[ 441.251] X.Org X Server 1.11.0 Release Date: 2011-08-26 [ 441.251] X Protocol Version 11, Revision 0 [ 441.251] Build Operating System: safari 3.0.10+ [ 441.251] Current Operating System: Linux safari.finland.fbi 3.0.14-usbdebug+ #10 SMP Thu Dec 22 19:59:22 EET 2011 x86_64 [ 441.251] Kernel command line: BOOT_IMAGE=/boot/grub2/bzImage-3.0.14-008 rw root=/dev/sdb1 rootfstype=xfs i915.modeset=1 vga=6 noisapnp enforcing=0 selinux=0 printk.time=1 log_buf_len=512k nodmraid nompath raid=noautodetect random_debug=0 processor.max_cstate=0 usbhid.mousepoll=1 memtest=0 scsi_mod.max_luns=512 init=/bin/systemd [ 441.251] Build Date: 30 November 2011 10:54:51PM [ 441.251] Build ID: xorg-x11-server 1.11.99.1-8.20111109.fc17 [ 441.251] Current version of pixman: 0.24.0 [ 441.251] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 441.251] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 441.251] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 23 12:17:13 2011 [ 441.251] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 441.251] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 441.252] (==) No Layout section. Using the first Screen section. [ 441.252] (==) No screen section available. Using defaults. [ 441.252] (**) |-->Screen "Default Screen Section" (0) [ 441.252] (**) | |-->Monitor "" [ 441.252] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 441.252] (==) Automatically adding devices [ 441.252] (==) Automatically enabling devices [ 441.252] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 441.252] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 441.252] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 441.253] (--) PCI:*(0:0:2:0) 8086:0112:1043:844d rev 9, Mem @ 0xfb400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072 [ 441.253] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 441.253] (II) Module extmod: vendor="X.Org Foundation" [ 441.253] compiled for 1.11.0, module version = 1.0.0 [ 441.254] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 441.254] (II) Module dbe: vendor="X.Org Foundation" [ 441.254] compiled for 1.11.0, module version = 1.0.0 [ 441.254] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 441.254] (II) Module glx: vendor="X.Org Foundation" [ 441.254] compiled for 1.11.0, module version = 1.0.0 [ 441.254] (==) AIGLX enabled [ 441.254] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 441.254] (II) Module record: vendor="X.Org Foundation" [ 441.254] compiled for 1.11.0, module version = 1.13.0 [ 441.254] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 441.254] (II) Module dri: vendor="X.Org Foundation" [ 441.254] compiled for 1.11.0, module version = 1.0.0 [ 441.255] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 441.255] (II) Module dri2: vendor="X.Org Foundation" [ 441.255] compiled for 1.11.0, module version = 1.2.0 [ 441.255] (==) Matched intel as autoconfigured driver 0 [ 441.255] (==) Matched vesa as autoconfigured driver 1 [ 441.255] (==) Matched fbdev as autoconfigured driver 2 [ 441.255] (==) Assigned the driver to the xf86ConfigLayout [ 441.255] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 441.255] (II) Module intel: vendor="X.Org Foundation" [ 441.255] compiled for 1.11.0, module version = 2.17.0 [ 441.255] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 441.255] (II) Module vesa: vendor="X.Org Foundation" [ 441.255] compiled for 1.11.0, module version = 2.3.0 [ 441.255] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 441.255] (II) Module fbdev: vendor="X.Org Foundation" [ 441.255] compiled for 1.11.0, module version = 0.4.2 [ 441.255] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 441.256] (II) VESA: driver for VESA chipsets: vesa [ 441.256] (II) FBDEV: driver for framebuffer: fbdev [ 441.256] (--) using VT number 7 [ 441.262] (II) intel(0): SNA compiled from 2.17.0-216-g56e9727 [ 441.262] (WW) Falling back to old probe method for vesa [ 441.262] (WW) Falling back to old probe method for fbdev [ 441.262] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 441.262] (II) Module fbdevhw: vendor="X.Org Foundation" [ 441.262] compiled for 1.11.0, module version = 0.0.2 [ 441.263] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 441.263] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 441.263] (==) intel(0): RGB weight 888 [ 441.263] (==) intel(0): Default visual is TrueColor [ 441.263] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Desktop (GT2) [ 441.263] (--) intel(0): Chipset: "Sandybridge Desktop (GT2)" [ 441.263] (--) intel(0): Disabling use of vmap [ 441.263] (**) intel(0): Framebuffer tiled [ 441.263] (**) intel(0): Pixmaps tiled [ 441.263] (**) intel(0): 3D buffers tiled [ 441.263] (**) intel(0): Throttling enabled [ 441.263] (**) intel(0): Delayed flush enabled [ 441.273] (II) intel(0): Output VGA1 has no monitor section [ 441.394] (II) intel(0): Output HDMI1 has no monitor section [ 441.406] (II) intel(0): Output DP1 has no monitor section [ 441.428] (II) intel(0): Output HDMI2 has no monitor section [ 441.450] (II) intel(0): Output HDMI3 has no monitor section [ 441.463] (II) intel(0): Output DP2 has no monitor section [ 441.475] (II) intel(0): Output DP3 has no monitor section [ 441.475] (II) intel(0): EDID for output VGA1 [ 441.596] (II) intel(0): EDID for output HDMI1 [ 441.596] (II) intel(0): Manufacturer: HWP Model: 286a Serial#: 16843009 [ 441.596] (II) intel(0): Year: 2010 Week: 12 [ 441.596] (II) intel(0): EDID Version: 1.3 [ 441.596] (II) intel(0): Digital Display Input [ 441.596] (II) intel(0): Max Image Size [cm]: horiz.: 54 vert.: 35 [ 441.596] (II) intel(0): Gamma: 2.20 [ 441.596] (II) intel(0): DPMS capabilities: Off [ 441.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 441.596] (II) intel(0): Default color space is primary color space [ 441.596] (II) intel(0): First detailed timing is preferred mode [ 441.596] (II) intel(0): redX: 0.644 redY: 0.335 greenX: 0.304 greenY: 0.613 [ 441.596] (II) intel(0): blueX: 0.146 blueY: 0.070 whiteX: 0.312 whiteY: 0.329 [ 441.596] (II) intel(0): Supported established timings: [ 441.596] (II) intel(0): 640x480@60Hz [ 441.596] (II) intel(0): 800x600@60Hz [ 441.596] (II) intel(0): 1024x768@60Hz [ 441.596] (II) intel(0): Manufacturer's mask: 0 [ 441.596] (II) intel(0): Supported standard timings: [ 441.596] (II) intel(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 441.596] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 441.596] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 441.596] (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 441.596] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 441.596] (II) intel(0): #5: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 441.596] (II) intel(0): Supported detailed timing: [ 441.596] (II) intel(0): clock: 154.0 MHz Image Size: 546 x 352 mm [ 441.596] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 441.596] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 [ 441.596] (II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 24 H max: 80 kHz, PixClock max 175 MHz [ 441.596] (II) intel(0): Monitor name: HP ZR24w [ 441.596] (II) intel(0): Serial No: CNT01210Q6 [ 441.596] (II) intel(0): EDID (in hex): [ 441.596] (II) intel(0): 00ffffffffffff0022f06a2801010101 [ 441.596] (II) intel(0): 0c140103803623782efc81a4554d9d25 [ 441.596] (II) intel(0): 125054210800814081809500a940b300 [ 441.596] (II) intel(0): d1c001010101283c80a070b023403020 [ 441.596] (II) intel(0): 360022602100001a000000fd003b3d18 [ 441.596] (II) intel(0): 5011000a202020202020000000fc0048 [ 441.596] (II) intel(0): 50205a523234770a20202020000000ff [ 441.596] (II) intel(0): 00434e54303132313051360a2020005d [ 441.596] (II) intel(0): Printing probed modes for output HDMI1 [ 441.596] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 441.596] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 441.596] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 441.596] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 441.596] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 441.596] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 441.596] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 441.596] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 441.596] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 441.609] (II) intel(0): EDID for output DP1 [ 441.631] (II) intel(0): EDID for output HDMI2 [ 441.653] (II) intel(0): EDID for output HDMI3 [ 441.666] (II) intel(0): EDID for output DP2 [ 441.678] (II) intel(0): EDID for output DP3 [ 441.678] (II) intel(0): Output VGA1 disconnected [ 441.678] (II) intel(0): Output HDMI1 connected [ 441.678] (II) intel(0): Output DP1 disconnected [ 441.678] (II) intel(0): Output HDMI2 disconnected [ 441.678] (II) intel(0): Output HDMI3 disconnected [ 441.678] (II) intel(0): Output DP2 disconnected [ 441.678] (II) intel(0): Output DP3 disconnected [ 441.678] (II) intel(0): Using exact sizes for initial modes [ 441.678] (II) intel(0): Output HDMI1 using initial mode 1920x1200 +0+0 [ 441.678] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 441.678] (==) intel(0): DPI set to (96, 96) [ 441.678] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 441.678] (II) Module fb: vendor="X.Org Foundation" [ 441.678] compiled for 1.11.0, module version = 1.0.0 [ 441.678] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 441.678] (II) Module dri2: vendor="X.Org Foundation" [ 441.678] compiled for 1.11.0, module version = 1.2.0 [ 441.678] (II) Unloading vesa [ 441.678] (II) Unloading fbdev [ 441.678] (II) Unloading fbdevhw [ 441.678] (==) Depth 24 pixmap format is 32 bpp [ 441.678] (II) intel(0): SNA initialized with SandyBridge backend [ 441.678] (==) intel(0): Backing store disabled [ 441.678] (==) intel(0): Silken mouse enabled [ 441.678] (II) intel(0): Initializing HW Cursor [ 441.678] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 441.679] (==) intel(0): DPMS enabled [ 441.679] (II) intel(0): Overlay video not supported on this hardware [ 441.679] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 441.679] (II) intel(0): [DRI2] Setup complete [ 441.679] (II) intel(0): [DRI2] DRI driver: i965 [ 441.679] (II) intel(0): direct rendering: DRI2 Enabled [ 441.679] (==) intel(0): hotplug detection: "enabled" [ 441.679] (--) RandR disabled [ 441.679] (II) SELinux: Disabled on system [ 441.683] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 441.683] (II) AIGLX: enabled GLX_INTEL_swap_event [ 441.683] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 441.683] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 441.683] (II) AIGLX: Loaded and initialized i965 [ 441.683] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 441.744] (II) intel(0): Setting screen physical size to 508 x 317 [ 441.788] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 441.788] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 441.788] (**) Power Button: Applying InputClass "generic mouse" [ 441.788] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 441.788] (II) Module evdev: vendor="X.Org Foundation" [ 441.788] compiled for 1.11.0, module version = 2.6.99 [ 441.788] (II) Using input driver 'evdev' for 'Power Button' [ 441.788] (**) Power Button: always reports core events [ 441.788] (**) evdev: Power Button: Device: "/dev/input/event5" [ 441.788] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 441.788] (--) evdev: Power Button: Found keys [ 441.788] (II) evdev: Power Button: Configuring as keyboard [ 441.788] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 441.802] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 441.802] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 441.802] (**) Video Bus: Applying InputClass "generic mouse" [ 441.802] (II) Using input driver 'evdev' for 'Video Bus' [ 441.802] (**) Video Bus: always reports core events [ 441.802] (**) evdev: Video Bus: Device: "/dev/input/event7" [ 441.802] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 441.802] (--) evdev: Video Bus: Found keys [ 441.802] (II) evdev: Video Bus: Configuring as keyboard [ 441.802] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 441.802] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 441.802] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 441.802] (**) Power Button: Applying InputClass "generic mouse" [ 441.802] (II) Using input driver 'evdev' for 'Power Button' [ 441.803] (**) Power Button: always reports core events [ 441.803] (**) evdev: Power Button: Device: "/dev/input/event4" [ 441.803] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 441.803] (--) evdev: Power Button: Found keys [ 441.803] (II) evdev: Power Button: Configuring as keyboard [ 441.803] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 441.803] (II) config/udev: Adding input device USB Keyboard (/dev/input/event0) [ 441.803] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 441.803] (**) USB Keyboard: Applying InputClass "generic mouse" [ 441.803] (II) Using input driver 'evdev' for 'USB Keyboard' [ 441.803] (**) USB Keyboard: always reports core events [ 441.803] (**) evdev: USB Keyboard: Device: "/dev/input/event0" [ 441.803] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1818 [ 441.803] (--) evdev: USB Keyboard: Found keys [ 441.803] (II) evdev: USB Keyboard: Configuring as keyboard [ 441.803] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 9) [ 441.804] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1) [ 441.804] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 441.804] (**) USB Keyboard: Applying InputClass "generic mouse" [ 441.804] (II) Using input driver 'evdev' for 'USB Keyboard' [ 441.804] (**) USB Keyboard: always reports core events [ 441.804] (**) evdev: USB Keyboard: Device: "/dev/input/event1" [ 441.804] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1818 [ 441.804] (--) evdev: USB Keyboard: Found keys [ 441.804] (II) evdev: USB Keyboard: Configuring as keyboard [ 441.804] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10) [ 441.804] (II) config/udev: Adding input device Burr-Brown from TI USB Audio DAC (/dev/input/event2) [ 441.804] (**) Burr-Brown from TI USB Audio DAC : Applying InputClass "evdev keyboard catchall" [ 441.804] (**) Burr-Brown from TI USB Audio DAC : Applying InputClass "generic mouse" [ 441.804] (II) Using input driver 'evdev' for 'Burr-Brown from TI USB Audio DAC ' [ 441.804] (**) Burr-Brown from TI USB Audio DAC : always reports core events [ 441.804] (**) evdev: Burr-Brown from TI USB Audio DAC : Device: "/dev/input/event2" [ 441.804] (--) evdev: Burr-Brown from TI USB Audio DAC : Vendor 0x8bb Product 0x2706 [ 441.804] (--) evdev: Burr-Brown from TI USB Audio DAC : Found keys [ 441.804] (II) evdev: Burr-Brown from TI USB Audio DAC : Configuring as keyboard [ 441.804] (II) XINPUT: Adding extended input device "Burr-Brown from TI USB Audio DAC " (type: KEYBOARD, id 11) [ 441.805] (II) config/udev: Adding input device La-VIEW Technology SteelSeries (/dev/input/event3) [ 441.805] (**) La-VIEW Technology SteelSeries : Applying InputClass "evdev pointer catchall" [ 441.805] (**) La-VIEW Technology SteelSeries : Applying InputClass "generic mouse" [ 441.805] (II) Using input driver 'evdev' for 'La-VIEW Technology SteelSeries ' [ 441.805] (**) La-VIEW Technology SteelSeries : always reports core events [ 441.805] (**) evdev: La-VIEW Technology SteelSeries : Device: "/dev/input/event3" [ 441.805] (--) evdev: La-VIEW Technology SteelSeries : Vendor 0x1038 Product 0x1361 [ 441.805] (--) evdev: La-VIEW Technology SteelSeries : Found 12 mouse buttons [ 441.805] (--) evdev: La-VIEW Technology SteelSeries : Found scroll wheel(s) [ 441.805] (--) evdev: La-VIEW Technology SteelSeries : Found relative axes [ 441.805] (--) evdev: La-VIEW Technology SteelSeries : Found x and y relative axes [ 441.805] (II) evdev: La-VIEW Technology SteelSeries : Configuring as mouse [ 441.805] (II) evdev: La-VIEW Technology SteelSeries : Adding scrollwheel support [ 441.805] (**) evdev: La-VIEW Technology SteelSeries : YAxisMapping: buttons 4 and 5 [ 441.805] (**) evdev: La-VIEW Technology SteelSeries : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 441.805] (II) XINPUT: Adding extended input device "La-VIEW Technology SteelSeries " (type: MOUSE, id 12) [ 441.805] (II) evdev: La-VIEW Technology SteelSeries : initialized for relative axes. [ 441.805] (**) La-VIEW Technology SteelSeries : (accel) selected scheme none/0 [ 441.805] (**) La-VIEW Technology SteelSeries : (accel) acceleration factor: 1.000 [ 441.805] (**) La-VIEW Technology SteelSeries : (accel) acceleration threshold: 0 [ 441.805] (II) config/udev: Adding input device La-VIEW Technology SteelSeries (/dev/input/mouse0) [ 441.806] (**) La-VIEW Technology SteelSeries : Applying InputClass "generic mouse" [ 441.806] (II) No input driver/identifier specified (ignoring)