Attachment 19156 Details for Bug 17384 – lspci output

lspci output

lspci.txt (text/plain), 15.34 KB, created by Bryce Harrington on 2008-09-24 13:47:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bryce Harrington

Created: 2008-09-24 13:47:13 UTC

Size: 15.34 KB

patch

obsolete

>00:00.0 Host bridge [0600]: Intel Corporation Eaglelake DRAM Controller [8086:2e00] (rev 03)
>	Subsystem: Intel Corporation Eaglelake DRAM Controller [8086:2e00]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information <?>
>	Kernel driver in use: agpgart-intel
>	Kernel modules: intel-agp
>
>00:02.0 VGA compatible controller [0300]: Intel Corporation Eaglelake Integrated Graphics Controller [8086:2e02] (rev 03)
>	Subsystem: Intel Corporation Eaglelake Integrated Graphics Controller [8086:2e02]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
>	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>	Region 4: I/O ports at ec00 [size=8]
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:02.1 Display controller [0380]: Intel Corporation Eaglelake Integrated Graphics Controller [8086:2e03] (rev 03)
>	Subsystem: Intel Corporation Device [8086:2e02]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Region 0: Memory at fe600000 (64-bit, non-prefetchable) [size=1M]
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:03.0 Communication controller [0780]: Intel Corporation Eaglelake HECI Controller [8086:2e04] (rev 03)
>	Subsystem: Intel Corporation Eaglelake HECI Controller [8086:2e04]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at fe7fbc00 (64-bit, non-prefetchable) [size=16]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>00:03.2 IDE interface [0101]: Intel Corporation Eaglelake PT IDER Controller [8086:2e06] (rev 03) (prog-if 85 [Master SecO PriO])
>	Subsystem: Intel Corporation Eaglelake PT IDER Controller [8086:2e06]
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin C routed to IRQ 18
>	Region 0: I/O ports at e880 [size=8]
>	Region 1: I/O ports at e800 [size=4]
>	Region 2: I/O ports at e480 [size=8]
>	Region 3: I/O ports at e400 [size=4]
>	Region 4: I/O ports at e080 [size=16]
>	Capabilities: [c8] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
>	Subsystem: Intel Corporation Device [8086:0000]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 223
>	Region 0: Memory at fe7c0000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at fe7f9000 (32-bit, non-prefetchable) [size=4K]
>	Region 2: I/O ports at dc00 [size=32]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
>		Address: 00000000fee0f00c  Data: 4132
>	Capabilities: [e0] Vendor Specific Information <?>
>	Kernel driver in use: e1000e
>	Kernel modules: e1000e
>
>00:1a.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #4 [8086:3a67] (rev 02)
>	Subsystem: Intel Corporation ICH10 USB UHCI Controller #4 [8086:3a67]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 4: I/O ports at d880 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1a.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #5 [8086:3a68] (rev 02)
>	Subsystem: Intel Corporation ICH10 USB UHCI Controller #5 [8086:3a68]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at d800 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1a.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #6 [8086:3a69] (rev 02)
>	Subsystem: Intel Corporation ICH10 USB UHCI Controller #6 [8086:3a69]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 18
>	Region 4: I/O ports at d480 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1a.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20)
>	Subsystem: Intel Corporation ICH10 USB2 EHCI Controller #2 [8086:3a6c]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 19
>	Region 0: Memory at fe7fb800 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] Vendor Specific Information <?>
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:1b.0 Audio device [0403]: Intel Corporation ICH10 HD Audio Controller [8086:3a6e] (rev 02)
>	Subsystem: Intel Corporation ICH10 HD Audio Controller [8086:3a6e]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 22
>	Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag- RBE- FLReset+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100] Virtual Channel <?>
>	Capabilities: [130] Root Complex Link <?>
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>00:1d.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #1 [8086:3a64] (rev 02)
>	Subsystem: Intel Corporation ICH10 USB UHCI Controller #1 [8086:3a64]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 23
>	Region 4: I/O ports at d400 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #2 [8086:3a65] (rev 02)
>	Subsystem: Intel Corporation ICH10 USB UHCI Controller #2 [8086:3a65]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 19
>	Region 4: I/O ports at d080 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #3 [8086:3a66] (rev 02)
>	Subsystem: Intel Corporation ICH10 USB UHCI Controller #3 [8086:3a66]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 16
>	Region 4: I/O ports at d000 [size=32]
>	Capabilities: [50] Vendor Specific Information <?>
>	Kernel driver in use: uhci_hcd
>	Kernel modules: uhci-hcd
>
>00:1d.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20)
>	Subsystem: Intel Corporation ICH10 USB2 EHCI Controller #1 [8086:3a6a]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 23
>	Region 0: Memory at fe7fb400 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] Vendor Specific Information <?>
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01)
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge [8086:244e]
>
>00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:3a10] (rev 02)
>	Subsystem: Intel Corporation Device [8086:3a10]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information <?>
>
>00:1f.2 IDE interface [0101]: Intel Corporation ICH10 4 port SATA IDE Controller [8086:3a00] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: Intel Corporation ICH10 4 port SATA IDE Controller [8086:3a00]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 19
>	Region 0: I/O ports at cc00 [size=8]
>	Region 1: I/O ports at c880 [size=4]
>	Region 2: I/O ports at c800 [size=8]
>	Region 3: I/O ports at c480 [size=4]
>	Region 4: I/O ports at c400 [size=16]
>	Region 5: I/O ports at c080 [size=16]
>	Capabilities: [70] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [b0] Vendor Specific Information <?>
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.3 SMBus [0c05]: Intel Corporation ICH10 SMBus Controller [8086:3a60] (rev 02)
>	Subsystem: Intel Corporation ICH10 SMBus Controller [8086:3a60]
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin C routed to IRQ 7
>	Region 0: Memory at fe7fb000 (64-bit, non-prefetchable) [size=256]
>	Region 4: I/O ports at 0480 [size=32]
>	Kernel modules: i2c-i801
>
>00:1f.5 IDE interface [0101]: Intel Corporation ICH10 2 port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
>	Subsystem: Intel Corporation ICH10 2 port SATA IDE Controller [8086:3a06]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 19
>	Region 0: I/O ports at bc00 [size=8]
>	Region 1: I/O ports at b880 [size=4]
>	Region 2: I/O ports at b800 [size=8]
>	Region 3: I/O ports at b480 [size=4]
>	Region 4: I/O ports at b400 [size=16]
>	Region 5: I/O ports at b080 [size=16]
>	Capabilities: [70] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [b0] Vendor Specific Information <?>
>	Kernel driver in use: ata_piix
>	Kernel modules: ata_piix
>
>00:1f.6 Signal processing controller [1180]: Intel Corporation ICH10 Thermal Subsystem [8086:3a62] (rev 02)
>	Subsystem: Intel Corporation ICH10 Thermal Subsystem [8086:3a62]
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin C routed to IRQ 5
>	Region 0: Memory at fe7f8000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 17384: 18609 | 18610 | 18633 | 18646 | 19156 | 19177

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.