[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29-rc6 (root@x-she) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #2 SMP Wed Feb 25 16:42:25 CST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d2afe00 (usable) [ 0.000000] BIOS-e820: 000000007d2afe00 - 000000007d2b1ea0 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d2b1ea0 - 000000007e000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved) [ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x7d2af max_arch_pfn = 0x100000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000 [ 0.000000] RAMDISK: 37d16000 - 37fef532 [ 0.000000] Allocated new RAMDISK: 00100000 - 003d9532 [ 0.000000] Move RAMDISK from 0000000037d16000 - 0000000037fef531 to 00100000 - 003d9531 [ 0.000000] ACPI: RSDP 000E5C10, 0014 (r0 COMPAQ) [ 0.000000] ACPI: RSDT 7D2C1E40, 0044 (r1 HPQOEM SLIC-BPC 20070718 0) [ 0.000000] ACPI: FACP 7D2C1EE8, 0074 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 7D2C2427, A370 (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E) [ 0.000000] ACPI: FACS 7D2C1E00, 0040 [ 0.000000] ACPI: APIC 7D2C1F5C, 0084 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: ASF! 7D2C1FE0, 0063 (r32 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: MCFG 7D2C2043, 003C (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: TCPA 7D2C207F, 0032 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: SLIC 7D2C20B1, 0176 (r1 HPQOEM SLIC-BPC 1 0) [ 0.000000] ACPI: HPET 7D2C2227, 0038 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: DMAR 7D2C225F, 01A8 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1118MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00008000 - 0000ee80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 000179cca4] TEXT DATA BSS ==> [0001000000 - 000179cca4] [ 0.000000] #4 [000179d000 - 00017a4000] INIT_PG_TABLE ==> [000179d000 - 00017a4000] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000100000 - 00003d9532] NEW RAMDISK ==> [0000100000 - 00003d9532] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f9bf0] 000f9bf0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007d2af [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007d2af [ 0.000000] On node 0 totalpages: 512590 [ 0.000000] free_area_init_node: node 0, pgdat c1632f00, node_mem_map c17a4000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2238 pages used for memmap [ 0.000000] HighMem zone: 284147 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7e000000:76000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508584 [ 0.000000] Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2660.136 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Memory: 2021676k/2050748k available (4070k kernel code, 27880k reserved, 2673k data, 364k init, 1145540k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xffc79000 - 0xfffff000 (3608 kB) [ 0.000999] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000999] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000999] .init : 0xc169f000 - 0xc16fa000 ( 364 kB) [ 0.000999] .data : 0xc13f9a79 - 0xc16960d0 (2673 kB) [ 0.000999] .text : 0xc1000000 - 0xc13f9a79 (4070 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.27 BogoMIPS (lpj=2660136) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 512 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] [ds] using Core 2/Atom configuration [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] using mwait in idle threads. [ 0.000999] Checking 'hlt' instruction... OK. [ 0.004412] ACPI: Core revision 20081204 [ 0.015497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.025763] CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b [ 0.025996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 5319.97 BogoMIPS (lpj=2659989) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] [ds] using Core 2/Atom configuration [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.097295] CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b [ 0.097303] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.098055] Brought up 2 CPUs [ 0.098057] Total of 2 processors activated (10640.25 BogoMIPS). [ 0.098128] khelper used greatest stack depth: 7052 bytes left [ 0.098128] net_namespace: 996 bytes [ 0.098128] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.098157] Time: 5:34:42 Date: 03/04/09 [ 0.098177] NET: Registered protocol family 16 [ 0.099006] ACPI: bus type pci registered [ 0.099018] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 [ 0.099018] PCI: MCFG area at f4000000 reserved in E820 [ 0.099018] PCI: Using MMCONFIG for extended config space [ 0.099018] PCI: Using configuration type 1 for base access [ 0.103009] bio: create slab at 0 [ 0.104118] ACPI: EC: Look up EC in DSDT [ 0.113998] ACPI: Interpreter enabled [ 0.114002] ACPI: (supports S0 S3 S4 S5) [ 0.114016] ACPI: Using IOAPIC for interrupt routing [ 0.119042] ACPI: No dock devices found. [ 0.119109] ACPI Error (dsfield-0140): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.119114] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c16a08), AE_ALREADY_EXISTS [ 0.119119] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.119141] ACPI Warning (nspredef-0328): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 [20081204] [ 0.119147] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.119166] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0100000-0xf017ffff] [ 0.119166] pci 0000:00:02.0: reg 14 io port: [0x1230-0x1237] [ 0.119166] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff] [ 0.119166] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0000000-0xf00fffff] [ 0.119166] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0180000-0xf01fffff] [ 0.119166] pci 0000:00:03.0: reg 10 64bit mmio: [0xf0226900-0xf022690f] [ 0.119166] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.119166] pci 0000:00:03.0: PME# disabled [ 0.119166] pci 0000:00:03.2: reg 10 io port: [0x1238-0x123f] [ 0.119166] pci 0000:00:03.2: reg 14 io port: [0x1270-0x1273] [ 0.119166] pci 0000:00:03.2: reg 18 io port: [0x1240-0x1247] [ 0.119166] pci 0000:00:03.2: reg 1c io port: [0x1274-0x1277] [ 0.119166] pci 0000:00:03.2: reg 20 io port: [0x11e0-0x11ef] [ 0.119192] pci 0000:00:03.3: reg 10 io port: [0x1248-0x124f] [ 0.119196] pci 0000:00:03.3: reg 14 32bit mmio: [0xf0224000-0xf0224fff] [ 0.119264] pci 0000:00:19.0: reg 10 32bit mmio: [0xf0200000-0xf021ffff] [ 0.119269] pci 0000:00:19.0: reg 14 32bit mmio: [0xf0225000-0xf0225fff] [ 0.119273] pci 0000:00:19.0: reg 18 io port: [0x1100-0x111f] [ 0.119305] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.119307] pci 0000:00:19.0: PME# disabled [ 0.119346] pci 0000:00:1a.0: reg 20 io port: [0x1120-0x113f] [ 0.119402] pci 0000:00:1a.1: reg 20 io port: [0x1140-0x115f] [ 0.119461] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0226000-0xf02263ff] [ 0.119506] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.119510] pci 0000:00:1a.7: PME# disabled [ 0.119542] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0220000-0xf0223fff] [ 0.119575] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.119578] pci 0000:00:1b.0: PME# disabled [ 0.119622] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.119624] pci 0000:00:1c.0: PME# disabled [ 0.119670] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.119673] pci 0000:00:1c.1: PME# disabled [ 0.119717] pci 0000:00:1d.0: reg 20 io port: [0x1160-0x117f] [ 0.119773] pci 0000:00:1d.1: reg 20 io port: [0x1180-0x119f] [ 0.120043] pci 0000:00:1d.2: reg 20 io port: [0x11a0-0x11bf] [ 0.120101] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0226400-0xf02267ff] [ 0.120146] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.120150] pci 0000:00:1d.7: PME# disabled [ 0.120247] pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO [ 0.120250] pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH6 GPIO [ 0.120253] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f) [ 0.120255] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f) [ 0.120258] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f) [ 0.120300] pci 0000:00:1f.2: reg 10 io port: [0x1250-0x1257] [ 0.120305] pci 0000:00:1f.2: reg 14 io port: [0x1278-0x127b] [ 0.120309] pci 0000:00:1f.2: reg 18 io port: [0x1258-0x125f] [ 0.120313] pci 0000:00:1f.2: reg 1c io port: [0x127c-0x127f] [ 0.120317] pci 0000:00:1f.2: reg 20 io port: [0x11f0-0x11ff] [ 0.120322] pci 0000:00:1f.2: reg 24 io port: [0x1200-0x120f] [ 0.120366] pci 0000:00:1f.5: reg 10 io port: [0x1260-0x1267] [ 0.120370] pci 0000:00:1f.5: reg 14 io port: [0x1280-0x1283] [ 0.120374] pci 0000:00:1f.5: reg 18 io port: [0x1268-0x126f] [ 0.120379] pci 0000:00:1f.5: reg 1c io port: [0x1284-0x1287] [ 0.120383] pci 0000:00:1f.5: reg 20 io port: [0x1210-0x121f] [ 0.120387] pci 0000:00:1f.5: reg 24 io port: [0x1220-0x122f] [ 0.120513] pci 0000:00:1e.0: transparent bridge [ 0.120530] pci_bus 0000:00: on NUMA node 0 [ 0.120535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.120721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] [ 0.120783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT] [ 0.120847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.121044] ACPI Error (dsfield-0140): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.121048] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6c16a08), AE_ALREADY_EXISTS [ 0.121073] ACPI Warning (nspredef-0328): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 [20081204] [ 0.146706] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.146706] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.147063] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.147152] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.147241] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.147329] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.147418] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.147506] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.147555] SCSI subsystem initialized [ 0.147990] libata version 3.00 loaded. [ 0.147991] usbcore: registered new interface driver usbfs [ 0.147993] usbcore: registered new interface driver hub [ 0.147993] usbcore: registered new device driver usb [ 0.147993] PCI: Using ACPI for IRQ routing [ 0.156999] cfg80211: Using static regulatory domain info [ 0.156999] cfg80211: Regulatory domain: US [ 0.156999] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.156999] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.157000] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.157002] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.157004] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.157006] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.157008] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.157011] cfg80211: Calling CRDA for country: US [ 0.157018] NetLabel: Initializing [ 0.157018] NetLabel: domain hash size = 128 [ 0.157018] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.157018] NetLabel: unlabeled traffic allowed by default [ 0.157018] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.157018] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.163042] pnp: PnP ACPI init [ 0.163049] ACPI: bus type pnp registered [ 0.165474] pnp 00:0e: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling [ 0.165477] pnp 00:0e: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling [ 0.165479] pnp 00:0e: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling [ 0.165481] pnp 00:0e: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling [ 0.166137] pnp: PnP ACPI: found 17 devices [ 0.166139] ACPI: ACPI bus type pnp unregistered [ 0.166149] system 00:0e: ioport range 0x400-0x41f has been reserved [ 0.166151] system 00:0e: ioport range 0x420-0x43f has been reserved [ 0.166153] system 00:0e: ioport range 0x440-0x45f has been reserved [ 0.166155] system 00:0e: ioport range 0x460-0x47f has been reserved [ 0.166157] system 00:0e: ioport range 0x480-0x48f has been reserved [ 0.166159] system 00:0e: ioport range 0xfa00-0xfa3f has been reserved [ 0.166162] system 00:0e: ioport range 0xfc00-0xfc7f has been reserved [ 0.166164] system 00:0e: ioport range 0xfc80-0xfcff has been reserved [ 0.166166] system 00:0e: ioport range 0xfe00-0xfe7f has been reserved [ 0.166168] system 00:0e: ioport range 0xfe80-0xfeff has been reserved [ 0.166172] system 00:0f: ioport range 0x4d0-0x4d1 has been reserved [ 0.166176] system 00:10: iomem range 0x0-0x9ffff could not be reserved [ 0.166178] system 00:10: iomem range 0x100000-0x7dffffff could not be reserved [ 0.166180] system 00:10: iomem range 0xe4000-0xfffff could not be reserved [ 0.166182] system 00:10: iomem range 0xfec01000-0xfecfffff has been reserved [ 0.166184] system 00:10: iomem range 0xfed00400-0xfed3ffff has been reserved [ 0.166187] system 00:10: iomem range 0xfed45000-0xffffffff has been reserved [ 0.166189] system 00:10: iomem range 0xf4000000-0xf7ffffff has been reserved [ 0.166191] system 00:10: iomem range 0xcd400-0xe3fff has been reserved [ 0.201086] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:20 [ 0.201088] pci 0000:00:1c.0: IO window: disabled [ 0.201091] pci 0000:00:1c.0: MEM window: disabled [ 0.201094] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.201098] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:30 [ 0.201100] pci 0000:00:1c.1: IO window: disabled [ 0.201103] pci 0000:00:1c.1: MEM window: disabled [ 0.201106] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.201110] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 0.201112] pci 0000:00:1e.0: IO window: disabled [ 0.201115] pci 0000:00:1e.0: MEM window: disabled [ 0.201118] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.201128] pci 0000:00:1c.0: setting latency timer to 64 [ 0.201135] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.201138] pci 0000:00:1c.1: setting latency timer to 64 [ 0.201142] pci 0000:00:1e.0: setting latency timer to 64 [ 0.201145] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.201147] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.201148] pci_bus 0000:20: resource 0 mem: [0x0-0x0] [ 0.201150] pci_bus 0000:20: resource 1 mem: [0x0-0x0] [ 0.201152] pci_bus 0000:20: resource 2 mem: [0x0-0x0] [ 0.201153] pci_bus 0000:20: resource 3 mem: [0x0-0x0] [ 0.201155] pci_bus 0000:30: resource 0 mem: [0x0-0x0] [ 0.201157] pci_bus 0000:30: resource 1 mem: [0x0-0x0] [ 0.201158] pci_bus 0000:30: resource 2 mem: [0x0-0x0] [ 0.201160] pci_bus 0000:30: resource 3 mem: [0x0-0x0] [ 0.201162] pci_bus 0000:07: resource 0 mem: [0x0-0x0] [ 0.201164] pci_bus 0000:07: resource 1 mem: [0x0-0x0] [ 0.201165] pci_bus 0000:07: resource 2 mem: [0x0-0x0] [ 0.201167] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 0.201169] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff] [ 0.201187] NET: Registered protocol family 2 [ 0.212308] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.212511] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.212814] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.212963] TCP: Hash tables configured (established 131072 bind 65536) [ 0.212964] TCP reno registered [ 0.215370] NET: Registered protocol family 1 [ 0.215469] checking if image is initramfs... it is [ 0.381145] Freeing initrd memory: 2917k freed [ 0.381893] Microcode Update Driver: v2.00 , Peter Oruba [ 0.382104] audit: initializing netlink socket (disabled) [ 0.382122] type=2000 audit(1236144882.381:1): initialized [ 0.387858] highmem bounce pool size: 64 pages [ 0.387861] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.389786] VFS: Disk quotas dquot_6.5.2 [ 0.389842] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.390376] msgmni has been set to 1718 [ 0.390455] SELinux: Registering netfilter hooks [ 0.390681] alg: No test for stdrng (krng) [ 0.390762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.390764] io scheduler noop registered [ 0.390765] io scheduler anticipatory registered [ 0.390767] io scheduler deadline registered [ 0.390775] io scheduler cfq registered (default) [ 0.390786] pci 0000:00:02.0: Boot video device [ 0.390795] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.390796] pci 0000:00:1a.0: Performing full reset [ 0.390810] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.390811] pci 0000:00:1a.1: Performing full reset [ 0.390846] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.390848] pci 0000:00:1d.0: Performing full reset [ 0.390861] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.390862] pci 0000:00:1d.1: Performing full reset [ 0.390875] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.390876] pci 0000:00:1d.2: Performing full reset [ 0.390968] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.391014] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.391142] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.391183] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.391362] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.391547] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.391549] ACPI: Power Button (FF) [PWRF] [ 0.391607] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.392226] ACPI: Power Button (CM) [PBTN] [ 0.392475] ACPI: SSDT 7D2CD42B, 03AC (r1 COMPAQ CPU_TM2 1 MSFT 100000E) [ 0.392708] ACPI: SSDT 7D2CD2AF, 017C (r1 COMPAQ CST 1 MSFT 100000E) [ 0.392959] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.392995] processor ACPI_CPU:00: registered as cooling_device0 [ 0.392998] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.393193] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.393225] processor ACPI_CPU:01: registered as cooling_device1 [ 0.393228] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.404182] Non-volatile memory driver v1.3 [ 0.404253] Linux agpgart interface v0.103 [ 0.404291] agpgart-intel 0000:00:00.0: Intel Q35 Chipset [ 0.405167] agpgart-intel 0000:00:00.0: detected 6140K stolen memory [ 0.407427] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.407497] [drm] Initialized drm 1.1.0 20060810 [ 0.407532] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.407535] pci 0000:00:02.0: setting latency timer to 64 [ 0.409101] pci 0000:00:02.0: irq 26 for MSI/MSI-X [ 0.500902] Switched to high resolution mode on CPU 1 [ 0.500903] Switched to high resolution mode on CPU 0 [ 0.989916] allocated 1680x1050 fb: 0x007e0000, bo f6dfe120 [ 1.064883] [drm] TMDS-8: set mode 1680x1050 14 [ 1.294818] Console: switching to colour frame buffer device 210x65 [ 1.300984] fb0: inteldrmfb frame buffer device [ 1.300985] registered panic notifier [ 1.300988] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 1.301010] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.545278] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.545661] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.545805] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.545860] 0000:00:03.3: ttyS1 at I/O 0x1248 (irq = 17) is a 16550A [ 1.547041] brd: module loaded [ 1.547562] loop: module loaded [ 1.547564] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 1.547565] Copyright (c) 1999-2006 Intel Corporation. [ 1.547598] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 1.547599] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.547619] e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.547625] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.547688] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 1.726328] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0f:fe:d5:e9:8a [ 1.726330] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.726350] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1062ff-0ff [ 1.726409] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI [ 1.726410] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.726493] sky2 driver version 1.22 [ 1.726636] console [netcon0] enabled [ 1.726637] netconsole: network logging started [ 1.726687] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.726745] Loading iSCSI transport class v2.0-870. [ 1.726898] Driver 'sd' needs updating - please use bus_type methods [ 1.726923] Driver 'sr' needs updating - please use bus_type methods [ 1.727022] ata_piix 0000:00:1f.2: version 2.12 [ 1.727031] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.727034] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.878036] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.878084] scsi0 : ata_piix [ 1.878215] scsi1 : ata_piix [ 1.878396] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x11f0 irq 14 [ 1.878400] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x11f8 irq 15 [ 2.639068] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.639078] ata1.01: SATA link down (SStatus 0 SControl 300) [ 2.642204] ata1.00: ATA-8: WDC WD1600AAJS-60WAA0, 58.01D58, max UDMA/100 [ 2.642206] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.648223] ata1.00: configured for UDMA/100 [ 2.648284] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-6 58.0 PQ: 0 ANSI: 5 [ 2.648399] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.648409] sd 0:0:0:0: [sda] Write Protect is off [ 2.648410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.648425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.648465] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.648474] sd 0:0:0:0: [sda] Write Protect is off [ 2.648476] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.648490] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.648492] sda: sda1 sda2 [ 2.661323] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.661390] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.422075] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.422085] ata2.01: SATA link down (SStatus 0 SControl 300) [ 3.425208] ata2.00: ATAPI: TSSTcorpDVD-ROM TS-H353B, bc03, max UDMA/100 [ 3.431224] ata2.00: configured for UDMA/100 [ 3.433363] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353B bc03 PQ: 0 ANSI: 5 [ 3.439318] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 3.439320] Uniform CD-ROM driver Revision: 3.20 [ 3.439451] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.439536] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.439589] ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 3.439593] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 3.590036] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 3.590077] scsi2 : ata_piix [ 3.590180] scsi3 : ata_piix [ 3.590250] ata3: SATA max UDMA/133 cmd 0x1260 ctl 0x1280 bmdma 0x1210 irq 18 [ 3.590253] ata4: SATA max UDMA/133 cmd 0x1268 ctl 0x1284 bmdma 0x1218 irq 18 [ 3.905623] ata3: SATA link down (SStatus 0 SControl 300) [ 4.220623] ata4: SATA link down (SStatus 0 SControl 300) [ 4.220901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.220903] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 4.220917] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.220928] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.220931] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.220972] drivers/usb/core/inode.c: creating file 'devices' [ 4.220975] drivers/usb/core/inode.c: creating file '001' [ 4.221018] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.221024] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 [ 4.221026] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 4.221038] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.224907] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.224912] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 4.224913] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 4.224922] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0226000 [ 4.224925] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.228809] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 4.234146] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.234164] usb usb1: default language 0x0409 [ 4.234171] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.234173] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.234175] usb usb1: Product: EHCI Host Controller [ 4.234177] usb usb1: Manufacturer: Linux 2.6.29-rc6 ehci_hcd [ 4.234178] usb usb1: SerialNumber: 0000:00:1a.7 [ 4.234212] usb usb1: uevent [ 4.234240] usb usb1: usb_probe_device [ 4.234242] usb usb1: configuration #1 chosen from 1 choice [ 4.234246] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 4.234256] usb 1-0:1.0: uevent [ 4.234283] hub 1-0:1.0: usb_probe_interface [ 4.234284] hub 1-0:1.0: usb_probe_interface - got id [ 4.234286] hub 1-0:1.0: USB hub found [ 4.234290] hub 1-0:1.0: 4 ports detected [ 4.234291] hub 1-0:1.0: standalone hub [ 4.234292] hub 1-0:1.0: no power switching (usb 1.0) [ 4.234294] hub 1-0:1.0: individual port over-current protection [ 4.234295] hub 1-0:1.0: power on to power good time: 20ms [ 4.234298] hub 1-0:1.0: local power source is good [ 4.234299] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 4.234372] drivers/usb/core/inode.c: creating file '001' [ 4.234422] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.234432] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.234434] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.234467] drivers/usb/core/inode.c: creating file '002' [ 4.234505] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.234510] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.234512] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 4.234524] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.238397] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.238401] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 4.238402] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 4.238411] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0226400 [ 4.238414] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.242297] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 4.248143] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.248157] usb usb2: default language 0x0409 [ 4.248163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.248165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.248167] usb usb2: Product: EHCI Host Controller [ 4.248169] usb usb2: Manufacturer: Linux 2.6.29-rc6 ehci_hcd [ 4.248171] usb usb2: SerialNumber: 0000:00:1d.7 [ 4.248204] usb usb2: uevent [ 4.248231] usb usb2: usb_probe_device [ 4.248233] usb usb2: configuration #1 chosen from 1 choice [ 4.248236] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.248247] usb 2-0:1.0: uevent [ 4.248272] hub 2-0:1.0: usb_probe_interface [ 4.248273] hub 2-0:1.0: usb_probe_interface - got id [ 4.248275] hub 2-0:1.0: USB hub found [ 4.248279] hub 2-0:1.0: 6 ports detected [ 4.248280] hub 2-0:1.0: standalone hub [ 4.248281] hub 2-0:1.0: no power switching (usb 1.0) [ 4.248282] hub 2-0:1.0: individual port over-current protection [ 4.248283] hub 2-0:1.0: power on to power good time: 20ms [ 4.248286] hub 2-0:1.0: local power source is good [ 4.248287] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 4.248337] drivers/usb/core/inode.c: creating file '001' [ 4.248405] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.248406] ohci_hcd: block sizes: ed 64 td 64 [ 4.248437] uhci_hcd: USB Universal Host Controller Interface driver [ 4.248452] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.248456] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.248458] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.248489] drivers/usb/core/inode.c: creating file '003' [ 4.248526] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.248531] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.248534] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.248536] uhci_hcd 0000:00:1a.0: Performing full reset [ 4.248547] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 4.248550] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120 [ 4.248570] usb usb3: default language 0x0409 [ 4.248574] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.248576] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.248578] usb usb3: Product: UHCI Host Controller [ 4.248579] usb usb3: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 4.248580] usb usb3: SerialNumber: 0000:00:1a.0 [ 4.248605] usb usb3: uevent [ 4.248631] usb usb3: usb_probe_device [ 4.248633] usb usb3: configuration #1 chosen from 1 choice [ 4.248636] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 4.248646] usb 3-0:1.0: uevent [ 4.248673] hub 3-0:1.0: usb_probe_interface [ 4.248674] hub 3-0:1.0: usb_probe_interface - got id [ 4.248675] hub 3-0:1.0: USB hub found [ 4.248680] hub 3-0:1.0: 2 ports detected [ 4.248681] hub 3-0:1.0: standalone hub [ 4.248682] hub 3-0:1.0: no power switching (usb 1.0) [ 4.248683] hub 3-0:1.0: individual port over-current protection [ 4.248684] hub 3-0:1.0: power on to power good time: 2ms [ 4.248687] hub 3-0:1.0: local power source is good [ 4.248688] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 4.248728] drivers/usb/core/inode.c: creating file '001' [ 4.248782] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.248786] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.248788] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.248819] drivers/usb/core/inode.c: creating file '004' [ 4.248856] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 4.248860] uhci_hcd 0000:00:1a.1: detected 2 ports [ 4.248863] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.248865] uhci_hcd 0000:00:1a.1: Performing full reset [ 4.248876] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 4.248885] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140 [ 4.248903] usb usb4: default language 0x0409 [ 4.248908] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.248909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.248911] usb usb4: Product: UHCI Host Controller [ 4.248912] usb usb4: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 4.248913] usb usb4: SerialNumber: 0000:00:1a.1 [ 4.248938] usb usb4: uevent [ 4.248965] usb usb4: usb_probe_device [ 4.248967] usb usb4: configuration #1 chosen from 1 choice [ 4.248970] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 4.248980] usb 4-0:1.0: uevent [ 4.249006] hub 4-0:1.0: usb_probe_interface [ 4.249007] hub 4-0:1.0: usb_probe_interface - got id [ 4.249008] hub 4-0:1.0: USB hub found [ 4.249012] hub 4-0:1.0: 2 ports detected [ 4.249013] hub 4-0:1.0: standalone hub [ 4.249014] hub 4-0:1.0: no power switching (usb 1.0) [ 4.249015] hub 4-0:1.0: individual port over-current protection [ 4.249017] hub 4-0:1.0: power on to power good time: 2ms [ 4.249019] hub 4-0:1.0: local power source is good [ 4.249021] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 4.249061] drivers/usb/core/inode.c: creating file '001' [ 4.249115] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4.249119] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.249121] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.249155] drivers/usb/core/inode.c: creating file '005' [ 4.249192] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 4.249196] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.249199] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.249201] uhci_hcd 0000:00:1d.0: Performing full reset [ 4.249212] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 4.249215] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001160 [ 4.249235] usb usb5: default language 0x0409 [ 4.249240] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.249242] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.249243] usb usb5: Product: UHCI Host Controller [ 4.249244] usb usb5: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 4.249245] usb usb5: SerialNumber: 0000:00:1d.0 [ 4.249269] usb usb5: uevent [ 4.249294] usb usb5: usb_probe_device [ 4.249296] usb usb5: configuration #1 chosen from 1 choice [ 4.249299] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 4.249309] usb 5-0:1.0: uevent [ 4.249334] hub 5-0:1.0: usb_probe_interface [ 4.249336] hub 5-0:1.0: usb_probe_interface - got id [ 4.249337] hub 5-0:1.0: USB hub found [ 4.249340] hub 5-0:1.0: 2 ports detected [ 4.249342] hub 5-0:1.0: standalone hub [ 4.249343] hub 5-0:1.0: no power switching (usb 1.0) [ 4.249344] hub 5-0:1.0: individual port over-current protection [ 4.249345] hub 5-0:1.0: power on to power good time: 2ms [ 4.249348] hub 5-0:1.0: local power source is good [ 4.249349] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 4.249390] drivers/usb/core/inode.c: creating file '001' [ 4.249439] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.249443] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.249445] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.249476] drivers/usb/core/inode.c: creating file '006' [ 4.249512] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 4.249517] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.249520] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.249521] uhci_hcd 0000:00:1d.1: Performing full reset [ 4.249533] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 4.249535] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001180 [ 4.249555] usb usb6: default language 0x0409 [ 4.249559] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.249561] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.249562] usb usb6: Product: UHCI Host Controller [ 4.249564] usb usb6: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 4.249565] usb usb6: SerialNumber: 0000:00:1d.1 [ 4.249590] usb usb6: uevent [ 4.249615] usb usb6: usb_probe_device [ 4.249616] usb usb6: configuration #1 chosen from 1 choice [ 4.249619] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 4.249629] usb 6-0:1.0: uevent [ 4.249654] hub 6-0:1.0: usb_probe_interface [ 4.249655] hub 6-0:1.0: usb_probe_interface - got id [ 4.249657] hub 6-0:1.0: USB hub found [ 4.249660] hub 6-0:1.0: 2 ports detected [ 4.249661] hub 6-0:1.0: standalone hub [ 4.249662] hub 6-0:1.0: no power switching (usb 1.0) [ 4.249663] hub 6-0:1.0: individual port over-current protection [ 4.249665] hub 6-0:1.0: power on to power good time: 2ms [ 4.249667] hub 6-0:1.0: local power source is good [ 4.249668] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 4.249708] drivers/usb/core/inode.c: creating file '001' [ 4.249761] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.249765] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.249767] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.249798] drivers/usb/core/inode.c: creating file '007' [ 4.249835] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 4.249840] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.249843] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.249844] uhci_hcd 0000:00:1d.2: Performing full reset [ 4.249856] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 4.249858] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011a0 [ 4.249883] usb usb7: default language 0x0409 [ 4.249887] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.249889] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.249891] usb usb7: Product: UHCI Host Controller [ 4.249892] usb usb7: Manufacturer: Linux 2.6.29-rc6 uhci_hcd [ 4.249893] usb usb7: SerialNumber: 0000:00:1d.2 [ 4.249918] usb usb7: uevent [ 4.249943] usb usb7: usb_probe_device [ 4.249944] usb usb7: configuration #1 chosen from 1 choice [ 4.249948] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 4.249957] usb 7-0:1.0: uevent [ 4.249982] hub 7-0:1.0: usb_probe_interface [ 4.249983] hub 7-0:1.0: usb_probe_interface - got id [ 4.249984] hub 7-0:1.0: USB hub found [ 4.249988] hub 7-0:1.0: 2 ports detected [ 4.249989] hub 7-0:1.0: standalone hub [ 4.249990] hub 7-0:1.0: no power switching (usb 1.0) [ 4.249991] hub 7-0:1.0: individual port over-current protection [ 4.249993] hub 7-0:1.0: power on to power good time: 2ms [ 4.249995] hub 7-0:1.0: local power source is good [ 4.249996] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 4.250035] drivers/usb/core/inode.c: creating file '001' [ 4.250138] usbcore: registered new interface driver usblp [ 4.250140] Initializing USB Mass Storage driver... [ 4.250185] usbcore: registered new interface driver usb-storage [ 4.250187] USB Mass Storage support registered. [ 4.250230] usbcore: registered new interface driver libusual [ 4.250310] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 4.253224] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.253227] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.257189] mice: PS/2 mouse device common for all mice [ 4.269276] rtc_cmos 00:03: RTC can wake from S4 [ 4.269318] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 4.269338] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.269536] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 4.269713] cpuidle: using governor ladder [ 4.269998] cpuidle: using governor menu [ 4.270001] No iBFT detected. [ 4.270038] Marking TSC unstable due to TSC halts in idle [ 4.270765] modprobe used greatest stack depth: 6984 bytes left [ 4.270870] usbcore: registered new interface driver hiddev [ 4.270920] usbcore: registered new interface driver usbhid [ 4.270922] usbhid: v2.6:USB HID core driver [ 4.270968] Advanced Linux Sound Architecture Driver Version 1.0.18a. [ 4.271600] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.271620] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 4.334156] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 4.348156] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT [ 4.348160] hub 2-0:1.0: port 4: status 0501 change 0001 [ 4.348168] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 4.348171] hub 2-0:1.0: port 6: status 0501 change 0001 [ 4.348193] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.348196] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.349220] uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00 [ 4.349234] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00 [ 4.349242] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.448144] hub 2-0:1.0: state 7 ports 6 chg 0050 evt 0000 [ 4.448149] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 4.448155] ehci_hcd 0000:00:1d.7: port 4 low speed --> companion [ 4.499071] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC [ 4.499086] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 4.499091] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion [ 4.550144] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 4.550156] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 4.550162] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 4.550167] uhci_hcd 0000:00:1d.1: port 2 portsc 01a3,00 [ 4.550172] hub 6-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 4.652726] ALSA device list: [ 4.652728] #0: HDA Intel at 0xf0220000 irq 21 [ 4.652760] Netfilter messages via NETLINK v0.30. [ 4.652771] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.652966] ctnetlink v0.93: registering with nfnetlink. [ 4.653425] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.653442] TCP cubic registered [ 4.653443] Initializing XFRM netlink socket [ 4.653692] NET: Registered protocol family 10 [ 4.654396] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.654436] IPv6 over IPv4 tunneling driver [ 4.654479] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 4.654893] NET: Registered protocol family 17 [ 4.655038] RPC: Registered udp transport module. [ 4.655039] RPC: Registered tcp transport module. [ 4.656523] Using IPI No-Shortcut mode [ 4.656654] registered taskstats version 1 [ 4.656749] Magic number: 1:836:566 [ 4.656897] Freeing unused kernel memory: 364k freed [ 4.656959] Write protecting the kernel text: 4072k [ 4.656988] Write protecting the kernel read-only data: 1724k [ 4.756142] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 4.897570] usb 6-2: skipped 1 descriptor after interface [ 4.902569] usb 6-2: default language 0x0409 [ 4.917569] usb 6-2: New USB device found, idVendor=413c, idProduct=2003 [ 4.917571] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.917574] usb 6-2: Product: Dell USB Keyboard [ 4.917575] usb 6-2: Manufacturer: Dell [ 4.917622] usb 6-2: uevent [ 4.917637] usb 6-2: usb_probe_device [ 4.917639] usb 6-2: configuration #1 chosen from 1 choice [ 4.928569] usb 6-2: adding 6-2:1.0 (config #1, interface 0) [ 4.936571] usb 6-2:1.0: uevent [ 4.936591] usbhid 6-2:1.0: usb_probe_interface [ 4.936593] usbhid 6-2:1.0: usb_probe_interface - got id [ 4.951804] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input3 [ 4.954021] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 16, phase 8, 118 us [ 4.957056] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2/input0 [ 4.957090] drivers/usb/core/inode.c: creating file '002' [ 4.957123] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 4.957129] uhci_hcd 0000:00:1d.2: port 2 portsc 01a3,00 [ 4.957135] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 5.044296] lvm used greatest stack depth: 6848 bytes left [ 5.061029] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 5.163032] usb 7-2: new low speed USB device using uhci_hcd and address 2 [ 5.178669] kjournald starting. Commit interval 5 seconds [ 5.178682] EXT3-fs: mounted filesystem with ordered data mode. [ 5.278430] type=1404 audit(1236144887.278:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 5.304893] usb 7-2: skipped 1 descriptor after interface [ 5.304897] usb 7-2: New USB device found, idVendor=04b3, idProduct=310b [ 5.304899] usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.304957] usb 7-2: uevent [ 5.305009] usb 7-2: usb_probe_device [ 5.305011] usb 7-2: configuration #1 chosen from 1 choice [ 5.307897] usb 7-2: adding 7-2:1.0 (config #1, interface 0) [ 5.307912] usb 7-2:1.0: uevent [ 5.307953] usbhid 7-2:1.0: usb_probe_interface [ 5.307955] usbhid 7-2:1.0: usb_probe_interface - got id [ 5.321118] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input4 [ 5.326227] generic-usb 0003:04B3:310B.0002: input,hidraw1: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.2-2/input0 [ 5.326267] drivers/usb/core/inode.c: creating file '002' [ 5.326308] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 5.377561] SELinux: 8192 avtab hash slots, 172320 rules. [ 5.402823] SELinux: 8192 avtab hash slots, 172320 rules. [ 5.429198] SELinux: 8 users, 12 roles, 2301 types, 116 bools, 1 sens, 1024 cats [ 5.429201] SELinux: 72 classes, 172320 rules [ 5.430974] SELinux: class kernel_service not defined in policy [ 5.430981] SELinux: permission open in class dir not defined in policy [ 5.430984] SELinux: permission open in class file not defined in policy [ 5.430987] SELinux: permission open in class chr_file not defined in policy [ 5.430988] SELinux: permission open in class blk_file not defined in policy [ 5.430990] SELinux: permission open in class fifo_file not defined in policy [ 5.431134] SELinux: the above unknown classes and permissions will be allowed [ 5.431136] SELinux: Completing initialization. [ 5.431137] SELinux: Setting up existing superblocks. [ 5.449660] SELinux: initialized (dev dm-0, type ext3), uses xattr [ 5.449719] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.449974] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 5.449984] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 5.450002] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 5.450019] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 5.450023] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 5.450032] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 5.450035] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.450061] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 5.450063] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 5.450067] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 5.450101] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 5.450106] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 5.450115] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 5.450118] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 5.450161] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 5.454144] usb usb3: suspend_rh (auto-stop) [ 5.454163] usb usb4: suspend_rh (auto-stop) [ 5.454186] usb usb5: suspend_rh (auto-stop) [ 5.460252] type=1403 audit(1236144887.460:3): policy loaded auid=4294967295 ses=4294967295 [ 5.939238] runlevel used greatest stack depth: 6672 bytes left [ 5.988848] hostname used greatest stack depth: 6356 bytes left [ 6.102359] mount used greatest stack depth: 6004 bytes left [ 6.691850] touch used greatest stack depth: 5980 bytes left [ 6.701134] hub 1-0:1.0: hub_suspend [ 6.701140] usb usb1: bus auto-suspend [ 6.701142] ehci_hcd 0000:00:1a.7: suspend root hub [ 6.701157] hub 3-0:1.0: hub_suspend [ 6.701159] usb usb3: bus auto-suspend [ 6.701161] usb usb3: suspend_rh [ 6.701173] hub 4-0:1.0: hub_suspend [ 6.701176] usb usb4: bus auto-suspend [ 6.701177] usb usb4: suspend_rh [ 6.701189] hub 5-0:1.0: hub_suspend [ 6.701191] usb usb5: bus auto-suspend [ 6.701192] usb usb5: suspend_rh [ 6.701204] hub 2-0:1.0: hub_suspend [ 6.701206] usb usb2: bus auto-suspend [ 6.701207] ehci_hcd 0000:00:1d.7: suspend root hub [ 7.411099] usb usb3: uevent [ 7.411113] usb 3-0:1.0: uevent [ 7.411187] usb usb4: uevent [ 7.411201] usb 4-0:1.0: uevent [ 7.411270] usb usb1: uevent [ 7.411283] usb 1-0:1.0: uevent [ 7.411580] usb usb5: uevent [ 7.411594] usb 5-0:1.0: uevent [ 7.411663] usb usb6: uevent [ 7.411676] usb 6-0:1.0: uevent [ 7.411704] usb 6-2: uevent [ 7.411718] usb 6-2:1.0: uevent [ 7.411869] usb usb7: uevent [ 7.411883] usb 7-0:1.0: uevent [ 7.411909] usb 7-2: uevent [ 7.411924] usb 7-2:1.0: uevent [ 7.412088] usb usb2: uevent [ 7.412102] usb 2-0:1.0: uevent [ 8.687459] ip used greatest stack depth: 5856 bytes left [ 9.514571] type=1400 audit(1236144891.968:4): avc: denied { execute } for pid=1746 comm="rhgb" path="/opt/X11R7.Q1/lib/libXft.so.2.1.2" dev=dm-0 ino=4948015 scontext=system_u:system_r:rhgb_t:s0 tcontext=unconfined_u:object_r:usr_t:s0 tclass=file [ 10.574874] EXT3 FS on dm-0, internal journal [ 10.683964] kjournald starting. Commit interval 5 seconds [ 10.684168] EXT3 FS on sda1, internal journal [ 10.684172] EXT3-fs: mounted filesystem with ordered data mode. [ 10.691625] SELinux: initialized (dev sda1, type ext3), uses xattr [ 10.691847] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 11.307881] Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k [ 11.309633] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 11.722672] microcode: CPU0 updated from revision 0xb3 to 0xb6, date = 2007-07-13 [ 11.728779] microcode: CPU1 updated from revision 0xb3 to 0xb6, date = 2007-07-13 [ 13.474939] warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. [ 13.795133] usb usb5: usb auto-resume [ 13.795136] usb usb5: wakeup_rh [ 13.827023] hub 5-0:1.0: hub_resume [ 13.827086] usb usb4: usb auto-resume [ 13.827089] usb usb4: wakeup_rh [ 13.827095] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 13.859020] hub 4-0:1.0: hub_resume [ 13.859071] usb usb3: usb auto-resume [ 13.859073] usb usb3: wakeup_rh [ 13.859079] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 13.891027] hub 3-0:1.0: hub_resume [ 13.891079] usb usb2: usb auto-resume [ 13.891082] ehci_hcd 0000:00:1d.7: resume root hub [ 13.891086] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 13.932024] hub 2-0:1.0: hub_resume [ 13.932092] usb usb1: usb auto-resume [ 13.932095] ehci_hcd 0000:00:1a.7: resume root hub [ 13.932100] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 13.952142] hub 1-0:1.0: hub_resume [ 13.952200] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 14.954037] usb usb5: suspend_rh (auto-stop) [ 14.954057] usb usb4: suspend_rh (auto-stop) [ 14.954075] usb usb3: suspend_rh (auto-stop) [ 16.701153] hub 5-0:1.0: hub_suspend [ 16.701160] usb usb5: bus auto-suspend [ 16.701162] usb usb5: suspend_rh [ 16.701176] hub 4-0:1.0: hub_suspend [ 16.701179] usb usb4: bus auto-suspend [ 16.701181] usb usb4: suspend_rh [ 16.701193] hub 3-0:1.0: hub_suspend [ 16.701196] usb usb3: bus auto-suspend [ 16.701198] usb usb3: suspend_rh [ 16.701210] hub 2-0:1.0: hub_suspend [ 16.701213] usb usb2: bus auto-suspend [ 16.701215] ehci_hcd 0000:00:1d.7: suspend root hub [ 16.701232] hub 1-0:1.0: hub_suspend [ 16.701235] usb usb1: bus auto-suspend [ 16.701236] ehci_hcd 0000:00:1a.7: suspend root hub [ 19.321158] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 93 us [ 19.357274] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 19.408187] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 19.408457] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.993998] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 20.994003] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 20.994671] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.795021] eth0: no IPv6 routers present [ 110.123217] [drm] TMDS-8: set mode 1280x1024 15 [ 180.721873] SysRq : force restore of fb console