Attachment 132784 Details for Bug 98517 – DMESG debug.drm 4.12.1

DMESG debug.drm 4.12.1

cur_debug.txt (text/plain), 29.89 KB, created by Pablo Cholaky on 2017-07-20 07:11:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pablo Cholaky

Created: 2017-07-20 07:11:54 UTC

Size: 29.89 KB

patch

obsolete

>[16862.420071] PM: Syncing filesystems ... done.
>[16862.439784] PM: Preparing system for sleep (mem)
>[16862.624908] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[16862.626536] OOM killer disabled.
>[16862.626553] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[16862.627807] PM: Suspending system (mem)
>[16862.627824] Suspending console(s) (use no_console_suspend to debug)
>[16862.628410] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
>[16862.628420] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
>[16862.628425] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
>[16862.628729] sd 2:0:0:0: [sdc] Stopping disk
>[16862.633358] sd 3:0:0:0: [sdd] Stopping disk
>[16862.633419] sd 1:0:0:0: [sdb] Stopping disk
>[16862.666536] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[16862.666619] sd 0:0:0:0: [sda] Stopping disk
>[16863.213608] ACPI : EC: event blocked
>[16863.221971] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
>[16863.222014] [drm:intel_edp_backlight_off.part.22 [i915]] 
>[16864.430837] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[16864.430919] [drm:intel_disable_pipe [i915]] disabling pipe A
>[16864.433025] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[16864.433119] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
>[16864.433342] [drm:intel_edp_panel_off.part.20 [i915]] Turn eDP port A panel power off
>[16864.433403] [drm:intel_edp_panel_off.part.20 [i915]] Wait for panel power off time
>[16864.433501] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000
>[16864.484433] [drm:wait_panel_status [i915]] Wait complete
>[16864.484471] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
>[16864.484506] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 32
>[16864.484534] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
>[16864.484577] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DDI A]
>[16864.484607] [drm:verify_connector_state.isra.48 [i915]] [CONNECTOR:48:eDP-1]
>[16864.484634] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 0
>[16864.484660] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 1
>[16864.484684] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 2
>[16864.484707] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 3
>[16864.484739] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[16864.487085] PM: suspend of devices complete after 1859.029 msecs
>[16864.487559] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
>[16864.487585] [drm:skl_set_power_well [i915]] Disabling DDI D IO power well
>[16864.487609] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
>[16864.487632] [drm:skl_set_power_well [i915]] Disabling DDI C IO power well
>[16864.487654] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
>[16864.487676] [drm:skl_set_power_well [i915]] Disabling DDI B IO power well
>[16864.487697] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
>[16864.487719] [drm:skl_set_power_well [i915]] Disabling DDI A/E IO power well
>[16864.487740] [drm:intel_power_well_disable [i915]] disabling power well 2
>[16864.487766] [drm:skl_set_power_well [i915]] Disabling power well 2
>[16864.487800] [drm:intel_power_well_disable [i915]] disabling DC off
>[16864.487820] [drm:intel_power_well_disable [i915]] disabling always-on
>[16864.487842] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[16864.490029] [drm:intel_update_cdclk [i915]] Current CD clock rate: 24000 kHz, VCO: 0 kHz, ref: 24000 kHz
>[16864.490051] [drm:intel_power_well_disable [i915]] disabling MISC IO power well
>[16864.490075] [drm:skl_set_power_well [i915]] Disabling MISC IO power well
>[16864.490098] [drm:intel_power_well_disable [i915]] disabling power well 1
>[16864.490123] [drm:skl_set_power_well [i915]] Disabling power well 1
>[16864.501837] PM: late suspend of devices complete after 14.747 msecs
>[16864.502291] ACPI : EC: interrupt blocked
>[16864.503215] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[16864.515566] PM: noirq suspend of devices complete after 13.726 msecs
>[16864.516138] ACPI: Preparing to enter system sleep state S3
>[16864.517650] ACPI : EC: EC stopped
>[16864.517651] PM: Saving platform NVS memory
>[16864.517661] Disabling non-boot CPUs ...
>[16864.519167] smpboot: CPU 1 is now offline
>[16864.533926] smpboot: CPU 2 is now offline
>[16864.549884] smpboot: CPU 3 is now offline
>[16864.566747] smpboot: CPU 4 is now offline
>[16864.582405] smpboot: CPU 5 is now offline
>[16864.596784] smpboot: CPU 6 is now offline
>[16864.613279] smpboot: CPU 7 is now offline
>[16864.619474] ACPI: Low-level resume complete
>[16864.619554] ACPI : EC: EC started
>[16864.619554] PM: Restoring platform NVS memory
>[16864.620252] Suspended for 4.749 seconds
>[16864.620295] Enabling non-boot CPUs ...
>[16864.623563] x86: Booting SMP configuration:
>[16864.623563] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[16864.624045]  cache: parent cpu1 should not be sleeping
>[16864.624163] CPU1 is up
>[16864.628707] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[16864.629284]  cache: parent cpu2 should not be sleeping
>[16864.629401] CPU2 is up
>[16864.636722] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[16864.637270]  cache: parent cpu3 should not be sleeping
>[16864.637395] CPU3 is up
>[16864.644804] smpboot: Booting Node 0 Processor 4 APIC 0x1
>[16864.645419]  cache: parent cpu4 should not be sleeping
>[16864.645555] CPU4 is up
>[16864.652886] smpboot: Booting Node 0 Processor 5 APIC 0x3
>[16864.653442]  cache: parent cpu5 should not be sleeping
>[16864.653587] CPU5 is up
>[16864.660963] smpboot: Booting Node 0 Processor 6 APIC 0x5
>[16864.661516]  cache: parent cpu6 should not be sleeping
>[16864.661675] CPU6 is up
>[16864.669024] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[16864.669632]  cache: parent cpu7 should not be sleeping
>[16864.669816] CPU7 is up
>[16864.676532] ACPI: Waking up from system sleep state S3
>[16864.681560] ACPI : EC: interrupt unblocked
>[16864.693831] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[16864.694139] PM: noirq resume of devices complete after 12.679 msecs
>[16864.694461] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[16864.694493] [drm:intel_power_well_enable [i915]] enabling power well 1
>[16864.694522] [drm:intel_power_well_enable [i915]] enabling MISC IO power well
>[16864.694558] [drm:skl_init_cdclk [i915]] Sanitizing cdclk programmed by pre-os
>[16864.696325] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[16864.696819] [drm:intel_power_well_enable [i915]] enabling always-on
>[16864.696839] [drm:intel_power_well_enable [i915]] enabling DC off
>[16864.696860] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[16864.696882] [drm:intel_power_well_enable [i915]] enabling power well 2
>[16864.696902] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[16864.696922] [drm:skl_set_power_well [i915]] Enabling DDI A/E IO power well
>[16864.696940] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
>[16864.696959] [drm:skl_set_power_well [i915]] Enabling DDI B IO power well
>[16864.696977] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[16864.696995] [drm:skl_set_power_well [i915]] Enabling DDI C IO power well
>[16864.697014] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
>[16864.697033] [drm:skl_set_power_well [i915]] Enabling DDI D IO power well
>[16864.699396] PM: early resume of devices complete after 5.215 msecs
>[16864.699488] ACPI : EC: event unblocked
>[16864.699578] ACPI : button: The lid device is not compliant to SW_LID.
>[16864.699687] sd 1:0:0:0: [sdb] Starting disk
>[16864.699688] sd 3:0:0:0: [sdd] Starting disk
>[16864.699694] sd 2:0:0:0: [sdc] Starting disk
>[16864.699702] sd 0:0:0:0: [sda] Starting disk
>[16864.699952] rtc_cmos 00:02: System wakeup disabled by ACPI
>[16864.700513] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x5fb95018
>[16864.700562] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[16864.700588] [drm:intel_opregion_setup [i915]] SWSCI supported
>[16864.706685] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[16864.706710] [drm:intel_opregion_setup [i915]] ASLE supported
>[16864.706730] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[16864.706751] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[16864.707390] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af04
>[16864.707699] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs
>[16864.707737] [drm:init_workarounds_ring [i915]] rcs: Number of context specific w/a: 14
>[16864.707805] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs
>[16864.707874] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs
>[16864.707941] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs
>[16864.708024] [drm:intel_huc_init_hw [i915]] i915/skl_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load SUCCESS
>[16864.710106] [drm:intel_huc_init_hw [i915]] HuC DMA transfer wait over with ret 0
>[16864.710134] [drm:intel_huc_init_hw [i915]] i915/skl_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load SUCCESS
>[16864.710164] [drm:intel_guc_init_hw [i915]] GuC fw status: path i915/skl_guc_ver6_1.bin, fetch SUCCESS, load SUCCESS
>[16864.710186] [drm:intel_guc_init_hw [i915]] GuC fw status: fetch SUCCESS, load PENDING
>[16864.720468] [drm:guc_ucode_xfer_dma.isra.1 [i915]] DMA status 0x10, GuC status 0x8002f0ec
>[16864.720493] [drm:guc_ucode_xfer_dma.isra.1 [i915]] returning 0
>[16864.720494] [drm] GuC submission enabled (firmware i915/skl_guc_ver6_1.bin [version 6.1])
>[16864.732840] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[16864.732922] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x0
>[16864.732939] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: disabled
>[16864.732955] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0
>[16864.732970] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled
>[16864.732985] [drm:intel_set_plane_visible [i915]] pipe C active planes 0x0
>[16864.732999] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:46:pipe C] hw state readout: disabled
>[16864.733013] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1
>[16864.733027] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[16864.733039] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[16864.733052] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[16864.733065] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:47:DDI A] hw state readout: disabled, pipe A
>[16864.733078] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:48:eDP-1] hw state readout: disabled
>[16864.733094] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state]
>[16864.733107] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0
>[16864.733120] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[16864.733132] [drm:intel_dump_pipe_config [i915]] requested mode:
>[16864.733147] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[16864.733158] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[16864.733161] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[16864.733173] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[16864.733185] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[16864.733196] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[16864.733208] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[16864.733219] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[16864.733234] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[16864.733245] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[16864.733257] [drm:intel_dump_pipe_config [i915]] [PLANE:26:plane 1A] disabled, scaler_id = -1
>[16864.733269] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 2A] disabled, scaler_id = -1
>[16864.733280] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = -1
>[16864.733293] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state]
>[16864.733304] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[16864.733315] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[16864.733325] [drm:intel_dump_pipe_config [i915]] requested mode:
>[16864.733327] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[16864.733338] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[16864.733340] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[16864.733351] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[16864.733362] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[16864.733373] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[16864.733384] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[16864.733395] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[16864.733409] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[16864.733420] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[16864.733431] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 1B] disabled, scaler_id = -1
>[16864.733442] [drm:intel_dump_pipe_config [i915]] [PLANE:35:plane 2B] disabled, scaler_id = -1
>[16864.733453] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = -1
>[16864.733465] [drm:intel_dump_pipe_config [i915]] [CRTC:46:pipe C][setup_hw_state]
>[16864.733476] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[16864.733486] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[16864.733497] [drm:intel_dump_pipe_config [i915]] requested mode:
>[16864.733499] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[16864.733509] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[16864.733511] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[16864.733522] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[16864.733533] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[16864.733544] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[16864.733555] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[16864.733565] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[16864.733579] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[16864.733590] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[16864.733601] [drm:intel_dump_pipe_config [i915]] [PLANE:40:plane 1C] disabled, scaler_id = -1
>[16864.733612] [drm:intel_dump_pipe_config [i915]] [PLANE:42:plane 2C] disabled, scaler_id = -1
>[16864.733622] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor C] disabled, scaler_id = -1
>[16864.733636] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling
>[16864.733712] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:48:eDP-1] checking for sink bpp constrains
>[16864.733725] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to EDID reported max of 18
>[16864.733741] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz
>[16864.733755] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[16864.733768] [drm:intel_dp_compute_config [i915]] DP link bw required 312075 available 540000
>[16864.733782] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[16864.733795] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[16864.733806] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
>[16864.733818] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64
>[16864.733829] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[16864.733840] [drm:intel_dump_pipe_config [i915]] requested mode:
>[16864.733843] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[16864.733853] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[16864.733855] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
>[16864.733867] [drm:intel_dump_pipe_config [i915]] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9
>[16864.733878] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 138700
>[16864.733888] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[16864.733899] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[16864.733910] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[16864.733924] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[16864.733935] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[16864.733946] [drm:intel_dump_pipe_config [i915]] [PLANE:26:plane 1A] disabled, scaler_id = -1
>[16864.733956] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 2A] disabled, scaler_id = -1
>[16864.733967] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = -1
>[16864.733981] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
>[16864.733998] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated DPLL 0
>[16864.734011] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
>[16864.734023] [drm:skl_update_scaler [i915]] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0
>[16864.734034] [drm:skl_update_scaler [i915]] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0
>[16864.734064] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DDI A]
>[16864.734075] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 0
>[16864.734087] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 1
>[16864.734098] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 2
>[16864.734109] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 3
>[16864.734125] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 32
>[16864.734143] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
>[16864.734175] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[16864.734195] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[16864.734304] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
>[16864.734322] [drm:wait_panel_status [i915]] Wait complete
>[16864.734354] [drm:edp_panel_on [i915]] Wait for panel power on
>[16864.734417] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003
>[16864.763543] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout
>[16864.934551] [drm:wait_panel_status [i915]] Wait complete
>[16864.934596] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[16864.934669] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
>[16864.935784] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[16864.935796] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[16864.935807] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[16864.935832] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[16864.936454] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
>[16864.936464] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
>[16864.936487] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[16864.937128] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000
>[16864.937141] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
>[16864.937150] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[16864.937758] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000
>[16864.937768] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3
>[16864.937791] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[16864.938405] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached
>[16864.938415] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
>[16864.939354] [drm:intel_dp_dump_link_status [i915]] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0x33 adj_req2_3:0x0
>[16864.939364] [drm:intel_dp_start_link_train [i915]] Clock recovery check failed, cannot continue channel equalization
>[16864.939626] [drm:intel_enable_pipe [i915]] enabling pipe A
>[16864.939650] [drm:intel_edp_backlight_on.part.21 [i915]] 
>[16864.939661] [drm:intel_panel_enable_backlight [i915]] pipe A
>[16864.939726] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 416
>[16864.939773] [drm:intel_psr_enable [i915]] PSR disable by flag
>[16864.939783] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
>[16864.939796] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[16864.939806] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[16864.956358] [drm:verify_connector_state.isra.48 [i915]] [CONNECTOR:48:eDP-1]
>[16864.956370] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[16864.956388] [drm:verify_single_dpll_state.isra.74 [i915]] DPLL 0
>[16864.956399] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe B]
>[16864.956410] [drm:intel_atomic_commit_tail [i915]] [CRTC:46:pipe C]
>[16864.956479] [drm:intel_opregion_register [i915]] 1 outputs detected
>[16864.956491] [drm:intel_dp_detect [i915]] [CONNECTOR:48:eDP-1]
>[16864.956501] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
>[16864.956511] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[16864.956520] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[16864.956529] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[16864.957235] [drm:drm_dp_read_desc] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[16864.957587] [drm:intel_dp_check_link_status [i915]] DDI A: channel EQ not ok, retraining
>[16864.958736] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[16864.958746] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[16864.958755] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[16864.958765] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[16864.959395] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
>[16864.959404] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
>[16864.959413] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[16864.960026] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000
>[16864.960035] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
>[16864.960044] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[16864.960652] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000
>[16864.960661] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3
>[16864.960670] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[16864.961277] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached
>[16864.961287] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
>[16864.962210] [drm:intel_dp_dump_link_status [i915]] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0x33 adj_req2_3:0x0
>[16864.962219] [drm:intel_dp_start_link_train [i915]] Clock recovery check failed, cannot continue channel equalization
>[16864.973305] [drm:drm_helper_hpd_irq_event] [CONNECTOR:48:eDP-1] status updated from connected to connected
>[16864.978413] PM: resume of devices complete after 279.012 msecs
>[16865.015369] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[16865.015387] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[16865.015642] ata1.00: supports DRM functions and may not be fully accessible
>[16865.017642] ata1.00: disabling queued TRIM support
>[16865.018105] ata1.00: supports DRM functions and may not be fully accessible
>[16865.018696] ata1.00: disabling queued TRIM support
>[16865.018878] ata1.00: configured for UDMA/133
>[16865.024412] ata2.00: configured for UDMA/133
>[16865.024415] ahci 0000:00:17.0: port does not support device sleep
>[16865.028969] ahci 0000:00:17.0: port does not support device sleep
>[16865.047896] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
>[16865.047910] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[16865.047922] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[16865.047986] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[16865.065462] PM: Finishing wakeup.
>[16865.065463] OOM killer enabled.
>[16865.066042] Restarting tasks ... 
>[16865.066110] usb 1-7: USB disconnect, device number 3
>[16865.068936] done.
>[16865.070099] thermal thermal_zone3: failed to read out thermal zone (-5)
>[16865.074537] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
>[16865.089668] [drm:drm_mode_setcrtc] [CRTC:32:pipe A]
>[16865.089673] [drm:drm_mode_setcrtc] [CONNECTOR:48:eDP-1]
>[16865.106306] r8169 0000:02:00.1 enp2s0f1: link down
>[16865.106331] r8169 0000:02:00.1 enp2s0f1: link down
>[16865.106382] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
>[16865.107082] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[16865.109186] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[16865.109839] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[16865.152625] [drm] RC6 on
>[16865.266153] usb 1-7: new full-speed USB device number 6 using xhci_hcd
>[16865.334168] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[16865.334494] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[16865.371140] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[16865.371699] ata4.00: supports DRM functions and may not be fully accessible
>[16865.383864] ata4.00: supports DRM functions and may not be fully accessible
>[16865.395763] ata4.00: configured for UDMA/133
>[16865.405824] ahci 0000:00:17.0: port does not support device sleep
>[16865.436154] usb 1-7: New USB device found, idVendor=1c7a, idProduct=0603
>[16865.436156] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[16865.436157] usb 1-7: Product: EgisTec_ES603
>[16865.436158] usb 1-7: Manufacturer: EgisTec
>[16865.436882] usb 1-8: USB disconnect, device number 4
>[16865.463179] ata4.00: Enabling discard_zeroes_data
>[16865.466469] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[16865.477689] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[16865.593188] usb 1-8: new full-speed USB device number 7 using xhci_hcd
>[16865.632180] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[16865.632854] ata3.00: configured for UDMA/133
>[16865.762295] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b
>[16865.762297] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[16865.763041] usb 1-9: USB disconnect, device number 5
>[16865.763665] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
>[16865.768695] Bluetooth: hci0: Device revision is 5
>[16865.768697] Bluetooth: hci0: Secure boot is enabled
>[16865.768698] Bluetooth: hci0: OTP lock is enabled
>[16865.768699] Bluetooth: hci0: API lock is enabled
>[16865.768700] Bluetooth: hci0: Debug lock is disabled
>[16865.768701] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
>[16865.768703] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
>[16865.818905] psmouse serio2: synaptics: queried max coordinates: x [..5654], y [..4716]
>[16865.934898] psmouse serio2: synaptics: queried min coordinates: x [1326..], y [1228..]
>[16866.690738] r8169 0000:02:00.1 enp2s0f1: link up
>[16866.690748] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f1: link becomes ready
>[16866.994184] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[16866.994233] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[16867.186979] Bluetooth: hci0: Waiting for firmware download to complete
>[16867.187677] Bluetooth: hci0: Firmware loaded in 1391286 usecs
>[16867.187772] Bluetooth: hci0: Waiting for device to boot
>[16867.198724] Bluetooth: hci0: Device booted in 10784 usecs
>[16867.198729] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
>[16867.202745] Bluetooth: hci0: Applying Intel DDC parameters completed
>[16868.551105] wlp3s0: authenticate with d8:fb:5e:f7:0d:48
>[16868.559088] wlp3s0: send auth to d8:fb:5e:f7:0d:48 (try 1/3)
>[16868.573558] wlp3s0: authenticated
>[16868.574209] wlp3s0: associate with d8:fb:5e:f7:0d:48 (try 1/3)
>[16868.578423] wlp3s0: RX AssocResp from d8:fb:5e:f7:0d:48 (capab=0x1411 status=0 aid=1)
>[16868.582938] wlp3s0: associated
>[16868.582964] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[16874.136618] [drm:drm_mode_setcrtc] [CRTC:32:pipe A]
>[16874.136632] [drm:drm_mode_setcrtc] [CONNECTOR:48:eDP-1]
>[16874.653142] [drm:drm_mode_setcrtc] [CRTC:32:pipe A]
>[16874.653151] [drm:drm_mode_setcrtc] [CONNECTOR:48:eDP-1]
>[16883.609137] wlp3s0: deauthenticating from d8:fb:5e:f7:0d:48 by local choice (Reason: 3=DEAUTH_LEAVING)
>[16883.637451] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[16883.638100] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[16883.776692] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[16883.776994] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
>[16883.872314] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

Actions: View

Attachments on bug 98517: 127644 | 127645 | 127780 | 127781 | 128573 | 128574 | 131523 | 132784

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.