Linux version 2.6.29-gentoo-r4 (root@tacticalops) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #3 SMP Sun May 24 00:54:31 CEST 2009 Command line: root=/dev/sdb1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007d612000 (usable) BIOS-e820: 000000007d612000 - 000000007d698000 (ACPI NVS) BIOS-e820: 000000007d698000 - 000000007e5d1000 (usable) BIOS-e820: 000000007e5d1000 - 000000007e5de000 (reserved) BIOS-e820: 000000007e5de000 - 000000007e693000 (usable) BIOS-e820: 000000007e693000 - 000000007e698000 (ACPI data) BIOS-e820: 000000007e698000 - 000000007e699000 (usable) BIOS-e820: 000000007e699000 - 000000007e6f2000 (ACPI NVS) BIOS-e820: 000000007e6f2000 - 000000007e6ff000 (ACPI data) BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable) BIOS-e820: 000000007e700000 - 000000007f000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7e700 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000007e700000 0000000000 - 007e600000 page 2M 007e600000 - 007e700000 page 4k kernel direct mapping tables up to 7e700000 @ 8000-c000 last_map_addr: 7e700000 end: 7e700000 ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7E6FD038, 0050 (r1 INTEL DG965SS 6AD 1000013) ACPI: FACP 7E6FC000, 0074 (r1 INTEL DG965SS 6AD MSFT 1000013) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7E6F7000, 41AA (r1 INTEL DG965SS 6AD MSFT 1000013) ACPI: FACS 7E699000, 0040 ACPI: APIC 7E6F6000, 0078 (r1 INTEL DG965SS 6AD MSFT 1000013) ACPI: WDDT 7E6F5000, 0040 (r1 INTEL DG965SS 6AD MSFT 1000013) ACPI: MCFG 7E6F4000, 003C (r1 INTEL DG965SS 6AD MSFT 1000013) ACPI: ASF! 7E6F3000, 00A6 (r32 INTEL DG965SS 6AD MSFT 1000013) ACPI: HPET 7E6F2000, 0038 (r1 INTEL DG965SS 6AD MSFT 1000013) ACPI: SSDT 7E697000, 020C (r1 INTEL CpuPm 6AD MSFT 1000013) ACPI: SSDT 7E696000, 0175 (r1 INTEL Cpu0Ist 6AD MSFT 1000013) ACPI: SSDT 7E695000, 0175 (r1 INTEL Cpu1Ist 6AD MSFT 1000013) ACPI: SSDT 7E694000, 0175 (r1 INTEL Cpu2Ist 6AD MSFT 1000013) ACPI: SSDT 7E693000, 0175 (r1 INTEL Cpu3Ist 6AD MSFT 1000013) ACPI: Local APIC address 0xfee00000 (5 early reservations) ==> bootmem [0000000000 - 007e700000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000909fe8] TEXT DATA BSS ==> [0000200000 - 0000909fe8] #3 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000fe200] 000fe200 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000008f 0: 0x00000100 -> 0x0007d612 0: 0x0007d698 -> 0x0007e5d1 0: 0x0007e5de -> 0x0007e693 0: 0x0007e698 -> 0x0007e699 0: 0x0007e6ff -> 0x0007e700 On node 0 totalpages: 517521 DMA zone: 56 pages used for memmap DMA zone: 1905 pages reserved DMA zone: 2022 pages, LIFO batch:0 DMA32 zone: 7025 pages used for memmap DMA32 zone: 506513 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000008f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000007d612000 - 000000007d698000 PM: Registered nosave memory: 000000007e5d1000 - 000000007e5de000 PM: Registered nosave memory: 000000007e693000 - 000000007e698000 PM: Registered nosave memory: 000000007e699000 - 000000007e6f2000 PM: Registered nosave memory: 000000007e6f2000 - 000000007e6ff000 Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Allocating 45056 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508535 Kernel command line: root=/dev/sdb1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 1798.261 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2029668k/2071552k available (4221k kernel code, 1468k absent, 39792k reserved, 1867k data, 372k init) hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3596.52 BogoMIPS (lpj=7193044) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20081204 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3596.40 BogoMIPS (lpj=7192819) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7192.93 BogoMIPS). net_namespace: 896 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at f0000000 - f7ffffff ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0x90200000-0x902fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff] pci 0000:00:02.0: reg 20 io port: [0x2410-0x2417] pci 0000:00:03.0: reg 10 64bit mmio: [0x90326100-0x9032610f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:19.0: reg 10 32bit mmio: [0x90300000-0x9031ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0x90324000-0x90324fff] pci 0000:00:19.0: reg 18 io port: [0x20e0-0x20ff] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x20c0-0x20df] pci 0000:00:1a.1: reg 20 io port: [0x20a0-0x20bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0x90325c00-0x90325fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0x90320000-0x90323fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f] pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90325800-0x90325bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.2: reg 10 io port: [0x2408-0x240f] pci 0000:00:1f.2: reg 14 io port: [0x241c-0x241f] pci 0000:00:1f.2: reg 18 io port: [0x2400-0x2407] pci 0000:00:1f.2: reg 1c io port: [0x2418-0x241b] pci 0000:00:1f.2: reg 20 io port: [0x2020-0x203f] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90325000-0x903257ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0x90326000-0x903260ff] pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f] pci 0000:02:00.0: reg 10 io port: [0x1018-0x101f] pci 0000:02:00.0: reg 14 io port: [0x1024-0x1027] pci 0000:02:00.0: reg 18 io port: [0x1010-0x1017] pci 0000:02:00.0: reg 1c io port: [0x1020-0x1023] pci 0000:02:00.0: reg 20 io port: [0x1000-0x100f] pci 0000:02:00.0: reg 24 32bit mmio: [0x90100000-0x901001ff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: PME# supported from D0 D1 D3hot pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x1000-0x1fff] pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff] pci 0000:06:03.0: reg 10 32bit mmio: [0x90004000-0x900047ff] pci 0000:06:03.0: reg 14 32bit mmio: [0x90000000-0x90003fff] pci 0000:06:03.0: supports D1 D2 pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:06:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff has been reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: 0x1000-0x1fff pci 0000:00:1c.1: MEM window: 0x90100000-0x901fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: disabled pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 mem: [0x0-0x0] pci_bus 0000:01: resource 1 mem: [0x0-0x0] pci_bus 0000:01: resource 2 mem: [0x0-0x0] pci_bus 0000:01: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff] pci_bus 0000:02: resource 2 mem: [0x0-0x0] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 mem: [0x0-0x0] pci_bus 0000:03: resource 1 mem: [0x0-0x0] pci_bus 0000:03: resource 2 mem: [0x0-0x0] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:04: resource 0 mem: [0x0-0x0] pci_bus 0000:04: resource 1 mem: [0x0-0x0] pci_bus 0000:04: resource 2 mem: [0x0-0x0] pci_bus 0000:04: resource 3 mem: [0x0-0x0] pci_bus 0000:05: resource 0 mem: [0x0-0x0] pci_bus 0000:05: resource 1 mem: [0x0-0x0] pci_bus 0000:05: resource 2 mem: [0x0-0x0] pci_bus 0000:05: resource 3 mem: [0x0-0x0] pci_bus 0000:06: resource 0 mem: [0x0-0x0] pci_bus 0000:06: resource 1 mem: [0x90000000-0x900fffff] pci_bus 0000:06: resource 2 mem: [0x0-0x0] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Microcode Update Driver: v2.00 , Peter Oruba HugeTLB registered 2 MB page size, pre-allocated 0 pages fuse init (API version 7.11) msgmni has been set to 3965 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X Real Time Clock Driver v1.12b Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965G Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button (CM) [SLPB] processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 29 for MSI/MSI-X Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 allocated 1280x1024 fb: 0x007df000, bo ffff88007c404200 [drm] DAC-6: set mode 1280x1024 1e Console: switching to colour frame buffer device 160x64 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 on minor 0 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets intelfb: Version 0.9.6 intelfb: 00:02.0: Intel(R) 965G, aperture size 256MB, stolen memory 7932kB intelfb: Cannot remap FB region. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled brd: module loaded loop: module loaded e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 30 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:79:df:11 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 31 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325100 irq 31 ata2: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325180 irq 31 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325300 irq 31 ata6: SATA max UDMA/133 abar m2048@0x90325000 port 0x90325380 irq 31 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata2: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) pata_marvell 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pata_marvell 0000:02:00.0: setting latency timer to 64 scsi6 : pata_marvell scsi7 : pata_marvell ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 17 ata8: DUMMY ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33 ata7.01: HPA detected: current 195369455, native 195371568 ata7.01: ATA-5: WDC WD1000BB-00CAA1, 17.07W17, max UDMA/100 ata7.01: 195369455 sectors, multi 16: LBA ata7.00: configured for UDMA/33 ata7.01: configured for UDMA/100 isa bounce pool size: 16 pages scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg1 type 5 scsi 6:0:1:0: Direct-Access ATA WDC WD1000BB-00C 17.0 PQ: 0 ANSI: 5 sd 6:0:1:0: [sdb] 195369455 512-byte hardware sectors: (100 GB/93.1 GiB) sd 6:0:1:0: [sdb] Write Protect is off sd 6:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 6:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:1:0: [sdb] 195369455 512-byte hardware sectors: (100 GB/93.1 GiB) sd 6:0:1:0: [sdb] Write Protect is off sd 6:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 6:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 6:0:1:0: [sdb] Attached SCSI disk sd 6:0:1:0: Attached scsi generic sg2 type 0 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90325c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90325800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020c0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020a0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18a. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 usb 4-2: new low speed USB device using uhci_hcd and address 2 input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input3 input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input4 input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input5 input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input6 input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7 input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input8 input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input9 usb 4-2: configuration #1 chosen from 1 choice ALSA device list: #0: HDA Intel at 0x90320000 irq 22 TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input10 generic-usb 0003:046D:C050.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0 ReiserFS: sdb1: found reiserfs format "3.6" with standard journal ReiserFS: sdb1: using ordered data mode ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb1: checking transaction log (sdb1) ReiserFS: sdb1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:17. Freeing unused kernel memory: 372k freed udev: starting version 141 ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names Adding 987956k swap on /dev/sda1. Priority:-1 extents:1 across:987956k Adding 15350096k swap on /dev/sdb2. Priority:-2 extents:1 across:15350096k e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! eth0: no IPv6 routers present