Linux version 2.6.29.1 (root@N5) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #12 SMP Wed Apr 8 12:16:18 CEST 2009 Command line: root=/dev/sda3 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007dcf4000 (usable) BIOS-e820: 000000007dcf4000 - 000000007def5000 (ACPI NVS) BIOS-e820: 000000007def5000 - 000000007eec3000 (ACPI data) BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS) BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data) BIOS-e820: 000000007eec8000 - 000000007eeca000 (ACPI NVS) BIOS-e820: 000000007eeca000 - 000000007eecb000 (ACPI data) BIOS-e820: 000000007eecb000 - 000000007eedf000 (ACPI NVS) BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data) BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved) BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data) BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7dcf4 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-000000007dcf4000 0000000000 - 007dc00000 page 2M 007dc00000 - 007dcf4000 page 4k kernel direct mapping tables up to 7dcf4000 @ 8000-c000 last_map_addr: 7dcf4000 end: 7dcf4000 ACPI: RSDP 000FE020, 0024 (r2 APPLE ) ACPI: XSDT 7EEEE1C0, 0084 (r1 APPLE Apple00 8E 1000013) ACPI: FACP 7EEEC000, 00F4 (r3 APPLE Apple00 8E Loki 5F) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT 7EEE1000, 45B6 (r1 APPLE MacBook 30001 INTL 20061109) ACPI: FACS 7EECB000, 0040 ACPI: HPET 7EEEB000, 0038 (r1 APPLE Apple00 1 Loki 5F) ACPI: APIC 7EEEA000, 0068 (r1 APPLE Apple00 1 Loki 5F) ACPI: MCFG 7EEE9000, 003C (r1 APPLE Apple00 1 Loki 5F) ACPI: ASF! 7EEE8000, 00A5 (r32 APPLE Apple00 1 Loki 5F) ACPI: SBST 7EEE7000, 0030 (r1 APPLE Apple00 1 Loki 5F) ACPI: ECDT 7EEE6000, 0053 (r1 APPLE Apple00 1 Loki 5F) ACPI: SSDT 7EEC7000, 04DC (r1 APPLE CpuPm 3000 INTL 20061109) ACPI: SSDT 7EEC6000, 025F (r1 APPLE Cpu0Tst 3000 INTL 20061109) ACPI: SSDT 7EEC5000, 00A6 (r1 APPLE Cpu1Tst 3000 INTL 20061109) ACPI: SSDT 7EEE0000, 0544 (r1 SataRe SataPri 1000 INTL 20061109) ACPI: SSDT 7EEDF000, 0477 (r1 SataRe SataSec 1000 INTL 20061109) ACPI: Local APIC address 0xfee00000 (5 early reservations) ==> bootmem [0000000000 - 007dcf4000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000059314c] TEXT DATA BSS ==> [0000200000 - 000059314c] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007dcf4 On node 0 totalpages: 515219 DMA zone: 56 pages used for memmap DMA zone: 1016 pages reserved DMA zone: 2927 pages, LIFO batch:0 DMA32 zone: 6990 pages used for memmap DMA32 zone: 504230 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 49152 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 507157 Kernel command line: root=/dev/sda3 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1995.228 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 2024728k/2061264k available (1941k kernel code, 388k absent, 35644k reserved, 862k data, 376k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.45 BogoMIPS (lpj=1995228) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Freeing SMP alternatives: 20k freed ACPI: Core revision 20081204 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.80 BogoMIPS (lpj=1994903) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7980.26 BogoMIPS). net_namespace: 968 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in E820 PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0x90100000-0x901fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff] pci 0000:00:02.0: reg 20 io port: [0x3110-0x3117] pci 0000:00:02.1: reg 10 64bit mmio: [0x90200000-0x902fffff] pci 0000:00:1a.0: reg 20 io port: [0x30c0-0x30df] pci 0000:00:1a.1: reg 20 io port: [0x30a0-0x30bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0x90704c00-0x90704fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0x90700000-0x90703fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90704800-0x90704bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) pci 0000:00:1f.1: reg 10 io port: [0x3108-0x310f] pci 0000:00:1f.1: reg 14 io port: [0x3124-0x3127] pci 0000:00:1f.1: reg 18 io port: [0x3100-0x3107] pci 0000:00:1f.1: reg 1c io port: [0x3120-0x3123] pci 0000:00:1f.1: reg 20 io port: [0x30e0-0x30ef] pci 0000:00:1f.2: reg 10 io port: [0x30f8-0x30ff] pci 0000:00:1f.2: reg 14 io port: [0x311c-0x311f] pci 0000:00:1f.2: reg 18 io port: [0x30f0-0x30f7] pci 0000:00:1f.2: reg 1c io port: [0x3118-0x311b] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x302f] pci 0000:00:1f.2: reg 24 io port: [0x4000-0x400f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0x90705000-0x907050ff] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] pci 0000:00:1c.0: bridge 32bit mmio: [0x90600000-0x906fffff] pci 0000:02:00.0: reg 10 64bit mmio: [0x90500000-0x90503fff] pci 0000:02:00.0: reg 18 64bit mmio: [0x90000000-0x900fffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.4: bridge 32bit mmio: [0x90500000-0x905fffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x90000000-0x900fffff] pci 0000:03:00.0: reg 10 64bit mmio: [0x90400000-0x90403fff] pci 0000:03:00.0: reg 18 io port: [0x2000-0x20ff] pci 0000:03:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.5: bridge 32bit mmio: [0x90400000-0x904fffff] pci 0000:04:03.0: reg 10 32bit mmio: [0x90300000-0x90300fff] pci 0000:04:03.0: supports D1 D2 pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:03.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0x90300000-0x903fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved system 00:07: ioport range 0x680-0x69f has been reserved system 00:07: ioport range 0x800-0x80f has been reserved system 00:07: ioport range 0x810-0x817 has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x500-0x53f has been reserved system 00:07: ioport range 0x1640-0x164f has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0x90600000-0x906fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0x90500000-0x905fffff pci 0000:00:1c.4: PREFETCH window: 0x00000090000000-0x000000900fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.5: IO window: 0x2000-0x2fff pci 0000:00:1c.5: MEM window: 0x90400000-0x904fffff pci 0000:00:1c.5: PREFETCH window: 0x00000090800000-0x000000908fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0x90300000-0x903fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: enabling device (0000 -> 0002) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: power state changed by ACPI to D0 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 mem: [0x0-0x0] pci_bus 0000:01: resource 1 mem: [0x90600000-0x906fffff] pci_bus 0000:01: resource 2 mem: [0x0-0x0] pci_bus 0000:01: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 mem: [0x0-0x0] pci_bus 0000:02: resource 1 mem: [0x90500000-0x905fffff] pci_bus 0000:02: resource 2 mem: [0x90000000-0x900fffff] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] pci_bus 0000:03: resource 1 mem: [0x90400000-0x904fffff] pci_bus 0000:03: resource 2 mem: [0x90800000-0x908fffff] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:04: resource 0 mem: [0x0-0x0] pci_bus 0000:04: resource 1 mem: [0x90300000-0x903fffff] pci_bus 0000:04: resource 2 mem: [0x0-0x0] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered msgmni has been set to 3955 io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.5: setting latency timer to 64 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 15868K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 Driver 'sd' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: power state changed by ACPI to D0 ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30e0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30e8 irq 15 ata1.00: ATAPI: MATSHITACD-RW CW-8221, GA0K, max UDMA/33 ata1.00: configured for UDMA/33 isa bounce pool size: 16 pages scsi 0:0:0:0: CD-ROM MATSHITA CD-RW CW-8221 GA0K PQ: 0 ANSI: 5 scsi 0:0:0:0: Attached scsi generic sg0 type 5 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x30f8 ctl 0x311c bmdma 0x3020 irq 18 ata4: SATA max UDMA/133 cmd 0x30f0 ctl 0x3118 bmdma 0x3028 irq 18 ata3.00: ATA-8: FUJITSU MHY2120BH, 0081000D, max UDMA/100 ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2120B 0081 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 2:0:0:0: [sda] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg1 type 0 PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:3. Freeing unused kernel memory: 376k freed Write protecting the kernel read-only data: 2592k NET: Registered protocol family 1 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' ACPI: AC Adapter [ADP1] (on-line) input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf] ACPI: Device needs an ACPI driver ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /class/input/input2 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input4 Real Time Clock Driver v1.12b sky2 driver version 1.22 sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3 sky2 0000:03:00.0: Marvell Yukon 88E8058 Gigabit Ethernet Controller Part Number: Yukon 88E8058 Engineering Level: Rev. 1.3 Manufacturer: Marvell sky2 eth0: addr 00:1b:63:b8:0e:08 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT 7EEC9C18, 02BC (r1 APPLE Cpu0Ist 3000 INTL 20061109) ACPI: SSDT 7EEC8C98, 0222 (r1 APPLE Cpu0Cst 3001 INTL 20061109) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7EEC9F18, 00C8 (r1 APPLE Cpu1Ist 3000 INTL 20061109) ACPI: SSDT 7EEC8F18, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20061109) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) Marking TSC unstable due to TSC halts in idle Driver 'sr' needs updating - please use bus_type methods usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci1394 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90300000-903007ff] Max Packet=[2048] IR/IT contexts=[8/8] applesmc: Apple MacBook (v3) detected: applesmc: - Model with accelerometer applesmc: - Model without light sensors and backlight applesmc: - Model with 10 temperature sensors Clocksource tsc unstable (delta = -94051576 ns) applesmc: device successfully initialized (0xe0, 0x00). applesmc: device successfully initialized. applesmc: 1 fans found. input: applesmc as /class/input/input5 applesmc: driver successfully loaded. uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 20, io base 0x000030c0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 16, io base 0x000030a0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003040 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected wl: module license '' taints kernel. wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 wl 0000:02:00.0: setting latency timer to 64 eth1 (wl): not using net_device_ops yet eth1: Broadcom BCM4328 802.11 Wireless Controller 5.10.79.10 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 7-4: new high speed USB device using ehci_hcd and address 2 usb 7-4: configuration #1 chosen from 1 choice usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e52fffe3d912c] input: HID 05ac:1000 as /class/input/input6 generic-usb 0003:05AC:1000.0001: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0 input: HID 05ac:1000 as /class/input/input7 generic-usb 0003:05AC:1000.0002: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 5-1: new low speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice apple 0003:05AC:8242.0003: claimed by neither input, hiddev nor hidraw apple 0003:05AC:8242.0003: hw start failed usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input8 apple 0003:05AC:022A.0004: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0 input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input9 apple 0003:05AC:022A.0005: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2 appletouch: Geyser mode initialized. input: appletouch as /class/input/input10 usbcore: registered new interface driver appletouch usb 7-4: firmware: requesting isight.fw usbcore: registered new interface driver isight_firmware usb 7-4: USB disconnect, address 2 Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) usb 7-4: new high speed USB device using ehci_hcd and address 5 usb 7-4: configuration #1 chosen from 1 choice uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. EXT3 FS on sda3, internal journal Adding 2097124k swap on /dev/sda4. Priority:-1 extents:1 across:2097124k ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) sky2 eth0: enabling interface sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx NET: Registered protocol family 17 Bluetooth: Core ver 2.14 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 usb 1-1: USB disconnect, address 2 bluetoothd[2657]: segfault at 7f47891ddec6 ip 00007f47891ddec6 sp 00007fff926fb728 error 14 in serial.so[7f4788ff5000+200000] usb 1-1: new full speed USB device using uhci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice Bluetooth: Generic Bluetooth USB driver ver 0.4 usbcore: registered new interface driver btusb Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [drm] Initialized drm 1.1.0 20060810 [drm:drm_init] [drm:drm_get_dev] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm:drm_get_minor] [drm:drm_get_minor] new minor assigned 64 [drm:drm_get_minor] [drm:drm_get_minor] new minor assigned 0 [drm:i915_init_phys_hws] Enabled hardware status page [drm:intel_opregion_init] graphic opregion physical addr: 0x0 [drm:intel_opregion_init] ACPI OpRegion not supported! [drm:drm_agp_bind_pages] [drm:parse_panel_data] Found panel mode in BIOS VBT tables: [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 71000 1280 1328 1360 1440 800 803 809 823 0x8 0x0 [drm:drm_irq_install] irq=16 [drm:intel_modeset_init] 2 display pipes available. [drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:drm_sysfs_connector_add] adding "LVDS-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:drm_sysfs_connector_add] adding "DVI-D-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:intel_sdvo_init] SDVOB device VID/DID: 04:AA.03, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N [drm:intel_sdvo_read_byte] i2c transfer returned -6 [drm:intel_sdvo_init] No SDVO device found on SDVOC [drm:drm_sysfs_connector_add] adding "SVIDEO-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:drm_helper_probe_single_connector_modes] VGA-1 [drm:drm_helper_probe_single_connector_modes] VGA-1 is disconnected [drm:drm_helper_probe_single_connector_modes] LVDS-1 [drm:drm_helper_probe_single_connector_modes] Probed modes for LVDS-1 [drm:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 59908 71000 1280 1328 1360 1440 800 803 809 823 0x48 0xa [drm:drm_helper_probe_single_connector_modes] DVI-D-1 [drm:intel_sdvo_detect] SDVO response 1 0 i2c-adapter i2c-3: unable to read EDID block. pci 0000:00:02.0: DVI-D-1: no EDID data [drm:drm_helper_probe_single_connector_modes] SVIDEO-1 [drm:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:intel_crtc_mode_set] Mode for pipe A: [drm:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0 [drm:intel_pipe_set_base] No FB bound [drm] TV-15: set mode NTSC 480i 0 [drm:intel_tv_detect_type] No TV connection detected [drm:drm_helper_probe_single_connector_modes] SVIDEO-1 is disconnected [drm:drm_setup_crtcs] [drm:drm_enable_connectors] connector 5 enabled? no [drm:drm_enable_connectors] connector 7 enabled? yes [drm:drm_enable_connectors] connector 12 enabled? yes [drm:drm_enable_connectors] connector 14 enabled? no [drm:drm_target_preferred] looking for preferred mode on connector 7 [drm:drm_target_preferred] found mode 1280x800 [drm:drm_target_preferred] looking for preferred mode on connector 12 [drm:drm_target_preferred] found mode none [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [drm:drm_setup_crtcs] desired mode 1280x800 set on crtc 4 [drm:intelfb_probe] [drm:intelfb_single_fb_probe] [drm:intelfb_single_fb_probe] creating new fb (console size 1280x800, buffer size 1280x800) [drm:drm_agp_bind_pages] allocated 1280x800 fb: 0x00fdf000, bo ffff88007a788240 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 on minor 0