[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f65c800 (usable) [ 0.000000] BIOS-e820: 000000007f65c800 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 521820) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521820 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521820 [ 0.000000] On node 0 totalpages: 521820 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2284 pages used for memmap [ 0.000000] HighMem zone: 290160 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBAF0 checksum 0 [ 0.000000] ACPI: RSDP 000FBAF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 7F65E200, 0064 (r1 DELL M09 27D8071E ASL 61) [ 0.000000] ACPI: FACP 7F65E09C, 00F4 (r4 DELL M09 27D8071E ASL 61) [ 0.000000] ACPI: DSDT 7F65E800, 521C (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7F66D000, 0040 [ 0.000000] ACPI: HPET 7F65E300, 0038 (r1 DELL M09 1 ASL 61) [ 0.000000] ACPI: APIC 7F65E400, 0068 (r1 DELL M09 27D8071E ASL 47) [ 0.000000] ACPI: MCFG 7F65E3C0, 003E (r16 DELL M09 27D8071E ASL 61) [ 0.000000] ACPI: SLIC 7F65E49C, 0176 (r1 DELL M09 27D8071E ASL 61) [ 0.000000] ACPI: OSFR 7F65DA00, 0086 (r1 DELL M09 27D8071E ASL 61) [ 0.000000] ACPI: BOOT 7F65DFC0, 0028 (r1 DELL M09 27D8071E ASL 61) [ 0.000000] ACPI: SSDT 7F65C9FA, 04D4 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517744 [ 0.000000] Kernel command line: root=UUID=57b3fbae-c6c6-441a-88e0-8314e9882560 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.115 MHz processor. [ 8.750869] Console: colour VGA+ 80x25 [ 8.750872] console [tty0] enabled [ 8.751164] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 8.751444] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 8.830700] Memory: 2057428k/2087280k available (2157k kernel code, 28536k reserved, 998k data, 364k init, 1169776k highmem) [ 8.830706] virtual kernel memory layout: [ 8.830706] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 8.830707] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 8.830708] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 8.830709] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 8.830710] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 8.830711] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 8.830712] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 8.830714] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 8.830753] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 8.830884] hpet clockevent registered [ 8.910847] Calibrating delay using timer specific routine.. 3994.64 BogoMIPS (lpj=7989294) [ 8.910868] Security Framework initialized [ 8.910874] SELinux: Disabled at boot. [ 8.910886] AppArmor: AppArmor initialized [ 8.910889] Failure registering capabilities with primary security module. [ 8.910897] Mount-cache hash table entries: 512 [ 8.911010] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 8.911018] monitor/mwait feature present. [ 8.911019] using mwait in idle threads. [ 8.911023] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8.911025] CPU: L2 cache: 2048K [ 8.911027] CPU: Physical Processor ID: 0 [ 8.911028] CPU: Processor Core ID: 0 [ 8.911030] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 8.911039] Compat vDSO mapped to ffffe000. [ 8.911050] Checking 'hlt' instruction... OK. [ 8.927172] SMP alternatives: switching to UP code [ 8.928583] Early unpacking initramfs... done [ 9.213338] ACPI: Core revision 20070126 [ 9.213375] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 9.253129] CPU0: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz stepping 0d [ 9.253143] SMP alternatives: switching to SMP code [ 9.253746] Booting processor 1/1 eip 3000 [ 9.263928] Initializing CPU#1 [ 9.342600] Calibrating delay using timer specific routine.. 3989.96 BogoMIPS (lpj=7979922) [ 9.342606] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 9.342610] monitor/mwait feature present. [ 9.342613] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.342614] CPU: L2 cache: 2048K [ 9.342616] CPU: Physical Processor ID: 0 [ 9.342617] CPU: Processor Core ID: 1 [ 9.342618] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 9.343075] CPU1: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz stepping 0d [ 9.343095] Total of 2 processors activated (7984.60 BogoMIPS). [ 9.343295] ENABLING IO-APIC IRQs [ 9.343485] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 9.490619] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 9.510621] Brought up 2 CPUs [ 9.510642] CPU0 attaching sched-domain: [ 9.510645] domain 0: span 03 [ 9.510646] groups: 01 02 [ 9.510649] CPU1 attaching sched-domain: [ 9.510650] domain 0: span 03 [ 9.510652] groups: 02 01 [ 9.510828] net_namespace: 64 bytes [ 9.510837] Booting paravirtualized kernel on bare hardware [ 9.511253] Time: 20:00:46 Date: 11/27/08 [ 9.511276] NET: Registered protocol family 16 [ 9.511428] EISA bus registered [ 9.511432] ACPI: bus type pci registered [ 9.522074] PCI: PCI BIOS revision 2.10 entry at 0xfac86, last bus=14 [ 9.522075] PCI: Using configuration type 1 [ 9.522077] Setting up standard PCI resources [ 9.529396] ACPI: EC: Look up EC in DSDT [ 9.595353] ACPI: SSDT 7F66D080, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 9.595501] ACPI: Interpreter enabled [ 9.595504] ACPI: (supports S0 S3 S4 S5) [ 9.595515] ACPI: Using IOAPIC for interrupt routing [ 9.614587] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 9.615634] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 9.615638] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 9.617145] PCI: Transparent bridge - 0000:00:1e.0 [ 9.617196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 9.617596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 9.617732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 9.617836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 9.617937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 9.618038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 9.627386] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) [ 9.627485] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 9.627583] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3 [ 9.627671] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. [ 9.627769] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 9.627868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 9.627967] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 9.628057] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 9.628179] Linux Plug and Play Support v0.97 (c) Adam Belay [ 9.628206] pnp: PnP ACPI init [ 9.628213] ACPI: bus type pnp registered [ 9.664188] pnpacpi: exceeded the max number of mem resources: 12 [ 9.664363] pnp: PnP ACPI: found 13 devices [ 9.664365] ACPI: ACPI bus type pnp unregistered [ 9.664368] PnPBIOS: Disabled by ACPI PNP [ 9.664542] PCI: Using ACPI for IRQ routing [ 9.664544] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 9.758379] NET: Registered protocol family 8 [ 9.758381] NET: Registered protocol family 20 [ 9.758408] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 9.758412] hpet0: 3 64-bit timers, 14318180 Hz [ 9.759442] AppArmor: AppArmor Filesystem Enabled [ 9.762371] Time: tsc clocksource has been installed. [ 9.762378] Switched to high resolution mode on CPU 0 [ 9.762476] Switched to high resolution mode on CPU 1 [ 9.778349] system 00:06: ioport range 0xc80-0xcff could not be reserved [ 9.778356] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 9.778361] system 00:0a: ioport range 0x900-0x97f has been reserved [ 9.778364] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 9.778366] system 00:0a: ioport range 0x1000-0x1005 has been reserved [ 9.778368] system 00:0a: ioport range 0x1008-0x100f has been reserved [ 9.778373] system 00:0b: ioport range 0xf400-0xf4fe has been reserved [ 9.778375] system 00:0b: ioport range 0x1006-0x1007 has been reserved [ 9.778378] system 00:0b: ioport range 0x100a-0x1059 could not be reserved [ 9.778380] system 00:0b: ioport range 0x1060-0x107f has been reserved [ 9.778382] system 00:0b: ioport range 0x1080-0x10bf has been reserved [ 9.778384] system 00:0b: ioport range 0x10c0-0x10df has been reserved [ 9.778386] system 00:0b: ioport range 0x1010-0x102f has been reserved [ 9.778389] system 00:0b: ioport range 0x809-0x809 has been reserved [ 9.778394] system 00:0c: iomem range 0x0-0x9efff could not be reserved [ 9.778396] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved [ 9.778398] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 9.778401] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 9.778403] system 00:0c: iomem range 0x100000-0x7f65c7ff could not be reserved [ 9.778405] system 00:0c: iomem range 0x7f65c800-0x7f6fffff could not be reserved [ 9.778408] system 00:0c: iomem range 0x7f700000-0x7f7fffff could not be reserved [ 9.778410] system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved [ 9.778413] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved [ 9.778415] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 9.778417] system 00:0c: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 9.778420] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 9.808758] PCI: Bridge: 0000:00:1c.0 [ 9.808759] IO window: disabled. [ 9.808765] MEM window: disabled. [ 9.808769] PREFETCH window: disabled. [ 9.808775] PCI: Bridge: 0000:00:1c.1 [ 9.808776] IO window: disabled. [ 9.808782] MEM window: f6c00000-f6cfffff [ 9.808786] PREFETCH window: disabled. [ 9.808792] PCI: Bridge: 0000:00:1c.3 [ 9.808795] IO window: d000-dfff [ 9.808801] MEM window: f6a00000-f6bfffff [ 9.808805] PREFETCH window: f0000000-f01fffff [ 9.808811] PCI: Bridge: 0000:00:1c.5 [ 9.808812] IO window: disabled. [ 9.808818] MEM window: f6900000-f69fffff [ 9.808822] PREFETCH window: disabled. [ 9.808829] PCI: Bridge: 0000:00:1e.0 [ 9.808830] IO window: disabled. [ 9.808835] MEM window: f6800000-f68fffff [ 9.808839] PREFETCH window: disabled. [ 9.808870] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 9.808877] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 9.808902] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 9.808907] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 9.808932] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 9.808938] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 9.808962] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 9.808967] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 9.808981] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 9.808991] NET: Registered protocol family 2 [ 9.846331] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 9.846519] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 9.846892] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 9.847095] TCP: Hash tables configured (established 131072 bind 65536) [ 9.847097] TCP reno registered [ 9.858389] checking if image is initramfs... it is [ 10.418293] Freeing initrd memory: 7250k freed [ 10.418422] Simple Boot Flag at 0x79 set to 0x1 [ 10.418936] audit: initializing netlink socket (disabled) [ 10.418949] audit(1227816046.421:1): initialized [ 10.419132] highmem bounce pool size: 64 pages [ 10.420727] VFS: Disk quotas dquot_6.5.1 [ 10.420791] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.420906] io scheduler noop registered [ 10.420908] io scheduler anticipatory registered [ 10.420909] io scheduler deadline registered [ 10.420919] io scheduler cfq registered (default) [ 10.420929] Boot video device is 0000:00:02.0 [ 10.421155] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 10.421216] assign_interrupt_mode Found MSI capability [ 10.421269] Allocate Port Service[0000:00:1c.0:pcie00] [ 10.421296] Allocate Port Service[0000:00:1c.0:pcie02] [ 10.421392] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 10.421453] assign_interrupt_mode Found MSI capability [ 10.421501] Allocate Port Service[0000:00:1c.1:pcie00] [ 10.421526] Allocate Port Service[0000:00:1c.1:pcie02] [ 10.421624] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 10.421684] assign_interrupt_mode Found MSI capability [ 10.421732] Allocate Port Service[0000:00:1c.3:pcie00] [ 10.421758] Allocate Port Service[0000:00:1c.3:pcie02] [ 10.421855] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 10.421916] assign_interrupt_mode Found MSI capability [ 10.421964] Allocate Port Service[0000:00:1c.5:pcie00] [ 10.421994] Allocate Port Service[0000:00:1c.5:pcie02] [ 10.422222] isapnp: Scanning for PnP cards... [ 10.776483] isapnp: No Plug & Play device found [ 10.796938] Real Time Clock Driver v1.12ac [ 10.797066] hpet_resources: 0xfed00000 is busy [ 10.797117] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 10.798081] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 10.798138] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 10.798217] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 10.805323] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.805328] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 10.821825] mice: PS/2 mouse device common for all mice [ 10.821916] EISA: Probing bus 0 at eisa.0 [ 10.821924] Cannot allocate resource for EISA slot 1 [ 10.821954] EISA: Detected 0 cards. [ 10.821956] cpuidle: using governor ladder [ 10.821958] cpuidle: using governor menu [ 10.822030] NET: Registered protocol family 1 [ 10.822053] Using IPI No-Shortcut mode [ 10.822087] registered taskstats version 1 [ 10.822195] Magic number: 0:145:44 [ 10.822198] hash matches device ttyed [ 10.822260] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 10.822262] EDD information not available. [ 10.822444] Freeing unused kernel memory: 364k freed [ 10.825935] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 12.004644] fuse init (API version 7.9) [ 12.023205] ACPI: SSDT 7F65D538, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 12.023375] ACPI: SSDT 7F65CECE, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 12.023854] Monitor-Mwait will be used to enter C-1 state [ 12.023857] Monitor-Mwait will be used to enter C-2 state [ 12.023859] Monitor-Mwait will be used to enter C-3 state [ 12.023957] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 12.023961] ACPI: Processor [CPU0] (supports 8 throttling states) [ 12.024140] ACPI: SSDT 7F65D77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 12.024295] ACPI: SSDT 7F65D4B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 12.024926] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 12.024931] ACPI: Processor [CPU1] (supports 8 throttling states) [ 12.035337] ACPI: Thermal Zone [THM] (25 C) [ 12.325147] usbcore: registered new interface driver usbfs [ 12.325166] usbcore: registered new interface driver hub [ 12.325629] usbcore: registered new device driver usb [ 12.327037] USB Universal Host Controller Interface driver v3.0 [ 12.327083] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 12.327093] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 12.327097] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 12.327306] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 12.327339] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f60 [ 12.327455] usb usb1: configuration #1 chosen from 1 choice [ 12.327475] hub 1-0:1.0: USB hub found [ 12.327479] hub 1-0:1.0: 2 ports detected [ 12.409977] SCSI subsystem initialized [ 12.428989] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 12.429002] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 12.429006] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 12.429028] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 12.429060] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f80 [ 12.429165] usb usb2: configuration #1 chosen from 1 choice [ 12.429185] hub 2-0:1.0: USB hub found [ 12.429189] hub 2-0:1.0: 2 ports detected [ 12.486682] libata version 3.00 loaded. [ 12.532941] tg3.c:v3.86 (November 9, 2007) [ 12.532982] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 12.532995] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 12.996607] Clocksource tsc unstable (delta = -1397740564 ns) [ 12.997602] Time: hpet clocksource has been installed. [ 13.005672] eth0: Tigon3 [partno(BCM95784M) rev 5784100 PHY(5784)] (PCI Express) 10/100/1000Base-T Ethernet 00:1d:09:bf:28:d9 [ 13.005678] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 13.005680] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 13.005715] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 13.005729] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 13.005734] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 13.005760] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 13.005789] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f00 [ 13.005895] usb usb3: configuration #1 chosen from 1 choice [ 13.005916] hub 3-0:1.0: USB hub found [ 13.005920] hub 3-0:1.0: 2 ports detected [ 13.015597] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 13.015611] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 13.015618] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 13.015652] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 13.015686] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f20 [ 13.015795] usb usb4: configuration #1 chosen from 1 choice [ 13.015813] hub 4-0:1.0: USB hub found [ 13.015817] hub 4-0:1.0: 2 ports detected [ 13.024128] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 13.024141] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 13.024147] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 13.024180] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 13.024218] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40 [ 13.024322] usb usb5: configuration #1 chosen from 1 choice [ 13.024344] hub 5-0:1.0: USB hub found [ 13.024347] hub 5-0:1.0: 2 ports detected [ 13.032667] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21 [ 13.032679] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 13.032682] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 13.032707] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 13.036609] ehci_hcd 0000:00:1a.7: debug port 1 [ 13.036616] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 13.036623] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400 [ 13.052352] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.052461] usb usb6: configuration #1 chosen from 1 choice [ 13.052481] hub 6-0:1.0: USB hub found [ 13.052487] hub 6-0:1.0: 4 ports detected [ 13.078923] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 13.078945] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 13.078951] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 13.078989] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 13.082901] ehci_hcd 0000:00:1d.7: debug port 1 [ 13.082908] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 13.082913] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000 [ 13.087874] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.088025] usb usb7: configuration #1 chosen from 1 choice [ 13.088064] hub 7-0:1.0: USB hub found [ 13.088071] hub 7-0:1.0: 6 ports detected [ 13.096905] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 13.149594] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f68ff800-f68fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 13.163889] ahci 0000:00:1f.2: version 3.0 [ 13.163929] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.231591] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 13.231597] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 13.231606] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 13.231891] scsi0 : ahci [ 13.232063] scsi1 : ahci [ 13.232195] scsi2 : ahci [ 13.232418] ata1: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfb900 irq 219 [ 13.232422] ata2: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfb980 irq 219 [ 13.232425] ata3: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfba00 irq 219 [ 13.250882] ieee1394: Host added: ID:BUS[0-00:1023] GUID[534fc0002610d1c2] [ 13.274660] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.316487] ata1.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133 [ 13.316493] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 13.317407] ata1.00: configured for UDMA/133 [ 13.345267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.370501] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD14, max UDMA/100 [ 13.393782] ata2.00: configured for UDMA/100 [ 13.412932] ata3: SATA link down (SStatus 0 SControl 300) [ 13.413174] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-7 01.0 PQ: 0 ANSI: 5 [ 13.414390] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640S HD14 PQ: 0 ANSI: 5 [ 13.422946] Driver 'sd' needs updating - please use bus_type methods [ 13.425116] Driver 'sr' needs updating - please use bus_type methods [ 13.426501] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 13.426555] sd 0:0:0:0: [sda] Write Protect is off [ 13.426560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.426644] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.426733] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 13.426766] sd 0:0:0:0: [sda] Write Protect is off [ 13.426768] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.426830] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.426832] sda: sda1 sda2 sda3 sda4 < sda5 > [ 13.505347] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.509526] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.509542] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 13.513048] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 13.513051] Uniform CD-ROM driver Revision: 3.20 [ 13.513090] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 13.785654] Attempting manual resume [ 13.785657] swsusp: Resume From Partition 8:5 [ 13.785659] PM: Checking swsusp image. [ 13.785844] PM: Resume from disk failed. [ 13.796980] EXT3-fs: INFO: recovery required on readonly filesystem. [ 13.796986] EXT3-fs: write access will be enabled during recovery. [ 13.936668] kjournald starting. Commit interval 5 seconds [ 13.936709] EXT3-fs: recovery complete. [ 13.937182] EXT3-fs: mounted filesystem with ordered data mode. [ 21.264538] Linux agpgart interface v0.102 [ 21.303729] agpgart: Detected an Intel 965GM Chipset. [ 21.304599] agpgart: Detected 7676K stolen memory. [ 21.317747] agpgart: AGP aperture is 256M @ 0xe0000000 [ 21.463768] ACPI: AC Adapter [AC] (on-line) [ 21.562620] ACPI: Battery Slot [BAT0] (battery absent) [ 21.594243] input: Lid Switch as /devices/virtual/input/input2 [ 21.595433] ACPI: Lid Switch [LID] [ 21.595488] input: Power Button (CM) as /devices/virtual/input/input3 [ 21.622424] ACPI: Power Button (CM) [PBTN] [ 21.622515] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 21.638400] ACPI: Sleep Button (CM) [SBTN] [ 21.656962] ACPI: WMI-Acer: Mapper loaded [ 21.724158] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2b/LNXVIDEO:00/input/input5 [ 21.746349] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 21.746979] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input6 [ 21.778324] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 21.778492] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input7 [ 21.810297] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 22.274064] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.301964] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.390005] iTCO_vendor_support: vendor-support=0 [ 22.403325] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 22.403393] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 22.403431] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.629850] ricoh-mmc: Ricoh MMC Controller disabling driver [ 22.629853] ricoh-mmc: Copyright(c) Philip Langdale [ 22.629910] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12) [ 22.629922] ricoh-mmc: Controller is now disabled. [ 22.669825] sdhci: Secure Digital Host Controller Interface driver [ 22.669828] sdhci: Copyright(c) Pierre Ossman [ 22.669867] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 22.669890] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22 [ 22.669949] mmc0: SDHCI at 0xf68ff400 irq 22 DMA [ 22.933755] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 23.226454] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 23.226474] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 23.350780] input: PS/2 Mouse as /devices/virtual/input/input9 [ 23.404718] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10 [ 23.463078] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 24.113959] lp: driver loaded but no devices found [ 24.205680] Adding 2016116k swap on /dev/sda5. Priority:-1 extents:1 across:2016116k [ 24.616549] EXT3 FS on sda3, internal journal [ 25.246362] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.710668] No dock devices found. [ 26.548783] apm: BIOS not found. [ 26.682109] ppdev: user-space parallel port driver [ 26.829377] audit(1227816068.494:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5141 profile="/usr/sbin/cupsd" namespace="default" [ 28.279806] Bluetooth: Core ver 2.11 [ 28.280149] NET: Registered protocol family 31 [ 28.280152] Bluetooth: HCI device and connection manager initialized [ 28.280156] Bluetooth: HCI socket layer initialized [ 28.308897] Bluetooth: L2CAP ver 2.9 [ 28.308903] Bluetooth: L2CAP socket layer initialized [ 28.393581] Bluetooth: RFCOMM socket layer initialized [ 28.393596] Bluetooth: RFCOMM TTY layer initialized [ 28.393599] Bluetooth: RFCOMM ver 1.8 [ 31.044859] [drm] Initialized drm 1.1.0 20060810 [ 31.047515] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 31.047525] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 31.047586] [drm] Initialized i915 1.6.0 20060119 on minor 0