Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.29.1-111.fc11.i586 (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.4.0 20090423 (Red Hat 4.4.0-1) (GCC) ) #1 SMP Fri Apr 24 10:42:21 EDT 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003df00000 (usable) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.2 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn = 0x3df00 max_arch_pfn = 0x100000 original variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 992MB, range: 32MB, type UC reg 2, base: 1023MB, range: 1MB, type WB total RAM coverred: 992M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64M num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 992MB, range: 32MB, type UC kernel direct mapping tables up to 373fe000 @ 10000-16000 Using x86 segment limits to approximate NX protection RAMDISK: 37d54000 - 37fef370 Allocated new RAMDISK: 00100000 - 0039b370 Move RAMDISK from 0000000037d54000 - 0000000037fef36f to 00100000 - 0039b36f ACPI Error (tbxfroot-0219): A valid RSDP was not found [20081204] 107MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 00000000 - 373fe000 bootmap 00011000 - 00017e80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000a0bd94] TEXT DATA BSS ==> [0000400000 - 0000a0bd94] #4 [0000a0c000 - 0000a10000] INIT_PG_TABLE ==> [0000a0c000 - 0000a10000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #7 [0000100000 - 000039b370] NEW RAMDISK ==> [0000100000 - 000039b370] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] found SMP MP-table at [c00f44e0] 000f44e0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0003df00 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003df00 On node 0 totalpages: 253583 free_area_init_node: node 0, pgdat c08a8d80, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 215 pages used for memmap HighMem zone: 27179 pages, LIFO batch:7 Using APIC driver default Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 3df00000:c0d00000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Allocating 40960 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251600 Kernel command line: ro root=UUID=2a02712a-71b0-46d0-92ef-9ab5e2ef1dbb rhgb quiet 3 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1499.663 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) allocated 5073600 bytes of page_cgroup please try cgroup_disable=memory option if you don't want Memory: 991332k/1014784k available (3116k kernel code, 22708k reserved, 1897k data, 424k init, 109576k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc08ec000 - 0xc0956000 ( 424 kB) .data : 0xc070b29a - 0xc08e5a18 (1897 kB) .text : 0xc0400000 - 0xc070b29a (3116 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 2999.32 BogoMIPS (lpj=1499663) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 18103 entries in 71 pages ExtINT not setup in hardware but reported by MP table ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08 Brought up 1 CPUs Total of 1 processors activated (2999.32 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3228 bytes CPU0 attaching NULL sched-domain. net_namespace: 1064 bytes Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 5:57:40 Date: 04/29/09 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfaa00, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:00:02.0: reg 14 32bit mmio: [0xe8200000-0xe827ffff] pci 0000:00:02.0: reg 18 io port: [0xe900-0xe907] pci 0000:00:02.0: supports D1 pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x7ffffff] pci 0000:00:02.1: reg 14 32bit mmio: [0x000000-0x07ffff] pci 0000:00:02.1: supports D1 pci 0000:00:1d.0: reg 20 io port: [0xeb00-0xeb1f] pci 0000:00:1d.1: reg 20 io port: [0xed00-0xed1f] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8280000-0xe82803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff] pci 0000:00:1f.5: reg 14 io port: [0xec00-0xec3f] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe8281000-0xe82811ff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe8282000-0xe82820ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:01:07.0: reg 10 io port: [0xcf00-0xcf07] pci 0000:01:07.0: reg 14 io port: [0xd000-0xd007] pci 0000:01:07.0: reg 18 io port: [0xd100-0xd107] pci 0000:01:07.0: reg 1c io port: [0xcc00-0xcc07] pci 0000:01:07.0: reg 20 io port: [0xcd00-0xcd07] pci 0000:01:07.0: reg 24 io port: [0xce00-0xce0f] pci 0000:01:08.0: reg 10 io port: [0xc000-0xc0ff] pci 0000:01:08.1: reg 10 32bit mmio: [0xe8000000-0xe80fffff] pci 0000:01:09.0: reg 10 io port: [0xc400-0xc4ff] pci 0000:01:09.0: reg 14 32bit mmio: [0xe8121000-0xe81210ff] pci 0000:01:09.0: supports D1 D2 pci 0000:01:09.0: PME# supported from D1 D2 D3hot D3cold pci 0000:01:09.0: PME# disabled pci 0000:01:0a.0: reg 10 io port: [0xc800-0xc8ff] pci 0000:01:0a.0: reg 14 32bit mmio: [0xe8120000-0xe81200ff] pci 0000:01:0a.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:0a.0: supports D1 D2 pci 0000:01:0a.0: PME# supported from D1 D2 D3hot D3cold pci 0000:01:0a.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8000000-0xe81fffff] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:24c0] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19 pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18 pci 0000:00:1d.7: PCI->APIC IRQ transform: INT D -> IRQ 23 pci 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 17 pci 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 17 pci 0000:01:07.0: PCI->APIC IRQ transform: INT A -> IRQ 17 pci 0000:01:08.0: PCI->APIC IRQ transform: INT A -> IRQ 16 pci 0000:01:09.0: PCI->APIC IRQ transform: INT A -> IRQ 18 pci 0000:01:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 19 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0xc000-0xdfff pci 0000:00:1e.0: MEM window: 0xe8000000-0xe81fffff pci 0000:00:1e.0: PREFETCH window: 0x00000048000000-0x000000480fffff pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe81fffff] pci_bus 0000:01: resource 2 mem: [0x48000000-0x480fffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2668k freed platform rtc_cmos: registered platform RTC device (no PNP device found) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) audit: initializing netlink socket (disabled) type=2000 audit(1240984659.535:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1728 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855GM Chipset agpgart-intel 0000:00:00.0: detected 32636K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 0000:01:07.0: ttyS2 at I/O 0xcf00 (irq = 17) is a 16550A 0000:01:07.0: ttyS3 at I/O 0xd000 (irq = 17) is a 16550A Couldn't register serial port 0000:01:07.0: -28 brd: module loaded loop: module loaded Fixed MDIO Bus: probed input: Macintosh mouse button emulation as /devices/virtual/input/input0 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0G1, max UDMA/100 ata1.00: 39070080 sectors, multi 16: LBA ata1.00: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-2 00H1 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8280000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29.1-111.fc11.i586 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eb00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29.1-111.fc11.i586 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ed00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29.1-111.fc11.i586 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29.1-111.fc11.i586 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (15856 buckets, 63424 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 5:138:973 Initalizing network drop monitor service Freeing unused kernel memory: 424k freed Write protecting the kernel read-only data: 1448k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 psmouse serio1: ID: 10 00 64<6>EXT4-fs: INFO: recovery required on readonly filesystem. EXT4-fs: write access will be enabled during recovery. EXT4-fs: barriers enabled input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2 kjournald2 starting: pid 52, dev sda2:8, commit interval 5 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: recovery complete. EXT4-fs: mounted filesystem sda2 with ordered data mode SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1240984662.390:2): selinux=0 auid=4294967295 ses=4294967295 udev: starting version 141 input: PC Speaker as /devices/platform/pcspkr/input/input3 intel_rng: FWH not detected 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:01:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too 8139too Fast Ethernet driver 0.9.28 eth0: RealTek RTL8139 at 0xf7d68000, 00:20:dc:04:62:8e, IRQ 18 eth0: Identified 8139 chip type 'RTL-8100B/8139D' r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:0a.0: no PCI Express capability eth1: RTL8169sc/8110sc at 0xf7c3e000, 00:20:dc:ff:62:8d, XID 18000000 IRQ 19 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50928 usecs intel8x0: clocking to 48000 device-mapper: multipath: version 1.0.5 loaded EXT4 FS on sda2, internal journal on sda2:8 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. swap_cgroup: uses 2000 bytes of vmalloc for pointer array space and 2048000 bytes to hold mem_cgroup pointers on swap swap_cgroup can be disabled by noswapaccount boot option. Adding 2047992k swap on /dev/sda3. Priority:-1 extents:1 across:2047992k p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available NET: Registered protocol family 10 lo: Disabled Privacy Extensions RPC: Registered udp transport module. RPC: Registered tcp transport module. r8169: eth1: link up r8169: eth1: link up eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready eth1: no IPv6 routers present mtrr: no MTRR for e0000000,8000000 found