[10085.452876] [drm:drm_atomic_state_init] Allocated atomic state ffff94df2f25c400
[10085.452886] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94dd5c995180 state to ffff94df2f25c400
[10085.452894] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94df2f364800 state to ffff94df2f25c400
[10085.452899] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff94dd5c995180 to [CRTC:31:pipe A]
[10085.452903] [drm:drm_atomic_set_fb_for_plane] Set [FB:59] for plane state ffff94dd5c995180
[10085.452907] [drm:drm_atomic_check_only] checking ffff94df2f25c400
[10085.452989] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10085.453058] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 0 -> 1, off 0, on 1, ms 0
[10085.453078] [drm:drm_atomic_commit] commiting ffff94df2f25c400
[10085.453129] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94df2f25c400
[10085.453137] [drm:__drm_atomic_state_free] Freeing atomic state ffff94df2f25c400
[10085.472603] wlp3s0: deauthenticating from 5c:96:9d:69:df:c3 by local choice (Reason: 3=DEAUTH_LEAVING)
[10085.482768] iwlwifi 0000:03:00.0: Failed to find station
[10085.482773] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[10085.482841] iwlwifi 0000:03:00.0: Failed to find station
[10085.482846] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[10085.491188] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10085.491850] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10085.600749] [drm:drm_atomic_set_fb_for_plane] Set [FB:59] for plane state ffff94dd52079780
[10085.600783] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10085.600809] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 1, off 0, on 0, ms 0
[10085.630914] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10085.631206] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10085.722202] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10085.748861] PM: Syncing filesystems ... done.
[10085.764612] PM: Preparing system for sleep (mem)
[10085.765456] bbswitch: enabling discrete graphics
[10085.913615] Freezing user space processes ... (elapsed 0.001 seconds) done.
[10085.915472] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10085.916821] PM: Suspending system (mem)
[10085.916836] Suspending console(s) (use no_console_suspend to debug)
[10085.917290] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
[10085.917297] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[10085.917301] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[10085.917995] sd 2:0:0:0: [sdc] Stopping disk
[10085.922371] sd 1:0:0:0: [sdb] Stopping disk
[10085.925042] sd 3:0:0:0: [sdd] Stopping disk
[10085.956774] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10086.503972] sd 0:0:0:0: [sda] Stopping disk
[10086.504235] ACPI : EC: event blocked
[10086.504293] [drm:intel_power_well_enable [i915]] enabling DC off
[10086.504318] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[10086.504351] [drm:intel_power_well_enable [i915]] enabling power well 2
[10086.504378] [drm:skl_set_power_well [i915]] Enabling power well 2
[10086.504405] [drm:intel_power_well_enable [i915]] enabling DDI B power well
[10086.504422] [drm:skl_set_power_well [i915]] Enabling DDI B power well
[10086.504439] [drm:intel_power_well_enable [i915]] enabling DDI C power well
[10086.504456] [drm:skl_set_power_well [i915]] Enabling DDI C power well
[10086.504472] [drm:intel_power_well_enable [i915]] enabling DDI D power well
[10086.504489] [drm:skl_set_power_well [i915]] Enabling DDI D power well
[10086.506705] [drm:drm_atomic_state_init] Allocated atomic state ffff94df2fc7a800
[10086.506710] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94df2f362800 state to ffff94df2fc7a800
[10086.506712] [drm:drm_atomic_get_crtc_state] Added [CRTC:38:pipe B] ffff94df2f360000 state to ffff94df2fc7a800
[10086.506714] [drm:drm_atomic_get_crtc_state] Added [CRTC:45:pipe C] ffff94df2f362000 state to ffff94df2fc7a800
[10086.506717] [drm:drm_atomic_get_plane_state] Added [PLANE:25:plane 1A] ffff94dd5c9956c0 state to ffff94df2fc7a800
[10086.506719] [drm:drm_atomic_get_plane_state] Added [PLANE:27:plane 2A] ffff94dd5c995540 state to ffff94df2fc7a800
[10086.506721] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94dd5c995480 state to ffff94df2fc7a800
[10086.506723] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane 1B] ffff94dd5c995b40 state to ffff94df2fc7a800
[10086.506725] [drm:drm_atomic_get_plane_state] Added [PLANE:34:plane 2B] ffff94dd5c995300 state to ffff94df2fc7a800
[10086.506726] [drm:drm_atomic_get_plane_state] Added [PLANE:36:cursor B] ffff94dd5c995e40 state to ffff94df2fc7a800
[10086.506728] [drm:drm_atomic_get_plane_state] Added [PLANE:39:plane 1C] ffff94dd5c995240 state to ffff94df2fc7a800
[10086.506730] [drm:drm_atomic_get_plane_state] Added [PLANE:41:plane 2C] ffff94dd5c9959c0 state to ffff94df2fc7a800
[10086.506732] [drm:drm_atomic_get_plane_state] Added [PLANE:43:cursor C] ffff94dd5c995000 state to ffff94df2fc7a800
[10086.506735] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:47] ffff94dea519f240 state to ffff94df2fc7a800
[10086.506737] [drm:drm_atomic_state_init] Allocated atomic state ffff94df31951800
[10086.506739] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94df2f367800 state to ffff94df31951800
[10086.506741] [drm:drm_atomic_check_only] checking ffff94df31951800
[10086.506743] [drm:drm_atomic_helper_check_modeset] [CRTC:31:pipe A] active changed
[10086.506745] [drm:drm_atomic_helper_check_modeset] [CRTC:31:pipe A] needs all connectors, enable: y, active: n
[10086.506747] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:31:pipe A] to ffff94df31951800
[10086.506749] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:47] ffff94dea519f600 state to ffff94df31951800
[10086.506751] [drm:drm_atomic_get_plane_state] Added [PLANE:25:plane 1A] ffff94dd5c995f00 state to ffff94df31951800
[10086.506753] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94dd5c995840 state to ffff94df31951800
[10086.506755] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:31:pipe A] to ffff94df31951800
[10086.506786] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:47:eDP-1] checking for sink bpp constrains
[10086.506812] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to EDID reported max of 18
[10086.506842] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz
[10086.506868] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
[10086.506892] [drm:intel_dp_compute_config [i915]] DP link bw required 312075 available 540000
[10086.506918] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
[10086.506945] [drm:intel_dump_pipe_config [i915]] [CRTC:31:pipe A][modeset]
[10086.506968] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
[10086.506991] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64
[10086.507013] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[10086.507034] [drm:intel_dump_pipe_config [i915]] requested mode:
[10086.507038] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x0 0x9
[10086.507058] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[10086.507062] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
[10086.507083] [drm:intel_dump_pipe_config [i915]] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9
[10086.507103] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
[10086.507123] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[10086.507143] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[10086.507174] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[10086.507200] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
[10086.507220] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[10086.507241] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:62, fb = 1920x1080 format = XR24 little-endian (0x34325258)
[10086.507261] [drm:intel_dump_pipe_config [i915]]      scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
[10086.507280] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
[10086.507300] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor A] FB:59, fb = 64x64 format = AR24 little-endian (0x34325241)
[10086.507320] [drm:intel_dump_pipe_config [i915]]      scaler:-1 src 0x0+64+64 dst 1030x602+64+64
[10086.507345] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500
[10086.507373] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:25:plane 1A] with fb 62
[10086.507396] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:25:plane 1A] visible 1 -> 0, off 1, on 0, ms 1
[10086.507419] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10086.507441] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 0, off 1, on 0, ms 1
[10086.507467] [drm:intel_find_shared_dpll [i915]] [CRTC:31:pipe A] allocated DPLL 0
[10086.507490] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[10086.507495] [drm:drm_atomic_get_crtc_state] Added [CRTC:38:pipe B] ffff94df2f365800 state to ffff94df31951800
[10086.507497] [drm:drm_atomic_get_crtc_state] Added [CRTC:45:pipe C] ffff94df2f360800 state to ffff94df31951800
[10086.507518] [drm:skl_compute_wm [i915]] [PLANE:25:plane 1A] ddb (0 - 860) -> (0 - 0)
[10086.507536] [drm:skl_compute_wm [i915]] [PLANE:29:cursor A] ddb (860 - 892) -> (0 - 0)
[10086.507538] [drm:drm_atomic_commit] commiting ffff94df31951800
[10086.507579] [drm:intel_edp_backlight_off.part.24 [i915]] 
[10087.766333] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[10087.766432] [drm:intel_disable_pipe [i915]] disabling pipe A
[10087.776884] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[10087.776981] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
[10087.777234] [drm:edp_panel_off [i915]] Turn eDP port A panel power off
[10087.777303] [drm:edp_panel_off [i915]] Wait for panel power off time
[10087.777400] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000
[10087.828015] [drm:wait_panel_status [i915]] Wait complete
[10087.828079] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 31
[10087.828130] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[10087.828234] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:DDI A]
[10087.828285] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[10087.828331] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[10087.828376] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[10087.828418] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[10087.828466] [drm:verify_connector_state.isra.54 [i915]] [CONNECTOR:47:eDP-1]
[10087.828516] [drm:intel_atomic_commit_tail [i915]] [CRTC:31:pipe A]
[10087.828560] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[10087.828578] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94df31951800
[10087.828586] [drm:__drm_atomic_state_free] Freeing atomic state ffff94df31951800
[10087.833355] PM: suspend of devices complete after 1916.356 msecs
[10087.833827] [drm:intel_power_well_disable [i915]] disabling DDI D power well
[10087.833853] [drm:skl_set_power_well [i915]] Disabling DDI D power well
[10087.833877] [drm:intel_power_well_disable [i915]] disabling DDI C power well
[10087.833900] [drm:skl_set_power_well [i915]] Disabling DDI C power well
[10087.833922] [drm:intel_power_well_disable [i915]] disabling DDI B power well
[10087.833945] [drm:skl_set_power_well [i915]] Disabling DDI B power well
[10087.833967] [drm:intel_power_well_disable [i915]] disabling DDI A/E power well
[10087.833989] [drm:skl_set_power_well [i915]] Disabling DDI A/E power well
[10087.834011] [drm:intel_power_well_disable [i915]] disabling power well 2
[10087.834038] [drm:skl_set_power_well [i915]] Disabling power well 2
[10087.834060] [drm:intel_power_well_disable [i915]] disabling DC off
[10087.834083] [drm:skl_enable_dc6 [i915]] Enabling DC6
[10087.834105] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[10087.834128] [drm:intel_power_well_disable [i915]] disabling always-on
[10087.834539] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[10087.834586] [drm:skl_set_cdclk [i915]] Changing CDCLK to 24000 kHz (VCO 0 kHz)
[10087.836761] [drm:intel_update_cdclk [i915]] Current CD clock rate: 24000 kHz, VCO: 0 kHz, ref: 24000 kHz
[10087.836787] [drm:intel_power_well_disable [i915]] disabling MISC IO power well
[10087.836815] [drm:skl_set_power_well [i915]] Disabling MISC IO power well
[10087.836840] [drm:skl_set_power_well [i915]] Clearing auxiliary requests for MISC IO power well forced on by DMC
[10087.836865] [drm:intel_power_well_disable [i915]] disabling power well 1
[10087.836892] [drm:skl_set_power_well [i915]] Clearing auxiliary requests for power well 1 forced on by DMC
[10087.848304] PM: late suspend of devices complete after 14.943 msecs
[10087.849102] ACPI : EC: interrupt blocked
[10087.850075] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[10087.861760] PM: noirq suspend of devices complete after 13.451 msecs
[10087.862586] ACPI: Preparing to enter system sleep state S3
[10087.864456] ACPI : EC: EC stopped
[10087.864457] PM: Saving platform NVS memory
[10087.864470] Disabling non-boot CPUs ...
[10087.866317] smpboot: CPU 1 is now offline
[10087.875514] smpboot: CPU 2 is now offline
[10087.888583] smpboot: CPU 3 is now offline
[10087.900981] smpboot: CPU 4 is now offline
[10087.917152] smpboot: CPU 5 is now offline
[10087.933729] smpboot: CPU 6 is now offline
[10087.949668] smpboot: CPU 7 is now offline
[10087.960067] ACPI: Low-level resume complete
[10087.960145] ACPI : EC: EC started
[10087.960146] PM: Restoring platform NVS memory
[10087.960963] Suspended for 8.780 seconds
[10087.961007] Enabling non-boot CPUs ...
[10087.964053] x86: Booting SMP configuration:
[10087.964053] smpboot: Booting Node 0 Processor 1 APIC 0x2
[10087.964555]  cache: parent cpu1 should not be sleeping
[10087.964789] CPU1 is up
[10087.970292] smpboot: Booting Node 0 Processor 2 APIC 0x4
[10087.971102]  cache: parent cpu2 should not be sleeping
[10087.971362] CPU2 is up
[10087.978304] smpboot: Booting Node 0 Processor 3 APIC 0x6
[10087.979217]  cache: parent cpu3 should not be sleeping
[10087.979492] CPU3 is up
[10087.989367] smpboot: Booting Node 0 Processor 4 APIC 0x1
[10087.990286]  cache: parent cpu4 should not be sleeping
[10087.990571] CPU4 is up
[10088.001489] smpboot: Booting Node 0 Processor 5 APIC 0x3
[10088.002513]  cache: parent cpu5 should not be sleeping
[10088.002843] CPU5 is up
[10088.013539] smpboot: Booting Node 0 Processor 6 APIC 0x5
[10088.014363]  cache: parent cpu6 should not be sleeping
[10088.014697] CPU6 is up
[10088.025639] smpboot: Booting Node 0 Processor 7 APIC 0x7
[10088.026491]  cache: parent cpu7 should not be sleeping
[10088.026907] CPU7 is up
[10088.038611] ACPI: Waking up from system sleep state S3
[10088.045587] ACPI : EC: interrupt unblocked
[10088.046077] pcieport 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
[10088.046078] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[10088.058330] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[10088.058701] PM: noirq resume of devices complete after 13.252 msecs
[10088.058760] DMAR: DRHD: handling fault status reg 3
[10088.058763] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0 [fault reason 37] Blocked a compatibility format interrupt request
[10088.059032] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[10088.059054] [drm:intel_power_well_enable [i915]] enabling power well 1
[10088.059076] [drm:intel_power_well_enable [i915]] enabling MISC IO power well
[10088.059106] [drm:skl_init_cdclk [i915]] Sanitizing cdclk programmed by pre-os
[10088.059133] [drm:skl_set_cdclk [i915]] Changing CDCLK to 337500 kHz (VCO 8100000 kHz)
[10088.060847] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz
[10088.061334] [drm:intel_power_well_enable [i915]] enabling always-on
[10088.061353] [drm:intel_power_well_enable [i915]] enabling DC off
[10088.061372] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[10088.061392] [drm:intel_power_well_enable [i915]] enabling power well 2
[10088.061411] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well
[10088.061428] [drm:skl_set_power_well [i915]] Enabling DDI A/E power well
[10088.061446] [drm:intel_power_well_enable [i915]] enabling DDI B power well
[10088.061464] [drm:skl_set_power_well [i915]] Enabling DDI B power well
[10088.061482] [drm:intel_power_well_enable [i915]] enabling DDI C power well
[10088.061500] [drm:skl_set_power_well [i915]] Enabling DDI C power well
[10088.061517] [drm:intel_power_well_enable [i915]] enabling DDI D power well
[10088.061535] [drm:skl_set_power_well [i915]] Enabling DDI D power well
[10088.061553] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[10088.061634] PM: early resume of devices complete after 2.878 msecs
[10088.061731] ACPI : EC: event unblocked
[10088.061801] ACPI : button: The lid device is not compliant to SW_LID.
[10088.062353] rtc_cmos 00:02: System wakeup disabled by ACPI
[10088.062382] sd 0:0:0:0: [sda] Starting disk
[10088.062385] sd 3:0:0:0: [sdd] Starting disk
[10088.062387] sd 1:0:0:0: [sdb] Starting disk
[10088.062390] sd 2:0:0:0: [sdc] Starting disk
[10088.064143] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x5fb95018
[10088.064213] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
[10088.064240] [drm:intel_opregion_setup [i915]] SWSCI supported
[10088.069966] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
[10088.069992] [drm:intel_opregion_setup [i915]] ASLE supported
[10088.070016] [drm:intel_opregion_setup [i915]] ASLE extension supported
[10088.070039] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
[10088.070258] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af04
[10088.070566] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring
[10088.070654] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring
[10088.070726] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring
[10088.070814] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring
[10088.070883] [drm:intel_guc_setup [i915]] GuC fw status: path i915/skl_guc_ver6_1.bin, fetch NONE, load NONE
[10088.070890] [drm] GuC firmware load skipped
[10088.070920] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz
[10088.071008] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:31:pipe A] hw state readout: disabled
[10088.071034] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:38:pipe B] hw state readout: disabled
[10088.071060] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:45:pipe C] hw state readout: disabled
[10088.071083] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1
[10088.071105] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[10088.071126] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[10088.071147] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
[10088.071169] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:46:DDI A] hw state readout: disabled, pipe A
[10088.071190] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:47:eDP-1] hw state readout: disabled
[10088.071216] [drm:intel_dump_pipe_config [i915]] [CRTC:31:pipe A][setup_hw_state]
[10088.071239] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0
[10088.071262] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[10088.071283] [drm:intel_dump_pipe_config [i915]] requested mode:
[10088.071288] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[10088.071309] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[10088.071312] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[10088.071333] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[10088.071353] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
[10088.071372] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
[10088.071392] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[10088.071411] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[10088.071437] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
[10088.071458] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[10088.071480] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:62, fb = 1920x1080 format = XR24 little-endian (0x34325258)
[10088.071500] [drm:intel_dump_pipe_config [i915]]      scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
[10088.071520] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
[10088.071540] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor A] FB:59, fb = 64x64 format = AR24 little-endian (0x34325241)
[10088.071560] [drm:intel_dump_pipe_config [i915]]      scaler:-1 src 0x0+64+64 dst 1030x602+64+64
[10088.071580] [drm:intel_dump_pipe_config [i915]] [CRTC:38:pipe B][setup_hw_state]
[10088.071599] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
[10088.071618] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[10088.071636] [drm:intel_dump_pipe_config [i915]] requested mode:
[10088.071640] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[10088.071658] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[10088.071661] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[10088.071680] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[10088.071699] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
[10088.071717] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
[10088.071737] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[10088.071769] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[10088.071794] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
[10088.071814] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[10088.071833] [drm:intel_dump_pipe_config [i915]] [PLANE:32:plane 1B] disabled, scaler_id = -1
[10088.071851] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 2B] disabled, scaler_id = -1
[10088.071870] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor B] disabled, scaler_id = -1
[10088.071889] [drm:intel_dump_pipe_config [i915]] [CRTC:45:pipe C][setup_hw_state]
[10088.071907] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
[10088.071925] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[10088.071943] [drm:intel_dump_pipe_config [i915]] requested mode:
[10088.071946] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[10088.071963] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[10088.071966] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[10088.071985] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[10088.072003] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
[10088.072023] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
[10088.072041] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[10088.072059] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[10088.072084] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
[10088.072104] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[10088.072123] [drm:intel_dump_pipe_config [i915]] [PLANE:39:plane 1C] disabled, scaler_id = -1
[10088.072141] [drm:intel_dump_pipe_config [i915]] [PLANE:41:plane 2C] disabled, scaler_id = -1
[10088.072160] [drm:intel_dump_pipe_config [i915]] [PLANE:43:cursor C] disabled, scaler_id = -1
[10088.072185] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling
[10088.072233] [drm:intel_power_well_disable [i915]] disabling DDI D power well
[10088.072252] [drm:skl_set_power_well [i915]] Disabling DDI D power well
[10088.072272] [drm:intel_power_well_disable [i915]] disabling DDI C power well
[10088.072290] [drm:skl_set_power_well [i915]] Disabling DDI C power well
[10088.072309] [drm:intel_power_well_disable [i915]] disabling DDI B power well
[10088.072328] [drm:skl_set_power_well [i915]] Disabling DDI B power well
[10088.072346] [drm:intel_power_well_disable [i915]] disabling DDI A/E power well
[10088.072364] [drm:skl_set_power_well [i915]] Disabling DDI A/E power well
[10088.072369] [drm:drm_atomic_check_only] checking ffff94df2fc7a800
[10088.072373] [drm:drm_atomic_helper_check_modeset] [CRTC:31:pipe A] mode changed
[10088.072374] [drm:drm_atomic_helper_check_modeset] [CRTC:31:pipe A] enable changed
[10088.072378] [drm:drm_atomic_helper_check_modeset] Updating routing for [CONNECTOR:47:eDP-1]
[10088.072380] [drm:drm_atomic_helper_check_modeset] [CONNECTOR:47:eDP-1] keeps [ENCODER:46:DDI A], now on [CRTC:31:pipe A]
[10088.072381] [drm:drm_atomic_helper_check_modeset] [CRTC:31:pipe A] active changed
[10088.072383] [drm:drm_atomic_helper_check_modeset] [CRTC:31:pipe A] needs all connectors, enable: y, active: y
[10088.072385] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:31:pipe A] to ffff94df2fc7a800
[10088.072387] [drm:drm_atomic_helper_check_modeset] [CRTC:38:pipe B] needs all connectors, enable: n, active: n
[10088.072389] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:38:pipe B] to ffff94df2fc7a800
[10088.072391] [drm:drm_atomic_helper_check_modeset] [CRTC:45:pipe C] needs all connectors, enable: n, active: n
[10088.072392] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:45:pipe C] to ffff94df2fc7a800
[10088.072395] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:31:pipe A] to ffff94df2fc7a800
[10088.072421] [drm:intel_modeset_pipe_config [i915]] [CONNECTOR:47:eDP-1] checking for sink bpp constrains
[10088.072445] [drm:intel_modeset_pipe_config [i915]] clamping display bpp (was 36) to EDID reported max of 18
[10088.072474] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz
[10088.072499] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
[10088.072523] [drm:intel_dp_compute_config [i915]] DP link bw required 312075 available 540000
[10088.072548] [drm:intel_modeset_pipe_config [i915]] hw max bpp: 36, pipe bpp: 18, dithering: 1
[10088.072573] [drm:intel_dump_pipe_config [i915]] [CRTC:31:pipe A][modeset]
[10088.072595] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
[10088.072618] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64
[10088.072638] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[10088.072658] [drm:intel_dump_pipe_config [i915]] requested mode:
[10088.072662] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x0 0x9
[10088.072682] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[10088.072685] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
[10088.072706] [drm:intel_dump_pipe_config [i915]] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9
[10088.072726] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
[10088.072746] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[10088.072772] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[10088.072791] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[10088.072818] [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
[10088.072840] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[10088.072861] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:62, fb = 1920x1080 format = XR24 little-endian (0x34325258)
[10088.072880] [drm:intel_dump_pipe_config [i915]]      scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
[10088.072899] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
[10088.072918] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor A] FB:59, fb = 64x64 format = AR24 little-endian (0x34325241)
[10088.072937] [drm:intel_dump_pipe_config [i915]]      scaler:-1 src 0x0+64+64 dst 1030x602+64+64
[10088.072963] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500
[10088.072990] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:25:plane 1A] with fb 62
[10088.073013] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:25:plane 1A] visible 0 -> 1, off 0, on 1, ms 1
[10088.073036] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10088.073058] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 0 -> 1, off 0, on 1, ms 1
[10088.073084] [drm:intel_find_shared_dpll [i915]] [CRTC:31:pipe A] allocated DPLL 0
[10088.073108] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[10088.073132] [drm:skl_compute_wm [i915]] [PLANE:25:plane 1A] ddb (0 - 0) -> (0 - 860)
[10088.073150] [drm:skl_compute_wm [i915]] [PLANE:29:cursor A] ddb (0 - 0) -> (860 - 892)
[10088.073153] [drm:drm_atomic_commit] commiting ffff94df2fc7a800
[10088.073184] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well
[10088.073203] [drm:skl_set_power_well [i915]] Enabling DDI A/E power well
[10088.073230] [drm:intel_atomic_commit_tail [i915]] [ENCODER:46:DDI A]
[10088.073253] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[10088.073276] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[10088.073301] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[10088.073322] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[10088.073349] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 31
[10088.073372] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[10088.073407] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
[10088.073437] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[10088.073517] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
[10088.073546] [drm:wait_panel_status [i915]] Wait complete
[10088.073590] [drm:edp_panel_on [i915]] Wait for panel power on
[10088.073663] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003
[10088.074376] r8169 0000:02:00.1 enp2s0f1: link down
[10088.075341] [drm:intel_power_well_disable [i915]] disabling power well 2
[10088.075369] [drm:skl_set_power_well [i915]] Disabling power well 2
[10088.206043] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout
[10088.274160] [drm:wait_panel_status [i915]] Wait complete
[10088.274210] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[10088.274285] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
[10088.275406] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[10088.275431] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[10088.275456] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10088.275479] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[10088.276135] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
[10088.276158] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
[10088.276180] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10088.276817] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000
[10088.276840] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[10088.276861] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10088.277504] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000
[10088.277525] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3
[10088.277547] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10088.278177] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached
[10088.278199] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
[10088.279145] [drm:intel_dp_dump_link_status [i915]] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0x33 adj_req2_3:0x0
[10088.279168] [drm:intel_dp_start_link_train [i915]] Clock recovery check failed, cannot continue channel equalization
[10088.279425] [drm:intel_enable_pipe [i915]] enabling pipe A
[10088.279469] [drm:intel_edp_backlight_on.part.23 [i915]] 
[10088.279495] [drm:intel_panel_enable_backlight [i915]] pipe A
[10088.279577] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 142
[10088.279645] [drm:intel_psr_enable [i915]] PSR disable by flag
[10088.279668] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
[10088.296192] [drm:verify_connector_state.isra.54 [i915]] [CONNECTOR:47:eDP-1]
[10088.296223] [drm:intel_atomic_commit_tail [i915]] [CRTC:31:pipe A]
[10088.296260] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[10088.296288] [drm:intel_atomic_commit_tail [i915]] [CRTC:38:pipe B]
[10088.296312] [drm:intel_atomic_commit_tail [i915]] [CRTC:45:pipe C]
[10088.296323] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94df2fc7a800
[10088.296329] [drm:__drm_atomic_state_free] Freeing atomic state ffff94df2fc7a800
[10088.296419] [drm:intel_opregion_register [i915]] 1 outputs detected
[10088.296451] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
[10088.296477] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
[10088.296505] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[10088.296530] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[10088.296554] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[10088.297466] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
[10088.297844] [drm:intel_dp_check_link_status [i915]] DDI A: channel EQ not ok, retraining
[10088.298804] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[10088.298827] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[10088.298849] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10088.298872] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[10088.299633] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 04000000
[10088.299655] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 1
[10088.299676] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10088.300320] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 07000000
[10088.300341] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[10088.300362] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10088.300991] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 09000000
[10088.301011] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 3
[10088.301033] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10088.301671] [drm:intel_dp_start_link_train [i915]] Max Voltage Swing reached
[10088.301693] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
[10088.302643] [drm:intel_dp_dump_link_status [i915]] ln0_1:0x0 ln2_3:0x0 align:0x80 sink:0x0 adj_req0_1:0x33 adj_req2_3:0x0
[10088.302665] [drm:intel_dp_start_link_train [i915]] Clock recovery check failed, cannot continue channel equalization
[10088.312814] [drm:drm_helper_hpd_irq_event] [CONNECTOR:47:eDP-1] status updated from connected to connected
[10088.375269] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10088.375482] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10088.375768] ata1.00: supports DRM functions and may not be fully accessible
[10088.377170] ata1.00: disabling queued TRIM support
[10088.377607] ata1.00: supports DRM functions and may not be fully accessible
[10088.378286] ata1.00: disabling queued TRIM support
[10088.378513] ata1.00: configured for UDMA/133
[10088.379679] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[10088.379708] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[10088.379734] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
[10088.379767] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[10088.384167] ata2.00: configured for UDMA/133
[10088.384176] ahci 0000:00:17.0: port does not support device sleep
[10088.388572] ahci 0000:00:17.0: port does not support device sleep
[10088.481994] usb 1-7: reset full-speed USB device number 2 using xhci_hcd
[10088.716784] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10088.717353] ata4.00: supports DRM functions and may not be fully accessible
[10088.729613] ata4.00: supports DRM functions and may not be fully accessible
[10088.741622] ata4.00: configured for UDMA/133
[10088.751716] ahci 0000:00:17.0: port does not support device sleep
[10088.770024] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
[10088.946769] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10088.947615] ata3.00: configured for UDMA/133
[10089.004845] ata4.00: Enabling discard_zeroes_data
[10089.050006] usb 1-8: reset full-speed USB device number 13 using xhci_hcd
[10089.154788] psmouse serio2: synaptics: queried max coordinates: x [..5654], y [..4716]
[10089.175251] PM: resume of devices complete after 1113.617 msecs
[10089.239845] usb 1-8:1.0: rebind failed: -517
[10089.239846] usb 1-8:1.1: rebind failed: -517
[10089.240198] PM: Finishing wakeup.
[10089.240199] Restarting tasks ... 
[10089.241473] [drm] RC6 on
[10089.241629] done.
[10089.241696] thermal thermal_zone2: failed to read out thermal zone (-5)
[10089.241817] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[10089.242353] bbswitch: disabling discrete graphics
[10089.242383] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[10089.246830] Bluetooth: hci0: Device revision is 5
[10089.246835] Bluetooth: hci0: Secure boot is enabled
[10089.246837] Bluetooth: hci0: OTP lock is enabled
[10089.246839] Bluetooth: hci0: API lock is enabled
[10089.246840] Bluetooth: hci0: Debug lock is disabled
[10089.246843] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[10089.246848] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[10089.270369] psmouse serio2: synaptics: queried min coordinates: x [1326..], y [1228..]
[10089.379540] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
[10089.402884] r8169 0000:02:00.1 enp2s0f1: link down
[10089.402947] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
[10089.403909] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10089.405833] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10089.406475] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10089.416318] Bluetooth: hci0: Failed to send firmware data (-38)
[10089.544178] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10089.544469] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10089.637728] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10089.644809] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10089.645472] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10089.783135] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10089.783418] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10089.876216] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10089.898574] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10090.329816] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[10090.329889] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
[10090.329916] [drm:intel_power_well_disable [i915]] disabling DC off
[10090.329943] [drm:skl_enable_dc6 [i915]] Enabling DC6
[10090.329967] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[10093.289789] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10093.290425] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10093.429471] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10093.429831] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[10093.524336] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10093.715614] [drm:drm_atomic_state_init] Allocated atomic state ffff94dd73828400
[10093.715619] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94de6208c840 state to ffff94dd73828400
[10093.715622] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94df2f7d6800 state to ffff94dd73828400
[10093.715624] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff94de6208c840 to [CRTC:31:pipe A]
[10093.715626] [drm:drm_atomic_set_fb_for_plane] Set [FB:59] for plane state ffff94de6208c840
[10093.715628] [drm:drm_atomic_check_only] checking ffff94dd73828400
[10093.715664] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10093.715690] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 1, off 0, on 0, ms 0
[10093.715699] [drm:drm_atomic_commit] commiting ffff94dd73828400
[10093.715742] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94dd73828400
[10093.715745] [drm:__drm_atomic_state_free] Freeing atomic state ffff94dd73828400
[10093.718459] [drm:drm_atomic_set_fb_for_plane] Set [FB:59] for plane state ffff94dd6df6bc00
[10093.718504] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10093.718542] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 1, off 0, on 0, ms 0
[10093.834186] [drm:drm_atomic_state_init] Allocated atomic state ffff94dd73828400
[10093.834195] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94de6208cf00 state to ffff94dd73828400
[10093.834203] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94df2f7d0800 state to ffff94dd73828400
[10093.834207] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff94de6208cf00 to [NOCRTC]
[10093.834211] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff94de6208cf00
[10093.834214] [drm:drm_atomic_check_only] checking ffff94dd73828400
[10093.834284] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb -1
[10093.834335] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 0, off 1, on 0, ms 0
[10093.834348] [drm:drm_atomic_commit] commiting ffff94dd73828400
[10093.834396] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94dd73828400
[10093.834400] [drm:__drm_atomic_state_free] Freeing atomic state ffff94dd73828400
[10094.114380] [drm:drm_atomic_state_init] Allocated atomic state ffff94dd73828400
[10094.114385] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94de6208ccc0 state to ffff94dd73828400
[10094.114389] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94df2f7d6800 state to ffff94dd73828400
[10094.114392] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff94de6208ccc0 to [CRTC:31:pipe A]
[10094.114394] [drm:drm_atomic_set_fb_for_plane] Set [FB:59] for plane state ffff94de6208ccc0
[10094.114396] [drm:drm_atomic_check_only] checking ffff94dd73828400
[10094.114441] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10094.114474] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 0 -> 1, off 0, on 1, ms 0
[10094.114483] [drm:drm_atomic_commit] commiting ffff94dd73828400
[10094.114514] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94dd73828400
[10094.114517] [drm:__drm_atomic_state_free] Freeing atomic state ffff94dd73828400
[10094.300888] [drm:drm_atomic_set_fb_for_plane] Set [FB:59] for plane state ffff94da2f34af00
[10094.300923] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10094.300949] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 1, off 0, on 0, ms 0
[10094.319777] [drm:drm_atomic_set_fb_for_plane] Set [FB:59] for plane state ffff94dd77afe840
[10094.319811] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 59
[10094.319837] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 1, off 0, on 0, ms 0
[10094.461632] [drm:drm_atomic_state_init] Allocated atomic state ffff94df303f1800
[10094.461640] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94dd77afe3c0 state to ffff94df303f1800
[10094.461646] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94dd7fa7a000 state to ffff94df303f1800
[10094.461650] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff94dd77afe3c0 to [NOCRTC]
[10094.461653] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff94dd77afe3c0
[10094.461656] [drm:drm_atomic_check_only] checking ffff94df303f1800
[10094.461720] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb -1
[10094.461801] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 0, off 1, on 0, ms 0
[10094.461816] [drm:drm_atomic_commit] commiting ffff94df303f1800
[10094.461866] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94df303f1800
[10094.461872] [drm:__drm_atomic_state_free] Freeing atomic state ffff94df303f1800
[10095.365774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:eDP-1]
[10095.365807] [drm:intel_dp_detect [i915]] [CONNECTOR:47:eDP-1]
[10095.365828] [drm:intel_power_well_enable [i915]] enabling DC off
[10095.365849] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[10095.365879] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink yes
[10095.365907] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[10095.365931] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
[10095.365954] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
[10095.365985] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[10095.366051] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
[10095.366482] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0
[10095.366854] [drm:intel_dp_check_link_status [i915]] DDI A: channel EQ not ok, retraining
[10095.367806] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[10095.367829] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[10095.367850] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[10095.367872] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[10095.368510] [drm:intel_dp_start_link_train [i915]] clock recovery OK
[10095.368532] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
[10095.369487] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[10095.377138] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[10095.377145] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:eDP-1] probed modes :
[10095.377149] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
[10095.377153] [drm:drm_mode_debug_printmodeline] Modeline 49:"1920x1080" 48 110900 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9
[10096.299463] usb 1-8: USB disconnect, device number 13
[10096.591729] usb 1-8: new full-speed USB device number 14 using xhci_hcd
[10096.760958] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b
[10096.760965] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[10096.762857] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[10096.767931] Bluetooth: hci0: Device revision is 5
[10096.767935] Bluetooth: hci0: Secure boot is enabled
[10096.767938] Bluetooth: hci0: OTP lock is enabled
[10096.767940] Bluetooth: hci0: API lock is enabled
[10096.767942] Bluetooth: hci0: Debug lock is disabled
[10096.767945] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[10096.767950] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[10096.840508] wlp3s0: authenticate with 5c:96:9d:69:df:c3
[10096.847610] wlp3s0: send auth to 5c:96:9d:69:df:c3 (try 1/3)
[10096.856453] wlp3s0: authenticated
[10096.856706] wlp3s0: associate with 5c:96:9d:69:df:c3 (try 1/3)
[10096.863414] wlp3s0: RX AssocResp from 5c:96:9d:69:df:c3 (capab=0x1431 status=0 aid=11)
[10096.877482] wlp3s0: associated
[10096.877511] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 5c:96:9d:69:df:c3
[10096.877523] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[10097.117278] [drm:drm_atomic_state_init] Allocated atomic state ffff94dd625ad400
[10097.117286] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94da2d120c00 state to ffff94dd625ad400
[10097.117292] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94df2f7d0800 state to ffff94dd625ad400
[10097.117295] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff94da2d120c00 to [CRTC:31:pipe A]
[10097.117299] [drm:drm_atomic_set_fb_for_plane] Set [FB:55] for plane state ffff94da2d120c00
[10097.117302] [drm:drm_atomic_check_only] checking ffff94dd625ad400
[10097.117363] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 55
[10097.117400] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 0 -> 1, off 0, on 1, ms 0
[10097.117414] [drm:drm_atomic_commit] commiting ffff94dd625ad400
[10097.117454] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94dd625ad400
[10097.117458] [drm:__drm_atomic_state_free] Freeing atomic state ffff94dd625ad400
[10097.164181] [drm:drm_atomic_set_fb_for_plane] Set [FB:55] for plane state ffff94da1584ea80
[10097.164267] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 55
[10097.164295] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 1, off 0, on 0, ms 0
[10097.165507] [drm:drm_atomic_set_fb_for_plane] Set [FB:55] for plane state ffff94df2f699000
[10097.165548] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb 55
[10097.165575] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 1, off 0, on 0, ms 0
[10097.369783] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[10097.369846] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
[10097.369866] [drm:intel_power_well_disable [i915]] disabling DC off
[10097.369886] [drm:skl_enable_dc6 [i915]] Enabling DC6
[10097.369904] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[10097.901352] [drm:drm_atomic_state_init] Allocated atomic state ffff94dd625ad400
[10097.901359] [drm:drm_atomic_get_plane_state] Added [PLANE:29:cursor A] ffff94da2d120b40 state to ffff94dd625ad400
[10097.901364] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:pipe A] ffff94df2f7d6800 state to ffff94dd625ad400
[10097.901367] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff94da2d120b40 to [NOCRTC]
[10097.901369] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff94da2d120b40
[10097.901372] [drm:drm_atomic_check_only] checking ffff94dd625ad400
[10097.901417] [drm:intel_plane_atomic_calc_changes [i915]] [CRTC:31:pipe A] has [PLANE:29:cursor A] with fb -1
[10097.901455] [drm:intel_plane_atomic_calc_changes [i915]] [PLANE:29:cursor A] visible 1 -> 0, off 1, on 0, ms 0
[10097.901463] [drm:drm_atomic_commit] commiting ffff94dd625ad400
[10097.901506] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff94dd625ad400
[10097.901509] [drm:__drm_atomic_state_free] Freeing atomic state ffff94dd625ad400
[10098.614233] Bluetooth: hci0: Waiting for firmware download to complete
[10098.614797] Bluetooth: hci0: Firmware loaded in 1808857 usecs
[10098.614848] Bluetooth: hci0: Waiting for device to boot
[10098.625862] Bluetooth: hci0: Device booted in 10798 usecs
[10098.625868] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[10098.630826] Bluetooth: hci0: Applying Intel DDC parameters completed
[10101.320961] iwlwifi 0000:03:00.0: set key failed