Linux version 2.6.30 (root@N5) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #2 SMP PREEMPT Thu Jun 11 12:44:15 CEST 2009
Command line: root=/dev/sda3
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007dcf4000 (usable)
 BIOS-e820: 000000007dcf4000 - 000000007def5000 (ACPI NVS)
 BIOS-e820: 000000007def5000 - 000000007eec3000 (ACPI data)
 BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
 BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
 BIOS-e820: 000000007eec8000 - 000000007eeca000 (ACPI NVS)
 BIOS-e820: 000000007eeca000 - 000000007eecb000 (ACPI data)
 BIOS-e820: 000000007eecb000 - 000000007eedf000 (ACPI NVS)
 BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
 BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
 BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
 BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7dcf4 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0FFE00000 mask FFFE00000 write-protect
  1 base 000000000 mask F80000000 write-back
  2 base 07F000000 mask FFF000000 uncachable
  3 base 07EF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
init_memory_mapping: 0000000000000000-000000007dcf4000
 0000000000 - 007dc00000 page 2M
 007dc00000 - 007dcf4000 page 4k
kernel direct mapping tables up to 7dcf4000 @ 8000-c000
ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE   Apple00 0000008E      01000013)
ACPI: FACP 000000007eeec000 000F4 (v03 APPLE   Apple00 0000008E Loki 0000005F)
ACPI: DSDT 000000007eee1000 045B6 (v01 APPLE   MacBook 00030001 INTL 20061109)
ACPI: FACS 000000007eecb000 00040
ACPI: HPET 000000007eeeb000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: APIC 000000007eeea000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: MCFG 000000007eee9000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: SBST 000000007eee7000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: ECDT 000000007eee6000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
ACPI: SSDT 000000007eec7000 004DC (v01  APPLE    CpuPm 00003000 INTL 20061109)
ACPI: SSDT 000000007eec6000 0025F (v01  APPLE  Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 000000007eec5000 000A6 (v01  APPLE  Cpu1Tst 00003000 INTL 20061109)
ACPI: SSDT 000000007eee0000 00544 (v01 SataRe  SataPri 00001000 INTL 20061109)
ACPI: SSDT 000000007eedf000 00477 (v01 SataRe  SataSec 00001000 INTL 20061109)
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 007dcf4000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 000065611c]    TEXT DATA BSS ==> [0000200000 - 000065611c]
  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #4 [0000657000 - 000065722d]              BRK ==> [0000657000 - 000065722d]
  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0007dcf4
On node 0 totalpages: 515219
  DMA zone: 56 pages used for memmap
  DMA zone: 1211 pages reserved
  DMA zone: 2732 pages, LIFO batch:0
  DMA32 zone: 6990 pages used for memmap
  DMA32 zone: 504230 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880001011000, static data 70240 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 506962
Kernel command line: root=/dev/sda3
Initializing CPU#0
NR_IRQS:384
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1979.857 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Memory: 2023672k/2061264k available (2433k kernel code, 388k absent, 36548k reserved, 1125k data, 336k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3959.71 BogoMIPS (lpj=1979857)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3989.79 BogoMIPS (lpj=1994899)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7949.51 BogoMIPS).
net_namespace: 1304 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: MCFG area at f0000000 reserved in E820
PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0x90100000-0x901fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
pci 0000:00:02.0: reg 20 io port: [0x3110-0x3117]
pci 0000:00:02.1: reg 10 64bit mmio: [0x90200000-0x902fffff]
pci 0000:00:1a.0: reg 20 io port: [0x30c0-0x30df]
pci 0000:00:1a.1: reg 20 io port: [0x30a0-0x30bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0x90704c00-0x90704fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0x90700000-0x90703fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x90704800-0x90704bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
pci 0000:00:1f.1: reg 10 io port: [0x3108-0x310f]
pci 0000:00:1f.1: reg 14 io port: [0x3124-0x3127]
pci 0000:00:1f.1: reg 18 io port: [0x3100-0x3107]
pci 0000:00:1f.1: reg 1c io port: [0x3120-0x3123]
pci 0000:00:1f.1: reg 20 io port: [0x30e0-0x30ef]
pci 0000:00:1f.2: reg 10 io port: [0x30f8-0x30ff]
pci 0000:00:1f.2: reg 14 io port: [0x311c-0x311f]
pci 0000:00:1f.2: reg 18 io port: [0x30f0-0x30f7]
pci 0000:00:1f.2: reg 1c io port: [0x3118-0x311b]
pci 0000:00:1f.2: reg 20 io port: [0x3020-0x302f]
pci 0000:00:1f.2: reg 24 io port: [0x4000-0x400f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x90705000-0x907050ff]
pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
pci 0000:00:1c.0: bridge 32bit mmio: [0x90600000-0x906fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0x90500000-0x90503fff]
pci 0000:02:00.0: reg 18 64bit mmio: [0x90000000-0x900fffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.4: bridge 32bit mmio: [0x90500000-0x905fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0x90000000-0x900fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0x90400000-0x90403fff]
pci 0000:03:00.0: reg 18 io port: [0x2000-0x20ff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.5: bridge 32bit mmio: [0x90400000-0x904fffff]
pci 0000:04:03.0: reg 10 32bit mmio: [0x90300000-0x90300fff]
pci 0000:04:03.0: supports D1 D2
pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0x90300000-0x903fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:07: ioport range 0x680-0x69f has been reserved
system 00:07: ioport range 0x800-0x80f has been reserved
system 00:07: ioport range 0x810-0x817 has been reserved
system 00:07: ioport range 0x400-0x47f has been reserved
system 00:07: ioport range 0x500-0x53f has been reserved
system 00:07: ioport range 0x1640-0x164f has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: 0x90600000-0x906fffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4:   IO window: disabled
pci 0000:00:1c.4:   MEM window: 0x90500000-0x905fffff
pci 0000:00:1c.4:   PREFETCH window: 0x00000090000000-0x000000900fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.5:   IO window: 0x2000-0x2fff
pci 0000:00:1c.5:   MEM window: 0x90400000-0x904fffff
pci 0000:00:1c.5:   PREFETCH window: 0x00000090800000-0x000000908fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0x90300000-0x903fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1c.0: enabling device (0000 -> 0002)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0x90600000-0x906fffff]
pci_bus 0000:02: resource 1 mem: [0x90500000-0x905fffff]
pci_bus 0000:02: resource 2 pref mem [0x90000000-0x900fffff]
pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0x90400000-0x904fffff]
pci_bus 0000:03: resource 2 pref mem [0x90800000-0x908fffff]
pci_bus 0000:04: resource 1 mem: [0x90300000-0x903fffff]
pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 3953
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input4
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
ACPI: SSDT 000000007eec9c18 002BC (v01  APPLE  Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 000000007eec8c98 00222 (v01  APPLE  Cpu0Cst 00003001 INTL 20061109)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switched to high resolution mode on CPU 0
ACPI: CPU0 (power states: C1[C1] C2[C2]<7>Switched to high resolution mode on CPU 1
 C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 000000007eec9f18 000C8 (v01  APPLE  Cpu1Ist 00003000 INTL 20061109)
ACPI: SSDT 000000007eec8f18 00085 (v01  APPLE  Cpu1Cst 00003000 INTL 20061109)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 15868K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 27 for MSI/MSI-X
ACPI: Battery Slot [BAT0] (battery present)
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
allocated 1280x800 fb: 0x00fdf000, bo ffff88007d9acc00
[drm] LVDS-8: set mode 1280x800 17
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input5
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03)
PIIX_IDE 0000:00:1f.1: power state changed by ACPI to D0
PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x30e0-0x30e7
    ide1: BM-DMA at 0x30e8-0x30ef
Probing IDE interface ide0...
hda: MATSHITACD-RW CW-8221, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x30f8 ctl 0x311c bmdma 0x3020 irq 18
ata2: SATA max UDMA/133 cmd 0x30f0 ctl 0x3118 bmdma 0x3028 irq 18
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
ata1.00: ATA-8: FUJITSU MHY2120BH, 0081000D, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHY2120B 0081 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
Clocksource tsc unstable (delta = -360264040 ns)
EXT3-fs: sda3: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 10256428
ext3_orphan_cleanup: deleting unreferenced inode 3948561
ext3_orphan_cleanup: deleting unreferenced inode 3948560
ext3_orphan_cleanup: deleting unreferenced inode 3948557
ext3_orphan_cleanup: deleting unreferenced inode 3948555
ext3_orphan_cleanup: deleting unreferenced inode 3948554
EXT3-fs: sda3: 6 orphan inodes deleted
EXT3-fs: recovery complete.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 336k freed
NET: Registered protocol family 1
udev: starting version 141
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
wl 0000:02:00.0: setting latency timer to 64
eth0 (wl): not using net_device_ops yet
sky2 driver version 1.22
sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:03:00.0: setting latency timer to 64
sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:03:00.0: irq 28 for MSI/MSI-X
sky2 eth1: addr 00:1b:63:b8:0e:08
eth0: Broadcom BCM4328 802.11 Wireless Controller 5.10.91.9
udev: renamed network interface eth0 to eth1
udev: renamed network interface eth1_rename to eth0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: Attached scsi generic sg0 type 0
applesmc: Apple MacBook (v3) detected:
applesmc:  - Model with accelerometer
applesmc:  - Model without light sensors and backlight
applesmc:  - Model with 10 temperature sensors
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x000030c0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 16, io base 0x000030a0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.30 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.30 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.30 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
applesmc: device successfully initialized (0xe0, 0x00).
applesmc: device successfully initialized.
applesmc: 1 fans found.
input: applesmc as /devices/platform/applesmc.768/input/input6
applesmc: driver successfully loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.30 ehci_hcd
usb usb6: SerialNumber: 0000:00:1a.7
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.30 ehci_hcd
usb usb7: SerialNumber: 0000:00:1d.7
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 7-4: new high speed USB device using ehci_hcd and address 2
usb 7-4: New USB device found, idVendor=05ac, idProduct=8300
usb 7-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 7-4: configuration #1 chosen from 1 choice
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: New USB device found, idVendor=05ac, idProduct=1000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input7
generic-usb 0003:05AC:1000.0001: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/input/input8
generic-usb 0003:05AC:1000.0002: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=05ac, idProduct=8242
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: IR Receiver
usb 5-1: Manufacturer: Apple Computer, Inc.
usb 5-1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
apple 0003:05AC:8242.0003: claimed by neither input, hiddev nor hidraw
apple 0003:05AC:8242.0003: hw start failed
usb 5-2: new full speed USB device using uhci_hcd and address 3
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda3, internal journal
usb 5-2: New USB device found, idVendor=05ac, idProduct=022a
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Apple Internal Keyboard / Trackpad
usb 5-2: Manufacturer: Apple Computer
usb 5-2: configuration #1 chosen from 1 choice
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.0/input/input9
apple 0003:05AC:022A.0004: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.2/input/input10
apple 0003:05AC:022A.0005: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
appletouch: Geyser mode initialized.
input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.1/input/input11
usbcore: registered new interface driver appletouch
usb 7-4: USB disconnect, address 2
usb 7-4: new high speed USB device using ehci_hcd and address 5
usb 7-4: New USB device found, idVendor=05ac, idProduct=8501
usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-4: Product: Built-in iSight
usb 7-4: Manufacturer: Micron
usb 7-4: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Adding 2097124k swap on /dev/sda4.  Priority:-1 extents:1 across:2097124k 
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
sky2 eth0: enabling interface
NET: Registered protocol family 17
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
[drm] TV-15: set mode 1024x768 20
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
usb 1-1: USB disconnect, address 2
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: New USB device found, idVendor=05ac, idProduct=8205
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
eth1: no IPv6 routers present
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
eth0: no IPv6 routers present
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data