Linux version 2.6.31-gentoo-r4 (root@yatahaze) (gcc version 4.4.2 (Gentoo 4.4.2 p1.0) ) #1 SMP PREEMPT Thu Nov 5 23:23:00 CET 2009 Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda1 rootfstype=ext4 doscsi KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable) BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data) BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS) BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) DMI present. last_pfn = 0x13c000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0C0000000 mask FC0000000 uncachable 1 base 13C000000 mask FFC000000 uncachable 2 base 000000000 mask F00000000 write-back 3 base 100000000 mask FC0000000 write-back 4 base 0BF700000 mask FFFF00000 uncachable 5 base 0BF800000 mask FFF800000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bf6b0000 0000000000 - 00bf600000 page 2M 00bf600000 - 00bf6b0000 page 4k kernel direct mapping tables up to bf6b0000 @ 8000-d000 init_memory_mapping: 0000000100000000-000000013c000000 0100000000 - 013c000000 page 2M kernel direct mapping tables up to 13c000000 @ b000-11000 RAMDISK: 37ebe000 - 37fef521 ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO) ACPI: XSDT 00000000bf6bb77f 00094 (v01 LENOVO TP-7L 00002170 LTP 00000000) ACPI: FACP 00000000bf6bb900 000F4 (v03 LENOVO TP-7L 00002170 LNVO 00000001) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 ACPI: DSDT 00000000bf6bbd1d 0FED1 (v01 LENOVO TP-7L 00002170 MSFT 03000000) ACPI: FACS 00000000bf6e4000 00040 ACPI: SSDT 00000000bf6bbab4 00269 (v01 LENOVO TP-7L 00002170 MSFT 03000000) ACPI: ECDT 00000000bf6cbbee 00052 (v01 LENOVO TP-7L 00002170 LNVO 00000001) ACPI: TCPA 00000000bf6cbc40 00032 (v02 LENOVO TP-7L 00002170 LNVO 00000001) ACPI: APIC 00000000bf6cbc72 00068 (v01 LENOVO TP-7L 00002170 LNVO 00000001) ACPI: MCFG 00000000bf6cbcda 0003C (v01 LENOVO TP-7L 00002170 LNVO 00000001) ACPI: HPET 00000000bf6cbd16 00038 (v01 LENOVO TP-7L 00002170 LNVO 00000001) ACPI: SLIC 00000000bf6cbdf0 00176 (v01 LENOVO TP-7L 00002170 LTP 00000000) ACPI: BOOT 00000000bf6cbf66 00028 (v01 LENOVO TP-7L 00002170 LTP 00000001) ACPI: ASF! 00000000bf6cbf8e 00072 (v16 LENOVO TP-7L 00002170 PTL 00000001) ACPI: SSDT 00000000bf6e26d9 0025F (v01 LENOVO TP-7L 00002170 INTL 20050513) ACPI: SSDT 00000000bf6e2938 000A6 (v01 LENOVO TP-7L 00002170 INTL 20050513) ACPI: SSDT 00000000bf6e29de 004F7 (v01 LENOVO TP-7L 00002170 INTL 20050513) ACPI: SSDT 00000000bf6e2ed5 001D8 (v01 LENOVO TP-7L 00002170 INTL 20050513) ACPI: DMI detected: Lenovo ThinkPad T61 ACPI: Added _OSI(Linux) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000013c000000 Bootmem setup node 0 0000000000000000-000000013c000000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000c000 - 00000000000337ff] pages 28 (8 early reservations) ==> bootmem [0000000000 - 013c000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00017a1c8c] TEXT DATA BSS ==> [0001000000 - 00017a1c8c] #3 [0037ebe000 - 0037fef521] RAMDISK ==> [0037ebe000 - 0037fef521] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #5 [00017a2000 - 00017a214c] BRK ==> [00017a2000 - 00017a214c] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] found SMP MP-table at [ffff8800000f6900] f6900 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0013c000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000bf6b0 0: 0x00100000 -> 0x0013c000 On node 0 totalpages: 1029709 DMA zone: 56 pages used for memmap DMA zone: 105 pages reserved DMA zone: 3836 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 765672 pages, LIFO batch:31 Normal zone: 3360 pages used for memmap Normal zone: 242400 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880028022000, static data 73184 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 1011908 Policy zone: Normal Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda1 rootfstype=ext4 doscsi PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 3986052k/5177344k available (4437k kernel code, 1058508k absent, 132784k reserved, 2260k data, 576k init) NR_IRQS:512 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1995.289 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.57 BogoMIPS (lpj=1995289) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.81 BogoMIPS (lpj=1994905) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: Measured 1165330 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (7980.38 BogoMIPS). NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query honored via DMI ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PUBS] (on) ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] pci 0000:15:00.0: supports D1 D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff] pci 0000:15:00.1: supports D1 D2 pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.1: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x7000-0xafff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff has been reserved system 00:00: iomem range 0xc4000-0xc7fff has been reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0xbfffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xdc000000-0xdf3fffff pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0x5000-0x5fff pci 0000:00:1c.3: MEM window: 0xd4000000-0xd5ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000df800000-0x000000df8fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.4: IO window: 0x6000-0x6fff pci 0000:00:1c.4: MEM window: 0xd0000000-0xd1ffffff pci 0000:00:1c.4: PREFETCH window: 0x000000df500000-0x000000df5fffff pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 pci 0000:15:00.0: IO window: 0x007000-0x0070ff pci 0000:15:00.0: IO window: 0x007400-0x0074ff pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1e.0: IO window: 0x7000-0xafff pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:15:00.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdf3fffff] pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff] pci_bus 0000:04: resource 2 pref mem [0xdfb00000-0xdfbfffff] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff] pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd5ffffff] pci_bus 0000:05: resource 2 pref mem [0xdf800000-0xdf8fffff] pci_bus 0000:0d: resource 0 io: [0x6000-0x6fff] pci_bus 0000:0d: resource 1 mem: [0xd0000000-0xd1ffffff] pci_bus 0000:0d: resource 2 pref mem [0xdf500000-0xdf5fffff] pci_bus 0000:15: resource 0 io: [0x7000-0xafff] pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff] pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff] pci_bus 0000:15: resource 3 io: [0x00-0xffff] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:16: resource 0 io: [0x7000-0x70ff] pci_bus 0000:16: resource 1 io: [0x7400-0x74ff] pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff] pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 1221k freed Simple Boot Flag at 0x35 set to 0x1 HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 7787 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 lp: driver loaded but no devices found ppdev: user-space parallel port driver Linux agpgart interface v0.103 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 ACPI: AC Adapter [AC] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] ACPI: SSDT 00000000bf6e1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) ACPI: SSDT 00000000bf6e1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 00000000bf6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) ACPI: SSDT 00000000bf6e1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (35 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (36 C) [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled ACPI: Battery Slot [BAT0] (battery absent) brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1c00-0x1c07 Probing IDE interface ide0... hda: DVD/CDRW UJDA775, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 29 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 29 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Fusion MPT base driver 3.04.10 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.10 usbcore: registered new interface driver usblp PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. registered taskstats version 1 rtc_cmos 00:07: setting system clock to 2009-11-13 20:56:59 UTC (1258145819) Clocksource tsc unstable (delta = -110538046 ns) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: Hitachi HTS723232L9A360, FC4OC30F, max UDMA/133 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72323 FC4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 576k freed Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci1394 0000:15:00.1: setting latency timer to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usb 6-2: new full speed USB device using uhci_hcd and address 2 usb 6-2: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a140815] IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input5 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int64x1 1773 MB/s raid6: int64x2 1902 MB/s raid6: int64x4 1652 MB/s raid6: int64x8 1230 MB/s raid6: sse2x1 3472 MB/s raid6: sse2x2 3746 MB/s raid6: sse2x4 6246 MB/s raid6: using algorithm sse2x4 (6246 MB/s) async_tx: api initialized (sync-only) xor: automatically using best checksumming function: generic_sse generic_sse: 7348.000 MB/sec xor: using function: generic_sse (7348.000 MB/sec) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 JFS: nTxBlock = 8192, nTxLock = 65536 fuse init (API version 7.12) Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). EXT4-fs (sda1): barriers enabled EXT4-fs (sda1): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda1): mounted filesystem with ordered data mode kjournald2 starting: pid 3498, dev sda1:8, commit interval 5 seconds udev: starting version 146 i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Non-volatile memory driver v1.3 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 30 for MSI/MSI-X yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: EU (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: EU thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \_SB.PCI0.LPC.EC for ec thinkpad_acpi: ibm_init: probing for driver thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7LETB7WW (2.17 ), EC 7KHT24WW-1.08 thinkpad_acpi: Lenovo ThinkPad T61, model 765912G thinkpad_acpi: ibm_init: driver installed thinkpad_acpi: ibm_init: probing for hotkey thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey thinkpad_acpi: ACPI backlight control delay disabled thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: hotkey_init: using Lenovo default hot key map thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \_SB.PCI0.VID for vid thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... thinkpad_acpi: hotkey_init: enabling firmware HKEY event interface... thinkpad_acpi: hotkey_init: legacy ibm/hotkey event reporting over procfs enabled thinkpad_acpi: register_tpacpi_subdriver: registering hotkey as an ACPI driver thinkpad_acpi: ibm_init: hotkey installed thinkpad_acpi: ibm_init: probing for bluetooth thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey thinkpad_acpi: ibm_init: bluetooth installed thinkpad_acpi: ibm_init: probing for wan thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey thinkpad_acpi: wan_init: wan hardware not installed thinkpad_acpi: ibm_init: probing for video thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \_SB.PCI0.VID for vid thinkpad_acpi: ibm_init: video installed thinkpad_acpi: ibm_init: probing for light thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \UCMS for cmos Registered led device: tpacpi::thinklight thinkpad_acpi: ibm_init: light installed thinkpad_acpi: ibm_init: probing for cmos thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \UCMS for cmos thinkpad_acpi: ibm_init: cmos installed thinkpad_acpi: ibm_init: probing for led thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle LED for led Registered led device: tpacpi::power Registered led device: tpacpi::standby Registered led device: tpacpi::thinkvantage thinkpad_acpi: ibm_init: led installed thinkpad_acpi: ibm_init: probing for beep thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle BEEP for beep thinkpad_acpi: ibm_init: beep installed thinkpad_acpi: ibm_init: probing for thermal thinkpad_acpi: ibm_init: thermal installed thinkpad_acpi: ibm_init: probing for brightness thinkpad_acpi: Backlight control force enabled, even if standard ACPI backlight interface is available thinkpad_acpi: detected a 16-level brightness capable ThinkPad thinkpad_acpi: ibm_init: brightness installed thinkpad_acpi: ibm_init: probing for volume thinkpad_acpi: ibm_init: volume installed thinkpad_acpi: ibm_init: probing for fan thinkpad_acpi: ibm_init: fan installed input: ThinkPad Extra Buttons as /devices/virtual/input/input6 yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:15:00.0: Socket status: 30000006 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:d0:65:a2 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [drm] MTRR allocation failed. Graphics performance may suffer. i915 0000:00:02.0: irq 31 for MSI/MSI-X iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' usb 3-1: new full speed USB device using uhci_hcd and address 3 usb 3-1: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.5 usbcore: registered new interface driver btusb [drm] LVDS-8: set mode 1280x800 c Console: switching to colour frame buffer device 160x50 [drm] fb0: inteldrmfb frame buffer device acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input7 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f0d00 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance vboxdrv: counter framework which can generate NMIs is active. You have to prevent vboxdrv: the usage of hardware performance counters by vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid vboxdrv: Found 2 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa0359ec0 vboxdrv: fAsync=1 offMin=0x11c272 offMax=0x11c272 vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001). VBoxNetFlt: dbg - g_abExecMemory=ffffffffa04f74a0 VBoxNetAdp: dbg - g_abExecMemory=ffffffffa050fc20 thinkpad_ec: thinkpad_ec 0.40 loaded. tp_smapi 0.40 loading... tp_smapi successfully loaded (smapi_port=0xb2). hdaps: LENOVO ThinkPad T61 detected, setting orientation 1 hdaps: initial mode latch is 0x05 hdaps: setting ec_rate=250, filter_order=2 hdaps: device successfully initialized. input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input9 input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input10 hdaps: driver successfully loaded. EXT4-fs (sda1): internal journal on sda1:8 EXT4-fs (dm-0): barriers enabled kjournald2 starting: pid 4374, dev dm-0:8, commit interval 5 seconds EXT4-fs (dm-0): internal journal on dm-0:8 EXT4-fs (dm-0): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-0): mounted filesystem with ordered data mode Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 hda: UDMA/33 mode selected Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast usb 3-1: USB disconnect, address 3 btusb_intr_complete: hci0 urb ffff88013a4f6740 failed to resubmit (19) btusb_bulk_complete: hci0 urb ffff88013a4f6800 failed to resubmit (19) btusb_bulk_complete: hci0 urb ffff88013a4f68c0 failed to resubmit (19) e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:0f:66:cb:73:33 wlan0: authenticated wlan0: associate with AP 00:0f:66:cb:73:33 wlan0: RX AssocResp from 00:0f:66:cb:73:33 (capab=0x431 status=0 aid=7) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CE: hpet increasing min_delta_ns to 15000 nsec CE: hpet increasing min_delta_ns to 22500 nsec hub 1-0:1.0: unable to enumerate USB device on port 3 usb 1-3: new high speed USB device using ehci_hcd and address 5 usb 1-3: configuration #1 chosen from 2 choices scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning scsi 3:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 usb-storage: device scan complete sd 3:0:0:0: [sdb] 29255991 4096-byte logical blocks: (119 GB/111 GiB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 68 00 00 08 sd 3:0:0:0: [sdb] Assuming drive cache: write through sd 3:0:0:0: [sdb] 29255991 4096-byte logical blocks: (119 GB/111 GiB) sd 3:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 3:0:0:0: [sdb] 29255991 4096-byte logical blocks: (119 GB/111 GiB) sd 3:0:0:0: [sdb] Assuming drive cache: write through sd 3:0:0:0: [sdb] Attached SCSI removable disk sdb: detected capacity change from 119832539136 to 0 usb 1-3: USB disconnect, address 5 process `skype' is using obsolete setsockopt SO_BSDCOMPAT integrated sync not supported [drm] DAC-6: set mode f integrated sync not supported integrated sync not supported integrated sync not supported integrated sync not supported integrated sync not supported