Linux version 2.6.27-rc5 (root@x-945gm) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed Sep 3 15:11:29 CST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f7d0000 (usable) BIOS-e820: 000000001f7d0000 - 000000001f7e5600 (reserved) BIOS-e820: 000000001f7e5600 - 000000001f7f8000 (ACPI NVS) BIOS-e820: 000000001f7f8000 - 000000001f800000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) last_pfn = 0x1f7d0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 1f7d0000 @ 7000-d000 RAMDISK: 1f53d000 - 1f7bf4fe DMI 2.4 present. ACPI: RSDP 000F7830, 0024 (r2 HP ) ACPI: XSDT 1F7E57CC, 0084 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP 1F7E5684, 00F4 (r4 HP 30D5 3 HP 1) ACPI: DSDT 1F7E5AD8, EC13 (r1 HP hp 520 10000 MSFT 100000E) ACPI: FACS 1F7F7E80, 0040 ACPI: SLIC 1F7E5850, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: HPET 1F7E59C8, 0038 (r1 HP 30D5 1 HP 1) ACPI: APIC 1F7E5A00, 0068 (r1 HP 30D5 1 HP 1) ACPI: MCFG 1F7E5A68, 003C (r1 HP 30D5 1 HP 1) ACPI: TCPA 1F7E5AA4, 0032 (r2 HP 30D5 1 HP 1) ACPI: SSDT 1F7F46EB, 0059 (r1 HP HPQNLP 1 MSFT 100000E) ACPI: SSDT 1F7F4744, 032A (r1 HP HPQPAT 1 MSFT 100000E) ACPI: SSDT 1F7F4A6E, 01FB (r1 HP Cpu0Ist 3000 INTL 20060317) ACPI: SSDT 1F7F4C69, 04CB (r1 HP Cpu0Cst 3001 INTL 20060317) ACPI: SSDT 1F7F5134, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) ACPI: SSDT 1F7F5393, 04D7 (r1 HP CpuPm 3000 INTL 20060317) ACPI: DMI detected: Hewlett-Packard 503MB LOWMEM available. mapped low ram: 0 - 1f7d0000 low ram: 00000000 - 1f7d0000 bootmap 00002000 - 00005efc (9 early reservations) ==> bootmem [0000000000 - 001f7d0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000643150] TEXT DATA BSS ==> [0000100000 - 0000643150] #4 [001f53d000 - 001f7bf4fe] RAMDISK ==> [001f53d000 - 001f7bf4fe] #5 [0000644000 - 0000647000] INIT_PG_TABLE ==> [0000644000 - 0000647000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001f7d0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001f7d0 On node 0 totalpages: 128879 free_area_init_node: node 0, pgdat c053f5e0, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 123904 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 1f800000:df400000) PERCPU: Allocating 36572 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127871 Kernel command line: ro root=LABEL=/12345 resume=/dev/hda2 rhgb quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Detected 1662.492 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 502460k/515904k available (3004k kernel code, 12772k reserved, 1645k data, 260k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB) vmalloc : 0xe0000000 - 0xfffb7000 ( 511 MB) lowmem : 0xc0000000 - 0xdf7d0000 ( 503 MB) .init : 0xc0594000 - 0xc05d5000 ( 260 kB) .data : 0xc03ef3b5 - 0xc058a820 (1645 kB) .text : 0xc0100000 - 0xc03ef3b5 (3004 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.98 BogoMIPS (lpj=6649968) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 Parsing all Control Methods: Table [DSDT](id 0001) - 1048 Objects with 72 Devices 332 Methods 36 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 17 Objects with 4 Devices 6 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 6 Objects with 0 Devices 4 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 1 Objects with 0 Devices 1 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 7 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0007) - 14 Objects with 0 Devices 5 Methods 0 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Genuine Intel(R) CPU T1300 @ 1.66GHz stepping 08 Brought up 1 CPUs Total of 1 processors activated (3324.98 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 net_namespace: 448 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16 PCI: Using configuration type 1 for base access evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode Completing Region/Field/Buffer/Package initialization:.......................................................................................................................................................... Initialized 31/36 Regions 0/0 Fields 62/63 Buffers 61/62 Packages (1104 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:....... Executed 7 _INI methods requiring 2 _STA executions (examined 85 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 10 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [C002] (0000:00) pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:10:00.0: PME# supported from D0 D3hot D3cold pci 0000:10:00.0: PME# disabled PCI: bridge 0000:00:1c.1 32bit mmio: [f0000000, f00fffff] pci 0000:02:06.0: supports D1 pci 0000:02:06.0: supports D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:02:08.0: supports D1 pci 0000:02:08.0: supports D2 pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:08.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [2000, 2fff] PCI: bridge 0000:00:1e.0 32bit mmio: [f0100000, f03fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C100._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C110._PRT] ACPI: PCI Interrupt Link [C10C] (IRQs *10 11) ACPI: PCI Interrupt Link [C10D] (IRQs *10 11) ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11) ACPI: PCI Interrupt Link [C10F] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C11C] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C11D] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C11E] (IRQs 10 11) *0, disabled. ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080609] ACPI: Power Resource [C1FE] (on) ACPI: Power Resource [C206] (on) ACPI: Power Resource [C2FA] (off) ACPI: Power Resource [C2FB] (off) ACPI: Power Resource [C2FC] (off) ACPI: Power Resource [C2FD] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x1f7fffff could not be reserved system 00:09: ioport range 0x500-0x57f has been reserved system 00:09: ioport range 0x800-0x80f has been reserved system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x1000-0x107f has been reserved system 00:0a: ioport range 0x1100-0x113f has been reserved system 00:0a: ioport range 0x1200-0x121f has been reserved system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved system 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0a: iomem range 0xfed90000-0xfed9afff could not be reserved system 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved pci 0000:02:06.0: BAR 9 too large: 0x00000000000000-0x00000003ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf0000000-0xf00fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:06.0: IO window: 0x002400-0x0024ff pci 0000:02:06.0: IO window: 0x002800-0x0028ff pci 0000:02:06.0: MEM window: 0x20000000-0x23ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xf0100000-0xf03fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 08 index 0 mmio: [0, 0] bus: 08 index 1 mmio: [0, 0] bus: 08 index 2 mmio: [0, 0] bus: 08 index 3 mmio: [0, 0] bus: 10 index 0 mmio: [0, 0] bus: 10 index 1 mmio: [f0000000, f00fffff] bus: 10 index 2 mmio: [0, 0] bus: 10 index 3 mmio: [0, 0] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [f0100000, f03fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffffffffffff] bus: 03 index 0 io port: [2400, 24ff] bus: 03 index 1 io port: [2800, 28ff] bus: 03 index 2 mmio: [0, 3ffffff] bus: 03 index 3 mmio: [20000000, 23ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 2569k freed HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 986 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ACPI: AC Adapter [C1AB] (on-line) ACPI: Battery Slot [C1AC] (battery absent) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [C217] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [C218] ACPI: Transitioning device [C2FE] to D3 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [C2FE] (off) ACPI: Transitioning device [C2FF] to D3 fan PNP0C0B:01: registered as cooling_device1 ACPI: Fan [C2FF] (off) ACPI: Transitioning device [C300] to D3 fan PNP0C0B:02: registered as cooling_device2 ACPI: Fan [C300] (off) ACPI: Transitioning device [C301] to D3 fan PNP0C0B:03: registered as cooling_device3 ACPI: Fan [C301] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI0007:00: registered as cooling_device4 ACPI: Processor [CPU0] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ0] (31 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ1] (44 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ2] (37 C) thermal LNXTHERM:04: registered as thermal_zone3 ACPI: Thermal Zone [TZ3] (20 C) thermal LNXTHERM:05: registered as thermal_zone4 ACPI: Thermal Zone [TZ4] (0 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy intel_rng: FWH not detected Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver4 ports, IRQ sharing disabled Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found brd: module loaded loop: module loaded airo(): Probing for PCI adapters airo(): Finished probing for PCI adapters console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... hda: ST98823AS, ATA DISK drive Probing IDE interface ide1... hdc: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: BAR 0: can't reserve I/O region [0x1f0-0x1f7] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) ata_piix 0000:00:1f.2: BAR 2: can't reserve I/O region [0x170-0x177] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) ata_piix 0000:00:1f.2: no available native port Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0584000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:C1FB,PNP0f13:C1FC] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI No-Shortcut mode PM: Resume from partition /dev/hda2 PM: Checking hibernation image. Marking TSC unstable due to TSC halts in idle PM: Resume from disk failed. Freeing unused kernel memory: 260k freed input: AT Translated Set 2 keyboard as /class/input/input3 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input4 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2008 Intel Corporation iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:10:00.0: setting latency timer to 64 iwl3945: Detected Intel Wireless WiFi Link 3945ABG e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels phy0: Selected rate control algorithm 'iwl-3945-rs' iwl3945 0000:10:00.0: PCI INT A disabled e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e100: 0000:02:08.0: e100_probe: Error clearing wake event e100: eth0: e100_probe: addr 0xf0101000, irq 20, MAC addr 00:16:d4:b8:c7:a7 Non-volatile memory driver v1.2 EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 923728k swap on /dev/hda2. Priority:-1 extents:1 across:923728k warning: process `kudzu' used the deprecated sysctl system call with 1.23. ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) firmware: requesting iwlwifi-3945-1.ucode iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2 iwl3945: Could not read microcode: -2 iwl3945 0000:10:00.0: PCI INT A disabled iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) firmware: requesting iwlwifi-3945-1.ucode iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2 iwl3945: Could not read microcode: -2 iwl3945 0000:10:00.0: PCI INT A disabled iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) firmware: requesting iwlwifi-3945-1.ucode iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2 iwl3945: Could not read microcode: -2 iwl3945 0000:10:00.0: PCI INT A disabled iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwl3945 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) firmware: requesting iwlwifi-3945-1.ucode iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2 iwl3945: Could not read microcode: -2 iwl3945 0000:10:00.0: PCI INT A disabled eth0: no IPv6 routers present warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5 [drm:i915_getparam] *ERROR* Unknown parameter 5