This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.5.99.902 (1.6.0 RC 2) Release Date: 2009-1-30 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.28 x86_64 Debian Current Operating System: Linux durandal 2.6.26-1-amd64 #1 SMP Sat Jan 10 17:57:00 UTC 2009 x86_64 Build Date: 31 January 2009 07:16:39PM xorg-server 2:1.5.99.902-1 (jcristau@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 16 10:39:03 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Synaptics Touchpad" (**) Option "DontZap" "on" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Generic Keyboard (II) Loader magic: 0xce0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8 (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers (II) Matched intel from file name intel.ids (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.6.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 0.99.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xF0000000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000246 to 0x80000246 (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 488960 total, 1 used (II) intel(0): I830CheckAvailableMemory: 1955836 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] loaded kernel module for "i915" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xf0000000 (II) intel(0): [drm] ring buffer = 0xd0000000 (II) intel(0): [drm] mapped front buffer at 0xd0200000, handle = 0xd0200000 (II) intel(0): [drm] mapped back buffer at 0xd1b00000, handle = 0xd1b00000 (II) intel(0): [drm] mapped depth buffer at 0xd2140000, handle = 0xd2140000 (II) intel(0): [drm] mapped classic textures at 0xd2780000, handle = 0xd2780000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 19660800 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00840000 (pgoffset 2112) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01b00000 (pgoffset 6912) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02140000 (pgoffset 8512) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02780000 (pgoffset 10112) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB) (II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB) (II) intel(0): 0x00132000-0x00140fff: exa G965 state buffer (60 kB) (II) intel(0): 0x00141000-0x00141fff: overlay registers (4 kB) (II) intel(0): 0x00142000-0x00142fff: power context (4 kB) (II) intel(0): 0x00200000-0x0083ffff: front buffer (6400 kB) X tiled (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x00840000-0x01afffff: exa offscreen (19200 kB) (II) intel(0): 0x01b00000-0x0213ffff: back buffer (6400 kB) X tiled (II) intel(0): 0x02140000-0x0277ffff: depth buffer (6400 kB) Y tiled (II) intel(0): 0x02780000-0x0477ffff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): [drm] dma control initialized, using IRQ 16 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: XF86DRI Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: drmOpenMinor returns 12 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 331 x 207 (II) Synaptics touchpad driver version 0.99.3 (--) Synaptics Touchpad auto-dev sets device to /dev/input/event11 (**) Option "Device" "/dev/input/event11" (II) Synaptics Touchpad: x-axis range 1472 - 5472 (II) Synaptics Touchpad: y-axis range 1408 - 4448 (II) Synaptics Touchpad: pressure range 0 - 255 (II) Synaptics Touchpad: finger width range 0 - 0 (II) Synaptics Touchpad: buttons: left right middle double triple (**) Option "SHMConfig" "1" (**) Option "VertEdgeScroll" "1" (--) Synaptics Touchpad touchpad found (**) Option "SendCoreEvents" "true" (**) Synaptics Touchpad: always reports core events (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD) (**) Synaptics Touchpad: (accel) keeping acceleration scheme 1 (**) Synaptics Touchpad: (accel) filter chain progression: 2.00 (**) Synaptics Touchpad: (accel) filter stage 0: 20.00 ms (**) Synaptics Touchpad: (accel) set acceleration profile 0 (--) Synaptics Touchpad touchpad found (II) config/hal: Adding input device HID 046a:0023 (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) HID 046a:0023: always reports core events (**) HID 046a:0023: Device: "/dev/input/event9" (II) HID 046a:0023: Found 1 mouse buttons (II) HID 046a:0023: Found keys (II) HID 046a:0023: Configuring as keyboard (**) HID 046a:0023: YAxisMapping: buttons 4 and 5 (**) HID 046a:0023: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) HID 046a:0023: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) HID 046a:0023: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) HID 046a:0023: xkb_layout: "us" (II) config/hal: Adding input device HID 046a:0023 (**) HID 046a:0023: always reports core events (**) HID 046a:0023: Device: "/dev/input/event8" (II) HID 046a:0023: Found keys (II) HID 046a:0023: Configuring as keyboard (II) XINPUT: Adding extended input device "HID 046a:0023" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) HID 046a:0023: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) HID 046a:0023: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) HID 046a:0023: xkb_layout: "us" (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) Synaptics touchpad driver version 0.99.3 (**) Option "Device" "/dev/input/event11" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple (--) SynPS/2 Synaptics TouchPad touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0 (WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16 (--) SynPS/2 Synaptics TouchPad touchpad found (II) config/hal: Adding input device Logitech USB Optical Mouse (**) Logitech USB Optical Mouse: always reports core events (**) Logitech USB Optical Mouse: Device: "/dev/input/event10" (II) Logitech USB Optical Mouse: Found 8 mouse buttons (II) Logitech USB Optical Mouse: Found x and y relative axes (II) Logitech USB Optical Mouse: Configuring as mouse (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE) (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB Optical Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB Optical Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB Optical Mouse: (accel) set acceleration profile 0 (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) AT Translated Set 2 keyboard: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 exaCopyDirty: Pending damage region empty! (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "VSC", prod id 55584 (II) intel(0): EDID vendor "SEC", prod id 16705 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz) (II) intel(0): EDID vendor "SEC", prod id 16705 (II) UnloadModule: "synaptics" (II) HID 046a:0023: Close (II) UnloadModule: "evdev" (II) HID 046a:0023: Close (II) UnloadModule: "evdev" (II) UnloadModule: "synaptics" (II) Logitech USB Optical Mouse: Close (II) UnloadModule: "evdev" (II) AT Translated Set 2 keyboard: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) intel(0): xf86UnbindGARTMemory: unbind key 2 (II) intel(0): xf86UnbindGARTMemory: unbind key 3 (II) intel(0): xf86UnbindGARTMemory: unbind key 4 block already free block already free Backtrace: 0: /usr/bin/X11/X(xorg_backtrace+0x26) [0x4edff6] 1: /usr/bin/X11/X(xf86SigHandler+0x39) [0x483b79] 2: /lib/libc.so.6 [0x7fac0f89f190] 3: /lib/libc.so.6 [0x7fac0f8df29e] 4: /lib/libc.so.6 [0x7fac0f8e0988] 5: /lib/libc.so.6(cfree+0x76) [0x7fac0f8e0cf6] 6: /usr/lib/libdrm_intel.so.1 [0x7fac0e081c11] 7: /usr/lib/libdrm_intel.so.1 [0x7fac0e081c9c] 8: /usr/lib/xorg/modules/drivers//intel_drv.so(i965_free_video+0x2b) [0x7fac0e2d0b9b] 9: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7fac0e2b3f3a] 10: /usr/bin/X11/X [0x502a29] 11: /usr/bin/X11/X [0x5313e3] 12: /usr/bin/X11/X(main+0x44c) [0x432e2c] 13: /lib/libc.so.6(__libc_start_main+0xe6) [0x7fac0f88b5a6] 14: /usr/bin/X11/X [0x432229] Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.