Attachment 14144 Details for Bug 14065 – xorg.conf from John Dorfman 02/04/07

xorg.conf from John Dorfman 02/04/07

xorg.conf (text/plain), 8.45 KB, created by John Dorfman on 2008-02-04 19:20:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: John Dorfman

Created: 2008-02-04 19:20:29 UTC

Size: 8.45 KB

patch

obsolete

>Section "ServerLayout"
>	Identifier     "X.org Configured"
>	Screen      0  "Screen0" 0 0
>	InputDevice    "Mouse[2]"
>	InputDevice    "Vaio keys" "AlwaysCore"
>	InputDevice    "Synaptics Mouse" "CorePointer"
>	InputDevice    "Keyboard0" "CoreKeyboard"
>	Option  "BlankTime"  "5"  # Blank the screen after 5 minutes (Fake)
>	Option  "StandbyTime"  "10"  # Turn off screen after 10 minutes (DPMS)
>	Option  "SuspendTime"  "20"  # Full suspend after 20 minutes
>	Option  "OffTime"  "30"  # Turn off after half an hour
>EndSection
>
>Section "Files"
>	FontPath     "/usr/share/fonts/misc/"
>	FontPath     "/usr/share/fonts/TTF/"
>	FontPath     "/usr/share/fonts/Speedo/"
>	FontPath     "/usr/share/fonts/Type1/"
>	FontPath     "/usr/share/fonts/CID/"
>	FontPath     "/usr/share/fonts/75dpi/"
>	FontPath     "/usr/share/fonts/100dpi/"
>EndSection
>
>Section "Module"
>	Load  "extmod"
>	Load  "dbe"
>	Load  "dri"
>	Load  "glx"
>	Load  "freetype"
>	Load  "type1"
>	Load  "synaptics"	#for touchpad
>EndSection
>
>Section "InputDevice"
>	Identifier  "Keyboard0"
>	Driver      "keyboard"
>EndSection
>
>Section "InputDevice"
>	Identifier  "Mouse0"
>	Driver      "mouse"
>	Option	    "Protocol" "auto"
>	Option	    "Device" "/dev/mouse"
>	Option      "Emulate3Buttons"		"true"
>	Option      "ZAxisMapping"		"4 5"
>EndSection
>
>Section "InputDevice"
>        Identifier  "Vaio keys"
>        Driver      "evdev"
>        Option      "Name" "Sony Vaio Keys"
>        Option      "XkbLayout" "jp"
>        Option      "XkbModel" "jp106"
>EndSection
>
># Touchpad configuration.
># Obtain the Synaptics X driver, from http://web.telia.com/~u89404340/touchpad/
># For tweaking parameters, install the "synclient" utility from that package.
># This is set up for version 0.14.0, and for an Alps Glidepoint pad, which
># has different scale factors and timings from the Synaptics pad.  SuSE 9.2
># comes with version 0.13.x.
>Section "InputDevice"
>  Driver	"synaptics"
>    Identifier	"Synaptics Mouse"
>	Option	"InputFashion" "Mouse"
>	Option	"Name" "AlpsPS/2 ALPS TouchPad"
>	Option	"Vendor" "Sysp"
>	#  Option	"Protocol" "auto-dev"
>	#  Option	"Protocol" "event"
>	#  Option	"Device" "/dev/input/event1"
>	Option	"Protocol" "imps/2"
>	Option	"Device" "/dev/input/mice"
>        Option	"Buttons" "8"
>	Option	"ZAxisMapping"		"4 5 6 7"
>	# Allows synclient to configure the driver in real time.
>	Option	"SHMConfig"		"on"
>	# Corners of Alps Glidepoint touchpad: 
>	# Outer			(52,46-995,728)	Observed bounding box
>	# Probably really	(0,0-1000,750)	Bezel covers some active area
>	# Inner			(100,100-950,670) Outside this is a corner tap
>	Option	"TopEdge"		"100"
>	Option	"BottomEdge"		"670"
>	Option	"LeftEdge"		"100"
>	Option	"RightEdge"		"950"
>						
>	# "Speeds" are in screen pixels per pad unit.  Ratio scales with finger
>	# speed: MinSpeed if slow, MaxSpeed if fast.  With driver 0.13.5,
>	# units were different and 0.65, 0.15 were my preferred values.
>	Option	"MaxSpeed"		"2.0"
>	Option	"MinSpeed"		"0.5"
>	# dS = change in screen pixels; dP = change in pad units per "packet"; 
>	# A = AccelFactor.  Then dS = A * dP * dP but limited by 
>	# {Min,Max}Speed * dP.  Packets come out a time dT apart, where we can 
>	# only guess what dT is.  Empirically, A = 0.05 gives a speed of about 
>	# 1.0, i.e. 1 pixel per pad unit, if you cross the pad in 1 second.
>	Option	"AccelFactor"		"0.05"
>	# X or Y pad motion for each scroll event (simulated button)
>	Option	"VertScrollDelta"	"25"
>	Option	"HorizScrollDelta"	"25"
>	# If scroll speed (events/sec) is above this value for 4 successive
>	# packets, scrolling continues until you tap.  0 -> disable.
>	Option	"CoastingSpeed"		"3.0"
>				  
>	# Edge motion speed scales with Z axis (pressure).  However, the
>	# Alps pad poorly gives Z (compared to Synaptics), so this scaling
>	# is not used.  Speed may be screen pixels/sec.
>	Option	"EdgeMotionMinZ"	"65"
>	Option	"EdgeMotionMaxZ"	"80"
>	Option	"EdgeMotionMinSpeed"	"150"
>	Option	"EdgeMotionMaxSpeed"	"150"
>	# True -> use for normal movement, false -> only for dragging.
>	Option	"EdgeMotionUseAlways"	"on"
>		  
>	# What happens when you tap the {Left,Right}{Top,Bottom} corner or
>	# tap inside with N fingers.  0 -> nothing, 1 = left button, 
>	# 2 = middle button, 3 = right button.  The Alps pad cannot distinguish
>	# multiple fingers.
>	Option	"LBCornerButton"	"2"
>	Option	"LTCornerButton"	"0"
>	Option	"RBCornerButton"	"3"
>	Option	"RTCornerButton"	"0"
>	Option	"TapButton1"		"1"
>	Option	"TapButton2"		"3"
>	Option	"TapButton3"		"0"
>
>     	# If Z axis is above FingerHigh -> touch.  Below FingerLow -> release.
>	# Unlike the Synaptics pad, on a tap the Alps pad sends one single
>	# packet (hardware detection) with Z=16 followed 100 msec later by one 
>	# in the exact same place with Z=0.  (Never < 90 msec, always < 110
>	# msec.)  (There's a kernel patch to kludge around this.)
>	Option	"FingerHigh"		"15"
>	Option	"FingerLow"		"12"
>    	# (Note: defaults for the next 3 come out to 220 180 180 for Synaptics)
>	# In order for a tap to be recognized:
>	# Touch and release must be no more distant than this (pad units)
>	Option	"MaxTapMove"		"200"
>  	# Release must follow touch no longer than this (msec)
>	# NOTE! Change to 210 with Alps hardware tap patch mentioned above.
>	# jimc uses 110 without the patch.
>	Option	"MaxTapTime"		"210"
> 	# Second tap must follow release this closely to recognize double tap.
>	Option	"MaxDoubleTapTime"	"150"
>	# How long between emulated button-down and button-up events.  Should
>	# be long enough so you can see the button change color.
>	Option	"ClickTime"		"100"
>	# If physical buttons 1 and 3 are hit within this time, do button 2.
>	Option	"EmulateMidButtonTime"	"150"
>
>	# 0 = enable, 1 = disable completely, 2 = only tapping is disabled
>	Option	"TouchpadOff"		"0"
>	# On -> drag continues until you tap a second time.
>	Option	"LockedDrags"		"off"
>	# These features are not turned on.
>	Option	"GuestMouseOff"		"off"
>	Option	"CircularScrolling"	"off"
>	# Angle in radians for each scroll event
>	Option	"CircScrollDelta"	"0.2"
>	# Where do you touch to start circular scroll?  0 -> any edge, 1 = top 
>	# edge, 2 = top right corner, etc. around the edge of the pad up to
>	# 8 = top left corner.
>	Option	"CircScrollTrigger"	"0"
>	Option	"PalmDetect"		"off"
>	
>EndSection
>
># External USB or PS/2 mouse, or wireless Karaoke controller used as mouse.
>Section "InputDevice"
>	Driver       "mouse"
>	Identifier   "Mouse[2]"
>	Option       "Buttons" "7"
>	Option       "Device" "/dev/input/mice"
>	Option       "InputFashion" "Mouse"
>	Option       "Name" "USB-Mouse;ExplorerPS/2 on USB"
>	Option       "Protocol" "ExplorerPS/2"
>	Option       "ZAxisMapping" "4 5"
>EndSection
>
>Section "Monitor"
>	Identifier   "Monitor0"
>	Option  "DPMS"  "true"
>	HorizSync    28-49
>	VertRefresh  43-72
>	VendorName   "Monitor Vendor"
>	ModelName    "Monitor Model"
>EndSection
>
>Section "Device"
>        ### Available Driver options are:-
>        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>        ### [arg]: arg optional
>        #Option     "NoAccel"            	# [<bool>]
>        #Option     "SWcursor"           	# [<bool>]
>        #Option     "ColorKey"           	# <i>
>        #Option     "CacheLines"         	# <i>
>        #Option     "Dac6Bit"            	# [<bool>]
>        #Option     "DRI"                	# [<bool>]
>        #Option     "NoDDC"              	# [<bool>]
>        #Option     "ShowCache"          	# [<bool>]
>        #Option     "XvMCSurfaces"       	# <i>
>        #Option     "PageFlip"           	# [<bool>]
>	Identifier  "Card0"
>	#Driver      "i810"
>	Driver      "intel"
>	#VideoRam    65536
>	VendorName  "Intel Corp."
>	BoardName   "82830 CGC [Chipset Graphics Controller]"
>	BusID       "PCI:0:2:0"
>	Option      "ModeDebug" 		"YES"
>	#Option      "UseFBDev"			"true"
>	#Option      "UseFastTLS"		"1"
>EndSection
>
>Section "Screen"
>	Identifier "Screen0"
>	Device     "Card0"
>	Monitor    "Monitor0"
>	DefaultDepth	16
>	SubSection "Display"
>		Viewport   0 0
>		Depth     1
>		Modes "1024x768" "800x600" "640x480"
>	EndSubSection
>	SubSection "Display"
>		Viewport   0 0
>		Depth     4
>		Modes "1024x768" "800x600" "640x480"
>	EndSubSection
>	SubSection "Display"
>		Viewport   0 0
>		Depth     8
>		Modes "1024x768" "800x600" "640x480"
>	EndSubSection
>	SubSection "Display"
>		Viewport   0 0
>		Depth     15
>		Modes "1024x768" "800x600" "640x480"
>	EndSubSection
>	SubSection "Display"
>		Viewport   0 0
>		Depth     16
>		Modes "1024x768" "800x600" "640x480"
>	EndSubSection
>	SubSection "Display"
>		Viewport   0 0
>		Depth     24
>		Modes "1024x768" "800x600" "640x480"
>	EndSubSection
>EndSection
>
>Section "DRI"
>	Mode	0666
>EndSection
>
>Section "Extensions"
>        Option "Composite" "Enable"
>EndSection

Actions: View

Attachments on bug 14065: 14144 | 14145 | 14146 | 14147 | 14148 | 14303 | 14370 | 14371 | 14606 | 14607

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.