This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.5.99.1 Release Date: (unreleased) X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.27-rc4-gem i686 Current Operating System: Linux Delline 2.6.27-rc4-gem #9 SMP Tue Sep 16 11:02:59 CEST 2008 i686 Build Date: 16 September 2008 03:02:33PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/opt/gfx-test/var/log/Xorg.0.log", Time: Tue Sep 16 16:06:03 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (**) |-->Input Device "Synaptics Touchpad" (**) |-->Input Device "Generic Keyboard" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (==) FontPath set to: built-ins (==) ModulePath set to "/opt/gfx-test/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x1ee0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 9 (--) PCI:*(0@0:2:0) Intel Corporation Mobile Integrated Graphics Controller rev 12, Mem @ 0xfea00000/0, 0xe0000000/0, I/O @ 0x0000eff8/0 (--) PCI: (0@0:2:1) Intel Corporation Mobile Integrated Graphics Controller rev 12, Mem @ 0xfeb00000/0 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /opt/gfx-test/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /opt/gfx-test/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /opt/gfx-test/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /opt/gfx-test/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /opt/gfx-test/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /opt/gfx-test/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 2.5.96 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "synaptics" (II) Loading /opt/gfx-test/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 0.15.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "kbd" (II) Loading /opt/gfx-test/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile IntelĀ® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /opt/gfx-test/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /opt/gfx-test/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (==) intel(0): Depth 24, (==) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xFEA00000 (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): found backlight control method /sys/class/backlight/acpi_video1 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AE.00, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0. (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TMDS-1 connected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output LVDS using initial mode 1024x768 (II) intel(0): Output TMDS-1 using initial mode 1024x768 (II) intel(0): Monitoring connected displays enabled (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Intel XvMC decoder disabled (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /opt/gfx-test/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /opt/gfx-test/lib/xorg/modules//libint10.so (II) intel(0): initializing int10 (WW) intel(0): Bad V_BIOS checksum (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 3.0 (II) intel(0): VESA VBE Total Mem: 7616 kB (II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 1.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /opt/gfx-test/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /opt/gfx-test/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.99.1, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000206 to 0x00000206 (WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS (WW) intel(0): PIPEBSTAT after: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 488960 total, 1 used (II) intel(0): I830CheckAvailableMemory: 1955836 kB available drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xfea00000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 44236800 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0afcf000 (pgoffset 45007) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0d9ff000 (pgoffset 55807) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f800000 physical ) (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007fe00000 physical ) (II) intel(0): 0x00601000-0x00601fff: power context (4 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0077f000-0x0afcefff: DRI memory manager (172352 kB) (II) intel(0): 0x0afcf000-0x0d9fefff: exa offscreen (43200 kB) (II) intel(0): 0x0d9ff000-0x0f9fefff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x0077f000: start of memory manager (II) intel(0): 0x0079f000-0x015aefff: depth buffer (14400 kB) Y tiled (II) intel(0): 0x0179f000-0x025aefff: back buffer (14400 kB) X tiled (II) intel(0): 0x02800000-0x0360ffff: front buffer (14400 kB) X tiled (II) intel(0): 0x0279f000-0x0279ffff: overlay registers (4 kB) (II) intel(0): 0x027a0000-0x027b1fff: exa G965 state buffer (72 kB) (II) intel(0): 0x027c0000-0x027c7fff: logical 3D context (32 kB) (II) intel(0): 0x027c8000-0x027d1fff: HW cursors (40 kB) (II) intel(0): 0x0afcf000: end of memory manager (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00040000, overlay tiling (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 96 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe A (II) intel(0): [drm] mapped front buffer at 0xe2800000, handle = 0xe2800000 (II) intel(0): [drm] mapped back buffer at 0xe179f000, handle = 0xe179f000 (II) intel(0): [drm] mapped depth buffer at 0xe079f000, handle = 0xe079f000 (II) intel(0): [drm] mapped classic textures at 0xed9ff000, handle = 0xed9ff000 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: drmOpenMinor returns 12 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /opt/gfx-test/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 287 x 180 (II) Synaptics touchpad driver version 0.15.0 (--) Synaptics Touchpad auto-dev sets device to /dev/input/event11 (II) Synaptics Touchpad: x-axis range 1472 - 5472 (II) Synaptics Touchpad: y-axis range 1408 - 4448 (**) Option "Device" "/dev/input/event11" (**) Option "HorizEdgeScroll" "0" (--) Synaptics Touchpad touchpad found (**) Option "SendCoreEvents" "true" (**) Synaptics Touchpad: always reports core events (**) Generic Keyboard: always reports core events (**) Option "Protocol" "standard" (**) Generic Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Generic Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Generic Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "de" (**) Generic Keyboard: XkbLayout: "de" (**) Option "CustomKeycodes" "off" (**) Generic Keyboard: CustomKeycodes disabled (II) evaluating device (Synaptics Touchpad) (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE) (II) evaluating device (Generic Keyboard) (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) (EE) XKB: Couldn't open rules file /opt/gfx-test/share/X11/xkb/rules/base (EE) XKB: No components provided for device Virtual core keyboard (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap (**) Synaptics Touchpad: (accel) keeping acceleration scheme 1 (**) Synaptics Touchpad: (accel) filter chain progression: 2.00 (**) Synaptics Touchpad: (accel) filter stage 0: 20.00 ms (**) Synaptics Touchpad: (accel) set acceleration profile 0 (EE) XKB: Couldn't open rules file /opt/gfx-test/share/X11/xkb/rules/xorg (EE) XKB: No components provided for device Generic Keyboard (WW) Couldn't load XKB keymap, falling back to pre-XKB keymap (--) Synaptics Touchpad touchpad found (EE) intel(0): underrun on pipe A! (EE) intel(0): underrun on pipe B! (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 72.10 1280 1296 1344 1448 800 802 804 830 -hsync -vsync (49.8 kHz) (II) intel(0): EDID vendor "LCD", prod id 8966 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 72.10 1280 1296 1344 1448 800 802 804 830 -hsync -vsync (49.8 kHz) (II) intel(0): EDID vendor "LCD", prod id 8966 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 72.10 1280 1296 1344 1448 800 802 804 830 -hsync -vsync (49.8 kHz) (II) intel(0): EDID vendor "LCD", prod id 8966 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 72.10 1280 1296 1344 1448 800 802 804 830 -hsync -vsync (49.8 kHz) (II) intel(0): EDID vendor "LCD", prod id 8966 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): EDID vendor "LCD", prod id 8966 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz) (II) intel(0): Modeline "1600x1000"x60.0 133.14 1600 1704 1872 2144 1000 1001 1004 1035 -hsync +vsync (62.1 kHz) (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): EDID vendor "LCD", prod id 8966 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz) (II) intel(0): Modeline "1600x1000"x60.0 133.14 1600 1704 1872 2144 1000 1001 1004 1035 -hsync +vsync (62.1 kHz) (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): EDID vendor "HWP", prod id 9935 exaCopyDirty: Pending damage region empty! (II) intel(0): EDID vendor "LCD", prod id 8966 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz) (II) intel(0): Modeline "1600x1000"x60.0 133.14 1600 1704 1872 2144 1000 1001 1004 1035 -hsync +vsync (62.1 kHz) (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): EDID vendor "LCD", prod id 8966 (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70. (II) intel(0): EDID vendor "HWP", prod id 9935 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz) (II) intel(0): Modeline "1600x1000"x60.0 133.14 1600 1704 1872 2144 1000 1001 1004 1035 -hsync +vsync (62.1 kHz) (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): EDID vendor "HWP", prod id 9935