X.Org X Server 1.5.1 Release Date: 23 September 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.18-107.el5xen i686 Current Operating System: Linux test 2.6.27-0.398.rc9.fc10.i686 #1 SMP Mon Oct 6 22:23:41 EDT 2008 i686 Build Date: 07 October 2008 12:12:21AM Build ID: xorg-x11-server 1.5.1-6.fc10 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 7 09:31:04 2008 (EE) Unable to locate/open config file (II) Loader magic: 0x81f3400 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0x30100000/0, 0x20000000/0, 0x30180000/0, I/O @ 0x000020e0/0 (==) Matched intel for the autoconfigured driver New driver is "intel" (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default fbdev Screen 0" Screen "Builtin Default vesa Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (1) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (2) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SELinux (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.1, module version = 2.5.96 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 0.3.1 ABI class: X.Org Video Driver, version 4.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.4.99.905, module version = 1.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) FBDEV: driver for framebuffer: fbdev (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.5.1, module version = 0.0.2 ABI class: X.Org Video Driver, version 4.1 (EE) open /dev/fb0: No such file or directory (WW) Falling back to old probe method for vesa (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.5.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.1 (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (==) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945G (--) intel(0): Chipset: "945G" (--) intel(0): Linear framebuffer at 0x20000000 (--) intel(0): IO registers at addr 0x30100000 (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_D" initialized. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_D:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_D:ddc2" removed. (II) intel(0): I2C device "CRTDDC_D:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_D" removed. (II) intel(0): I2C bus "CRTDDC_E" initialized. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_E:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_E:ddc2" removed. (II) intel(0): I2C device "CRTDDC_E:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_E" removed. (II) intel(0): Output VGA connected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA using initial mode 1024x768 (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 7932 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Intel XvMC decoder disabled (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.5.1, module version = 1.1.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules//libint10.so (II) intel(0): initializing int10 (WW) intel(0): Bad V_BIOS checksum (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 3.0 (II) intel(0): VESA VBE Total Mem: 7872 kB (II) intel(0): VESA VBE OEM: Intel(r) 82945G Chipset Family Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 1.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: Intel(r) 82945G Chipset Family Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.1, module version = 2.4.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00 (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x80000203 to 0x00000000 (WW) intel(0): PIPEASTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (WW) intel(0): PIPEASTAT after: status: (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 110336 total, 1 used (II) intel(0): I830CheckAvailableMemory: 441340 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card1 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card2 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card3 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card4 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card5 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card6 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card7 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card8 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card9 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card10 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card11 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card12 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card13 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card14 drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 14, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 14, (OK) drmGetBusid returned '' (II) [drm] loaded kernel module for "i915" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0x16020000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 12582912 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d3f5000 (pgoffset 54261) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical ) (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x007bf000-0x0d3f4fff: DRI memory manager (209112 kB) (II) intel(0): 0x0d3f5000-0x0dff4fff: exa offscreen (12288 kB) (II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x007bf000: start of memory manager (II) intel(0): 0x00800000-0x00bfffff: depth buffer (4096 kB) X tiled (II) intel(0): 0x00c00000-0x00ffffff: back buffer (4096 kB) X tiled (II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) X tiled (II) intel(0): 0x007df000-0x007e6fff: logical 3D context (32 kB) (II) intel(0): 0x0d3f5000: end of memory manager (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): [drm] mapped front buffer at 0x21000000, handle = 0x21000000 (II) intel(0): [drm] mapped back buffer at 0x20c00000, handle = 0x20c00000 (II) intel(0): [drm] mapped depth buffer at 0x20800000, handle = 0x20800000 (II) intel(0): [drm] mapped classic textures at 0x2dff5000, handle = 0x2dff5000 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Enabled (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 15, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 15, (OK) drmOpenByBusid: drmOpenMinor returns 15 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 203 (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.1, module version = 2.0.6 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "base" (**) AT Translated Set 2 keyboard: xkb_rules: "base" (**) Option "xkb_model" "evdev" (**) AT Translated Set 2 keyboard: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Found mouse buttons (II) Macintosh mouse button emulation: Configuring as mouse (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse (**) ImPS/2 Generic Wheel Mouse: always reports core events (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event4" (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes (II) ImPS/2 Generic Wheel Mouse: Found mouse buttons (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE) (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d3f5000 (pgoffset 54261) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical ) (II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x007bf000-0x0d3f4fff: DRI memory manager (209112 kB) (II) intel(0): 0x0d3f5000-0x0dff4fff: exa offscreen (12288 kB) (II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x007bf000: start of memory manager (II) intel(0): 0x00800000-0x00bfffff: depth buffer (4096 kB) X tiled (II) intel(0): 0x00c00000-0x00ffffff: back buffer (4096 kB) X tiled (II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) X tiled (II) intel(0): 0x007df000-0x007e6fff: logical 3D context (32 kB) (II) intel(0): 0x0d3f5000: end of memory manager (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): [drm] mapped front buffer at 0x21000000, handle = 0x14200000 (EE) intel(0): [drm] failure adding irq handler (II) AT Translated Set 2 keyboard: Device reopened after 10 attempts. (II) Macintosh mouse button emulation: Device reopened after 10 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 10 attempts. exaCopyDirty: Pending damage region empty! (II) I2C device ":E-EDID segment register" registered at address 0x60. (II) I2C device ":ddc2" registered at address 0xA0. Backtrace: 0: /usr/bin/X(xf86SigHandler+0x79) [0x80bc5d9] 1: [0x110400] 2: /lib/libc.so.6 [0x647178] 3: /usr/bin/X(xf86DoEEDID+0x11b) [0x80f2f6b] 4: /usr/bin/X(xf86OutputGetEDID+0x2b) [0x80e365b] 5: /usr/lib/xorg/modules/drivers//intel_drv.so [0x237c22] 6: /usr/lib/xorg/modules/drivers//intel_drv.so [0x237cbf] 7: /usr/bin/X(xf86ProbeOutputModes+0x2ae) [0x80e5b6e] 8: /usr/bin/X [0x80ecc60] 9: /usr/bin/X(RRGetInfo+0x99) [0x8165ee9] 10: /usr/bin/X(ProcRRGetScreenInfo+0x9d) [0x8169f2d] 11: /usr/bin/X [0x8163195] 12: /usr/bin/X(Dispatch+0x34f) [0x8085ecf] 13: /usr/bin/X(main+0x47d) [0x806b6cd] 14: /lib/libc.so.6(__libc_start_main+0xe5) [0x4ec6e5] 15: /usr/bin/X [0x806aab1] Fatal server error: Caught signal 11. Server aborting (II) AT Translated Set 2 keyboard: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) ImPS/2 Generic Wheel Mouse: Close (II) UnloadModule: "evdev" (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1