This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux lappy 2.6.31-8-default #1 SMP 2009-09-15 11:30:09 +0200 i686 Build Date: 17 September 2009 02:58:07AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 18 17:58:13 2009 (II) Loader magic: 0x640 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:3582:1028:018d rev 2, Mem @ 0xe8000000/134217728, 0xe0000000/524288, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:3582:1028:018d rev 2, Mem @ 0xf0000000/134217728, 0xe0080000/524288 (==) Using default built-in configuration (39 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default i810 Device 0" Driver "i810" EndSection Section "Screen" Identifier "Builtin Default i810 Screen 0" Device "Builtin Default i810 Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default i810 Screen 0" Screen "Builtin Default fbdev Screen 0" Screen "Builtin Default vesa Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default i810 Screen 0" (1) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default i810 Device 0" (==) No monitor specified for screen "Builtin Default i810 Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (2) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (3) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/truetype/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, built-ins (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules//extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules//extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules//extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules//extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules//extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules//extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules//drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.8.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "i810" (WW) Warning, couldn't open module i810 (II) UnloadModule: "i810" (EE) Failed to load module "i810" (module does not exist, 0) (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules//drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.4.1 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules//drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D, IGDNG_M (II) FBDEV: driver for framebuffer: fbdev (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.0.2 ABI class: X.Org Video Driver, version 5.0 (WW) Falling back to old probe method for vesa (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 855GME (--) intel(0): Chipset: "852GM/855GM" (--) intel(0): Linear framebuffer at 0xE8000000 (--) intel(0): IO registers at addr 0xE0000000 size 524288 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): No SDVO device is found in VBT (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "AUO", prod id 3074 (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0 (II) intel(0): I2C bus "DVODDC_D" initialized. (II) Loading sub module "sil164" (II) LoadModule: "sil164" (II) Loading /usr/lib/xorg/modules//drivers/sil164.so (II) Module sil164: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ch7xxx" (II) LoadModule: "ch7xxx" (II) Loading /usr/lib/xorg/modules//drivers/ch7xxx.so (II) Module ch7xxx: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) intel(0): Detected CH7009A chipset, vendor/device ID 0x84/0x17 (II) intel(0): I2C device "DVOI2C_E:CH7xxx TMDS Controller" registered at address 0xEC. (II) intel(0): Output TMDS has no monitor section (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "AUO", prod id 3074 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TMDS disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): detected 128 kB GTT. (II) intel(0): detected 16252 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules//drivers/fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules//drivers/vesa_drv.so (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 481024 total, 1 used (II) intel(0): I830CheckAvailableMemory: 1924092 kB available (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 131072 KB (II) intel(0): Attempting memory allocation with tiled buffers. (WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed (Cannot allocate memory) (WW) intel(0): Allocation error, framebuffer compression disabled (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed (Cannot allocate memory) (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x079f4000 (pgoffset 31220) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x079f5000 (pgoffset 31221) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x079f9000 (pgoffset 31225) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x079fa000 (pgoffset 31226) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x079fe000 (pgoffset 31230) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00fdf000: end of stolen memory (II) intel(0): 0x00fdf000-0x079f3fff: DRI memory manager (108628 kB) (II) intel(0): 0x079f4000-0x079f4fff: Core cursor (4 kB, 0x000000003648b000 physical ) (II) intel(0): 0x079f5000-0x079f8fff: ARGB cursor (16 kB, 0x0000000034d2c000 physical ) (II) intel(0): 0x079f9000-0x079f9fff: Core cursor (4 kB, 0x0000000034d94000 physical ) (II) intel(0): 0x079fa000-0x079fdfff: ARGB cursor (16 kB, 0x0000000034e90000 physical ) (II) intel(0): 0x079fe000-0x079fefff: overlay registers (4 kB, 0x0000000034e5a000 physical ) (II) intel(0): 0x08000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x00fdf000: start of memory manager (II) intel(0): 0x01000000-0x017fffff: front buffer (8192 kB) X tiled (II) intel(0): 0x079f4000: end of memory manager (II) intel(0): using SSC reference clock of 66 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane B is now disabled and connected to pipe A. (WW) intel(0): Hardware claims pipe A is on while software believes it is off (II) intel(0): Pipe B is on (II) intel(0): Display plane A is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 261 x 163 (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules//input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules//input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) Synaptics touchpad driver version 1.1.3 (**) Option "Device" "/dev/input/event1" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple (**) Option "SHMConfig" "on" (**) Option "HorizScrollDelta" "0" (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/hal: Adding input device Logitech USB Gaming Mouse (**) Logitech USB Gaming Mouse: always reports core events (**) Logitech USB Gaming Mouse: Device: "/dev/input/event2" (II) Logitech USB Gaming Mouse: Found 20 mouse buttons (II) Logitech USB Gaming Mouse: Found x and y relative axes (II) Logitech USB Gaming Mouse: Found scroll wheel(s) (II) Logitech USB Gaming Mouse: Configuring as mouse (**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE) (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB Gaming Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB Gaming Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB Gaming Mouse: (accel) set acceleration profile 0 (II) Logitech USB Gaming Mouse: initialized for relative axes. (II) config/hal: Adding input device Sleep Button (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event5" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event7" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "AUO", prod id 3074 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 75.00 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (53.3 kHz) (II) intel(0): EDID vendor "AUO", prod id 3074 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "AUO", prod id 3074 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 75.00 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (53.3 kHz) (II) intel(0): EDID vendor "AUO", prod id 3074 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "AUO", prod id 3074 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 75.00 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (53.3 kHz) (II) intel(0): EDID vendor "AUO", prod id 3074 (EE) Trying to set already set cursor. (EE) Trying to set already set cursor. (EE) Trying to set already set cursor. (EE) Trying to set already set cursor.