Attachment 15385 Details for Bug 15168 – dmesg output

dmesg output

dmesg (text/plain), 20.46 KB, created by Maximilian Engelhardt on 2008-03-22 06:23:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Maximilian Engelhardt

Created: 2008-03-22 06:23:47 UTC

Size: 20.46 KB

patch

obsolete

>Linux version 2.6.25-rc6-git4 (root@koala) (gcc version 4.2.3 (Debian 4.2.3-2)) #1 PREEMPT Thu Mar 20 19:38:26 CET 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000004dee0000 (usable)
> BIOS-e820: 000000004dee0000 - 000000004deec000 (ACPI data)
> BIOS-e820: 000000004deec000 - 000000004df00000 (ACPI NVS)
> BIOS-e820: 000000004df00000 - 0000000050000000 (reserved)
> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>350MB HIGHMEM available.
>896MB LOWMEM available.
>Entering add_active_range(0, 0, 319200) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   319200
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   319200
>On node 0 totalpages: 319200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 701 pages used for memmap
>  HighMem zone: 89123 pages, LIFO batch:15
>  Movable zone: 0 pages used for memmap
>DMI present.
>ACPI: RSDP 000F6050, 0014 (r0 ACER  )
>ACPI: RSDT 4DEE5A39, 0030 (r1 ACER   Wagtail  20020114  LTP        0)
>ACPI: FACP 4DEEBF2C, 0074 (r1 ACER   Wagtail  20020114 PTL        50)
>ACPI: DSDT 4DEE5A69, 64C3 (r1 ACER   Wagtail  20020114 MSFT  100000E)
>ACPI: FACS 4DEFCFC0, 0040
>ACPI: HPET 4DEEBFA0, 0038 (r1 ACER   Wagtail  20020114 PTL         0)
>ACPI: BOOT 4DEEBFD8, 0028 (r1 ACER   Wagtail  20020114  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
>Allocating PCI resources starting at 60000000 (gap: 50000000:aec10000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
>PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 316707
>Kernel command line: root=/dev/sda1 ro vga=0x31b resume=/dev/sda2 mac80211.ieee80211_regdom=64
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Preemptible RCU implementation.
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1395.513 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1259380k/1276800k available (3639k kernel code, 16624k reserved, 1440k data, 232k init, 359296k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfffe9000 - 0xfffff000   (  88 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc05fa000 - 0xc0634000   ( 232 kB)
>      .data : 0xc048dfd6 - 0xc05f6138   (1440 kB)
>      .text : 0xc0100000 - 0xc048dfd6   (3639 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2792.74 BogoMIPS (lpj=5585481)
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
>Checking 'hlt' instruction... OK.
>Freeing SMP alternatives: 0k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0c00)
>net_namespace: 536 bytes
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd742, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Device [SECN] status [00000008]: functional but not present; setting present
>ACPI: Device [BAY1] status [00000008]: functional but not present; setting present
>ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Time: tsc clocksource has been installed.
>system 00:04: ioport range 0x600-0x60f has been reserved
>system 00:04: ioport range 0x700-0x70f has been reserved
>system 00:04: ioport range 0x800-0x80f has been reserved
>system 00:04: ioport range 0x1000-0x107f has been reserved
>system 00:04: ioport range 0x1180-0x11bf has been reserved
>system 00:04: ioport range 0x1c0-0x1cf has been reserved
>system 00:04: ioport range 0xfe00-0xfe00 has been reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:04: ioport range 0x610-0x61f has been reserved
>system 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved
>system 00:04: iomem range 0xff800000-0xffbfffff could not be reserved
>system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:04: iomem range 0x0-0x9ffff could not be reserved
>system 00:04: iomem range 0xe0000-0xfffff could not be reserved
>system 00:04: iomem range 0x0-0x0 could not be reserved
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 0x00003000-0x000030ff
>  IO window: 0x00003400-0x000034ff
>  PREFETCH window: 0x64000000-0x67ffffff
>  MEM window: 0x68000000-0x6bffffff
>PCI: Bus 7, cardbus bridge: 0000:02:06.1
>  IO window: 0x00003800-0x000038ff
>  IO window: 0x00003c00-0x00003cff
>  PREFETCH window: 0x6c000000-0x6fffffff
>  MEM window: 0x70000000-0x73ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: 0xe0200000-0xe07fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x37 set to 0x1
>Machine check exception polling timer started.
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>highmem bounce pool size: 64 pages
>NTFS driver 2.1.29 [Flags: R/W].
>fuse init (API version 7.9)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 10240k, total 32576k
>vesafb: mode is 1280x1024x32, linelength=5120, pages=5
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Transitioning device [FAN0] to D3
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN0] (off)
>ACPI: Transitioning device [FAN1] to D3
>ACPI: PNP0C0B:01 is registered as cooling_device1
>ACPI: Fan [FAN1] (off)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/input/input3
>ACPI: Video Device [AGP] (multi-head: yes  rom: yes  post: no)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device2
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (50 C)
>lp: driver loaded but no devices found
>Real Time Clock Driver v1.12ac
>intel_rng: FWH not detected
>ppdev: user-space parallel port driver
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 855GM Chipset.
>agpgart: Detected 32636K stolen memory.
>agpgart: AGP aperture is 128M @ 0xe8000000
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>loop: module loaded
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>Switched to high resolution mode on CPU 0
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:29:99:a7
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata1.00: ATA-6: TOSHIBA MK8026GAX, PA001G, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[e020a000-e020a7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ieee1394: raw1394: /dev/raw1394 device initialized
>eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
>Yenta: CardBus bridge found at 0000:02:06.0 [1025:0035]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0038, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff
>Yenta: CardBus bridge found at 0000:02:06.1 [1025:0035]
>Yenta: ISA IRQ mask 0x0038, PCI irq 10
>Socket status: 30000410
>Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff
>usbmon: debugfs is not available
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00000d5d2d]
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>pccard: PCMCIA card inserted into slot 1
>cs: memory probe 0xe0200000-0xe07fffff: excluding 0xe0200000-0xe025ffff<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>
>pcmcia: registering new device pcmcia1.0
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>hub 4-2:1.0: USB hub found
>hub 4-2:1.0: 3 ports detected
>usb 4-2.3: new full speed USB device using uhci_hcd and address 3
>usb 4-2.3: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to: TSC halts in idle.
>Time: acpi_pm clocksource has been installed.
>input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
>input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 55886 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>ALSA device list:
>  #0: Intel 82801DB-ICH4 with ALC202 at irq 10
>  #1: Intel 82801DB-ICH4 Modem at irq 10
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ctnetlink v0.93: registering with nfnetlink.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ClusterIP Version 0.8 loaded successfully
>arp_tables: (C) 2002 David S. Miller
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Using IPI Shortcut mode
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>Clocksource tsc unstable (delta = -72236137 ns)
>scsi 2:0:0:0: Direct-Access     Generic  Flash R/W        2002 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda1: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 720940
>ext3_orphan_cleanup: deleting unreferenced inode 720941
>ext3_orphan_cleanup: deleting unreferenced inode 720939
>ext3_orphan_cleanup: deleting unreferenced inode 720936
>ext3_orphan_cleanup: deleting unreferenced inode 720934
>ext3_orphan_cleanup: deleting unreferenced inode 720929
>ext3_orphan_cleanup: deleting unreferenced inode 720913
>EXT3-fs: sda1: 7 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Freeing unused kernel memory: 232k freed
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>p54: LM86 firmware
>p54: FW rev 2.7.0.0 - Softmac protocol 4.1
>phy0: Selected rate control algorithm 'pid'
>phy0: hwaddr 00:60:b3:91:45:5b, isl3890
>udev: renamed network interface wlan0 to eth1
>Adding 2001880k swap on /dev/sda2.  Priority:-1 extents:1 across:2001880k
>EXT3 FS on sda1, internal journal
>input: Acer hotkey driver as /devices/virtual/input/input8
>Acer Travelmate hotkey driver v0.5.35
>atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)

Actions: View

Attachments on bug 15168: 15384 | 15385 | 15386 | 15387 | 15458 | 15688 | 15704 | 15705 | 16458 | 16459 | 16460 | 16480 | 16495 | 17402 | 17437 | 17565

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.