[ 0.000000] Linux version 4.16.13 (root@surfplank2.hierzo) (gcc version 8.1.1 20180502 (Red Hat 8.1.1-1) (GCC)) #3 SMP PREEMPT Wed May 30 15:14:11 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.13 ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1 cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0 mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1 rd.auto=1 audit=0 systemd.log_level=warning ip=192.168.10.70::192.168.10.98:255.255.255.0:::off:192.168.10.98 rd.neednet=1 net.ifnames=0 initrd=/initramfs-4.16.13.img [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000db678fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db679000-0x00000000db79ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db7a0000-0x00000000db8cafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db8cb000-0x00000000dbc9cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbc9d000-0x00000000dceb4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dceb5000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000003df000000-0x000000041effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.1.1 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X470 AORUS ULTRA GAMING/X470 AORUS ULTRA GAMING-CF, BIOS F2 03/14/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3df000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000420000000 aka 16896M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x3473eb000, 0x3473ebfff] PGTABLE [ 0.000000] BRK [0x3473ec000, 0x3473ecfff] PGTABLE [ 0.000000] BRK [0x3473ed000, 0x3473edfff] PGTABLE [ 0.000000] BRK [0x3473ee000, 0x3473eefff] PGTABLE [ 0.000000] BRK [0x3473ef000, 0x3473effff] PGTABLE [ 0.000000] BRK [0x3473f0000, 0x3473f0fff] PGTABLE [ 0.000000] BRK [0x3473f1000, 0x3473f1fff] PGTABLE [ 0.000000] BRK [0x3473f2000, 0x3473f2fff] PGTABLE [ 0.000000] BRK [0x3473f3000, 0x3473f3fff] PGTABLE [ 0.000000] BRK [0x3473f4000, 0x3473f4fff] PGTABLE [ 0.000000] BRK [0x3473f5000, 0x3473f5fff] PGTABLE [ 0.000000] BRK [0x3473f6000, 0x3473f6fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7ea5e000-0x7fffffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DB8CB098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DB8D1A10 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000DB8CB1E8 006822 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DBC86E00 000040 [ 0.000000] ACPI: APIC 0x00000000DB8D1B28 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DB8D1C08 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DB8D1C50 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DB8D1CF0 005367 (v02 AMD AmdTable 00000002 MSFT 02000002) [ 0.000000] ACPI: SSDT 0x00000000DB8D7058 00119C (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000DB8D81F8 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000DB8D8A08 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DB8D8A38 002E6E (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000DB8DB8A8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000DB8DB8E8 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: UEFI 0x00000000DB8DB920 000042 (v01 00000000 00000000) [ 0.000000] ACPI: IVRS 0x00000000DB8DB968 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000DB8DBA38 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DBB30 000E96 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DC9C8 000850 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DB8DD218 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.000000] ACPI: WSMT 0x00000000DB8DEC60 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Using PIT calibration value [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000003deffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009cfffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff] [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000db678fff] [ 0.000000] node 0: [mem 0x00000000db7a0000-0x00000000db8cafff] [ 0.000000] node 0: [mem 0x00000000dceb5000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000003deffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003deffffff] [ 0.000000] On node 0 totalpages: 3917153 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12341 pages used for memmap [ 0.000000] DMA32 zone: 902597 pages, LIFO batch:31 [ 0.000000] Normal zone: 41160 pages used for memmap [ 0.000000] Normal zone: 3010560 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x8a/0x447 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 42 pages/cpu @ (ptrval) s132696 r8192 d31144 u262144 [ 0.000000] pcpu-alloc: s132696 r8192 d31144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3863575 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.13 ro root=/dev/myvg/rootlv noexec=on noexec32=on vga=0x0F01 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us acpi_enforce_resources=lax fbcon=font:VGA8x16 radeon.pcie_gen2=1 cgroup_disable=memory threadirqs plymouth.enable=0 rd.plymouth=0 mce=dont_log_ce panic=0 rd.lvm.vg=myvg radeon.dpm=1 zswap.enabled=1 rd.auto=1 audit=0 systemd.log_level=warning ip=192.168.10.70::192.168.10.98:255.255.255.0:::off:192.168.10.98 rd.neednet=1 net.ifnames=0 initrd=/initramfs-4.16.13.img [ 0.000000] audit: disabled (until reboot) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 15316912K/15668612K available (10248K kernel code, 558K rwdata, 2304K rodata, 944K init, 388K bss, 351700K reserved, 0K cma-reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x50 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180105 [ 0.000000] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180105/dswload-380) [ 0.000000] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180105/psobject-252) [ 0.000000] ACPI Error: AE_ALREADY_EXISTS, (SSDT: AMD PT) while loading table (20180105/tbxfload-228) [ 0.000000] ACPI Error: 1 table load failures, 7 successful (20180105/tbxfload-246) [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028000] tsc: Fast TSC calibration failed [ 0.036000] tsc: PIT calibration matches HPET. 1 loops [ 0.036000] tsc: Detected 3600.316 MHz processor [ 0.036000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e57d79b54, max_idle_ns: 440795238511 ns [ 0.036000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.63 BogoMIPS (lpj=14401264) [ 0.036000] pid_max: default: 32768 minimum: 301 [ 0.036000] Security Framework initialized [ 0.036000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036000] CPU: Physical Processor ID: 0 [ 0.036000] CPU: Processor Core ID: 0 [ 0.036000] mce: CPU supports 23 MCE banks [ 0.036000] LVT offset 1 assigned for vector 0xf9 [ 0.036000] LVT offset 2 assigned for vector 0xf4 [ 0.036000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.040001] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.043101] Spectre V2 : Mitigation: Full AMD retpoline [ 0.043290] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.043565] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.048286] Freeing SMP alternatives memory: 28K [ 0.056000] smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0) [ 0.068006] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.068223] ... version: 0 [ 0.068400] ... bit width: 48 [ 0.068578] ... generic registers: 6 [ 0.068756] ... value mask: 0000ffffffffffff [ 0.068948] ... max period: 00007fffffffffff [ 0.069140] ... fixed-purpose events: 0 [ 0.069316] ... event mask: 000000000000003f [ 0.076002] Hierarchical SRCU implementation. [ 0.087362] MCE: In-kernel MCE decoding enabled. [ 0.092002] smp: Bringing up secondary CPUs ... [ 0.120020] x86: Booting SMP configuration: [ 0.120210] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.290238] smp: Brought up 1 node, 8 CPUs [ 0.290238] smpboot: Max logical packages: 1 [ 0.290238] smpboot: Total of 8 processors activated (57605.05 BogoMIPS) [ 0.292218] devtmpfs: initialized [ 0.292388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292388] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.292578] xor: automatically using best checksumming function avx [ 0.293406] NET: Registered protocol family 16 [ 0.293788] cpuidle: using governor ladder [ 0.293788] cpuidle: using governor menu [ 0.293788] ACPI: bus type PCI registered [ 0.293788] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.293788] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.293788] PCI: Using configuration type 1 for base access [ 0.296832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.296832] cryptd: max_cpu_qlen set to 1000 [ 0.364006] raid6: sse2x1 gen() 8746 MB/s [ 0.432001] raid6: sse2x1 xor() 9706 MB/s [ 0.500003] raid6: sse2x2 gen() 18363 MB/s [ 0.568001] raid6: sse2x2 xor() 11620 MB/s [ 0.636001] raid6: sse2x4 gen() 18982 MB/s [ 0.704003] raid6: sse2x4 xor() 11111 MB/s [ 0.772001] raid6: avx2x1 gen() 20000 MB/s [ 0.840001] raid6: avx2x1 xor() 15475 MB/s [ 0.908001] raid6: avx2x2 gen() 26214 MB/s [ 0.976001] raid6: avx2x2 xor() 14635 MB/s [ 1.044004] raid6: avx2x4 gen() 27000 MB/s [ 1.112001] raid6: avx2x4 xor() 13653 MB/s [ 1.112189] raid6: using algorithm avx2x4 gen() 27000 MB/s [ 1.112383] raid6: .... xor() 13653 MB/s, rmw enabled [ 1.112572] raid6: using avx2x2 recovery algorithm [ 1.112808] ACPI: Added _OSI(Module Device) [ 1.112992] ACPI: Added _OSI(Processor Device) [ 1.113174] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.113359] ACPI: Added _OSI(Processor Aggregator Device) [ 1.113672] ACPI BIOS Error (bug): Failure looking up [\PTOS], AE_NOT_FOUND (20180105/psargs-364) [ 1.113672] ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180105/psparse-550) [ 1.113672] ACPI: Executed 2 blocks of module-level executable AML code [ 1.117124] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 1.118694] ACPI: Interpreter enabled [ 1.118878] ACPI: (supports S0 S5) [ 1.119047] ACPI: Using IOAPIC for interrupt routing [ 1.119492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.119971] ACPI: Enabled 3 GPEs in block 00 to 1F [ 1.121951] ACPI: Power Resource [P0ST] (on) [ 1.122170] ACPI: Power Resource [P3ST] (on) [ 1.126401] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.126610] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.127035] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.127313] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 1.127777] PCI host bridge to bus 0000:00 [ 1.127959] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.128003] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.128211] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.128419] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.128627] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.128893] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.129159] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 1.129424] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 1.129690] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.129890] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 1.129989] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 1.130133] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 1.130233] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 1.130338] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 1.130430] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 1.130529] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 1.130579] pci 0000:00:08.1: enabling Extended Tags [ 1.130825] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 1.130890] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 1.130940] pci 0000:00:08.2: enabling Extended Tags [ 1.131179] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 1.131268] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 1.131462] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 1.131645] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 1.131685] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 1.131731] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 1.131779] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 1.131817] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 1.132029] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 1.132067] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 1.132105] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 1.132210] pci 0000:01:00.0: [1022:43d0] type 00 class 0x0c0330 [ 1.132239] pci 0000:01:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit] [ 1.132340] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 1.132409] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601 [ 1.132470] pci 0000:01:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff] [ 1.132479] pci 0000:01:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref] [ 1.132529] pci 0000:01:00.1: PME# supported from D3hot D3cold [ 1.132572] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400 [ 1.132668] pci 0000:01:00.2: PME# supported from D3hot D3cold [ 1.144027] pci 0000:00:01.2: PCI bridge to [bus 01-08] [ 1.144234] pci 0000:00:01.2: bridge window [io 0xd000-0xefff] [ 1.144237] pci 0000:00:01.2: bridge window [mem 0xfe500000-0xfe8fffff] [ 1.144317] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400 [ 1.144437] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 1.144516] pci 0000:02:01.0: [1022:43c7] type 01 class 0x060400 [ 1.144631] pci 0000:02:01.0: PME# supported from D3hot D3cold [ 1.144701] pci 0000:02:02.0: [1022:43c7] type 01 class 0x060400 [ 1.144816] pci 0000:02:02.0: PME# supported from D3hot D3cold [ 1.144888] pci 0000:02:03.0: [1022:43c7] type 01 class 0x060400 [ 1.145003] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 1.145075] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400 [ 1.145190] pci 0000:02:04.0: PME# supported from D3hot D3cold [ 1.145270] pci 0000:02:09.0: [1022:43c7] type 01 class 0x060400 [ 1.145385] pci 0000:02:09.0: PME# supported from D3hot D3cold [ 1.145479] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 1.145685] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 1.145688] pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe7fffff] [ 1.145762] pci 0000:03:00.0: [9710:9922] type 00 class 0x070002 [ 1.145810] pci 0000:03:00.0: reg 0x10: [io 0xe010-0xe017] [ 1.145829] pci 0000:03:00.0: reg 0x14: [mem 0xfe703000-0xfe703fff] [ 1.145902] pci 0000:03:00.0: reg 0x24: [mem 0xfe702000-0xfe702fff] [ 1.146038] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 1.146126] pci 0000:03:00.1: [9710:9922] type 00 class 0x070002 [ 1.146171] pci 0000:03:00.1: reg 0x10: [io 0xe000-0xe007] [ 1.146191] pci 0000:03:00.1: reg 0x14: [mem 0xfe701000-0xfe701fff] [ 1.146263] pci 0000:03:00.1: reg 0x24: [mem 0xfe700000-0xfe700fff] [ 1.146385] pci 0000:03:00.1: PME# supported from D3hot D3cold [ 1.160039] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.160236] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 1.160236] pci 0000:02:00.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.160236] pci 0000:02:01.0: PCI bridge to [bus 04] [ 1.160325] pci 0000:02:02.0: PCI bridge to [bus 05] [ 1.160597] pci 0000:06:00.0: [8086:1539] type 00 class 0x020000 [ 1.160649] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe61ffff] [ 1.160686] pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd01f] [ 1.160706] pci 0000:06:00.0: reg 0x1c: [mem 0xfe620000-0xfe623fff] [ 1.160896] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.172030] pci 0000:02:03.0: PCI bridge to [bus 06] [ 1.172234] pci 0000:02:03.0: bridge window [io 0xd000-0xdfff] [ 1.172238] pci 0000:02:03.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.172298] pci 0000:02:04.0: PCI bridge to [bus 07] [ 1.172569] pci 0000:08:00.0: [1b21:1343] type 00 class 0x0c0330 [ 1.172617] pci 0000:08:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit] [ 1.172797] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 1.184028] pci 0000:02:09.0: PCI bridge to [bus 08] [ 1.184225] pci 0000:02:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 1.184225] pci 0000:09:00.0: [1002:15dd] type 00 class 0x030000 [ 1.184225] pci 0000:09:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.184225] pci 0000:09:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 1.184225] pci 0000:09:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 1.184225] pci 0000:09:00.0: reg 0x24: [mem 0xfe400000-0xfe47ffff] [ 1.184236] pci 0000:09:00.0: enabling Extended Tags [ 1.184530] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.184636] pci 0000:09:00.1: [1002:15de] type 00 class 0x040300 [ 1.184665] pci 0000:09:00.1: reg 0x10: [mem 0xfe488000-0xfe48bfff] [ 1.184737] pci 0000:09:00.1: enabling Extended Tags [ 1.184994] pci 0000:09:00.1: PME# supported from D1 D2 D3hot D3cold [ 1.185067] pci 0000:09:00.2: [1022:15df] type 00 class 0x108000 [ 1.185117] pci 0000:09:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff] [ 1.185150] pci 0000:09:00.2: reg 0x24: [mem 0xfe48c000-0xfe48dfff] [ 1.185170] pci 0000:09:00.2: enabling Extended Tags [ 1.185499] pci 0000:09:00.3: [1022:15e0] type 00 class 0x0c0330 [ 1.185534] pci 0000:09:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit] [ 1.185596] pci 0000:09:00.3: enabling Extended Tags [ 1.185860] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold [ 1.185934] pci 0000:09:00.4: [1022:15e1] type 00 class 0x0c0330 [ 1.185969] pci 0000:09:00.4: reg 0x10: [mem 0xfe100000-0xfe1fffff 64bit] [ 1.186030] pci 0000:09:00.4: enabling Extended Tags [ 1.186295] pci 0000:09:00.4: PME# supported from D0 D3hot D3cold [ 1.186365] pci 0000:09:00.6: [1022:15e3] type 00 class 0x040300 [ 1.186394] pci 0000:09:00.6: reg 0x10: [mem 0xfe480000-0xfe487fff] [ 1.186467] pci 0000:09:00.6: enabling Extended Tags [ 1.186723] pci 0000:09:00.6: PME# supported from D0 D3hot D3cold [ 1.186861] pci 0000:00:08.1: PCI bridge to [bus 09] [ 1.187054] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 1.187057] pci 0000:00:08.1: bridge window [mem 0xfe100000-0xfe4fffff] [ 1.187063] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.187134] pci 0000:0a:00.0: [1022:7901] type 00 class 0x010601 [ 1.187217] pci 0000:0a:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff] [ 1.187237] pci 0000:0a:00.0: enabling Extended Tags [ 1.187499] pci 0000:0a:00.0: PME# supported from D3hot D3cold [ 1.187597] pci 0000:00:08.2: PCI bridge to [bus 0a] [ 1.187792] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.187825] pci_bus 0000:00: on NUMA node 0 [ 1.188277] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 1.188534] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 1.188781] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 1.189042] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 1.189296] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 1.189543] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 1.189790] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 1.190036] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 1.192014] pci 0000:09:00.0: vgaarb: setting as boot VGA device [ 1.192213] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.192490] pci 0000:09:00.0: vgaarb: bridge control possible [ 1.192684] vgaarb: loaded [ 1.192941] SCSI subsystem initialized [ 1.193129] libata version 3.00 loaded. [ 1.193129] ACPI: bus type USB registered [ 1.193129] usbcore: registered new interface driver usbfs [ 1.193129] usbcore: registered new interface driver hub [ 1.193129] usbcore: registered new device driver usb [ 1.193129] pps_core: LinuxPPS API ver. 1 registered [ 1.193129] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.193129] EDAC MC: Ver: 3.0.0 [ 1.193129] PCI: Using ACPI for IRQ routing [ 1.196559] PCI: pci_cache_line_size set to 64 bytes [ 1.196668] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 1.196669] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 1.196670] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 1.196671] e820: reserve RAM buffer [mem 0xdb679000-0xdbffffff] [ 1.196671] e820: reserve RAM buffer [mem 0xdb8cb000-0xdbffffff] [ 1.196672] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 1.196672] e820: reserve RAM buffer [mem 0x3df000000-0x3dfffffff] [ 1.196857] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.197044] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.200003] clocksource: Switched to clocksource tsc-early [ 1.200003] VFS: Disk quotas dquot_6.6.0 [ 1.200003] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.200722] pnp: PnP ACPI init [ 1.200951] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.201164] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.201214] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 1.201430] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.201504] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.201599] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 1.201802] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 1.201999] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 1.202197] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.202362] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 1.202564] system 00:04: [io 0x040b] has been reserved [ 1.202754] system 00:04: [io 0x04d6] has been reserved [ 1.202945] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 1.203142] system 00:04: [io 0x0c14] has been reserved [ 1.203331] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 1.203527] system 00:04: [io 0x0c52] has been reserved [ 1.203717] system 00:04: [io 0x0c6c] has been reserved [ 1.203907] system 00:04: [io 0x0c6f] has been reserved [ 1.206949] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 1.207067] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 1.207185] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 1.207303] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 1.207421] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 1.207538] system 00:04: [io 0x0800-0x089f] has been reserved [ 1.207656] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 1.207769] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 1.207877] system 00:04: [io 0x0900-0x090f] has been reserved [ 1.207986] system 00:04: [io 0x0910-0x091f] has been reserved [ 1.208097] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.208211] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 1.208326] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 1.208438] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.208551] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 1.208666] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 1.208778] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 1.208892] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.209134] pnp: PnP ACPI: found 5 devices [ 1.215303] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.215511] pci 0000:02:00.0: PCI bridge to [bus 03] [ 1.215619] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 1.215729] pci 0000:02:00.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.215845] pci 0000:02:01.0: PCI bridge to [bus 04] [ 1.215955] pci 0000:02:02.0: PCI bridge to [bus 05] [ 1.216067] pci 0000:02:03.0: PCI bridge to [bus 06] [ 1.216171] pci 0000:02:03.0: bridge window [io 0xd000-0xdfff] [ 1.216281] pci 0000:02:03.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 1.216397] pci 0000:02:04.0: PCI bridge to [bus 07] [ 1.216506] pci 0000:02:09.0: PCI bridge to [bus 08] [ 1.216612] pci 0000:02:09.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 1.216727] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 1.216831] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 1.216941] pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe7fffff] [ 1.217056] pci 0000:00:01.2: PCI bridge to [bus 01-08] [ 1.217160] pci 0000:00:01.2: bridge window [io 0xd000-0xefff] [ 1.217269] pci 0000:00:01.2: bridge window [mem 0xfe500000-0xfe8fffff] [ 1.217384] pci 0000:00:08.1: PCI bridge to [bus 09] [ 1.217487] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 1.217596] pci 0000:00:08.1: bridge window [mem 0xfe100000-0xfe4fffff] [ 1.217708] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.217859] pci 0000:00:08.2: PCI bridge to [bus 0a] [ 1.217963] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.218078] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.218079] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.218080] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.218080] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.218081] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.218082] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.218083] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 1.218084] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 1.218085] pci_bus 0000:01: resource 0 [io 0xd000-0xefff] [ 1.218086] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe8fffff] [ 1.218087] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 1.218087] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe7fffff] [ 1.218088] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 1.218089] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff] [ 1.218090] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 1.218091] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff] [ 1.218092] pci_bus 0000:08: resource 1 [mem 0xfe500000-0xfe5fffff] [ 1.218093] pci_bus 0000:09: resource 0 [io 0xf000-0xffff] [ 1.218094] pci_bus 0000:09: resource 1 [mem 0xfe100000-0xfe4fffff] [ 1.218094] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 1.218095] pci_bus 0000:0a: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.218230] NET: Registered protocol family 2 [ 1.218522] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 1.218688] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.218942] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.219142] TCP: Hash tables configured (established 131072 bind 65536) [ 1.219295] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.219428] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.219620] NET: Registered protocol family 1 [ 1.219955] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.220276] PCI: CLS 64 bytes, default 64 [ 1.220312] Trying to unpack rootfs image as initramfs... [ 1.466459] Freeing initrd memory: 22152K [ 1.466668] AMD-Vi: IOMMU performance counters supported [ 1.466935] pci 0000:00:00.2: can't derive routing for PCI INT A [ 1.467139] pci 0000:00:00.2: PCI INT A: not connected [ 1.468115] iommu: Adding device 0000:00:01.0 to group 0 [ 1.468701] iommu: Adding device 0000:00:01.2 to group 1 [ 1.469285] iommu: Adding device 0000:00:08.0 to group 2 [ 1.469866] iommu: Adding device 0000:00:08.1 to group 3 [ 1.470074] iommu: Adding device 0000:00:08.2 to group 2 [ 1.470622] iommu: Adding device 0000:00:14.0 to group 4 [ 1.470826] iommu: Adding device 0000:00:14.3 to group 4 [ 1.471405] iommu: Adding device 0000:00:18.0 to group 5 [ 1.471616] iommu: Adding device 0000:00:18.1 to group 5 [ 1.471819] iommu: Adding device 0000:00:18.2 to group 5 [ 1.472027] iommu: Adding device 0000:00:18.3 to group 5 [ 1.472231] iommu: Adding device 0000:00:18.4 to group 5 [ 1.472433] iommu: Adding device 0000:00:18.5 to group 5 [ 1.472637] iommu: Adding device 0000:00:18.6 to group 5 [ 1.472869] iommu: Adding device 0000:00:18.7 to group 5 [ 1.473430] iommu: Adding device 0000:01:00.0 to group 6 [ 1.473646] iommu: Adding device 0000:01:00.1 to group 6 [ 1.473862] iommu: Adding device 0000:01:00.2 to group 6 [ 1.474066] iommu: Adding device 0000:02:00.0 to group 6 [ 1.474270] iommu: Adding device 0000:02:01.0 to group 6 [ 1.474473] iommu: Adding device 0000:02:02.0 to group 6 [ 1.474684] iommu: Adding device 0000:02:03.0 to group 6 [ 1.474888] iommu: Adding device 0000:02:04.0 to group 6 [ 1.475090] iommu: Adding device 0000:02:09.0 to group 6 [ 1.475298] iommu: Adding device 0000:03:00.0 to group 6 [ 1.475502] iommu: Adding device 0000:03:00.1 to group 6 [ 1.475712] iommu: Adding device 0000:06:00.0 to group 6 [ 1.475922] iommu: Adding device 0000:08:00.0 to group 6 [ 1.476563] iommu: Adding device 0000:09:00.0 to group 7 [ 1.476824] iommu: Using direct mapping for device 0000:09:00.0 [ 1.477085] iommu: Adding device 0000:09:00.1 to group 8 [ 1.477307] iommu: Adding device 0000:09:00.2 to group 8 [ 1.477529] iommu: Adding device 0000:09:00.3 to group 8 [ 1.477751] iommu: Adding device 0000:09:00.4 to group 8 [ 1.477952] iommu: Adding device 0000:09:00.6 to group 8 [ 1.478137] iommu: Adding device 0000:0a:00.0 to group 2 [ 1.478488] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.478657] AMD-Vi: Extended features (0x4f77ef22294ada): [ 1.478827] PPR NX GT IA GA PC GA_vAPIC [ 1.478983] AMD-Vi: Interrupt remapping enabled [ 1.479144] AMD-Vi: virtual APIC enabled [ 1.564031] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.564986] amd_uncore: AMD NB counters detected [ 1.565179] amd_uncore: AMD LLC counters detected [ 1.565660] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 1.565894] Scanning for low memory corruption every 60 seconds [ 1.590056] Initialise system trusted keyrings [ 1.590300] workingset: timestamp_bits=62 max_order=22 bucket_order=0 [ 1.749834] NET: Registered protocol family 38 [ 1.750027] Key type asymmetric registered [ 1.750204] Asymmetric key parser 'x509' registered [ 1.750415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.750681] io scheduler noop registered (default) [ 1.752772] pcieport 0000:00:01.2: AER enabled with IRQ 28 [ 1.753048] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.753331] ACPI: Power Button [PWRB] [ 1.753539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.753810] ACPI: Power Button [PWRF] [ 1.754013] Monitor-Mwait will be used to enter C-1 state [ 1.755108] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.777845] 0000:03:00.0: ttyS0 at I/O 0xe010 (irq = 32, base_baud = 115200) is a ST16650V2 [ 1.800399] 0000:03:00.1: ttyS1 at I/O 0xe000 (irq = 25, base_baud = 115200) is a ST16650V2 [ 1.802274] brd: module loaded [ 1.803913] loop: module loaded [ 1.804136] ahci 0000:01:00.1: version 3.0 [ 1.804243] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 1.804523] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 1.804801] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.805675] scsi host0: ahci [ 1.805981] scsi host1: ahci [ 1.806233] scsi host2: ahci [ 1.806499] scsi host3: ahci [ 1.806756] scsi host4: ahci [ 1.807018] scsi host5: ahci [ 1.807277] scsi host6: ahci [ 1.807545] scsi host7: ahci [ 1.807742] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 40 [ 1.808014] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 40 [ 1.808281] ata3: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880200 irq 40 [ 1.808547] ata4: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880280 irq 40 [ 1.808814] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 40 [ 1.809081] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 40 [ 1.809347] ata7: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880400 irq 40 [ 1.813035] ata8: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880480 irq 40 [ 1.813512] ahci 0000:0a:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.813804] ahci 0000:0a:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs [ 1.814089] ahci 0000:0a:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented [ 1.814673] scsi host8: ahci [ 1.814958] scsi host9: ahci [ 1.815168] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 42 [ 1.815347] ata10: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900180 irq 43 [ 1.815537] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.815689] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.048135] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.048355] igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e0:d5:5e:a3:6b:35 [ 2.048569] igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF [ 2.048759] igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.049059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.049273] ehci-pci: EHCI PCI platform driver [ 2.049466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.049669] ohci-pci: OHCI PCI platform driver [ 2.049914] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.050113] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 2.103374] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410 [ 2.104111] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.104323] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.104585] usb usb1: Product: xHCI Host Controller [ 2.104770] usb usb1: Manufacturer: Linux 4.16.13 xhci-hcd [ 2.104962] usb usb1: SerialNumber: 0000:01:00.0 [ 2.105240] hub 1-0:1.0: USB hub found [ 2.105438] hub 1-0:1.0: 14 ports detected [ 2.105867] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.106062] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 2.106328] xhci_hcd 0000:01:00.0: Host supports USB 3.10 Enhanced SuperSpeed [ 2.106569] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.106856] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.107069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.107330] usb usb2: Product: xHCI Host Controller [ 2.107515] usb usb2: Manufacturer: Linux 4.16.13 xhci-hcd [ 2.107707] usb usb2: SerialNumber: 0000:01:00.0 [ 2.107944] hub 2-0:1.0: USB hub found [ 2.108132] hub 2-0:1.0: 8 ports detected [ 2.108355] usb: port power management may be unreliable [ 2.108714] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 2.108911] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3 [ 2.130387] ata9: SATA link down (SStatus 0 SControl 300) [ 2.130617] ata10: SATA link down (SStatus 0 SControl 300) [ 2.168094] xhci_hcd 0000:08:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010 [ 2.169511] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.169729] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.169991] usb usb3: Product: xHCI Host Controller [ 2.170176] usb usb3: Manufacturer: Linux 4.16.13 xhci-hcd [ 2.170368] usb usb3: SerialNumber: 0000:08:00.0 [ 2.170614] hub 3-0:1.0: USB hub found [ 2.170797] hub 3-0:1.0: 2 ports detected [ 2.171028] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 2.171223] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4 [ 2.171487] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.171720] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.172006] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.172217] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.172478] usb usb4: Product: xHCI Host Controller [ 2.172664] usb usb4: Manufacturer: Linux 4.16.13 xhci-hcd [ 2.172856] usb usb4: SerialNumber: 0000:08:00.0 [ 2.173087] hub 4-0:1.0: USB hub found [ 2.173272] hub 4-0:1.0: 2 ports detected [ 2.173578] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.173776] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 5 [ 2.174226] xhci_hcd 0000:09:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x40000410 [ 2.175379] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.175592] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.175853] usb usb5: Product: xHCI Host Controller [ 2.176041] usb usb5: Manufacturer: Linux 4.16.13 xhci-hcd [ 2.176232] usb usb5: SerialNumber: 0000:09:00.3 [ 2.176458] hub 5-0:1.0: USB hub found [ 2.176642] hub 5-0:1.0: 4 ports detected [ 2.177057] xhci_hcd 0000:09:00.3: xHCI Host Controller [ 2.177257] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 6 [ 2.177522] xhci_hcd 0000:09:00.3: Host supports USB 3.10 Enhanced SuperSpeed [ 2.177757] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.178038] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.178246] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.178507] usb usb6: Product: xHCI Host Controller [ 2.178692] usb usb6: Manufacturer: Linux 4.16.13 xhci-hcd [ 2.178885] usb usb6: SerialNumber: 0000:09:00.3 [ 2.179128] hub 6-0:1.0: USB hub found [ 2.179313] hub 6-0:1.0: 4 ports detected [ 2.179789] xhci_hcd 0000:09:00.4: xHCI Host Controller [ 2.179980] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 7 [ 2.180409] xhci_hcd 0000:09:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x40000410 [ 2.181492] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.181704] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.181966] usb usb7: Product: xHCI Host Controller [ 2.182152] usb usb7: Manufacturer: Linux 4.16.13 xhci-hcd [ 2.182344] usb usb7: SerialNumber: 0000:09:00.4 [ 2.182584] hub 7-0:1.0: USB hub found [ 2.182715] hub 7-0:1.0: 1 port detected [ 2.182860] xhci_hcd 0000:09:00.4: xHCI Host Controller [ 2.182984] xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 8 [ 2.183153] xhci_hcd 0000:09:00.4: Host supports USB 3.10 Enhanced SuperSpeed [ 2.183300] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.183483] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.183606] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.183767] usb usb8: Product: xHCI Host Controller [ 2.183879] usb usb8: Manufacturer: Linux 4.16.13 xhci-hcd [ 2.183994] usb usb8: SerialNumber: 0000:09:00.4 [ 2.184156] hub 8-0:1.0: USB hub found [ 2.184269] hub 8-0:1.0: 1 port detected [ 2.184434] i8042: PNP: No PS/2 controller found. [ 2.184572] mousedev: PS/2 mouse device common for all mice [ 2.184732] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 2.184882] rtc_cmos 00:02: RTC can wake from S4 [ 2.185088] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.185272] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.185441] pps_ldisc: PPS line discipline registered [ 2.185645] device-mapper: uevent: version 1.0.3 [ 2.185797] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.186179] NET: Registered protocol family 10 [ 2.186550] Segment Routing with IPv6 [ 2.186681] NET: Registered protocol family 17 [ 2.186806] Key type dns_resolver registered [ 2.187645] microcode: CPU0: patch_level=0x08101007 [ 2.187759] microcode: CPU1: patch_level=0x08101007 [ 2.187867] microcode: CPU2: patch_level=0x08101007 [ 2.190754] microcode: CPU3: patch_level=0x08101007 [ 2.190859] microcode: CPU4: patch_level=0x08101007 [ 2.190963] microcode: CPU5: patch_level=0x08101007 [ 2.191075] microcode: CPU6: patch_level=0x08101007 [ 2.191182] microcode: CPU7: patch_level=0x08101007 [ 2.191299] microcode: Microcode Update Driver: v2.2. [ 2.191316] sched_clock: Marking stable (2191295911, 0)->(2271809703, -80513792) [ 2.191706] registered taskstats version 1 [ 2.191808] Loading compiled-in X.509 certificates [ 2.192387] rtc_cmos 00:02: setting system clock to 2018-05-30 14:07:51 UTC (1527689271) [ 2.288025] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.289498] ata1.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.289708] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.291322] ata1.00: configured for UDMA/133 [ 2.291609] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.292105] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.292376] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.292576] sd 0:0:0:0: [sda] Write Protect is off [ 2.292761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.292776] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.312804] sda: sda1 sda2 sda4 [ 2.313187] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.440008] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 2.588317] tsc: Refined TSC clocksource calibration: 3600.016 MHz [ 2.588550] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e462c2dec, max_idle_ns: 440795368719 ns [ 2.588921] clocksource: Switched to clocksource tsc [ 2.764399] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.766126] ata2.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133 [ 2.766352] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.767464] ata2.00: configured for UDMA/133 [ 2.767757] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5 [ 2.768299] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.768605] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.768825] sd 1:0:0:0: [sdb] Write Protect is off [ 2.769022] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.769055] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.787253] sdb: sdb1 sdb2 sdb4 [ 2.787658] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.847760] usb 1-4: New USB device found, idVendor=046d, idProduct=082c [ 2.847977] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 2.848199] usb 1-4: Product: HD Webcam C615 [ 2.848379] usb 1-4: SerialNumber: F6629A60 [ 2.980342] usb 1-9: new low-speed USB device number 3 using xhci_hcd [ 3.241032] usb 1-9: New USB device found, idVendor=046d, idProduct=c312 [ 3.241267] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.241497] usb 1-9: Product: USB Multimedia Keyboard [ 3.241698] usb 1-9: Manufacturer: LITEON Technology [ 3.244369] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.245768] ata3.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 3.245995] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.247501] ata3.00: configured for UDMA/133 [ 3.247832] scsi 2:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 3.248351] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.248648] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 3.248868] sd 2:0:0:0: [sdc] Write Protect is off [ 3.249064] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.249084] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.258560] sdc: sdc1 sdc2 sdc4 [ 3.259141] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.372336] usb 1-10: new low-speed USB device number 4 using xhci_hcd [ 3.628418] usb 1-10: New USB device found, idVendor=046d, idProduct=c018 [ 3.628654] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.628920] usb 1-10: Product: USB Optical Mouse [ 3.629105] usb 1-10: Manufacturer: Logitech [ 3.724388] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.728434] ata4.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133 [ 3.728653] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.735804] ata4.00: configured for UDMA/133 [ 3.736101] scsi 3:0:0:0: Direct-Access ATA WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 3.736573] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.736867] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 3.737111] sd 3:0:0:0: [sdd] Write Protect is off [ 3.737308] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.737325] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.745103] sdd: sdd1 sdd2 sdd4 [ 3.745713] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.760066] usb 1-13: new full-speed USB device number 5 using xhci_hcd [ 4.050708] ata5: SATA link down (SStatus 0 SControl 330) [ 4.101631] usb 1-13: New USB device found, idVendor=04d8, idProduct=f5fe [ 4.101868] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.102152] usb 1-13: Product: TrueRNG [ 4.102337] usb 1-13: Manufacturer: ubld.it [ 4.528389] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.531396] ata6.00: ATAPI: PLEXTOR DVDR PX-891SA, 1.04, max UDMA/100 [ 4.537137] ata6.00: configured for UDMA/100 [ 4.539591] scsi 5:0:0:0: CD-ROM PLEXTOR DVDR PX-891SA 1.04 PQ: 0 ANSI: 5 [ 5.620364] ata7: failed to resume link (SControl 0) [ 5.620589] ata7: SATA link down (SStatus 0 SControl 0) [ 5.936355] ata8: SATA link down (SStatus 0 SControl 330) [ 6.081289] Freeing unused kernel memory: 944K [ 6.081480] Write protecting the kernel read-only data: 16384k [ 6.082883] Freeing unused kernel memory: 2020K [ 6.085346] Freeing unused kernel memory: 1792K [ 6.141427] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.141871] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.145820] random: systemd: uninitialized urandom read (16 bytes read) [ 6.146691] random: systemd: uninitialized urandom read (16 bytes read) [ 6.147519] random: systemd: uninitialized urandom read (16 bytes read) [ 6.157796] i2c /dev entries driver [ 6.379629] usbcore: registered new interface driver usbhid [ 6.379872] usbhid: USB HID core driver [ 6.382397] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-9/1-9:1.0/0003:046D:C312.0001/input/input3 [ 6.412863] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.413027] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.413207] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6.440031] hid-generic 0003:046D:C312.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:01:00.0-9/input0 [ 6.440347] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-10/1-10:1.0/0003:046D:C018.0002/input/input4 [ 6.440582] hid-generic 0003:046D:C018.0002: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-10/input0 [ 6.472243] random: fast init done [ 6.482805] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.669050] md: kicking non-fresh sdb1 from array! [ 6.670520] md: kicking non-fresh sdb2 from array! [ 6.696951] md/raid1:md0: active with 3 out of 4 mirrors [ 6.697168] md0: detected capacity change from 0 to 536805376 [ 6.701509] random: crng init done [ 6.701708] random: 7 urandom warning(s) missed due to ratelimiting [ 6.712795] md/raid10:md1: active with 3 out of 4 devices [ 6.713008] md1: detected capacity change from 0 to 3997621551104 [ 9.504657] igb 0000:06:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 9.505362] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.027867] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 15.851090] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 17.894928] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 17.895370] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 18.423009] systemd[1]: /usr/lib/systemd/system/rsyslog.service:21: Unknown lvalue 'LimitNOFILE' in section 'Install' [ 18.864463] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 18.978084] RPC: Registered named UNIX socket transport module. [ 18.978317] RPC: Registered udp transport module. [ 18.978520] RPC: Registered tcp transport module. [ 18.978732] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.979511] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 19.048000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 19.797792] acpi_cpufreq: overriding BIOS provided _PSD data [ 19.798133] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 19.798435] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 20.014436] EDAC amd64: Node 0: DRAM ECC disabled. [ 20.014657] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 20.068818] EDAC amd64: Node 0: DRAM ECC disabled. [ 20.069030] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 20.167496] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x7, too many assigned pins [ 20.167790] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x9, too many assigned pins [ 20.168102] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xb, too many assigned pins [ 20.168397] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xd, too many assigned pins [ 20.168671] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 20.168974] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.169247] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.169516] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 [ 20.169721] snd_hda_codec_generic hdaudioC0D0: dig-out=0x3/0x5 [ 20.169922] snd_hda_codec_generic hdaudioC0D0: inputs: [ 20.171182] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input5 [ 20.171534] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input6 [ 20.214727] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 20.215031] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.215309] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 20.215575] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 20.215777] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 20.215977] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 20.216174] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 20.216399] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 20.216598] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 20.236247] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input7 [ 20.236466] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input8 [ 20.236718] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input9 [ 20.236936] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input10 [ 20.237150] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input11 [ 20.237367] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input12 [ 20.237582] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card1/input13 [ 20.548194] cdc_acm 1-13:1.0: ttyACM0: USB ACM device [ 20.550493] usbcore: registered new interface driver cdc_acm [ 20.550726] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 20.585463] [drm] amdgpu kernel modesetting enabled. [ 20.585872] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1458:0xD000 0xC6). [ 20.586192] [drm] register mmio base: 0xFE400000 [ 20.586392] [drm] register mmio size: 524288 [ 20.657905] Linux video capture interface: v2.00 [ 20.700848] [drm] probing gen 2 caps for device 1022:15db = 700d03/e [ 20.701063] [drm] probing mlw for device 1022:15db = 700d03 [ 20.701498] [drm] VCN decode is enabled in VM mode [ 20.701686] [drm] VCN encode is enabled in VM mode [ 20.721053] usbcore: registered new interface driver snd-usb-audio [ 20.726039] [drm] BIOS signature incorrect 5b 7 [ 20.726166] ATOM BIOS: 113-RAVEN-104 [ 20.726303] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 20.726473] amdgpu 0000:09:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used) [ 20.726634] amdgpu 0000:09:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF [ 20.726786] [drm] Detected VRAM RAM=1024M, BAR=256M [ 20.726888] [drm] RAM width 128bits UNKNOWN [ 20.727079] [TTM] Zone kernel: Available graphics memory: 7704900 kiB [ 20.727211] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 20.727325] [TTM] Initializing pool allocator [ 20.727430] [TTM] Initializing DMA pool allocator [ 20.727596] [drm] amdgpu: 1024M of VRAM memory ready [ 20.727713] [drm] amdgpu: 3072M of GTT memory ready. [ 20.727838] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 20.728221] [drm] PCIE GART of 1024M enabled (table at 0x000000F400800000). [ 20.737502] uvcvideo: Found UVC 1.00 device HD Webcam C615 (046d:082c) [ 20.760069] input: HD Webcam C615 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-4/1-4:1.2/input/input14 [ 20.760286] usbcore: registered new interface driver uvcvideo [ 20.760419] USB Video Class driver (1.1.1) [ 20.998698] [drm] use_doorbell being set to: [true] [ 21.008856] [drm] Found VCN firmware Version: 1.73 Family ID: 18 [ 21.160540] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1! type 0 expected 3 [ 21.160743] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3 [ 21.160939] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:3! type 0 expected 3 [ 21.162526] [drm] Display Core initialized with v3.1.27! [ 21.187893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 21.187988] [drm] Driver supports precise vblank timestamp query. [ 21.210827] [drm] VCN decode and encode initialized successfully. [ 21.223227] [drm] fb mappable at 0xE1000000 [ 21.223319] [drm] vram apper at 0xE0000000 [ 21.223409] [drm] size 33177600 [ 21.223494] [drm] fb depth is 24 [ 21.223578] [drm] pitch is 15360 [ 21.223716] fbcon: amdgpudrmfb (fb0) is primary device [ 21.330177] Console: switching to colour frame buffer device 480x135 [ 21.363479] amdgpu 0000:09:00.0: fb0: amdgpudrmfb frame buffer device [ 21.392119] amdgpu 0000:09:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 21.392123] amdgpu 0000:09:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 21.392125] amdgpu 0000:09:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 21.392127] amdgpu 0000:09:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 21.392130] amdgpu 0000:09:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 21.392132] amdgpu 0000:09:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 21.392134] amdgpu 0000:09:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 21.392136] amdgpu 0000:09:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 21.392138] amdgpu 0000:09:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 21.392140] amdgpu 0000:09:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 21.392143] amdgpu 0000:09:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 21.392145] amdgpu 0000:09:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1 [ 21.392147] amdgpu 0000:09:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1 [ 21.392149] amdgpu 0000:09:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1 [ 21.395722] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:09:00.0 on minor 0 [ 35.578546] sysrq: SysRq : Terminate All Tasks [ 37.132783] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 37.557469] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 38.089731] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 38.483493] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 40.083182] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 40.644634] Adding 1023996k swap on /dev/mapper/swapb. Priority:-2 extents:1 across:1023996k [ 40.659448] Adding 1023996k swap on /dev/mapper/swapa. Priority:-3 extents:1 across:1023996k [ 40.679559] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 41.001153] Adding 1023996k swap on /dev/mapper/swapd. Priority:-4 extents:1 across:1023996k [ 41.222373] Adding 1023996k swap on /dev/mapper/swapc. Priority:-5 extents:1 across:1023996k [ 53.897442] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 54.464437] pps pps0: new PPS source serial0 [ 54.464445] pps pps0: source "/dev/ttyS0" added [ 54.729998] it87: Found IT8733E chip at 0xa60, revision 3 [ 54.734722] it87: Beeping is supported [ 59.518674] igb 0000:06:00.0: changing MTU from 1500 to 7200 [ 61.522005] NFSD: starting 90-second grace period (net f0000099) [ 63.328576] igb 0000:06:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 95.424191] fuse init (API version 7.26) [ 139.047223] amdgpu: [powerplay] pp_dpm_get_temperature was not implemented. [ 139.047237] amdgpu: [powerplay] pp_dpm_get_temperature was not implemented. [ 162.390334] it87: loading out-of-tree module taints kernel. [ 162.390836] it87: it87 driver version v1.0-42-g7182608 [ 162.390913] it87: Found IT8686E chip at 0xa40, revision 2 [ 162.390968] it87: Beeping is supported [ 162.392614] it87: Found IT8792E/IT8795E chip at 0xa60, revision 3 [ 162.392659] it87: Beeping is supported [ 164.287972] amdgpu: [powerplay] pp_dpm_get_temperature was not implemented. [ 164.287987] amdgpu: [powerplay] pp_dpm_get_temperature was not implemented. [ 5607.393175] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393183] amdgpu 0000:09:00.0: at page 0x0000800127e00000 from 27 [ 5607.393187] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x003C0071 [ 5607.393194] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393197] amdgpu 0000:09:00.0: at page 0x0000800127e01000 from 27 [ 5607.393201] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x003C0071 [ 5607.393206] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393209] amdgpu 0000:09:00.0: at page 0x0000800127e04000 from 27 [ 5607.393213] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x003C0071 [ 5607.393219] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393224] amdgpu 0000:09:00.0: at page 0x0000800127e05000 from 27 [ 5607.393227] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x003C0071 [ 5607.393576] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393580] amdgpu 0000:09:00.0: at page 0x0000800127e02000 from 27 [ 5607.393583] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x003C0071 [ 5607.393588] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393591] amdgpu 0000:09:00.0: at page 0x0000800127e03000 from 27 [ 5607.393593] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [ 5607.393598] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393600] amdgpu 0000:09:00.0: at page 0x0000800127e00000 from 27 [ 5607.393603] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [ 5607.393607] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393610] amdgpu 0000:09:00.0: at page 0x0000800127e01000 from 27 [ 5607.393612] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [ 5607.393618] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393621] amdgpu 0000:09:00.0: at page 0x0000800127e06000 from 27 [ 5607.393624] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [ 5607.393630] amdgpu 0000:09:00.0: [gfxhub] VMC page fault (src_id:0 ring:56 vmid:3 pas_id:0) [ 5607.393632] amdgpu 0000:09:00.0: at page 0x0000800127e07000 from 27 [ 5607.393634] amdgpu 0000:09:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00000000 [ 5617.628462] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, last signaled seq=277054, last emitted seq=277056 [ 5617.628466] [drm] IP block:psp is hung! [ 5617.628468] [drm] GPU recovery disabled.