X.Org X Server 1.5.99.903 (1.6.0 RC 3) Release Date: 2009-2-17 X Protocol Version 11, Revision 0 Build Operating System: Linux_2.6.22.18-server-1mdv Mandriva Current Operating System: Linux localhost 2.6.29-desktop-0.rc5.4.1mnb #1 SMP Fri Feb 20 09:37:50 EST 2009 x86_64 Build Date: 23 February 2009 04:55:29AM Before reporting problems, check http://qa.mandriva.com to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 24 20:58:26 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "LVDS-1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (**) |-->Input Device "Mouse1" (**) Option "AllowMouseOpenFail" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins (==) ModulePath set to "/usr/lib64/xorg/modules" (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Keyboard1 (WW) Disabling Mouse1 (II) Loader magic: 0xbc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000ec00/8 (--) PCI: (0@0:2:1) Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe800000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.5.99.903, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.99.903, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.99.903, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "v4l" (II) Loading /usr/lib64/xorg/modules/drivers//v4l_drv.so (II) Module v4l: vendor="X.Org Foundation" compiled for 1.5.99.3, module version = 0.1.1 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.99.903, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension Multi-Buffering (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (WW) Warning, couldn't open module freetype (II) UnloadModule: "freetype" (EE) Failed to load module "freetype" (module does not exist, 0) (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.99.903, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.99.903, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "intel" (II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 2.6.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) v4l driver for Video4Linux (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for v4l (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib64/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.99.903, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "AccelMethod" "UXA" (**) intel(0): Option "ModeDebug" "Yes" (II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43 (--) intel(0): Chipset: "G45/G43" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFE400000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (**) intel(0): Using UXA for acceleration (II) intel(0): Hardware state on X startup: (II) intel(0): DumpRegsBegin (II) intel(0): CHDECMISC: 0x00000011 (none, ch2 enh enabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep present) (II) intel(0): C0DRB0: 0x00200010 (0x0010) (II) intel(0): C0DRB1: 0x00200020 (0x0020) (II) intel(0): C0DRB2: 0x00200020 (0x0020) (II) intel(0): C0DRB3: 0x86860020 (0x0020) (II) intel(0): C1DRB0: 0x00100008 (0x0008) (II) intel(0): C1DRB1: 0x00100010 (0x0010) (II) intel(0): C1DRB2: 0x00100010 (0x0010) (II) intel(0): C1DRB3: 0x87870010 (0x0010) (II) intel(0): C0DRA01: 0x00008686 (0x8686) (II) intel(0): C0DRA23: 0x00000000 (0x0000) (II) intel(0): C1DRA01: 0x00008787 (0x8787) (II) intel(0): C1DRA23: 0x00000000 (0x0000) (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2) (II) intel(0): DPLL_TEST: 0x00010001 () (II) intel(0): CACHE_MODE_0: 0x00006820 (II) intel(0): D_STATE: 0x00000000 (II) intel(0): DSPCLK_GATE_D: 0x00040000 (clock gates disabled: DSSUNIT) (II) intel(0): RENCLK_GATE_D1: 0x00000000 (II) intel(0): RENCLK_GATE_D2: 0x00000000 (II) intel(0): SDVOB: 0x8000009c (enabled, pipe A, stall disabled, detected) (II) intel(0): SDVOC: 0x00000018 (disabled, pipe A, stall disabled, not detected) (II) intel(0): SDVOUDI: 0x00000000 (II) intel(0): DSPARB: 0x00000000 (II) intel(0): DSPFW1: 0x3f8f0f0f (II) intel(0): DSPFW2: 0x150f0f0f (II) intel(0): DSPFW3: 0x00000000 (II) intel(0): ADPA: 0x00008c18 (disabled, pipe A, +hsync, +vsync) (II) intel(0): LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel) (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOB: 0x8000009c (enabled, pipe A, no stall, +hsync, +vsync) (II) intel(0): DVOC: 0x00000018 (disabled, pipe A, no stall, +hsync, +vsync) (II) intel(0): DVOA_SRCDIM: 0x00000000 (II) intel(0): DVOB_SRCDIM: 0x00000000 (II) intel(0): DVOC_SRCDIM: 0x00000000 (II) intel(0): PP_CONTROL: 0x00000000 (power target: off) (II) intel(0): PP_STATUS: 0x00000000 (off, not ready, sequencing idle) (II) intel(0): PP_ON_DELAYS: 0x00000000 (II) intel(0): PP_OFF_DELAYS: 0x00000000 (II) intel(0): PP_DIVISOR: 0x00000000 (II) intel(0): PFIT_CONTROL: 0x80000000 (II) intel(0): PFIT_PGM_RATIOS: 0x06180618 (II) intel(0): PORT_HOTPLUG_EN: 0x00000020 (II) intel(0): PORT_HOTPLUG_STAT: 0x00000b00 (II) intel(0): DSPACNTR: 0x18000000 (disabled, pipe A) (II) intel(0): DSPASTRIDE: 0x00000c80 (3200 bytes) (II) intel(0): DSPAPOS: 0x00000000 (0, 0) (II) intel(0): DSPASIZE: 0x00000000 (1, 1) (II) intel(0): DSPABASE: 0x00000000 (II) intel(0): DSPASURF: 0x00000000 (II) intel(0): DSPATILEOFF: 0x00000000 (II) intel(0): PIPEACONF: 0xc0000000 (enabled, active) (II) intel(0): PIPEASRC: 0x027f018f (640, 400) (II) intel(0): PIPEASTAT: 0x00000206 (status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS) (II) intel(0): FPA0: 0x00021506 (n = 2, m1 = 21, m2 = 6) (II) intel(0): FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_A: 0xd4020c00 (enabled, dvo, default clock, DAC/serial mode, p1 = 2, p2 = 10) (II) intel(0): DPLL_A_MD: 0x00000003 (II) intel(0): HTOTAL_A: 0x0853068f (1680 active, 2132 total) (II) intel(0): HBLANK_A: 0x0853068f (1680 start, 2132 end) (II) intel(0): HSYNC_A: 0x07b506f1 (1778 start, 1974 end) (II) intel(0): VTOTAL_A: 0x04820419 (1050 active, 1155 total) (II) intel(0): VBLANK_A: 0x04820419 (1050 start, 1155 end) (II) intel(0): VSYNC_A: 0x0428041e (1055 start, 1065 end) (II) intel(0): BCLRPAT_A: 0x00000000 (II) intel(0): VSYNCSHIFT_A: 0x00000000 (II) intel(0): DSPBCNTR: 0x01000000 (disabled, pipe B) (II) intel(0): DSPBSTRIDE: 0x00000000 (0 bytes) (II) intel(0): DSPBPOS: 0x00000000 (0, 0) (II) intel(0): DSPBSIZE: 0x00000000 (1, 1) (II) intel(0): DSPBBASE: 0x00000000 (II) intel(0): DSPBSURF: 0x00000000 (II) intel(0): DSPBTILEOFF: 0x00000000 (II) intel(0): PIPEBCONF: 0x00000000 (disabled, inactive) (II) intel(0): PIPEBSRC: 0x027f01df (640, 480) (II) intel(0): PIPEBSTAT: 0x00000000 (status:) (II) intel(0): FPB0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): FPB1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_B: 0x04020c00 (disabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 2, p2 = 10) (II) intel(0): DPLL_B_MD: 0x00000003 (II) intel(0): HTOTAL_B: 0x031f027f (640 active, 800 total) (II) intel(0): HBLANK_B: 0x03170287 (648 start, 792 end) (II) intel(0): HSYNC_B: 0x02ef028f (656 start, 752 end) (II) intel(0): VTOTAL_B: 0x020c01df (480 active, 525 total) (II) intel(0): VBLANK_B: 0x020401e7 (488 start, 517 end) (II) intel(0): VSYNC_B: 0x01eb01e9 (490 start, 492 end) (II) intel(0): BCLRPAT_B: 0x00000000 (II) intel(0): VSYNCSHIFT_B: 0x00000000 (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (II) intel(0): VCLK_POST_DIV: 0x00020002 (II) intel(0): VGACNTRL: 0x0224008e (enabled) (II) intel(0): TV_CTL: 0x00000010 (II) intel(0): TV_DAC: 0x00000000 (II) intel(0): TV_CSC_Y: 0x00000000 (II) intel(0): TV_CSC_Y2: 0x00000000 (II) intel(0): TV_CSC_U: 0x00000000 (II) intel(0): TV_CSC_U2: 0x00000000 (II) intel(0): TV_CSC_V: 0x00000000 (II) intel(0): TV_CSC_V2: 0x00000000 (II) intel(0): TV_CLR_KNOBS: 0x00000000 (II) intel(0): TV_CLR_LEVEL: 0x00000000 (II) intel(0): TV_H_CTL_1: 0x00000000 (II) intel(0): TV_H_CTL_2: 0x00000000 (II) intel(0): TV_H_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_1: 0x00000000 (II) intel(0): TV_V_CTL_2: 0x00000000 (II) intel(0): TV_V_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_4: 0x00000000 (II) intel(0): TV_V_CTL_5: 0x00000000 (II) intel(0): TV_V_CTL_6: 0x00000000 (II) intel(0): TV_V_CTL_7: 0x00000000 (II) intel(0): TV_SC_CTL_1: 0x00000000 (II) intel(0): TV_SC_CTL_2: 0x00000000 (II) intel(0): TV_SC_CTL_3: 0x00000000 (II) intel(0): TV_WIN_POS: 0x00000000 (II) intel(0): TV_WIN_SIZE: 0x00000000 (II) intel(0): TV_FILTER_CTL_1: 0x00000000 (II) intel(0): TV_FILTER_CTL_2: 0x00000000 (II) intel(0): TV_FILTER_CTL_3: 0x00000000 (II) intel(0): TV_CC_CONTROL: 0x00000000 (II) intel(0): TV_CC_DATA: 0x00000000 (II) intel(0): TV_H_LUMA_0: 0x00000000 (II) intel(0): TV_H_LUMA_59: 0x00000000 (II) intel(0): TV_H_CHROMA_0: 0x00000000 (II) intel(0): TV_H_CHROMA_59: 0x00000000 (II) intel(0): FBC_CFB_BASE: 0xffffffff (II) intel(0): FBC_LL_BASE: 0xffffffff (II) intel(0): FBC_CONTROL: 0xffffffff (II) intel(0): FBC_COMMAND: 0xffffffff (II) intel(0): FBC_STATUS: 0xffffffff (II) intel(0): FBC_CONTROL2: 0xffffffff (II) intel(0): FBC_FENCE_OFF: 0xffffffff (II) intel(0): FBC_MOD_NUM: 0xffffffff (II) intel(0): MI_MODE: 0x00000200 (II) intel(0): MI_ARB_STATE: 0x00000040 (II) intel(0): MI_RDRET_STATE: 0x00000000 (II) intel(0): ECOSKPD: 0x00000307 (II) intel(0): DP_B: 0x0000001c (II) intel(0): DPB_AUX_CH_CTL: 0x00050000 (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_C: 0x00000018 (II) intel(0): DPC_AUX_CH_CTL: 0x00050000 (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_D: 0x00000018 (II) intel(0): DPD_AUX_CH_CTL: 0x00050000 (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000 (II) intel(0): pipe A dot 147600 n 2 m1 21 m2 6 p1 2 p2 10 (II) intel(0): pipe B dot 100800 n 3 m1 17 m2 8 p1 2 p2 10 (II) intel(0): DumpRegsEnd (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section LVDS-1 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS) (II) intel(0): SDVOB: R: 02 41 01 01 01 5D 40 00 (Success) (II) intel(0): Output LVDS-1 using monitor section LVDS-1 (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE) (II) intel(0): SDVOB: R: C4 09 20 4E (Success) (II) intel(0): SDVOB: device VID/DID: 02:41.01, clock range 25.0MHz - 200.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: LVDS0 output reported (II) intel(0): SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: 40 00 (Success) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: A8 39 90 C4 61 1A 69 40 (Success) (II) intel(0): SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: 62 C4 5A 00 18 00 00 00 (Success) (II) intel(0): SDVOB: W: 11 40 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 18 (SDVO_CMD_GET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: A8 39 90 C4 61 1A 69 40 (Success) (II) intel(0): SDVOB: W: 19 (SDVO_CMD_GET_OUTPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: 62 C4 5A 00 18 00 00 00 (Success) (II) intel(0): Resizable framebuffer: available (1 4) (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): I2C bus "CRTDDC_E" initialized. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_E:ddc2" removed. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_E" removed. (II) intel(0): EDID for output VGA (II) intel(0): Not using default mode "640x350" (vrefresh out of range) (II) intel(0): Not using default mode "640x400" (vrefresh out of range) (II) intel(0): Not using default mode "720x400" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1280x960" (vrefresh out of range) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range) (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "832x624" (vrefresh out of range) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz) (II) intel(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz) (II) intel(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz) (II) intel(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz) (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) (II) intel(0): SDVOB: R: 40 00 (Success) (II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0. (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): EDID for output LVDS-1 (II) intel(0): Not using default mode "640x350" (vrefresh out of range) (II) intel(0): Not using default mode "640x400" (vrefresh out of range) (II) intel(0): Not using default mode "720x400" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1280x960" (vrefresh out of range) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1792x1344" (mode clock too high) (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range) (II) intel(0): Not using default mode "1856x1392" (mode clock too high) (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range) (II) intel(0): Not using default mode "1920x1440" (mode clock too high) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "832x624" (vrefresh out of range) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "2048x1536" (mode clock too high) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Printing probed modes for output LVDS-1 (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Output VGA connected (II) intel(0): Output LVDS-1 connected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA using initial mode 1600x1200 (II) intel(0): Output LVDS-1 using initial mode 1600x1200 (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 11 40 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 16 A8 39 90 C4 61 1A 69 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 17 62 C4 5A 00 18 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 14 A8 39 90 C4 61 1A 69 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 15 62 C4 5A 00 18 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): SDVOB: W: 05 40 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 131068 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.99.903, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x80000206 (WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS (WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 711936 total, 1 used (II) intel(0): I830CheckAvailableMemory: 2847740 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: 40 00 (Success) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: A8 39 90 C4 61 1A 69 40 (Success) (II) intel(0): SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: 62 C4 5A 00 18 00 00 00 (Success) (II) intel(0): SDVOB: W: 11 40 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 18 (SDVO_CMD_GET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: A8 39 90 C4 61 1A 69 40 (Success) (II) intel(0): SDVOB: W: 19 (SDVO_CMD_GET_OUTPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: 62 C4 5A 00 18 00 00 00 (Success) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x07fff000: end of stolen memory (II) intel(0): 0x07fff000-0x0fffffff: DRI memory manager (131076 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x07fff000: start of memory manager (II) intel(0): 0x08020000-0x087bdfff: front buffer (7800 kB) X tiled (II) intel(0): 0x08820000-0x0882efff: exa G965 state buffer (60 kB) (II) intel(0): 0x08830000-0x08839fff: HW cursors (40 kB) (II) intel(0): 0x10000000: end of memory manager (WW) intel(0): ESR is 0x00000001 (WW) intel(0): Existing errors found in hardware state. (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): Mode for pipe A: (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): chosen: dotclock 161828 vco 1618285 ((m 118, m1 20, m2 6), n 5, (p 10, p1 1, p2 10)) (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): Mode for pipe B: (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): chosen: dotclock 161828 vco 1618285 ((m 118, m1 20, m2 6), n 5, (p 10, p1 1, p2 10)) (II) intel(0): SDVOB: W: 07 40 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP) (II) intel(0): SDVOB: R: (Not supported) (II) intel(0): SDVOB: W: 11 40 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 16 48 3F 40 30 62 B0 32 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 17 40 C0 13 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 14 48 3F 40 30 62 B0 32 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 15 40 C0 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): SDVOB: W: 05 40 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): Hardware state at EnterVT: (II) intel(0): DumpRegsBegin (II) intel(0): CHDECMISC: 0x00000011 (none, ch2 enh enabled, ch1 enh disabled, ch0 enh disabled, flex disabled, ep present) (II) intel(0): C0DRB0: 0x00200010 (0x0010) (II) intel(0): C0DRB1: 0x00200020 (0x0020) (II) intel(0): C0DRB2: 0x00200020 (0x0020) (II) intel(0): C0DRB3: 0x86860020 (0x0020) (II) intel(0): C1DRB0: 0x00100008 (0x0008) (II) intel(0): C1DRB1: 0x00100010 (0x0010) (II) intel(0): C1DRB2: 0x00100010 (0x0010) (II) intel(0): C1DRB3: 0x87870010 (0x0010) (II) intel(0): C0DRA01: 0x00008686 (0x8686) (II) intel(0): C0DRA23: 0x00000000 (0x0000) (II) intel(0): C1DRA01: 0x00008787 (0x8787) (II) intel(0): C1DRA23: 0x00000000 (0x0000) (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2) (II) intel(0): DPLL_TEST: 0x00010001 () (II) intel(0): CACHE_MODE_0: 0x00006820 (II) intel(0): D_STATE: 0x00000000 (II) intel(0): DSPCLK_GATE_D: 0x1000000c (clock gates disabled: VRHUNIT OVRUNIT OVCUNIT) (II) intel(0): RENCLK_GATE_D1: 0x00000000 (II) intel(0): RENCLK_GATE_D2: 0x000002c0 (II) intel(0): SDVOB: 0xc000009c (enabled, pipe B, stall disabled, detected) (II) intel(0): SDVOC: 0x00000018 (disabled, pipe A, stall disabled, not detected) (II) intel(0): SDVOUDI: 0x00000000 (II) intel(0): DSPARB: 0x00000000 (II) intel(0): DSPFW1: 0x3f8f0f0f (II) intel(0): DSPFW2: 0x150f0f0f (II) intel(0): DSPFW3: 0x00000000 (II) intel(0): ADPA: 0x80000018 (enabled, pipe A, +hsync, +vsync) (II) intel(0): LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel) (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOB: 0xc000009c (enabled, pipe B, no stall, +hsync, +vsync) (II) intel(0): DVOC: 0x00000018 (disabled, pipe A, no stall, +hsync, +vsync) (II) intel(0): DVOA_SRCDIM: 0x00000000 (II) intel(0): DVOB_SRCDIM: 0x00000000 (II) intel(0): DVOC_SRCDIM: 0x00000000 (II) intel(0): PP_CONTROL: 0x00000000 (power target: off) (II) intel(0): PP_STATUS: 0x00000000 (off, not ready, sequencing idle) (II) intel(0): PP_ON_DELAYS: 0x00000000 (II) intel(0): PP_OFF_DELAYS: 0x00000000 (II) intel(0): PP_DIVISOR: 0x00000000 (II) intel(0): PFIT_CONTROL: 0x00000000 (II) intel(0): PFIT_PGM_RATIOS: 0x06180618 (II) intel(0): PORT_HOTPLUG_EN: 0x00000020 (II) intel(0): PORT_HOTPLUG_STAT: 0x00000b00 (II) intel(0): DSPACNTR: 0xd8000400 (enabled, pipe A) (II) intel(0): DSPASTRIDE: 0x00001a00 (6656 bytes) (II) intel(0): DSPAPOS: 0x00000000 (0, 0) (II) intel(0): DSPASIZE: 0x00000000 (1, 1) (II) intel(0): DSPABASE: 0x00000000 (II) intel(0): DSPASURF: 0x08020000 (II) intel(0): DSPATILEOFF: 0x00000000 (II) intel(0): PIPEACONF: 0xc0000000 (enabled, active) (II) intel(0): PIPEASRC: 0x063f04af (1600, 1200) (II) intel(0): PIPEASTAT: 0x00000206 (status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS) (II) intel(0): FPA0: 0x00051406 (n = 5, m1 = 20, m2 = 6) (II) intel(0): FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_A: 0x94010c00 (enabled, non-dvo, default clock, DAC/serial mode, p1 = 1, p2 = 10) (II) intel(0): DPLL_A_MD: 0x00000000 (II) intel(0): HTOTAL_A: 0x086f063f (1600 active, 2160 total) (II) intel(0): HBLANK_A: 0x086f063f (1600 start, 2160 end) (II) intel(0): HSYNC_A: 0x073f067f (1664 start, 1856 end) (II) intel(0): VTOTAL_A: 0x04e104af (1200 active, 1250 total) (II) intel(0): VBLANK_A: 0x04e104af (1200 start, 1250 end) (II) intel(0): VSYNC_A: 0x04b304b0 (1201 start, 1204 end) (II) intel(0): BCLRPAT_A: 0x00000000 (II) intel(0): VSYNCSHIFT_A: 0x00000000 (II) intel(0): DSPBCNTR: 0xd9000400 (enabled, pipe B) (II) intel(0): DSPBSTRIDE: 0x00001a00 (6656 bytes) (II) intel(0): DSPBPOS: 0x00000000 (0, 0) (II) intel(0): DSPBSIZE: 0x00000000 (1, 1) (II) intel(0): DSPBBASE: 0x00000000 (II) intel(0): DSPBSURF: 0x08020000 (II) intel(0): DSPBTILEOFF: 0x00000000 (II) intel(0): PIPEBCONF: 0xc0000000 (enabled, active) (II) intel(0): PIPEBSRC: 0x063f04af (1600, 1200) (II) intel(0): PIPEBSTAT: 0x00000206 (status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS) (II) intel(0): FPB0: 0x00051406 (n = 5, m1 = 20, m2 = 6) (II) intel(0): FPB1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_B: 0xd4010c00 (enabled, dvo, default clock, DAC/serial mode, p1 = 1, p2 = 10) (II) intel(0): DPLL_B_MD: 0x00000000 (II) intel(0): HTOTAL_B: 0x086f063f (1600 active, 2160 total) (II) intel(0): HBLANK_B: 0x086f063f (1600 start, 2160 end) (II) intel(0): HSYNC_B: 0x073f067f (1664 start, 1856 end) (II) intel(0): VTOTAL_B: 0x04e104af (1200 active, 1250 total) (II) intel(0): VBLANK_B: 0x04e104af (1200 start, 1250 end) (II) intel(0): VSYNC_B: 0x04b304b0 (1201 start, 1204 end) (II) intel(0): BCLRPAT_B: 0x00000000 (II) intel(0): VSYNCSHIFT_B: 0x00000000 (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (II) intel(0): VCLK_POST_DIV: 0x00020002 (II) intel(0): VGACNTRL: 0x8024008e (disabled) (II) intel(0): TV_CTL: 0x00000010 (II) intel(0): TV_DAC: 0x00000000 (II) intel(0): TV_CSC_Y: 0x00000000 (II) intel(0): TV_CSC_Y2: 0x00000000 (II) intel(0): TV_CSC_U: 0x00000000 (II) intel(0): TV_CSC_U2: 0x00000000 (II) intel(0): TV_CSC_V: 0x00000000 (II) intel(0): TV_CSC_V2: 0x00000000 (II) intel(0): TV_CLR_KNOBS: 0x00000000 (II) intel(0): TV_CLR_LEVEL: 0x00000000 (II) intel(0): TV_H_CTL_1: 0x00000000 (II) intel(0): TV_H_CTL_2: 0x00000000 (II) intel(0): TV_H_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_1: 0x00000000 (II) intel(0): TV_V_CTL_2: 0x00000000 (II) intel(0): TV_V_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_4: 0x00000000 (II) intel(0): TV_V_CTL_5: 0x00000000 (II) intel(0): TV_V_CTL_6: 0x00000000 (II) intel(0): TV_V_CTL_7: 0x00000000 (II) intel(0): TV_SC_CTL_1: 0x00000000 (II) intel(0): TV_SC_CTL_2: 0x00000000 (II) intel(0): TV_SC_CTL_3: 0x00000000 (II) intel(0): TV_WIN_POS: 0x00000000 (II) intel(0): TV_WIN_SIZE: 0x00000000 (II) intel(0): TV_FILTER_CTL_1: 0x00000000 (II) intel(0): TV_FILTER_CTL_2: 0x00000000 (II) intel(0): TV_FILTER_CTL_3: 0x00000000 (II) intel(0): TV_CC_CONTROL: 0x00000000 (II) intel(0): TV_CC_DATA: 0x00000000 (II) intel(0): TV_H_LUMA_0: 0x00000000 (II) intel(0): TV_H_LUMA_59: 0x00000000 (II) intel(0): TV_H_CHROMA_0: 0x00000000 (II) intel(0): TV_H_CHROMA_59: 0x00000000 (II) intel(0): FBC_CFB_BASE: 0xffffffff (II) intel(0): FBC_LL_BASE: 0xffffffff (II) intel(0): FBC_CONTROL: 0xffffffff (II) intel(0): FBC_COMMAND: 0xffffffff (II) intel(0): FBC_STATUS: 0xffffffff (II) intel(0): FBC_CONTROL2: 0xffffffff (II) intel(0): FBC_FENCE_OFF: 0xffffffff (II) intel(0): FBC_MOD_NUM: 0xffffffff (II) intel(0): MI_MODE: 0x00000200 (II) intel(0): MI_ARB_STATE: 0x00000040 (II) intel(0): MI_RDRET_STATE: 0x00000000 (II) intel(0): ECOSKPD: 0x00000307 (II) intel(0): DP_B: 0x0000001c (II) intel(0): DPB_AUX_CH_CTL: 0x00050000 (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_C: 0x00000018 (II) intel(0): DPC_AUX_CH_CTL: 0x00050000 (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_D: 0x00000018 (II) intel(0): DPD_AUX_CH_CTL: 0x00050000 (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000 (II) intel(0): pipe A dot 161828 n 5 m1 20 m2 6 p1 1 p2 10 (II) intel(0): pipe B dot 161828 n 5 m1 20 m2 6 p1 1 p2 10 (II) intel(0): DumpRegsEnd (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output LVDS-1 is connected to pipe B (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 423 x 317 (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): SDVOB: W: 05 40 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) config/hal: Adding input device Sony Vaio Keys (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 2.1.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Sony Vaio Keys: always reports core events (**) Sony Vaio Keys: Device: "/dev/input/event6" (II) Sony Vaio Keys: Found keys (II) Sony Vaio Keys: Configuring as keyboard (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Power Button (CM) (**) Power Button (CM): always reports core events (**) Power Button (CM): Device: "/dev/input/event5" (II) Power Button (CM): Found keys (II) Power Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Power Button (FF) (**) Power Button (FF): always reports core events (**) Power Button (FF): Device: "/dev/input/event4" (II) Power Button (FF): Found keys (II) Power Button (FF): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Innovace USB Keyboard (**) Innovace USB Keyboard: always reports core events (**) Innovace USB Keyboard: Device: "/dev/input/event3" (II) Innovace USB Keyboard: Found 5 mouse buttons (II) Innovace USB Keyboard: Found keys (II) Innovace USB Keyboard: Configuring as keyboard (**) Innovace USB Keyboard: YAxisMapping: buttons 4 and 5 (**) Innovace USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Innovace USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device Innovace USB Keyboard (**) Innovace USB Keyboard: always reports core events (**) Innovace USB Keyboard: Device: "/dev/input/event2" (II) Innovace USB Keyboard: Found keys (II) Innovace USB Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Innovace USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "compose:rwin" (II) config/hal: Adding input device OPM-U06 (**) OPM-U06: always reports core events (**) OPM-U06: Device: "/dev/input/event1" (II) OPM-U06: Found 5 mouse buttons (II) OPM-U06: Found x and y relative axes (II) OPM-U06: Configuring as mouse (**) OPM-U06: YAxisMapping: buttons 4 and 5 (**) OPM-U06: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "OPM-U06" (type: MOUSE) (**) OPM-U06: (accel) keeping acceleration scheme 1 (**) OPM-U06: (accel) filter chain progression: 2.00 (**) OPM-U06: (accel) filter stage 0: 20.00 ms (**) OPM-U06: (accel) set acceleration profile 0 (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): Allocate new frame buffer 1400x1050 stride 1408 (II) intel(0): New front buffer at 0xd0f3000 (II) intel(0): Mode for pipe A: (II) intel(0): Modeline "(null)"x0.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz) (II) intel(0): chosen: dotclock 121600 vco 2432000 ((m 76, m1 11, m2 9), n 1, (p 20, p1 2, p2 10)) (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): Mode for pipe B: (II) intel(0): Modeline "(null)"x0.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz) (II) intel(0): chosen: dotclock 121600 vco 2432000 ((m 76, m1 11, m2 9), n 1, (p 20, p1 2, p2 10)) (II) intel(0): SDVOB: W: 07 40 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP) (II) intel(0): SDVOB: R: (Not supported) (II) intel(0): SDVOB: W: 11 40 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 16 A8 2F 78 E0 51 1A 20 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 17 58 98 2C 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 14 A8 2F 78 E0 51 1A 20 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 15 58 98 2C 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 00 (Success) (EE) intel(0): First SDVOB output reported failure to sync (II) intel(0): SDVOB: W: 05 40 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success)