[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-8-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-3ubuntu1) ) #28-Ubuntu SMP Thu Aug 27 14:42:57 UTC 2009 (Ubuntu 2.6.31-8.28-generic) [ 0.000000] Command line: root=UUID=72c40d5f-31c8-4ab1-886d-8b266543b5c6 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdcb0000 (usable) [ 0.000000] BIOS-e820: 00000000bdcb0000 - 00000000bdce3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdce3000 - 00000000bdcf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdcf0000 - 00000000bdd00000 (reserved) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 4 base 100000000 mask F00000000 write-back [ 0.000000] 5 base 200000000 mask FC0000000 write-back [ 0.000000] 6 base 0BDD00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] e820 update range: 00000000bdd00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbdcb0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bdcb0000 (usable) [ 0.000000] modified: 00000000bdcb0000 - 00000000bdce3000 (ACPI NVS) [ 0.000000] modified: 00000000bdce3000 - 00000000bdcf0000 (ACPI data) [ 0.000000] modified: 00000000bdcf0000 - 00000000bdd00000 (reserved) [ 0.000000] modified: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bdcb0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00bdc00000 page 2M [ 0.000000] 00bdc00000 - 00bdcb0000 page 4k [ 0.000000] kernel direct mapping tables up to bdcb0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ b000-15000 [ 0.000000] RAMDISK: 378f1000 - 37feff0b [ 0.000000] ACPI: RSDP 00000000000f7490 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000bdce3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000bdce30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000bdce3180 047ED (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000bdcb0000 00040 [ 0.000000] ACPI: HPET 00000000bdce7ac0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000bdce7b40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000bdce79c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000bdce8520 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000014fff] [ 0.000000] bootmap [0000000000015000 - 000000000005cfff] pages 48 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0240000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019b298c] TEXT DATA BSS ==> [0001000000 - 00019b298c] [ 0.000000] #3 [00378f1000 - 0037feff0b] RAMDISK ==> [00378f1000 - 0037feff0b] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019b3000 - 00019b30f6] BRK ==> [00019b3000 - 00019b30f6] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000] [ 0.000000] found SMP MP-table at [ffff8800000f5660] f5660 [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bdcb0 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2088010 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3831 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 759016 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bdcb0000 - 00000000bdce3000 [ 0.000000] PM: Registered nosave memory: 00000000bdce3000 - 00000000bdcf0000 [ 0.000000] PM: Registered nosave memory: 00000000bdcf0000 - 00000000bdd00000 [ 0.000000] PM: Registered nosave memory: 00000000bdd00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff880028034000, static data 89952 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055647 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=72c40d5f-31c8-4ab1-886d-8b266543b5c6 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 8153500k/9437184k available (5278k kernel code, 1085144k absent, 198540k reserved, 2979k data, 656k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2832.961 MHz processor. [ 0.001011] Console: colour VGA+ 80x25 [ 0.001013] console [tty0] enabled [ 0.004000] allocated 83886080 bytes of page_cgroup [ 0.004000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5665.92 BogoMIPS (lpj=11331844) [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005292] Mount-cache hash table entries: 256 [ 0.005410] Initializing cgroup subsys ns [ 0.005415] Initializing cgroup subsys cpuacct [ 0.005417] Initializing cgroup subsys memory [ 0.005423] Initializing cgroup subsys freezer [ 0.005425] Initializing cgroup subsys net_cls [ 0.005437] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.005438] CPU: L2 cache: 6144K [ 0.005441] CPU 0/0x0 -> Node 0 [ 0.005443] CPU: Physical Processor ID: 0 [ 0.005444] CPU: Processor Core ID: 0 [ 0.005446] using mwait in idle threads. [ 0.005447] Performance Counters: Core2 events, Intel PMU driver. [ 0.005452] ... version: 2 [ 0.005453] ... bit width: 40 [ 0.005454] ... generic counters: 2 [ 0.005455] ... value mask: 000000ffffffffff [ 0.005456] ... max period: 000000007fffffff [ 0.005457] ... fixed-purpose counters: 3 [ 0.005458] ... counter mask: 0000000700000003 [ 0.007463] ACPI: Core revision 20090521 [ 0.015232] Setting APIC routing to flat [ 0.015533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.055221] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 [ 0.056001] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5665.98 BogoMIPS (lpj=11331975) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 1/0x2 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.140736] CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 [ 0.140743] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.144061] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5666.00 BogoMIPS (lpj=11332007) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 2/0x3 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.232740] CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 [ 0.232745] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.236064] Booting processor 3 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5665.95 BogoMIPS (lpj=11331912) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU 3/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.324745] CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 [ 0.324751] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.328030] Brought up 4 CPUs [ 0.328032] Total of 4 processors activated (22663.86 BogoMIPS). [ 0.328081] CPU0 attaching sched-domain: [ 0.328083] domain 0: span 0,3 level MC [ 0.328085] groups: 0 3 [ 0.328088] domain 1: span 0-3 level CPU [ 0.328090] groups: 0,3 1-2 [ 0.328093] CPU1 attaching sched-domain: [ 0.328095] domain 0: span 1-2 level MC [ 0.328096] groups: 1 2 [ 0.328099] domain 1: span 0-3 level CPU [ 0.328100] groups: 1-2 0,3 [ 0.328103] CPU2 attaching sched-domain: [ 0.328104] domain 0: span 1-2 level MC [ 0.328106] groups: 2 1 [ 0.328108] domain 1: span 0-3 level CPU [ 0.328110] groups: 1-2 0,3 [ 0.328113] CPU3 attaching sched-domain: [ 0.328114] domain 0: span 0,3 level MC [ 0.328116] groups: 3 0 [ 0.328118] domain 1: span 0-3 level CPU [ 0.328120] groups: 0,3 1-2 [ 0.328289] Booting paravirtualized kernel on bare hardware [ 0.328289] regulator: core version 0.5 [ 0.328289] Time: 10:18:10 Date: 08/29/09 [ 0.328289] NET: Registered protocol family 16 [ 0.328289] ACPI: bus type pci registered [ 0.328289] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255 [ 0.328289] PCI: MCFG area at c0000000 reserved in E820 [ 0.332194] PCI: Using MMCONFIG at c0000000 - cfffffff [ 0.332195] PCI: Using configuration type 1 for base access [ 0.336032] bio: create slab at 0 [ 0.338077] ACPI: EC: Look up EC in DSDT [ 0.344350] ACPI: Interpreter enabled [ 0.344354] ACPI: (supports S0 S3 S4 S5) [ 0.344376] ACPI: Using IOAPIC for interrupt routing [ 0.348118] ACPI: No dock devices found. [ 0.348199] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.348228] pci 0000:00:02.0: reg 10 64bit mmio: [0xe1000000-0xe13fffff] [ 0.348228] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.348228] pci 0000:00:02.0: reg 20 io port: [0xe200-0xe207] [ 0.348228] pci 0000:00:02.1: reg 10 64bit mmio: [0xe1400000-0xe14fffff] [ 0.348228] pci 0000:00:1a.0: reg 20 io port: [0xe600-0xe61f] [ 0.348228] pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f] [ 0.348268] pci 0000:00:1a.2: reg 20 io port: [0xe100-0xe11f] [ 0.348316] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe1604000-0xe16043ff] [ 0.348379] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe1600000-0xe1603fff] [ 0.348412] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.348415] pci 0000:00:1b.0: PME# disabled [ 0.348460] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.348463] pci 0000:00:1c.0: PME# disabled [ 0.348511] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.348514] pci 0000:00:1c.5: PME# disabled [ 0.348557] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f] [ 0.348612] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f] [ 0.348666] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f] [ 0.348713] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe1605000-0xe16053ff] [ 0.348842] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.348845] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.348848] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.348851] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.348853] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b) [ 0.348895] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.348899] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.348904] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.348908] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.348912] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.348917] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f] [ 0.348952] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe1606000-0xe16060ff] [ 0.348963] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.348998] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe807] [ 0.349002] pci 0000:00:1f.5: reg 14 io port: [0xe900-0xe903] [ 0.349006] pci 0000:00:1f.5: reg 18 io port: [0xea00-0xea07] [ 0.349011] pci 0000:00:1f.5: reg 1c io port: [0xeb00-0xeb03] [ 0.349015] pci 0000:00:1f.5: reg 20 io port: [0xec00-0xec0f] [ 0.349019] pci 0000:00:1f.5: reg 24 io port: [0xed00-0xed0f] [ 0.349115] pci 0000:02:00.0: reg 10 io port: [0xc000-0xc0ff] [ 0.349132] pci 0000:02:00.0: reg 18 64bit mmio: [0xe1510000-0xe1510fff] [ 0.349144] pci 0000:02:00.0: reg 20 64bit mmio: [0xe1500000-0xe150ffff] [ 0.349151] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.349185] pci 0000:02:00.0: supports D1 D2 [ 0.349186] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.349190] pci 0000:02:00.0: PME# disabled [ 0.349238] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff] [ 0.349241] pci 0000:00:1c.5: bridge 32bit mmio: [0xe0000000-0xe0ffffff] [ 0.349245] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xe1500000-0xe15fffff] [ 0.349277] pci 0000:03:05.0: reg 10 io port: [0xd000-0xd007] [ 0.349282] pci 0000:03:05.0: reg 14 io port: [0xd100-0xd103] [ 0.349287] pci 0000:03:05.0: reg 18 io port: [0xd200-0xd207] [ 0.349293] pci 0000:03:05.0: reg 1c io port: [0xd300-0xd303] [ 0.349298] pci 0000:03:05.0: reg 20 io port: [0xd400-0xd40f] [ 0.349353] pci 0000:00:1e.0: transparent bridge [ 0.349356] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.349373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.349493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.349539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.349576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.360620] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.360620] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.360620] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.360620] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.360620] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.364036] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.364108] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.364180] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.364221] SCSI subsystem initialized [ 0.364221] libata version 3.00 loaded. [ 0.364221] usbcore: registered new interface driver usbfs [ 0.364221] usbcore: registered new interface driver hub [ 0.364221] usbcore: registered new device driver usb [ 0.364221] ACPI: WMI: Mapper loaded [ 0.364221] PCI: Using ACPI for IRQ routing [ 0.384008] Bluetooth: Core ver 2.15 [ 0.384027] NET: Registered protocol family 31 [ 0.384027] Bluetooth: HCI device and connection manager initialized [ 0.384027] Bluetooth: HCI socket layer initialized [ 0.384027] NetLabel: Initializing [ 0.384027] NetLabel: domain hash size = 128 [ 0.384027] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.384027] NetLabel: unlabeled traffic allowed by default [ 0.384040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.384044] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.416009] pnp: PnP ACPI init [ 0.416018] ACPI: bus type pnp registered [ 0.418258] pnp: PnP ACPI: found 11 devices [ 0.418260] ACPI: ACPI bus type pnp unregistered [ 0.418267] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.418269] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.418271] system 00:01: ioport range 0x800-0x805 has been reserved [ 0.418273] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.418275] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.418280] system 00:07: ioport range 0x400-0x4bf could not be reserved [ 0.418284] system 00:08: iomem range 0xc0000000-0xcfffffff has been reserved [ 0.418288] system 00:09: iomem range 0xcc400-0xcffff has been reserved [ 0.418290] system 00:09: iomem range 0xf0000-0xf7fff could not be reserved [ 0.418292] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 0.418293] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 0.418295] system 00:09: iomem range 0xbdcb0000-0xbdcfffff could not be reserved [ 0.418298] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.418300] system 00:09: iomem range 0x100000-0xbdcaffff could not be reserved [ 0.418302] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.418304] system 00:09: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.418306] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.418308] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.418310] system 00:09: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.418312] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved [ 0.418314] system 00:09: iomem range 0xe0000-0xeffff has been reserved [ 0.423622] AppArmor: AppArmor Filesystem Enabled [ 0.423651] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.423652] pci 0000:00:1c.0: IO window: disabled [ 0.423655] pci 0000:00:1c.0: MEM window: disabled [ 0.423658] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.423662] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.423664] pci 0000:00:1c.5: IO window: 0xc000-0xcfff [ 0.423668] pci 0000:00:1c.5: MEM window: 0xe0000000-0xe0ffffff [ 0.423671] pci 0000:00:1c.5: PREFETCH window: 0x000000e1500000-0x000000e15fffff [ 0.423676] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.423678] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.423682] pci 0000:00:1e.0: MEM window: disabled [ 0.423684] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.423692] alloc irq_desc for 16 on node 0 [ 0.423694] alloc kstat_irqs on node 0 [ 0.423697] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.423700] pci 0000:00:1c.0: setting latency timer to 64 [ 0.423705] alloc irq_desc for 17 on node 0 [ 0.423706] alloc kstat_irqs on node 0 [ 0.423709] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.423712] pci 0000:00:1c.5: setting latency timer to 64 [ 0.423716] pci 0000:00:1e.0: setting latency timer to 64 [ 0.423719] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.423721] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.423723] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.423724] pci_bus 0000:02: resource 1 mem: [0xe0000000-0xe0ffffff] [ 0.423726] pci_bus 0000:02: resource 2 pref mem [0xe1500000-0xe15fffff] [ 0.423728] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.423729] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.423731] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.423753] NET: Registered protocol family 2 [ 0.423931] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.424834] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.427357] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.427731] TCP: Hash tables configured (established 524288 bind 65536) [ 0.427733] TCP reno registered [ 0.427833] NET: Registered protocol family 1 [ 0.427886] Trying to unpack rootfs image as initramfs... [ 0.500798] Switched to high resolution mode on CPU 1 [ 0.500807] Switched to high resolution mode on CPU 3 [ 0.500812] Switched to high resolution mode on CPU 2 [ 0.504009] Switched to high resolution mode on CPU 0 [ 0.549120] Freeing initrd memory: 7163k freed [ 0.552273] Scanning for low memory corruption every 60 seconds [ 0.552612] audit: initializing netlink socket (disabled) [ 0.552625] type=2000 audit(1251541090.549:1): initialized [ 0.560062] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.563420] VFS: Disk quotas dquot_6.5.2 [ 0.563507] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.564926] fuse init (API version 7.12) [ 0.565168] msgmni has been set to 15938 [ 0.565600] alg: No test for stdrng (krng) [ 0.565615] io scheduler noop registered [ 0.565622] io scheduler anticipatory registered [ 0.565623] io scheduler deadline registered [ 0.565708] io scheduler cfq registered (default) [ 0.565718] pci 0000:00:02.0: Boot video device [ 0.566003] alloc irq_desc for 24 on node 0 [ 0.566005] alloc kstat_irqs on node 0 [ 0.566014] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.566020] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.566330] alloc irq_desc for 25 on node 0 [ 0.566332] alloc kstat_irqs on node 0 [ 0.566337] pcieport-driver 0000:00:1c.5: irq 25 for MSI/MSI-X [ 0.566343] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.566714] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.566957] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.567414] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.567418] ACPI: Power Button [PWRF] [ 0.567510] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.567515] ACPI: Power Button [PWRB] [ 0.568004] ACPI: SSDT 00000000bdce7c40 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.568124] Marking TSC unstable due to TSC halts in idle [ 0.568185] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.568245] processor LNXCPU:00: registered as cooling_device0 [ 0.568248] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.568401] ACPI: SSDT 00000000bdce8100 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.568594] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.568638] processor LNXCPU:01: registered as cooling_device1 [ 0.568642] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.568838] ACPI: SSDT 00000000bdce8260 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.568995] ACPI: CPU2 (power states: C1[C1] C2[C2]) [ 0.569052] processor LNXCPU:02: registered as cooling_device2 [ 0.569055] ACPI: Processor [CPU2] (supports 8 throttling states) [ 0.569216] ACPI: SSDT 00000000bdce83c0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.569430] ACPI: CPU3 (power states: C1[C1] C2[C2]) [ 0.569521] processor LNXCPU:03: registered as cooling_device3 [ 0.569524] ACPI: Processor [CPU3] (supports 8 throttling states) [ 0.575746] Linux agpgart interface v0.103 [ 0.575750] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.578854] brd: module loaded [ 0.580222] loop: module loaded [ 0.580465] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.580974] ata_piix 0000:00:1f.2: version 2.13 [ 0.580984] alloc irq_desc for 19 on node 0 [ 0.580985] alloc kstat_irqs on node 0 [ 0.580989] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.580993] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.581030] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.581112] scsi0 : ata_piix [ 0.581336] scsi1 : ata_piix [ 0.581951] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.581955] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.582002] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.582011] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.582051] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.582111] scsi2 : ata_piix [ 0.582309] scsi3 : ata_piix [ 0.582822] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19 [ 0.582825] ata4: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19 [ 0.586049] alloc irq_desc for 21 on node 0 [ 0.586050] alloc kstat_irqs on node 0 [ 0.586053] pata_acpi 0000:03:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.586070] pata_acpi 0000:03:05.0: setting latency timer to 64 [ 0.586079] pata_acpi 0000:03:05.0: PCI INT A disabled [ 0.586401] Fixed MDIO Bus: probed [ 0.586405] PPP generic driver version 2.4.2 [ 0.586722] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.586751] alloc irq_desc for 18 on node 0 [ 0.586752] alloc kstat_irqs on node 0 [ 0.586755] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.586762] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.586765] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.586856] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.590758] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.590767] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe1604000 [ 0.608009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.608116] usb usb1: configuration #1 chosen from 1 choice [ 0.608202] hub 1-0:1.0: USB hub found [ 0.608208] hub 1-0:1.0: 6 ports detected [ 0.608293] alloc irq_desc for 23 on node 0 [ 0.608295] alloc kstat_irqs on node 0 [ 0.608298] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.608304] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.608306] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.608390] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.612276] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.612285] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1605000 [ 0.628008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.628099] usb usb2: configuration #1 chosen from 1 choice [ 0.628165] hub 2-0:1.0: USB hub found [ 0.628174] hub 2-0:1.0: 6 ports detected [ 0.628285] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.628361] uhci_hcd: USB Universal Host Controller Interface driver [ 0.628501] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.628511] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.628519] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.628610] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.628635] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e600 [ 0.628755] usb usb3: configuration #1 chosen from 1 choice [ 0.628837] hub 3-0:1.0: USB hub found [ 0.628842] hub 3-0:1.0: 2 ports detected [ 0.628917] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.628921] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.628923] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.629009] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.629038] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000 [ 0.629152] usb usb4: configuration #1 chosen from 1 choice [ 0.629234] hub 4-0:1.0: USB hub found [ 0.629239] hub 4-0:1.0: 2 ports detected [ 0.629313] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.629317] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.629319] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.629406] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.629425] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100 [ 0.629550] usb usb5: configuration #1 chosen from 1 choice [ 0.629619] hub 5-0:1.0: USB hub found [ 0.629623] hub 5-0:1.0: 2 ports detected [ 0.629700] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.629704] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.629707] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.629773] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.629792] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 0.629891] usb usb6: configuration #1 chosen from 1 choice [ 0.629954] hub 6-0:1.0: USB hub found [ 0.629960] hub 6-0:1.0: 2 ports detected [ 0.630038] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.630042] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.630044] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.630110] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.630129] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 0.630229] usb usb7: configuration #1 chosen from 1 choice [ 0.630293] hub 7-0:1.0: USB hub found [ 0.630301] hub 7-0:1.0: 2 ports detected [ 0.630377] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.630381] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.630384] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.630453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.630472] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 0.630571] usb usb8: configuration #1 chosen from 1 choice [ 0.630638] hub 8-0:1.0: USB hub found [ 0.630642] hub 8-0:1.0: 2 ports detected [ 0.630943] PNP: No PS/2 controller found. Probing ports directly. [ 0.631321] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.631327] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.631517] mice: PS/2 mouse device common for all mice [ 0.631674] rtc_cmos 00:04: RTC can wake from S4 [ 0.631724] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.631744] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.631882] device-mapper: uevent: version 1.0.3 [ 0.632002] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.632133] device-mapper: multipath: version 1.1.0 loaded [ 0.632135] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.632551] cpuidle: using governor ladder [ 0.632941] cpuidle: using governor menu [ 0.633314] TCP cubic registered [ 0.633487] NET: Registered protocol family 10 [ 0.633812] lo: Disabled Privacy Extensions [ 0.634007] NET: Registered protocol family 17 [ 0.634044] Bluetooth: L2CAP ver 2.13 [ 0.634045] Bluetooth: L2CAP socket layer initialized [ 0.634047] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.634048] Bluetooth: SCO socket layer initialized [ 0.634069] Bluetooth: RFCOMM TTY layer initialized [ 0.634071] Bluetooth: RFCOMM socket layer initialized [ 0.634072] Bluetooth: RFCOMM ver 1.11 [ 0.639415] PM: Resume from disk failed. [ 0.639428] registered taskstats version 1 [ 0.639526] Magic number: 5:522:326 [ 0.639608] rtc_cmos 00:04: setting system clock to 2009-08-29 10:18:11 UTC (1251541091) [ 0.639615] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.639616] EDD information not available. [ 0.910568] ata4: SATA link down (SStatus 0 SControl 300) [ 0.921144] ata3: SATA link down (SStatus 0 SControl 300) [ 1.216014] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 1.385164] usb 4-1: configuration #1 chosen from 1 choice [ 1.392104] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.392116] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.402764] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.402774] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.402918] hub 4-1:1.0: USB hub found [ 1.404067] hub 4-1:1.0: 3 ports detected [ 1.412186] ata2.01: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL02, max UDMA/133 [ 1.424189] ata2.01: configured for UDMA/133 [ 1.425176] ata1.00: HPA unlocked: 586070255 -> 586072368, native 586072368 [ 1.425180] ata1.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133 [ 1.425182] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.441918] ata1.00: configured for UDMA/133 [ 1.442016] scsi 0:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5 [ 1.442427] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 1.442467] sd 0:0:0:0: [sda] Write Protect is off [ 1.442469] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.442477] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.442488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.442589] sda: sda1 sda2 sda3 < sda5 > [ 1.458355] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.536862] scsi 1:0:1:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL02 PQ: 0 ANSI: 5 [ 1.644010] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 1.826157] usb 4-2: configuration #1 chosen from 1 choice [ 1.869679] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.869682] Uniform CD-ROM driver Revision: 3.20 [ 1.869875] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 1.870038] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 1.870109] Freeing unused kernel memory: 656k freed [ 1.870233] Write protecting the kernel read-only data: 7528k [ 1.906081] usb 4-1.3: new full speed USB device using uhci_hcd and address 4 [ 1.916965] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset [ 1.918296] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 1.921010] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.933795] [drm] Initialized drm 1.1.0 20060810 [ 1.940332] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.940336] i915 0000:00:02.0: setting latency timer to 64 [ 1.943111] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1.943114] [drm] MTRR allocation failed. Graphics performance may suffer. [ 1.943310] alloc irq_desc for 26 on node 0 [ 1.943311] alloc kstat_irqs on node 0 [ 1.943318] i915 0000:00:02.0: irq 26 for MSI/MSI-X [ 1.948754] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B [ 1.959737] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C [ 1.996396] i2c-adapter i2c-1: unable to read EDID block. [ 1.996398] i915 0000:00:02.0: DVI-D-1: no EDID data [ 2.050147] usb 4-1.3: configuration #1 chosen from 1 choice [ 2.205923] [drm] fb0: inteldrmfb frame buffer device [ 2.205935] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.269851] [drm] TMDS-12: set mode 1680x1050 20 [ 2.332444] Console: switching to colour frame buffer device 210x65 [ 2.542224] usbcore: registered new interface driver hiddev [ 2.544690] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.544708] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.544927] r8169 0000:02:00.0: setting latency timer to 64 [ 2.544967] alloc irq_desc for 27 on node 0 [ 2.544968] alloc kstat_irqs on node 0 [ 2.544981] r8169 0000:02:00.0: irq 27 for MSI/MSI-X [ 2.545384] eth0: RTL8168c/8111c at 0xffffc90000c7e000, 00:1f:d0:29:18:36, XID 3c4000c0 IRQ 27 [ 2.553468] pata_it8213 0000:03:05.0: version 0.0.3 [ 2.553479] pata_it8213 0000:03:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.554301] scsi4 : pata_it8213 [ 2.554439] scsi5 : pata_it8213 [ 2.554468] ata5: PATA max UDMA/66 cmd 0xd000 ctl 0xd100 bmdma 0xd400 irq 21 [ 2.554470] ata6: DUMMY [ 2.557286] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3 [ 2.557351] generic-usb 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.1-2/input0 [ 2.581288] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3:1.0/input/input4 [ 2.581347] generic-usb 0003:1532:0200.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Reclusa Keyboard] on usb-0000:00:1a.1-1.3/input0 [ 2.591134] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3:1.1/input/input5 [ 2.591175] generic-usb 0003:1532:0200.0003: input,hidraw2: USB HID v1.10 Device [Razer Reclusa Keyboard] on usb-0000:00:1a.1-1.3/input1 [ 2.591189] usbcore: registered new interface driver usbhid [ 2.591190] usbhid: v2.6:USB HID core driver [ 3.251637] PM: Starting manual resume from disk [ 3.251639] PM: Resume from partition 8:5 [ 3.251640] PM: Checking hibernation image. [ 3.251751] PM: Resume from disk failed. [ 3.268773] kjournald starting. Commit interval 5 seconds [ 3.268790] EXT3-fs: mounted filesystem with writeback data mode. [ 4.817848] udev: starting version 146 [ 5.799204] alloc irq_desc for 22 on node 0 [ 5.799207] alloc kstat_irqs on node 0 [ 5.799213] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.799241] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.912940] hda_codec: Unknown model for ALC889A, trying auto-probe from BIOS... [ 5.913164] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 6.686476] lp: driver loaded but no devices found [ 6.927176] Adding 11912156k swap on /dev/sda5. Priority:-1 extents:1 across:11912156k [ 7.581158] EXT3 FS on sda2, internal journal [ 8.712912] type=1505 audit(1251533899.572:2): operation="profile_load" pid=1854 name=/usr/share/gdm/guest-session/Xsession [ 8.721826] type=1505 audit(1251533899.580:3): operation="profile_load" pid=1855 name=/usr/bin/evince [ 8.727184] type=1505 audit(1251533899.584:4): operation="profile_load" pid=1855 name=/usr/bin/evince-previewer [ 8.730404] type=1505 audit(1251533899.588:5): operation="profile_load" pid=1855 name=/usr/bin/evince-thumbnailer [ 8.735084] type=1505 audit(1251533899.592:6): operation="profile_load" pid=1856 name=/sbin/dhclient3 [ 8.735606] type=1505 audit(1251533899.592:7): operation="profile_load" pid=1856 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 8.735853] type=1505 audit(1251533899.592:8): operation="profile_load" pid=1856 name=/usr/lib/connman/scripts/dhclient-script [ 8.737231] type=1505 audit(1251533899.596:9): operation="profile_load" pid=1857 name=/usr/sbin/tcpdump [ 8.751565] type=1505 audit(1251533899.608:10): operation="profile_load" pid=1858 name=/usr/lib/cups/backend/cups-pdf [ 8.752114] type=1505 audit(1251533899.612:11): operation="profile_load" pid=1858 name=/usr/sbin/cupsd [ 13.124602] i2c-adapter i2c-1: unable to read EDID block. [ 13.124605] i915 0000:00:02.0: DVI-D-1: no EDID data [ 13.128998] i2c-adapter i2c-1: unable to read EDID block. [ 13.129005] i915 0000:00:02.0: DVI-D-1: no EDID data [ 13.376830] i2c-adapter i2c-1: unable to read EDID block. [ 13.376833] i915 0000:00:02.0: DVI-D-1: no EDID data [ 13.381218] i2c-adapter i2c-1: unable to read EDID block. [ 13.381220] i915 0000:00:02.0: DVI-D-1: no EDID data [ 14.443276] r8169: eth0: link up [ 14.443280] r8169: eth0: link up [ 15.010035] ppdev: user-space parallel port driver [ 19.124460] i2c-adapter i2c-1: unable to read EDID block. [ 19.124463] i915 0000:00:02.0: DVI-D-1: no EDID data [ 19.128858] i2c-adapter i2c-1: unable to read EDID block. [ 19.128860] i915 0000:00:02.0: DVI-D-1: no EDID data [ 19.517935] i2c-adapter i2c-1: unable to read EDID block. [ 19.517939] i915 0000:00:02.0: DVI-D-1: no EDID data [ 19.522327] i2c-adapter i2c-1: unable to read EDID block. [ 19.522328] i915 0000:00:02.0: DVI-D-1: no EDID data [ 19.776425] i2c-adapter i2c-1: unable to read EDID block. [ 19.776427] i915 0000:00:02.0: DVI-D-1: no EDID data [ 19.780889] i2c-adapter i2c-1: unable to read EDID block. [ 19.780891] i915 0000:00:02.0: DVI-D-1: no EDID data [ 25.408007] eth0: no IPv6 routers present [ 31.200966] i2c-adapter i2c-1: unable to read EDID block. [ 31.200970] i915 0000:00:02.0: DVI-D-1: no EDID data [ 31.205801] i2c-adapter i2c-1: unable to read EDID block. [ 31.205803] i915 0000:00:02.0: DVI-D-1: no EDID data [ 31.461431] i2c-adapter i2c-1: unable to read EDID block. [ 31.461434] i915 0000:00:02.0: DVI-D-1: no EDID data [ 31.465935] i2c-adapter i2c-1: unable to read EDID block. [ 31.465938] i915 0000:00:02.0: DVI-D-1: no EDID data [ 31.724459] i2c-adapter i2c-1: unable to read EDID block. [ 31.724462] i915 0000:00:02.0: DVI-D-1: no EDID data [ 31.728864] i2c-adapter i2c-1: unable to read EDID block. [ 31.728866] i915 0000:00:02.0: DVI-D-1: no EDID data [ 32.912428] i2c-adapter i2c-1: unable to read EDID block. [ 32.912431] i915 0000:00:02.0: DVI-D-1: no EDID data [ 32.917014] i2c-adapter i2c-1: unable to read EDID block. [ 32.917016] i915 0000:00:02.0: DVI-D-1: no EDID data [ 61.265385] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 2723.616451] i2c-adapter i2c-1: unable to read EDID block. [ 2723.616456] i915 0000:00:02.0: DVI-D-1: no EDID data [ 2723.620859] i2c-adapter i2c-1: unable to read EDID block. [ 2723.620861] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4039.408429] i2c-adapter i2c-1: unable to read EDID block. [ 4039.408433] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4039.412828] i2c-adapter i2c-1: unable to read EDID block. [ 4039.412831] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4039.660420] i2c-adapter i2c-1: unable to read EDID block. [ 4039.660424] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4039.664944] i2c-adapter i2c-1: unable to read EDID block. [ 4039.664946] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4040.396434] i2c-adapter i2c-1: unable to read EDID block. [ 4040.396438] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4040.400829] i2c-adapter i2c-1: unable to read EDID block. [ 4040.400831] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4040.676426] i2c-adapter i2c-1: unable to read EDID block. [ 4040.676430] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4040.680826] i2c-adapter i2c-1: unable to read EDID block. [ 4040.680829] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4040.936412] i2c-adapter i2c-1: unable to read EDID block. [ 4040.936417] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4040.940816] i2c-adapter i2c-1: unable to read EDID block. [ 4040.940819] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4048.748440] i2c-adapter i2c-1: unable to read EDID block. [ 4048.748444] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4048.752927] i2c-adapter i2c-1: unable to read EDID block. [ 4048.752930] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4049.010069] i2c-adapter i2c-1: unable to read EDID block. [ 4049.010074] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4049.014471] i2c-adapter i2c-1: unable to read EDID block. [ 4049.014473] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4049.269433] i2c-adapter i2c-1: unable to read EDID block. [ 4049.269438] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4049.273828] i2c-adapter i2c-1: unable to read EDID block. [ 4049.273831] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4049.744947] i2c-adapter i2c-1: unable to read EDID block. [ 4049.744951] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4049.749348] i2c-adapter i2c-1: unable to read EDID block. [ 4049.749350] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4904.757650] type=1503 audit(1251538795.617:12): operation="open" pid=1859 parent=1845 profile="/usr/sbin/cupsd" requested_mask="::r" denied_mask="::r" fsuid=7 ouid=0 name="/dev/bus/usb/" [ 4917.440950] i2c-adapter i2c-1: unable to read EDID block. [ 4917.440955] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4917.445348] i2c-adapter i2c-1: unable to read EDID block. [ 4917.445351] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4941.788451] i2c-adapter i2c-1: unable to read EDID block. [ 4941.788455] i915 0000:00:02.0: DVI-D-1: no EDID data [ 4941.792869] i2c-adapter i2c-1: unable to read EDID block. [ 4941.792872] i915 0000:00:02.0: DVI-D-1: no EDID data [ 5019.145022] i2c-adapter i2c-1: unable to read EDID block. [ 5019.145026] i915 0000:00:02.0: DVI-D-1: no EDID data [ 5019.149593] i2c-adapter i2c-1: unable to read EDID block. [ 5019.149596] i915 0000:00:02.0: DVI-D-1: no EDID data [ 5037.112442] i2c-adapter i2c-1: unable to read EDID block. [ 5037.112446] i915 0000:00:02.0: DVI-D-1: no EDID data [ 5037.116849] i2c-adapter i2c-1: unable to read EDID block. [ 5037.116852] i915 0000:00:02.0: DVI-D-1: no EDID data [10052.903047] solarwinds[3517] trap divide error ip:7f9d3ef7df10 sp:7fff20514f50 error:0 in i965_dri.so[7f9d3ee4c000+2a3000] [10652.719440] solarwinds[3530] trap divide error ip:7f377929ef10 sp:7fff0a389020 error:0 in i965_dri.so[7f377916d000+2a3000] [11852.744388] solarwinds[3542] trap divide error ip:7f59e13daf10 sp:7fff2da77de0 error:0 in i965_dri.so[7f59e12a9000+2a3000] [13652.742662] solarwinds[3559] trap divide error ip:7f041021ff10 sp:7fffea577f80 error:0 in i965_dri.so[7f04100ee000+2a3000] [14252.725673] solarwinds[3572] trap divide error ip:7f41c1ecdf10 sp:7fff2fcf8d40 error:0 in i965_dri.so[7f41c1d9c000+2a3000] [14852.728058] solarwinds[3580] trap divide error ip:7fe33841cf10 sp:7fffb9b3f310 error:0 in i965_dri.so[7fe3382eb000+2a3000] [15452.727896] solarwinds[3584] trap divide error ip:7f8d48159f10 sp:7fff317619d0 error:0 in i965_dri.so[7f8d48028000+2a3000] [17252.743536] solarwinds[3601] trap divide error ip:7fc429886f10 sp:7fff63ac8530 error:0 in i965_dri.so[7fc429755000+2a3000] [17852.726462] solarwinds[3614] trap divide error ip:7f35a47e3f10 sp:7fff7cedcf50 error:0 in i965_dri.so[7f35a46b2000+2a3000] [18452.713741] solarwinds[3622] trap divide error ip:7ff8d5376f10 sp:7fff9c6d17e0 error:0 in i965_dri.so[7ff8d5245000+2a3000] [19052.713529] solarwinds[3626] trap divide error ip:7f2e69c23f10 sp:7fffeed73dc0 error:0 in i965_dri.so[7f2e69af2000+2a3000] [20252.746470] solarwinds[3641] trap divide error ip:7f5f087aaf10 sp:7fffda627860 error:0 in i965_dri.so[7f5f08679000+2a3000] [21456.983406] render error detected, EIR: 0x00000010 [21456.983410] IPEIR: 0x00000000 [21456.983412] IPEHR: 0x02000000 [21456.983414] INSTDONE: 0x808fffff [21456.983415] INSTPS: 0x8001e025 [21456.983417] INSTDONE1: 0x999fffae [21456.983419] ACTHD: 0x0c96b1b4 [21456.983420] page table error [21456.983422] PGTBL_ER: 0x01000000 [21456.983425] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking [21600.568024] INFO: task i915/2:869 blocked for more than 120 seconds. [21600.568028] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [21600.568030] i915/2 D 00000000ffffffff 0 869 2 0x00000000 [21600.568035] ffff880233cddd70 0000000000000046 0000000000000000 0000000000015580 [21600.568039] ffff880234a09a60 0000000000015580 0000000000015580 0000000000015580 [21600.568043] 0000000000015580 ffff880234a09a60 0000000000015580 0000000000015580 [21600.568047] Call Trace: [21600.568056] [] __mutex_lock_slowpath+0xd7/0x160 [21600.568060] [] mutex_lock+0x26/0x50 [21600.568077] [] i915_gem_retire_work_handler+0x38/0x90 [i915] [21600.568087] [] ? i915_gem_retire_work_handler+0x0/0x90 [i915] [21600.568092] [] run_workqueue+0x95/0x170 [21600.568095] [] worker_thread+0xa4/0x120 [21600.568099] [] ? autoremove_wake_function+0x0/0x40 [21600.568102] [] ? worker_thread+0x0/0x120 [21600.568105] [] kthread+0xa6/0xb0 [21600.568108] [] child_rip+0xa/0x20 [21600.568111] [] ? kthread+0x0/0xb0 [21600.568114] [] ? child_rip+0x0/0x20 [21600.568128] INFO: task Xorg:1026 blocked for more than 120 seconds. [21600.568130] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [21600.568132] Xorg D 0000000000000000 0 1026 1025 0x00400004 [21600.568136] ffff88023243fcb8 0000000000000086 ffff88023243fc90 0000000000015580 [21600.568140] ffff880215c89a60 0000000000015580 0000000000015580 0000000000015580 [21600.568144] 0000000000015580 ffff880215c89a60 0000000000015580 0000000000015580 [21600.568147] Call Trace: [21600.568151] [] __mutex_lock_slowpath+0xd7/0x160 [21600.568155] [] ? sock_aio_write+0x0/0x150 [21600.568158] [] mutex_lock+0x26/0x50 [21600.568168] [] i915_gem_throttle_ioctl+0x36/0x90 [i915] [21600.568184] [] drm_ioctl+0x17e/0x3a0 [drm] [21600.568189] [] ? default_spin_lock_flags+0x9/0x10 [21600.568192] [] ? _spin_lock_irqsave+0x2a/0x40 [21600.568196] [] vfs_ioctl+0x7c/0xa0 [21600.568200] [] do_vfs_ioctl+0x79/0x370 [21600.568203] [] sys_ioctl+0x81/0xa0 [21600.568207] [] system_call_fastpath+0x16/0x1b [21720.568022] INFO: task i915/2:869 blocked for more than 120 seconds. [21720.568026] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [21720.568029] i915/2 D 00000000ffffffff 0 869 2 0x00000000 [21720.568033] ffff880233cddd70 0000000000000046 0000000000000000 0000000000015580 [21720.568038] ffff880234a09a60 0000000000015580 0000000000015580 0000000000015580 [21720.568042] 0000000000015580 ffff880234a09a60 0000000000015580 0000000000015580 [21720.568046] Call Trace: [21720.568055] [] __mutex_lock_slowpath+0xd7/0x160 [21720.568059] [] mutex_lock+0x26/0x50 [21720.568075] [] i915_gem_retire_work_handler+0x38/0x90 [i915] [21720.568086] [] ? i915_gem_retire_work_handler+0x0/0x90 [i915] [21720.568091] [] run_workqueue+0x95/0x170 [21720.568094] [] worker_thread+0xa4/0x120 [21720.568097] [] ? autoremove_wake_function+0x0/0x40 [21720.568100] [] ? worker_thread+0x0/0x120 [21720.568103] [] kthread+0xa6/0xb0 [21720.568107] [] child_rip+0xa/0x20 [21720.568110] [] ? kthread+0x0/0xb0 [21720.568112] [] ? child_rip+0x0/0x20 [21720.568126] INFO: task Xorg:1026 blocked for more than 120 seconds. [21720.568128] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [21720.568130] Xorg D 0000000000000000 0 1026 1025 0x00400004 [21720.568134] ffff88023243fcb8 0000000000000086 ffff88023243fc90 0000000000015580 [21720.568138] ffff880215c89a60 0000000000015580 0000000000015580 0000000000015580 [21720.568141] 0000000000015580 ffff880215c89a60 0000000000015580 0000000000015580 [21720.568145] Call Trace: [21720.568149] [] __mutex_lock_slowpath+0xd7/0x160 [21720.568153] [] ? sock_aio_write+0x0/0x150 [21720.568156] [] mutex_lock+0x26/0x50 [21720.568166] [] i915_gem_throttle_ioctl+0x36/0x90 [i915] [21720.568182] [] drm_ioctl+0x17e/0x3a0 [drm] [21720.568186] [] ? default_spin_lock_flags+0x9/0x10 [21720.568190] [] ? _spin_lock_irqsave+0x2a/0x40 [21720.568194] [] vfs_ioctl+0x7c/0xa0 [21720.568197] [] do_vfs_ioctl+0x79/0x370 [21720.568200] [] sys_ioctl+0x81/0xa0 [21720.568204] [] system_call_fastpath+0x16/0x1b [21840.568026] INFO: task i915/2:869 blocked for more than 120 seconds. [21840.568030] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [21840.568032] i915/2 D 00000000ffffffff 0 869 2 0x00000000 [21840.568037] ffff880233cddd70 0000000000000046 0000000000000000 0000000000015580 [21840.568042] ffff880234a09a60 0000000000015580 0000000000015580 0000000000015580 [21840.568045] 0000000000015580 ffff880234a09a60 0000000000015580 0000000000015580 [21840.568049] Call Trace: [21840.568059] [] __mutex_lock_slowpath+0xd7/0x160 [21840.568062] [] mutex_lock+0x26/0x50 [21840.568080] [] i915_gem_retire_work_handler+0x38/0x90 [i915] [21840.568091] [] ? i915_gem_retire_work_handler+0x0/0x90 [i915] [21840.568096] [] run_workqueue+0x95/0x170 [21840.568099] [] worker_thread+0xa4/0x120 [21840.568102] [] ? autoremove_wake_function+0x0/0x40 [21840.568106] [] ? worker_thread+0x0/0x120 [21840.568108] [] kthread+0xa6/0xb0 [21840.568112] [] child_rip+0xa/0x20 [21840.568115] [] ? kthread+0x0/0xb0 [21840.568118] [] ? child_rip+0x0/0x20 [21840.568132] INFO: task Xorg:1026 blocked for more than 120 seconds. [21840.568134] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [21840.568136] Xorg D 0000000000000000 0 1026 1025 0x00400004 [21840.568140] ffff88023243fcb8 0000000000000086 ffff88023243fc90 0000000000015580 [21840.568144] ffff880215c89a60 0000000000015580 0000000000015580 0000000000015580 [21840.568148] 0000000000015580 ffff880215c89a60 0000000000015580 0000000000015580 [21840.568151] Call Trace: [21840.568155] [] __mutex_lock_slowpath+0xd7/0x160 [21840.568159] [] ? sock_aio_write+0x0/0x150 [21840.568163] [] mutex_lock+0x26/0x50 [21840.568173] [] i915_gem_throttle_ioctl+0x36/0x90 [i915] [21840.568188] [] drm_ioctl+0x17e/0x3a0 [drm] [21840.568193] [] ? default_spin_lock_flags+0x9/0x10 [21840.568197] [] ? _spin_lock_irqsave+0x2a/0x40 [21840.568201] [] vfs_ioctl+0x7c/0xa0 [21840.568204] [] do_vfs_ioctl+0x79/0x370 [21840.568207] [] sys_ioctl+0x81/0xa0 [21840.568211] [] system_call_fastpath+0x16/0x1b [21960.568023] INFO: task i915/2:869 blocked for more than 120 seconds. [21960.568027] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [21960.568029] i915/2 D 00000000ffffffff 0 869 2 0x00000000 [21960.568034] ffff880233cddd70 0000000000000046 0000000000000000 0000000000015580 [21960.568038] ffff880234a09a60 0000000000015580 0000000000015580 0000000000015580 [21960.568042] 0000000000015580 ffff880234a09a60 0000000000015580 0000000000015580 [21960.568046] Call Trace: [21960.568055] [] __mutex_lock_slowpath+0xd7/0x160 [21960.568058] [] mutex_lock+0x26/0x50 [21960.568075] [] i915_gem_retire_work_handler+0x38/0x90 [i915] [21960.568086] [] ? i915_gem_retire_work_handler+0x0/0x90 [i915] [21960.568091] [] run_workqueue+0x95/0x170 [21960.568094] [] worker_thread+0xa4/0x120 [21960.568098] [] ? autoremove_wake_function+0x0/0x40 [21960.568101] [] ? worker_thread+0x0/0x120 [21960.568104] [] kthread+0xa6/0xb0 [21960.568107] [] child_rip+0xa/0x20 [21960.568110] [] ? kthread+0x0/0xb0 [21960.568113] [] ? child_rip+0x0/0x20 [21960.568128] INFO: task Xorg:1026 blocked for more than 120 seconds. [21960.568130] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [21960.568132] Xorg D 0000000000000000 0 1026 1025 0x00400004 [21960.568136] ffff88023243fcb8 0000000000000086 ffff88023243fc90 0000000000015580 [21960.568140] ffff880215c89a60 0000000000015580 0000000000015580 0000000000015580 [21960.568143] 0000000000015580 ffff880215c89a60 0000000000015580 0000000000015580 [21960.568147] Call Trace: [21960.568151] [] __mutex_lock_slowpath+0xd7/0x160 [21960.568155] [] ? sock_aio_write+0x0/0x150 [21960.568158] [] mutex_lock+0x26/0x50 [21960.568168] [] i915_gem_throttle_ioctl+0x36/0x90 [i915] [21960.568184] [] drm_ioctl+0x17e/0x3a0 [drm] [21960.568188] [] ? default_spin_lock_flags+0x9/0x10 [21960.568192] [] ? _spin_lock_irqsave+0x2a/0x40 [21960.568196] [] vfs_ioctl+0x7c/0xa0 [21960.568199] [] do_vfs_ioctl+0x79/0x370 [21960.568202] [] sys_ioctl+0x81/0xa0 [21960.568206] [] system_call_fastpath+0x16/0x1b [22080.568022] INFO: task i915/2:869 blocked for more than 120 seconds. [22080.568025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [22080.568028] i915/2 D 00000000ffffffff 0 869 2 0x00000000 [22080.568033] ffff880233cddd70 0000000000000046 0000000000000000 0000000000015580 [22080.568037] ffff880234a09a60 0000000000015580 0000000000015580 0000000000015580 [22080.568041] 0000000000015580 ffff880234a09a60 0000000000015580 0000000000015580 [22080.568045] Call Trace: [22080.568054] [] __mutex_lock_slowpath+0xd7/0x160 [22080.568058] [] mutex_lock+0x26/0x50 [22080.568075] [] i915_gem_retire_work_handler+0x38/0x90 [i915] [22080.568086] [] ? i915_gem_retire_work_handler+0x0/0x90 [i915] [22080.568091] [] run_workqueue+0x95/0x170 [22080.568094] [] worker_thread+0xa4/0x120 [22080.568097] [] ? autoremove_wake_function+0x0/0x40 [22080.568100] [] ? worker_thread+0x0/0x120 [22080.568103] [] kthread+0xa6/0xb0 [22080.568107] [] child_rip+0xa/0x20 [22080.568109] [] ? kthread+0x0/0xb0 [22080.568112] [] ? child_rip+0x0/0x20 [22080.568126] INFO: task Xorg:1026 blocked for more than 120 seconds. [22080.568128] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [22080.568130] Xorg D 0000000000000000 0 1026 1025 0x00400004 [22080.568134] ffff88023243fcb8 0000000000000086 ffff88023243fc90 0000000000015580 [22080.568138] ffff880215c89a60 0000000000015580 0000000000015580 0000000000015580 [22080.568141] 0000000000015580 ffff880215c89a60 0000000000015580 0000000000015580 [22080.568145] Call Trace: [22080.568149] [] __mutex_lock_slowpath+0xd7/0x160 [22080.568154] [] ? sock_aio_write+0x0/0x150 [22080.568157] [] mutex_lock+0x26/0x50 [22080.568167] [] i915_gem_throttle_ioctl+0x36/0x90 [i915] [22080.568182] [] drm_ioctl+0x17e/0x3a0 [drm] [22080.568187] [] ? default_spin_lock_flags+0x9/0x10 [22080.568190] [] ? _spin_lock_irqsave+0x2a/0x40 [22080.568195] [] vfs_ioctl+0x7c/0xa0 [22080.568198] [] do_vfs_ioctl+0x79/0x370 [22080.568201] [] sys_ioctl+0x81/0xa0 [22080.568205] [] system_call_fastpath+0x16/0x1b