI: RSDP 000f7060 00024 (v02 Nvidia)
[   159.056] [    0.000000] ACPI: XSDT afee30c0 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[   159.056] [    0.000000] ACPI: FACP afeeb840 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[   159.056] [    0.000000] ACPI: DSDT afee3240 0858F (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
[   159.056] [    0.000000] ACPI: FACS afee0000 00040
[   159.056] [    0.000000] ACPI: SSDT afeeba40 0028A (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[   159.056] [    0.000000] ACPI: MCFG afeebd40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[   159.056] [    0.000000] ACPI: APIC afeeb980 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[   159.056] [    0.000000] ACPI: Local APIC address 0xfee00000
[   159.056] [    0.000000] No NUMA configuration found
[   159.056] [    0.000000] Faking a node at 0000000000000000-00000001a0000000
[   159.056] [    0.000000] node 0 pfn: [0 - 1a0000]
[   159.056] [    0.000000] remap_alloc: node 0 [19ca00000-1a0000000) -> [f1800000-f4e00000)
[   159.056] [    0.000000] Initmem setup node 0 0000000000000000-00000001a0000000
[   159.056] [    0.000000]   NODE_DATA [0000000031800000 - 0000000031801fff] (remapped)
[   159.056] [    0.000000] 5774MB HIGHMEM available.
[   159.056] [    0.000000] 881MB LOWMEM available.
[   159.056] [    0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[   159.056] [    0.000000] Low memory ends at vaddr f71fe000
[   159.056] [    0.000000] High memory starts at vaddr f71fe000
[   159.056] [    0.000000]   mapped low ram: 0 - 371fe000
[   159.056] [    0.000000]   low ram: 0 - 371fe000
[   159.056] [    0.000000] Node: 0, start_pfn: 10, end_pfn: 9f
[   159.056] [    0.000000]   Setting physnode_map array to node 0 for pfns:
[   159.056] [    0.000000]   10 
[   159.056] [    0.000000] Node: 0, start_pfn: 100, end_pfn: afee0
[   159.056] [    0.000000]   Setting physnode_map array to node 0 for pfns:
[   159.056] [    0.000000]   100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100 58100 5c100 60100 64100 68100 6c100 70100 74100 78100 7c100 80100 84100 88100 8c100 90100 94100 98100 9c100 a0100 a4100 a8100 ac100 
[   159.056] [    0.000000] Node: 0, start_pfn: 100000, end_pfn: 1a0000
[   159.056] [    0.000000]   Setting physnode_map array to node 0 for pfns:
[   159.056] [    0.000000]   100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 140000 144000 148000 14c000 150000 154000 158000 15c000 160000 164000 168000 16c000 170000 174000 178000 17c000 180000 184000 188000 18c000 190000 194000 198000 19c000 
[   159.056] [    0.000000] Zone PFN ranges:
[   159.056] [    0.000000]   DMA      0x00000010 -> 0x00001000
[   159.056] [    0.000000]   Normal   0x00001000 -> 0x000371fe
[   159.056] [    0.000000]   HighMem  0x000371fe -> 0x001a0000
[   159.056] [    0.000000] Movable zone start PFN for each node
[   159.056] [    0.000000] Early memory PFN ranges
[   159.056] [    0.000000]     0: 0x00000010 -> 0x0000009f
[   159.056] [    0.000000]     0: 0x00000100 -> 0x000afee0
[   159.056] [    0.000000]     0: 0x00100000 -> 0x001a0000
[   159.056] [    0.000000] On node 0 totalpages: 1375855
[   159.056] [    0.000000] free_area_init_node: node 0, pgdat f1800000, node_mem_map f1802200
[   159.056] [    0.000000]   DMA zone: 32 pages used for memmap
[   159.056] [    0.000000]   DMA zone: 0 pages reserved
[   159.056] [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[   159.056] [    0.000000]   Normal zone: 1732 pages used for memmap
[   159.056] [    0.000000]   Normal zone: 219962 pages, LIFO batch:31
[   159.056] [    0.000000]   HighMem zone: 11549 pages used for memmap
[   159.056] [    0.000000]   HighMem zone: 1138629 pages, LIFO batch:31
[   159.056] [    0.000000] Using APIC driver default
[   159.056] [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[   159.056] [    0.000000] If you got timer trouble try acpi_use_timer_override
[   159.056] [    0.000000] ACPI: PM-Timer IO Port: 0x1008
[   159.056] [    0.000000] ACPI: Local APIC address 0xfee00000
[   159.056] [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[   159.056] [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[   159.056] [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[   159.056] [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[   159.056] [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[   159.056] [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[   159.056] [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[   159.056] [    0.000000] ACPI: BIOS IRQ0 override ignored.
[   159.056] [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[   159.056] [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[   159.056] [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[   159.056] [    0.000000] ACPI: IRQ9 used by override.
[   159.056] [    0.000000] ACPI: IRQ14 used by override.
[   159.056] [    0.000000] ACPI: IRQ15 used by override.
[   159.056] [    0.000000] Using ACPI (MADT) for SMP configuration information
[   159.056] [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[   159.056] [    0.000000] nr_irqs_gsi: 40
[   159.056] [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[   159.056] [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[   159.056] [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[   159.056] [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[   159.056] [    0.000000] Booting paravirtualized kernel on bare hardware
[   159.057] [    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[   159.057] [    0.000000] PERCPU: Embedded 13 pages/cpu @f71d1000 s31424 r0 d21824 u53248
[   159.057] [    0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
[   159.057] [    0.000000] pcpu-alloc: [0] 0 [0] 1 
[   159.057] [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1362542
[   159.057] [    0.000000] Policy zone: HighMem
[   159.057] [    0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 resume=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part5 splash=silent quiet vga=0x31a
[   159.057] [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[   159.057] [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   159.057] [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   159.057] [    0.000000] Initializing CPU#0
[   159.057] [    0.000000] allocated 13631360 bytes of page_cgroup
[   159.057] [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[   159.057] [    0.000000] Initializing HighMem for node 0 (000371fe:001a0000)
[   159.057] [    0.000000] Memory: 5344568k/6815744k available (5279k kernel code, 103556k reserved, 2553k data, 492k init, 4545416k highmem)
[   159.057] [    0.000000] virtual kernel memory layout:
[   159.057] [    0.000000]     fixmap  : 0xff5b4000 - 0xfffff000   (10540 kB)
[   159.057] [    0.000000]     pkmap   : 0xff200000 - 0xff400000   (2048 kB)
[   159.057] [    0.000000]     vmalloc : 0xf79fe000 - 0xff1fe000   ( 120 MB)
[   159.057] [    0.000000]     lowmem  : 0xc0000000 - 0xf71fe000   ( 881 MB)
[   159.057] [    0.000000]       .init : 0xc09a7000 - 0xc0a22000   ( 492 kB)
[   159.057] [    0.000000]       .data : 0xc0727e29 - 0xc09a6380   (2553 kB)
[   159.057] [    0.000000]       .text : 0xc0200000 - 0xc0727e29   (5279 kB)
[   159.057] [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[   159.057] [    0.000000] Preemptible hierarchical RCU implementation.
[   159.057] [    0.000000] NR_IRQS:8448 nr_irqs:512 16
[   159.057] [    0.000000] CPU 0 irqstacks, hard=f6c06000 soft=f6c08000
[   159.057] [    0.000000] Extended CMOS year: 2000
[   159.057] [    0.000000] spurious 8259A interrupt: IRQ7.
[   159.057] [    0.000000] Console: colour dummy device 80x25
[   159.057] [    0.000000] console [tty0] enabled
[   159.057] [    0.000000] Fast TSC calibration using PIT
[   159.057] [    0.000000] Detected 2611.805 MHz processor.
[   159.057] [    0.000000] Marking TSC unstable due to TSCs unsynchronized
[   159.057] [    0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.61 BogoMIPS (lpj=2611805)
[   159.057] [    0.002006] pid_max: default: 32768 minimum: 301
[   159.057] [    0.002041] Security Framework initialized
[   159.057] [    0.002054] AppArmor: AppArmor initialized
[   159.057] [    0.002096] Mount-cache hash table entries: 512
[   159.057] [    0.003069] Initializing cgroup subsys cpuacct
[   159.057] [    0.003071] Initializing cgroup subsys memory
[   159.057] [    0.003079] Initializing cgroup subsys devices
[   159.057] [    0.003081] Initializing cgroup subsys freezer
[   159.057] [    0.003083] Initializing cgroup subsys net_cls
[   159.057] [    0.003085] Initializing cgroup subsys blkio
[   159.057] [    0.003090] Initializing cgroup subsys perf_event
[   159.057] [    0.003113] CPU: Physical Processor ID: 0
[   159.057] [    0.003114] CPU: Processor Core ID: 0
[   159.057] [    0.003117] mce: CPU supports 5 MCE banks
[   159.057] [    0.003123] LVT offset 0 assigned for vector 0xf9
[   159.057] [    0.003126] using AMD E400 aware idle routine
[   159.057] [    0.003710] ACPI: Core revision 20120320
[   159.057] [    0.010085] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[   159.057] [    0.011267] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[   159.057] [    0.021286] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01
[   159.057] [    0.021998] Performance Events: AMD PMU driver.
[   159.057] [    0.021998] ... version:                0
[   159.057] [    0.021998] ... bit width:              48
[   159.057] [    0.021998] ... generic registers:      4
[   159.057] [    0.021998] ... value mask:             0000ffffffffffff
[   159.057] [    0.021998] ... max period:             00007fffffffffff
[   159.057] [    0.021998] ... fixed-purpose events:   0
[   159.057] [    0.021998] ... event mask:             000000000000000f
[   159.057] [    0.021998] System has AMD C1E enabled
[   159.057] [    0.021998] Switch to broadcast mode on CPU0
[   159.057] [    0.029166] NMI watchdog: enabled, takes one hw-pmu counter.
[   159.057] [    0.035048] CPU 1 irqstacks, hard=f6ccc000 soft=f6cce000
[   159.057] [    0.035052] Booting Node   0, Processors  #1 Ok.
[   159.057] [    0.002999] Initializing CPU#1
[   159.057] [    0.002999] Switch to broadcast mode on CPU1
[   159.057] [    0.106087] NMI watchdog: enabled, takes one hw-pmu counter.
[   159.057] [    0.106122] Brought up 2 CPUs
[   159.057] [    0.106125] Total of 2 processors activated (10446.79 BogoMIPS).
[   159.057] [    0.106618] devtmpfs: initialized
[   159.057] [    0.107028] PM: Registering ACPI NVS region [mem 0xafee0000-0xafee2fff] (12288 bytes)
[   159.057] [    0.107136] dummy: 
[   159.057] [    0.107175] RTC time: 22:34:04, date: 07/17/12
[   159.057] [    0.107219] NET: Registered protocol family 16
[   159.057] [    0.107365] node 0 link 0: io port [7000, ffff]
[   159.057] [    0.107369] TOM: 00000000c0000000 aka 3072M
[   159.057] [    0.107372] node 0 link 0: mmio [a0000, bffff]
[   159.057] [    0.107374] node 0 link 0: mmio [c0000000, efffffff]
[   159.057] [    0.107377] node 0 link 0: mmio [f4000000, fe02ffff]
[   159.057] [    0.107380] node 0 link 0: mmio [f0000000, f04fffff]
[   159.057] [    0.107382] TOM2: 00000001a0000000 aka 6656M
[   159.057] [    0.107384] bus: [00, 04] on node 0 link 0
[   159.057] [    0.107387] bus: 00 index 0 [io  0x0000-0xffff]
[   159.057] [    0.107389] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[   159.057] [    0.107391] bus: 00 index 2 [mem 0xc0000000-0xf3ffffff]
[   159.057] [    0.107393] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[   159.058] [    0.107395] bus: 00 index 4 [mem 0x1a0000000-0xfcffffffff]
[   159.058] [    0.107507] ACPI: bus type pci registered
[   159.058] [    0.107569] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[   159.058] [    0.107572] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[   159.058] [    0.107574] PCI: Using MMCONFIG for extended config space
[   159.058] [    0.107575] PCI: Using configuration type 1 for base access
[   159.058] [    0.108553] bio: create slab <bio-0> at 0
[   159.058] [    0.108553] ACPI: Added _OSI(Module Device)
[   159.058] [    0.108553] ACPI: Added _OSI(Processor Device)
[   159.058] [    0.108553] ACPI: Added _OSI(3.0 _SCP Extensions)
[   159.058] [    0.108553] ACPI: Added _OSI(Processor Aggregator Device)
[   159.058] [    0.110653] ACPI: EC: Look up EC in DSDT
[   159.058] [    0.117518] ACPI: Interpreter enabled
[   159.058] [    0.117528] ACPI: (supports S0 S1 S3 S4 S5)
[   159.058] [    0.117553] ACPI: Using IOAPIC for interrupt routing
[   159.058] [    0.124575] ACPI: No dock devices found.
[   159.058] [    0.124581] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[   159.058] [    0.125245] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[   159.058] [    0.126515] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
[   159.058] [    0.126517] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
[   159.058] [    0.126520] pci_root PNP0A08:00: host bridge window [io  0x1c00-0x1c7f]
[   159.058] [    0.126522] pci_root PNP0A08:00: host bridge window [io  0x7000-0xffff]
[   159.058] [    0.126524] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
[   159.058] [    0.126527] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[   159.058] [    0.126529] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff]
[   159.058] [    0.126531] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff]
[   159.058] [    0.126568] PCI host bridge to bus 0000:00
[   159.058] [    0.126571] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[   159.058] [    0.126573] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[   159.058] [    0.126576] pci_bus 0000:00: root bus resource [io  0x1c00-0x1c7f]
[   159.058] [    0.126578] pci_bus 0000:00: root bus resource [io  0x7000-0xffff]
[   159.058] [    0.126580] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[   159.058] [    0.126583] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[   159.058] [    0.126585] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
[   159.058] [    0.126588] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff]
[   159.058] [    0.126613] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[   159.058] [    0.126782] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[   159.058] [    0.126820] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[   159.058] [    0.126831] pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc3f]
[   159.058] [    0.126846] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
[   159.058] [    0.126852] pci 0000:00:01.1: reg 24: [io  0x1c40-0x1c7f]
[   159.058] [    0.126879] pci 0000:00:01.1: PME# supported from D3hot D3cold
[   159.058] [    0.126894] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[   159.058] [    0.126934] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[   159.058] [    0.126944] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[   159.058] [    0.126976] pci 0000:00:02.0: supports D1 D2
[   159.058] [    0.126978] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[   159.058] [    0.126994] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[   159.058] [    0.127004] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[   159.058] [    0.127043] pci 0000:00:02.1: supports D1 D2
[   159.058] [    0.127045] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[   159.058] [    0.127065] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[   159.058] [    0.127103] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[   159.058] [    0.127114] pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff]
[   159.058] [    0.127153] pci 0000:00:05.0: PME# supported from D3hot D3cold
[   159.058] [    0.127172] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[   159.058] [    0.127193] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[   159.058] [    0.127223] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[   159.058] [    0.127232] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[   159.058] [    0.127237] pci 0000:00:07.0: reg 14: [io  0xec00-0xec07]
[   159.058] [    0.127270] pci 0000:00:07.0: supports D1 D2
[   159.058] [    0.127272] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[   159.058] [    0.127287] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[   159.058] [    0.127296] pci 0000:00:08.0: reg 10: [io  0x09f0-0x09f7]
[   159.058] [    0.127300] pci 0000:00:08.0: reg 14: [io  0x0bf0-0x0bf3]
[   159.058] [    0.127305] pci 0000:00:08.0: reg 18: [io  0x0970-0x0977]
[   159.058] [    0.127309] pci 0000:00:08.0: reg 1c: [io  0x0b70-0x0b73]
[   159.058] [    0.127314] pci 0000:00:08.0: reg 20: [io  0xd800-0xd80f]
[   159.058] [    0.127318] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[   159.058] [    0.127345] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[   159.058] [    0.127353] pci 0000:00:08.1: reg 10: [io  0x09e0-0x09e7]
[   159.058] [    0.127357] pci 0000:00:08.1: reg 14: [io  0x0be0-0x0be3]
[   159.058] [    0.127362] pci 0000:00:08.1: reg 18: [io  0x0960-0x0967]
[   159.058] [    0.127366] pci 0000:00:08.1: reg 1c: [io  0x0b60-0x0b63]
[   159.058] [    0.127370] pci 0000:00:08.1: reg 20: [io  0xc400-0xc40f]
[   159.058] [    0.127375] pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff]
[   159.058] [    0.127407] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[   159.058] [    0.127433] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[   159.058] [    0.127447] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[   159.058] [    0.127472] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[   159.058] [    0.127485] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[   159.058] [    0.127509] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[   159.058] [    0.127520] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[   159.058] [    0.127527] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[   159.058] [    0.127533] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[   159.058] [    0.127538] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[   159.058] [    0.127545] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[   159.058] [    0.127571] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[   159.058] [    0.127589] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[   159.058] [    0.127604] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[   159.059] [    0.127618] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[   159.059] [    0.127668] pci 0000:01:06.0: [104c:8023] type 00 class 0x0c0010
[   159.059] [    0.127682] pci 0000:01:06.0: reg 10: [mem 0xfd8ff000-0xfd8ff7ff]
[   159.059] [    0.127690] pci 0000:01:06.0: reg 14: [mem 0xfd8f8000-0xfd8fbfff]
[   159.059] [    0.127739] pci 0000:01:06.0: supports D1 D2
[   159.059] [    0.127741] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
[   159.059] [    0.127756] pci 0000:01:07.0: [1043:0675] type 00 class 0x028000
[   159.059] [    0.127768] pci 0000:01:07.0: reg 10: [io  0xbc00-0xbc07]
[   159.059] [    0.127775] pci 0000:01:07.0: reg 14: [mem 0xfd8fe000-0xfd8fe0ff]
[   159.059] [    0.127818] pci 0000:01:07.0: supports D1 D2
[   159.059] [    0.127820] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot
[   159.059] [    0.127837] pci 0000:01:08.0: [109e:036e] type 00 class 0x040000
[   159.059] [    0.127851] pci 0000:01:08.0: reg 10: [mem 0xfdfff000-0xfdffffff pref]
[   159.059] [    0.127921] pci 0000:01:08.1: [109e:0878] type 00 class 0x048000
[   159.059] [    0.127934] pci 0000:01:08.1: reg 10: [mem 0xfdffe000-0xfdffefff pref]
[   159.059] [    0.128022] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[   159.059] [    0.128025] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[   159.059] [    0.128029] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[   159.059] [    0.128033] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[   159.059] [    0.128035] pci 0000:00:04.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
[   159.059] [    0.128038] pci 0000:00:04.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[   159.059] [    0.128040] pci 0000:00:04.0:   bridge window [io  0x1c00-0x1c7f] (subtractive decode)
[   159.059] [    0.128043] pci 0000:00:04.0:   bridge window [io  0x7000-0xffff] (subtractive decode)
[   159.059] [    0.128045] pci 0000:00:04.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[   159.059] [    0.128048] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[   159.059] [    0.128051] pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
[   159.059] [    0.128053] pci 0000:00:04.0:   bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode)
[   159.059] [    0.128075] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[   159.059] [    0.128078] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[   159.059] [    0.128081] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[   159.059] [    0.128085] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[   159.059] [    0.128119] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[   159.059] [    0.128178] pci 0000:03:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
[   159.059] [    0.128188] pci 0000:03:00.0: reg 30: [mem 0xfdce0000-0xfdceffff pref]
[   159.059] [    0.128223] pci 0000:03:00.0: PME# supported from D3hot
[   159.059] [    0.128247] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[   159.059] [    0.128264] pci 0000:03:00.1: reg 10: [io  0x9c00-0x9c07]
[   159.059] [    0.128274] pci 0000:03:00.1: reg 14: [io  0x9800-0x9803]
[   159.059] [    0.128284] pci 0000:03:00.1: reg 18: [io  0x9400-0x9407]
[   159.059] [    0.128294] pci 0000:03:00.1: reg 1c: [io  0x9000-0x9003]
[   159.059] [    0.128304] pci 0000:03:00.1: reg 20: [io  0x8c00-0x8c0f]
[   159.059] [    0.128360] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[   159.059] [    0.128371] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[   159.059] [    0.128374] pci 0000:00:0b.0:   bridge window [io  0x8000-0x9fff]
[   159.059] [    0.128377] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[   159.059] [    0.128381] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[   159.059] [    0.128401] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[   159.059] [    0.128404] pci 0000:00:0c.0:   bridge window [io  0x7000-0x7fff]
[   159.059] [    0.128407] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[   159.059] [    0.128411] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[   159.059] [    0.128421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   159.059] [    0.128584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   159.059] [    0.128753]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[   159.059] [    0.128757]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[   159.059] [    0.128759] ACPI _OSC control for PCIe not granted, disabling ASPM
[   159.059] [    0.157729] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
[   159.059] [    0.157787] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[   159.059] [    0.157844] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.157899] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.157953] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158015] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[   159.059] [    0.158069] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158124] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158181] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15)
[   159.059] [    0.158235] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158290] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158347] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[   159.059] [    0.158402] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[   159.059] [    0.158455] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158510] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158565] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158620] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   159.059] [    0.158679] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[   159.059] [    0.158735] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[   159.059] [    0.158826] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[   159.059] [    0.158915] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[   159.059] [    0.159004] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[   159.059] [    0.159091] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[   159.059] [    0.159177] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[   159.059] [    0.159263] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[   159.059] [    0.159348] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[   159.059] [    0.159434] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[   159.059] [    0.159521] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0
[   159.059] [    0.159607] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0, disabled.
[   159.059] [    0.159694] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
[   159.059] [    0.159780] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
[   159.059] [    0.159867] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
[   159.059] [    0.159953] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0, disabled.
[   159.059] [    0.160044] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0, disabled.
[   159.059] [    0.160132] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
[   159.059] [    0.160220] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
[   159.059] [    0.160307] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
[   159.059] [    0.160395] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0
[   159.060] [    0.160461] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[   159.060] [    0.160461] vgaarb: loaded
[   159.060] [    0.160461] vgaarb: bridge control possible 0000:00:0d.0
[   159.060] [    0.160461] SCSI subsystem initialized
[   159.060] [    0.160461] libata version 3.00 loaded.
[   159.060] [    0.160461] usbcore: registered new interface driver usbfs
[   159.060] [    0.160461] usbcore: registered new interface driver hub
[   159.060] [    0.160461] usbcore: registered new device driver usb
[   159.060] [    0.160461] PCI: Using ACPI for IRQ routing
[   159.060] [    0.161316] PCI: pci_cache_line_size set to 64 bytes
[   159.060] [    0.161397] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
[   159.060] [    0.161400] reserve RAM buffer: 00000000afee0000 - 00000000afffffff 
[   159.060] [    0.161508] NetLabel: Initializing
[   159.060] [    0.161509] NetLabel:  domain hash size = 128
[   159.060] [    0.161511] NetLabel:  protocols = UNLABELED CIPSOv4
[   159.060] [    0.161521] NetLabel:  unlabeled traffic allowed by default
[   159.060] [    0.164246] AppArmor: AppArmor Filesystem Enabled
[   159.060] [    0.164281] pnp: PnP ACPI init
[   159.060] [    0.164301] ACPI: bus type pnp registered
[   159.060] [    0.165055] pnp 00:00: [bus 00-04]
[   159.060] [    0.165058] pnp 00:00: [io  0x0cf8-0x0cff]
[   159.060] [    0.165063] pnp 00:00: [io  0x0000-0x03af window]
[   159.060] [    0.165065] pnp 00:00: [io  0x03e0-0x0cf7 window]
[   159.060] [    0.165067] pnp 00:00: [io  0x1c00-0x1c7f window]
[   159.060] [    0.165069] pnp 00:00: [io  0x7000-0xffff window]
[   159.060] [    0.165071] pnp 00:00: [io  0x03b0-0x03df window]
[   159.060] [    0.165074] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[   159.060] [    0.165077] pnp 00:00: [mem 0xc0000000-0xefffffff window]
[   159.060] [    0.165079] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
[   159.060] [    0.165169] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[   159.060] [    0.165193] pnp 00:01: [io  0x1000-0x107f]
[   159.060] [    0.165195] pnp 00:01: [io  0x1080-0x10ff]
[   159.060] [    0.165197] pnp 00:01: [io  0x1400-0x147f]
[   159.060] [    0.165199] pnp 00:01: [io  0x1480-0x14ff]
[   159.060] [    0.165201] pnp 00:01: [io  0x1800-0x187f]
[   159.060] [    0.165203] pnp 00:01: [io  0x1880-0x18ff]
[   159.060] [    0.165267] system 00:01: [io  0x1000-0x107f] has been reserved
[   159.060] [    0.165270] system 00:01: [io  0x1080-0x10ff] has been reserved
[   159.060] [    0.165272] system 00:01: [io  0x1400-0x147f] has been reserved
[   159.060] [    0.165275] system 00:01: [io  0x1480-0x14ff] has been reserved
[   159.060] [    0.165277] system 00:01: [io  0x1800-0x187f] has been reserved
[   159.060] [    0.165280] system 00:01: [io  0x1880-0x18ff] has been reserved
[   159.060] [    0.165283] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[   159.060] [    0.165378] pnp 00:02: [io  0x0010-0x001f]
[   159.060] [    0.165381] pnp 00:02: [io  0x0022-0x003f]
[   159.060] [    0.165383] pnp 00:02: [io  0x0044-0x005f]
[   159.060] [    0.165385] pnp 00:02: [io  0x0062-0x0063]
[   159.060] [    0.165387] pnp 00:02: [io  0x0065-0x006f]
[   159.060] [    0.165389] pnp 00:02: [io  0x0074-0x007f]
[   159.060] [    0.165391] pnp 00:02: [io  0x0091-0x0093]
[   159.060] [    0.165393] pnp 00:02: [io  0x00a2-0x00bf]
[   159.060] [    0.165395] pnp 00:02: [io  0x00e0-0x00ef]
[   159.060] [    0.165397] pnp 00:02: [io  0x0b78-0x0b7b]
[   159.060] [    0.165399] pnp 00:02: [io  0x0f78-0x0f7b]
[   159.060] [    0.165401] pnp 00:02: [io  0x0a78-0x0a7b]
[   159.060] [    0.165403] pnp 00:02: [io  0x0e78-0x0e7b]
[   159.060] [    0.165405] pnp 00:02: [io  0x0bbc-0x0bbf]
[   159.060] [    0.165407] pnp 00:02: [io  0x0fbc-0x0fbf]
[   159.060] [    0.165409] pnp 00:02: [io  0x04d0-0x04d1]
[   159.060] [    0.165411] pnp 00:02: [io  0x0294-0x0297]
[   159.060] [    0.165413] pnp 00:02: [io  0x0800-0x087f]
[   159.060] [    0.165415] pnp 00:02: [io  0x0290-0x0297]
[   159.060] [    0.165485] system 00:02: [io  0x0b78-0x0b7b] has been reserved
[   159.060] [    0.165488] system 00:02: [io  0x0f78-0x0f7b] has been reserved
[   159.060] [    0.165490] system 00:02: [io  0x0a78-0x0a7b] has been reserved
[   159.060] [    0.165493] system 00:02: [io  0x0e78-0x0e7b] has been reserved
[   159.060] [    0.165496] system 00:02: [io  0x0bbc-0x0bbf] has been reserved
[   159.060] [    0.165498] system 00:02: [io  0x0fbc-0x0fbf] has been reserved
[   159.060] [    0.165501] system 00:02: [io  0x04d0-0x04d1] has been reserved
[   159.060] [    0.165504] system 00:02: [io  0x0294-0x0297] has been reserved
[   159.060] [    0.165506] system 00:02: [io  0x0800-0x087f] has been reserved
[   159.060] [    0.165509] system 00:02: [io  0x0290-0x0297] could not be reserved
[   159.060] [    0.165512] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[   159.060] [    0.165526] pnp 00:03: [dma 4]
[   159.060] [    0.165528] pnp 00:03: [io  0x0000-0x000f]
[   159.060] [    0.165530] pnp 00:03: [io  0x0080-0x0090]
[   159.060] [    0.165532] pnp 00:03: [io  0x0094-0x009f]
[   159.060] [    0.165534] pnp 00:03: [io  0x00c0-0x00df]
[   159.060] [    0.165565] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[   159.060] [    0.165578] pnp 00:04: [io  0x0070-0x0073]
[   159.060] [    0.165592] pnp 00:04: [irq 8]
[   159.060] [    0.165626] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[   159.060] [    0.165637] pnp 00:05: [io  0x0061]
[   159.060] [    0.165669] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[   159.060] [    0.165679] pnp 00:06: [io  0x00f0-0x00ff]
[   159.060] [    0.165689] pnp 00:06: [irq 13]
[   159.060] [    0.165721] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[   159.060] [    0.165848] pnp 00:07: [io  0x03f0-0x03f5]
[   159.060] [    0.165851] pnp 00:07: [io  0x03f7]
[   159.060] [    0.165859] pnp 00:07: [irq 6]
[   159.060] [    0.165860] pnp 00:07: [dma 2]
[   159.060] [    0.165908] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[   159.060] [    0.166105] pnp 00:08: [io  0x03f8-0x03ff]
[   159.060] [    0.166114] pnp 00:08: [irq 4]
[   159.060] [    0.166175] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[   159.060] [    0.166460] pnp 00:09: [io  0x0378-0x037f]
[   159.061] [    0.166462] pnp 00:09: [io  0x0778-0x077b]
[   159.061] [    0.166470] pnp 00:09: [irq 7]
[   159.061] [    0.166527] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[   159.061] [    0.166641] pnp 00:0a: [irq 12]
[   159.061] [    0.166681] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[   159.061] [    0.166708] pnp 00:0b: [io  0x0060]
[   159.061] [    0.166710] pnp 00:0b: [io  0x0064]
[   159.061] [    0.166718] pnp 00:0b: [irq 1]
[   159.061] [    0.166764] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[   159.061] [    0.167474] pnp 00:0c: [mem 0xf0000000-0xf3ffffff]
[   159.061] [    0.167542] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[   159.061] [    0.167545] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[   159.061] [    0.167722] pnp 00:0d: [mem 0x000d2800-0x000d3fff]
[   159.061] [    0.167725] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[   159.061] [    0.167727] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[   159.061] [    0.167729] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[   159.061] [    0.167731] pnp 00:0d: [mem 0xafee0000-0xafefffff]
[   159.061] [    0.167733] pnp 00:0d: [mem 0xffff0000-0xffffffff]
[   159.061] [    0.167735] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[   159.061] [    0.167738] pnp 00:0d: [mem 0x00100000-0xafedffff]
[   159.061] [    0.167740] pnp 00:0d: [mem 0xafff0000-0xbffeffff]
[   159.061] [    0.167742] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[   159.061] [    0.167744] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[   159.061] [    0.167747] pnp 00:0d: [mem 0xfefff000-0xfeffffff]
[   159.061] [    0.167749] pnp 00:0d: [mem 0xfff80000-0xfff80fff]
[   159.061] [    0.167751] pnp 00:0d: [mem 0xfff90000-0xfffbffff]
[   159.061] [    0.167753] pnp 00:0d: [mem 0xfffed000-0xfffeffff]
[   159.061] [    0.167831] system 00:0d: [mem 0x000d2800-0x000d3fff] has been reserved
[   159.061] [    0.167834] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[   159.061] [    0.167837] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[   159.061] [    0.167839] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[   159.061] [    0.167842] system 00:0d: [mem 0xafee0000-0xafefffff] could not be reserved
[   159.061] [    0.167845] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[   159.061] [    0.167848] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[   159.061] [    0.167850] system 00:0d: [mem 0x00100000-0xafedffff] could not be reserved
[   159.061] [    0.167853] system 00:0d: [mem 0xafff0000-0xbffeffff] could not be reserved
[   159.061] [    0.167856] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[   159.061] [    0.167859] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[   159.061] [    0.167861] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[   159.061] [    0.167864] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[   159.061] [    0.167867] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[   159.061] [    0.167871] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[   159.061] [    0.167874] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[   159.061] [    0.167885] pnp: PnP ACPI: found 14 devices
[   159.061] [    0.167886] ACPI: ACPI bus type pnp unregistered
[   159.061] [    0.204409] Switching to clocksource acpi_pm
[   159.061] [    0.204978] pci 0000:00:0d.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[   159.061] [    0.204978] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[   159.061] [    0.204978] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[   159.061] [    0.204978] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[   159.061] [    0.204978] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[   159.061] [    0.204978] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[   159.061] [    0.204978] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[   159.061] [    0.204978] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[   159.061] [    0.204978] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[   159.061] [    0.204978] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[   159.061] [    0.204978] pci 0000:00:0b.0:   bridge window [io  0x8000-0x9fff]
[   159.061] [    0.204978] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[   159.061] [    0.204978] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[   159.061] [    0.204978] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[   159.061] [    0.204978] pci 0000:00:0c.0:   bridge window [io  0x7000-0x7fff]
[   159.061] [    0.204978] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[   159.061] [    0.204978] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[   159.061] [    0.204978] pci 0000:00:04.0: setting latency timer to 64
[   159.061] [    0.204978] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[   159.061] [    0.204978] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[   159.061] [    0.204978] pci_bus 0000:00: resource 6 [io  0x1c00-0x1c7f]
[   159.061] [    0.204978] pci_bus 0000:00: resource 7 [io  0x7000-0xffff]
[   159.061] [    0.204978] pci_bus 0000:00: resource 8 [io  0x03b0-0x03df]
[   159.061] [    0.204978] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
[   159.061] [    0.204978] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xefffffff]
[   159.061] [    0.204978] pci_bus 0000:00: resource 11 [mem 0xf4000000-0xfe02ffff]
[   159.061] [    0.204978] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[   159.061] [    0.204978] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[   159.061] [    0.204978] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[   159.061] [    0.204978] pci_bus 0000:01: resource 4 [io  0x0000-0x03af]
[   159.061] [    0.204978] pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7]
[   159.061] [    0.204978] pci_bus 0000:01: resource 6 [io  0x1c00-0x1c7f]
[   159.061] [    0.204978] pci_bus 0000:01: resource 7 [io  0x7000-0xffff]
[   159.061] [    0.204978] pci_bus 0000:01: resource 8 [io  0x03b0-0x03df]
[   159.061] [    0.204978] pci_bus 0000:01: resource 9 [mem 0x000a0000-0x000bffff]
[   159.061] [    0.204978] pci_bus 0000:01: resource 10 [mem 0xc0000000-0xefffffff]
[   159.061] [    0.204978] pci_bus 0000:01: resource 11 [mem 0xf4000000-0xfe02ffff]
[   159.061] [    0.204978] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[   159.061] [    0.204978] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[   159.061] [    0.204978] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[   159.061] [    0.204978] pci_bus 0000:03: resource 0 [io  0x8000-0x9fff]
[   159.061] [    0.204978] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[   159.061] [    0.204978] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[   159.061] [    0.204978] pci_bus 0000:04: resource 0 [io  0x7000-0x7fff]
[   159.061] [    0.204978] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[   159.061] [    0.204978] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[   159.062] [    0.204978] NET: Registered protocol family 2
[   159.062] [    0.204978] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   159.062] [    0.204978] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   159.062] [    0.206200] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   159.062] [    0.206517] TCP: Hash tables configured (established 131072 bind 65536)
[   159.062] [    0.206519] TCP: reno registered
[   159.062] [    0.206523] UDP hash table entries: 512 (order: 2, 16384 bytes)
[   159.062] [    0.206535] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[   159.062] [    0.206653] NET: Registered protocol family 1
[   159.062] [    0.206928] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   159.062] [    0.270751] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[   159.062] [    0.270811] pci 0000:00:00.0: Found enabled HT MSI Mapping
[   159.062] [    0.270856] pci 0000:00:00.0: Found enabled HT MSI Mapping
[   159.062] [    0.270912] pci 0000:00:00.0: Found enabled HT MSI Mapping
[   159.062] [    0.270964] pci 0000:00:00.0: Found enabled HT MSI Mapping
[   159.062] [    0.271033] pci 0000:00:00.0: Found enabled HT MSI Mapping
[   159.062] [    0.271089] pci 0000:00:00.0: Found enabled HT MSI Mapping
[   159.062] [    0.271150] pci 0000:00:00.0: Found enabled HT MSI Mapping
[   159.062] [    0.271213] pci 0000:00:00.0: Found enabled HT MSI Mapping
[   159.062] [    0.271219] pci 0000:00:0d.0: Boot video device
[   159.062] [    0.271242] PCI: CLS 32 bytes, default 64
[   159.062] [    0.271299] Unpacking initramfs...
[   159.062] [    0.786321] Freeing initrd memory: 24568k freed
[   159.062] [    0.800377] audit: initializing netlink socket (disabled)
[   159.062] [    0.800393] type=2000 audit(1342564444.799:1): initialized
[   159.062] [    0.820261] highmem bounce pool size: 64 pages
[   159.062] [    0.820266] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   159.062] [    0.821151] VFS: Disk quotas dquot_6.5.2
[   159.062] [    0.821179] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   159.062] [    0.821428] msgmni has been set to 1608
[   159.062] [    0.821755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   159.062] [    0.821800] io scheduler noop registered
[   159.062] [    0.821802] io scheduler deadline registered
[   159.062] [    0.821824] io scheduler cfq registered (default)
[   159.062] [    0.822035] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[   159.062] [    0.822142] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[   159.062] [    0.822238] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[   159.062] [    0.822367] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[   159.062] [    0.822369] vesafb: protected mode interface info at c000:d030
[   159.062] [    0.822372] vesafb: pmi: set display start = c00cd066, set palette = c00cd0d0
[   159.062] [    0.822373] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[   159.062] [    0.822386] vesafb: scrolling: redraw
[   159.062] [    0.822388] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   159.062] [    0.822950] vesafb: framebuffer at 0xe0000000, mapped to 0xf7a80000, using 5120k, total 262144k
[   159.062] [    0.834410] Console: switching to colour frame buffer device 160x64
[   159.062] [    0.845754] fb0: VESA VGA frame buffer device
[   159.062] [    0.845820] GHES: HEST is not enabled!
[   159.062] [    0.845887] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[   159.062] [    0.866365] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   159.062] [    0.887426] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   159.062] [    0.887692] Non-volatile memory driver v1.3
[   159.062] [    0.887694] Linux agpgart interface v0.103
[   159.062] [    0.889463] ahci 0000:03:00.0: version 3.0
[   159.062] [    0.889672] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[   159.062] [    0.900708] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[   159.062] [    0.900714] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[   159.062] [    0.901152] scsi0 : ahci
[   159.062] [    0.901265] scsi1 : ahci
[   159.062] [    0.901308] ata1: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 16
[   159.062] [    0.901311] ata2: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 16
[   159.062] [    0.901444] Fixed MDIO Bus: probed
[   159.062] [    0.901447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   159.062] [    0.901538] ehci_hcd 0000:00:02.1: setting latency timer to 64
[   159.062] [    0.901540] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   159.062] [    0.901569] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   159.062] [    0.901595] ehci_hcd 0000:00:02.1: debug port 1
[   159.062] [    0.901603] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[   159.062] [    0.901621] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[   159.062] [    0.907671] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[   159.062] [    0.907705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   159.062] [    0.907708] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   159.062] [    0.907711] usb usb1: Product: EHCI Host Controller
[   159.062] [    0.907713] usb usb1: Manufacturer: Linux 3.4.5-0.1-desktop ehci_hcd
[   159.062] [    0.907715] usb usb1: SerialNumber: 0000:00:02.1
[   159.062] [    0.907852] hub 1-0:1.0: USB hub found
[   159.062] [    0.907858] hub 1-0:1.0: 10 ports detected
[   159.062] [    0.907967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   159.062] [    0.908085] ohci_hcd 0000:00:02.0: setting latency timer to 64
[   159.062] [    0.908088] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   159.062] [    0.908100] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[   159.062] [    0.908131] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[   159.062] [    0.961716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   159.062] [    0.961721] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   159.062] [    0.961723] usb usb2: Product: OHCI Host Controller
[   159.062] [    0.961725] usb usb2: Manufacturer: Linux 3.4.5-0.1-desktop ohci_hcd
[   159.062] [    0.961727] usb usb2: SerialNumber: 0000:00:02.0
[   159.062] [    0.961857] hub 2-0:1.0: USB hub found
[   159.062] [    0.961863] hub 2-0:1.0: 10 ports detected
[   159.062] [    0.961962] uhci_hcd: USB Universal Host Controller Interface driver
[   159.062] [    0.961991] Initializing USB Mass Storage driver...
[   159.062] [    0.962030] usbcore: registered new interface driver usb-storage
[   159.062] [    0.962032] USB Mass Storage support registered.
[   159.062] [    0.962042] usbcore: registered new interface driver ums-alauda
[   159.062] [    0.962050] usbcore: registered new interface driver ums-cypress
[   159.063] [    0.962059] usbcore: registered new interface driver ums-datafab
[   159.063] [    0.962068] usbcore: registered new interface driver ums-freecom
[   159.063] [    0.962076] usbcore: registered new interface driver ums-isd200
[   159.063] [    0.962087] usbcore: registered new interface driver ums-jumpshot
[   159.063] [    0.962096] usbcore: registered new interface driver ums-karma
[   159.063] [    0.962104] usbcore: registered new interface driver ums-onetouch
[   159.063] [    0.962113] usbcore: registered new interface driver ums-sddr09
[   159.063] [    0.962128] usbcore: registered new interface driver ums-sddr55
[   159.063] [    0.962136] usbcore: registered new interface driver ums-usbat
[   159.063] [    0.962184] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   159.063] [    0.965554] serio: i8042 KBD port at 0x60,0x64 irq 1
[   159.063] [    0.965585] serio: i8042 AUX port at 0x60,0x64 irq 12
[   159.063] [    0.965727] mousedev: PS/2 mouse device common for all mice
[   159.063] [    0.965888] rtc_cmos 00:04: RTC can wake from S4
[   159.063] [    0.966107] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[   159.063] [    0.966145] rtc0: alarms up to one year, y3k, 242 bytes nvram
[   159.063] [    0.966159] cpuidle: using governor ladder
[   159.063] [    0.966160] cpuidle: using governor menu
[   159.063] [    0.966395] usbcore: registered new interface driver usbhid
[   159.063] [    0.966397] usbhid: USB HID core driver
[   159.063] [    0.966545] TCP: cubic registered
[   159.063] [    0.966599] NET: Registered protocol family 10
[   159.063] [    0.966794] lib80211: common routines for IEEE802.11 drivers
[   159.063] [    0.966796] lib80211_crypt: registered algorithm 'NULL'
[   159.063] [    0.966798] Registering the dns_resolver key type
[   159.063] [    0.966815] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[   159.063] [    0.966850] Using IPI No-Shortcut mode
[   159.063] [    0.966993] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part5
[   159.063] [    0.987789] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[   159.063] [    1.206697] ata1: SATA link down (SStatus 0 SControl 300)
[   159.063] [    1.210308] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[   159.063] [    1.211202] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 102
[   159.063] [    1.332800] usb 1-1: New USB device found, idVendor=0c45, idProduct=62b3
[   159.063] [    1.332803] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   159.063] [    1.332805] usb 1-1: Product: USB20 Camera    
[   159.063] [    1.361595] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   159.063] [    1.363569] ata2.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133
[   159.063] [    1.363572] ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   159.063] [    1.366407] ata2.00: configured for UDMA/133
[   159.063] [    1.366604] scsi 1:0:0:0: Direct-Access     ATA      WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5
[   159.063] [    1.366742] sd 1:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[   159.063] [    1.366826] sd 1:0:0:0: [sda] Write Protect is off
[   159.063] [    1.366828] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   159.063] [    1.366879] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   159.063] [    1.394167]  sda: sda1 < sda5 sda6 > sda2 sda3 sda4
[   159.063] [    1.394848] sd 1:0:0:0: [sda] Attached SCSI disk
[   159.063] [    1.537587] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[   159.063] [    1.663802] usb 1-5: New USB device found, idVendor=0bda, idProduct=8187
[   159.063] [    1.663805] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   159.063] [    1.663807] usb 1-5: Product: RTL8187_Wireless
[   159.063] [    1.663809] usb 1-5: Manufacturer: Manufacturer_Realtek_RTL8187_
[   159.063] [    1.663811] usb 1-5: SerialNumber: 0015AF08A9E5
[   159.063] [    1.768689] usb 1-8: new high-speed USB device number 5 using ehci_hcd
[   159.063] [    1.936160] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[   159.063] [    1.939466] PM: Hibernation image not present or could not be loaded.
[   159.063] [    1.939484] registered taskstats version 1
[   159.063] [    1.940144]   Magic number: 4:647:603
[   159.063] [    1.940195] pci_link PNP0C0F:0f: hash matches
[   159.063] [    1.940257] rtc_cmos 00:04: setting system clock to 2012-07-17 22:34:06 UTC (1342564446)
[   159.063] [    1.940481] Freeing unused kernel memory: 492k freed
[   159.063] [    1.940769] Write protecting the kernel text: 5280k
[   159.063] [    1.940817] Write protecting the kernel read-only data: 2176k
[   159.063] [    1.940819] NX-protecting the kernel data: 4960k
[   159.063] [    1.977922] sata_nv 0000:00:08.0: version 3.5
[   159.063] [    1.978170] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   159.063] [    1.978225] sata_nv 0000:00:08.0: setting latency timer to 64
[   159.063] [    1.978449] scsi2 : sata_nv
[   159.063] [    1.978519] scsi3 : sata_nv
[   159.063] [    1.978642] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
[   159.063] [    1.978645] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
[   159.063] [    1.980630] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
[   159.063] [    1.980695] sata_nv 0000:00:08.1: setting latency timer to 64
[   159.063] [    1.980932] scsi4 : sata_nv
[   159.063] [    1.981014] scsi5 : sata_nv
[   159.063] [    1.981140] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21
[   159.063] [    1.981143] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21
[   159.063] [    2.010428] usb 1-8: New USB device found, idVendor=058f, idProduct=6387
[   159.063] [    2.010432] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   159.063] [    2.010435] usb 1-8: Product: Rainbow Line
[   159.063] [    2.010437] usb 1-8: Manufacturer: Intenso
[   159.063] [    2.010439] usb 1-8: SerialNumber: A0148F53
[   159.063] [    2.011527] scsi6 : usb-storage 1-8:1.0
[   159.063] [    2.113588] usb 1-10: new high-speed USB device number 6 using ehci_hcd
[   159.063] [    2.291882] ata3: SATA link down (SStatus 0 SControl 300)
[   159.063] [    2.435707] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   159.063] [    2.438796] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max UDMA/100
[   159.063] [    2.444783] ata5.00: configured for UDMA/100
[   159.063] [    2.604973] ata4: SATA link down (SStatus 0 SControl 300)
[   159.063] [    2.610367] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H66N  CB00 PQ: 0 ANSI: 5
[   159.063] [    2.810298] usb 1-10: New USB device found, idVendor=0bda, idProduct=0151
[   159.063] [    2.810301] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   159.063] [    2.810303] usb 1-10: Product: USB2.0-CRW
[   159.063] [    2.810305] usb 1-10: Manufacturer: Generic
[   159.064] [    2.810307] usb 1-10: SerialNumber: 20060413092100000
[   159.064] [    2.813627] scsi7 : usb-storage 1-10:1.0
[   159.064] [    2.923871] ata6: SATA link down (SStatus 0 SControl 300)
[   159.064] [    2.926151] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[   159.064] [    2.926345] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[   159.064] [    2.926384] pata_jmicron 0000:03:00.1: setting latency timer to 64
[   159.064] [    2.926662] scsi8 : pata_jmicron
[   159.064] [    2.926734] scsi9 : pata_jmicron
[   159.064] [    2.926773] ata7: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16
[   159.064] [    2.926775] ata8: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16
[   159.064] [    3.015663] scsi 6:0:0:0: Direct-Access     Intenso  Rainbow Line     8.07 PQ: 0 ANSI: 2
[   159.064] [    3.020193] sd 6:0:0:0: [sdb] 16433152 512-byte logical blocks: (8.41 GB/7.83 GiB)
[   159.064] [    3.021684] sd 6:0:0:0: [sdb] Write Protect is off
[   159.064] [    3.021689] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   159.064] [    3.023183] sd 6:0:0:0: [sdb] No Caching mode page present
[   159.064] [    3.023266] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   159.064] [    3.032935] sd 6:0:0:0: [sdb] No Caching mode page present
[   159.064] [    3.033040] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   159.064] [    3.075590] usb 2-2: new full-speed USB device number 2 using ohci_hcd
[   159.064] [    3.289238] usb 2-2: New USB device found, idVendor=03f0, idProduct=3104
[   159.064] [    3.289241] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   159.064] [    3.289243] usb 2-2: Product: DeskJet 960C
[   159.064] [    3.289245] usb 2-2: Manufacturer: Hewlett-Packard
[   159.064] [    3.289247] usb 2-2: SerialNumber: HU1BU1S14HRO
[   159.064] [    3.663588]  sdb: sdb1
[   159.064] [    3.670455] sd 6:0:0:0: [sdb] No Caching mode page present
[   159.064] [    3.670535] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   159.064] [    3.670614] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   159.064] [    3.674587] pata_amd 0000:00:06.0: version 0.4.1
[   159.064] [    3.674635] pata_amd 0000:00:06.0: setting latency timer to 64
[   159.064] [    3.674948] scsi10 : pata_amd
[   159.064] [    3.675059] scsi11 : pata_amd
[   159.064] [    3.675506] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   159.064] [    3.675508] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   159.064] [    3.824427] scsi 7:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[   159.064] [    3.834517] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   159.064] [    3.837464] scsi 7:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[   159.064] [    3.837625] ata10: port disabled--ignoring
[   159.064] [    3.845736] scsi 7:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[   159.064] [    3.856710] scsi 7:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[   159.064] [    3.859226] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[   159.064] [    3.865193] sd 7:0:0:2: [sde] Attached SCSI removable disk
[   159.064] [    3.868919] sd 7:0:0:3: [sdf] Attached SCSI removable disk
[   159.064] [    3.877578] udevd[141]: starting version 173
[   159.064] [    3.943801] ACPI: Fan [FAN] (on)
[   159.064] [    3.949472] ACPI: processor limited to max C-state 1
[   159.064] [    3.953394] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   159.064] [    3.954249] ACPI: Power Button [PWRB]
[   159.064] [    3.954345] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   159.064] [    3.955082] ACPI: Power Button [PWRF]
[   159.064] [    3.958521] thermal LNXTHERM:00: registered as thermal_zone0
[   159.064] [    3.958525] ACPI: Thermal Zone [THRM] (40 C)
[   159.064] [    4.027763] wmi: Mapper loaded
[   159.064] [    4.060732] [drm] Initialized drm 1.1.0 20060810
[   159.064] [    4.108440] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[   159.064] [    4.108962] nouveau 0000:00:0d.0: setting latency timer to 64
[   159.064] [    4.108986] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
[   159.064] [    4.109923] checking generic (e0000000 10000000) vs hw (e0000000 10000000)
[   159.064] [    4.109926] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   159.064] [    4.109950] Console: switching to colour dummy device 80x25
[   159.064] [    4.112260] [drm] nouveau 0000:00:0d.0: Checking PRAMIN for VBIOS
[   159.064] [    4.149613] [drm] nouveau 0000:00:0d.0: ... appears to be valid
[   159.064] [    4.149615] [drm] nouveau 0000:00:0d.0: Using VBIOS from PRAMIN
[   159.064] [    4.149618] [drm] nouveau 0000:00:0d.0: BIT BIOS found
[   159.064] [    4.149621] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.14
[   159.064] [    4.149624] [drm] nouveau 0000:00:0d.0: TMDS table version 1.1
[   159.064] [    4.149626] [drm] nouveau 0000:00:0d.0: TMDS table script pointers not stubbed
[   159.064] [    4.149711] [drm] nouveau 0000:00:0d.0: MXM: no VBIOS data, nothing to do
[   159.064] [    4.149713] [drm] nouveau 0000:00:0d.0: DCB version 3.0
[   159.064] [    4.149716] [drm] nouveau 0000:00:0d.0: DCB outp 00: 01000310 00000023
[   159.064] [    4.149719] [drm] nouveau 0000:00:0d.0: DCB outp 01: 00110204 974f0000
[   159.064] [    4.149721] [drm] nouveau 0000:00:0d.0: DCB conn 00: 0000
[   159.064] [    4.149727] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDA6D
[   159.064] [    4.149730] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[   159.064] [    4.149737] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[   159.064] [    4.149788] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDBC4
[   159.064] [    4.149790] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDBC5
[   159.064] [    4.149841] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDD47
[   159.064] [    4.149845] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDD90
[   159.064] [    4.149967] [TTM] Zone  kernel: Available graphics memory: 412106 kiB
[   159.064] [    4.149969] [TTM] Zone highmem: Available graphics memory: 2684814 kiB
[   159.064] [    4.149971] [TTM] Initializing pool allocator
[   159.064] [    4.149983] [drm] nouveau 0000:00:0d.0: Detected 256MiB VRAM (unknown type)
[   159.064] [    4.150636] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[   159.064] [    4.154524] [drm] nouveau 0000:00:0d.0: DCB type 4 not known
[   159.064] [    4.154527] [drm] nouveau 0000:00:0d.0: Unknown-1 has no encoders, removing
[   159.064] [    4.155278] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   159.064] [    4.155280] [drm] No driver support for vblank timestamp query.
[   159.064] [    4.160603] [drm] nouveau 0000:00:0d.0: 1 available performance level(s)
[   159.064] [    4.160607] [drm] nouveau 0000:00:0d.0: 0: core 425MHz shader 425MHz fanspeed 100%
[   159.064] [    4.160609] [drm] nouveau 0000:00:0d.0: c:
[   159.064] [    4.161287] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
[   159.064] [    4.211162] [drm] nouveau 0000:00:0d.0: allocated 1680x1050 fb: 0x49000, bo f0702400
[   159.064] [    4.211242] fbcon: nouveaufb (fb0) is primary device
[   159.064] [    4.273135] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[   159.065] [    4.273140] [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
[   159.065] [    4.273151] Console: switching to colour frame buffer device 210x65
[   159.065] [    4.275200] fb0: nouveaufb frame buffer device
[   159.065] [    4.275202] drm: registered panic notifier
[   159.065] [    4.275207] [drm] Initialized nouveau 1.0.0 20120316 for 0000:00:0d.0 on minor 0
[   159.065] [    4.742606] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[   159.065] [    4.742612] PM: Basic memory bitmaps created
[   159.065] [    4.780082] PM: Basic memory bitmaps freed
[   159.065] [    4.801436] PM: Starting manual resume from disk
[   159.065] [    4.801441] PM: Hibernation image partition 8:5 present
[   159.065] [    4.801443] PM: Looking for hibernation image.
[   159.065] [    4.802192] PM: Image not found (code -22)
[   159.065] [    4.802194] PM: Hibernation image not present or could not be loaded.
[   159.065] [    5.526805] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   159.065] [    5.654248] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr
[   159.065] [    6.203741] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[   159.065] [    6.401779] systemd[1]: Set hostname to <Athlon64X2-5000.site>.
[   159.065] [    7.590432] systemd-readahead-replay[465]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[   159.065] [    7.959991] udevd[489]: starting version 173
[   159.065] [    8.423948] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr
[   159.065] [    8.495744] boot.localnet[499]: Using boot-specified hostname 'Athlon64X2-5000.site'
[   159.065] [    8.826300] boot.localnet[499]: Setting up hostname 'Athlon64X2-5000'..done
[   159.065] [    9.025871] boot.localnet[499]: Setting up loopback interface RTNETLINK answers: File exists
[   159.065] [    9.027427] boot.localnet[499]: ..done
[   159.065] [   10.457655] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[   159.065] [   10.920486] microcode: AMD CPU family 0xf not supported
[   159.065] [   10.973066] Floppy drive(s): fd0 is 1.44M
[   159.065] [   10.988800] FDC 0 is a post-1991 82077
[   159.065] [   11.075670] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   159.065] [   11.469309] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   159.065] [   11.469523] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   159.065] [   11.469530] forcedeth 0000:00:07.0: setting latency timer to 64
[   159.065] [   11.785312] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   159.065] [   11.822881] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   159.065] [   11.823571] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[   159.065] [   11.823646] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   159.065] [   11.823699] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   159.065] [   11.823848] sd 7:0:0:1: Attached scsi generic sg4 type 0
[   159.065] [   11.823898] sd 7:0:0:2: Attached scsi generic sg5 type 0
[   159.065] [   11.823953] sd 7:0:0:3: Attached scsi generic sg6 type 0
[   159.065] [   11.930307] ppdev: user-space parallel port driver
[   159.065] [   11.968877] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   159.065] [   11.992130] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:18:f3:a7:44:77
[   159.065] [   11.992135] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[   159.065] [   11.993632] ACPI Warning: 0x00001c00-0x00001c3f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20120320/utaddress-251)
[   159.065] [   11.993640] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   159.065] [   11.993740] i2c i2c-3: nForce2 SMBus adapter at 0x1c40
[   159.065] [   12.038415] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   159.065] [   12.089681] firewire_ohci 0000:01:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[   159.065] [   12.139702] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   159.065] [   12.139707] cdrom: Uniform CD-ROM driver Revision: 3.20
[   159.065] [   12.139959] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   159.065] [   12.255862] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[   159.065] [   12.255871] hda_intel: Disabling MSI
[   159.065] [   12.255909] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   159.065] [   12.264753] ALSA sound/pci/hda/hda_intel.c:1540 Enable delay in RIRB handling
[   159.065] [   12.295493] cfg80211: Calling CRDA to update world regulatory domain
[   159.065] [   12.311867] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00)
[   159.065] [   12.311922] powernow-k8: fid 0x12 (2600 MHz), vid 0x9
[   159.065] [   12.311924] powernow-k8: fid 0x10 (2400 MHz), vid 0xb
[   159.065] [   12.311926] powernow-k8: fid 0xe (2200 MHz), vid 0xd
[   159.065] [   12.311927] powernow-k8: fid 0xc (2000 MHz), vid 0xf
[   159.065] [   12.311929] powernow-k8: fid 0xa (1800 MHz), vid 0x11
[   159.065] [   12.311931] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[   159.065] [   12.370593] Linux video capture interface: v2.00
[   159.065] [   12.494680] WARNING! power/level is deprecated; use power/control instead
[   159.065] [   12.590353] firewire_core 0000:01:06.0: created device fw0: GUID 0011d80000f3d0c3, S400
[   159.065] [   13.073656] gspca_main: v2.14.0 registered
[   159.065] [   13.075386] ifup[806]: Service network not started and mode 'auto' -> skipping
[   159.065] [   13.274859] gspca_main: gspca_sn9c20x-2.14.0 probing 0c45:62b3
[   159.065] [   13.335621] bttv: driver version 0.9.19 loaded
[   159.065] [   13.335632] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   159.065] [   13.336332] bttv: Bt8xx card found (0)
[   159.065] [   13.336824] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[   159.065] [   13.336875] bttv: 0: Bt878 (rev 17) at 0000:01:08.0, irq: 18, latency: 32, mmio: 0xfdfff000
[   159.065] [   13.336926] bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[   159.065] [   13.336933] bttv: 0: using: Hauppauge (bt878) [card=10,autodetected]
[   159.065] [   13.339548] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5]
[   159.065] [   13.371481] tveeprom 4-0050: Hauppauge model 37284, rev B421, serial# 5111944
[   159.065] [   13.371488] tveeprom 4-0050: tuner model is Philips FM1216 (idx 21, type 5)
[   159.065] [   13.371495] tveeprom 4-0050: TV standards PAL(B/G) (eeprom 0x04)
[   159.065] [   13.371501] tveeprom 4-0050: audio processor is MSP3410D (idx 5)
[   159.065] [   13.371506] tveeprom 4-0050: has radio
[   159.065] [   13.371511] bttv: 0: Hauppauge eeprom indicates model#37284
[   159.065] [   13.371516] bttv: 0: tuner type=5
[   159.065] [   13.423546] hda_codec: AD1988: BIOS auto-probing.
[   159.065] [   13.423571] ALSA sound/pci/hda/hda_codec.c:5101 autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[   159.065] [   13.423579] ALSA sound/pci/hda/hda_codec.c:5105    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   159.065] [   13.423586] ALSA sound/pci/hda/hda_codec.c:5109    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   159.065] [   13.423592] ALSA sound/pci/hda/hda_codec.c:5110    mono: mono_out=0x0
[   159.065] [   13.423598] ALSA sound/pci/hda/hda_codec.c:5113    dig-out=0x1b/0x0
[   159.065] [   13.423603] ALSA sound/pci/hda/hda_codec.c:5114    inputs:
[   159.066] [   13.423609] ALSA sound/pci/hda/hda_codec.c:5118  Front Mic=0x14
[   159.066] [   13.423615] ALSA sound/pci/hda/hda_codec.c:5118  Rear Mic=0x17
[   159.066] [   13.423621] ALSA sound/pci/hda/hda_codec.c:5118  Line=0x15
[   159.066] [   13.423626] ALSA sound/pci/hda/hda_codec.c:5118  CD=0x18
[   159.066] [   13.423631] ALSA sound/pci/hda/hda_codec.c:5120 
[   159.066] [   13.470565] cfg80211: World regulatory domain updated:
[   159.066] [   13.470576] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   159.066] [   13.470583] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   159.066] [   13.470590] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   159.066] [   13.470596] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   159.066] [   13.470602] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   159.066] [   13.470608] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   159.066] [   13.543415] i2c-core: driver [msp3400] using legacy suspend method
[   159.066] [   13.543425] i2c-core: driver [msp3400] using legacy resume method
[   159.066] [   13.557640] msp3400 4-0040: MSP3410D-C5 found @ 0x80 (bt878 #0 [sw])
[   159.066] [   13.557646] msp3400 4-0040: msp3400 supports nicam, mode is autodetect
[   159.066] [   13.600315] gspca_sn9c20x: OV9655 sensor detected
[   159.066] [   13.600481] input: gspca_sn9c20x as /devices/pci0000:00/0000:00:02.1/usb1/1-1/input/input5
[   159.066] [   13.602160] usbcore: registered new interface driver gspca_sn9c20x
[   159.066] [   13.628433] i2c-core: driver [tuner] using legacy suspend method
[   159.066] [   13.628442] i2c-core: driver [tuner] using legacy resume method
[   159.066] [   13.989350] udev-configure-printer[862]: add /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0
[   159.066] [   13.990101] udev-configure-printer[862]: device devpath is /devices/pci0000:00/0000:00:02.0/usb2/2-2
[   159.066] [   13.990307] udev-configure-printer[862]: Device vendor/product is 03F0:3104
[   159.066] [   14.001734] udev-configure-printer[862]: MFG:HEWLETT-PACKARD MDL:DESKJET 960C SERN:HU1BU1S14HRO serial:HU1BU1S14HRO
[   159.066] [   14.087166] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.066] [   14.088147] ALSA sound/usb/mixer.c:846 2:1: cannot get min/max values for control 2 (id 2)
[   159.066] [   14.088647] usbcore: registered new interface driver snd-usb-audio
[   159.066] [   14.306844] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3104
[   159.066] [   14.307039] usbcore: registered new interface driver usblp
[   159.066] [   14.317963] udev-configure-printer[875]: add /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/usb/lp0
[   159.066] [   14.463061] tda9887 4-0042: creating new instance
[   159.066] [   14.463069] tda9887 4-0042: tda988[5/6/7] found
[   159.066] [   14.463732] tuner 4-0042: Tuner 74 found with type(s) Radio TV.
[   159.066] [   14.470378] tuner 4-0061: Tuner -1 found with type(s) Radio TV.
[   159.066] [   15.287195] tuner-simple 4-0061: creating new instance
[   159.066] [   15.287206] tuner-simple 4-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[   159.066] [   15.288049] bttv: 0: registered device video1
[   159.066] [   15.288144] bttv: 0: registered device vbi0
[   159.066] [   15.288232] bttv: 0: registered device radio0
[   159.066] [   15.291423] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
[   159.066] [   15.313874] bttv: PLL set ok
[   159.066] [   15.398578] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   159.066] [   15.399117] ieee80211 phy0: hwaddr 00:15:af:08:a9:e5, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[   159.066] [   15.438537] rtl8187: Customer ID is 0x00
[   159.066] [   15.438636] Registered led device: rtl8187-phy0::radio
[   159.066] [   15.438685] Registered led device: rtl8187-phy0::tx
[   159.066] [   15.438738] Registered led device: rtl8187-phy0::rx
[   159.066] [   15.440286] rtl8187: wireless switch is on
[   159.066] [   15.440497] usbcore: registered new interface driver rtl8187
[   159.066] [   15.555870] ifup[928]: Service network not started and mode 'auto' -> skipping
[   159.066] [   15.801085] udev-configure-printer[862]: failed to connect to CUPS server; giving up
[   159.066] [   15.802995] udev-configure-printer[875]: device devpath is /devices/pci0000:00/0000:00:02.0/usb2/2-2
[   159.066] [   15.803173] udev-configure-printer[875]: MFG:HEWLETT-PACKARD MDL:DESKJET 960C SERN:HU1BU1S14HRO serial:HU1BU1S14HRO
[   159.066] [   16.077937] Adding 6287356k swap on /dev/sda5.  Priority:0 extents:1 across:6287356k 
[   159.066] [   16.343202] mount[936]: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
[   159.066] [   16.344110] mount[937]: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
[   159.066] [   16.439719] fuse init (API version 7.18)
[   159.066] [   16.811551] udev-configure-printer[875]: failed to connect to CUPS server; giving up
[   159.066] [   16.817704] systemd-fsck[938]: /dev/sda2: stelle das Journal wieder her
[   159.066] [   16.829813] mount[946]: mount: fusectl ist bereits eingehängt oder /sys/fs/fuse/connections wird gerade benutzt
[   159.066] [   16.830712] mount[946]: mount: Laut mtab ist fusectl schon auf /sys/fs/fuse/connections eingehängt
[   159.066] [   16.831438] systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32
[   159.066] [   18.162130] systemd-fsck[938]: /dev/sda2: sauber, 534872/10747904 Dateien, 16835121/42965760 Blöcke
[   159.066] [   18.705276] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   159.066] [   18.759349] ntfs-3g[955]: Version 2012.1.15 integrated FUSE 27
[   159.066] [   18.759371] ntfs-3g[955]: Mounted /dev/sda3 (Read-Write, label "", NTFS 3.1)
[   159.066] [   18.759386] ntfs-3g[955]: Cmdline options: rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dmask=022,locale=de_DE.UTF-8
[   159.066] [   18.759402] ntfs-3g[955]: Mount options: rw,noexec,nosuid,nodev,users,allow_other,nonempty,relatime,fsname=/dev/sda3,blkdev,blksize=4096,default_permissions
[   159.066] [   18.759417] ntfs-3g[955]: Global ownership and permissions enforced, configuration type 1
[   159.066] [   18.759431] ntfs-3g[955]: Warning : using problematic uid==0 and gid!=0
[   159.066] [   19.407827] ntfs-3g[957]: Version 2012.1.15 integrated FUSE 27
[   159.066] [   19.407850] ntfs-3g[957]: Mounted /dev/sda4 (Read-Write, label "", NTFS 3.1)
[   159.066] [   19.407865] ntfs-3g[957]: Cmdline options: rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dmask=022,locale=de_DE.UTF-8
[   159.066] [   19.407881] ntfs-3g[957]: Mount options: rw,noexec,nosuid,nodev,users,allow_other,nonempty,relatime,fsname=/dev/sda4,blkdev,blksize=4096,default_permissions
[   159.066] [   19.407897] ntfs-3g[957]: Global ownership and permissions enforced, configuration type 1
[   159.066] [   19.407911] ntfs-3g[957]: Warning : using problematic uid==0 and gid!=0
[   159.066] [   22.327960] systemd[1]: NetworkManager.service: control process exited, code=exited status=1
[   159.066] [   22.342763] systemd[1]: Job NetworkManager-wait-online.service/start failed with result 'dependency'.
[   159.066] [   22.342797] systemd[1]: Unit NetworkManager.service entered failed state.
[   159.066] [   22.822337] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   159.066] [   23.130136] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   159.066] [   23.292650] ip_tables: (C) 2000-2006 Netfilter Core Team
[   159.066] [   30.163856] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   159.066] [   30.163886] forcedeth 0000:00:07.0: eth0: MSI enabled
[   159.066] [   30.226532] NET: Registered protocol family 17
[   159.066] [   33.879132] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=0
[   159.066] [   33.959709] EXT4-fs (sda2): re-mounted. Opts: commit=0
[   159.066] [   40.506023] eth0: no IPv6 routers present
[   159.066] [   46.927770] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.066] [   46.953147] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.066] [   52.763773] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.066] [   52.786776] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   52.863523] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   52.886399] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   52.961902] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   52.986486] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   53.086573] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   53.115067] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   53.233784] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   53.259789] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   58.390786] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   58.416915] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   58.535179] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   58.560784] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   58.677712] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   58.704705] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   58.821082] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   58.848063] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   63.990700] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   64.016788] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   64.133714] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   64.160945] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   64.272787] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   64.300916] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   64.414735] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   64.441560] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   69.567277] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   69.589041] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   69.665052] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   69.689128] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   69.806076] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   69.833067] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   69.947295] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   69.974279] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   75.086540] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   75.110157] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   75.207815] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   75.252293] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   75.403398] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   75.424899] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   75.494912] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   75.519041] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   80.643245] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   80.670975] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   80.788671] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   80.819413] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   80.894925] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   80.918035] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   81.001473] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   81.025528] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   86.174122] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   86.199916] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   86.315495] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   86.341091] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   86.455638] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   86.482067] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   86.644035] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   86.666151] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   91.772652] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   91.794776] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   91.870775] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   91.892900] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   91.986280] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   92.007902] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   92.079527] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   92.101154] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   97.188903] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   97.211778] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   97.297408] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   97.318901] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   97.394528] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   97.418407] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   97.500044] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   97.521776] ALSA sound/usb/clock.c:236 2:2:1: cannot get freq at ep 0x84
[   159.067] [   99.489962] [drm] nouveau 0000:00:0d.0: fail post-validate sync
[   159.067] [   99.489967] [drm] nouveau 0000:00:0d.0: validate vram_list
[   159.067] [   99.489972] [drm] nouveau 0000:00:0d.0: validate: -16
[   159.067] [  101.201242] [drm] nouveau 0000:00:0d.0: fail pre-validate sync
[   159.067] [  101.201247] [drm] nouveau 0000:00:0d.0: validate vram_list
[   159.067] [  101.201253] [drm] nouveau 0000:00:0d.0: validate: -16
[   159.067] [  102.191430] [drm] nouveau 0000:00:0d.0: fail pre-validate sync
[   159.067] [  102.191435] [drm] nouveau 0000:00:0d.0: validate vram_list
[   159.067] [  102.191440] [drm] nouveau 0000:00:0d.0: validate: -16
[   159.067] [  103.170624] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.067] [  104.165136] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.067] [  105.142922] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.067] [  106.119850] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.067] [  107.092445] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.067] [  108.149579] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.067] [  109.211411] [drm] nouveau 0000:00:0d.0: fail pre-validate sync
[   159.067] [  109.211416] [drm] nouveau 0000:00:0d.0: validate vram_list
[   159.067] [  109.211422] [drm] nouveau 0000:00:0d.0: validate: -16
[   159.067] [  110.178047] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.067] [  111.166406] [drm] nouveau 0000:00:0d.0: fail pre-validate sync
[   159.067] [  111.166411] [drm] nouveau 0000:00:0d.0: validate vram_list
[   159.067] [  111.166415] [drm] nouveau 0000:00:0d.0: validate: -16
[   159.068] [  112.163742] [drm] nouveau 0000:00:0d.0: fail pre-validate sync
[   159.068] [  112.163747] [drm] nouveau 0000:00:0d.0: validate vram_list
[   159.068] [  112.163752] [drm] nouveau 0000:00:0d.0: validate: -16
[   159.068] [  113.129791] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  114.086811] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  115.129720] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  116.112637] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  117.096791] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  118.071781] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  119.047631] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  120.073575] [drm] nouveau 0000:00:0d.0: fail pre-validate sync
[   159.068] [  120.073580] [drm] nouveau 0000:00:0d.0: validate vram_list
[   159.068] [  120.073585] [drm] nouveau 0000:00:0d.0: validate: -16
[   159.068] [  121.051540] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  122.026789] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  122.995855] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  123.961338] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  124.926095] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  125.896813] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  126.861242] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  127.838158] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  128.801467] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  129.812103] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  130.792804] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  131.761034] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  132.723854] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  133.686649] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  134.664793] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  135.634505] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  136.608714] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  137.574854] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  138.546175] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  139.520308] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  140.494262] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  141.466359] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  142.474075] [drm] nouveau 0000:00:0d.0: fail pre-validate sync
[   159.068] [  142.474080] [drm] nouveau 0000:00:0d.0: validate vram_list
[   159.068] [  142.474085] [drm] nouveau 0000:00:0d.0: validate: -16
[   159.068] [  143.477572] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  144.451068] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  145.426933] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  146.408273] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  147.373639] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  148.350215] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  149.333557] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  150.302745] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  151.271659] [drm] nouveau 0000:00:0d.0: cal_space: -16
[   159.068] [  152.246905] [drm] nouveau 0000:00:0d.0: cal_space: -16