[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-rc3+ (reinhard@apollon) (gcc version 4.4.4 (Debian 4.4.4-6) ) #37 SMP Fri Jul 2 21:49:46 CEST 2010 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc3+ root=UUID=9bb56ba6-3117-47d6-b07c-2cca477643e9 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf6c0000 (usable) [ 0.000000] BIOS-e820: 00000000cf6c0000 - 00000000cf6ca000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf6ca000 - 00000000cf6ce000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 120000000 mask FF0000000 write-back [ 0.000000] 5 base 0CF700000 mask FFFF00000 uncachable [ 0.000000] 6 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cf700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcf6c0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf6c0000 [ 0.000000] 0000000000 - 00cf600000 page 2M [ 0.000000] 00cf600000 - 00cf6c0000 page 4k [ 0.000000] kernel direct mapping tables up to cf6c0000 @ 16000-1c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 1a000-20000 [ 0.000000] RAMDISK: 37c0e000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f6100 00024 (v02 FUJ ) [ 0.000000] ACPI: XSDT 00000000cf6c15c9 0007C (v01 FSC PC 01070000 FUJ 00000100) [ 0.000000] ACPI: SSDT 00000000cf6c7b4a 00270 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: FACP 00000000cf6c7dba 000F4 (v03 FSC PC 01070000 FUJ 00000100) [ 0.000000] ACPI: DSDT 00000000cf6c1645 06505 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: FACS 00000000cf6cdfc0 00040 [ 0.000000] ACPI: HPET 00000000cf6c7eae 00038 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: MCFG 00000000cf6c7ee6 0003C (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: SSDT 00000000cf6c7f22 00523 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: SSDT 00000000cf6c8445 006F2 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: SSDT 00000000cf6c8b37 00E08 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: SSDT 00000000cf6c993f 00447 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: APIC 00000000cf6c9d86 00068 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: BOOT 00000000cf6c9dee 00028 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.000000] ACPI: SLIC 00000000cf6c9e16 00176 (v01 FSC PC 01070000 FUJ 00000100) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] bootmap [0000000100005000 - 000000010002afff] pages 26 [ 0.000000] (10/32 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0001000000 - 000177cee4] TEXT DATA BSS ==> [0001000000 - 000177cee4] [ 0.000000] #1 [0037c0e000 - 0037ff0000] RAMDISK ==> [0037c0e000 - 0037ff0000] [ 0.000000] #2 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #3 [000177d000 - 000177d0f6] BRK ==> [000177d000 - 000177d0f6] [ 0.000000] #4 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] [ 0.000000] #5 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] [ 0.000000] #6 [0000016000 - 000001a000] PGTABLE ==> [0000016000 - 000001a000] [ 0.000000] #7 [000001a000 - 000001b000] PGTABLE ==> [000001a000 - 000001b000] [ 0.000000] #8 [0100000000 - 0100005000] NODE_DATA ==> [0100000000 - 0100005000] [ 0.000000] #9 [0100005000 - 010002b000] BOOTMAP ==> [0100005000 - 010002b000] [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100600000-ffff880103ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cf6c0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1046094 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 109 pages reserved [ 0.000000] DMA zone: 3817 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 831224 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cf6c0000 - 00000000cf6ca000 [ 0.000000] PM: Registered nosave memory: 00000000cf6ca000 - 00000000cf6ce000 [ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001800000 s78272 r8192 d24128 u1048576 [ 0.000000] pcpu-alloc: s78272 r8192 d24128 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028961 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc3+ root=UUID=9bb56ba6-3117-47d6-b07c-2cca477643e9 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4046744k/4980736k available (2772k kernel code, 796360k absent, 137632k reserved, 3835k data, 548k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1197.199 MHz processor. [ 0.010011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.39 BogoMIPS (lpj=11971990) [ 0.010017] pid_max: default: 32768 minimum: 301 [ 0.010041] Security Framework initialized [ 0.010613] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013286] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.020747] Mount-cache hash table entries: 256 [ 0.020943] Initializing cgroup subsys ns [ 0.020949] Initializing cgroup subsys cpuacct [ 0.020955] Initializing cgroup subsys devices [ 0.020958] Initializing cgroup subsys freezer [ 0.020961] Initializing cgroup subsys net_cls [ 0.020990] CPU: Physical Processor ID: 0 [ 0.020992] CPU: Processor Core ID: 0 [ 0.020995] mce: CPU supports 6 MCE banks [ 0.021005] CPU0: Thermal monitoring enabled (TM2) [ 0.021010] using mwait in idle threads. [ 0.021013] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.021020] PEBS disabled due to CPU errata. [ 0.021026] ... version: 2 [ 0.021028] ... bit width: 40 [ 0.021030] ... generic registers: 2 [ 0.021033] ... value mask: 000000ffffffffff [ 0.021036] ... max period: 000000007fffffff [ 0.021038] ... fixed-purpose events: 3 [ 0.021040] ... event mask: 0000000700000003 [ 0.022330] ACPI: Core revision 20100428 [ 0.036777] Setting APIC routing to flat [ 0.037181] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.137225] CPU0: Intel(R) Core(TM)2 Duo CPU L7100 @ 1.20GHz stepping 0b [ 0.140000] Booting Node 0, Processors #1 Ok. [ 0.300019] Brought up 2 CPUs [ 0.300024] Total of 2 processors activated (4788.41 BogoMIPS). [ 0.300981] devtmpfs: initialized [ 0.304933] regulator: core version 0.5 [ 0.304933] NET: Registered protocol family 16 [ 0.304933] ACPI: bus type pci registered [ 0.304933] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.304933] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.317998] PCI: Using configuration type 1 for base access [ 0.318623] bio: create slab at 0 [ 0.321048] ACPI: EC: Look up EC in DSDT [ 0.325606] ACPI: 00000000cf6cda9f 003B7 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.326621] ACPI: Enabled 0 new runtime GPEs, added 6 new wakeup GPEs [ 0.326630] ACPI: Dynamic OEM Table Load: [ 0.326635] ACPI: (null) 003B7 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.331165] ACPI: SSDT 00000000cf6cac73 001F6 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.331795] ACPI: Dynamic OEM Table Load: [ 0.331800] ACPI: SSDT (null) 001F6 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.332272] ACPI: SSDT 00000000cf6cb173 005CD (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.332868] ACPI: Dynamic OEM Table Load: [ 0.332873] ACPI: SSDT (null) 005CD (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.333563] ACPI: SSDT 00000000cf6cb0bb 000B8 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.334182] ACPI: Dynamic OEM Table Load: [ 0.334187] ACPI: SSDT (null) 000B8 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.334460] ACPI: SSDT 00000000cf6cb740 00047 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.335063] ACPI: Dynamic OEM Table Load: [ 0.335067] ACPI: SSDT (null) 00047 (v01 FUJ FJNB1E3 01070000 FUJ 00000100) [ 0.335295] ACPI: Interpreter enabled [ 0.335299] ACPI: (supports S0 S3 S4 S5) [ 0.335340] ACPI: Using IOAPIC for interrupt routing [ 0.347019] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.348030] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.348036] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.348887] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.350545] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.350550] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.350555] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.350561] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.350566] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.350570] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.350576] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfebfffff] [ 0.350667] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc0fffff 64bit] [ 0.350678] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.350686] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.350740] pci 0000:00:02.1: reg 10: [mem 0xfc100000-0xfc1fffff 64bit] [ 0.350928] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] [ 0.351041] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] [ 0.351162] pci 0000:00:1a.7: reg 10: [mem 0xfc704000-0xfc7043ff] [ 0.351276] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.351287] pci 0000:00:1a.7: PME# disabled [ 0.351364] pci 0000:00:1b.0: reg 10: [mem 0xfc700000-0xfc703fff 64bit] [ 0.351477] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.351486] pci 0000:00:1b.0: PME# disabled [ 0.351673] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.351684] pci 0000:00:1c.0: PME# disabled [ 0.351874] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.351885] pci 0000:00:1c.4: PME# disabled [ 0.352000] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f] [ 0.352119] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f] [ 0.352241] pci 0000:00:1d.7: reg 10: [mem 0xfc704400-0xfc7047ff] [ 0.352356] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.352366] pci 0000:00:1d.7: PME# disabled [ 0.352648] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.352657] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.352666] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at fd00 (mask 007f) [ 0.352758] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.352773] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.352788] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.352803] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.352818] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f] [ 0.352917] pci 0000:00:1f.2: reg 10: [io 0x18e0-0x18e7] [ 0.352930] pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7] [ 0.352943] pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df] [ 0.352958] pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3] [ 0.352973] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf] [ 0.352987] pci 0000:00:1f.2: reg 24: [io 0x18b0-0x18bf] [ 0.353048] pci 0000:00:1f.2: PME# supported from D3hot [ 0.353057] pci 0000:00:1f.2: PME# disabled [ 0.353104] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff] [ 0.353146] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.353378] pci 0000:04:00.0: reg 10: [mem 0xfc200000-0xfc203fff 64bit] [ 0.353394] pci 0000:04:00.0: reg 18: [io 0x2000-0x20ff] [ 0.353442] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.353517] pci 0000:04:00.0: supports D1 D2 [ 0.353521] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.353532] pci 0000:04:00.0: PME# disabled [ 0.353555] pci 0000:00:1c.0: PCI bridge to [bus 04-07] [ 0.353563] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.353574] pci 0000:00:1c.0: bridge window [mem 0xfc200000-0xfc2fffff] [ 0.353589] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.353865] pci 0000:14:00.0: reg 10: [mem 0xfc300000-0xfc301fff 64bit] [ 0.354157] pci 0000:14:00.0: PME# supported from D0 D3hot D3cold [ 0.354193] pci 0000:14:00.0: PME# disabled [ 0.354279] pci 0000:00:1c.4: PCI bridge to [bus 14-1b] [ 0.354288] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.354300] pci 0000:00:1c.4: bridge window [mem 0xfc300000-0xfc3fffff] [ 0.354316] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.354443] pci 0000:1c:03.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.354489] pci 0000:1c:03.0: supports D1 D2 [ 0.354492] pci 0000:1c:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.354504] pci 0000:1c:03.0: PME# disabled [ 0.354575] pci 0000:1c:03.2: reg 10: [mem 0xfc400000-0xfc4000ff] [ 0.354688] pci 0000:1c:03.2: supports D1 D2 [ 0.354692] pci 0000:1c:03.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.354704] pci 0000:1c:03.2: PME# disabled [ 0.354812] pci 0000:00:1e.0: PCI bridge to [bus 1c-1d] (subtractive decode) [ 0.354820] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.354829] pci 0000:00:1e.0: bridge window [mem 0xfc400000-0xfc4fffff] [ 0.354845] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.354850] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.354854] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.354859] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.354864] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.354869] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.354873] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.354878] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode) [ 0.354972] pci_bus 0000:1d: [bus 1d-20] partially hidden behind transparent bridge 0000:1c [bus 1c-1d] [ 0.355021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.355409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.355566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.355767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.364275] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.364463] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.364650] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.364835] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.365020] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.365203] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.365394] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.365579] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.365665] HEST: Table is not found! [ 0.365737] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.365758] vgaarb: loaded [ 0.365784] PCI: Using ACPI for IRQ routing [ 0.365784] PCI: pci_cache_line_size set to 64 bytes [ 0.365784] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 0.365784] reserve RAM buffer: 00000000cf6c0000 - 00000000cfffffff [ 0.365784] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.365784] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.365784] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.370024] Switching to clocksource tsc [ 0.370067] pnp: PnP ACPI init [ 0.370078] ACPI: bus type pnp registered [ 0.373972] pnp: PnP ACPI: found 9 devices [ 0.373976] ACPI: ACPI bus type pnp unregistered [ 0.373993] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.373999] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.374004] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.374009] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.374018] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.374023] system 00:01: [io 0x1100-0x111f] has been reserved [ 0.374027] system 00:01: [io 0x1180-0x11bf] has been reserved [ 0.374032] system 00:01: [io 0x1640-0x164f] has been reserved [ 0.374037] system 00:01: [io 0xf800-0xf87f] has been reserved [ 0.374042] system 00:01: [io 0xf880-0xf8ff] has been reserved [ 0.374047] system 00:01: [io 0xfc00-0xfc7f] has been reserved [ 0.374052] system 00:01: [io 0xfc80-0xfcff] has been reserved [ 0.374057] system 00:01: [io 0xfd00-0xfd7f] has been reserved [ 0.374062] system 00:01: [io 0xfe00-0xfe03] has been reserved [ 0.374072] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.374077] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.374082] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.374087] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.374093] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.374098] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.374103] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.374108] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.374113] system 00:02: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.379022] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref] [ 0.379029] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd4000000-0xd41fffff pref] [ 0.379036] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd4200000-0xd43fffff 64bit pref] [ 0.379042] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff] [ 0.379048] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.379053] pci 0000:00:1f.3: BAR 0: assigned [mem 0xd4400000-0xd44000ff] [ 0.379065] pci 0000:00:1f.3: BAR 0: set to [mem 0xd4400000-0xd44000ff] (PCI address [0xd4400000-0xd44000ff] [ 0.379071] pci 0000:04:00.0: BAR 6: assigned [mem 0xd4000000-0xd401ffff pref] [ 0.379076] pci 0000:00:1c.0: PCI bridge to [bus 04-07] [ 0.379083] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.379097] pci 0000:00:1c.0: bridge window [mem 0xfc200000-0xfc2fffff] [ 0.379108] pci 0000:00:1c.0: bridge window [mem 0xd4000000-0xd41fffff pref] [ 0.379126] pci 0000:00:1c.4: PCI bridge to [bus 14-1b] [ 0.379134] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.379145] pci 0000:00:1c.4: bridge window [mem 0xfc300000-0xfc3fffff] [ 0.379157] pci 0000:00:1c.4: bridge window [mem 0xd4200000-0xd43fffff 64bit pref] [ 0.379174] pci 0000:1c:03.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref] [ 0.379180] pci 0000:1c:03.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] [ 0.379185] pci 0000:1c:03.0: BAR 0: assigned [mem 0xfc401000-0xfc401fff] [ 0.379198] pci 0000:1c:03.0: BAR 0: set to [mem 0xfc401000-0xfc401fff] (PCI address [0xfc401000-0xfc401fff] [ 0.379203] pci 0000:1c:03.0: BAR 13: assigned [io 0x4000-0x40ff] [ 0.379208] pci 0000:1c:03.0: BAR 14: assigned [io 0x4400-0x44ff] [ 0.379212] pci 0000:1c:03.0: CardBus bridge to [bus 1d-20] [ 0.379215] pci 0000:1c:03.0: bridge window [io 0x4000-0x40ff] [ 0.379227] pci 0000:1c:03.0: bridge window [io 0x4400-0x44ff] [ 0.379236] pci 0000:1c:03.0: bridge window [mem 0xd0000000-0xd3ffffff pref] [ 0.379248] pci 0000:1c:03.0: bridge window [mem 0xd8000000-0xdbffffff] [ 0.379258] pci 0000:00:1e.0: PCI bridge to [bus 1c-1d] [ 0.379265] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff] [ 0.379281] pci 0000:00:1e.0: bridge window [mem 0xfc400000-0xfc4fffff] [ 0.379292] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd3ffffff pref] [ 0.379328] alloc irq_desc for 16 on node -1 [ 0.379331] alloc kstat_irqs on node -1 [ 0.379340] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.379350] pci 0000:00:1c.0: setting latency timer to 64 [ 0.379371] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.379383] pci 0000:00:1c.4: setting latency timer to 64 [ 0.379401] pci 0000:00:1e.0: setting latency timer to 64 [ 0.379424] pci 0000:1c:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.379437] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.379441] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.379445] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.379449] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.379453] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.379457] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.379461] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xfebfffff] [ 0.379465] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.379469] pci_bus 0000:04: resource 1 [mem 0xfc200000-0xfc2fffff] [ 0.379473] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd41fffff pref] [ 0.379477] pci_bus 0000:14: resource 0 [io 0x3000-0x3fff] [ 0.379481] pci_bus 0000:14: resource 1 [mem 0xfc300000-0xfc3fffff] [ 0.379486] pci_bus 0000:14: resource 2 [mem 0xd4200000-0xd43fffff 64bit pref] [ 0.379490] pci_bus 0000:1c: resource 0 [io 0x4000-0x4fff] [ 0.379494] pci_bus 0000:1c: resource 1 [mem 0xfc400000-0xfc4fffff] [ 0.379498] pci_bus 0000:1c: resource 2 [mem 0xd0000000-0xd3ffffff pref] [ 0.379502] pci_bus 0000:1c: resource 4 [io 0x0000-0x0cf7] [ 0.379506] pci_bus 0000:1c: resource 5 [io 0x0d00-0xffff] [ 0.379509] pci_bus 0000:1c: resource 6 [mem 0x000a0000-0x000bffff] [ 0.379513] pci_bus 0000:1c: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.379517] pci_bus 0000:1c: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.379521] pci_bus 0000:1c: resource 9 [mem 0x000dc000-0x000dffff] [ 0.379525] pci_bus 0000:1c: resource 10 [mem 0xd0000000-0xfebfffff] [ 0.379529] pci_bus 0000:1d: resource 0 [io 0x4000-0x40ff] [ 0.379533] pci_bus 0000:1d: resource 1 [io 0x4400-0x44ff] [ 0.379537] pci_bus 0000:1d: resource 2 [mem 0xd0000000-0xd3ffffff pref] [ 0.379541] pci_bus 0000:1d: resource 3 [mem 0xd8000000-0xdbffffff] [ 0.379583] NET: Registered protocol family 2 [ 0.379811] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.381651] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.386361] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.387032] TCP: Hash tables configured (established 524288 bind 65536) [ 0.387037] TCP reno registered [ 0.387056] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.387114] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.387310] NET: Registered protocol family 1 [ 0.387342] pci 0000:00:02.0: Boot video device [ 0.387632] PCI: CLS 64 bytes, default 64 [ 0.387707] Unpacking initramfs... [ 0.547441] Freeing initrd memory: 3976k freed [ 0.549406] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.549413] Placing 64MB software IO TLB between ffff88000191b000 - ffff88000591b000 [ 0.549417] software IO TLB at phys 0x191b000 - 0x591b000 [ 0.549489] Simple Boot Flag at 0x7b set to 0x1 [ 0.550502] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.552881] VFS: Disk quotas dquot_6.5.2 [ 0.552974] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.553384] msgmni has been set to 7911 [ 0.553656] alg: No test for stdrng (krng) [ 0.553737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.553742] io scheduler noop registered [ 0.553746] io scheduler deadline registered [ 0.553803] io scheduler cfq registered (default) [ 0.553942] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.554027] alloc irq_desc for 40 on node -1 [ 0.554031] alloc kstat_irqs on node -1 [ 0.554055] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.554231] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.554319] alloc irq_desc for 41 on node -1 [ 0.554322] alloc kstat_irqs on node -1 [ 0.554336] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X [ 0.554650] ERST: Table is not found! [ 0.556772] Linux agpgart interface v0.103 [ 0.556860] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.558846] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 0.567447] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.567483] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.567961] Uniform Multi-Platform E-IDE driver [ 0.568001] ide-gd driver 1.18 [ 0.568091] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.570128] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.571540] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.571551] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.571557] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.571562] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.571567] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.571676] mice: PS/2 mouse device common for all mice [ 0.571699] cpuidle: using governor ladder [ 0.571703] cpuidle: using governor menu [ 0.571708] No iBFT detected. [ 0.572065] TCP cubic registered [ 0.572258] NET: Registered protocol family 10 [ 0.572811] lo: Disabled Privacy Extensions [ 0.573128] Mobile IPv6 [ 0.573133] NET: Registered protocol family 17 [ 0.573781] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.573971] Freeing unused kernel memory: 548k freed [ 0.574139] Write protecting the kernel read-only data: 6144k [ 0.574469] Freeing unused kernel memory: 1304k freed [ 0.575088] Freeing unused kernel memory: 1000k freed [ 0.597329] udev: starting version 158 [ 0.604683] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.663307] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.663440] ACPI: Lid Switch [LID] [ 0.663522] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.663529] ACPI: Power Button [PWRB] [ 0.663609] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 0.663615] ACPI: Sleep Button [SLPB] [ 0.663692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 0.663698] ACPI: Power Button [PWRF] [ 0.798385] sky2: driver version 1.28 [ 0.798444] sky2 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.798468] sky2 0000:04:00.0: setting latency timer to 64 [ 0.798529] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 [ 0.798673] alloc irq_desc for 42 on node -1 [ 0.798676] alloc kstat_irqs on node -1 [ 0.798702] sky2 0000:04:00.0: irq 42 for MSI/MSI-X [ 0.846660] sky2 0000:04:00.0: eth0: addr 00:17:42:c3:b4:d1 [ 0.847957] usbcore: registered new interface driver usbfs [ 0.848136] usbcore: registered new interface driver hub [ 0.848878] SCSI subsystem initialized [ 0.863098] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.863112] ACPI: Thermal Zone [TZ00] (27 C) [ 0.863691] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.863703] ACPI: Thermal Zone [TZ01] (27 C) [ 0.869481] sdhci: Secure Digital Host Controller Interface driver [ 0.869485] sdhci: Copyright(c) Pierre Ossman [ 0.869666] usbcore: registered new device driver usb [ 0.874205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.874246] alloc irq_desc for 23 on node -1 [ 0.874250] alloc kstat_irqs on node -1 [ 0.874262] ehci_hcd 0000:00:1a.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 0.874308] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.874315] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.874330] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.874392] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.878297] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.878327] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc704000 [ 0.894830] sdhci-pci 0000:1c:03.2: SDHCI controller found [1217:7120] (rev 2) [ 0.894859] sdhci-pci 0000:1c:03.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.894906] mmc0: Unknown controller version (2). You may experience problems. [ 0.895043] Registered led device: mmc0:: [ 0.895089] mmc0: SDHCI controller on PCI [0000:1c:03.2] using PIO [ 0.902660] libata version 3.00 loaded. [ 0.923178] [drm] Initialized drm 1.1.0 20060810 [ 0.933172] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.933210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.933215] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.933220] usb usb1: Product: EHCI Host Controller [ 0.933223] usb usb1: Manufacturer: Linux 2.6.35-rc3+ ehci_hcd [ 0.933227] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.933494] hub 1-0:1.0: USB hub found [ 0.933503] hub 1-0:1.0: 4 ports detected [ 0.933635] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 0.933691] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.933699] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.933709] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.933765] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.937641] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.937652] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc704400 [ 0.959871] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.959917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.959922] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.959926] usb usb2: Product: EHCI Host Controller [ 0.959930] usb usb2: Manufacturer: Linux 2.6.35-rc3+ ehci_hcd [ 0.959933] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.960083] hub 2-0:1.0: USB hub found [ 0.960090] hub 2-0:1.0: 4 ports detected [ 0.960190] ata_piix 0000:00:1f.1: version 2.13 [ 0.960208] alloc irq_desc for 20 on node -1 [ 0.960212] alloc kstat_irqs on node -1 [ 0.960223] ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.960285] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.960515] scsi0 : ata_piix [ 0.960644] scsi1 : ata_piix [ 0.961763] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 0.961769] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 0.961812] ata_piix 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.961824] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.982506] uhci_hcd: USB Universal Host Controller Interface driver [ 1.130046] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.136014] scsi2 : ata_piix [ 1.136165] scsi3 : ata_piix [ 1.136851] ata3: SATA max UDMA/133 cmd 0x18e0 ctl 0x18d4 bmdma 0x18c0 irq 20 [ 1.136864] ata4: SATA max UDMA/133 cmd 0x18d8 ctl 0x18d0 bmdma 0x18c8 irq 20 [ 1.136910] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.136917] i915 0000:00:02.0: setting latency timer to 64 [ 1.160610] ata1.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.82, max UDMA/33 [ 1.208800] ata1.00: configured for UDMA/33 [ 1.209659] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 1.209665] [drm] MTRR allocation failed. Graphics performance may suffer. [ 1.209742] alloc irq_desc for 43 on node -1 [ 1.209746] alloc kstat_irqs on node -1 [ 1.209758] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 1.209773] [drm] set up 7M of stolen space [ 1.210390] modprobe:189 freeing invalid memtype fc080000-fc100000 [ 1.211380] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.82 PQ: 0 ANSI: 5 [ 1.260024] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.410432] usb 1-3: New USB device found, idVendor=0409, idProduct=005a [ 1.410437] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.411000] hub 1-3:1.0: USB hub found [ 1.411060] hub 1-3:1.0: 4 ports detected [ 1.548988] [drm] initialized overlay support [ 1.660019] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 1.998287] usb 2-4: New USB device found, idVendor=0ac8, idProduct=3343 [ 1.998293] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.998297] usb 2-4: Product: Sirius USB2.0 Camera [ 1.998301] usb 2-4: Manufacturer: Vimicro Corp. [ 2.000101] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.000123] ata3.01: SATA link down (SStatus 0 SControl 300) [ 2.061941] ata3.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 2.061947] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.093586] ata3.00: configured for UDMA/133 [ 2.093730] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5 [ 2.550017] ata4.01: failed to resume link (SControl 0) [ 2.563410] ata4.00: SATA link down (SStatus 0 SControl 300) [ 2.563440] ata4.01: SATA link down (SStatus 0 SControl 0) [ 2.583128] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.583133] Uniform CD-ROM driver Revision: 3.20 [ 2.583526] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.583765] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.583963] sd 2:0:0:0: [sda] Write Protect is off [ 2.583968] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.584002] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.584205] sda: sda1 sda2 sda3 < sda5 > [ 2.655966] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.665394] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.666094] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.807626] Console: switching to colour frame buffer device 160x50 [ 2.812627] fb0: inteldrmfb frame buffer device [ 2.812630] drm: registered panic notifier [ 2.812635] Slow work thread pool: Starting up [ 2.812687] Slow work thread pool: Ready [ 2.818002] acpi device:03: registered as cooling_device0 [ 2.818496] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 2.818506] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.818561] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.818603] alloc irq_desc for 22 on node -1 [ 2.818607] alloc kstat_irqs on node -1 [ 2.818617] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.818633] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.818639] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.818650] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.818714] uhci_hcd 0000:00:1a.0: irq 22, io base 0x00001820 [ 2.818783] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.818788] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.818792] usb usb3: Product: UHCI Host Controller [ 2.818796] usb usb3: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd [ 2.818799] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.818960] hub 3-0:1.0: USB hub found [ 2.818967] hub 3-0:1.0: 2 ports detected [ 2.819068] uhci_hcd 0000:00:1a.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.819083] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.819090] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.819098] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.819140] uhci_hcd 0000:00:1a.1: irq 22, io base 0x00001840 [ 2.819199] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.819204] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.819208] usb usb4: Product: UHCI Host Controller [ 2.819211] usb usb4: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd [ 2.819214] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.819348] hub 4-0:1.0: USB hub found [ 2.819355] hub 4-0:1.0: 2 ports detected [ 2.819446] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.819460] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.819467] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.819475] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.819524] uhci_hcd 0000:00:1d.0: irq 22, io base 0x00001860 [ 2.819578] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.819583] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.819587] usb usb5: Product: UHCI Host Controller [ 2.819590] usb usb5: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd [ 2.819594] usb usb5: SerialNumber: 0000:00:1d.0 [ 2.819729] hub 5-0:1.0: USB hub found [ 2.819736] hub 5-0:1.0: 2 ports detected [ 2.819824] uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.819837] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.819845] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.819853] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.819895] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001880 [ 2.819950] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.819954] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.819958] usb usb6: Product: UHCI Host Controller [ 2.819961] usb usb6: Manufacturer: Linux 2.6.35-rc3+ uhci_hcd [ 2.819965] usb usb6: SerialNumber: 0000:00:1d.1 [ 2.820119] hub 6-0:1.0: USB hub found [ 2.820126] hub 6-0:1.0: 2 ports detected [ 3.116354] PM: Starting manual resume from disk [ 3.140043] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 3.140146] EXT3-fs: barriers not enabled [ 3.142617] kjournald starting. Commit interval 5 seconds [ 3.142683] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 3.313509] usb 5-2: New USB device found, idVendor=08ff, idProduct=2580 [ 3.313515] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.313519] usb 5-2: Product: Fingerprint Sensor [ 5.491988] udev: starting version 158 [ 5.856411] ACPI: AC Adapter [AC] (on-line) [ 5.965563] cfg80211: Calling CRDA to update world regulatory domain [ 6.036465] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 6.049262] ACPI: Battery Slot [CMB1] (battery present) [ 6.237658] ACPI: acpi_idle registered with cpuidle [ 6.238019] Monitor-Mwait will be used to enter C-1 state [ 6.238059] Monitor-Mwait will be used to enter C-2 state [ 6.238488] Monitor-Mwait will be used to enter C-3 state [ 6.238501] Marking TSC unstable due to TSC halts in idle [ 6.239018] Switching to clocksource hpet [ 6.391605] alloc irq_desc for 21 on node -1 [ 6.391610] alloc kstat_irqs on node -1 [ 6.391622] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 6.564020] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/FUJ02B1:00/input/input7 [ 6.564155] ACPI: Fujitsu FUJ02B1 [FJEX] (on) [ 6.565155] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input8 [ 6.565452] ACPI: Fujitsu FUJ02E3 [FEXT] (on) [ 6.568052] yenta_cardbus 0000:1c:03.0: CardBus bridge found [10cf:143d] [ 6.568089] yenta_cardbus 0000:1c:03.0: O2: enabling read prefetch/write burst [ 6.569184] fujitsu-laptop: BTNI: [0xf0101] [ 6.570518] Registered led device: fujitsu::logolamp [ 6.570725] fujitsu-laptop: driver 0.6.0 successfully loaded. [ 6.691234] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 6.691239] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 6.691364] iwlagn 0000:14:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.691403] iwlagn 0000:14:00.0: setting latency timer to 64 [ 6.691504] iwlagn 0000:14:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 6.703955] yenta_cardbus 0000:1c:03.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 6.703961] yenta_cardbus 0000:1c:03.0: Socket status: 30000006 [ 6.703967] pci_bus 0000:1c: Raising subordinate bus# of parent bus (#1c) from #1d to #20 [ 6.703982] yenta_cardbus 0000:1c:03.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff] [ 6.703988] yenta_cardbus 0000:1c:03.0: pcmcia: parent PCI bridge window: [mem 0xfc400000-0xfc4fffff] [ 6.703993] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc400000-0xfc4fffff: excluding 0xfc400000-0xfc40ffff [ 6.704020] yenta_cardbus 0000:1c:03.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd3ffffff pref] [ 6.704025] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd3ffffff: excluding 0xd0000000-0xd3ffffff [ 6.730954] iwlagn 0000:14:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 6.731111] alloc irq_desc for 44 on node -1 [ 6.731115] alloc kstat_irqs on node -1 [ 6.731177] iwlagn 0000:14:00.0: irq 44 for MSI/MSI-X [ 6.731179] rtc_cmos 00:07: RTC can wake from S4 [ 6.731313] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 6.731363] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.756647] Linux video capture interface: v2.00 [ 6.913751] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa02000/0x0 [ 6.952432] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9 [ 7.032134] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:3343) [ 7.035637] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10 [ 7.035718] usbcore: registered new interface driver uvcvideo [ 7.035721] USB Video Class driver (v0.1.0) [ 7.061171] iwlagn 0000:14:00.0: loaded firmware version 228.61.2.24 [ 7.123235] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 7.226160] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 7.226179] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 7.226197] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 7.226346] alloc irq_desc for 45 on node -1 [ 7.226350] alloc kstat_irqs on node -1 [ 7.226375] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 7.226450] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.383483] hda_codec: ALC262: SKU not ready 0x90970130 [ 7.383707] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 9.519905] Adding 4803396k swap on /dev/sda5. Priority:-1 extents:1 across:4803396k [ 9.785143] EXT3-fs (sda2): using internal journal [ 9.924052] loop: module loaded [ 9.980410] device-mapper: uevent: version 1.0.3 [ 9.980685] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 12.098041] sky2 0000:04:00.0: eth0: enabling interface [ 12.098755] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.763027] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 13.763743] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.588718] tun: Universal TUN/TAP device driver, 1.6 [ 19.588723] tun: (C) 1999-2004 Max Krasnyansky [ 19.784183] Bridge firewalling registered [ 19.788704] device tap0 entered promiscuous mode [ 19.788744] br0: new device tap0 does not support netpoll (disabling) [ 19.795772] br0: port 1(tap0) entering forwarding state [ 19.795777] br0: port 1(tap0) entering forwarding state [ 21.056865] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.092104] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.092573] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 21.092578] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 21.092582] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.809498] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 22.925103] microcode: CPU0 sig=0x6fb, pf=0x80, revision=0xb6 [ 22.946859] microcode: CPU1 sig=0x6fb, pf=0x80, revision=0xb6 [ 22.952762] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 23.932559] eth0: no IPv6 routers present [ 30.040047] tap0: no IPv6 routers present [ 30.280086] br0: no IPv6 routers present [ 33.549946] RPC: Registered udp transport module. [ 33.549951] RPC: Registered tcp transport module. [ 33.549954] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 33.785862] FS-Cache: Loaded [ 34.038479] FS-Cache: Netfs 'nfs' registered for caching [ 34.294998] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 34.997606] Bluetooth: Core ver 2.15 [ 34.997650] NET: Registered protocol family 31 [ 34.997655] Bluetooth: HCI device and connection manager initialized [ 34.997661] Bluetooth: HCI socket layer initialized [ 35.040101] Bluetooth: L2CAP ver 2.14 [ 35.040105] Bluetooth: L2CAP socket layer initialized [ 35.064905] Bluetooth: RFCOMM TTY layer initialized [ 35.064912] Bluetooth: RFCOMM socket layer initialized [ 35.064916] Bluetooth: RFCOMM ver 1.11 [ 35.229369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.229373] Bluetooth: BNEP filters: protocol multicast [ 35.308031] Bluetooth: SCO (Voice Link) ver 0.6 [ 35.308035] Bluetooth: SCO socket layer initialized [ 36.420386] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 36.449495] NFSD: starting 90-second grace period [ 38.422364] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 530.771479] CE: hpet increased min_delta_ns to 7500 nsec [ 877.380297] kacpid:22 freeing invalid memtype cf6cb000-cf6cc000 [ 879.773987] PM: Syncing filesystems ... done. [ 880.550321] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 880.570074] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done. [ 880.592600] Suspending console(s) (use no_console_suspend to debug) [ 880.593468] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 880.593742] sd 2:0:0:0: [sda] Stopping disk [ 880.635812] ACPI handle has no context! [ 880.635951] ACPI handle has no context! [ 880.635964] sdhci-pci 0000:1c:03.2: PCI INT A disabled [ 880.635979] ACPI handle has no context! [ 880.636513] ata_piix 0000:00:1f.1: PCI INT A disabled [ 880.636590] ehci_hcd 0000:00:1d.7: PCI INT B disabled [ 880.636608] uhci_hcd 0000:00:1d.1: PCI INT A disabled [ 880.636622] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 880.637225] uhci_hcd 0000:00:1a.1: PCI INT A disabled [ 880.637239] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 880.637549] async/14:3642 freeing invalid memtype cf6cb000-cf6ce000 [ 880.732537] ehci_hcd 0000:00:1a.7: PCI INT B disabled [ 880.742612] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 880.760122] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 [ 880.927012] ata_piix 0000:00:1f.2: PCI INT A disabled [ 880.942547] PM: suspend of devices complete after 349.558 msecs [ 880.980205] PM: late suspend of devices complete after 37.652 msecs [ 880.980966] ACPI: Preparing to enter system sleep state S3 [ 880.981520] PM: Saving platform NVS memory [ 880.983481] Disabling non-boot CPUs ... [ 881.100053] CPU 1 is now offline [ 881.100058] SMP alternatives: switching to UP code [ 881.109850] Extended CMOS year: 2000 [ 881.109850] Back to C! [ 881.109850] PM: Restoring platform NVS memory [ 881.109850] Extended CMOS year: 2000 [ 881.109850] Enabling non-boot CPUs ... [ 881.110102] SMP alternatives: switching to SMP code [ 881.117918] Booting Node 0 Processor 1 APIC 0x1 [ 881.332521] CPU1 is up [ 881.333413] pm-suspend:3437 freeing invalid memtype cf6ca000-cf6cb000 [ 881.333421] pm-suspend:3437 freeing invalid memtype cf6cb000-cf6cc000 [ 881.333428] pm-suspend:3437 freeing invalid memtype cf6cc000-cf6cd000 [ 881.333437] ACPI: Waking up from system sleep state S3 [ 881.343026] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 881.343044] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 881.343081] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 881.343120] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 881.343161] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 881.343211] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 881.343271] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 881.343281] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 881.343321] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 881.343338] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd411d401) [ 881.343346] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) [ 881.343354] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 881.343368] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 881.343377] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 881.343436] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 881.343453] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd431d421) [ 881.343461] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) [ 881.343469] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 881.343483] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 881.343493] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 881.343562] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 881.343602] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 881.343651] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 881.343691] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd3f1d001) [ 881.343699] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc40fc40) [ 881.343707] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22804040) [ 881.343715] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x201d1c00, writing 0x20201c00) [ 881.343730] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) [ 881.343788] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) [ 881.343811] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 881.343842] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) [ 881.343863] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 881.343926] i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xd4400000) [ 881.343981] sky2 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 881.344014] sky2 0000:04:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 881.344027] sky2 0000:04:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) [ 881.344037] sky2 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 881.344050] sky2 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 881.344154] iwlagn 0000:14:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 881.344195] iwlagn 0000:14:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc300004) [ 881.344206] iwlagn 0000:14:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 881.344220] iwlagn 0000:14:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100106) [ 881.344304] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xf (was 0x400180, writing 0x5c0010b) [ 881.344313] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xe (was 0x1, writing 0x44fd) [ 881.344321] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xd (was 0x1, writing 0x4401) [ 881.344330] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xc (was 0x1, writing 0x40fd) [ 881.344338] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xb (was 0x1, writing 0x4001) [ 881.344347] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xa (was 0x0, writing 0xdbfff000) [ 881.344355] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x9 (was 0x0, writing 0xd8000000) [ 881.344364] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x8 (was 0x0, writing 0xd3fff000) [ 881.344373] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x7 (was 0x0, writing 0xd0000000) [ 881.344382] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0201d1c) [ 881.344393] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc401000) [ 881.344402] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800) [ 881.344413] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x1 (was 0x4100080, writing 0x4100087) [ 881.344448] yenta_cardbus 0000:1c:03.0: O2: enabling read prefetch/write burst [ 881.360026] sdhci-pci 0000:1c:03.2: BAR 0: set to [mem 0xfc400000-0xfc4000ff] (PCI address [0xfc400000-0xfc4000ff] [ 881.360043] sdhci-pci 0000:1c:03.2: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 881.360075] sdhci-pci 0000:1c:03.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010) [ 881.360086] sdhci-pci 0000:1c:03.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100106) [ 881.360537] PM: early resume of devices complete after 17.560 msecs [ 881.362306] i915 0000:00:02.0: setting latency timer to 64 [ 881.371896] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 881.371907] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 881.371938] usb usb3: root hub lost power or was reset [ 881.371965] uhci_hcd 0000:00:1a.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 881.371974] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 881.372002] usb usb4: root hub lost power or was reset [ 881.372027] ehci_hcd 0000:00:1a.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 881.372036] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 881.372265] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 881.372275] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 881.372303] usb usb5: root hub lost power or was reset [ 881.372331] uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 881.372340] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 881.372369] usb usb6: root hub lost power or was reset [ 881.372393] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 881.372402] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 881.372450] pci 0000:00:1e.0: setting latency timer to 64 [ 881.372465] ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 881.372473] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 881.372524] ata_piix 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 881.372532] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 881.373412] sdhci-pci 0000:1c:03.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 881.373485] sd 2:0:0:0: [sda] Starting disk [ 881.544555] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 881.544561] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 881.545623] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 881.582974] ata1.00: configured for UDMA/33 [ 881.770065] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [ 881.872632] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 881.872650] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 881.872664] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 881.872677] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 881.872687] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 881.872697] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 881.872757] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 882.040086] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [ 882.790055] ata4.01: failed to resume link (SControl 0) [ 882.801477] ata4.00: SATA link down (SStatus 4 SControl 300) [ 882.801500] ata4.01: SATA link down (SStatus 0 SControl 0) [ 883.010110] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 883.010130] ata3.01: SATA link down (SStatus 4 SControl 300) [ 883.030228] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 883.030233] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 883.030239] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 883.058886] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 883.070653] ata3.00: configured for UDMA/133 [ 883.952765] PM: resume of devices complete after 2592.157 msecs [ 883.953167] Restarting tasks ... done. [ 883.953556] video LNXVIDEO:00: Restoring backlight state [ 884.620460] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 885.920087] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 886.083446] usb 6-1: New USB device found, idVendor=1199, idProduct=6832 [ 886.083454] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 886.083461] usb 6-1: Product: Mini Card [ 886.083466] usb 6-1: Manufacturer: Sierra Wireless, Incorporated [ 1329.100089] PM: Syncing filesystems ... done. [ 1329.730357] Freezing user space processes ... (elapsed 0.02 seconds) done. [ 1329.752604] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1329.770155] Suspending console(s) (use no_console_suspend to debug) [ 1329.812807] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 1329.813041] sd 2:0:0:0: [sda] Stopping disk [ 1329.854867] ACPI handle has no context! [ 1329.855013] ACPI handle has no context! [ 1329.855027] sdhci-pci 0000:1c:03.2: PCI INT A disabled [ 1329.855041] ACPI handle has no context! [ 1329.855576] ata_piix 0000:00:1f.1: PCI INT A disabled [ 1329.855658] ehci_hcd 0000:00:1d.7: PCI INT B disabled [ 1329.855675] uhci_hcd 0000:00:1d.1: PCI INT A disabled [ 1329.855690] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 1329.856315] uhci_hcd 0000:00:1a.1: PCI INT A disabled [ 1329.856332] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 1329.856626] async/14:4319 freeing invalid memtype cf6cb000-cf6ce000 [ 1329.950037] ehci_hcd 0000:00:1a.7: PCI INT B disabled [ 1329.962613] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 1329.980123] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 [ 1330.129413] ata_piix 0000:00:1f.2: PCI INT A disabled [ 1330.140047] PM: suspend of devices complete after 369.476 msecs [ 1330.180208] PM: late suspend of devices complete after 40.152 msecs [ 1330.180970] ACPI: Preparing to enter system sleep state S3 [ 1330.181578] PM: Saving platform NVS memory [ 1330.184606] Disabling non-boot CPUs ... [ 1330.300052] CPU 1 is now offline [ 1330.300055] SMP alternatives: switching to UP code [ 1330.309795] Extended CMOS year: 2000 [ 1330.309795] Back to C! [ 1330.309795] PM: Restoring platform NVS memory [ 1330.309795] Extended CMOS year: 2000 [ 1330.309795] Enabling non-boot CPUs ... [ 1330.310044] SMP alternatives: switching to SMP code [ 1330.317861] Booting Node 0 Processor 1 APIC 0x1 [ 1330.532525] CPU1 is up [ 1330.533415] pm-suspend:4132 freeing invalid memtype cf6ca000-cf6cb000 [ 1330.533424] pm-suspend:4132 freeing invalid memtype cf6cb000-cf6cc000 [ 1330.533430] pm-suspend:4132 freeing invalid memtype cf6cc000-cf6cd000 [ 1330.533440] ACPI: Waking up from system sleep state S3 [ 1330.543025] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1330.543042] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 1330.543080] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 1330.543119] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1330.543160] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1330.543210] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 1330.543271] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 1330.543281] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 1330.543321] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 1330.543338] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd411d401) [ 1330.543346] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) [ 1330.543354] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20002020) [ 1330.543368] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 1330.543377] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1330.543437] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 1330.543454] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd431d421) [ 1330.543462] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) [ 1330.543470] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [ 1330.543483] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 1330.543493] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1330.543564] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1330.543603] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1330.543653] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 1330.543694] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd3f1d001) [ 1330.543702] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc40fc40) [ 1330.543710] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22804040) [ 1330.543718] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x201d1c00, writing 0x20201c00) [ 1330.543732] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) [ 1330.543790] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) [ 1330.543814] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 1330.543844] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) [ 1330.543866] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1330.543929] i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xd4400000) [ 1330.543985] sky2 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1330.544017] sky2 0000:04:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 1330.544030] sky2 0000:04:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) [ 1330.544040] sky2 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 1330.544053] sky2 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1330.544157] iwlagn 0000:14:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 1330.544198] iwlagn 0000:14:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc300004) [ 1330.544209] iwlagn 0000:14:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 1330.544222] iwlagn 0000:14:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506) [ 1330.544303] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xf (was 0x400180, writing 0x5c0010b) [ 1330.544312] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xe (was 0x1, writing 0x44fd) [ 1330.544321] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xd (was 0x1, writing 0x4401) [ 1330.544330] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xc (was 0x1, writing 0x40fd) [ 1330.544338] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xb (was 0x1, writing 0x4001) [ 1330.544347] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xa (was 0x0, writing 0xdbfff000) [ 1330.544356] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x9 (was 0x0, writing 0xd8000000) [ 1330.544364] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x8 (was 0x0, writing 0xd3fff000) [ 1330.544373] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x7 (was 0x0, writing 0xd0000000) [ 1330.544382] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0201d1c) [ 1330.544392] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc401000) [ 1330.544401] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800) [ 1330.544412] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x1 (was 0x4100080, writing 0x4100087) [ 1330.544447] yenta_cardbus 0000:1c:03.0: O2: enabling read prefetch/write burst [ 1330.560026] sdhci-pci 0000:1c:03.2: BAR 0: set to [mem 0xfc400000-0xfc4000ff] (PCI address [0xfc400000-0xfc4000ff] [ 1330.560042] sdhci-pci 0000:1c:03.2: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 1330.560075] sdhci-pci 0000:1c:03.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010) [ 1330.560085] sdhci-pci 0000:1c:03.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100106) [ 1330.560537] PM: early resume of devices complete after 17.562 msecs [ 1330.562318] i915 0000:00:02.0: setting latency timer to 64 [ 1330.572057] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1330.572068] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1330.572098] usb usb3: root hub lost power or was reset [ 1330.572124] uhci_hcd 0000:00:1a.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1330.572133] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1330.572162] usb usb4: root hub lost power or was reset [ 1330.572188] ehci_hcd 0000:00:1a.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 1330.572197] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1330.572425] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1330.572434] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1330.572463] usb usb5: root hub lost power or was reset [ 1330.572491] uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1330.572527] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1330.572533] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 1330.572542] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1330.572557] usb usb6: root hub lost power or was reset [ 1330.572571] pci 0000:00:1e.0: setting latency timer to 64 [ 1330.572588] ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1330.572594] ata_piix 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1330.572596] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1330.572602] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1330.572639] sdhci-pci 0000:1c:03.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1330.572711] sd 2:0:0:0: [sda] Starting disk [ 1330.753002] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1330.753008] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 1330.754071] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1330.792981] ata1.00: configured for UDMA/33 [ 1330.980042] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [ 1331.072639] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 1331.072657] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 1331.072671] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 1331.072684] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 1331.072694] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1331.072703] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1331.072763] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 1331.270177] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [ 1332.000041] ata4.01: failed to resume link (SControl 0) [ 1332.011460] ata4.00: SATA link down (SStatus 4 SControl 300) [ 1332.011483] ata4.01: SATA link down (SStatus 0 SControl 0) [ 1332.220124] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1332.220144] ata3.01: SATA link down (SStatus 4 SControl 300) [ 1332.240249] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1332.240256] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1332.240262] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1332.283005] ata3.00: configured for UDMA/133 [ 1332.430215] PM: resume of devices complete after 1869.607 msecs [ 1332.430519] Restarting tasks ... [ 1332.430583] usb 6-1: USB disconnect, address 2 [ 1332.430886] done. [ 1332.430891] video LNXVIDEO:00: Restoring backlight state [ 1332.442843] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 1332.932199] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1335.112581] usb 6-1: new full speed USB device using uhci_hcd and address 3 [ 1335.280370] usb 6-1: New USB device found, idVendor=1199, idProduct=6832 [ 1335.280375] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1335.280380] usb 6-1: Product: Mini Card [ 1335.280383] usb 6-1: Manufacturer: Sierra Wireless, Incorporated [ 1626.223555] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 7561.910971] PM: Syncing filesystems ... done. [ 7563.730369] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 7563.750102] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 7563.770111] Suspending console(s) (use no_console_suspend to debug) [ 7563.770946] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 7563.771171] sd 2:0:0:0: [sda] Stopping disk [ 7563.813345] ACPI handle has no context! [ 7563.813486] ACPI handle has no context! [ 7563.813502] sdhci-pci 0000:1c:03.2: PCI INT A disabled [ 7563.813516] ACPI handle has no context! [ 7563.813949] ehci_hcd 0000:00:1d.7: PCI INT B disabled [ 7563.813965] uhci_hcd 0000:00:1d.1: PCI INT A disabled [ 7563.813979] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 7563.814664] ata_piix 0000:00:1f.1: PCI INT A disabled [ 7563.814680] uhci_hcd 0000:00:1a.1: PCI INT A disabled [ 7563.814694] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 7563.922540] ehci_hcd 0000:00:1a.7: PCI INT B disabled [ 7563.922633] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 7563.940126] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 [ 7564.100647] ata_piix 0000:00:1f.2: PCI INT A disabled [ 7564.122561] PM: suspend of devices complete after 352.031 msecs [ 7564.160207] PM: late suspend of devices complete after 37.639 msecs [ 7564.160969] ACPI: Preparing to enter system sleep state S3 [ 7564.161508] PM: Saving platform NVS memory [ 7564.165382] Disabling non-boot CPUs ... [ 7564.280037] CPU 1 is now offline [ 7564.280041] SMP alternatives: switching to UP code [ 7564.289828] Extended CMOS year: 2000 [ 7564.289828] Back to C! [ 7564.289828] PM: Restoring platform NVS memory [ 7564.289828] Extended CMOS year: 2000 [ 7564.289828] Enabling non-boot CPUs ... [ 7564.290079] SMP alternatives: switching to SMP code [ 7564.297895] Booting Node 0 Processor 1 APIC 0x1 [ 7564.512521] CPU1 is up [ 7564.513427] ACPI: Waking up from system sleep state S3 [ 7564.523027] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7564.523044] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 7564.523081] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 7564.523120] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 7564.523161] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 7564.523210] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 7564.523270] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 7564.523279] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 7564.523320] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 7564.523337] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd411d401) [ 7564.523345] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20) [ 7564.523353] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 7564.523366] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 7564.523376] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 7564.523436] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 7564.523452] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd431d421) [ 7564.523461] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfc30fc30) [ 7564.523468] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 7564.523482] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 7564.523492] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 7564.523561] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 7564.523601] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 7564.523650] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 7564.523690] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd3f1d001) [ 7564.523698] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc40fc40) [ 7564.523706] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22804040) [ 7564.523714] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x201d1c00, writing 0x20201c00) [ 7564.523729] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) [ 7564.523787] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) [ 7564.523810] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 7564.523841] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) [ 7564.523862] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7564.523925] i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xd4400000) [ 7564.523981] sky2 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7564.524013] sky2 0000:04:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 7564.524026] sky2 0000:04:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc200004) [ 7564.524036] sky2 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 7564.524049] sky2 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 7564.524155] iwlagn 0000:14:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 7564.524197] iwlagn 0000:14:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfc300004) [ 7564.524207] iwlagn 0000:14:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 7564.524221] iwlagn 0000:14:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506) [ 7564.524303] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xf (was 0x400180, writing 0x5c0010b) [ 7564.524311] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xe (was 0x1, writing 0x44fd) [ 7564.524320] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xd (was 0x1, writing 0x4401) [ 7564.524328] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xc (was 0x1, writing 0x40fd) [ 7564.524337] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xb (was 0x1, writing 0x4001) [ 7564.524346] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0xa (was 0x0, writing 0xdbfff000) [ 7564.524355] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x9 (was 0x0, writing 0xd8000000) [ 7564.524364] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x8 (was 0x0, writing 0xd3fff000) [ 7564.524372] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x7 (was 0x0, writing 0xd0000000) [ 7564.524381] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0201d1c) [ 7564.524392] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc401000) [ 7564.524400] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800) [ 7564.524411] yenta_cardbus 0000:1c:03.0: restoring config space at offset 0x1 (was 0x4100080, writing 0x4100087) [ 7564.524446] yenta_cardbus 0000:1c:03.0: O2: enabling read prefetch/write burst [ 7564.540026] sdhci-pci 0000:1c:03.2: BAR 0: set to [mem 0xfc400000-0xfc4000ff] (PCI address [0xfc400000-0xfc4000ff] [ 7564.540043] sdhci-pci 0000:1c:03.2: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 7564.540075] sdhci-pci 0000:1c:03.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010) [ 7564.540086] sdhci-pci 0000:1c:03.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100106) [ 7564.540539] PM: early resume of devices complete after 17.562 msecs [ 7564.542329] i915 0000:00:02.0: setting latency timer to 64 [ 7564.552006] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7564.552017] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 7564.552048] usb usb3: root hub lost power or was reset [ 7564.552074] uhci_hcd 0000:00:1a.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7564.552083] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 7564.552111] usb usb4: root hub lost power or was reset [ 7564.552137] ehci_hcd 0000:00:1a.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 7564.552145] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 7564.552374] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7564.552383] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7564.552412] usb usb5: root hub lost power or was reset [ 7564.552439] uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7564.552447] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 7564.552476] usb usb6: root hub lost power or was reset [ 7564.552527] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 7564.552536] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 7564.552556] pci 0000:00:1e.0: setting latency timer to 64 [ 7564.552582] ata_piix 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7564.552588] ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7564.552593] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 7564.552596] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 7564.552643] sdhci-pci 0000:1c:03.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7564.553573] sd 2:0:0:0: [sda] Starting disk [ 7564.750054] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 7564.750060] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 7564.752209] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 7564.782954] ata1.00: configured for UDMA/33 [ 7564.952594] usb 5-2: reset full speed USB device using uhci_hcd and address 2 [ 7565.052632] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 7565.052649] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 7565.052663] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 7565.052676] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 7565.052686] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 7565.052695] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7565.052755] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 7565.240052] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [ 7565.972601] ata4.01: failed to resume link (SControl 0) [ 7565.983952] ata4.00: SATA link down (SStatus 4 SControl 300) [ 7565.983974] ata4.01: SATA link down (SStatus 0 SControl 0) [ 7566.192663] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7566.192683] ata3.01: SATA link down (SStatus 4 SControl 300) [ 7566.212769] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 7566.212775] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 7566.212781] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 7566.257351] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 7566.263728] ata3.00: configured for UDMA/133 [ 7566.410213] PM: resume of devices complete after 1869.608 msecs [ 7566.410540] Restarting tasks ... [ 7566.410612] usb 6-1: USB disconnect, address 3 [ 7566.422788] done. [ 7566.422795] video LNXVIDEO:00: Restoring backlight state [ 7566.883234] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7569.090059] usb 6-1: new full speed USB device using uhci_hcd and address 4 [ 7569.261400] usb 6-1: New USB device found, idVendor=1199, idProduct=6832 [ 7569.261407] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7569.261411] usb 6-1: Product: Mini Card [ 7569.261415] usb 6-1: Manufacturer: Sierra Wireless, Incorporated [19235.406757] NTFS driver 2.1.29 [Flags: R/W MODULE]. [19236.177978] fuse init (API version 7.14) [26154.823366] sky2 0000:04:00.0: eth0: Link is down [26154.970145] usb 1-3: USB disconnect, address 2 [26160.635150] Monitor-Mwait will be used to enter C-3 state [26160.642471] ACPI: \_SB_.REPL - undocking [26172.051756] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [26172.172673] usb 1-3: new high speed USB device using ehci_hcd and address 3 [26172.320906] usb 1-3: New USB device found, idVendor=0409, idProduct=005a [26172.320915] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [26172.322857] hub 1-3:1.0: USB hub found [26172.323059] hub 1-3:1.0: 4 ports detected [26173.664499] ACPI: \_SB_.REPL - docking [26175.893597] sky2 0000:04:00.0: eth0: Link is down [26175.893955] usb 1-3: USB disconnect, address 3 [26176.340087] usb 1-3: new high speed USB device using ehci_hcd and address 4 [26176.503042] usb 1-3: New USB device found, idVendor=0409, idProduct=005a [26176.503050] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [26176.503478] hub 1-3:1.0: USB hub found [26176.503658] hub 1-3:1.0: 4 ports detected [26177.674739] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both