X.Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.18.8-xen x86_64 Current Operating System: Linux x-g45b 2.6.29 #1 SMP Fri Apr 3 10:09:05 CST 2009 x86_64 Build Date: 03 April 2009 11:47:41AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/opt/X11R7/var/log/Xorg.0.log", Time: Sat Apr 4 01:05:16 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "AllowEmptyInput" "false" (==) Automatically adding devices (==) Automatically enabling devices (**) FontPath set to: unix/:7100, /opt/X11R7/lib/X11/fonts/misc/, /opt/X11R7/lib/X11/fonts/TTF/, /opt/X11R7/lib/X11/fonts/OTF, /opt/X11R7/lib/X11/fonts/Type1/, /opt/X11R7/lib/X11/fonts/100dpi/, /opt/X11R7/lib/X11/fonts/75dpi/, built-ins (**) ModulePath set to "/opt/X11R7/lib/xorg/modules" (II) Loader magic: 0xd60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation unknown chipset (0x2e22) rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000cc00/8 (--) PCI: (0@0:2:1) Intel Corporation unknown chipset (0x2e23) rev 3, Mem @ 0xfe800000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "dbe" (II) Loading /opt/X11R7/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /opt/X11R7/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /opt/X11R7/lib/xorg/modules/linux//libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.0.2 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "glx" (II) Loading /opt/X11R7/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "freetype" (WW) Warning, couldn't open module freetype (II) UnloadModule: "freetype" (EE) Failed to load module "freetype" (module does not exist, 0) (II) LoadModule: "type1" (WW) Warning, couldn't open module type1 (II) UnloadModule: "type1" (EE) Failed to load module "type1" (module does not exist, 0) (II) LoadModule: "dri" (II) Loading /opt/X11R7/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "record" (II) Loading /opt/X11R7/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri2" (II) Loading /opt/X11R7/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /opt/X11R7/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.6.99 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "evdev" (II) Loading /opt/X11R7/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.2.99 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /opt/X11R7/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "AccelMethod" "EXA" (**) intel(0): Option "ModeDebug" "on" (II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43 (--) intel(0): Chipset: "G45/G43" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFE400000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (**) intel(0): Using EXA for acceleration (II) intel(0): Hardware state on X startup: (II) intel(0): DumpRegsBegin (II) intel(0): CHDECMISC: 0x0000002c (XOR bank/rank, ch2 enh disabled, ch1 enh enabled, ch0 enh enabled, flex disabled, ep not present) (II) intel(0): C0DRB0: 0x00100008 (0x0008) (II) intel(0): C0DRB1: 0x00100010 (0x0010) (II) intel(0): C0DRB2: 0x00100010 (0x0010) (II) intel(0): C0DRB3: 0x02020010 (0x0010) (II) intel(0): C1DRB0: 0x00100008 (0x0008) (II) intel(0): C1DRB1: 0x00100010 (0x0010) (II) intel(0): C1DRB2: 0x00100010 (0x0010) (II) intel(0): C1DRB3: 0x02020010 (0x0010) (II) intel(0): C0DRA01: 0x00000202 (0x0202) (II) intel(0): C0DRA23: 0x00000000 (0x0000) (II) intel(0): C1DRA01: 0x00000202 (0x0202) (II) intel(0): C1DRA23: 0x00000000 (0x0000) (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2) (II) intel(0): DPLL_TEST: 0x00010001 () (II) intel(0): CACHE_MODE_0: 0x00006820 (II) intel(0): D_STATE: 0x00000000 (II) intel(0): DSPCLK_GATE_D: 0x00040000 (clock gates disabled: DSSUNIT) (II) intel(0): RENCLK_GATE_D1: 0x00000000 (II) intel(0): RENCLK_GATE_D2: 0x00000000 (II) intel(0): SDVOB: 0x0000089c (disabled, pipe A, stall disabled, detected) (II) intel(0): SDVOC: 0x80000adc (enabled, pipe A, stall disabled, detected) (II) intel(0): SDVOUDI: 0x00000000 (II) intel(0): DSPARB: 0x00000000 (II) intel(0): DSPFW1: 0x3f8f0f0f (II) intel(0): DSPFW2: 0x150f0f0f (II) intel(0): DSPFW3: 0x00000000 (II) intel(0): ADPA: 0x00008c18 (disabled, pipe A, +hsync, +vsync) (II) intel(0): LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel) (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOB: 0x0000089c (disabled, pipe A, no stall, +hsync, +vsync) (II) intel(0): DVOC: 0x80000adc (enabled, pipe A, no stall, +hsync, +vsync) (II) intel(0): DVOA_SRCDIM: 0x00000000 (II) intel(0): DVOB_SRCDIM: 0x00000000 (II) intel(0): DVOC_SRCDIM: 0x00000000 (II) intel(0): PP_CONTROL: 0x00000000 (power target: off) (II) intel(0): PP_STATUS: 0x00000000 (off, not ready, sequencing idle) (II) intel(0): PP_ON_DELAYS: 0x00000000 (II) intel(0): PP_OFF_DELAYS: 0x00000000 (II) intel(0): PP_DIVISOR: 0x00000000 (II) intel(0): PFIT_CONTROL: 0x00000000 (II) intel(0): PFIT_PGM_RATIOS: 0x00000000 (II) intel(0): PORT_HOTPLUG_EN: 0x00000120 (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000 (II) intel(0): DSPACNTR: 0x48000000 (disabled, pipe A) (II) intel(0): DSPASTRIDE: 0x00000280 (640 bytes) (II) intel(0): DSPAPOS: 0x00000000 (0, 0) (II) intel(0): DSPASIZE: 0x00000000 (1, 1) (II) intel(0): DSPABASE: 0x00000000 (II) intel(0): DSPASURF: 0x00000000 (II) intel(0): DSPATILEOFF: 0x00000000 (II) intel(0): PIPEACONF: 0xc0000000 (enabled, active) (II) intel(0): PIPEASRC: 0x027f018f (640, 400) (II) intel(0): PIPEASTAT: 0x80000206 (status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS) (II) intel(0): FPA0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_A: 0xd4800c00 (enabled, dvo, default clock, DAC/serial mode, p1 = 8, p2 = 10) (II) intel(0): DPLL_A_MD: 0x00000003 (II) intel(0): HTOTAL_A: 0x031f027f (640 active, 800 total) (II) intel(0): HBLANK_A: 0x031f027f (640 start, 800 end) (II) intel(0): HSYNC_A: 0x02ef028f (656 start, 752 end) (II) intel(0): VTOTAL_A: 0x020c018f (400 active, 525 total) (II) intel(0): VBLANK_A: 0x01e401b7 (440 start, 485 end) (II) intel(0): VSYNC_A: 0x01c301c1 (450 start, 452 end) (II) intel(0): BCLRPAT_A: 0x00000000 (II) intel(0): VSYNCSHIFT_A: 0x00000000 (II) intel(0): DSPBCNTR: 0x01000000 (disabled, pipe B) (II) intel(0): DSPBSTRIDE: 0x00000000 (0 bytes) (II) intel(0): DSPBPOS: 0x00000000 (0, 0) (II) intel(0): DSPBSIZE: 0x00000000 (1, 1) (II) intel(0): DSPBBASE: 0x00000000 (II) intel(0): DSPBSURF: 0x00000000 (II) intel(0): DSPBTILEOFF: 0x00000000 (II) intel(0): PIPEBCONF: 0x00000000 (disabled, inactive) (II) intel(0): PIPEBSRC: 0x027f01df (640, 480) (II) intel(0): PIPEBSTAT: 0x00000000 (status:) (II) intel(0): FPB0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): FPB1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_B: 0x04020c00 (disabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 2, p2 = 10) (II) intel(0): DPLL_B_MD: 0x00000003 (II) intel(0): HTOTAL_B: 0x031f027f (640 active, 800 total) (II) intel(0): HBLANK_B: 0x03170287 (648 start, 792 end) (II) intel(0): HSYNC_B: 0x02ef028f (656 start, 752 end) (II) intel(0): VTOTAL_B: 0x020c01df (480 active, 525 total) (II) intel(0): VBLANK_B: 0x020401e7 (488 start, 517 end) (II) intel(0): VSYNC_B: 0x01eb01e9 (490 start, 492 end) (II) intel(0): BCLRPAT_B: 0x00000000 (II) intel(0): VSYNCSHIFT_B: 0x00000000 (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (II) intel(0): VCLK_POST_DIV: 0x00020002 (II) intel(0): VGACNTRL: 0x0224008e (enabled) (II) intel(0): TV_CTL: 0x00000010 (II) intel(0): TV_DAC: 0x00000000 (II) intel(0): TV_CSC_Y: 0x00000000 (II) intel(0): TV_CSC_Y2: 0x00000000 (II) intel(0): TV_CSC_U: 0x00000000 (II) intel(0): TV_CSC_U2: 0x00000000 (II) intel(0): TV_CSC_V: 0x00000000 (II) intel(0): TV_CSC_V2: 0x00000000 (II) intel(0): TV_CLR_KNOBS: 0x00000000 (II) intel(0): TV_CLR_LEVEL: 0x00000000 (II) intel(0): TV_H_CTL_1: 0x00000000 (II) intel(0): TV_H_CTL_2: 0x00000000 (II) intel(0): TV_H_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_1: 0x00000000 (II) intel(0): TV_V_CTL_2: 0x00000000 (II) intel(0): TV_V_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_4: 0x00000000 (II) intel(0): TV_V_CTL_5: 0x00000000 (II) intel(0): TV_V_CTL_6: 0x00000000 (II) intel(0): TV_V_CTL_7: 0x00000000 (II) intel(0): TV_SC_CTL_1: 0x00000000 (II) intel(0): TV_SC_CTL_2: 0x00000000 (II) intel(0): TV_SC_CTL_3: 0x00000000 (II) intel(0): TV_WIN_POS: 0x00000000 (II) intel(0): TV_WIN_SIZE: 0x00000000 (II) intel(0): TV_FILTER_CTL_1: 0x00000000 (II) intel(0): TV_FILTER_CTL_2: 0x00000000 (II) intel(0): TV_FILTER_CTL_3: 0x00000000 (II) intel(0): TV_CC_CONTROL: 0x00000000 (II) intel(0): TV_CC_DATA: 0x00000000 (II) intel(0): TV_H_LUMA_0: 0x00000000 (II) intel(0): TV_H_LUMA_59: 0x00000000 (II) intel(0): TV_H_CHROMA_0: 0x00000000 (II) intel(0): TV_H_CHROMA_59: 0x00000000 (II) intel(0): FBC_CFB_BASE: 0xffffffff (II) intel(0): FBC_LL_BASE: 0xffffffff (II) intel(0): FBC_CONTROL: 0xffffffff (II) intel(0): FBC_COMMAND: 0xffffffff (II) intel(0): FBC_STATUS: 0xffffffff (II) intel(0): FBC_CONTROL2: 0xffffffff (II) intel(0): FBC_FENCE_OFF: 0xffffffff (II) intel(0): FBC_MOD_NUM: 0xffffffff (II) intel(0): MI_MODE: 0x00000200 (II) intel(0): MI_ARB_STATE: 0x00000040 (II) intel(0): MI_RDRET_STATE: 0x00000000 (II) intel(0): ECOSKPD: 0x00000307 (II) intel(0): DP_B: 0x0000001c (II) intel(0): DPB_AUX_CH_CTL: 0x00050000 (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_C: 0x0000001c (II) intel(0): DPC_AUX_CH_CTL: 0x00050000 (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_D: 0x00000018 (II) intel(0): DPD_AUX_CH_CTL: 0x00050000 (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000 (II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end) (II) intel(0): pipe A dot 25200 n 3 m1 17 m2 8 p1 8 p2 10 (II) intel(0): pipe B dot 100800 n 3 m1 17 m2 8 p1 2 p2 10 (II) intel(0): DumpRegsEnd (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): Output HDMI-1 has no monitor section (II) intel(0): I2C bus "HDMIDDC_B" initialized. (II) intel(0): HDMI output 1 detected (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output HDMI-2 has no monitor section (II) intel(0): I2C bus "HDMIDDC_C" initialized. (II) intel(0): HDMI output 2 detected (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): EDID for output VGA (II) intel(0): EDID for output HDMI-1 (II) intel(0): I2C device "HDMIDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0. (II) intel(0): HDMI monitor detected on HDMI-2 (II) intel(0): EDID for output HDMI-2 (II) intel(0): Manufacturer: DEL Model: a02c Serial#: 810700371 (II) intel(0): Year: 2008 Week: 24 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: StandBy Suspend Off (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.674 redY: 0.319 greenX: 0.188 greenY: 0.706 (II) intel(0): blueX: 0.148 blueY: 0.064 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported VESA Video Modes: (II) intel(0): 720x400@70Hz (II) intel(0): 640x480@60Hz (II) intel(0): 640x480@75Hz (II) intel(0): 800x600@60Hz (II) intel(0): 800x600@75Hz (II) intel(0): 1024x768@60Hz (II) intel(0): 1024x768@75Hz (II) intel(0): 1280x1024@75Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported Future Video Modes: (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) intel(0): Supported additional Video Mode: (II) intel(0): clock: 154.0 MHz Image Size: 519 x 324 mm (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) intel(0): Serial No: G293H86B0RNS (II) intel(0): Monitor name: DELL 2408WFP (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) intel(0): Number of EDID sections to follow: 1 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0010ac2ca0534e5230 (II) intel(0): 1812010380342078eab325ac5130b426 (II) intel(0): 105054a54b008180a940714f01010101 (II) intel(0): 010101010101283c80a070b023403020 (II) intel(0): 360007442100001a000000ff00473239 (II) intel(0): 334838364230524e530a000000fc0044 (II) intel(0): 454c4c20323430385746500a000000fd (II) intel(0): 00384c1e5311000a20202020202001d4 (II) intel(0): 02031bf1489005040302071601230907 (II) intel(0): 0765030c00100083010000023a801871 (II) intel(0): 382d40582c450007442100001e011d80 (II) intel(0): 18711c1620582c250007442100009e01 (II) intel(0): 1d007251d01e206e2855000744210000 (II) intel(0): 1e8c0ad08a20e02d10103e9600074421 (II) intel(0): 00001800000000000000000000000000 (II) intel(0): 00000000000000000000000000000047 (II) intel(0): EDID vendor "DEL", prod id 41004 (II) intel(0): Printing probed modes for output HDMI-2 (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Output VGA disconnected (II) intel(0): Output HDMI-1 disconnected (II) intel(0): Output HDMI-2 connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output HDMI-2 using initial mode 1920x1200 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 32764 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /opt/X11R7/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /opt/X11R7/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x38000020 (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x10440000 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 482816 total, 1 used (II) intel(0): I830CheckAvailableMemory: 1931260 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 13, (OK) drmOpenByBusid: drmOpenMinor returns 13 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] loaded kernel module for "i915" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xfe400000 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 50331648 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d000000 (pgoffset 53248) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0cffffff: DRI memory manager (180228 kB) (II) intel(0): 0x0d000000-0x0fffffff: exa offscreen (49152 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x0301ffff: depth buffer (16384 kB) Y tiled (II) intel(0): 0x03020000-0x0401ffff: back buffer (16384 kB) X tiled (II) intel(0): 0x04020000-0x0501ffff: front buffer (16384 kB) X tiled (II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB) (II) intel(0): 0x0d000000: end of memory manager (II) intel(0): Mode for pipe A: (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): chosen: dotclock 153600 vco 1536000 ((m 80, m1 12, m2 8), n 3, (p 10, p1 1, p2 10)) (II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0xd4020000 (II) intel(0): [drm] mapped back buffer at 0xd3020000, handle = 0xd3020000 (II) intel(0): [drm] mapped depth buffer at 0xd2020000, handle = 0xd2020000 (II) intel(0): Hardware state at EnterVT: (II) intel(0): DumpRegsBegin (II) intel(0): CHDECMISC: 0x0000002c (XOR bank/rank, ch2 enh disabled, ch1 enh enabled, ch0 enh enabled, flex disabled, ep not present) (II) intel(0): C0DRB0: 0x00100008 (0x0008) (II) intel(0): C0DRB1: 0x00100010 (0x0010) (II) intel(0): C0DRB2: 0x00100010 (0x0010) (II) intel(0): C0DRB3: 0x02020010 (0x0010) (II) intel(0): C1DRB0: 0x00100008 (0x0008) (II) intel(0): C1DRB1: 0x00100010 (0x0010) (II) intel(0): C1DRB2: 0x00100010 (0x0010) (II) intel(0): C1DRB3: 0x02020010 (0x0010) (II) intel(0): C0DRA01: 0x00000202 (0x0202) (II) intel(0): C0DRA23: 0x00000000 (0x0000) (II) intel(0): C1DRA01: 0x00000202 (0x0202) (II) intel(0): C1DRA23: 0x00000000 (0x0000) (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2) (II) intel(0): DPLL_TEST: 0x00010001 () (II) intel(0): CACHE_MODE_0: 0x00006820 (II) intel(0): D_STATE: 0x00000000 (II) intel(0): DSPCLK_GATE_D: 0x1000000c (clock gates disabled: VRHUNIT OVRUNIT OVCUNIT) (II) intel(0): RENCLK_GATE_D1: 0x00000000 (II) intel(0): RENCLK_GATE_D2: 0x000002c0 (II) intel(0): SDVOB: 0x0000089c (disabled, pipe A, stall disabled, detected) (II) intel(0): SDVOC: 0x800008dc (enabled, pipe A, stall disabled, detected) (II) intel(0): SDVOUDI: 0x00000000 (II) intel(0): DSPARB: 0x00000000 (II) intel(0): DSPFW1: 0x3f8f0f0f (II) intel(0): DSPFW2: 0x150f0f0f (II) intel(0): DSPFW3: 0x00000000 (II) intel(0): ADPA: 0x00008c18 (disabled, pipe A, +hsync, +vsync) (II) intel(0): LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel) (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOB: 0x0000089c (disabled, pipe A, no stall, +hsync, +vsync) (II) intel(0): DVOC: 0x800008dc (enabled, pipe A, no stall, +hsync, +vsync) (II) intel(0): DVOA_SRCDIM: 0x00000000 (II) intel(0): DVOB_SRCDIM: 0x00000000 (II) intel(0): DVOC_SRCDIM: 0x00000000 (II) intel(0): PP_CONTROL: 0x00000000 (power target: off) (II) intel(0): PP_STATUS: 0x00000000 (off, not ready, sequencing idle) (II) intel(0): PP_ON_DELAYS: 0x00000000 (II) intel(0): PP_OFF_DELAYS: 0x00000000 (II) intel(0): PP_DIVISOR: 0x00000000 (II) intel(0): PFIT_CONTROL: 0x00000000 (II) intel(0): PFIT_PGM_RATIOS: 0x00000000 (II) intel(0): PORT_HOTPLUG_EN: 0x38000020 (II) intel(0): PORT_HOTPLUG_STAT: 0x10440000 (II) intel(0): DSPACNTR: 0xd8000400 (enabled, pipe A) (II) intel(0): DSPASTRIDE: 0x00002000 (8192 bytes) (II) intel(0): DSPAPOS: 0x00000000 (0, 0) (II) intel(0): DSPASIZE: 0x00000000 (1, 1) (II) intel(0): DSPABASE: 0x00000000 (II) intel(0): DSPASURF: 0x04020000 (II) intel(0): DSPATILEOFF: 0x00000000 (II) intel(0): PIPEACONF: 0xc0000000 (enabled, active) (II) intel(0): PIPEASRC: 0x077f04af (1920, 1200) (II) intel(0): PIPEASTAT: 0x00000206 (status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS) (II) intel(0): FPA0: 0x00030c08 (n = 3, m1 = 12, m2 = 8) (II) intel(0): FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_A: 0xd4010c00 (enabled, dvo, default clock, DAC/serial mode, p1 = 1, p2 = 10) (II) intel(0): DPLL_A_MD: 0x00000000 (II) intel(0): HTOTAL_A: 0x081f077f (1920 active, 2080 total) (II) intel(0): HBLANK_A: 0x081f077f (1920 start, 2080 end) (II) intel(0): HSYNC_A: 0x07cf07af (1968 start, 2000 end) (II) intel(0): VTOTAL_A: 0x04d204af (1200 active, 1235 total) (II) intel(0): VBLANK_A: 0x04d204af (1200 start, 1235 end) (II) intel(0): VSYNC_A: 0x04b804b2 (1203 start, 1209 end) (II) intel(0): BCLRPAT_A: 0x00000000 (II) intel(0): VSYNCSHIFT_A: 0x00000000 (II) intel(0): DSPBCNTR: 0x01000000 (disabled, pipe B) (II) intel(0): DSPBSTRIDE: 0x00000000 (0 bytes) (II) intel(0): DSPBPOS: 0x00000000 (0, 0) (II) intel(0): DSPBSIZE: 0x00000000 (1, 1) (II) intel(0): DSPBBASE: 0x00000000 (II) intel(0): DSPBSURF: 0x00000000 (II) intel(0): DSPBTILEOFF: 0x00000000 (II) intel(0): PIPEBCONF: 0x00000000 (disabled, inactive) (II) intel(0): PIPEBSRC: 0x027f01df (640, 480) (II) intel(0): PIPEBSTAT: 0x00000000 (status:) (II) intel(0): FPB0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): FPB1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_B: 0x04020c00 (disabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 2, p2 = 10) (II) intel(0): DPLL_B_MD: 0x00000003 (II) intel(0): HTOTAL_B: 0x031f027f (640 active, 800 total) (II) intel(0): HBLANK_B: 0x03170287 (648 start, 792 end) (II) intel(0): HSYNC_B: 0x02ef028f (656 start, 752 end) (II) intel(0): VTOTAL_B: 0x020c01df (480 active, 525 total) (II) intel(0): VBLANK_B: 0x020401e7 (488 start, 517 end) (II) intel(0): VSYNC_B: 0x01eb01e9 (490 start, 492 end) (II) intel(0): BCLRPAT_B: 0x00000000 (II) intel(0): VSYNCSHIFT_B: 0x00000000 (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (II) intel(0): VCLK_POST_DIV: 0x00020002 (II) intel(0): VGACNTRL: 0x8024008e (disabled) (II) intel(0): TV_CTL: 0x00000010 (II) intel(0): TV_DAC: 0x00000000 (II) intel(0): TV_CSC_Y: 0x00000000 (II) intel(0): TV_CSC_Y2: 0x00000000 (II) intel(0): TV_CSC_U: 0x00000000 (II) intel(0): TV_CSC_U2: 0x00000000 (II) intel(0): TV_CSC_V: 0x00000000 (II) intel(0): TV_CSC_V2: 0x00000000 (II) intel(0): TV_CLR_KNOBS: 0x00000000 (II) intel(0): TV_CLR_LEVEL: 0x00000000 (II) intel(0): TV_H_CTL_1: 0x00000000 (II) intel(0): TV_H_CTL_2: 0x00000000 (II) intel(0): TV_H_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_1: 0x00000000 (II) intel(0): TV_V_CTL_2: 0x00000000 (II) intel(0): TV_V_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_4: 0x00000000 (II) intel(0): TV_V_CTL_5: 0x00000000 (II) intel(0): TV_V_CTL_6: 0x00000000 (II) intel(0): TV_V_CTL_7: 0x00000000 (II) intel(0): TV_SC_CTL_1: 0x00000000 (II) intel(0): TV_SC_CTL_2: 0x00000000 (II) intel(0): TV_SC_CTL_3: 0x00000000 (II) intel(0): TV_WIN_POS: 0x00000000 (II) intel(0): TV_WIN_SIZE: 0x00000000 (II) intel(0): TV_FILTER_CTL_1: 0x00000000 (II) intel(0): TV_FILTER_CTL_2: 0x00000000 (II) intel(0): TV_FILTER_CTL_3: 0x00000000 (II) intel(0): TV_CC_CONTROL: 0x00000000 (II) intel(0): TV_CC_DATA: 0x00000000 (II) intel(0): TV_H_LUMA_0: 0x00000000 (II) intel(0): TV_H_LUMA_59: 0x00000000 (II) intel(0): TV_H_CHROMA_0: 0x00000000 (II) intel(0): TV_H_CHROMA_59: 0x00000000 (II) intel(0): FBC_CFB_BASE: 0xffffffff (II) intel(0): FBC_LL_BASE: 0xffffffff (II) intel(0): FBC_CONTROL: 0xffffffff (II) intel(0): FBC_COMMAND: 0xffffffff (II) intel(0): FBC_STATUS: 0xffffffff (II) intel(0): FBC_CONTROL2: 0xffffffff (II) intel(0): FBC_FENCE_OFF: 0xffffffff (II) intel(0): FBC_MOD_NUM: 0xffffffff (II) intel(0): MI_MODE: 0x00000200 (II) intel(0): MI_ARB_STATE: 0x00000040 (II) intel(0): MI_RDRET_STATE: 0x00000000 (II) intel(0): ECOSKPD: 0x00000307 (II) intel(0): DP_B: 0x0000001c (II) intel(0): DPB_AUX_CH_CTL: 0x00050000 (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_C: 0x0000001c (II) intel(0): DPC_AUX_CH_CTL: 0x00050000 (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_D: 0x00000018 (II) intel(0): DPD_AUX_CH_CTL: 0x00050000 (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000 (II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end) (II) intel(0): pipe A dot 153600 n 3 m1 12 m2 8 p1 1 p2 10 (II) intel(0): pipe B dot 100800 n 3 m1 17 m2 8 p1 2 p2 10 (II) intel(0): DumpRegsEnd (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe A (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) Option "dpms" (**) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: XF86DRI Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 14, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 14, (OK) drmOpenByBusid: drmOpenMinor returns 14 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /opt/X11R7/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 519 x 324 [dix] Could not init font path element unix/:7100, removing from list! (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Mouse0: Device: "/dev/input/event0" (II) Mouse0: Found 3 mouse buttons (II) Mouse0: Found x and y relative axes (II) Mouse0: Configuring as mouse (**) Mouse0: YAxisMapping: buttons 4 and 5 (**) Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Mouse0: (accel) keeping acceleration scheme 1 (**) Mouse0: (accel) filter chain progression: 2.00 (**) Mouse0: (accel) filter stage 0: 20.00 ms (**) Mouse0: (accel) set acceleration profile 0 (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Keyboard0: Device: "/dev/input/event1" (II) Keyboard0: Found 3 mouse buttons (II) Keyboard0: Found x and y relative axes (II) Keyboard0: Found scroll wheel(s) (II) Keyboard0: Configuring as mouse (**) Keyboard0: YAxisMapping: buttons 4 and 5 (**) Keyboard0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Keyboard0" (type: MOUSE) (**) Keyboard0: (accel) keeping acceleration scheme 1 (**) Keyboard0: (accel) filter chain progression: 2.00 (**) Keyboard0: (accel) filter stage 0: 20.00 ms (**) Keyboard0: (accel) set acceleration profile 0 (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (WW) Macintosh mouse button emulation: device file already in use. Ignoring. (II) UnloadModule: "evdev" (EE) PreInit returned NULL for "Macintosh mouse button emulation" (EE) config/hal: NewInputDeviceRequest failed (8) (II) config/hal: Adding input device Microsoft Comfort Curve Keyboard 2000 (**) Microsoft Comfort Curve Keyboard 2000: always reports core events (**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event3" (II) Microsoft Comfort Curve Keyboard 2000: Found 1 mouse buttons (II) Microsoft Comfort Curve Keyboard 2000: Found scroll wheel(s) (II) Microsoft Comfort Curve Keyboard 2000: Found keys (II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard (II) Microsoft Comfort Curve Keyboard 2000: Adding scrollwheel support (**) Microsoft Comfort Curve Keyboard 2000: YAxisMapping: buttons 4 and 5 (**) Microsoft Comfort Curve Keyboard 2000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Microsoft Comfort Curve Keyboard 2000 (**) Microsoft Comfort Curve Keyboard 2000: always reports core events (**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event2" (II) Microsoft Comfort Curve Keyboard 2000: Found keys (II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1" (WW) Logitech USB-PS/2 Optical Mouse: device file already in use. Ignoring. (II) UnloadModule: "evdev" (EE) PreInit returned NULL for "Logitech USB-PS/2 Optical Mouse" (EE) config/hal: NewInputDeviceRequest failed (8)