Linux version 2.6.29-gentoo-r5 (root@livecd) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #1 Tue Jul 21 13:54:06 CEST 2009 KERNEL supported cpus: AMD AuthenticAMD BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) last_pfn = 0x7fff0 max_arch_pfn = 0x1000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 379fe000 @ 7000-d000 NX (Execute Disable) protection: active RAMDISK: 37ea9000 - 37fef73b Allocated new RAMDISK: 004fa000 - 0064073b Move RAMDISK from 0000000037ea9000 - 0000000037fef73a to 004fa000 - 0064073a ACPI: RSDP 000F7560, 0014 (r0 Nvidia) ACPI: RSDT 7FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7FFF3180, 65F2 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 7FFF0000, 0040 ACPI: SSDT 7FFF9880, 00D6 (r1 PTLTD POWERNOW 1 LTP 1) ACPI: MCFG 7FFF99C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: APIC 7FFF97C0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: Local APIC address 0xfee00000 1157MB HIGHMEM available. 889MB LOWMEM available. mapped low ram: 0 - 379fe000 low ram: 00000000 - 379fe000 bootmap 00009000 - 0000ff40 (7 early reservations) ==> bootmem [0000000000 - 00379fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00004f28fc] TEXT DATA BSS ==> [0000100000 - 00004f28fc] #2 [00004f3000 - 00004fa000] INIT_PG_TABLE ==> [00004f3000 - 00004fa000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #5 [00004fa000 - 000064073b] NEW RAMDISK ==> [00004fa000 - 000064073b] #6 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000379fe HighMem 0x000379fe -> 0x0007fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fff0 On node 0 totalpages: 524175 free_area_init_node: node 0, pgdat c0476720, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1748 pages used for memmap Normal zone: 221994 pages, LIFO batch:31 HighMem zone: 2316 pages used for memmap HighMem zone: 294118 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520079 Kernel command line: root=/dev/sda1 ro quiet hpet=force nouveau.modeset=1 Unknown boot option `nouveau.modeset=1': ignoring Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c04be000 soft=c04bd000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2010.599 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2073220k/2097088k available (2831k kernel code, 22608k reserved, 748k data, 228k init, 1185736k highmem) virtual kernel memory layout: fixmap : 0xfffac000 - 0xfffff000 ( 332 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) .init : 0xc0481000 - 0xc04ba000 ( 228 kB) .data : 0xc03c3fca - 0xc047f270 ( 748 kB) .text : 0xc0100000 - 0xc03c3fca (2831 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.19 BogoMIPS (lpj=2010599) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20081204 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 net_namespace: 496 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.1: reg 10 io port: [0xe400-0xe41f] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xd3104000-0xd3104fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 10 io port: [0xdc00-0xdcff] pci 0000:00:04.0: reg 14 io port: [0xe000-0xe0ff] pci 0000:00:04.0: reg 18 32bit mmio: [0xd3103000-0xd3103fff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3] pci 0000:00:07.0: reg 18 io port: [0x970-0x977] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73] pci 0000:00:07.0: reg 20 io port: [0xd800-0xd80f] pci 0000:00:07.0: reg 24 32bit mmio: [0xd3102000-0xd3102fff] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3] pci 0000:00:08.0: reg 18 io port: [0x960-0x967] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63] pci 0000:00:08.0: reg 20 io port: [0xc400-0xc40f] pci 0000:00:08.0: reg 24 32bit mmio: [0xd3101000-0xd3101fff] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd3100000-0xd3100fff] pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb007] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:05:06.0: reg 10 32bit mmio: [0xd3000000-0xd300ffff] pci 0000:05:06.0: reg 14 32bit mmio: [0xd3010000-0xd301ffff] pci 0000:00:09.0: transparent bridge pci 0000:00:09.0: bridge 32bit mmio: [0xd3000000-0xd30fffff] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd0ffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd1000000-0xd1ffffff] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f] pci 0000:01:00.0: reg 30 32bit mmio: [0xd2000000-0xd201ffff] pci 0000:00:0e.0: bridge io port: [0xa000-0xafff] pci 0000:00:0e.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.14 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4000-0x407f has been reserved system 00:01: ioport range 0x4080-0x40ff has been reserved system 00:01: ioport range 0x4400-0x447f has been reserved system 00:01: ioport range 0x4480-0x44ff has been reserved system 00:01: ioport range 0x4800-0x487f has been reserved system 00:01: ioport range 0x4880-0x48ff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0xd5800-0xd7fff has been reserved system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved system 00:0c: iomem range 0xfc000-0xfffff could not be reserved system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0c: iomem range 0xfefff000-0xfeffffff has been reserved system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 pci 0000:00:09.0: IO window: disabled pci 0000:00:09.0: MEM window: 0xd3000000-0xd30fffff pci 0000:00:09.0: PREFETCH window: disabled pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: disabled pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: disabled pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0e.0: IO window: 0xa000-0xafff pci 0000:00:0e.0: MEM window: 0xd0000000-0xd2ffffff pci 0000:00:0e.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:05: resource 0 mem: [0x0-0x0] pci_bus 0000:05: resource 1 mem: [0xd3000000-0xd30fffff] pci_bus 0000:05: resource 2 mem: [0x0-0x0] pci_bus 0000:05: resource 3 io: [0x00-0xffff] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:04: resource 0 mem: [0x0-0x0] pci_bus 0000:04: resource 1 mem: [0x0-0x0] pci_bus 0000:04: resource 2 mem: [0x0-0x0] pci_bus 0000:04: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 mem: [0x0-0x0] pci_bus 0000:03: resource 1 mem: [0x0-0x0] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 mem: [0x0-0x0] pci_bus 0000:02: resource 1 mem: [0x0-0x0] pci_bus 0000:02: resource 2 mem: [0x0-0x0] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff] pci_bus 0000:01: resource 2 mem: [0xc0000000-0xcfffffff] pci_bus 0000:01: resource 3 mem: [0x0-0x0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 1305k freed Machine check exception polling timer started. highmem bounce pool size: 64 pages fuse init (API version 7.11) msgmni has been set to 1737 io scheduler noop registered io scheduler cfq registered (default) pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:0e.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X Linux agpgart interface v0.103 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] processor ACPI_CPU:00: registered as cooling_device0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) loop: module loaded tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 Switched to high resolution mode on CPU 0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6: WDC WD360GD-00FLA2, 31.08F31, max UDMA/133 ata1.00: 72303840 sectors, multi 1: LBA48 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FL 31.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors: (37.0 GB/34.4 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 72303840 512-byte hardware sectors: (37.0 GB/34.4 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-6: WDC WD2000JD-22HBC0, 08.02D08, max UDMA/133 ata2.00: 390721968 sectors, multi 1: LBA48 ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD2000JD-22H 08.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:08.0: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:06.0: version 0.4.1 pata_amd 0000:00:06.0: setting latency timer to 64 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata5.00: ATAPI: ASUS DRW-2014L1, 1.01, max UDMA/66 ata5: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) ata5.00: configured for UDMA/66 scsi 4:0:0:0: CD-ROM ASUS DRW-2014L1 1.01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xd3104000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 i2c /dev entries driver i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 it87: Found IT8712F chip at 0x290, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296] ACPI: Device needs an ACPI driver it87 it87.656: Detected broken BIOS defaults, disabling PWM interface Bluetooth: Generic Bluetooth USB driver ver 0.4 usbcore: registered new interface driver btusb cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18a. ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 23 (level, low) -> IRQ 23 Intel ICH 0000:00:04.0: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50849 usecs intel8x0: clocking to 46788 ALSA device list: #0: NVidia CK804 with ALC850 at irq 23 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6 Using IPI Shortcut mode usb 2-1: new low speed USB device using ohci_hcd and address 2 Freeing unused kernel memory: 228k freed ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names usb 2-1: configuration #1 chosen from 1 choice input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2 generic-usb 0003:062A:0201.0001: input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-1/input0 input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input3 generic-usb 0003:062A:0201.0002: input: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:02.0-1/input1 Marking TSC unstable due to cpufreq changes usb 2-2: new low speed USB device using ohci_hcd and address 3 Clocksource tsc unstable (delta = -92558360 ns) usb 2-2: configuration #1 chosen from 1 choice input: Acrox USB & PS/2 Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4 generic-usb 0003:0F62:1001.0003: input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:02.0-2/input0 udev: starting version 141 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:0a.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 nouveau 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 nouveau 0000:01:00.0: setting latency timer to 64 nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b300b1) nouveau 0000:01:00.0: Attempting to load BIOS image from PROM nouveau 0000:01:00.0: ... appears to be valid nouveau 0000:01:00.0: BIT BIOS found nouveau 0000:01:00.0: Bios version 05.73.22.54 nouveau 0000:01:00.0: TMDS table script pointers not stubbed nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 nouveau 0000:01:00.0: Raw DCB entry 1: 03011312 00000000 nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00c0c080 nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE0D nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD4B7 nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDBEB nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD6F nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF7B nouveau 0000:01:00.0: Output script table version 0x11 unknown nouveau 0000:01:00.0: Output script table version 0x11 unknown nouveau 0000:01:00.0: Output script table version 0x11 unknown nouveau 0000:01:00.0: Output script table version 0x11 unknown forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:13:d4:54:18:96 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [TTM] TTM available graphics memory: 1013 MiB [TTM] TTM available object memory: 434 MiB nouveau 0000:01:00.0: Allocating FIFO number 0 nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 0 nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 nouveau 0000:01:00.0: Saving VGA fonts i2c-adapter i2c-2: unable to read EDID block. nouveau 0000:01:00.0: VGA-1: no EDID data allocated 1280x1024 fb: 0x49000, bo f6e0e0c0 Console: switching to colour frame buffer device 160x64 nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0 nouveau 0000:01:00.0: CTRC mode on CRTC 0: nouveau 0000:01:00.0: Output mode on CRTC 0: nouveau 0000:01:00.0: vpll: n 8 m 2 log2p 0 [drm] TMDS-8: set mode 1280x1024 1e nouveau 0000:01:00.0: nv_output_mode_set called for encoder 1 nouveau 0000:01:00.0: 0xC264: Parsing digital output script table nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0 nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 EXT3 (no)acl options not supported EXT3 (no)user_xattr options not supported kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 2168764k swap on /dev/sda2. Priority:-1 extents:1 across:2168764k eth0: no link during initialization. eth0: link up. vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 1 processor cores. vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 2.2.0 (interface 0x000a0009). vboxnet0 (): not using net_device_ops yet i2c-adapter i2c-2: unable to read EDID block. nouveau 0000:01:00.0: VGA-1: no EDID data i2c-adapter i2c-2: unable to read EDID block. nouveau 0000:01:00.0: VGA-1: no EDID data i2c-adapter i2c-2: unable to read EDID block. nouveau 0000:01:00.0: VGA-1: no EDID data i2c-adapter i2c-2: unable to read EDID block. nouveau 0000:01:00.0: VGA-1: no EDID data nouveau 0000:01:00.0: Allocating FIFO number 1 nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 1