Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Linux version 4.8.0-nightly+ (jenkins@vanaheimr) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #2 SMP Mon Oct 10 16:07:00 CEST 2016 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-nightly+ root=UUID=923347ab-d83e-43a7-88a3-ad3eb8d86663 ro drm.debug=0xe initcall_debug crashkernel=384M-:128M Oct 13 16:52:33 kblu3 kernel: [ 0.000000] KERNEL supported cpus: Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Intel GenuineIntel Oct 13 16:52:33 kblu3 kernel: [ 0.000000] AMD AuthenticAMD Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Centaur CentaurHauls Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/fpu: Using 'eager' FPU context switches. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] e820: BIOS-provided physical RAM map: Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008cc47fff] usable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008cc48000-0x000000008cc48fff] ACPI NVS Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008cc49000-0x000000008cc49fff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008cc4a000-0x000000008ce0dfff] usable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008ce0e000-0x000000008ce77fff] type 20 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008ce78000-0x000000008d127fff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008d128000-0x000000008d25efff] ACPI NVS Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008d25f000-0x000000008d25ffff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008d260000-0x000000008d299fff] ACPI NVS Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008d29a000-0x000000008d2fefff] ACPI data Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008d2ff000-0x000000008d2fffff] usable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x000000008d300000-0x000000008fffffff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff900000-0x00000000ffffffff] reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] NX (Execute Disable) protection: active Oct 13 16:52:33 kblu3 kernel: [ 0.000000] efi: EFI v2.50 by EDK II Oct 13 16:52:33 kblu3 kernel: [ 0.000000] efi: SMBIOS=0x8ce94000 ACPI=0x8d2fe000 ACPI 2.0=0x8d2fe014 MEMATTR=0x8a7ab358 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] SMBIOS 2.8 present. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] DMI: Intel Corporation Kabylake Client platform/Kabylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X045.P01.1606291634 06/29/2016 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] MTRR default type: write-back Oct 13 16:52:33 kblu3 kernel: [ 0.000000] MTRR fixed ranges enabled: Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 00000-9FFFF write-back Oct 13 16:52:33 kblu3 kernel: [ 0.000000] A0000-BFFFF uncachable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] C0000-FFFFF write-protect Oct 13 16:52:33 kblu3 kernel: [ 0.000000] MTRR variable ranges enabled: Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 3 base 008E000000 mask 7FFE000000 uncachable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 4 base 008D800000 mask 7FFF800000 uncachable Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 5 disabled Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 6 disabled Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 7 disabled Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 8 disabled Oct 13 16:52:33 kblu3 kernel: [ 0.000000] 9 disabled Oct 13 16:52:33 kblu3 kernel: [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT Oct 13 16:52:33 kblu3 kernel: [ 0.000000] e820: last_pfn = 0x8d300 max_arch_pfn = 0x400000000 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Scanning 1 areas for low memory corruption Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Using GB pages for direct mapping Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BRK [0x03038000, 0x03038fff] PGTABLE Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BRK [0x03039000, 0x03039fff] PGTABLE Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BRK [0x0303a000, 0x0303afff] PGTABLE Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BRK [0x0303b000, 0x0303bfff] PGTABLE Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BRK [0x0303c000, 0x0303cfff] PGTABLE Oct 13 16:52:33 kblu3 kernel: [ 0.000000] BRK [0x0303d000, 0x0303dfff] PGTABLE Oct 13 16:52:33 kblu3 kernel: [ 0.000000] RAMDISK: [mem 0x33550000-0x35a9ffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: Early table checksum verification disabled Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: RSDP 0x000000008D2FE014 000024 (v02 INTEL ) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: XSDT 0x000000008D2A9188 0000FC (v01 INTEL KBL-ULT 00000000 01000013) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: FACP 0x000000008D2F7000 0000F4 (v05 INTEL KBL-ULT 00000000 MSFT 0000005F) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: DSDT 0x000000008D2C1000 032C91 (v02 INTEL SKL 00000000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: FACS 0x000000008D27A000 000040 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: UEFI 0x000000008D28F000 000042 (v01 INTEL EDK2 00000002 01000013) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2F9000 0031ED (v02 SaSsdt SaSsdt 00003000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2F8000 0005B6 (v02 Intel PerfTune 00001000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: HPET 0x000000008D2F6000 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: APIC 0x000000008D2F5000 0000BC (v03 INTEL KBL-ULT 00000001 MSFT 0000005F) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: MCFG 0x000000008D2F4000 00003C (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2BB000 00525F (v02 INTEL RVP7Rtd3 00001000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2BA000 000E66 (v02 INTEL Ther_Rvp 00001000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2B9000 0001BC (v02 INTEL Sata0Ide 00001000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2B8000 000931 (v02 INTEL xh_rvp07 00000000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: BOOT 0x000000008D2B7000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2B6000 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2B4000 00106A (v02 INTEL UsbCTabl 00001000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LPIT 0x000000008D2B3000 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: WSMT 0x000000008D2B2000 000028 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2B1000 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2B0000 000346 (v01 INTEL EInkApp 00000000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2AC000 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: SSDT 0x000000008D2AB000 00051E (v02 INTEL zpodd 00001000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: DBGP 0x000000008D2AA000 000034 (v01 INTEL 00000002 MSFT 0000005F) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: DBG2 0x000000008D2FD000 000054 (v00 INTEL 00000002 MSFT 0000005F) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: DMAR 0x000000008D2A8000 000114 (v01 INTEL KBL 00000001 INTL 00000001) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: NHLT 0x000000008D2A6000 0017F0 (v00 INTEL EDK2 00000002 01000013) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: FPDT 0x000000008D2A5000 000044 (v01 INTEL EDK2 00000002 01000013) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: ASF! 0x000000008D2A4000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: BGRT 0x000000008D2A3000 000038 (v01 INTEL EDK2 00000002 01000013) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] No NUMA configuration found Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] NODE_DATA(0) allocated [mem 0x26effa000-0x26effdfff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Reserving 128MB of memory at 688MB for crashkernel (System RAM: 8125MB) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Zone ranges: Oct 13 16:52:33 kblu3 kernel: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Normal [mem 0x0000000100000000-0x000000026effffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Movable zone start for each node Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Early memory node ranges Oct 13 16:52:33 kblu3 kernel: [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] node 0: [mem 0x0000000000100000-0x000000008cc47fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] node 0: [mem 0x000000008cc4a000-0x000000008ce0dfff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] node 0: [mem 0x000000008d2ff000-0x000000008d2fffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] node 0: [mem 0x0000000100000000-0x000000026effffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] On node 0 totalpages: 2080169 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] DMA zone: 64 pages used for memmap Oct 13 16:52:33 kblu3 kernel: [ 0.000000] DMA zone: 24 pages reserved Oct 13 16:52:33 kblu3 kernel: [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] DMA32 zone: 8953 pages used for memmap Oct 13 16:52:33 kblu3 kernel: [ 0.000000] DMA32 zone: 572941 pages, LIFO batch:31 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Normal zone: 23488 pages used for memmap Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Normal zone: 1503232 pages, LIFO batch:31 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Reserving Intel graphics memory at 0x000000008e000000-0x000000008fffffff Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: IRQ0 used by override. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: IRQ9 used by override. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Oct 13 16:52:33 kblu3 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8cc48000-0x8cc48fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8cc49000-0x8cc49fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8ce0e000-0x8ce77fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8ce78000-0x8d127fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8d128000-0x8d25efff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8d25f000-0x8d25ffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8d260000-0x8d299fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8d29a000-0x8d2fefff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x8d300000-0x8fffffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe00ffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xff8fffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PM: Registered nosave memory: [mem 0xff900000-0xffffffff] Oct 13 16:52:33 kblu3 kernel: [ 0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Oct 13 16:52:33 kblu3 kernel: [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns Oct 13 16:52:33 kblu3 kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] percpu: Embedded 36 pages/cpu @ffff88026ec00000 s107352 r8192 d31912 u262144 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] pcpu-alloc: s107352 r8192 d31912 u262144 alloc=1*2097152 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2047640 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Policy zone: Normal Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-nightly+ root=UUID=923347ab-d83e-43a7-88a3-ad3eb8d86663 ro drm.debug=0xe initcall_debug crashkernel=384M-:128M Oct 13 16:52:33 kblu3 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Memory: 7883792K/8320676K available (8147K kernel code, 1423K rwdata, 3764K rodata, 1536K init, 1316K bss, 436884K reserved, 0K cma-reserved) Oct 13 16:52:33 kblu3 kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Hierarchical RCU implementation. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Build-time adjustment of leaf fanout to 64. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:2048 16 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Offload RCU callbacks from all CPUs Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Offload RCU callbacks from CPUs: 0-7. Oct 13 16:52:33 kblu3 kernel: [ 0.000000] Console: colour dummy device 80x25 Oct 13 16:52:33 kblu3 kernel: [ 0.000000] console [tty0] enabled Oct 13 16:52:33 kblu3 kernel: [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns Oct 13 16:52:33 kblu3 kernel: [ 0.000000] hpet clockevent registered Oct 13 16:52:33 kblu3 kernel: [ 0.000000] tsc: Detected 1800.000 MHz processor Oct 13 16:52:33 kblu3 kernel: [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000) Oct 13 16:52:33 kblu3 kernel: [ 0.000036] pid_max: default: 32768 minimum: 301 Oct 13 16:52:33 kblu3 kernel: [ 0.000046] ACPI: Core revision 20160422 Oct 13 16:52:33 kblu3 kernel: [ 0.058624] ACPI: 13 ACPI AML tables successfully acquired and loaded Oct 13 16:52:33 kblu3 kernel: [ 0.058630] Oct 13 16:52:33 kblu3 kernel: [ 0.059143] Security Framework initialized Oct 13 16:52:33 kblu3 kernel: [ 0.059147] Yama: becoming mindful. Oct 13 16:52:33 kblu3 kernel: [ 0.059169] AppArmor: AppArmor initialized Oct 13 16:52:33 kblu3 kernel: [ 0.059698] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Oct 13 16:52:33 kblu3 kernel: [ 0.061682] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Oct 13 16:52:33 kblu3 kernel: [ 0.062511] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Oct 13 16:52:33 kblu3 kernel: [ 0.062523] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) Oct 13 16:52:33 kblu3 kernel: [ 0.062825] CPU: Physical Processor ID: 0 Oct 13 16:52:33 kblu3 kernel: [ 0.062829] CPU: Processor Core ID: 0 Oct 13 16:52:33 kblu3 kernel: [ 0.062837] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' Oct 13 16:52:33 kblu3 kernel: [ 0.062840] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) Oct 13 16:52:33 kblu3 kernel: [ 0.062850] mce: CPU supports 9 MCE banks Oct 13 16:52:33 kblu3 kernel: [ 0.062864] CPU0: Thermal monitoring enabled (TM1) Oct 13 16:52:33 kblu3 kernel: [ 0.062892] process: using mwait in idle threads Oct 13 16:52:33 kblu3 kernel: [ 0.062898] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 Oct 13 16:52:33 kblu3 kernel: [ 0.062901] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 Oct 13 16:52:33 kblu3 kernel: [ 0.063443] Freeing SMP alternatives memory: 32K (ffffffff81ee5000 - ffffffff81eed000) Oct 13 16:52:33 kblu3 kernel: [ 0.067879] ftrace: allocating 32662 entries in 128 pages Oct 13 16:52:33 kblu3 kernel: [ 0.085441] smpboot: APIC(0) Converting physical 0 to logical package 0 Oct 13 16:52:33 kblu3 kernel: [ 0.085446] smpboot: Max logical packages: 4 Oct 13 16:52:33 kblu3 kernel: [ 0.085459] DMAR: Host address width 39 Oct 13 16:52:33 kblu3 kernel: [ 0.085463] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 Oct 13 16:52:33 kblu3 kernel: [ 0.085475] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e Oct 13 16:52:33 kblu3 kernel: [ 0.085483] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 Oct 13 16:52:33 kblu3 kernel: [ 0.085491] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da Oct 13 16:52:33 kblu3 kernel: [ 0.085499] DMAR: RMRR base: 0x0000008d0c0000 end: 0x0000008d0dffff Oct 13 16:52:33 kblu3 kernel: [ 0.085503] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff Oct 13 16:52:33 kblu3 kernel: [ 0.085506] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 Oct 13 16:52:33 kblu3 kernel: [ 0.085509] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 Oct 13 16:52:33 kblu3 kernel: [ 0.085512] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00 Oct 13 16:52:33 kblu3 kernel: [ 0.085517] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 Oct 13 16:52:33 kblu3 kernel: [ 0.085520] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 Oct 13 16:52:33 kblu3 kernel: [ 0.085524] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. Oct 13 16:52:33 kblu3 kernel: [ 0.087085] DMAR-IR: Enabled IRQ remapping in x2apic mode Oct 13 16:52:33 kblu3 kernel: [ 0.087089] x2apic enabled Oct 13 16:52:33 kblu3 kernel: [ 0.087108] Switched APIC routing to cluster x2apic. Oct 13 16:52:33 kblu3 kernel: [ 0.091299] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Oct 13 16:52:33 kblu3 kernel: [ 0.131000] TSC deadline timer enabled Oct 13 16:52:33 kblu3 kernel: [ 0.131006] smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0x9) Oct 13 16:52:33 kblu3 kernel: [ 0.131020] calling trace_init_flags_sys_exit+0x0/0xf @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131022] initcall trace_init_flags_sys_exit+0x0/0xf returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131024] calling trace_init_flags_sys_enter+0x0/0xf @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131025] initcall trace_init_flags_sys_enter+0x0/0xf returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131027] calling init_hw_perf_events+0x0/0x564 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131028] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. Oct 13 16:52:33 kblu3 kernel: [ 0.131078] ... version: 4 Oct 13 16:52:33 kblu3 kernel: [ 0.131081] ... bit width: 48 Oct 13 16:52:33 kblu3 kernel: [ 0.131084] ... generic registers: 4 Oct 13 16:52:33 kblu3 kernel: [ 0.131087] ... value mask: 0000ffffffffffff Oct 13 16:52:33 kblu3 kernel: [ 0.131090] ... max period: 0000ffffffffffff Oct 13 16:52:33 kblu3 kernel: [ 0.131093] ... fixed-purpose events: 3 Oct 13 16:52:33 kblu3 kernel: [ 0.131096] ... event mask: 000000070000000f Oct 13 16:52:33 kblu3 kernel: [ 0.131120] initcall init_hw_perf_events+0x0/0x564 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131123] calling xen_init_spinlocks_jump+0x0/0x29 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131125] initcall xen_init_spinlocks_jump+0x0/0x29 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131127] calling init_real_mode+0x0/0x1aa @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131139] initcall init_real_mode+0x0/0x1aa returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131140] calling trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131142] initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131144] calling register_trigger_all_cpu_backtrace+0x0/0x16 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131145] initcall register_trigger_all_cpu_backtrace+0x0/0x16 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131147] calling numachip_system_init+0x0/0x67 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131148] initcall numachip_system_init+0x0/0x67 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131150] calling kvm_spinlock_init_jump+0x0/0x34 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131152] initcall kvm_spinlock_init_jump+0x0/0x34 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131154] calling early_efi_map_fb+0x0/0x32 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131156] initcall early_efi_map_fb+0x0/0x32 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131159] calling spawn_ksoftirqd+0x0/0x2d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131180] initcall spawn_ksoftirqd+0x0/0x2d returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131182] calling init_workqueues+0x0/0x530 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131258] initcall init_workqueues+0x0/0x530 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131259] calling migration_init+0x0/0x34 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131261] initcall migration_init+0x0/0x34 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131262] calling check_cpu_stall_init+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131264] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131266] calling rcu_spawn_gp_kthread+0x0/0x137 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131297] initcall rcu_spawn_gp_kthread+0x0/0x137 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131299] calling cpu_stop_init+0x0/0x9b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131311] initcall cpu_stop_init+0x0/0x9b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131313] calling relay_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131317] initcall relay_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131319] calling init_events+0x0/0x60 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131326] initcall init_events+0x0/0x60 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131328] calling init_trace_printk+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131330] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131333] calling event_trace_enable_again+0x0/0x24 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131335] initcall event_trace_enable_again+0x0/0x24 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131337] calling jump_label_init_module+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131339] initcall jump_label_init_module+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131340] calling lru_init+0x0/0x4e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131353] initcall lru_init+0x0/0x4e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131355] calling dynamic_debug_init+0x0/0x26d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131879] initcall dynamic_debug_init+0x0/0x26d returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.131882] calling rand_initialize+0x0/0x100 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.131946] initcall rand_initialize+0x0/0x100 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.132108] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. Oct 13 16:52:33 kblu3 kernel: [ 0.132219] x86: Booting SMP configuration: Oct 13 16:52:33 kblu3 kernel: [ 0.132223] .... node #0, CPUs: #1 #2 #3 Oct 13 16:52:33 kblu3 kernel: [ 0.373195] x86: Booted up 1 node, 4 CPUs Oct 13 16:52:33 kblu3 kernel: [ 0.373204] smpboot: Total of 4 processors activated (14403.53 BogoMIPS) Oct 13 16:52:33 kblu3 kernel: [ 0.379307] devtmpfs: initialized Oct 13 16:52:33 kblu3 kernel: [ 0.379375] x86/mm: Memory block size: 128MB Oct 13 16:52:33 kblu3 kernel: [ 0.382076] calling ipc_ns_init+0x0/0x48 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382079] initcall ipc_ns_init+0x0/0x48 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382081] calling init_mmap_min_addr+0x0/0x16 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382083] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382086] calling evm_display_config+0x0/0x2d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382087] evm: security.selinux Oct 13 16:52:33 kblu3 kernel: [ 0.382090] evm: security.SMACK64 Oct 13 16:52:33 kblu3 kernel: [ 0.382093] evm: security.ima Oct 13 16:52:33 kblu3 kernel: [ 0.382096] evm: security.capability Oct 13 16:52:33 kblu3 kernel: [ 0.382101] initcall evm_display_config+0x0/0x2d returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382104] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382107] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382108] calling net_ns_init+0x0/0x139 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382140] initcall net_ns_init+0x0/0x139 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382173] calling e820_mark_nvs_memory+0x0/0x3b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382175] PM: Registering ACPI NVS region [mem 0x8cc48000-0x8cc48fff] (4096 bytes) Oct 13 16:52:33 kblu3 kernel: [ 0.382181] PM: Registering ACPI NVS region [mem 0x8d128000-0x8d25efff] (1273856 bytes) Oct 13 16:52:33 kblu3 kernel: [ 0.382202] PM: Registering ACPI NVS region [mem 0x8d260000-0x8d299fff] (237568 bytes) Oct 13 16:52:33 kblu3 kernel: [ 0.382211] initcall e820_mark_nvs_memory+0x0/0x3b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382213] calling cpufreq_register_tsc_scaling+0x0/0x33 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382215] initcall cpufreq_register_tsc_scaling+0x0/0x33 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382216] calling init_cpu_syscore+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382218] initcall init_cpu_syscore+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382220] calling reboot_init+0x0/0x37 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382226] initcall reboot_init+0x0/0x37 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382227] calling init_lapic_sysfs+0x0/0x23 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382229] initcall init_lapic_sysfs+0x0/0x23 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382231] calling cpu_hotplug_pm_sync_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382234] initcall cpu_hotplug_pm_sync_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382236] calling alloc_frozen_cpus+0x0/0x8 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382238] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382240] calling wq_sysfs_init+0x0/0x2b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382259] initcall wq_sysfs_init+0x0/0x2b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382261] calling ksysfs_init+0x0/0x93 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382271] initcall ksysfs_init+0x0/0x93 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382272] calling pm_init+0x0/0x76 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382296] initcall pm_init+0x0/0x76 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382297] calling pm_disk_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382301] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382304] calling swsusp_header_init+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382305] initcall swsusp_header_init+0x0/0x40 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382307] calling init_jiffies_clocksource+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382309] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Oct 13 16:52:33 kblu3 kernel: [ 0.382316] initcall init_jiffies_clocksource+0x0/0x19 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382318] calling cgroup_wq_init+0x0/0x58 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382333] initcall cgroup_wq_init+0x0/0x58 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382335] calling ftrace_mod_cmd_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382338] initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382340] calling init_function_trace+0x0/0x92 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382344] initcall init_function_trace+0x0/0x92 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382346] calling init_wakeup_tracer+0x0/0x32 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382349] initcall init_wakeup_tracer+0x0/0x32 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382351] calling init_graph_trace+0x0/0x68 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382355] initcall init_graph_trace+0x0/0x68 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382358] calling init_per_zone_wmark_min+0x0/0x74 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382363] initcall init_per_zone_wmark_min+0x0/0x74 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382365] calling init_zero_pfn+0x0/0x39 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382366] initcall init_zero_pfn+0x0/0x39 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382369] calling memory_failure_init+0x0/0xa4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382371] initcall memory_failure_init+0x0/0xa4 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382373] calling cma_init_reserved_areas+0x0/0x1d4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382376] initcall cma_init_reserved_areas+0x0/0x1d4 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382377] calling fsnotify_init+0x0/0x26 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382379] initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382380] calling filelock_init+0x0/0x9f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382385] initcall filelock_init+0x0/0x9f returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382387] calling init_script_binfmt+0x0/0x16 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382388] initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382389] calling init_elf_binfmt+0x0/0x16 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382390] initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382392] calling init_compat_elf_binfmt+0x0/0x16 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382393] initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382395] calling debugfs_init+0x0/0x50 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382399] initcall debugfs_init+0x0/0x50 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382401] calling tracefs_init+0x0/0x3b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382405] initcall tracefs_init+0x0/0x3b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382407] calling securityfs_init+0x0/0x47 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382410] initcall securityfs_init+0x0/0x47 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382411] calling prandom_init+0x0/0xe4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382423] initcall prandom_init+0x0/0xe4 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382425] calling pinctrl_init+0x0/0xb2 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382426] pinctrl core: initialized pinctrl subsystem Oct 13 16:52:33 kblu3 kernel: [ 0.382441] initcall pinctrl_init+0x0/0xb2 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382443] calling gpiolib_dev_init+0x0/0xd4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382452] initcall gpiolib_dev_init+0x0/0xd4 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382460] calling sfi_sysfs_init+0x0/0xd9 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382466] initcall sfi_sysfs_init+0x0/0xd9 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382469] calling virtio_init+0x0/0x30 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382475] initcall virtio_init+0x0/0x30 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382477] calling regulator_init+0x0/0x8c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382534] initcall regulator_init+0x0/0x8c returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382536] calling iommu_init+0x0/0x2b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382539] initcall iommu_init+0x0/0x2b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382543] calling early_resume_init+0x0/0xb0 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382647] RTC time: 14:52:26, date: 10/13/16 Oct 13 16:52:33 kblu3 kernel: [ 0.382652] initcall early_resume_init+0x0/0xb0 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382654] calling cpufreq_core_init+0x0/0x4c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382657] initcall cpufreq_core_init+0x0/0x4c returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382659] calling cpuidle_init+0x0/0x3d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382663] initcall cpuidle_init+0x0/0x3d returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382666] calling capsule_reboot_register+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382668] initcall capsule_reboot_register+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382669] calling bsp_pm_check_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382671] initcall bsp_pm_check_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382672] calling sock_init+0x0/0x8f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382727] initcall sock_init+0x0/0x8f returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382728] calling net_inuse_init+0x0/0x26 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382731] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382732] calling netpoll_init+0x0/0x31 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382734] initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382735] calling netlink_proto_init+0x0/0x160 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382772] NET: Registered protocol family 16 Oct 13 16:52:33 kblu3 kernel: [ 0.382783] initcall netlink_proto_init+0x0/0x160 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382785] calling __gnttab_init+0x0/0x30 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382786] initcall __gnttab_init+0x0/0x30 returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382806] calling bdi_class_init+0x0/0x49 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382811] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382812] calling mm_sysfs_init+0x0/0x29 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382815] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382816] calling kobject_uevent_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382819] initcall kobject_uevent_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382821] calling pcibus_class_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382824] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382826] calling pci_driver_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382835] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382837] calling rio_bus_init+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382846] initcall rio_bus_init+0x0/0x40 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382848] calling backlight_class_init+0x0/0xaa @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382852] initcall backlight_class_init+0x0/0xaa returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382854] calling xenbus_init+0x0/0x29c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382855] initcall xenbus_init+0x0/0x29c returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382857] calling tty_class_init+0x0/0x34 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382860] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382862] calling vtconsole_class_init+0x0/0xc3 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382885] initcall vtconsole_class_init+0x0/0xc3 returned 0 after 3906 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382887] calling iommu_dev_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382892] initcall iommu_dev_init+0x0/0x19 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382894] calling mipi_dsi_bus_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382901] initcall mipi_dsi_bus_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382903] calling wakeup_sources_debugfs_init+0x0/0x2b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382917] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382919] calling register_node_type+0x0/0x2f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382939] initcall register_node_type+0x0/0x2f returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382942] calling regmap_initcall+0x0/0xd @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382945] initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382947] calling sram_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382953] initcall sram_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382955] calling syscon_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382960] initcall syscon_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382961] calling spi_init+0x0/0xa8 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382970] initcall spi_init+0x0/0xa8 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382971] calling i2c_init+0x0/0xc7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.382983] initcall i2c_init+0x0/0xc7 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.382984] calling init_ladder+0x0/0x25 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.390938] cpuidle: using governor ladder Oct 13 16:52:33 kblu3 kernel: [ 0.390943] initcall init_ladder+0x0/0x25 returned 0 after 7812 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.390945] calling init_menu+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.398942] cpuidle: using governor menu Oct 13 16:52:33 kblu3 kernel: [ 0.398947] initcall init_menu+0x0/0x12 returned 0 after 7812 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.398948] calling amd_postcore_init+0x0/0x141 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.398949] initcall amd_postcore_init+0x0/0x141 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.398968] calling bts_init+0x0/0xaa @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.398972] initcall bts_init+0x0/0xaa returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.398974] calling pt_init+0x0/0x367 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.398984] initcall pt_init+0x0/0x367 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.398986] calling boot_params_ksysfs_init+0x0/0x226 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.398990] initcall boot_params_ksysfs_init+0x0/0x226 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.398991] calling sbf_init+0x0/0xf5 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399007] Simple Boot Flag at 0x47 set to 0x80 Oct 13 16:52:33 kblu3 kernel: [ 0.399023] initcall sbf_init+0x0/0xf5 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399024] calling arch_kdebugfs_init+0x0/0x24 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399027] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399029] calling mtrr_if_init+0x0/0x65 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399032] initcall mtrr_if_init+0x0/0x65 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399034] calling ffh_cstate_init+0x0/0x2b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399037] initcall ffh_cstate_init+0x0/0x2b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399038] calling activate_jump_labels+0x0/0x35 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399040] initcall activate_jump_labels+0x0/0x35 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399042] calling gigantic_pages_init+0x0/0x33 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399045] initcall gigantic_pages_init+0x0/0x33 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399047] calling kcmp_cookies_init+0x0/0x36 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399050] initcall kcmp_cookies_init+0x0/0x36 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399052] calling acpi_pci_init+0x0/0x66 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399053] ACPI: bus type PCI registered Oct 13 16:52:33 kblu3 kernel: [ 0.399057] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Oct 13 16:52:33 kblu3 kernel: [ 0.399062] initcall acpi_pci_init+0x0/0x66 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399063] calling dma_bus_init+0x0/0xc2 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399075] initcall dma_bus_init+0x0/0xc2 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399076] calling dma_channel_table_init+0x0/0xcf @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399082] initcall dma_channel_table_init+0x0/0xcf returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399084] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399085] initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399087] calling register_xen_pci_notifier+0x0/0x36 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399088] initcall register_xen_pci_notifier+0x0/0x36 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399090] calling xen_pcpu_init+0x0/0xc9 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399091] initcall xen_pcpu_init+0x0/0xc9 returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399093] calling dmi_id_init+0x0/0x30f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399133] initcall dmi_id_init+0x0/0x30f returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399135] calling numachip_timer_init+0x0/0x52 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399137] initcall numachip_timer_init+0x0/0x52 returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399139] calling pci_arch_init+0x0/0x68 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399170] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Oct 13 16:52:33 kblu3 kernel: [ 0.399177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 Oct 13 16:52:33 kblu3 kernel: [ 0.399190] PCI: Using configuration type 1 for base access Oct 13 16:52:33 kblu3 kernel: [ 0.399197] initcall pci_arch_init+0x0/0x68 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399216] calling init_vdso+0x0/0x3e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399246] initcall init_vdso+0x0/0x3e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399247] calling sysenter_setup+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399250] initcall sysenter_setup+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399252] calling fixup_ht_bug+0x0/0xd2 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399254] initcall fixup_ht_bug+0x0/0xd2 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399255] calling topology_init+0x0/0x89 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399501] initcall topology_init+0x0/0x89 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399502] calling mtrr_init_finialize+0x0/0x3f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399505] initcall mtrr_init_finialize+0x0/0x3f returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399507] calling uid_cache_init+0x0/0x95 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.399510] initcall uid_cache_init+0x0/0x95 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.399512] calling param_sysfs_init+0x0/0x1b2 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.400625] initcall param_sysfs_init+0x0/0x1b2 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.400627] calling proc_schedstat_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.400629] initcall proc_schedstat_init+0x0/0x22 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.400630] calling pm_sysrq_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.406954] initcall pm_sysrq_init+0x0/0x19 returned 0 after 7812 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.406955] calling create_proc_profile+0x0/0xe0 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.406957] initcall create_proc_profile+0x0/0xe0 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.406959] calling crash_save_vmcoreinfo_init+0x0/0x5d3 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.406983] initcall crash_save_vmcoreinfo_init+0x0/0x5d3 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.406984] calling crash_notes_memory_init+0x0/0x37 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.406988] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.406989] calling cgroup_namespaces_init+0x0/0x8 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.406991] initcall cgroup_namespaces_init+0x0/0x8 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.406993] calling user_namespaces_init+0x0/0x2d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.406999] initcall user_namespaces_init+0x0/0x2d returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407001] calling hung_task_init+0x0/0x51 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407017] initcall hung_task_init+0x0/0x51 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407019] calling oom_init+0x0/0x6a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407031] initcall oom_init+0x0/0x6a returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407033] calling default_bdi_init+0x0/0x3f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407072] initcall default_bdi_init+0x0/0x3f returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407073] calling percpu_enable_async+0x0/0xf @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407075] initcall percpu_enable_async+0x0/0xf returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407077] calling kcompactd_init+0x0/0x69 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407091] initcall kcompactd_init+0x0/0x69 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407094] calling init_reserve_notifier+0x0/0x26 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407096] initcall init_reserve_notifier+0x0/0x26 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407099] calling init_admin_reserve+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407101] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407103] calling init_user_reserve+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407106] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407107] calling hugetlb_init+0x0/0x499 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407109] HugeTLB registered 1 GB page size, pre-allocated 0 pages Oct 13 16:52:33 kblu3 kernel: [ 0.407114] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 13 16:52:33 kblu3 kernel: [ 0.407139] initcall hugetlb_init+0x0/0x499 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407141] calling mmu_notifier_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407143] initcall mmu_notifier_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407145] calling ksm_init+0x0/0x15b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407168] initcall ksm_init+0x0/0x15b returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407170] calling hugepage_init+0x0/0x164 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407194] initcall hugepage_init+0x0/0x164 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407197] calling mem_cgroup_swap_init+0x0/0x73 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407199] initcall mem_cgroup_swap_init+0x0/0x73 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407201] calling mem_cgroup_init+0x0/0x115 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407204] initcall mem_cgroup_init+0x0/0x115 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407206] calling crypto_wq_init+0x0/0x33 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407228] initcall crypto_wq_init+0x0/0x33 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407230] calling cryptomgr_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407233] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407234] calling init_bio+0x0/0xd1 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407277] initcall init_bio+0x0/0xd1 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407279] calling blk_settings_init+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407280] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407281] calling blk_ioc_init+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407285] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407286] calling blk_softirq_init+0x0/0x6a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407288] initcall blk_softirq_init+0x0/0x6a returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407289] calling blk_mq_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407291] initcall blk_mq_init+0x0/0x19 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407292] calling genhd_device_init+0x0/0x76 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407329] initcall genhd_device_init+0x0/0x76 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407331] calling irq_poll_setup+0x0/0x6a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407333] initcall irq_poll_setup+0x0/0x6a returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407334] calling byt_gpio_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407340] initcall byt_gpio_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407342] calling gpiolib_debugfs_init+0x0/0x24 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407346] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407347] calling lp_gpio_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407353] initcall lp_gpio_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407354] calling rc5t583_gpio_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407361] initcall rc5t583_gpio_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407362] calling sx150x_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407367] initcall sx150x_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407369] calling palmas_gpio_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407374] initcall palmas_gpio_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407375] calling tps6586x_gpio_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407381] initcall tps6586x_gpio_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407382] calling tps65910_gpio_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407387] initcall tps65910_gpio_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407389] calling pwm_debugfs_init+0x0/0x24 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407396] initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407397] calling pwm_sysfs_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407401] initcall pwm_sysfs_init+0x0/0x19 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407404] calling pci_slot_init+0x0/0x50 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407407] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407409] calling fbmem_init+0x0/0xd7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407414] initcall fbmem_init+0x0/0xd7 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 0.407416] calling acpi_init+0x0/0x2ee @ 1 Oct 13 16:52:33 kblu3 kernel: [ 0.407434] ACPI: Added _OSI(Module Device) Oct 13 16:52:33 kblu3 kernel: [ 0.407438] ACPI: Added _OSI(Processor Device) Oct 13 16:52:33 kblu3 kernel: [ 0.407441] ACPI: Added _OSI(3.0 _SCP Extensions) Oct 13 16:52:33 kblu3 kernel: [ 0.407445] ACPI: Added _OSI(Processor Aggregator Device) Oct 13 16:52:33 kblu3 kernel: [ 0.411399] ACPI: Executed 37 blocks of module-level executable AML code Oct 13 16:52:33 kblu3 kernel: [ 0.422857] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored Oct 13 16:52:33 kblu3 kernel: [ 0.426060] ACPI: Dynamic OEM Table Load: Oct 13 16:52:33 kblu3 kernel: [ 0.426101] ACPI: SSDT 0xFFFF8802649BA000 00058B (v02 PmRef Cpu0Ist 00003000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.427448] ACPI: Executed 1 blocks of module-level executable AML code Oct 13 16:52:33 kblu3 kernel: [ 0.427525] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked Oct 13 16:52:33 kblu3 kernel: [ 0.429296] ACPI: Dynamic OEM Table Load: Oct 13 16:52:33 kblu3 kernel: [ 0.429310] ACPI: SSDT 0xFFFF8802649BA800 0004E8 (v02 PmRef Cpu0Cst 00003001 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.430634] ACPI: Executed 1 blocks of module-level executable AML code Oct 13 16:52:33 kblu3 kernel: [ 0.431036] ACPI: Dynamic OEM Table Load: Oct 13 16:52:33 kblu3 kernel: [ 0.431049] ACPI: SSDT 0xFFFF8802649BB000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.432604] ACPI: Executed 1 blocks of module-level executable AML code Oct 13 16:52:33 kblu3 kernel: [ 0.432752] ACPI: Dynamic OEM Table Load: Oct 13 16:52:33 kblu3 kernel: [ 0.432763] ACPI: SSDT 0xFFFF880264A58C00 00018A (v02 PmRef ApCst 00003000 INTL 20160422) Oct 13 16:52:33 kblu3 kernel: [ 0.434096] ACPI: Executed 1 blocks of module-level executable AML code Oct 13 16:52:33 kblu3 kernel: [ 0.436259] ACPI : EC: EC started Oct 13 16:52:33 kblu3 kernel: [ 1.316630] ACPI: Interpreter enabled Oct 13 16:52:33 kblu3 kernel: [ 1.316676] ACPI: (supports S0 S3 S4 S5) Oct 13 16:52:33 kblu3 kernel: [ 1.316681] ACPI: Using IOAPIC for interrupt routing Oct 13 16:52:33 kblu3 kernel: [ 1.316721] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Oct 13 16:52:33 kblu3 kernel: [ 1.326218] ACPI: Power Resource [PX06] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.329050] ACPI: Power Resource [USBC] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.329258] ACPI: Power Resource [PAUD] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.330123] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.330632] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.331139] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.331646] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.332489] ACPI: Power Resource [PXP] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.381245] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.381514] ACPI: Power Resource [PXP] (off) Oct 13 16:52:33 kblu3 kernel: [ 1.382148] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.382664] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.383173] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.383432] ACPI: Power Resource [PXP] (off) Oct 13 16:52:33 kblu3 kernel: [ 1.384126] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.384751] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.385260] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.385767] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.386250] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.386732] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.387216] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.387696] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.388181] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.388672] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.389155] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.389647] ACPI: Power Resource [WRST] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.391026] ACPI: Power Resource [SPPR] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.391786] ACPI: Power Resource [SPPR] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.393058] ACPI: Power Resource [SPPR] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.394234] ACPI: Power Resource [V0PR] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.394301] ACPI: Power Resource [V1PR] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.394366] ACPI: Power Resource [V2PR] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.397129] ACPI: Power Resource [PXTC] (on) Oct 13 16:52:33 kblu3 kernel: [ 1.405318] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) Oct 13 16:52:33 kblu3 kernel: [ 1.408850] ACPI: Power Resource [FN00] (off) Oct 13 16:52:33 kblu3 kernel: [ 1.408962] ACPI: Power Resource [FN01] (off) Oct 13 16:52:33 kblu3 kernel: [ 1.409070] ACPI: Power Resource [FN02] (off) Oct 13 16:52:33 kblu3 kernel: [ 1.409176] ACPI: Power Resource [FN03] (off) Oct 13 16:52:33 kblu3 kernel: [ 1.409283] ACPI: Power Resource [FN04] (off) Oct 13 16:52:33 kblu3 kernel: [ 1.410666] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) Oct 13 16:52:33 kblu3 kernel: [ 1.410675] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] Oct 13 16:52:33 kblu3 kernel: [ 1.413635] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] Oct 13 16:52:33 kblu3 kernel: [ 1.415721] PCI host bridge to bus 0000:00 Oct 13 16:52:33 kblu3 kernel: [ 1.415726] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] Oct 13 16:52:33 kblu3 kernel: [ 1.415731] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415735] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415741] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415746] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415751] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415757] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415762] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415767] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415773] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415778] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415784] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415789] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415794] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415799] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415805] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415810] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415816] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] Oct 13 16:52:33 kblu3 kernel: [ 1.415821] pci_bus 0000:00: root bus resource [bus 00-fe] Oct 13 16:52:33 kblu3 kernel: [ 1.415835] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 Oct 13 16:52:33 kblu3 kernel: [ 1.416779] pci 0000:00:02.0: [8086:5926] type 00 class 0x030000 Oct 13 16:52:33 kblu3 kernel: [ 1.416791] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.416799] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] Oct 13 16:52:33 kblu3 kernel: [ 1.416805] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] Oct 13 16:52:33 kblu3 kernel: [ 1.417579] pci 0000:00:05.0: [8086:1919] type 00 class 0x048000 Oct 13 16:52:33 kblu3 kernel: [ 1.417591] pci 0000:00:05.0: reg 0x10: [mem 0xb1000000-0xb13fffff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.418339] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 Oct 13 16:52:33 kblu3 kernel: [ 1.418353] pci 0000:00:08.0: reg 0x10: [mem 0xb155a000-0xb155afff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.419125] pci 0000:00:13.0: [8086:9d35] type 00 class 0x000000 Oct 13 16:52:33 kblu3 kernel: [ 1.419145] pci 0000:00:13.0: reg 0x10: [mem 0xb155b000-0xb155bfff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.419975] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 Oct 13 16:52:33 kblu3 kernel: [ 1.419996] pci 0000:00:14.0: reg 0x10: [mem 0xb1520000-0xb152ffff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.420076] pci 0000:00:14.0: PME# supported from D3hot D3cold Oct 13 16:52:33 kblu3 kernel: [ 1.420873] pci 0000:00:14.0: System wakeup disabled by ACPI Oct 13 16:52:33 kblu3 kernel: [ 1.420926] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 Oct 13 16:52:33 kblu3 kernel: [ 1.420946] pci 0000:00:14.2: reg 0x10: [mem 0xb155c000-0xb155cfff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.421759] pci 0000:00:14.3: [8086:9d32] type 00 class 0x048000 Oct 13 16:52:33 kblu3 kernel: [ 1.421847] pci 0000:00:14.3: reg 0x10: [mem 0xb1530000-0xb153ffff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.422979] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 Oct 13 16:52:33 kblu3 kernel: [ 1.423188] pci 0000:00:15.0: reg 0x10: [mem 0xb155d000-0xb155dfff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.424783] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 Oct 13 16:52:33 kblu3 kernel: [ 1.424991] pci 0000:00:15.1: reg 0x10: [mem 0xb155e000-0xb155efff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.426508] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 Oct 13 16:52:33 kblu3 kernel: [ 1.426532] pci 0000:00:16.0: reg 0x10: [mem 0xb155f000-0xb155ffff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.426619] pci 0000:00:16.0: PME# supported from D3hot Oct 13 16:52:33 kblu3 kernel: [ 1.427410] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 Oct 13 16:52:33 kblu3 kernel: [ 1.427427] pci 0000:00:17.0: reg 0x10: [mem 0xb1558000-0xb1559fff] Oct 13 16:52:33 kblu3 kernel: [ 1.427439] pci 0000:00:17.0: reg 0x14: [mem 0xb1565000-0xb15650ff] Oct 13 16:52:33 kblu3 kernel: [ 1.427448] pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087] Oct 13 16:52:33 kblu3 kernel: [ 1.427456] pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b] Oct 13 16:52:33 kblu3 kernel: [ 1.427464] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f] Oct 13 16:52:33 kblu3 kernel: [ 1.427473] pci 0000:00:17.0: reg 0x24: [mem 0xb1563000-0xb15637ff] Oct 13 16:52:33 kblu3 kernel: [ 1.427523] pci 0000:00:17.0: PME# supported from D3hot Oct 13 16:52:33 kblu3 kernel: [ 1.428308] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 Oct 13 16:52:33 kblu3 kernel: [ 1.428394] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Oct 13 16:52:33 kblu3 kernel: [ 1.429219] pci 0000:00:1c.0: System wakeup disabled by ACPI Oct 13 16:52:33 kblu3 kernel: [ 1.429382] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000 Oct 13 16:52:33 kblu3 kernel: [ 1.429591] pci 0000:00:1e.0: reg 0x10: [mem 0xb1560000-0xb1560fff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.431103] pci 0000:00:1e.4: [8086:9d2b] type 00 class 0x080501 Oct 13 16:52:33 kblu3 kernel: [ 1.431125] pci 0000:00:1e.4: reg 0x10: [mem 0xb1561000-0xb1561fff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.432029] pci 0000:00:1e.6: [8086:9d2d] type 00 class 0x080501 Oct 13 16:52:33 kblu3 kernel: [ 1.432049] pci 0000:00:1e.6: reg 0x10: [mem 0xb1562000-0xb1562fff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.432893] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 Oct 13 16:52:33 kblu3 kernel: [ 1.433744] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 Oct 13 16:52:33 kblu3 kernel: [ 1.433754] pci 0000:00:1f.2: reg 0x10: [mem 0xb1554000-0xb1557fff] Oct 13 16:52:33 kblu3 kernel: [ 1.434545] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040100 Oct 13 16:52:33 kblu3 kernel: [ 1.434568] pci 0000:00:1f.3: reg 0x10: [mem 0xb1550000-0xb1553fff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.434600] pci 0000:00:1f.3: reg 0x20: [mem 0xb1540000-0xb154ffff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.434656] pci 0000:00:1f.3: PME# supported from D3hot D3cold Oct 13 16:52:33 kblu3 kernel: [ 1.435403] pci 0000:00:1f.3: System wakeup disabled by ACPI Oct 13 16:52:33 kblu3 kernel: [ 1.435456] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 Oct 13 16:52:33 kblu3 kernel: [ 1.435497] pci 0000:00:1f.4: reg 0x10: [mem 0xb1564000-0xb15640ff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.435548] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] Oct 13 16:52:33 kblu3 kernel: [ 1.436357] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000 Oct 13 16:52:33 kblu3 kernel: [ 1.436376] pci 0000:00:1f.6: reg 0x10: [mem 0xb1500000-0xb151ffff] Oct 13 16:52:33 kblu3 kernel: [ 1.436473] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold Oct 13 16:52:33 kblu3 kernel: [ 1.437187] pci 0000:00:1f.6: System wakeup disabled by ACPI Oct 13 16:52:33 kblu3 kernel: [ 1.437648] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 Oct 13 16:52:33 kblu3 kernel: [ 1.437728] pci 0000:01:00.0: reg 0x10: [mem 0xb1400000-0xb1401fff 64bit] Oct 13 16:52:33 kblu3 kernel: [ 1.438189] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold Oct 13 16:52:33 kblu3 kernel: [ 1.438383] pci 0000:01:00.0: System wakeup disabled by ACPI Oct 13 16:52:33 kblu3 kernel: [ 1.448494] pci 0000:00:1c.0: PCI bridge to [bus 01] Oct 13 16:52:33 kblu3 kernel: [ 1.448502] pci 0000:00:1c.0: bridge window [mem 0xb1400000-0xb14fffff] Oct 13 16:52:33 kblu3 kernel: [ 1.454691] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) Oct 13 16:52:33 kblu3 kernel: [ 1.454764] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) Oct 13 16:52:33 kblu3 kernel: [ 1.454834] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) Oct 13 16:52:33 kblu3 kernel: [ 1.454903] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) Oct 13 16:52:33 kblu3 kernel: [ 1.454971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) Oct 13 16:52:33 kblu3 kernel: [ 1.455039] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) Oct 13 16:52:33 kblu3 kernel: [ 1.455107] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) Oct 13 16:52:33 kblu3 kernel: [ 1.455177] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) Oct 13 16:52:33 kblu3 kernel: [ 1.455877] ACPI: Enabled 3 GPEs in block 00 to 7F Oct 13 16:52:33 kblu3 kernel: [ 1.455943] ACPI : EC: EC stopped Oct 13 16:52:33 kblu3 kernel: [ 1.456127] ACPI : EC: GPE = 0x50, I/O: command/status = 0x66, data = 0x62 Oct 13 16:52:33 kblu3 kernel: [ 1.456131] ACPI : EC: EC started Oct 13 16:52:33 kblu3 kernel: [ 2.842633] initcall acpi_init+0x0/0x2ee returned 0 after 2375000 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842635] calling pnp_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842644] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842645] calling balloon_init+0x0/0x1ad @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842647] initcall balloon_init+0x0/0x1ad returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842650] calling xen_setup_shutdown_event+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842652] initcall xen_setup_shutdown_event+0x0/0x40 returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842653] calling xenbus_probe_backend_init+0x0/0x52 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842661] initcall xenbus_probe_backend_init+0x0/0x52 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842663] calling xenbus_probe_frontend_init+0x0/0x52 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842671] initcall xenbus_probe_frontend_init+0x0/0x52 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842672] calling xen_acpi_pad_init+0x0/0x4d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842674] initcall xen_acpi_pad_init+0x0/0x4d returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842675] calling balloon_init+0x0/0x8a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842677] initcall balloon_init+0x0/0x8a returned -19 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842678] calling pm8607_regulator_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842688] initcall pm8607_regulator_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842690] calling lp8788_buck_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842697] initcall lp8788_buck_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842699] calling lp8788_ldo_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842713] initcall lp8788_ldo_init+0x0/0x19 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842715] calling misc_init+0x0/0xc4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842721] initcall misc_init+0x0/0xc4 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842723] calling tpm_init+0x0/0x7e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842727] initcall tpm_init+0x0/0x7e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842730] calling vga_arb_device_init+0x0/0x1b7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842767] vgaarb: setting as boot device: PCI:0000:00:02.0 Oct 13 16:52:33 kblu3 kernel: [ 2.842773] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Oct 13 16:52:33 kblu3 kernel: [ 2.842781] vgaarb: loaded Oct 13 16:52:33 kblu3 kernel: [ 2.842785] vgaarb: bridge control possible 0000:00:02.0 Oct 13 16:52:33 kblu3 kernel: [ 2.842790] initcall vga_arb_device_init+0x0/0x1b7 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842793] calling cn_init+0x0/0xc0 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842800] initcall cn_init+0x0/0xc0 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842803] calling pm860x_i2c_init+0x0/0x2e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842810] initcall pm860x_i2c_init+0x0/0x2e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842812] calling wm8400_module_init+0x0/0x2e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842819] initcall wm8400_module_init+0x0/0x2e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842821] calling wm831x_i2c_init+0x0/0x2e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842828] initcall wm831x_i2c_init+0x0/0x2e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842830] calling wm831x_spi_init+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842837] initcall wm831x_spi_init+0x0/0x2a returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842839] calling wm8350_i2c_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842845] initcall wm8350_i2c_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842847] calling tps65910_i2c_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842854] initcall tps65910_i2c_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842856] calling tps80031_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842862] initcall tps80031_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842864] calling ezx_pcap_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842870] initcall ezx_pcap_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842872] calling da903x_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842878] initcall da903x_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842880] calling da9052_spi_init+0x0/0x2e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842886] initcall da9052_spi_init+0x0/0x2e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842888] calling da9052_i2c_init+0x0/0x2e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842895] initcall da9052_i2c_init+0x0/0x2e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842897] calling lp8788_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842903] initcall lp8788_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842906] calling da9055_i2c_init+0x0/0x2e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842912] initcall da9055_i2c_init+0x0/0x2e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842914] calling max8925_i2c_init+0x0/0x2e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842920] initcall max8925_i2c_init+0x0/0x2e returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842923] calling max8997_i2c_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842928] initcall max8997_i2c_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842930] calling max8998_i2c_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842935] initcall max8998_i2c_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842937] calling ab3100_i2c_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842944] initcall ab3100_i2c_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842945] calling tps6586x_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842950] initcall tps6586x_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842951] calling tps65090_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842955] initcall tps65090_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842956] calling aat2870_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842961] initcall aat2870_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842962] calling palmas_i2c_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842968] initcall palmas_i2c_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842969] calling rc5t583_i2c_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842974] initcall rc5t583_i2c_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842975] calling sec_pmic_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842981] initcall sec_pmic_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842982] calling as3711_i2c_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842987] initcall as3711_i2c_init+0x0/0x14 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842988] calling dma_buf_init+0x0/0xaf @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.842994] initcall dma_buf_init+0x0/0xaf returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.842996] calling init_scsi+0x0/0x9d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843041] SCSI subsystem initialized Oct 13 16:52:33 kblu3 kernel: [ 2.843045] initcall init_scsi+0x0/0x9d returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843046] calling ata_init+0x0/0x409 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843087] libata version 3.00 loaded. Oct 13 16:52:33 kblu3 kernel: [ 2.843089] initcall ata_init+0x0/0x409 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843091] calling phy_init+0x0/0x32 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843108] initcall phy_init+0x0/0x32 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843110] calling usb_init+0x0/0x166 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843113] ACPI: bus type USB registered Oct 13 16:52:33 kblu3 kernel: [ 2.843133] usbcore: registered new interface driver usbfs Oct 13 16:52:33 kblu3 kernel: [ 2.843145] usbcore: registered new interface driver hub Oct 13 16:52:33 kblu3 kernel: [ 2.843165] usbcore: registered new device driver usb Oct 13 16:52:33 kblu3 kernel: [ 2.843170] initcall usb_init+0x0/0x166 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843171] calling serio_init+0x0/0x2c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843179] initcall serio_init+0x0/0x2c returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843181] calling input_init+0x0/0x10a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843187] initcall input_init+0x0/0x10a returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843189] calling rtc_init+0x0/0x4f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843193] initcall rtc_init+0x0/0x4f returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843195] calling power_supply_class_init+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843199] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843201] calling hwmon_init+0x0/0xdd @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843206] initcall hwmon_init+0x0/0xdd returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843208] calling md_init+0x0/0x165 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843241] initcall md_init+0x0/0x165 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843243] calling mmc_init+0x0/0x3f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843259] initcall mmc_init+0x0/0x3f returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843261] calling leds_init+0x0/0x3c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843265] initcall leds_init+0x0/0x3c returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843267] calling dmi_init+0x0/0x11c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.843276] initcall dmi_init+0x0/0x11c returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.843278] calling efisubsys_init+0x0/0x29e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.851101] initcall efisubsys_init+0x0/0x29e returned 0 after 7812 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.851104] calling devfreq_init+0x0/0xa9 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.851129] initcall devfreq_init+0x0/0xa9 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.851132] calling devfreq_simple_ondemand_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.851134] initcall devfreq_simple_ondemand_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.851137] calling devfreq_performance_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.851139] initcall devfreq_performance_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.851141] calling devfreq_powersave_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.851144] initcall devfreq_powersave_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.851146] calling devfreq_userspace_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.851148] initcall devfreq_userspace_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.851150] calling ras_init+0x0/0x10 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.851155] initcall ras_init+0x0/0x10 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.851157] calling pci_subsys_init+0x0/0x48 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.851158] PCI: Using ACPI for IRQ routing Oct 13 16:52:33 kblu3 kernel: [ 2.880278] PCI: pci_cache_line_size set to 64 bytes Oct 13 16:52:33 kblu3 kernel: [ 2.880940] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] Oct 13 16:52:33 kblu3 kernel: [ 2.880941] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] Oct 13 16:52:33 kblu3 kernel: [ 2.880942] e820: reserve RAM buffer [mem 0x8cc48000-0x8fffffff] Oct 13 16:52:33 kblu3 kernel: [ 2.880944] e820: reserve RAM buffer [mem 0x8ce0e000-0x8fffffff] Oct 13 16:52:33 kblu3 kernel: [ 2.880945] e820: reserve RAM buffer [mem 0x8d300000-0x8fffffff] Oct 13 16:52:33 kblu3 kernel: [ 2.880946] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff] Oct 13 16:52:33 kblu3 kernel: [ 2.880948] initcall pci_subsys_init+0x0/0x48 returned 0 after 27343 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.880949] calling proto_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.880953] initcall proto_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.880954] calling net_dev_init+0x0/0x1bd @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881042] initcall net_dev_init+0x0/0x1bd returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881044] calling neigh_init+0x0/0x80 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881045] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881047] calling fib_rules_init+0x0/0xa8 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881049] initcall fib_rules_init+0x0/0xa8 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881050] calling pktsched_init+0x0/0x113 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881054] initcall pktsched_init+0x0/0x113 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881055] calling tc_filter_init+0x0/0x55 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881057] initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881058] calling tc_action_init+0x0/0x55 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881060] initcall tc_action_init+0x0/0x55 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881061] calling genl_init+0x0/0x87 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881065] initcall genl_init+0x0/0x87 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881067] calling ipv4_netfilter_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881069] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881071] calling cipso_v4_init+0x0/0x71 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881073] initcall cipso_v4_init+0x0/0x71 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881075] calling wireless_nlevent_init+0x0/0x39 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881078] initcall wireless_nlevent_init+0x0/0x39 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881079] calling netlbl_init+0x0/0x83 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881080] NetLabel: Initializing Oct 13 16:52:33 kblu3 kernel: [ 2.881085] NetLabel: domain hash size = 128 Oct 13 16:52:33 kblu3 kernel: [ 2.881088] NetLabel: protocols = UNLABELED CIPSOv4 Oct 13 16:52:33 kblu3 kernel: [ 2.881112] NetLabel: unlabeled traffic allowed by default Oct 13 16:52:33 kblu3 kernel: [ 2.881117] initcall netlbl_init+0x0/0x83 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881118] calling rfkill_init+0x0/0x85 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881148] initcall rfkill_init+0x0/0x85 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881150] calling xen_mcfg_late+0x0/0xd1 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881151] initcall xen_mcfg_late+0x0/0xd1 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881153] calling watchdog_init+0x0/0x77 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881184] initcall watchdog_init+0x0/0x77 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881206] calling nmi_warning_debugfs+0x0/0x27 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881209] initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881212] calling save_microcode_in_initrd+0x0/0x45 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881214] initcall save_microcode_in_initrd+0x0/0x45 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.881216] calling hpet_late_init+0x0/0xfd @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.881262] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 Oct 13 16:52:33 kblu3 kernel: [ 2.881271] hpet0: 8 comparators, 64-bit 24.000000 MHz counter Oct 13 16:52:33 kblu3 kernel: [ 2.883308] initcall hpet_late_init+0x0/0xfd returned 0 after 3906 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.883309] calling init_amd_nbs+0x0/0xa7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.883315] initcall init_amd_nbs+0x0/0xa7 returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.883318] calling clocksource_done_booting+0x0/0x42 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.883336] clocksource: Switched to clocksource hpet Oct 13 16:52:33 kblu3 kernel: [ 2.883354] initcall clocksource_done_booting+0x0/0x42 returned 0 after 19 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.883356] calling tracer_init_tracefs+0x0/0x1b3 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.884543] initcall tracer_init_tracefs+0x0/0x1b3 returned 0 after 1151 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.884546] calling init_trace_printk_function_export+0x0/0x32 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.884556] initcall init_trace_printk_function_export+0x0/0x32 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.884558] calling init_graph_tracefs+0x0/0x32 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.884571] initcall init_graph_tracefs+0x0/0x32 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.884573] calling event_trace_init+0x0/0x2df @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890432] initcall event_trace_init+0x0/0x2df returned 0 after 5703 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890435] calling init_kprobe_trace+0x0/0x96 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890451] initcall init_kprobe_trace+0x0/0x96 returned 0 after 5 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890453] calling init_uprobe_trace+0x0/0x54 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890465] initcall init_uprobe_trace+0x0/0x54 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890468] calling init_pipe_fs+0x0/0x47 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890493] initcall init_pipe_fs+0x0/0x47 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890496] calling cgroup_writeback_init+0x0/0x2d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890527] initcall cgroup_writeback_init+0x0/0x2d returned 0 after 24 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890529] calling inotify_user_setup+0x0/0x4b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890562] initcall inotify_user_setup+0x0/0x4b returned 0 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890564] calling eventpoll_init+0x0/0xda @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890585] initcall eventpoll_init+0x0/0xda returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890587] calling anon_inode_init+0x0/0x5f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890602] initcall anon_inode_init+0x0/0x5f returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890603] calling proc_locks_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890615] initcall proc_locks_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890616] calling dquot_init+0x0/0x120 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890620] VFS: Disk quotas dquot_6.6.0 Oct 13 16:52:33 kblu3 kernel: [ 2.890639] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 13 16:52:33 kblu3 kernel: [ 2.890652] initcall dquot_init+0x0/0x120 returned 0 after 30 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890653] calling quota_init+0x0/0x31 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890665] initcall quota_init+0x0/0x31 returned 0 after 7 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890667] calling proc_cmdline_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890679] initcall proc_cmdline_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890680] calling proc_consoles_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890693] initcall proc_consoles_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890694] calling proc_cpuinfo_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890703] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890704] calling proc_devices_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890716] initcall proc_devices_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890718] calling proc_interrupts_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890730] initcall proc_interrupts_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890731] calling proc_loadavg_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890743] initcall proc_loadavg_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890744] calling proc_meminfo_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890754] initcall proc_meminfo_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890755] calling proc_stat_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890767] initcall proc_stat_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890768] calling proc_uptime_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890780] initcall proc_uptime_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890782] calling proc_version_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890791] initcall proc_version_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890792] calling proc_softirqs_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890804] initcall proc_softirqs_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890806] calling proc_kcore_init+0x0/0x182 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890820] initcall proc_kcore_init+0x0/0x182 returned 0 after 6 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890822] calling vmcore_init+0x0/0x387 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890831] initcall vmcore_init+0x0/0x387 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890832] calling proc_kmsg_init+0x0/0x25 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890844] initcall proc_kmsg_init+0x0/0x25 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890846] calling proc_page_init+0x0/0x5f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890857] initcall proc_page_init+0x0/0x5f returned 0 after 6 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890860] calling init_ramfs_fs+0x0/0x20 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890869] initcall init_ramfs_fs+0x0/0x20 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890872] calling init_hugetlbfs_fs+0x0/0x160 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890906] initcall init_hugetlbfs_fs+0x0/0x160 returned 0 after 25 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890908] calling tomoyo_initerface_init+0x0/0x17b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890921] initcall tomoyo_initerface_init+0x0/0x17b returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890924] calling aa_create_aafs+0x0/0xc1 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890954] AppArmor: AppArmor Filesystem Enabled Oct 13 16:52:33 kblu3 kernel: [ 2.890968] initcall aa_create_aafs+0x0/0xc1 returned 0 after 34 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890969] calling blk_scsi_ioctl_init+0x0/0x2c5 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890982] initcall blk_scsi_ioctl_init+0x0/0x2c5 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890984] calling dynamic_debug_init_debugfs+0x0/0x69 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.890993] initcall dynamic_debug_init_debugfs+0x0/0x69 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.890995] calling fb_console_init+0x0/0x116 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.891028] initcall fb_console_init+0x0/0x116 returned 0 after 26 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.891030] calling simplefb_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.891055] initcall simplefb_init+0x0/0x14 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.891057] calling acpi_event_init+0x0/0x3d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.891075] initcall acpi_event_init+0x0/0x3d returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.891076] calling pnp_system_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.891088] initcall pnp_system_init+0x0/0x12 returned 0 after 6 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.891089] calling pnpacpi_init+0x0/0x74 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.891096] pnp: PnP ACPI init Oct 13 16:52:33 kblu3 kernel: [ 2.891250] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.891256] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.891260] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.891265] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved Oct 13 16:52:33 kblu3 kernel: [ 2.891269] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.891273] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.891277] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.891283] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.891636] system 00:01: [io 0x2000-0x20fe] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.891642] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.892199] system 00:02: [io 0x06a4] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892204] system 00:02: [io 0x06a0] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892210] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.892521] system 00:03: [io 0x0680-0x069f] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892525] system 00:03: [io 0xffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892529] system 00:03: [io 0xffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892533] system 00:03: [io 0xffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892537] system 00:03: [io 0x1800-0x18fe] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892541] system 00:03: [io 0x164e-0x164f] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892546] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.892643] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.892688] system 00:05: [io 0x1854-0x1857] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.892694] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.892801] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.892861] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.894043] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.894048] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.894053] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.895123] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895129] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895133] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895137] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895142] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895146] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895150] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895155] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895159] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895163] system 00:09: [mem 0x90000000-0x9001ffff] has been reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895168] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.895714] system 00:0a: [mem 0x00000000-0x0009cfff] could not be reserved Oct 13 16:52:33 kblu3 kernel: [ 2.895720] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) Oct 13 16:52:33 kblu3 kernel: [ 2.895958] pnp: PnP ACPI: found 11 devices Oct 13 16:52:33 kblu3 kernel: [ 2.895973] initcall pnpacpi_init+0x0/0x74 returned 0 after 4759 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.895975] calling chr_dev_init+0x0/0xad @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.900793] initcall chr_dev_init+0x0/0xad returned 0 after 4696 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.900796] calling firmware_class_init+0x0/0xec @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.900815] initcall firmware_class_init+0x0/0xec returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.900818] calling thermal_init+0x0/0xd2 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.900842] initcall thermal_init+0x0/0xd2 returned 0 after 15 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.900844] calling cpufreq_gov_performance_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.900856] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.900859] calling init_acpi_pm_clocksource+0x0/0xd7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.905367] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns Oct 13 16:52:33 kblu3 kernel: [ 2.905385] initcall init_acpi_pm_clocksource+0x0/0xd7 returned 0 after 4411 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.905387] calling pcibios_assign_resources+0x0/0xb4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.905413] pci 0000:00:1c.0: PCI bridge to [bus 01] Oct 13 16:52:33 kblu3 kernel: [ 2.905427] pci 0000:00:1c.0: bridge window [mem 0xb1400000-0xb14fffff] Oct 13 16:52:33 kblu3 kernel: [ 2.905447] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] Oct 13 16:52:33 kblu3 kernel: [ 2.905449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905450] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905452] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905453] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905454] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905455] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905456] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905458] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905459] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905460] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905461] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905462] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905464] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905465] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905466] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905467] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905469] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window] Oct 13 16:52:33 kblu3 kernel: [ 2.905470] pci_bus 0000:01: resource 1 [mem 0xb1400000-0xb14fffff] Oct 13 16:52:33 kblu3 kernel: [ 2.905482] initcall pcibios_assign_resources+0x0/0xb4 returned 0 after 83 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.905483] calling sysctl_core_init+0x0/0x2c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.905512] initcall sysctl_core_init+0x0/0x2c returned 0 after 20 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.905516] calling eth_offload_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.905528] initcall eth_offload_init+0x0/0x14 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.905530] calling inet_init+0x0/0x28a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.905550] NET: Registered protocol family 2 Oct 13 16:52:33 kblu3 kernel: [ 2.905716] TCP established hash table entries: 65536 (order: 7, 524288 bytes) Oct 13 16:52:33 kblu3 kernel: [ 2.905857] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 13 16:52:33 kblu3 kernel: [ 2.906029] TCP: Hash tables configured (established 65536 bind 65536) Oct 13 16:52:33 kblu3 kernel: [ 2.906056] UDP hash table entries: 4096 (order: 5, 131072 bytes) Oct 13 16:52:33 kblu3 kernel: [ 2.906085] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) Oct 13 16:52:33 kblu3 kernel: [ 2.906151] initcall inet_init+0x0/0x28a returned 0 after 597 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.906153] calling ipv4_offload_init+0x0/0x61 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.906166] initcall ipv4_offload_init+0x0/0x61 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.906168] calling af_unix_init+0x0/0x50 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.906175] NET: Registered protocol family 1 Oct 13 16:52:33 kblu3 kernel: [ 2.906189] initcall af_unix_init+0x0/0x50 returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.906192] calling ipv6_offload_init+0x0/0x83 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.906204] initcall ipv6_offload_init+0x0/0x83 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.906207] calling pci_apply_final_quirks+0x0/0x103 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.906228] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] Oct 13 16:52:33 kblu3 kernel: [ 2.906930] PCI: CLS 0 bytes, default 64 Oct 13 16:52:33 kblu3 kernel: [ 2.906936] initcall pci_apply_final_quirks+0x0/0x103 returned 0 after 703 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.906938] calling acpi_reserve_resources+0x0/0xeb @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.906951] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 2.906954] calling populate_rootfs+0x0/0x104 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 2.907001] Trying to unpack rootfs image as initramfs... Oct 13 16:52:33 kblu3 kernel: [ 3.712816] Freeing initrd memory: 38208K (ffff880033550000 - ffff880035aa0000) Oct 13 16:52:33 kblu3 kernel: [ 3.712840] initcall populate_rootfs+0x0/0x104 returned 0 after 786987 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.712843] calling pci_iommu_init+0x0/0x3c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.712903] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0 Oct 13 16:52:33 kblu3 kernel: [ 3.712919] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1 Oct 13 16:52:33 kblu3 kernel: [ 3.712926] DMAR: ACPI device "device:7b" under DMAR at fed91000 as 00:1e.0 Oct 13 16:52:33 kblu3 kernel: [ 3.712955] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Oct 13 16:52:33 kblu3 kernel: [ 3.712959] software IO TLB [mem 0x85b0b000-0x89b0b000] (64MB) mapped at [ffff880085b0b000-ffff880089b0afff] Oct 13 16:52:33 kblu3 kernel: [ 3.712974] initcall pci_iommu_init+0x0/0x3c returned 0 after 118 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.712977] calling calgary_fixup_tce_spaces+0x0/0xf2 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.712989] initcall calgary_fixup_tce_spaces+0x0/0xf2 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.712992] calling ir_dev_scope_init+0x0/0x34 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713005] initcall ir_dev_scope_init+0x0/0x34 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713029] calling ia32_binfmt_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713048] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713050] calling amd_uncore_init+0x0/0x1c8 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713063] initcall amd_uncore_init+0x0/0x1c8 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713064] calling amd_ibs_init+0x0/0x198 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713077] initcall amd_ibs_init+0x0/0x198 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713078] calling msr_init+0x0/0xc4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713095] initcall msr_init+0x0/0xc4 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713097] calling amd_iommu_pc_init+0x0/0x151 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713109] initcall amd_iommu_pc_init+0x0/0x151 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713111] calling intel_cqm_init+0x0/0x482 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713123] initcall intel_cqm_init+0x0/0x482 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713125] calling rapl_pmu_init+0x0/0x26b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713138] initcall rapl_pmu_init+0x0/0x26b returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713140] calling intel_uncore_init+0x0/0x2dd @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713152] initcall intel_uncore_init+0x0/0x2dd returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713154] calling cstate_pmu_init+0x0/0x161 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713167] initcall cstate_pmu_init+0x0/0x161 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713168] calling register_kernel_offset_dumper+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713180] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713182] calling i8259A_init_ops+0x0/0x24 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713194] initcall i8259A_init_ops+0x0/0x24 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713196] calling init_tsc_clocksource+0x0/0xb7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713213] initcall init_tsc_clocksource+0x0/0xb7 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713215] calling add_rtc_cmos+0x0/0xaa @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713227] initcall add_rtc_cmos+0x0/0xaa returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713229] calling i8237A_init_ops+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713250] initcall i8237A_init_ops+0x0/0x14 returned 0 after 12 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713252] calling thermal_throttle_init_device+0x0/0x82 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713286] initcall thermal_throttle_init_device+0x0/0x82 returned 0 after 25 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713288] calling ioapic_init_ops+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713300] initcall ioapic_init_ops+0x0/0x14 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713301] calling add_pcspkr+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713347] initcall add_pcspkr+0x0/0x40 returned 0 after 37 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713351] calling start_periodic_check_for_corruption+0x0/0x60 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713358] Scanning for low memory corruption every 60 seconds Oct 13 16:52:33 kblu3 kernel: [ 3.713377] initcall start_periodic_check_for_corruption+0x0/0x60 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713379] calling sysfb_init+0x0/0x6f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713435] initcall sysfb_init+0x0/0x6f returned 0 after 46 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713436] calling audit_classes_init+0x0/0xaf @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713454] initcall audit_classes_init+0x0/0xaf returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713456] calling crc32c_intel_mod_init+0x0/0x69 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713595] initcall crc32c_intel_mod_init+0x0/0x69 returned 0 after 127 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713597] calling pmc_atom_init+0x0/0x1c3 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713614] initcall pmc_atom_init+0x0/0x1c3 returned -19 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713616] calling iosf_mbi_init+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713647] initcall iosf_mbi_init+0x0/0x1b returned 0 after 21 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713649] calling proc_execdomains_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713666] initcall proc_execdomains_init+0x0/0x22 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713668] calling cpuhp_sysfs_init+0x0/0x6a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713694] initcall cpuhp_sysfs_init+0x0/0x6a returned 0 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713697] calling ioresources_init+0x0/0x3c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713714] initcall ioresources_init+0x0/0x3c returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713715] calling init_sched_debug_procfs+0x0/0x2c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713727] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713729] calling snapshot_device_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713822] initcall snapshot_device_init+0x0/0x12 returned 0 after 83 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713830] calling irq_gc_init_ops+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713844] initcall irq_gc_init_ops+0x0/0x14 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713846] calling irq_pm_init_ops+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713858] initcall irq_pm_init_ops+0x0/0x14 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713860] calling init_posix_timers+0x0/0x243 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713879] initcall init_posix_timers+0x0/0x243 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713880] calling init_posix_cpu_timers+0x0/0x96 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713893] initcall init_posix_cpu_timers+0x0/0x96 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713894] calling timekeeping_init_ops+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713907] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713908] calling init_clocksource_sysfs+0x0/0x69 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713954] initcall init_clocksource_sysfs+0x0/0x69 returned 0 after 37 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713956] calling init_timer_list_procfs+0x0/0x2c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.713969] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.713970] calling alarmtimer_init+0x0/0x168 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714023] initcall alarmtimer_init+0x0/0x168 returned 0 after 43 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714025] calling clockevents_init_sysfs+0x0/0xcb @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714157] initcall clockevents_init_sysfs+0x0/0xcb returned 0 after 121 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714159] calling init_tstats_procfs+0x0/0x2c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714172] initcall init_tstats_procfs+0x0/0x2c returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714173] calling futex_init+0x0/0xee @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714191] futex hash table entries: 2048 (order: 5, 131072 bytes) Oct 13 16:52:33 kblu3 kernel: [ 3.714222] initcall futex_init+0x0/0xee returned 0 after 39 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714224] calling proc_dma_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714236] initcall proc_dma_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714238] calling proc_modules_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714251] initcall proc_modules_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714253] calling kallsyms_init+0x0/0x25 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714265] initcall kallsyms_init+0x0/0x25 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714267] calling pid_namespaces_init+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714288] initcall pid_namespaces_init+0x0/0x40 returned 0 after 12 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714290] calling audit_init+0x0/0xf7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714300] audit: initializing netlink subsys (disabled) Oct 13 16:52:33 kblu3 kernel: [ 3.714330] audit: type=2000 audit(1476370349.700:1): initialized Oct 13 16:52:33 kblu3 kernel: [ 3.714344] initcall audit_init+0x0/0xf7 returned 0 after 44 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714345] calling audit_watch_init+0x0/0x3a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714358] initcall audit_watch_init+0x0/0x3a returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714360] calling audit_fsnotify_init+0x0/0x3a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714373] initcall audit_fsnotify_init+0x0/0x3a returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714374] calling audit_tree_init+0x0/0x49 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714387] initcall audit_tree_init+0x0/0x49 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714389] calling init_kprobes+0x0/0x1b5 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714700] initcall init_kprobes+0x0/0x1b5 returned 0 after 296 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714703] calling utsname_sysctl_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714723] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 11 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714725] calling init_tracepoints+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714737] initcall init_tracepoints+0x0/0x2a returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714739] calling init_lstats_procfs+0x0/0x25 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714752] initcall init_lstats_procfs+0x0/0x25 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714754] calling stack_trace_init+0x0/0xb0 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714773] initcall stack_trace_init+0x0/0xb0 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714775] calling init_mmio_trace+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714788] initcall init_mmio_trace+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714790] calling init_blk_tracer+0x0/0x58 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714804] initcall init_blk_tracer+0x0/0x58 returned 0 after 5 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714806] calling perf_event_sysfs_init+0x0/0x93 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714962] initcall perf_event_sysfs_init+0x0/0x93 returned 0 after 145 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714963] calling init_uprobes+0x0/0x63 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714976] initcall init_uprobes+0x0/0x63 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.714977] calling system_trusted_keyring_init+0x0/0x74 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.714984] Initialise system trusted keyrings Oct 13 16:52:33 kblu3 kernel: [ 3.714998] initcall system_trusted_keyring_init+0x0/0x74 returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715000] calling kswapd_init+0x0/0x6e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715109] initcall kswapd_init+0x0/0x6e returned 0 after 99 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715111] calling extfrag_debug_init+0x0/0x7a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715127] initcall extfrag_debug_init+0x0/0x7a returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715129] calling setup_vmstat+0x0/0x19a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715315] initcall setup_vmstat+0x0/0x19a returned 0 after 171 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715318] calling mm_compute_batch_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715386] initcall mm_compute_batch_init+0x0/0x19 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715388] calling slab_proc_init+0x0/0x25 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715404] initcall slab_proc_init+0x0/0x25 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715406] calling workingset_init+0x0/0x87 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715413] workingset: timestamp_bits=40 max_order=21 bucket_order=0 Oct 13 16:52:33 kblu3 kernel: [ 3.715427] initcall workingset_init+0x0/0x87 returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715429] calling proc_vmalloc_init+0x0/0x25 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715442] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715444] calling procswaps_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715456] initcall procswaps_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715458] calling init_frontswap+0x0/0x93 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.715484] initcall init_frontswap+0x0/0x93 returned 0 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.715487] calling slab_sysfs_init+0x0/0xf6 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717227] initcall slab_sysfs_init+0x0/0xf6 returned 0 after 1690 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717229] calling init_cleancache+0x0/0x93 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717248] initcall init_cleancache+0x0/0x93 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717250] calling zs_init+0x0/0xbc @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717277] initcall zs_init+0x0/0xbc returned 0 after 18 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717280] calling fcntl_init+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717297] initcall fcntl_init+0x0/0x2a returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717299] calling proc_filesystems_init+0x0/0x22 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717312] initcall proc_filesystems_init+0x0/0x22 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717315] calling start_dirtytime_writeback+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717328] initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717329] calling dio_init+0x0/0x2d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717341] initcall dio_init+0x0/0x2d returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717342] calling dnotify_init+0x0/0x7b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717359] initcall dnotify_init+0x0/0x7b returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717360] calling fanotify_user_setup+0x0/0x77 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717384] initcall fanotify_user_setup+0x0/0x77 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717387] calling aio_setup+0x0/0xa5 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717414] initcall aio_setup+0x0/0xa5 returned 0 after 19 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717415] calling init_sys32_ioctl+0x0/0x28 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717521] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 95 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717522] calling mbcache_init+0x0/0x31 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717566] initcall mbcache_init+0x0/0x31 returned 0 after 35 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717567] calling init_devpts_fs+0x0/0x28 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717587] initcall init_devpts_fs+0x0/0x28 returned 0 after 12 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717590] calling ext4_init_fs+0x0/0x189 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717713] initcall ext4_init_fs+0x0/0x189 returned 0 after 112 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717715] calling journal_init+0x0/0x104 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717870] initcall journal_init+0x0/0x104 returned 0 after 143 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717872] calling init_fat_fs+0x0/0x4a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717931] initcall init_fat_fs+0x0/0x4a returned 0 after 49 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717932] calling init_vfat_fs+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.717945] initcall init_vfat_fs+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.717947] calling ecryptfs_init+0x0/0x1ba @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718232] initcall ecryptfs_init+0x0/0x1ba returned 0 after 268 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718234] calling init_nls_cp437+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718247] initcall init_nls_cp437+0x0/0x14 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718248] calling fuse_init+0x0/0x1ad @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718256] fuse init (API version 7.25) Oct 13 16:52:33 kblu3 kernel: [ 3.718380] initcall fuse_init+0x0/0x1ad returned 0 after 120 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718382] calling init_pstore_fs+0x0/0x47 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718395] initcall init_pstore_fs+0x0/0x47 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718397] calling efivarfs_init+0x0/0x34 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718409] initcall efivarfs_init+0x0/0x34 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718411] calling ipc_init+0x0/0x17 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718428] initcall ipc_init+0x0/0x17 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718430] calling ipc_sysctl_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718455] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718457] calling init_mqueue_fs+0x0/0xa1 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718514] initcall init_mqueue_fs+0x0/0xa1 returned 0 after 46 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718516] calling key_proc_init+0x0/0x5e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718529] initcall key_proc_init+0x0/0x5e returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718531] calling big_key_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718539] Key type big_key registered Oct 13 16:52:33 kblu3 kernel: [ 3.718550] initcall big_key_init+0x0/0x12 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718552] calling selinux_nf_ip_init+0x0/0x47 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718565] initcall selinux_nf_ip_init+0x0/0x47 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718567] calling init_sel_fs+0x0/0x9a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718580] initcall init_sel_fs+0x0/0x9a returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718581] calling selnl_init+0x0/0x56 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718602] initcall selnl_init+0x0/0x56 returned 0 after 12 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718604] calling sel_netif_init+0x0/0x3a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718617] initcall sel_netif_init+0x0/0x3a returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718619] calling sel_netnode_init+0x0/0x32 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718632] initcall sel_netnode_init+0x0/0x32 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718634] calling sel_netport_init+0x0/0x32 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718647] initcall sel_netport_init+0x0/0x32 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718649] calling aurule_init+0x0/0x2d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718661] initcall aurule_init+0x0/0x2d returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718663] calling init_smk_fs+0x0/0x128 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718676] initcall init_smk_fs+0x0/0x128 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718679] calling crypto_algapi_init+0x0/0xd @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718697] initcall crypto_algapi_init+0x0/0xd returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718710] calling rsa_init+0x0/0x50 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718826] initcall rsa_init+0x0/0x50 returned 0 after 103 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718828] calling hmac_module_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.718844] initcall hmac_module_init+0x0/0x12 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.718847] calling crypto_null_mod_init+0x0/0x44 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.719301] initcall crypto_null_mod_init+0x0/0x44 returned 0 after 435 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.719303] calling md5_mod_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.719531] initcall md5_mod_init+0x0/0x12 returned 0 after 213 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.719534] calling sha1_generic_mod_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.719679] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 133 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.719680] calling sha256_generic_mod_init+0x0/0x17 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.719950] initcall sha256_generic_mod_init+0x0/0x17 returned 0 after 256 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.719951] calling sha512_generic_mod_init+0x0/0x17 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720217] initcall sha512_generic_mod_init+0x0/0x17 returned 0 after 252 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720219] calling crypto_ecb_module_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720231] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720232] calling crypto_cbc_module_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720244] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720245] calling aes_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720380] initcall aes_init+0x0/0x12 returned 0 after 124 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720381] calling crc32c_mod_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720530] initcall crc32c_mod_init+0x0/0x12 returned 0 after 137 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720531] calling crct10dif_mod_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720671] initcall crct10dif_mod_init+0x0/0x12 returned 0 after 128 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720672] calling lzo_mod_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720841] initcall lzo_mod_init+0x0/0x12 returned 0 after 158 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720843] calling asymmetric_key_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720850] Key type asymmetric registered Oct 13 16:52:33 kblu3 kernel: [ 3.720860] initcall asymmetric_key_init+0x0/0x12 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720861] calling x509_key_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720868] Asymmetric key parser 'x509' registered Oct 13 16:52:33 kblu3 kernel: [ 3.720878] initcall x509_key_init+0x0/0x12 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720880] calling proc_genhd_init+0x0/0x3c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720896] initcall proc_genhd_init+0x0/0x3c returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720897] calling bsg_init+0x0/0x12a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.720936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) Oct 13 16:52:33 kblu3 kernel: [ 3.720950] initcall bsg_init+0x0/0x12a returned 0 after 43 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.720951] calling throtl_init+0x0/0x44 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721079] initcall throtl_init+0x0/0x44 returned 0 after 117 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721080] calling noop_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721087] io scheduler noop registered Oct 13 16:52:33 kblu3 kernel: [ 3.721096] initcall noop_init+0x0/0x12 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721098] calling deadline_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721105] io scheduler deadline registered (default) Oct 13 16:52:33 kblu3 kernel: [ 3.721115] initcall deadline_init+0x0/0x12 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721116] calling cfq_init+0x0/0x7e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721129] io scheduler cfq registered Oct 13 16:52:33 kblu3 kernel: [ 3.721141] initcall cfq_init+0x0/0x7e returned 0 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721143] calling btree_module_init+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721156] initcall btree_module_init+0x0/0x2a returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721157] calling crc_t10dif_mod_init+0x0/0x3e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721169] initcall crc_t10dif_mod_init+0x0/0x3e returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721171] calling percpu_counter_startup+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721183] initcall percpu_counter_startup+0x0/0x19 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721185] calling digsig_init+0x0/0x3d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721197] initcall digsig_init+0x0/0x3d returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721198] calling sg_pool_init+0x0/0xcc @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721233] initcall sg_pool_init+0x0/0xcc returned 0 after 26 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721235] calling phy_core_init+0x0/0x4d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721251] initcall phy_core_init+0x0/0x4d returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721253] calling pci_proc_init+0x0/0x65 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721293] initcall pci_proc_init+0x0/0x65 returned 0 after 31 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721295] calling pcie_portdrv_init+0x0/0x77 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721628] initcall pcie_portdrv_init+0x0/0x77 returned 0 after 317 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721630] calling aer_service_init+0x0/0x3e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721692] aer 0000:00:1c.0:pcie002: service driver aer loaded Oct 13 16:52:33 kblu3 kernel: [ 3.721710] initcall aer_service_init+0x0/0x3e returned 0 after 69 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721712] calling pcie_pme_service_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721733] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt Oct 13 16:52:33 kblu3 kernel: [ 3.721737] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt Oct 13 16:52:33 kblu3 kernel: [ 3.721749] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded Oct 13 16:52:33 kblu3 kernel: [ 3.721761] initcall pcie_pme_service_init+0x0/0x12 returned 0 after 40 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721762] calling pci_hotplug_init+0x0/0x4a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721769] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 13 16:52:33 kblu3 kernel: [ 3.721781] initcall pci_hotplug_init+0x0/0x4a returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721782] calling pcied_init+0x0/0x6f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721793] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 13 16:52:33 kblu3 kernel: [ 3.721804] initcall pcied_init+0x0/0x6f returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721805] calling imsttfb_init+0x0/0xf6 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721830] initcall imsttfb_init+0x0/0xf6 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721832] calling asiliantfb_init+0x0/0x34 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721854] initcall asiliantfb_init+0x0/0x34 returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721855] calling vesafb_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721881] initcall vesafb_driver_init+0x0/0x14 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.721882] calling efifb_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.721896] efifb: probing for efifb Oct 13 16:52:33 kblu3 kernel: [ 3.721915] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k Oct 13 16:52:33 kblu3 kernel: [ 3.721919] efifb: mode is 1920x1080x32, linelength=7680, pages=1 Oct 13 16:52:33 kblu3 kernel: [ 3.721922] efifb: scrolling: redraw Oct 13 16:52:33 kblu3 kernel: [ 3.721926] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Oct 13 16:52:33 kblu3 kernel: [ 3.727182] Console: switching to colour frame buffer device 240x67 Oct 13 16:52:33 kblu3 kernel: [ 3.732318] fb0: EFI VGA frame buffer device Oct 13 16:52:33 kblu3 kernel: [ 3.732352] initcall efifb_driver_init+0x0/0x14 returned 0 after 10215 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.732354] calling intel_idle_init+0x0/0x5e0 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.732362] intel_idle: MWAIT substates: 0x11142120 Oct 13 16:52:33 kblu3 kernel: [ 3.732363] intel_idle: v0.4.1 model 0x8E Oct 13 16:52:33 kblu3 kernel: [ 3.732610] intel_idle: lapic_timer_reliable_states 0xffffffff Oct 13 16:52:33 kblu3 kernel: [ 3.732622] initcall intel_idle_init+0x0/0x5e0 returned 0 after 253 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.732624] calling ipmi_init_msghandler_mod+0x0/0xd @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.732639] ipmi message handler version 39.2 Oct 13 16:52:33 kblu3 kernel: [ 3.732670] initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 36 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.732673] calling acpi_ac_init+0x0/0x2e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.732779] ACPI: AC Adapter [ADP1] (on-line) Oct 13 16:52:33 kblu3 kernel: [ 3.732820] initcall acpi_ac_init+0x0/0x2e returned 0 after 134 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.732822] calling acpi_button_driver_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.732878] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:00/PNP0C0D:00/input/input0 Oct 13 16:52:33 kblu3 kernel: [ 3.733139] ACPI: Lid Switch [LID0] Oct 13 16:52:33 kblu3 kernel: [ 3.733223] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 Oct 13 16:52:33 kblu3 kernel: [ 3.733260] ACPI: Power Button [PWRB] Oct 13 16:52:33 kblu3 kernel: [ 3.733311] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 Oct 13 16:52:33 kblu3 kernel: [ 3.733346] ACPI: Sleep Button [SLPB] Oct 13 16:52:33 kblu3 kernel: [ 3.733414] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Oct 13 16:52:33 kblu3 kernel: [ 3.733445] ACPI: Power Button [PWRF] Oct 13 16:52:33 kblu3 kernel: [ 3.733485] initcall acpi_button_driver_init+0x0/0x12 returned 0 after 637 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.733488] calling acpi_fan_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.786796] random: fast init done Oct 13 16:52:33 kblu3 kernel: [ 3.873062] initcall acpi_fan_driver_init+0x0/0x14 returned 0 after 136293 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.873065] calling acpi_processor_driver_init+0x0/0x44 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 3.873420] initcall acpi_processor_driver_init+0x0/0x44 returned 0 after 335 usecs Oct 13 16:52:33 kblu3 kernel: [ 3.873423] calling acpi_thermal_init+0x0/0x76 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.049092] thermal LNXTHERM:00: registered as thermal_zone0 Oct 13 16:52:33 kblu3 kernel: [ 4.049133] ACPI: Thermal Zone [TZ00] (31 C) Oct 13 16:52:33 kblu3 kernel: [ 4.050398] thermal LNXTHERM:01: registered as thermal_zone1 Oct 13 16:52:33 kblu3 kernel: [ 4.050424] ACPI: Thermal Zone [TZ01] (30 C) Oct 13 16:52:33 kblu3 kernel: [ 4.050463] initcall acpi_thermal_init+0x0/0x76 returned 0 after 172878 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050464] calling acpi_battery_init+0x0/0x2c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050480] initcall acpi_battery_init+0x0/0x2c returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050482] calling acpi_hed_driver_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050535] initcall acpi_hed_driver_init+0x0/0x12 returned 0 after 43 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050536] calling bgrt_init+0x0/0x7a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050552] initcall bgrt_init+0x0/0x7a returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050554] calling erst_init+0x0/0x2d9 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050566] initcall erst_init+0x0/0x2d9 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050567] calling ghes_init+0x0/0x194 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050574] GHES: HEST is not enabled! Oct 13 16:52:33 kblu3 kernel: [ 4.050600] initcall ghes_init+0x0/0x194 returned -22 after 25 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050602] calling virtio_mmio_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050627] initcall virtio_mmio_init+0x0/0x14 returned 0 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050629] calling virtio_pci_driver_init+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050658] initcall virtio_pci_driver_init+0x0/0x1b returned 0 after 20 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050659] calling virtio_balloon_driver_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050680] initcall virtio_balloon_driver_init+0x0/0x12 returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050682] calling xenbus_probe_initcall+0x0/0x50 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050694] initcall xenbus_probe_initcall+0x0/0x50 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050696] calling xenbus_init+0x0/0x3b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050708] initcall xenbus_init+0x0/0x3b returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050709] calling xenbus_backend_init+0x0/0x4d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050722] initcall xenbus_backend_init+0x0/0x4d returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050724] calling hypervisor_subsys_init+0x0/0x27 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050737] initcall hypervisor_subsys_init+0x0/0x27 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050738] calling hyper_sysfs_init+0x0/0x158 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050750] initcall hyper_sysfs_init+0x0/0x158 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050752] calling platform_pci_init+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050766] ACPI: Battery Slot [BAT0] (battery present) Oct 13 16:52:33 kblu3 kernel: [ 4.050777] initcall platform_pci_init+0x0/0x1b returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050778] calling xen_late_init_mcelog+0x0/0x54 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050790] initcall xen_late_init_mcelog+0x0/0x54 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050792] calling xen_acpi_processor_init+0x0/0x206 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050804] initcall xen_acpi_processor_init+0x0/0x206 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050806] calling lp872x_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050825] initcall lp872x_driver_init+0x0/0x14 returned 0 after 11 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050827] calling pty_init+0x0/0x3a2 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050916] initcall pty_init+0x0/0x3a2 returned 0 after 79 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050917] calling sysrq_init+0x0/0x78 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050935] initcall sysrq_init+0x0/0x78 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050937] calling xen_hvc_init+0x0/0x23f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050956] initcall xen_hvc_init+0x0/0x23f returned -19 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.050958] calling serial8250_init+0x0/0x157 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.050974] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Oct 13 16:52:33 kblu3 kernel: [ 4.051122] ACPI: Battery Slot [BAT1] (battery absent) Oct 13 16:52:33 kblu3 kernel: [ 4.051530] ACPI: Battery Slot [BAT2] (battery absent) Oct 13 16:52:33 kblu3 kernel: [ 4.071805] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A Oct 13 16:52:33 kblu3 kernel: [ 4.074650] initcall serial8250_init+0x0/0x157 returned 0 after 23119 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.074652] calling serial_pci_driver_init+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.074691] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 30 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.074693] calling max310x_uart_init+0x0/0x35 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.074717] initcall max310x_uart_init+0x0/0x35 returned 0 after 15 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.074718] calling sccnxp_uart_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.074740] initcall sccnxp_uart_driver_init+0x0/0x14 returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.074742] calling init_kgdboc+0x0/0x16 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.074754] initcall init_kgdboc+0x0/0x16 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.074756] calling ttyprintk_init+0x0/0xff @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.074833] initcall ttyprintk_init+0x0/0xff returned 0 after 67 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.074835] calling init+0x0/0x104 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.074870] initcall init+0x0/0x104 returned 0 after 26 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.074872] calling hpet_init+0x0/0x65 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075054] initcall hpet_init+0x0/0x65 returned 0 after 169 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075056] calling hwrng_modinit+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075132] initcall hwrng_modinit+0x0/0x12 returned 0 after 66 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075134] calling agp_init+0x0/0x29 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075141] Linux agpgart interface v0.103 Oct 13 16:52:33 kblu3 kernel: [ 4.075171] initcall agp_init+0x0/0x29 returned 0 after 28 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075173] calling agp_amd64_mod_init+0x0/0x21 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075213] initcall agp_amd64_mod_init+0x0/0x21 returned -19 after 30 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075214] calling agp_intel_init+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075240] initcall agp_intel_init+0x0/0x2a returned 0 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075242] calling agp_via_init+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075267] initcall agp_via_init+0x0/0x2a returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075268] calling init_tis+0x0/0xcf @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075363] initcall init_tis+0x0/0xcf returned 0 after 84 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075365] calling drm_kms_helper_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075378] initcall drm_kms_helper_init+0x0/0x14 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075380] calling drm_core_init+0x0/0xbd @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075394] [drm] Initialized Oct 13 16:52:33 kblu3 kernel: [ 4.075418] initcall drm_core_init+0x0/0xbd returned 0 after 28 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075420] calling cn_proc_init+0x0/0x38 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075433] initcall cn_proc_init+0x0/0x38 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075437] calling topology_sysfs_init+0x0/0x80 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075472] initcall topology_sysfs_init+0x0/0x80 returned 0 after 26 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075475] calling cacheinfo_sysfs_init+0x0/0x8a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075802] initcall cacheinfo_sysfs_init+0x0/0x8a returned 0 after 311 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075804] calling devcoredump_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.075822] initcall devcoredump_init+0x0/0x19 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.075824] calling brd_init+0x0/0x15c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.080857] brd: module loaded Oct 13 16:52:33 kblu3 kernel: [ 4.080888] initcall brd_init+0x0/0x15c returned 0 after 4934 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.080891] calling loop_init+0x0/0x14d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083302] loop: module loaded Oct 13 16:52:33 kblu3 kernel: [ 4.083370] initcall loop_init+0x0/0x14d returned 0 after 2401 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083372] calling init+0x0/0x80 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083418] initcall init+0x0/0x80 returned 0 after 31 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083421] calling xlblk_init+0x0/0xdf @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083455] initcall xlblk_init+0x0/0xdf returned -19 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083458] calling htcpld_core_init+0x0/0x2d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083495] initcall htcpld_core_init+0x0/0x2d returned -19 after 25 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083498] calling wm8994_i2c_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083517] initcall wm8994_i2c_driver_init+0x0/0x14 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083520] calling tps65912_i2c_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083539] initcall tps65912_i2c_driver_init+0x0/0x14 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083541] calling tps65912_spi_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083560] initcall tps65912_spi_driver_init+0x0/0x14 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083563] calling twl6040_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083582] initcall twl6040_driver_init+0x0/0x14 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083584] calling smsc_i2c_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083603] initcall smsc_i2c_driver_init+0x0/0x14 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083606] calling da9063_i2c_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083626] initcall da9063_i2c_driver_init+0x0/0x14 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083628] calling max77693_i2c_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083647] initcall max77693_i2c_driver_init+0x0/0x14 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083648] calling adp5520_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083666] initcall adp5520_driver_init+0x0/0x14 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083667] calling intel_soc_pmic_i2c_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083686] initcall intel_soc_pmic_i2c_driver_init+0x0/0x14 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083687] calling spi_transport_init+0x0/0x76 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083707] initcall spi_transport_init+0x0/0x76 returned 0 after 11 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083708] calling init_sd+0x0/0x173 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083737] initcall init_sd+0x0/0x173 returned 0 after 21 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083739] calling init_sr+0x0/0x43 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083756] initcall init_sr+0x0/0x43 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083757] calling init_sg+0x0/0x122 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083782] initcall init_sg+0x0/0x122 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083783] calling piix_init+0x0/0x29 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083816] initcall piix_init+0x0/0x29 returned 0 after 24 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083818] calling sis_pci_driver_init+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083844] initcall sis_pci_driver_init+0x0/0x1b returned 0 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083845] calling ata_generic_pci_driver_init+0x0/0x1b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083871] initcall ata_generic_pci_driver_init+0x0/0x1b returned 0 after 18 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083873] calling net_olddevs_init+0x0/0x5b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083889] initcall net_olddevs_init+0x0/0x5b returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083890] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083955] initcall phy_module_init+0x0/0x19 returned 0 after 55 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083956] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.083988] initcall phy_module_init+0x0/0x19 returned 0 after 23 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.083989] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084010] initcall phy_module_init+0x0/0x19 returned 0 after 12 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084011] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084042] initcall phy_module_init+0x0/0x19 returned 0 after 22 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084043] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084061] initcall phy_module_init+0x0/0x19 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084062] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084100] initcall phy_module_init+0x0/0x19 returned 0 after 29 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084102] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084148] initcall phy_module_init+0x0/0x19 returned 0 after 38 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084149] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084213] initcall phy_module_init+0x0/0x19 returned 0 after 54 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084214] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084238] initcall phy_module_init+0x0/0x19 returned 0 after 15 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084239] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084267] initcall phy_module_init+0x0/0x19 returned 0 after 20 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084268] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084305] initcall phy_module_init+0x0/0x19 returned 0 after 28 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084306] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084324] initcall phy_module_init+0x0/0x19 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084326] calling fixed_mdio_bus_init+0x0/0xc4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084373] libphy: Fixed MDIO Bus: probed Oct 13 16:52:33 kblu3 kernel: [ 4.084404] initcall fixed_mdio_bus_init+0x0/0xc4 returned 0 after 68 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084406] calling mdio_gpio_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084427] initcall mdio_gpio_driver_init+0x0/0x14 returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084428] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084447] initcall phy_module_init+0x0/0x19 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084448] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084472] initcall phy_module_init+0x0/0x19 returned 0 after 15 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084473] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084550] initcall phy_module_init+0x0/0x19 returned 0 after 67 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084552] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084580] initcall phy_module_init+0x0/0x19 returned 0 after 19 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084581] calling phy_module_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084599] initcall phy_module_init+0x0/0x19 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084601] calling tun_init+0x0/0xa0 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084608] tun: Universal TUN/TAP device driver, 1.6 Oct 13 16:52:33 kblu3 kernel: [ 4.084631] tun: (C) 1999-2004 Max Krasnyansky Oct 13 16:52:33 kblu3 kernel: [ 4.084791] initcall tun_init+0x0/0xa0 returned 0 after 176 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084793] calling virtio_net_driver_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084814] initcall virtio_net_driver_init+0x0/0x12 returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084816] calling ppp_init+0x0/0x115 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084823] PPP generic driver version 2.4.2 Oct 13 16:52:33 kblu3 kernel: [ 4.084966] initcall ppp_init+0x0/0x115 returned 0 after 138 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084968] calling netif_init+0x0/0x68 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.084980] initcall netif_init+0x0/0x68 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.084982] calling cdrom_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085000] initcall cdrom_init+0x0/0x19 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085001] calling dwc2_platform_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085026] initcall dwc2_platform_driver_init+0x0/0x14 returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085028] calling ohci_hcd_mod_init+0x0/0x95 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085035] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 13 16:52:33 kblu3 kernel: [ 4.085074] initcall ohci_hcd_mod_init+0x0/0x95 returned 0 after 38 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085076] calling ohci_pci_init+0x0/0x69 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085083] ohci-pci: OHCI PCI platform driver Oct 13 16:52:33 kblu3 kernel: [ 4.085124] initcall ohci_pci_init+0x0/0x69 returned 0 after 39 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085126] calling ohci_platform_init+0x0/0x4c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085133] ohci-platform: OHCI generic platform driver Oct 13 16:52:33 kblu3 kernel: [ 4.085173] initcall ohci_platform_init+0x0/0x4c returned 0 after 38 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085175] calling uhci_hcd_init+0x0/0x11d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085182] uhci_hcd: USB Universal Host Controller Interface driver Oct 13 16:52:33 kblu3 kernel: [ 4.085238] initcall uhci_hcd_init+0x0/0x11d returned 0 after 53 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085240] calling kgdbdbgp_start_thread+0x0/0x52 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085252] initcall kgdbdbgp_start_thread+0x0/0x52 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085254] calling i8042_init+0x0/0x413 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085287] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085317] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Oct 13 16:52:33 kblu3 kernel: [ 4.085846] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085925] initcall i8042_init+0x0/0x413 returned 0 after 647 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085927] calling input_leds_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.085939] initcall input_leds_init+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.085941] calling mousedev_init+0x0/0x85 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.086167] mousedev: PS/2 mouse device common for all mice Oct 13 16:52:33 kblu3 kernel: [ 4.086202] initcall mousedev_init+0x0/0x85 returned 0 after 246 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.086204] calling evdev_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.086599] initcall evdev_init+0x0/0x12 returned 0 after 377 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.086601] calling atkbd_init+0x0/0x27 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.086627] initcall atkbd_init+0x0/0x27 returned 0 after 17 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.086628] calling uinput_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.086728] initcall uinput_init+0x0/0x12 returned 0 after 89 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.086730] calling cmos_init+0x0/0x73 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.086757] rtc_cmos 00:04: RTC can wake from S4 Oct 13 16:52:33 kblu3 kernel: [ 4.087214] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 Oct 13 16:52:33 kblu3 kernel: [ 4.087376] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Oct 13 16:52:33 kblu3 kernel: [ 4.087424] initcall cmos_init+0x0/0x73 returned 0 after 669 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.087426] calling dm_init+0x0/0x46 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.087484] device-mapper: uevent: version 1.0.3 Oct 13 16:52:33 kblu3 kernel: [ 4.088991] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com Oct 13 16:52:33 kblu3 kernel: [ 4.090429] initcall dm_init+0x0/0x46 returned 0 after 2923 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.090431] calling cpufreq_gov_powersave_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.090444] initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.090446] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.090459] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.090461] calling cpufreq_gov_dbs_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.090474] initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.090475] calling cpufreq_gov_dbs_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.090488] initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.090490] calling intel_pstate_init+0x0/0x429 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.090497] intel_pstate: Intel P-state driver initializing Oct 13 16:52:33 kblu3 kernel: [ 4.092343] intel_pstate: HWP enabled Oct 13 16:52:33 kblu3 kernel: [ 4.093237] initcall intel_pstate_init+0x0/0x429 returned 0 after 2674 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.093238] calling ledtrig_cpu_init+0x0/0xc5 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.093455] ledtrig-cpu: registered to indicate activity on CPUs Oct 13 16:52:33 kblu3 kernel: [ 4.094367] initcall ledtrig_cpu_init+0x0/0xc5 returned 0 after 1094 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.094369] calling efivars_sysfs_init+0x0/0x230 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.094376] EFI Variables Facility v0.08 2004-May-17 Oct 13 16:52:33 kblu3 kernel: [ 4.103405] initcall efivars_sysfs_init+0x0/0x230 returned 0 after 8811 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103407] calling esrt_sysfs_init+0x0/0x34d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103421] initcall esrt_sysfs_init+0x0/0x34d returned -38 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103422] calling gpio_clk_driver_init+0x0/0x14 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103442] initcall gpio_clk_driver_init+0x0/0x14 returned 0 after 11 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103443] calling extcon_class_init+0x0/0x17 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103456] initcall extcon_class_init+0x0/0x17 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103457] calling powercap_init+0x0/0x289 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103490] initcall powercap_init+0x0/0x289 returned 0 after 24 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103492] calling pm_check_save_msr+0x0/0x20 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103504] initcall pm_check_save_msr+0x0/0x20 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103505] calling sock_diag_init+0x0/0x37 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103548] initcall sock_diag_init+0x0/0x37 returned 0 after 34 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103549] calling blackhole_init+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103584] initcall blackhole_init+0x0/0x12 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103586] calling gre_offload_init+0x0/0x47 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103603] initcall gre_offload_init+0x0/0x47 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103604] calling sysctl_ipv4_init+0x0/0x4e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103653] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 39 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103654] calling cubictcp_register+0x0/0x59 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103666] initcall cubictcp_register+0x0/0x59 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.103667] calling inet6_init+0x0/0x337 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.103730] NET: Registered protocol family 10 Oct 13 16:52:33 kblu3 kernel: [ 4.104960] initcall inet6_init+0x0/0x337 returned 0 after 1254 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.104961] calling packet_init+0x0/0x42 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.104970] NET: Registered protocol family 17 Oct 13 16:52:33 kblu3 kernel: [ 4.105875] initcall packet_init+0x0/0x42 returned 0 after 885 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.105876] calling dcbnl_init+0x0/0x4d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.105888] initcall dcbnl_init+0x0/0x4d returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.105890] calling init_dns_resolver+0x0/0xe7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.105900] Key type dns_resolver registered Oct 13 16:52:33 kblu3 kernel: [ 4.106790] initcall init_dns_resolver+0x0/0xe7 returned 0 after 871 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.106792] calling mcheck_init_device+0x0/0x17b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.106955] initcall mcheck_init_device+0x0/0x17b returned 0 after 151 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.106985] calling tboot_late_init+0x0/0x2b4 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.106999] initcall tboot_late_init+0x0/0x2b4 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.107000] calling mcheck_late_init+0x0/0x34 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.107016] initcall mcheck_late_init+0x0/0x34 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.107017] calling severities_debugfs_init+0x0/0x3d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.107029] initcall severities_debugfs_init+0x0/0x3d returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.107030] calling threshold_init_device+0x0/0x45 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.107042] initcall threshold_init_device+0x0/0x45 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.107044] calling microcode_init+0x0/0x1b8 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.107066] microcode: sig=0x806e9, pf=0x40, revision=0x30 Oct 13 16:52:33 kblu3 kernel: [ 4.108190] microcode: Microcode Update Driver: v2.01 , Peter Oruba Oct 13 16:52:33 kblu3 kernel: [ 4.109112] initcall microcode_init+0x0/0x1b8 returned 0 after 2012 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109114] calling hpet_insert_resource+0x0/0x24 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109126] initcall hpet_insert_resource+0x0/0x24 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109127] calling update_mp_table+0x0/0x43d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109138] initcall update_mp_table+0x0/0x43d returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109139] calling lapic_insert_resource+0x0/0x3f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109148] initcall lapic_insert_resource+0x0/0x3f returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109149] calling print_ICs+0x0/0x1be @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109157] initcall print_ICs+0x0/0x1be returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109159] calling pat_memtype_list_init+0x0/0x35 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109171] initcall pat_memtype_list_init+0x0/0x35 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109172] calling create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109184] initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109186] calling init_oops_id+0x0/0x40 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109198] initcall init_oops_id+0x0/0x40 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109199] calling sched_init_debug+0x0/0x24 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109216] initcall sched_init_debug+0x0/0x24 returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109218] calling pm_qos_power_init+0x0/0xb7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109646] initcall pm_qos_power_init+0x0/0xb7 returned 0 after 410 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109647] calling pm_debugfs_init+0x0/0x24 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109679] initcall pm_debugfs_init+0x0/0x24 returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109680] calling printk_late_init+0x0/0x75 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109693] initcall printk_late_init+0x0/0x75 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109695] calling tk_debug_sleep_time_init+0x0/0x3c @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109707] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109708] calling debugfs_kprobe_init+0x0/0xa7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109725] initcall debugfs_kprobe_init+0x0/0xa7 returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.109726] calling taskstats_init+0x0/0x6e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.109735] registered taskstats version 1 Oct 13 16:52:33 kblu3 kernel: [ 4.110610] initcall taskstats_init+0x0/0x6e returned 0 after 855 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.110611] calling clear_boot_tracer+0x0/0x30 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.110623] initcall clear_boot_tracer+0x0/0x30 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.110624] calling kdb_ftrace_register+0x0/0x32 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.110636] initcall kdb_ftrace_register+0x0/0x32 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.110637] calling load_system_certificate_list+0x0/0x101 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.110640] Loading compiled-in X.509 certificates Oct 13 16:52:33 kblu3 kernel: [ 4.113951] Loaded X.509 cert 'Build time autogenerated kernel key: fcaecbe7c78dcfe959322041cb4c3dc4a5cd43cd' Oct 13 16:52:33 kblu3 kernel: [ 4.114875] initcall load_system_certificate_list+0x0/0x101 returned 0 after 4133 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.114876] calling fault_around_debugfs+0x0/0x35 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.114889] initcall fault_around_debugfs+0x0/0x35 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.114890] calling max_swapfiles_check+0x0/0x8 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.114902] initcall max_swapfiles_check+0x0/0x8 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.114903] calling split_huge_pages_debugfs+0x0/0x35 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.114916] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.114917] calling check_early_ioremap_leak+0x0/0x42 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.114929] initcall check_early_ioremap_leak+0x0/0x42 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.114931] calling init_root_keyring+0x0/0xb @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.114952] initcall init_root_keyring+0x0/0xb returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.114953] calling big_key_crypto_init+0x0/0x9e @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.116417] initcall big_key_crypto_init+0x0/0x9e returned -14 after 1420 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.116418] calling init_trusted+0x0/0xba @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.118368] Key type trusted registered Oct 13 16:52:33 kblu3 kernel: [ 4.119320] initcall init_trusted+0x0/0xba returned 0 after 2826 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.119321] calling init_encrypted+0x0/0x11b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.122963] Key type encrypted registered Oct 13 16:52:33 kblu3 kernel: [ 4.123382] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 Oct 13 16:52:33 kblu3 kernel: [ 4.124969] initcall init_encrypted+0x0/0x11b returned 0 after 5474 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.124971] calling init_profile_hash+0x0/0x7d @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.124979] AppArmor: AppArmor sha1 policy hashing enabled Oct 13 16:52:33 kblu3 kernel: [ 4.125892] initcall init_profile_hash+0x0/0x7d returned 0 after 892 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.125894] calling init_ima+0x0/0x31 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.125908] ima: No TPM chip found, activating TPM-bypass! Oct 13 16:52:33 kblu3 kernel: [ 4.126820] initcall init_ima+0x0/0x31 returned 0 after 896 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.126821] calling init_evm+0x0/0x55 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.126828] evm: HMAC attrs: 0x1 Oct 13 16:52:33 kblu3 kernel: [ 4.127819] initcall init_evm+0x0/0x55 returned 0 after 966 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.127820] calling prandom_reseed+0x0/0x2f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.127839] initcall prandom_reseed+0x0/0x2f returned 0 after 11 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.127840] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.127853] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.127854] calling pci_sysfs_init+0x0/0x49 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.129172] initcall pci_sysfs_init+0x0/0x49 returned 0 after 1280 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.129174] calling bert_init+0x0/0x1e2 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.129185] initcall bert_init+0x0/0x1e2 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.129186] calling boot_wait_for_devices+0x0/0x29 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.129195] initcall boot_wait_for_devices+0x0/0x29 returned -19 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.129196] calling dmar_free_unused_resources+0x0/0xb5 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.129208] initcall dmar_free_unused_resources+0x0/0xb5 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.129210] calling deferred_probe_initcall+0x0/0x70 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.129446] initcall deferred_probe_initcall+0x0/0x70 returned 0 after 223 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.129462] calling late_resume_init+0x0/0x1a0 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.129480] Magic number: 4:824:889 Oct 13 16:52:33 kblu3 kernel: [ 4.130425] pci 0000:00:1f.2: hash matches Oct 13 16:52:33 kblu3 kernel: [ 4.131433] initcall late_resume_init+0x0/0x1a0 returned 0 after 1918 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.131434] calling rtc_hctosys+0x0/0xe7 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.131686] rtc_cmos 00:04: setting system clock to 2016-10-13 14:52:30 UTC (1476370350) Oct 13 16:52:33 kblu3 kernel: [ 4.132633] initcall rtc_hctosys+0x0/0xe7 returned 0 after 1164 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.132635] calling charger_manager_init+0x0/0x9b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.132758] initcall charger_manager_init+0x0/0x9b returned 0 after 112 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.132759] calling acpi_cpufreq_init+0x0/0x27a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.132776] initcall acpi_cpufreq_init+0x0/0x27a returned -17 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.132778] calling powernowk8_init+0x0/0x180 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.132794] initcall powernowk8_init+0x0/0x180 returned -19 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.132796] calling pcc_cpufreq_init+0x0/0x4b6 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.132813] initcall pcc_cpufreq_init+0x0/0x4b6 returned -19 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.132814] calling centrino_init+0x0/0x2a @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.132831] initcall centrino_init+0x0/0x2a returned -19 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.132832] calling edd_init+0x0/0x2e5 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.132840] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Oct 13 16:52:33 kblu3 kernel: [ 4.133775] EDD information not available. Oct 13 16:52:33 kblu3 kernel: [ 4.134702] initcall edd_init+0x0/0x2e5 returned -19 after 1817 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134703] calling firmware_memmap_init+0x0/0x33 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134789] initcall firmware_memmap_init+0x0/0x33 returned 0 after 76 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134791] calling efi_shutdown_init+0x0/0x33 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134803] initcall efi_shutdown_init+0x0/0x33 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134804] calling clk_debug_init+0x0/0x137 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134825] initcall clk_debug_init+0x0/0x137 returned 0 after 12 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134826] calling pci_mmcfg_late_insert_resources+0x0/0x4b @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134839] initcall pci_mmcfg_late_insert_resources+0x0/0x4b returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134840] calling register_sk_filter_ops+0x0/0x8 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134851] initcall register_sk_filter_ops+0x0/0x8 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134852] calling tcp_congestion_default+0x0/0x12 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134865] initcall tcp_congestion_default+0x0/0x12 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134866] calling ip_auto_config+0x0/0xee5 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134878] initcall ip_auto_config+0x0/0xee5 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134880] calling software_resume+0x0/0x2e0 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134887] PM: Hibernation image not present or could not be loaded. Oct 13 16:52:33 kblu3 kernel: [ 4.134892] initcall software_resume+0x0/0x2e0 returned -2 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134893] calling regulator_init_complete+0x0/0x1f @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134902] initcall regulator_init_complete+0x0/0x1f returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134904] calling clk_disable_unused+0x0/0x100 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134913] initcall clk_disable_unused+0x0/0x100 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.134914] calling init_default_flow_dissectors+0x0/0x50 @ 1 Oct 13 16:52:33 kblu3 kernel: [ 4.134926] initcall init_default_flow_dissectors+0x0/0x50 returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.135733] Freeing unused kernel memory: 1536K (ffffffff81d65000 - ffffffff81ee5000) Oct 13 16:52:33 kblu3 kernel: [ 4.136644] Write protecting the kernel read-only data: 12288k Oct 13 16:52:33 kblu3 kernel: [ 4.137828] Freeing unused kernel memory: 28K (ffff8800027f9000 - ffff880002800000) Oct 13 16:52:33 kblu3 kernel: [ 4.139511] Freeing unused kernel memory: 332K (ffff880002bad000 - ffff880002c00000) Oct 13 16:52:33 kblu3 kernel: [ 4.195426] calling spt_pinctrl_init+0x0/0x1000 [pinctrl_sunrisepoint] @ 156 Oct 13 16:52:33 kblu3 kernel: [ 4.195907] initcall spt_pinctrl_init+0x0/0x1000 [pinctrl_sunrisepoint] returned 0 after 457 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.195995] calling acpi_video_init+0x0/0x1000 [video] @ 150 Oct 13 16:52:33 kblu3 kernel: [ 4.196028] initcall acpi_video_init+0x0/0x1000 [video] returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.221381] calling hid_init+0x0/0x65 [hid] @ 152 Oct 13 16:52:33 kblu3 kernel: [ 4.221406] hidraw: raw HID events driver (C) Jiri Kosina Oct 13 16:52:33 kblu3 kernel: [ 4.223002] initcall hid_init+0x0/0x65 [hid] returned 0 after 1568 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.224750] calling i2c_hid_driver_init+0x0/0x1000 [i2c_hid] @ 152 Oct 13 16:52:33 kblu3 kernel: [ 4.224782] initcall i2c_hid_driver_init+0x0/0x1000 [i2c_hid] returned 0 after 21 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.225228] calling acpi_wmi_init+0x0/0x1000 [wmi] @ 162 Oct 13 16:52:33 kblu3 kernel: [ 4.225323] wmi: Mapper loaded Oct 13 16:52:33 kblu3 kernel: [ 4.226254] initcall acpi_wmi_init+0x0/0x1000 [wmi] returned 0 after 992 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.232819] calling xhci_hcd_init+0x0/0x15 [xhci_hcd] @ 156 Oct 13 16:52:33 kblu3 kernel: [ 4.232837] initcall xhci_hcd_init+0x0/0x15 [xhci_hcd] returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.233769] calling xhci_pci_init+0x0/0x1000 [xhci_pci] @ 156 Oct 13 16:52:33 kblu3 kernel: [ 4.233957] xhci_hcd 0000:00:14.0: xHCI Host Controller Oct 13 16:52:33 kblu3 kernel: [ 4.234865] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 Oct 13 16:52:33 kblu3 kernel: [ 4.236230] calling ahci_pci_driver_init+0x0/0x1000 [ahci] @ 165 Oct 13 16:52:33 kblu3 kernel: [ 4.237170] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 Oct 13 16:52:33 kblu3 kernel: [ 4.238460] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported Oct 13 16:52:33 kblu3 kernel: [ 4.238518] calling sdhci_drv_init+0x0/0x1000 [sdhci] @ 153 Oct 13 16:52:33 kblu3 kernel: [ 4.238524] sdhci: Secure Digital Host Controller Interface driver Oct 13 16:52:33 kblu3 kernel: [ 4.238596] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Oct 13 16:52:33 kblu3 kernel: [ 4.238597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 13 16:52:33 kblu3 kernel: [ 4.238598] usb usb1: Product: xHCI Host Controller Oct 13 16:52:33 kblu3 kernel: [ 4.238600] usb usb1: Manufacturer: Linux 4.8.0-nightly+ xhci-hcd Oct 13 16:52:33 kblu3 kernel: [ 4.238601] usb usb1: SerialNumber: 0000:00:14.0 Oct 13 16:52:33 kblu3 kernel: [ 4.238777] hub 1-0:1.0: USB hub found Oct 13 16:52:33 kblu3 kernel: [ 4.238807] hub 1-0:1.0: 12 ports detected Oct 13 16:52:33 kblu3 kernel: [ 4.247806] sdhci: Copyright(c) Pierre Ossman Oct 13 16:52:33 kblu3 kernel: [ 4.249033] initcall sdhci_drv_init+0x0/0x1000 [sdhci] returned 0 after 10257 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.249087] calling pps_init+0x0/0x1000 [pps_core] @ 162 Oct 13 16:52:33 kblu3 kernel: [ 4.249102] pps_core: LinuxPPS API ver. 1 registered Oct 13 16:52:33 kblu3 kernel: [ 4.250787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti Oct 13 16:52:33 kblu3 kernel: [ 4.251977] initcall pps_init+0x0/0x1000 [pps_core] returned 0 after 2810 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.252080] calling sdhci_driver_init+0x0/0x1000 [sdhci_pci] @ 163 Oct 13 16:52:33 kblu3 kernel: [ 4.254478] calling ptp_init+0x0/0x1000 [ptp] @ 162 Oct 13 16:52:33 kblu3 kernel: [ 4.254491] PTP clock support registered Oct 13 16:52:33 kblu3 kernel: [ 4.254607] calling i915_init+0x0/0x5c [i915] @ 152 Oct 13 16:52:33 kblu3 kernel: [ 4.254756] xhci_hcd 0000:00:14.0: xHCI Host Controller Oct 13 16:52:33 kblu3 kernel: [ 4.254760] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 Oct 13 16:52:33 kblu3 kernel: [ 4.254798] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 Oct 13 16:52:33 kblu3 kernel: [ 4.254798] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 13 16:52:33 kblu3 kernel: [ 4.254799] usb usb2: Product: xHCI Host Controller Oct 13 16:52:33 kblu3 kernel: [ 4.254800] usb usb2: Manufacturer: Linux 4.8.0-nightly+ xhci-hcd Oct 13 16:52:33 kblu3 kernel: [ 4.254801] usb usb2: SerialNumber: 0000:00:14.0 Oct 13 16:52:33 kblu3 kernel: [ 4.254983] hub 2-0:1.0: USB hub found Oct 13 16:52:33 kblu3 kernel: [ 4.254997] hub 2-0:1.0: 6 ports detected Oct 13 16:52:33 kblu3 kernel: [ 4.258056] usb: port power management may be unreliable Oct 13 16:52:33 kblu3 kernel: [ 4.270458] initcall ptp_init+0x0/0x1000 [ptp] returned 0 after 15586 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.270529] ahci 0000:00:17.0: version 3.0 Oct 13 16:52:33 kblu3 kernel: [ 4.270852] initcall xhci_pci_init+0x0/0x1000 [xhci_pci] returned 0 after 36197 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.275076] calling e1000_init_module+0x0/0x1000 [e1000e] @ 162 Oct 13 16:52:33 kblu3 kernel: [ 4.275094] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k Oct 13 16:52:33 kblu3 kernel: [ 4.276560] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. Oct 13 16:52:33 kblu3 kernel: [ 4.280932] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Oct 13 16:52:33 kblu3 kernel: [ 4.281883] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst Oct 13 16:52:33 kblu3 kernel: [ 4.283507] scsi host0: ahci Oct 13 16:52:33 kblu3 kernel: [ 4.284803] scsi host1: ahci Oct 13 16:52:33 kblu3 kernel: [ 4.285767] ata1: SATA max UDMA/133 abar m2048@0xb1563000 port 0xb1563100 irq 276 Oct 13 16:52:33 kblu3 kernel: [ 4.286707] ata2: SATA max UDMA/133 abar m2048@0xb1563000 port 0xb1563180 irq 276 Oct 13 16:52:33 kblu3 kernel: [ 4.287723] sdhci-pci 0000:00:1e.4: SDHCI controller found [8086:9d2b] (rev 21) Oct 13 16:52:33 kblu3 kernel: [ 4.290905] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 53373 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.293111] mmc0: SDHCI controller on PCI [0000:00:1e.4] using ADMA 64-bit Oct 13 16:52:33 kblu3 kernel: [ 4.294045] sdhci-pci 0000:00:1e.6: SDHCI controller found [8086:9d2d] (rev 21) Oct 13 16:52:33 kblu3 kernel: [ 4.294970] sdhci-pci 0000:00:1e.6: enabling device (0000 -> 0002) Oct 13 16:52:33 kblu3 kernel: [ 4.296052] sdhci-pci 0000:00:1e.6: failed to setup card detect gpio Oct 13 16:52:33 kblu3 kernel: [ 4.301161] mmc1: SDHCI controller on PCI [0000:00:1e.6] using ADMA 64-bit Oct 13 16:52:33 kblu3 kernel: [ 4.302279] initcall sdhci_driver_init+0x0/0x1000 [sdhci_pci] returned 0 after 49006 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.302534] [drm:i915_driver_load [i915]] Found SunrisePoint LP PCH Oct 13 16:52:33 kblu3 kernel: [ 4.302563] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03 Oct 13 16:52:33 kblu3 kernel: [ 4.302660] [drm:intel_device_info_dump [i915]] i915 device info: gen=9, pciid=0x5926 rev=0x03 Oct 13 16:52:33 kblu3 kernel: [ 4.302683] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no[drm:intel_device_info_dump [i915]] i915 device info: is_i85x: no Oct 13 16:52:33 kblu3 kernel: [ 4.302722] [drm:intel_device_info_dump [i915]] i915 device info: is_i915g: no[drm:intel_device_info_dump [i915]] i915 device info: is_i945gm: no Oct 13 16:52:33 kblu3 kernel: [ 4.302758] [drm:intel_device_info_dump [i915]] i915 device info: is_g33: no[drm:intel_device_info_dump [i915]] i915 device info: is_g4x: no Oct 13 16:52:33 kblu3 kernel: [ 4.302789] [drm:intel_device_info_dump [i915]] i915 device info: is_pineview: no[drm:intel_device_info_dump [i915]] i915 device info: is_broadwater: no Oct 13 16:52:33 kblu3 kernel: [ 4.302818] [drm:intel_device_info_dump [i915]] i915 device info: is_crestline: no[drm:intel_device_info_dump [i915]] i915 device info: is_ivybridge: no Oct 13 16:52:33 kblu3 kernel: [ 4.302849] [drm:intel_device_info_dump [i915]] i915 device info: is_valleyview: no[drm:intel_device_info_dump [i915]] i915 device info: is_cherryview: no Oct 13 16:52:33 kblu3 kernel: [ 4.302881] [drm:intel_device_info_dump [i915]] i915 device info: is_haswell: no[drm:intel_device_info_dump [i915]] i915 device info: is_broadwell: no Oct 13 16:52:33 kblu3 kernel: [ 4.302913] [drm:intel_device_info_dump [i915]] i915 device info: is_skylake: no[drm:intel_device_info_dump [i915]] i915 device info: is_broxton: no Oct 13 16:52:33 kblu3 kernel: [ 4.302946] [drm:intel_device_info_dump [i915]] i915 device info: is_kabylake: yes[drm:intel_device_info_dump [i915]] i915 device info: is_preliminary: no Oct 13 16:52:33 kblu3 kernel: [ 4.302979] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: yes[drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes Oct 13 16:52:33 kblu3 kernel: [ 4.303011] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes[drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes Oct 13 16:52:33 kblu3 kernel: [ 4.303043] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes[drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes Oct 13 16:52:33 kblu3 kernel: [ 4.303076] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no[drm:intel_device_info_dump [i915]] i915 device info: has_guc: yes Oct 13 16:52:33 kblu3 kernel: [ 4.303108] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes[drm:intel_device_info_dump [i915]] i915 device info: has_hw_contexts: yes Oct 13 16:52:33 kblu3 kernel: [ 4.303141] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no[drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes Oct 13 16:52:33 kblu3 kernel: [ 4.303169] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes[drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no Oct 13 16:52:33 kblu3 kernel: [ 4.303195] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no[drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no Oct 13 16:52:33 kblu3 kernel: [ 4.303224] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes[drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes Oct 13 16:52:33 kblu3 kernel: [ 4.303254] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no[drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes Oct 13 16:52:33 kblu3 kernel: [ 4.303283] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes[drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no Oct 13 16:52:33 kblu3 kernel: [ 4.303312] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no[drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no Oct 13 16:52:33 kblu3 kernel: [ 4.303405] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no[drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no Oct 13 16:52:33 kblu3 kernel: [ 4.303433] [drm] Found 64MB of eDRAM Oct 13 16:52:33 kblu3 kernel: [ 4.305410] [drm:intel_device_info_runtime_init [i915]] slice mask: 0003 Oct 13 16:52:33 kblu3 kernel: [ 4.305433] [drm:intel_device_info_runtime_init [i915]] slice total: 2 Oct 13 16:52:33 kblu3 kernel: [ 4.305453] [drm:intel_device_info_runtime_init [i915]] subslice total: 6 Oct 13 16:52:33 kblu3 kernel: [ 4.305472] [drm:intel_device_info_runtime_init [i915]] subslice mask 0007 Oct 13 16:52:33 kblu3 kernel: [ 4.305490] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 3 Oct 13 16:52:33 kblu3 kernel: [ 4.305507] [drm:intel_device_info_runtime_init [i915]] EU total: 48 Oct 13 16:52:33 kblu3 kernel: [ 4.305523] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 8 Oct 13 16:52:33 kblu3 kernel: [ 4.305540] [drm:intel_device_info_runtime_init [i915]] has slice power gating: y Oct 13 16:52:33 kblu3 kernel: [ 4.305556] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n Oct 13 16:52:33 kblu3 kernel: [ 4.305573] [drm:intel_device_info_runtime_init [i915]] has EU power gating: y Oct 13 16:52:33 kblu3 kernel: [ 4.305594] [drm:i915_driver_load [i915]] ppgtt mode: 3 Oct 13 16:52:33 kblu3 kernel: [ 4.305610] [drm:i915_driver_load [i915]] use GPU sempahores? no Oct 13 16:52:33 kblu3 kernel: [ 4.305631] [drm] Memory usable by graphics device = 4096M Oct 13 16:52:33 kblu3 kernel: [ 4.307448] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M Oct 13 16:52:33 kblu3 kernel: [ 4.307475] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 32M Oct 13 16:52:33 kblu3 kernel: [ 4.307476] checking generic (a0000000 7f0000) vs hw (a0000000 10000000) Oct 13 16:52:33 kblu3 kernel: [ 4.307477] fb: switching to inteldrmfb from EFI VGA Oct 13 16:52:33 kblu3 kernel: [ 4.309160] Console: switching to colour dummy device 80x25 Oct 13 16:52:33 kblu3 kernel: [ 4.309338] [drm] Replacing VGA console driver Oct 13 16:52:33 kblu3 kernel: [ 4.309392] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K Oct 13 16:52:33 kblu3 kernel: [ 4.309769] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8d28c018 Oct 13 16:52:33 kblu3 kernel: [ 4.309802] [drm:intel_opregion_setup [i915]] Public ACPI methods supported Oct 13 16:52:33 kblu3 kernel: [ 4.309825] [drm:intel_opregion_setup [i915]] SWSCI supported Oct 13 16:52:33 kblu3 kernel: [ 4.315456] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 Oct 13 16:52:33 kblu3 kernel: [ 4.315484] [drm:intel_opregion_setup [i915]] ASLE supported Oct 13 16:52:33 kblu3 kernel: [ 4.315508] [drm:intel_opregion_setup [i915]] ASLE extension supported Oct 13 16:52:33 kblu3 kernel: [ 4.315535] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) Oct 13 16:52:33 kblu3 kernel: [ 4.315586] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Oct 13 16:52:33 kblu3 kernel: [ 4.315592] [drm] Driver supports precise vblank timestamp query. Oct 13 16:52:33 kblu3 kernel: [ 4.315623] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz Oct 13 16:52:33 kblu3 kernel: [ 4.315648] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 207 Oct 13 16:52:33 kblu3 kernel: [ 4.315669] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 Oct 13 16:52:33 kblu3 kernel: [ 4.315692] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 Oct 13 16:52:33 kblu3 kernel: [ 4.317797] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) Oct 13 16:52:33 kblu3 kernel: [ 4.317825] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) Oct 13 16:52:33 kblu3 kernel: [ 4.317853] [drm:intel_bios_init [i915]] DRRS supported mode is static Oct 13 16:52:33 kblu3 kernel: [ 4.317876] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: Oct 13 16:52:33 kblu3 kernel: [ 4.317882] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.317903] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 Oct 13 16:52:33 kblu3 kernel: [ 4.317922] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 Oct 13 16:52:33 kblu3 kernel: [ 4.317940] [drm:intel_bios_init [i915]] Unsupported child device size for SDVO mapping. Oct 13 16:52:33 kblu3 kernel: [ 4.317960] [drm:intel_bios_init [i915]] Expected child device config size for VBT version 207 not known; assuming 38 Oct 13 16:52:33 kblu3 kernel: [ 4.317977] [drm:intel_bios_init [i915]] DRRS State Enabled:1 Oct 13 16:52:33 kblu3 kernel: [ 4.317998] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 Oct 13 16:52:33 kblu3 kernel: [ 4.318013] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.318032] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 Oct 13 16:52:33 kblu3 kernel: [ 4.318051] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8 Oct 13 16:52:33 kblu3 kernel: [ 4.318070] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 Oct 13 16:52:33 kblu3 kernel: [ 4.318089] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8 Oct 13 16:52:33 kblu3 kernel: [ 4.318150] [drm:intel_dsm_detect [i915]] no _DSM method for intel device Oct 13 16:52:33 kblu3 kernel: [ 4.318188] [drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz Oct 13 16:52:33 kblu3 kernel: [ 4.318215] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 Oct 13 16:52:33 kblu3 kernel: [ 4.318245] [drm:intel_power_well_enable [i915]] enabling power well 1 Oct 13 16:52:33 kblu3 kernel: [ 4.318265] [drm:intel_power_well_enable [i915]] enabling MISC IO power well Oct 13 16:52:33 kblu3 kernel: [ 4.318294] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz Oct 13 16:52:33 kblu3 kernel: [ 4.318314] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz Oct 13 16:52:33 kblu3 kernel: [ 4.318331] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz Oct 13 16:52:33 kblu3 kernel: [ 4.318366] [drm:intel_power_well_enable [i915]] enabling always-on Oct 13 16:52:33 kblu3 kernel: [ 4.318386] [drm:intel_power_well_enable [i915]] enabling DC off Oct 13 16:52:33 kblu3 kernel: [ 4.318403] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 Oct 13 16:52:33 kblu3 kernel: [ 4.318424] [drm:intel_power_well_enable [i915]] enabling power well 2 Oct 13 16:52:33 kblu3 kernel: [ 4.318445] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well Oct 13 16:52:33 kblu3 kernel: [ 4.318464] [drm:intel_power_well_enable [i915]] enabling DDI B power well Oct 13 16:52:33 kblu3 kernel: [ 4.318480] [drm:intel_power_well_enable [i915]] enabling DDI C power well Oct 13 16:52:33 kblu3 kernel: [ 4.318496] [drm:skl_set_power_well [i915]] Enabling DDI C power well Oct 13 16:52:33 kblu3 kernel: [ 4.318516] [drm:intel_power_well_enable [i915]] enabling DDI D power well Oct 13 16:52:33 kblu3 kernel: [ 4.318533] [drm:skl_set_power_well [i915]] Enabling DDI D power well Oct 13 16:52:33 kblu3 kernel: [ 4.318549] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 Oct 13 16:52:33 kblu3 kernel: [ 4.318607] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_01.bin Oct 13 16:52:33 kblu3 kernel: [ 4.319876] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.319908] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) Oct 13 16:52:33 kblu3 kernel: [ 4.319925] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) Oct 13 16:52:33 kblu3 kernel: [ 4.319938] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) Oct 13 16:52:33 kblu3 kernel: [ 4.319951] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) Oct 13 16:52:33 kblu3 kernel: [ 4.319963] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) Oct 13 16:52:33 kblu3 kernel: [ 4.319974] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) Oct 13 16:52:33 kblu3 kernel: [ 4.319985] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) Oct 13 16:52:33 kblu3 kernel: [ 4.319995] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) Oct 13 16:52:33 kblu3 kernel: [ 4.319996] [drm] Finished loading i915/kbl_dmc_ver1_01.bin (v1.1) Oct 13 16:52:33 kblu3 kernel: [ 4.320022] [drm:intel_modeset_init [i915]] 3 display pipes available. Oct 13 16:52:33 kblu3 kernel: [ 4.320071] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz Oct 13 16:52:33 kblu3 kernel: [ 4.320074] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem Oct 13 16:52:33 kblu3 kernel: [ 4.320403] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A Oct 13 16:52:33 kblu3 kernel: [ 4.320489] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 Oct 13 16:52:33 kblu3 kernel: [ 4.320505] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 Oct 13 16:52:33 kblu3 kernel: [ 4.320519] [drm:intel_dp_init_panel_power_sequencer.part.17 [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 Oct 13 16:52:33 kblu3 kernel: [ 4.320532] [drm:intel_dp_init_panel_power_sequencer.part.17 [i915]] backlight on delay 1, off delay 200 Oct 13 16:52:33 kblu3 kernel: [ 4.320607] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 Oct 13 16:52:33 kblu3 kernel: [ 4.320646] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on Oct 13 16:52:33 kblu3 kernel: [ 4.320721] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f Oct 13 16:52:33 kblu3 kernel: [ 4.321250] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 0a 84 41 01 00 00 00 02 00 00 00 10 0b 01 Oct 13 16:52:33 kblu3 kernel: [ 4.321703] [drm:intel_dp_init_connector [i915]] Detected EDP PSR Panel. Oct 13 16:52:33 kblu3 kernel: [ 4.322132] [drm:intel_dp_init_connector [i915]] EDP DPCD : 02 00 00 Oct 13 16:52:33 kblu3 kernel: [ 4.326800] [drm:drm_edid_to_eld] ELD: no CEA Extension found Oct 13 16:52:33 kblu3 kernel: [ 4.326826] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS Oct 13 16:52:33 kblu3 kernel: [ 4.326913] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 937/937 Oct 13 16:52:33 kblu3 kernel: [ 4.326967] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B Oct 13 16:52:33 kblu3 kernel: [ 4.326995] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B Oct 13 16:52:33 kblu3 kernel: [ 4.327017] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C Oct 13 16:52:33 kblu3 kernel: [ 4.327036] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C Oct 13 16:52:33 kblu3 kernel: [ 4.327066] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:26:pipe A] hw state readout: enabled Oct 13 16:52:33 kblu3 kernel: [ 4.327090] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:30:pipe B] hw state readout: enabled Oct 13 16:52:33 kblu3 kernel: [ 4.327105] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:34:pipe C] hw state readout: disabled Oct 13 16:52:33 kblu3 kernel: [ 4.327120] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1 Oct 13 16:52:33 kblu3 kernel: [ 4.327134] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000002, on 1 Oct 13 16:52:33 kblu3 kernel: [ 4.327147] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327159] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327178] [drm:intel_ddi_get_config [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp Oct 13 16:52:33 kblu3 kernel: [ 4.327191] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:36:DDI A] hw state readout: enabled, pipe A Oct 13 16:52:33 kblu3 kernel: [ 4.327206] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:45:DDI B] hw state readout: enabled, pipe B Oct 13 16:52:33 kblu3 kernel: [ 4.327217] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:47:DP-MST A] hw state readout: disabled, pipe A Oct 13 16:52:33 kblu3 kernel: [ 4.327228] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:48:DP-MST B] hw state readout: disabled, pipe B Oct 13 16:52:33 kblu3 kernel: [ 4.327239] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:49:DP-MST C] hw state readout: disabled, pipe C Oct 13 16:52:33 kblu3 kernel: [ 4.327250] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:52:DDI C] hw state readout: disabled, pipe A Oct 13 16:52:33 kblu3 kernel: [ 4.327261] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:DP-MST A] hw state readout: disabled, pipe A Oct 13 16:52:33 kblu3 kernel: [ 4.327272] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:DP-MST B] hw state readout: disabled, pipe B Oct 13 16:52:33 kblu3 kernel: [ 4.327282] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:56:DP-MST C] hw state readout: disabled, pipe C Oct 13 16:52:33 kblu3 kernel: [ 4.327295] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:37:eDP-1] hw state readout: enabled Oct 13 16:52:33 kblu3 kernel: [ 4.327307] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:46:DP-1] hw state readout: disabled Oct 13 16:52:33 kblu3 kernel: [ 4.327319] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:50:HDMI-A-1] hw state readout: enabled Oct 13 16:52:33 kblu3 kernel: [ 4.327330] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:53:DP-2] hw state readout: disabled Oct 13 16:52:33 kblu3 kernel: [ 4.327364] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:57:HDMI-A-2] hw state readout: disabled Oct 13 16:52:33 kblu3 kernel: [ 4.327405] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][setup_hw_state] config ffff88025cc13800 for pipe A Oct 13 16:52:33 kblu3 kernel: [ 4.327418] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP Oct 13 16:52:33 kblu3 kernel: [ 4.327431] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327443] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327455] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m: 5627357, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64 Oct 13 16:52:33 kblu3 kernel: [ 4.327466] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327476] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327487] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:52:33 kblu3 kernel: [ 4.327489] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241499 2560 2608 2640 2720 1440 1442 1447 1480 0x40 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.327500] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:52:33 kblu3 kernel: [ 4.327502] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241499 2560 2608 2640 2720 1440 1442 1447 1480 0x40 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.327513] [drm:intel_dump_pipe_config [i915]] crtc timings: 241499 2560 2608 2640 2720 1440 1442 1447 1480, type: 0x40 flags: 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.327523] [drm:intel_dump_pipe_config [i915]] port clock: 270000 Oct 13 16:52:33 kblu3 kernel: [ 4.327533] [drm:intel_dump_pipe_config [i915]] pipe src size: 1920x1080 Oct 13 16:52:33 kblu3 kernel: [ 4.327544] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327554] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:52:33 kblu3 kernel: [ 4.327565] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x0a0005a0, enabled Oct 13 16:52:33 kblu3 kernel: [ 4.327575] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327585] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327595] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.327605] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:52:33 kblu3 kernel: [ 4.327616] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.327626] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.327636] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.327665] [drm:intel_dump_pipe_config [i915]] [CRTC:30:pipe B][setup_hw_state] config ffff88025cc14800 for pipe B Oct 13 16:52:33 kblu3 kernel: [ 4.327675] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B Oct 13 16:52:33 kblu3 kernel: [ 4.327685] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327696] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327706] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327716] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327726] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327736] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:52:33 kblu3 kernel: [ 4.327738] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.327748] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:52:33 kblu3 kernel: [ 4.327750] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.327760] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.327770] [drm:intel_dump_pipe_config [i915]] port clock: 148500 Oct 13 16:52:33 kblu3 kernel: [ 4.327780] [drm:intel_dump_pipe_config [i915]] pipe src size: 1920x1080 Oct 13 16:52:33 kblu3 kernel: [ 4.327790] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327800] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:52:33 kblu3 kernel: [ 4.327810] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled Oct 13 16:52:33 kblu3 kernel: [ 4.327820] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327830] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327840] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80400173, cfgcr2: 0x3a5 Oct 13 16:52:33 kblu3 kernel: [ 4.327850] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:52:33 kblu3 kernel: [ 4.327860] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1B] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.327870] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor B] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.327880] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2B] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.327891] [drm:intel_dump_pipe_config [i915]] [CRTC:34:pipe C][setup_hw_state] config ffff88025cc15800 for pipe C Oct 13 16:52:33 kblu3 kernel: [ 4.327901] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C Oct 13 16:52:33 kblu3 kernel: [ 4.327911] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327921] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327931] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327941] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327951] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.327961] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:52:33 kblu3 kernel: [ 4.327963] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.327973] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:52:33 kblu3 kernel: [ 4.327974] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.327985] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.327994] [drm:intel_dump_pipe_config [i915]] port clock: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.328004] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.328014] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.328024] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:52:33 kblu3 kernel: [ 4.328034] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:52:33 kblu3 kernel: [ 4.328044] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.328053] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.328063] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.328073] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:52:33 kblu3 kernel: [ 4.328083] [drm:intel_dump_pipe_config [i915]] [PLANE:32:plane 1C] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.328093] [drm:intel_dump_pipe_config [i915]] [PLANE:33:cursor C] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.328103] [drm:intel_dump_pipe_config [i915]] [PLANE:35:plane 2C] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.328147] [drm:intel_power_well_disable [i915]] disabling DDI D power well Oct 13 16:52:33 kblu3 kernel: [ 4.328162] [drm:skl_set_power_well [i915]] Disabling DDI D power well Oct 13 16:52:33 kblu3 kernel: [ 4.328176] [drm:intel_power_well_disable [i915]] disabling DDI C power well Oct 13 16:52:33 kblu3 kernel: [ 4.328189] [drm:skl_set_power_well [i915]] Disabling DDI C power well Oct 13 16:52:33 kblu3 kernel: [ 4.328206] [drm:skylake_get_initial_plane_config [i915]] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 Oct 13 16:52:33 kblu3 kernel: [ 4.328223] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 Oct 13 16:52:33 kblu3 kernel: [ 4.328241] [drm:_i915_gem_object_create_stolen [i915]] offset=0x0, size=8294400 Oct 13 16:52:33 kblu3 kernel: [ 4.328255] [drm:intel_alloc_initial_plane_obj.isra.125 [i915]] initial plane fb obj ffff88025c78c000 Oct 13 16:52:33 kblu3 kernel: [ 4.328269] [drm:skylake_get_initial_plane_config [i915]] pipe B with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 Oct 13 16:52:33 kblu3 kernel: [ 4.328284] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 Oct 13 16:52:33 kblu3 kernel: [ 4.328296] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space Oct 13 16:52:33 kblu3 kernel: [ 4.328631] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7e9000, fffff000] Oct 13 16:52:33 kblu3 kernel: [ 4.328654] [drm:i915_gem_context_init [i915]] LR context support initialized Oct 13 16:52:33 kblu3 kernel: [ 4.328668] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=1000 Oct 13 16:52:33 kblu3 kernel: [ 4.328681] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7e9000, size=4096 Oct 13 16:52:33 kblu3 kernel: [ 4.328696] [drm:intel_engine_create_scratch [i915]] render ring pipe control offset: 0xffffe000 Oct 13 16:52:33 kblu3 kernel: [ 4.328948] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:52:33 kblu3 kernel: [ 4.328961] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7ea000, size=16384 Oct 13 16:52:33 kblu3 kernel: [ 4.329220] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:52:33 kblu3 kernel: [ 4.329235] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7ee000, size=16384 Oct 13 16:52:33 kblu3 kernel: [ 4.329478] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:52:33 kblu3 kernel: [ 4.329500] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7f2000, size=16384 Oct 13 16:52:33 kblu3 kernel: [ 4.329752] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:52:33 kblu3 kernel: [ 4.329772] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7f6000, size=16384 Oct 13 16:52:33 kblu3 kernel: [ 4.330001] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:52:33 kblu3 kernel: [ 4.330018] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7fa000, size=16384 Oct 13 16:52:33 kblu3 kernel: [ 4.330079] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring Oct 13 16:52:33 kblu3 kernel: [ 4.330149] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring Oct 13 16:52:33 kblu3 kernel: [ 4.330202] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring Oct 13 16:52:33 kblu3 kernel: [ 4.330253] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd2 ring Oct 13 16:52:33 kblu3 kernel: [ 4.330302] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring Oct 13 16:52:33 kblu3 kernel: [ 4.330360] [drm:intel_guc_setup [i915]] GuC fw status: path i915/kbl_guc_ver9_14.bin, fetch NONE, load NONE Oct 13 16:52:33 kblu3 kernel: [ 4.330367] [drm] GuC firmware load skipped Oct 13 16:52:33 kblu3 kernel: [ 4.330410] [drm:intel_update_cdclk [i915]] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz Oct 13 16:52:33 kblu3 kernel: [ 4.330439] [drm:intel_fbdev_init [i915]] found possible fb from plane A Oct 13 16:52:33 kblu3 kernel: [ 4.330455] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping Oct 13 16:52:33 kblu3 kernel: [ 4.330470] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb Oct 13 16:52:33 kblu3 kernel: [ 4.330483] [drm:intel_fbdev_init [i915]] fb not wide enough for plane A (10240 vs 7680) Oct 13 16:52:33 kblu3 kernel: [ 4.330496] [drm:intel_fbdev_init [i915]] BIOS fb not suitable for all pipes, not using Oct 13 16:52:33 kblu3 kernel: [ 4.330590] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:52:33 kblu3 kernel: [ 4.330605] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no Oct 13 16:52:33 kblu3 kernel: [ 4.330619] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 Oct 13 16:52:33 kblu3 kernel: [ 4.330632] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 Oct 13 16:52:33 kblu3 kernel: [ 4.330644] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 Oct 13 16:52:33 kblu3 kernel: [ 4.331102] [drm:drm_helper_hpd_irq_event] [CONNECTOR:37:eDP-1] status updated from unknown to connected Oct 13 16:52:33 kblu3 kernel: [ 4.331124] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1] Oct 13 16:52:33 kblu3 kernel: [ 4.341130] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.353434] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.365260] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.376464] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.384982] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.393492] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.402482] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.411010] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.421327] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.433974] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.446294] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.457703] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.466215] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.474748] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.484781] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.493311] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.503072] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.516424] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.529768] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.542566] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.551080] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.559613] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.568785] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.577312] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.579356] usb 1-3: new full-speed USB device number 2 using xhci_hcd Oct 13 16:52:33 kblu3 kernel: [ 4.587697] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.599951] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.602088] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Oct 13 16:52:33 kblu3 kernel: [ 4.602135] ata1: SATA link down (SStatus 4 SControl 300) Oct 13 16:52:33 kblu3 kernel: [ 4.616486] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.619814] ata2.00: ATA-9: INTEL SSDSC2BW080A4, DC32, max UDMA/133 Oct 13 16:52:33 kblu3 kernel: [ 4.619818] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Oct 13 16:52:33 kblu3 kernel: [ 4.630832] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.639696] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.643031] ata2.00: configured for UDMA/133 Oct 13 16:52:33 kblu3 kernel: [ 4.643358] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BW08 DC32 PQ: 0 ANSI: 5 Oct 13 16:52:33 kblu3 kernel: [ 4.648266] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.656795] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.659599] sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Oct 13 16:52:33 kblu3 kernel: [ 4.659628] sd 1:0:0:0: Attached scsi generic sg0 type 0 Oct 13 16:52:33 kblu3 kernel: [ 4.659922] sd 1:0:0:0: [sda] Write Protect is off Oct 13 16:52:33 kblu3 kernel: [ 4.659927] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 13 16:52:33 kblu3 kernel: [ 4.660026] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 13 16:52:33 kblu3 kernel: [ 4.661000] sda: sda1 sda2 sda3 Oct 13 16:52:33 kblu3 kernel: [ 4.661832] sd 1:0:0:0: [sda] Attached SCSI disk Oct 13 16:52:33 kblu3 kernel: [ 4.665811] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.665816] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110 Oct 13 16:52:33 kblu3 kernel: [ 4.665826] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:DP-1] status updated from unknown to disconnected Oct 13 16:52:33 kblu3 kernel: [ 4.665858] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:52:33 kblu3 kernel: [ 4.679145] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.679165] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry Oct 13 16:52:33 kblu3 kernel: [ 4.679555] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.679572] [drm:intel_hdmi_set_edid [i915]] Assuming DP dual mode adaptor presence based on VBT Oct 13 16:52:33 kblu3 kernel: [ 4.679586] [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz) Oct 13 16:52:33 kblu3 kernel: [ 4.679590] [drm:drm_helper_hpd_irq_event] [CONNECTOR:50:HDMI-A-1] status updated from unknown to connected Oct 13 16:52:33 kblu3 kernel: [ 4.679607] [drm:intel_dp_detect [i915]] [CONNECTOR:53:DP-2] Oct 13 16:52:33 kblu3 kernel: [ 4.679638] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from unknown to disconnected Oct 13 16:52:33 kblu3 kernel: [ 4.679652] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:52:33 kblu3 kernel: [ 4.679910] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.679925] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry Oct 13 16:52:33 kblu3 kernel: [ 4.680225] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.680227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc Oct 13 16:52:33 kblu3 kernel: [ 4.680485] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.680516] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry Oct 13 16:52:33 kblu3 kernel: [ 4.680819] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.680822] [drm:drm_helper_hpd_irq_event] [CONNECTOR:57:HDMI-A-2] status updated from unknown to disconnected Oct 13 16:52:33 kblu3 kernel: [ 4.681213] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered Oct 13 16:52:33 kblu3 kernel: [ 4.681250] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 Oct 13 16:52:33 kblu3 kernel: [ 4.681354] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1 Oct 13 16:52:33 kblu3 kernel: [ 4.681437] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2 Oct 13 16:52:33 kblu3 kernel: [ 4.682418] [drm:intel_opregion_register [i915]] More than 15 outputs detected via ACPI Oct 13 16:52:33 kblu3 kernel: [ 4.684716] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Oct 13 16:52:33 kblu3 kernel: [ 4.685038] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 Oct 13 16:52:33 kblu3 kernel: [ 4.685209] [drm] Initialized i915 1.6.0 20161010 for 0000:00:02.0 on minor 0 Oct 13 16:52:33 kblu3 kernel: [ 4.685229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] Oct 13 16:52:33 kblu3 kernel: [ 4.685257] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:52:33 kblu3 kernel: [ 4.685283] initcall i915_init+0x0/0x5c [i915] returned 0 after 420541 usecs Oct 13 16:52:33 kblu3 kernel: [ 4.685311] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no Oct 13 16:52:33 kblu3 kernel: [ 4.685313] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) Oct 13 16:52:33 kblu3 kernel: [ 4.685341] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 Oct 13 16:52:33 kblu3 kernel: [ 4.685359] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 Oct 13 16:52:33 kblu3 kernel: [ 4.685373] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 Oct 13 16:52:33 kblu3 kernel: [ 4.685549] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode Oct 13 16:52:33 kblu3 kernel: [ 4.685848] [drm:drm_edid_to_eld] ELD: no CEA Extension found Oct 13 16:52:33 kblu3 kernel: [ 4.685852] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes : Oct 13 16:52:33 kblu3 kernel: [ 4.685854] [drm:drm_mode_debug_printmodeline] Modeline 38:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.685856] [drm:drm_mode_debug_printmodeline] Modeline 39:"2560x1440" 48 193220 2560 2608 2640 2720 1440 1442 1447 1480 0x40 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.685858] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] Oct 13 16:52:33 kblu3 kernel: [ 4.685874] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1] Oct 13 16:52:33 kblu3 kernel: [ 4.694451] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.702992] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.711540] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.720094] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.720357] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b Oct 13 16:52:33 kblu3 kernel: [ 4.720363] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 13 16:52:33 kblu3 kernel: [ 4.728635] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.737163] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.743385] tsc: Refined TSC clocksource calibration: 1799.999 MHz Oct 13 16:52:33 kblu3 kernel: [ 4.743412] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns Oct 13 16:52:33 kblu3 kernel: [ 4.745689] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.754212] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.762783] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.771303] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.779836] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.788359] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.796891] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.805427] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.813950] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.822483] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.831017] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.839554] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.843356] usb 1-7: new high-speed USB device number 3 using xhci_hcd Oct 13 16:52:33 kblu3 kernel: [ 4.848083] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.856615] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.865144] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.873657] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.882194] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.890726] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.899258] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.907785] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.916317] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.924849] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.933373] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.941897] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.950429] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.958956] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:52:33 kblu3 kernel: [ 4.958960] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110 Oct 13 16:52:33 kblu3 kernel: [ 4.958964] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected Oct 13 16:52:33 kblu3 kernel: [ 4.958968] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] Oct 13 16:52:33 kblu3 kernel: [ 4.958998] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:52:33 kblu3 kernel: [ 4.965492] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock Oct 13 16:52:33 kblu3 kernel: [ 4.972505] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.972526] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry Oct 13 16:52:33 kblu3 kernel: [ 4.972937] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.972960] [drm:intel_hdmi_set_edid [i915]] Assuming DP dual mode adaptor presence based on VBT Oct 13 16:52:33 kblu3 kernel: [ 4.972978] [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz) Oct 13 16:52:33 kblu3 kernel: [ 4.972990] [drm:drm_edid_to_eld] ELD: no CEA Extension found Oct 13 16:52:33 kblu3 kernel: [ 4.972995] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] probed modes : Oct 13 16:52:33 kblu3 kernel: [ 4.972997] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.972999] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.973001] [drm:drm_mode_debug_printmodeline] Modeline 64:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.973002] [drm:drm_mode_debug_printmodeline] Modeline 63:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.973004] [drm:drm_mode_debug_printmodeline] Modeline 70:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.973006] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.973007] [drm:drm_mode_debug_printmodeline] Modeline 72:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.973009] [drm:drm_mode_debug_printmodeline] Modeline 65:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.973010] [drm:drm_mode_debug_printmodeline] Modeline 66:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.973012] [drm:drm_mode_debug_printmodeline] Modeline 67:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.973014] [drm:drm_mode_debug_printmodeline] Modeline 68:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 Oct 13 16:52:33 kblu3 kernel: [ 4.973015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] Oct 13 16:52:33 kblu3 kernel: [ 4.973034] [drm:intel_dp_detect [i915]] [CONNECTOR:53:DP-2] Oct 13 16:52:33 kblu3 kernel: [ 4.973052] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-2] disconnected Oct 13 16:52:33 kblu3 kernel: [ 4.973053] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] Oct 13 16:52:33 kblu3 kernel: [ 4.973069] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:52:33 kblu3 kernel: [ 4.973484] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.973505] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry Oct 13 16:52:33 kblu3 kernel: [ 4.973918] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.973921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc Oct 13 16:52:33 kblu3 kernel: [ 4.974331] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.974352] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry Oct 13 16:52:33 kblu3 kernel: [ 4.974759] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) Oct 13 16:52:33 kblu3 kernel: [ 4.974763] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected Oct 13 16:52:33 kblu3 kernel: [ 4.974765] [drm:drm_setup_crtcs] Oct 13 16:52:33 kblu3 kernel: [ 4.974767] [drm:drm_setup_crtcs] connector 37 enabled? yes Oct 13 16:52:33 kblu3 kernel: [ 4.974768] [drm:drm_setup_crtcs] connector 46 enabled? no Oct 13 16:52:33 kblu3 kernel: [ 4.974769] [drm:drm_setup_crtcs] connector 50 enabled? yes Oct 13 16:52:33 kblu3 kernel: [ 4.974770] [drm:drm_setup_crtcs] connector 53 enabled? no Oct 13 16:52:33 kblu3 kernel: [ 4.974771] [drm:drm_setup_crtcs] connector 57 enabled? no Oct 13 16:52:33 kblu3 kernel: [ 4.974794] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1 Oct 13 16:52:33 kblu3 kernel: [ 4.974812] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0 Oct 13 16:52:33 kblu3 kernel: [ 4.974829] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:26:pipe A]: 2560x1440 Oct 13 16:52:33 kblu3 kernel: [ 4.974843] [drm:intel_fb_initial_config [i915]] connector DP-1 not enabled, skipping Oct 13 16:52:33 kblu3 kernel: [ 4.974857] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector HDMI-A-1 Oct 13 16:52:33 kblu3 kernel: [ 4.974869] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector HDMI-A-1 0 Oct 13 16:52:33 kblu3 kernel: [ 4.974882] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 on [CRTC:30:pipe B]: 1920x1080 Oct 13 16:52:33 kblu3 kernel: [ 4.974894] [drm:intel_fb_initial_config [i915]] connector DP-2 not enabled, skipping Oct 13 16:52:33 kblu3 kernel: [ 4.974906] [drm:intel_fb_initial_config [i915]] connector HDMI-A-2 not enabled, skipping Oct 13 16:52:33 kblu3 kernel: [ 4.974908] [drm:drm_setup_crtcs] desired mode 2560x1440 set on crtc 26 (0,0) Oct 13 16:52:33 kblu3 kernel: [ 4.974909] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 30 (0,0) Oct 13 16:52:33 kblu3 kernel: [ 4.974922] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one Oct 13 16:52:33 kblu3 kernel: [ 4.974942] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=e10000 Oct 13 16:52:33 kblu3 kernel: [ 4.974964] [drm:_i915_gem_object_create_stolen [i915]] offset=0x7fe000, size=14745600 Oct 13 16:52:33 kblu3 kernel: [ 4.976188] [drm:intelfb_create [i915]] allocated 2560x1440 fb: 0x00840000 Oct 13 16:52:33 kblu3 kernel: [ 4.976375] fbcon: inteldrmfb (fb0) is primary device Oct 13 16:52:33 kblu3 kernel: [ 4.976453] [drm:intel_atomic_check [i915]] [CONNECTOR:37:eDP-1] checking for sink bpp constrains Oct 13 16:52:33 kblu3 kernel: [ 4.976470] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 Oct 13 16:52:33 kblu3 kernel: [ 4.976489] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:52:33 kblu3 kernel: [ 4.976507] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.976525] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 241500KHz Oct 13 16:52:33 kblu3 kernel: [ 4.976543] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 4 clock 270000 bpp 24 Oct 13 16:52:33 kblu3 kernel: [ 4.976557] [drm:intel_dp_compute_config [i915]] DP link bw required 579600 available 864000 Oct 13 16:52:33 kblu3 kernel: [ 4.976573] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976590] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][modeset] config ffff88025c480000 for pipe A Oct 13 16:52:33 kblu3 kernel: [ 4.976612] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP Oct 13 16:52:33 kblu3 kernel: [ 4.976630] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976644] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976655] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m: 5627357, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64 Oct 13 16:52:33 kblu3 kernel: [ 4.976667] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976678] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976688] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:52:33 kblu3 kernel: [ 4.976691] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.976702] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:52:33 kblu3 kernel: [ 4.976704] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.976715] [drm:intel_dump_pipe_config [i915]] crtc timings: 241500 2560 2608 2640 2720 1440 1442 1447 1480, type: 0x48 flags: 0xa Oct 13 16:52:33 kblu3 kernel: [ 4.976726] [drm:intel_dump_pipe_config [i915]] port clock: 270000 Oct 13 16:52:33 kblu3 kernel: [ 4.976750] [drm:intel_dump_pipe_config [i915]] pipe src size: 2560x1440 Oct 13 16:52:33 kblu3 kernel: [ 4.976761] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 Oct 13 16:52:33 kblu3 kernel: [ 4.976771] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:52:33 kblu3 kernel: [ 4.976782] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:52:33 kblu3 kernel: [ 4.976792] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976802] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976812] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.976822] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:52:33 kblu3 kernel: [ 4.976846] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] enabled Oct 13 16:52:33 kblu3 kernel: [ 4.976856] [drm:intel_dump_pipe_config [i915]] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) Oct 13 16:52:33 kblu3 kernel: [ 4.976856] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 Oct 13 16:52:33 kblu3 kernel: [ 4.976867] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.976877] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.976891] [drm:intel_atomic_check [i915]] [CONNECTOR:50:HDMI-A-1] checking for sink bpp constrains Oct 13 16:52:33 kblu3 kernel: [ 4.976903] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24 Oct 13 16:52:33 kblu3 kernel: [ 4.976921] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output Oct 13 16:52:33 kblu3 kernel: [ 4.976936] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpc to 24 for HDMI Oct 13 16:52:33 kblu3 kernel: [ 4.976949] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976960] [drm:intel_dump_pipe_config [i915]] [CRTC:30:pipe B][modeset] config ffff88025c480800 for pipe B Oct 13 16:52:33 kblu3 kernel: [ 4.976971] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B Oct 13 16:52:33 kblu3 kernel: [ 4.976981] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.976991] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.977001] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.977011] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.977021] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.977031] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:52:33 kblu3 kernel: [ 4.977033] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.977043] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:52:33 kblu3 kernel: [ 4.977045] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.977055] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5 Oct 13 16:52:33 kblu3 kernel: [ 4.977065] [drm:intel_dump_pipe_config [i915]] port clock: 148500 Oct 13 16:52:33 kblu3 kernel: [ 4.977074] [drm:intel_dump_pipe_config [i915]] pipe src size: 1920x1080 Oct 13 16:52:33 kblu3 kernel: [ 4.977084] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.977094] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:52:33 kblu3 kernel: [ 4.977104] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:52:33 kblu3 kernel: [ 4.977114] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.977123] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:52:33 kblu3 kernel: [ 4.977133] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80400173, cfgcr2: 0x3a5 Oct 13 16:52:33 kblu3 kernel: [ 4.977142] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:52:33 kblu3 kernel: [ 4.977162] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1B] enabled Oct 13 16:52:33 kblu3 kernel: [ 4.977173] [drm:intel_dump_pipe_config [i915]] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) Oct 13 16:52:33 kblu3 kernel: [ 4.977173] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 Oct 13 16:52:33 kblu3 kernel: [ 4.977183] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor B] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.977193] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2B] disabled, scaler_id = -1 Oct 13 16:52:33 kblu3 kernel: [ 4.977206] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 Oct 13 16:52:33 kblu3 kernel: [ 4.977223] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:52:33 kblu3 kernel: [ 4.977235] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:52:33 kblu3 kernel: [ 4.977251] [drm:intel_find_shared_dpll [i915]] [CRTC:26:pipe A] allocated DPLL 0 Oct 13 16:52:33 kblu3 kernel: [ 4.977264] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A Oct 13 16:52:33 kblu3 kernel: [ 4.977276] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:52:33 kblu3 kernel: [ 4.977290] [drm:intel_find_shared_dpll [i915]] [CRTC:30:pipe B] allocated DPLL 1 Oct 13 16:52:33 kblu3 kernel: [ 4.977301] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe B Oct 13 16:52:33 kblu3 kernel: [ 4.977313] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:30:pipe B] scaler_user index 1.31 Oct 13 16:52:33 kblu3 kernel: [ 4.977324] [drm:skl_update_scaler [i915]] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0 Oct 13 16:52:33 kblu3 kernel: [ 4.977355] [drm:intel_edp_backlight_off [i915]] Oct 13 16:52:33 kblu3 kernel: [ 4.997453] usb 1-7: New USB device found, idVendor=0b95, idProduct=7720 Oct 13 16:52:33 kblu3 kernel: [ 4.997454] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 13 16:52:33 kblu3 kernel: [ 4.997455] usb 1-7: Product: AX88x72A Oct 13 16:52:33 kblu3 kernel: [ 4.997456] usb 1-7: Manufacturer: ASIX Elec. Corp. Oct 13 16:52:33 kblu3 kernel: [ 4.997456] usb 1-7: SerialNumber: B07A60 Oct 13 16:52:33 kblu3 kernel: [ 5.052241] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 Oct 13 16:52:33 kblu3 kernel: [ 5.052242] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection Oct 13 16:52:33 kblu3 kernel: [ 5.052357] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF Oct 13 16:52:33 kblu3 kernel: [ 5.052408] initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 759093 usecs Oct 13 16:52:33 kblu3 kernel: [ 5.052954] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 Oct 13 16:52:33 kblu3 kernel: [ 5.183545] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 Oct 13 16:52:33 kblu3 kernel: [ 5.183591] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling Oct 13 16:52:33 kblu3 kernel: [ 5.183652] [drm:intel_disable_pipe [i915]] disabling pipe A Oct 13 16:52:33 kblu3 kernel: [ 5.188260] [drm:intel_edp_panel_off [i915]] Turn eDP port A panel power off Oct 13 16:52:33 kblu3 kernel: [ 5.188342] [drm:intel_edp_panel_off [i915]] Wait for panel power off time Oct 13 16:52:33 kblu3 kernel: [ 5.188433] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 Oct 13 16:52:33 kblu3 kernel: [ 5.239042] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:52:33 kblu3 kernel: [ 5.239071] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 26 Oct 13 16:52:33 kblu3 kernel: [ 5.239091] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 Oct 13 16:52:33 kblu3 kernel: [ 5.239134] [drm:intel_disable_pipe [i915]] disabling pipe B Oct 13 16:52:33 kblu3 kernel: [ 5.243553] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 2, on? 1) for crtc 30 Oct 13 16:52:33 kblu3 kernel: [ 5.243576] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 Oct 13 16:52:33 kblu3 kernel: [ 5.243602] [drm:skl_set_cdclk [i915]] Changing CDCLK to 337500 kHz (VCO 8100000 kHz) Oct 13 16:52:33 kblu3 kernel: [ 5.243627] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz Oct 13 16:52:33 kblu3 kernel: [ 5.243646] [drm:intel_disable_sagv [i915]] Disabling the SAGV Oct 13 16:52:33 kblu3 kernel: [ 5.245871] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] Oct 13 16:52:33 kblu3 kernel: [ 5.245892] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DDI B] Oct 13 16:52:33 kblu3 kernel: [ 5.245910] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DP-MST A] Oct 13 16:52:33 kblu3 kernel: [ 5.245925] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:DP-MST B] Oct 13 16:52:33 kblu3 kernel: [ 5.245939] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:DP-MST C] Oct 13 16:52:33 kblu3 kernel: [ 5.245953] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] Oct 13 16:52:33 kblu3 kernel: [ 5.245968] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] Oct 13 16:52:33 kblu3 kernel: [ 5.245980] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] Oct 13 16:52:33 kblu3 kernel: [ 5.245993] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] Oct 13 16:52:33 kblu3 kernel: [ 5.246039] [drm:verify_connector_state [i915]] [CONNECTOR:46:DP-1] Oct 13 16:52:33 kblu3 kernel: [ 5.246055] [drm:verify_connector_state [i915]] [CONNECTOR:53:DP-2] Oct 13 16:52:33 kblu3 kernel: [ 5.246068] [drm:verify_connector_state [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:52:33 kblu3 kernel: [ 5.246080] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:52:33 kblu3 kernel: [ 5.246093] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:52:33 kblu3 kernel: [ 5.246106] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 2 Oct 13 16:52:33 kblu3 kernel: [ 5.246117] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 3 Oct 13 16:52:33 kblu3 kernel: [ 5.246138] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 26 Oct 13 16:52:33 kblu3 kernel: [ 5.246153] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 Oct 13 16:52:33 kblu3 kernel: [ 5.246181] [drm:edp_panel_on [i915]] Turn eDP port A panel power on Oct 13 16:52:33 kblu3 kernel: [ 5.246213] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle Oct 13 16:52:33 kblu3 kernel: [ 5.271557] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 Oct 13 16:52:33 kblu3 kernel: [ 5.271581] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long Oct 13 16:52:33 kblu3 kernel: [ 5.271601] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 Oct 13 16:52:33 kblu3 kernel: [ 5.271651] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A Oct 13 16:52:33 kblu3 kernel: [ 5.767848] clocksource: Switched to clocksource tsc Oct 13 16:52:33 kblu3 kernel: [ 5.799586] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 Oct 13 16:52:33 kblu3 kernel: [ 5.799621] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:52:33 kblu3 kernel: [ 5.799673] [drm:edp_panel_on [i915]] Wait for panel power on Oct 13 16:52:33 kblu3 kernel: [ 5.799760] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 Oct 13 16:52:33 kblu3 kernel: [ 5.831818] [drm] RC6 on Oct 13 16:52:33 kblu3 kernel: [ 5.890108] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 Oct 13 16:52:33 kblu3 kernel: [ 5.890131] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long Oct 13 16:52:33 kblu3 kernel: [ 5.890150] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1 Oct 13 16:52:33 kblu3 kernel: [ 5.890177] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A Oct 13 16:52:33 kblu3 kernel: [ 6.000689] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:52:33 kblu3 kernel: [ 6.000732] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on Oct 13 16:52:33 kblu3 kernel: [ 6.000812] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b Oct 13 16:52:33 kblu3 kernel: [ 6.002287] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 Oct 13 16:52:33 kblu3 kernel: [ 6.002301] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 Oct 13 16:52:33 kblu3 kernel: [ 6.002314] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 Oct 13 16:52:33 kblu3 kernel: [ 6.002327] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 Oct 13 16:52:33 kblu3 kernel: [ 6.006929] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 01000000 Oct 13 16:52:33 kblu3 kernel: [ 6.006957] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 Oct 13 16:52:33 kblu3 kernel: [ 6.006969] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1 Oct 13 16:52:33 kblu3 kernel: [ 6.011562] [drm:intel_dp_start_link_train [i915]] clock recovery OK Oct 13 16:52:33 kblu3 kernel: [ 6.011592] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 Oct 13 16:52:33 kblu3 kernel: [ 6.016192] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful Oct 13 16:52:33 kblu3 kernel: [ 6.016435] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff88025c480000 Oct 13 16:52:33 kblu3 kernel: [ 6.016666] [drm:intel_enable_pipe [i915]] enabling pipe A Oct 13 16:52:33 kblu3 kernel: [ 6.016684] [drm:intel_edp_backlight_on.part.27 [i915]] Oct 13 16:52:33 kblu3 kernel: [ 6.016702] [drm:intel_panel_enable_backlight [i915]] pipe A Oct 13 16:52:33 kblu3 kernel: [ 6.016789] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 937 Oct 13 16:52:33 kblu3 kernel: [ 6.016859] [drm:intel_psr_enable [i915]] PSR disable by flag Oct 13 16:52:33 kblu3 kernel: [ 6.016873] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS Oct 13 16:52:33 kblu3 kernel: [ 6.033420] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 2, on? 0) for crtc 30 Oct 13 16:52:33 kblu3 kernel: [ 6.033434] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 Oct 13 16:52:33 kblu3 kernel: [ 6.035513] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff88025c480800 Oct 13 16:52:33 kblu3 kernel: [ 6.035745] [drm:intel_enable_pipe [i915]] enabling pipe B Oct 13 16:52:33 kblu3 kernel: [ 6.069194] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:52:33 kblu3 kernel: [ 6.069219] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] Oct 13 16:52:33 kblu3 kernel: [ 6.069247] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:52:33 kblu3 kernel: [ 6.069267] [drm:verify_connector_state [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:52:33 kblu3 kernel: [ 6.069285] [drm:intel_atomic_commit_tail [i915]] [CRTC:30:pipe B] Oct 13 16:52:33 kblu3 kernel: [ 6.069308] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:52:33 kblu3 kernel: [ 6.069325] Console: switching to colour frame buffer device 240x67 Oct 13 16:52:33 kblu3 kernel: [ 6.069359] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:52:33 kblu3 kernel: [ 6.069375] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:52:33 kblu3 kernel: [ 6.089341] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device Oct 13 16:52:33 kblu3 kernel: [ 6.144843] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) Oct 13 16:52:33 kblu3 kernel: [ 6.201090] calling init_autofs4_fs+0x0/0x27 [autofs4] @ 1 Oct 13 16:52:33 kblu3 kernel: [ 6.201126] initcall init_autofs4_fs+0x0/0x27 [autofs4] returned 0 after 32 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.365739] calling parport_default_proc_register+0x0/0x1000 [parport] @ 241 Oct 13 16:52:33 kblu3 kernel: [ 6.365756] initcall parport_default_proc_register+0x0/0x1000 [parport] returned 0 after 12 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.368099] calling lp_init_module+0x0/0x1000 [lp] @ 241 Oct 13 16:52:33 kblu3 kernel: [ 6.371101] lp: driver loaded but no devices found Oct 13 16:52:33 kblu3 kernel: [ 6.372209] initcall lp_init_module+0x0/0x1000 [lp] returned 0 after 4009 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.373734] calling ppdev_init+0x0/0x1000 [ppdev] @ 241 Oct 13 16:52:33 kblu3 kernel: [ 6.380002] ppdev: user-space parallel port driver Oct 13 16:52:33 kblu3 kernel: [ 6.381769] initcall ppdev_init+0x0/0x1000 [ppdev] returned 0 after 7842 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.383951] calling parport_pc_init+0x0/0xf44 [parport_pc] @ 241 Oct 13 16:52:33 kblu3 kernel: [ 6.384386] initcall parport_pc_init+0x0/0xf44 [parport_pc] returned 0 after 420 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.502281] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro Oct 13 16:52:33 kblu3 kernel: [ 6.592287] calling mac_hid_init+0x0/0x1000 [mac_hid] @ 299 Oct 13 16:52:33 kblu3 kernel: [ 6.592304] initcall mac_hid_init+0x0/0x1000 [mac_hid] returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.593363] calling acpi_pad_init+0x0/0x1000 [acpi_pad] @ 298 Oct 13 16:52:33 kblu3 kernel: [ 6.593431] initcall acpi_pad_init+0x0/0x1000 [acpi_pad] returned 0 after 63 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.602028] calling spidev_init+0x0/0x1000 [spidev] @ 298 Oct 13 16:52:33 kblu3 kernel: [ 6.602048] initcall spidev_init+0x0/0x1000 [spidev] returned 0 after 16 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.634014] calling rc_core_init+0x0/0x1000 [rc_core] @ 297 Oct 13 16:52:33 kblu3 kernel: [ 6.634026] initcall rc_core_init+0x0/0x1000 [rc_core] returned 0 after 7 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.635730] calling wbcir_init+0x0/0x1000 [winbond_cir] @ 297 Oct 13 16:52:33 kblu3 kernel: [ 6.635742] initcall wbcir_init+0x0/0x1000 [winbond_cir] returned 0 after 8 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.643552] calling iio_init+0x0/0x1000 [industrialio] @ 309 Oct 13 16:52:33 kblu3 kernel: [ 6.643577] initcall iio_init+0x0/0x1000 [industrialio] returned 0 after 18 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.646548] calling acpi_als_driver_init+0x0/0x1000 [acpi_als] @ 309 Oct 13 16:52:33 kblu3 kernel: [ 6.646609] initcall acpi_als_driver_init+0x0/0x1000 [acpi_als] returned 0 after 56 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.674509] calling shpcd_init+0x0/0x1000 [shpchp] @ 301 Oct 13 16:52:33 kblu3 kernel: [ 6.674531] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Oct 13 16:52:33 kblu3 kernel: [ 6.674534] initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 20 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.674547] calling bt_init+0x0/0xb6 [bluetooth] @ 305 Oct 13 16:52:33 kblu3 kernel: [ 6.674548] Bluetooth: Core ver 2.21 Oct 13 16:52:33 kblu3 kernel: [ 6.674564] NET: Registered protocol family 31 Oct 13 16:52:33 kblu3 kernel: [ 6.674565] Bluetooth: HCI device and connection manager initialized Oct 13 16:52:33 kblu3 kernel: [ 6.674568] Bluetooth: HCI socket layer initialized Oct 13 16:52:33 kblu3 kernel: [ 6.674570] Bluetooth: L2CAP socket layer initialized Oct 13 16:52:33 kblu3 kernel: [ 6.674574] Bluetooth: SCO socket layer initialized Oct 13 16:52:33 kblu3 kernel: [ 6.674589] initcall bt_init+0x0/0xb6 [bluetooth] returned 0 after 26 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.678739] calling mei_init+0x0/0xae [mei] @ 303 Oct 13 16:52:33 kblu3 kernel: [ 6.678758] initcall mei_init+0x0/0xae [mei] returned 0 after 13 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.683629] calling hci_uart_init+0x0/0xf1 [hci_uart] @ 305 Oct 13 16:52:33 kblu3 kernel: [ 6.683631] Bluetooth: HCI UART driver ver 2.3 Oct 13 16:52:33 kblu3 kernel: [ 6.683632] Bluetooth: HCI UART protocol H4 registered Oct 13 16:52:33 kblu3 kernel: [ 6.683633] Bluetooth: HCI UART protocol BCSP registered Oct 13 16:52:33 kblu3 kernel: [ 6.683633] Bluetooth: HCI UART protocol LL registered Oct 13 16:52:33 kblu3 kernel: [ 6.683634] Bluetooth: HCI UART protocol ATH3K registered Oct 13 16:52:33 kblu3 kernel: [ 6.683635] Bluetooth: HCI UART protocol Three-wire (H5) registered Oct 13 16:52:33 kblu3 kernel: [ 6.683663] Bluetooth: HCI UART protocol Intel registered Oct 13 16:52:33 kblu3 kernel: [ 6.683677] Bluetooth: HCI UART protocol BCM registered Oct 13 16:52:33 kblu3 kernel: [ 6.683682] initcall hci_uart_init+0x0/0xf1 [hci_uart] returned 0 after 46 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.684328] calling mei_me_driver_init+0x0/0x1000 [mei_me] @ 303 Oct 13 16:52:33 kblu3 kernel: [ 6.684352] mei_me 0000:00:16.0: enabling device (0000 -> 0002) Oct 13 16:52:33 kblu3 kernel: [ 6.696388] calling btusb_driver_init+0x0/0x1000 [btusb] @ 309 Oct 13 16:52:33 kblu3 kernel: [ 6.696634] calling init_soundcore+0x0/0x1000 [soundcore] @ 313 Oct 13 16:52:33 kblu3 kernel: [ 6.696642] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 4 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.696975] usbcore: registered new interface driver btusb Oct 13 16:52:33 kblu3 kernel: [ 6.696979] initcall btusb_driver_init+0x0/0x1000 [btusb] returned 0 after 573 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.697999] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 Oct 13 16:52:33 kblu3 kernel: [ 6.698635] initcall mei_me_driver_init+0x0/0x1000 [mei_me] returned 0 after 13966 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.699025] Bluetooth: hci0: Device revision is 16 Oct 13 16:52:33 kblu3 kernel: [ 6.699026] Bluetooth: hci0: Secure boot is enabled Oct 13 16:52:33 kblu3 kernel: [ 6.699026] Bluetooth: hci0: OTP lock is disabled Oct 13 16:52:33 kblu3 kernel: [ 6.699027] Bluetooth: hci0: API lock is enabled Oct 13 16:52:33 kblu3 kernel: [ 6.699027] Bluetooth: hci0: Debug lock is disabled Oct 13 16:52:33 kblu3 kernel: [ 6.699028] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 Oct 13 16:52:33 kblu3 kernel: [ 6.700987] bluetooth hci0: Direct firmware load for intel/ibt-12-16.sfi failed with error -2 Oct 13 16:52:33 kblu3 kernel: [ 6.700989] bluetooth hci0: Falling back to user helper Oct 13 16:52:33 kblu3 kernel: [ 6.702266] calling serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 299 Oct 13 16:52:33 kblu3 kernel: [ 6.702284] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 14 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.704794] calling cfg80211_init+0x0/0xdb [cfg80211] @ 312 Oct 13 16:52:33 kblu3 kernel: [ 6.706021] initcall cfg80211_init+0x0/0xdb [cfg80211] returned 0 after 1177 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.710995] calling alsa_sound_init+0x0/0x84 [snd] @ 343 Oct 13 16:52:33 kblu3 kernel: [ 6.711005] initcall alsa_sound_init+0x0/0x84 [snd] returned 0 after 5 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.714506] calling cryptd_init+0x0/0x1000 [cryptd] @ 300 Oct 13 16:52:33 kblu3 kernel: [ 6.714514] initcall cryptd_init+0x0/0x1000 [cryptd] returned 0 after 3 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.720823] calling crypto_module_init+0x0/0x1000 [lrw] @ 303 Oct 13 16:52:33 kblu3 kernel: [ 6.720827] initcall crypto_module_init+0x0/0x1000 [lrw] returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.722402] calling aes_init+0x0/0x1000 [aes_x86_64] @ 300 Oct 13 16:52:33 kblu3 kernel: [ 6.725010] initcall aes_init+0x0/0x1000 [aes_x86_64] returned 0 after 2540 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.726376] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=937/937 Oct 13 16:52:33 kblu3 kernel: [ 6.726396] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 937 Oct 13 16:52:33 kblu3 kernel: [ 6.728952] calling aesni_init+0x0/0x13e [aesni_intel] @ 300 Oct 13 16:52:33 kblu3 kernel: [ 6.728953] AVX2 version of gcm_enc/dec engaged. Oct 13 16:52:33 kblu3 kernel: [ 6.728953] AES CTR mode by8 optimization enabled Oct 13 16:52:33 kblu3 kernel: [ 6.732151] calling iwl_drv_init+0x0/0x8e [iwlwifi] @ 312 Oct 13 16:52:33 kblu3 kernel: [ 6.732153] Intel(R) Wireless WiFi driver for Linux Oct 13 16:52:33 kblu3 kernel: [ 6.732153] Copyright(c) 2003- 2015 Intel Corporation Oct 13 16:52:33 kblu3 kernel: [ 6.732442] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) Oct 13 16:52:33 kblu3 kernel: [ 6.736537] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 Oct 13 16:52:33 kblu3 kernel: [ 6.736539] iwlwifi 0000:01:00.0: Falling back to user helper Oct 13 16:52:33 kblu3 kernel: [ 6.736794] iwlwifi 0000:01:00.0: Unsupported splx structure Oct 13 16:52:33 kblu3 kernel: [ 6.737880] initcall aesni_init+0x0/0x13e [aesni_intel] returned 0 after 8710 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.739571] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 350 Oct 13 16:52:33 kblu3 kernel: [ 6.739755] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 175 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.739812] calling ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] @ 309 Oct 13 16:52:33 kblu3 kernel: [ 6.739876] initcall ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] returned 0 after 58 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.741496] calling alsa_seq_device_init+0x0/0x1000 [snd_seq_device] @ 350 Oct 13 16:52:33 kblu3 kernel: [ 6.741508] initcall alsa_seq_device_init+0x0/0x1000 [snd_seq_device] returned 0 after 9 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.741959] calling crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] @ 307 Oct 13 16:52:33 kblu3 kernel: [ 6.741999] initcall iwl_drv_init+0x0/0x8e [iwlwifi] returned 0 after 9604 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.742532] initcall crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] returned 0 after 556 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.743902] calling crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] @ 307 Oct 13 16:52:33 kblu3 kernel: [ 6.743928] initcall crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] returned 0 after 22 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.766413] calling vmx_init+0x0/0x328 [kvm_intel] @ 307 Oct 13 16:52:33 kblu3 kernel: [ 6.768800] calling alsa_seq_init+0x0/0x48 [snd_seq] @ 382 Oct 13 16:52:33 kblu3 kernel: [ 6.768847] initcall alsa_seq_init+0x0/0x48 [snd_seq] returned 0 after 40 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.769266] initcall vmx_init+0x0/0x328 [kvm_intel] returned 0 after 2779 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.772861] calling coretemp_init+0x0/0x1000 [coretemp] @ 300 Oct 13 16:52:33 kblu3 kernel: [ 6.772974] initcall coretemp_init+0x0/0x1000 [coretemp] returned 0 after 106 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.774593] calling alsa_rawmidi_init+0x0/0x1000 [snd_rawmidi] @ 387 Oct 13 16:52:33 kblu3 kernel: [ 6.774597] initcall alsa_rawmidi_init+0x0/0x1000 [snd_rawmidi] returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.776304] calling powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 300 Oct 13 16:52:33 kblu3 kernel: [ 6.776342] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp] returned 0 after 33 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.778180] calling alsa_seq_midi_event_init+0x0/0x1000 [snd_seq_midi_event] @ 388 Oct 13 16:52:33 kblu3 kernel: [ 6.778183] initcall alsa_seq_midi_event_init+0x0/0x1000 [snd_seq_midi_event] returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.778204] calling pkg_temp_thermal_init+0x0/0x1000 [x86_pkg_temp_thermal] @ 307 Oct 13 16:52:33 kblu3 kernel: [ 6.778251] initcall pkg_temp_thermal_init+0x0/0x1000 [x86_pkg_temp_thermal] returned 0 after 43 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.779670] calling seq_midisynth_driver_init+0x0/0x1000 [snd_seq_midi] @ 388 Oct 13 16:52:33 kblu3 kernel: [ 6.779683] initcall seq_midisynth_driver_init+0x0/0x1000 [snd_seq_midi] returned 0 after 10 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.780411] calling rapl_init+0x0/0x1000 [intel_rapl] @ 309 Oct 13 16:52:33 kblu3 kernel: [ 6.780413] intel_rapl: Found RAPL domain package Oct 13 16:52:33 kblu3 kernel: [ 6.780414] intel_rapl: Found RAPL domain core Oct 13 16:52:33 kblu3 kernel: [ 6.780415] intel_rapl: Found RAPL domain uncore Oct 13 16:52:33 kblu3 kernel: [ 6.780416] intel_rapl: Found RAPL domain dram Oct 13 16:52:33 kblu3 kernel: [ 6.780594] initcall rapl_init+0x0/0x1000 [intel_rapl] returned 0 after 175 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.797462] calling alsa_pcm_init+0x0/0x6c [snd_pcm] @ 392 Oct 13 16:52:33 kblu3 kernel: [ 6.797472] initcall alsa_pcm_init+0x0/0x6c [snd_pcm] returned 0 after 2 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.800875] calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 313 Oct 13 16:52:33 kblu3 kernel: [ 6.800881] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 2 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.802160] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:52:33 kblu3 kernel: [ 6.802182] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:52:33 kblu3 kernel: [ 6.804547] calling hda_bus_init+0x0/0x12 [snd_hda_core] @ 313 Oct 13 16:52:33 kblu3 kernel: [ 6.804559] initcall hda_bus_init+0x0/0x12 [snd_hda_core] returned 0 after 6 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.812356] calling azx_driver_init+0x0/0xfce [snd_hda_intel] @ 313 Oct 13 16:52:33 kblu3 kernel: [ 6.812393] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) Oct 13 16:52:33 kblu3 kernel: [ 6.812552] initcall azx_driver_init+0x0/0xfce [snd_hda_intel] returned 0 after 186 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.816164] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 Oct 13 16:52:33 kblu3 kernel: [ 6.816165] iwlwifi 0000:01:00.0: Falling back to user helper Oct 13 16:52:33 kblu3 kernel: [ 6.816945] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) Oct 13 16:52:33 kblu3 kernel: [ 6.820982] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:52:33 kblu3 kernel: [ 6.821004] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:52:33 kblu3 kernel: [ 6.825715] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-22.ucode failed with error -2 Oct 13 16:52:33 kblu3 kernel: [ 6.825716] iwlwifi 0000:01:00.0: Falling back to user helper Oct 13 16:52:33 kblu3 kernel: [ 6.826011] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-21.ucode failed with error -2 Oct 13 16:52:33 kblu3 kernel: [ 6.826012] iwlwifi 0000:01:00.0: Falling back to user helper Oct 13 16:52:33 kblu3 kernel: [ 6.826254] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-20.ucode failed with error -2 Oct 13 16:52:33 kblu3 kernel: [ 6.826255] iwlwifi 0000:01:00.0: Falling back to user helper Oct 13 16:52:33 kblu3 kernel: [ 6.826534] iwlwifi 0000:01:00.0: no suitable firmware found! Oct 13 16:52:33 kblu3 kernel: [ 6.841322] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 422 Oct 13 16:52:33 kblu3 kernel: [ 6.841338] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 11 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.845718] calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 306 Oct 13 16:52:33 kblu3 kernel: [ 6.846075] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC286: line_outs=2 (0x17/0x14/0x0/0x0/0x0) type:speaker Oct 13 16:52:33 kblu3 kernel: [ 6.846077] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) Oct 13 16:52:33 kblu3 kernel: [ 6.846078] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) Oct 13 16:52:33 kblu3 kernel: [ 6.846079] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 Oct 13 16:52:33 kblu3 kernel: [ 6.846080] snd_hda_codec_realtek hdaudioC0D0: inputs: Oct 13 16:52:33 kblu3 kernel: [ 6.846082] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 Oct 13 16:52:33 kblu3 kernel: [ 6.853655] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 7730 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.854880] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k SSFS Oct 13 16:52:33 kblu3 kernel: [ 6.857076] calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 306 Oct 13 16:52:33 kblu3 kernel: [ 6.860177] [drm:i915_audio_component_get_eld [i915]] Not valid for port B Oct 13 16:52:33 kblu3 kernel: [ 6.860199] [drm:i915_audio_component_get_eld [i915]] Not valid for port C Oct 13 16:52:33 kblu3 kernel: [ 6.860217] [drm:i915_audio_component_get_eld [i915]] Not valid for port D Oct 13 16:52:33 kblu3 kernel: [ 6.860251] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 3094 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.861602] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 Oct 13 16:52:33 kblu3 kernel: [ 6.862684] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 Oct 13 16:52:33 kblu3 kernel: [ 6.862756] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 Oct 13 16:52:33 kblu3 kernel: [ 6.862826] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 Oct 13 16:52:33 kblu3 kernel: [ 6.862895] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 Oct 13 16:52:33 kblu3 kernel: [ 6.902716] calling init_nls_iso8859_1+0x0/0x1000 [nls_iso8859_1] @ 463 Oct 13 16:52:33 kblu3 kernel: [ 6.902719] initcall init_nls_iso8859_1+0x0/0x1000 [nls_iso8859_1] returned 0 after 0 usecs Oct 13 16:52:33 kblu3 kernel: [ 6.999348] audit: type=1400 audit(1476370353.360:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=565 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.002664] audit: type=1400 audit(1476370353.364:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=562 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.002670] audit: type=1400 audit(1476370353.364:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=562 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.002674] audit: type=1400 audit(1476370353.364:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=562 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.002677] audit: type=1400 audit(1476370353.364:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=562 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.004885] audit: type=1400 audit(1476370353.368:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=567 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.005232] audit: type=1400 audit(1476370353.368:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=561 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.005237] audit: type=1400 audit(1476370353.368:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=561 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.005309] audit: type=1400 audit(1476370353.368:10): apparmor="STATUS" operation="profile_load" name="webbrowser-app" pid=566 comm="apparmor_parser" Oct 13 16:52:33 kblu3 kernel: [ 7.224311] random: crng init done Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6029] NetworkManager (version 1.2.2) is starting... Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6031] Read config: /etc/NetworkManager/NetworkManager.conf (etc: default-wifi-powersave-on.conf) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6082] manager[0x20971a0]: monitoring kernel firmware directory '/lib/firmware'. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6082] monitoring ifupdown state file '/run/network/ifstate'. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6161] dns-mgr[0x20a98e0]: set resolv-conf-mode: dnsmasq, plugin="dnsmasq" Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6161] dns-mgr[0x20a98e0]: using resolv.conf manager 'resolvconf' Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6956] init! Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6959] management mode: unmanaged Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6962] devices added (path: /sys/devices/pci0000:00/0000:00:1f.6/net/enp0s31f6, iface: enp0s31f6) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6962] device added (path: /sys/devices/pci0000:00/0000:00:1f.6/net/enp0s31f6, iface: enp0s31f6): no ifupdown configuration found. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6962] devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6962] device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6962] end _init. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6962] settings: loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-settings-plugin-ifupdown.so) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6963] settings: loaded plugin keyfile: (c) 2007 - 2015 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6972] SettingsPlugin-Ofono: init! Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6973] SettingsPlugin-Ofono: file doesn't exist: /var/lib/ofono Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6973] SettingsPlugin-Ofono: end _init. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6973] settings: loaded plugin ofono: (C) 2013-2016 Canonical Ltd. To report bugs please use the NetworkManager mailing list. (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-settings-plugin-ofono.so) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6973] (34317136) ... get_connections. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6973] (34317136) ... get_connections (managed=false): return empty list. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6976] SettingsPlugin-Ofono: (34317360) ... get_connections. Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6976] SettingsPlugin-Ofono: (34317360) connections count: 0 Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.6976] get unmanaged devices count: 0 Oct 13 16:52:33 kblu3 kernel: [ 7.324325] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:52:33 kblu3 kernel: [ 7.324347] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7433] settings: hostname: using hostnamed Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7433] settings: hostname changed from (none) to "KBLU3" Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7435] Using DHCP client 'dhclient' Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7436] manager: WiFi enabled by radio killswitch; enabled by state file Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7436] manager: WWAN enabled by radio killswitch; enabled by state file Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7436] manager: Networking is enabled by state file Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7436] Loaded device plugin: NMVxlanFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7437] Loaded device plugin: NMVlanFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7437] Loaded device plugin: NMVethFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7437] Loaded device plugin: NMTunFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7437] Loaded device plugin: NMMacvlanFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7438] Loaded device plugin: NMIPTunnelFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7438] Loaded device plugin: NMInfinibandFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7438] Loaded device plugin: NMEthernetFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7438] Loaded device plugin: NMBridgeFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7438] Loaded device plugin: NMBondFactory (internal) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7485] Loaded device plugin: NMWifiFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wifi.so) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7525] Loaded device plugin: NMWwanFactory (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-wwan.so) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7562] Loaded device plugin: NMBluezManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-bluetooth.so) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7581] Loaded device plugin: NMAtmManager (/usr/lib/x86_64-linux-gnu/NetworkManager/libnm-device-plugin-adsl.so) Oct 13 16:52:33 kblu3 NetworkManager[668]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7597] device (lo): link connected Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7602] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/0) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7611] manager: (enp0s31f6): new Ethernet device (/org/freedesktop/NetworkManager/Devices/1) Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7620] keyfile: add connection in-memory (61d28073-773f-3b13-ad92-14dff7b06c33,"Wired connection 1") Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7625] settings: (enp0s31f6): created default wired connection 'Wired connection 1' Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.7634] device (enp0s31f6): state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 13 16:52:33 kblu3 kernel: [ 7.395201] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready Oct 13 16:52:33 kblu3 kernel: [ 7.611743] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.9856] urfkill disappeared from the bus Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.9865] ofono is now available Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.9871] failed to enumerate oFono devices: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files Oct 13 16:52:33 kblu3 NetworkManager[668]: [1476370353.9873] ModemManager available in the bus Oct 13 16:52:34 kblu3 kernel: [ 7.730958] calling usbnet_init+0x0/0x1000 [usbnet] @ 299 Oct 13 16:52:34 kblu3 kernel: [ 7.730963] initcall usbnet_init+0x0/0x1000 [usbnet] returned 0 after 0 usecs Oct 13 16:52:34 kblu3 kernel: [ 7.732401] calling asix_driver_init+0x0/0x1000 [asix] @ 299 Oct 13 16:52:34 kblu3 NetworkManager[668]: [1476370354.9178] device (eth0): failed to find device 3 'eth0' with udev Oct 13 16:52:34 kblu3 NetworkManager[668]: [1476370354.9185] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2) Oct 13 16:52:34 kblu3 kernel: [ 8.549115] asix 1-7:1.0 eth0: register 'asix' at usb-0000:00:14.0-7, ASIX AX88772 USB 2.0 Ethernet, 00:14:d1:b0:7a:60 Oct 13 16:52:34 kblu3 kernel: [ 8.549165] usbcore: registered new interface driver asix Oct 13 16:52:34 kblu3 kernel: [ 8.549172] initcall asix_driver_init+0x0/0x1000 [asix] returned 0 after 797621 usecs Oct 13 16:52:34 kblu3 kernel: [ 8.552943] asix 1-7:1.0 enx0014d1b07a60: renamed from eth0 Oct 13 16:52:34 kblu3 NetworkManager[668]: [1476370354.9483] device (eth0): interface index 3 renamed iface from 'eth0' to 'enx0014d1b07a60' Oct 13 16:52:34 kblu3 NetworkManager[668]: [1476370354.9517] devices added (path: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/net/enx0014d1b07a60, iface: enx0014d1b07a60) Oct 13 16:52:34 kblu3 NetworkManager[668]: [1476370354.9517] device added (path: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/net/enx0014d1b07a60, iface: enx0014d1b07a60): no ifupdown configuration found. Oct 13 16:52:34 kblu3 NetworkManager[668]: [1476370354.9519] device (enx0014d1b07a60): state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 13 16:52:34 kblu3 NetworkManager[668]: [1476370354.9541] keyfile: add connection in-memory (1f5fd76b-69ea-38b2-b961-dcfd65fe4016,"Wired connection 2") Oct 13 16:52:34 kblu3 NetworkManager[668]: [1476370354.9546] settings: (enx0014d1b07a60): created default wired connection 'Wired connection 2' Oct 13 16:52:34 kblu3 kernel: [ 8.583648] IPv6: ADDRCONF(NETDEV_UP): enx0014d1b07a60: link is not ready Oct 13 16:52:34 kblu3 kernel: [ 8.584014] asix 1-7:1.0 enx0014d1b07a60: link down Oct 13 16:52:34 kblu3 kernel: [ 8.584557] IPv6: ADDRCONF(NETDEV_UP): enx0014d1b07a60: link is not ready Oct 13 16:52:35 kblu3 kernel: [ 9.191585] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off Oct 13 16:52:35 kblu3 kernel: [ 9.191653] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7168] device (enx0014d1b07a60): link connected Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7185] device (enx0014d1b07a60): state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7192] policy: auto-activating connection 'Wired connection 2' Oct 13 16:52:36 kblu3 kernel: [ 10.348119] IPv6: ADDRCONF(NETDEV_CHANGE): enx0014d1b07a60: link becomes ready Oct 13 16:52:36 kblu3 kernel: [ 10.348516] asix 1-7:1.0 enx0014d1b07a60: link up, 100Mbps, full-duplex, lpa 0xC5E1 Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7200] device (enx0014d1b07a60): Activation: starting connection 'Wired connection 2' (1f5fd76b-69ea-38b2-b961-dcfd65fe4016) Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7203] device (enx0014d1b07a60): state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7204] manager: NetworkManager state is now CONNECTING Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7208] device (enx0014d1b07a60): state change: prepare -> config (reason 'none') [40 50 0] Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7212] device (enx0014d1b07a60): state change: config -> ip-config (reason 'none') [50 70 0] Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7232] dhcp4 (enx0014d1b07a60): activation: beginning transaction (timeout in 45 seconds) Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.7470] dhcp4 (enx0014d1b07a60): dhclient started with pid 856 Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8735] address 10.102.162.199 Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8735] plen 22 (255.255.252.0) Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] gateway 10.102.160.1 Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] server identifier 163.33.253.68 Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] lease time 43200 Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] nameserver '10.248.2.1' Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] nameserver '10.216.46.196' Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] nameserver '163.33.253.68' Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] domain name 'tl.intel.com' Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] wins '143.185.63.31' Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] wins '163.33.7.86' Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8736] dhcp4 (enx0014d1b07a60): state changed unknown -> bound Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8747] device (enx0014d1b07a60): state change: ip-config -> ip-check (reason 'none') [70 80 0] Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8752] device (enx0014d1b07a60): state change: ip-check -> secondaries (reason 'none') [80 90 0] Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8755] device (enx0014d1b07a60): state change: secondaries -> activated (reason 'none') [90 100 0] Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.8756] manager: NetworkManager state is now CONNECTED_LOCAL Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.9134] manager: NetworkManager state is now CONNECTED_GLOBAL Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.9135] policy: set 'Wired connection 2' (enx0014d1b07a60) as default for IPv4 routing and DNS Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.9146] dns-plugin[0x20a43a0]: starting dnsmasq... Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.9175] dns-mgr: Writing DNS information to /sbin/resolvconf Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.9577] device (enx0014d1b07a60): Activation: successful, device activated. Oct 13 16:52:36 kblu3 NetworkManager[668]: [1476370356.9591] dnsmasq[0x20a43a0]: dnsmasq appeared as :1.18 Oct 13 16:52:38 kblu3 kernel: [ 12.400127] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:52:38 kblu3 kernel: [ 12.400142] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:52:42 kblu3 NetworkManager[668]: [1476370362.3833] manager: startup complete Oct 13 16:52:43 kblu3 NetworkManager[668]: [1476370363.3819] WiFi hardware radio set enabled Oct 13 16:52:43 kblu3 NetworkManager[668]: [1476370363.3819] WWAN hardware radio set enabled Oct 13 16:53:34 kblu3 kernel: [ 68.583556] Bluetooth: hci0: Failed to load Intel firmware file (-11) Oct 13 16:53:34 kblu3 kernel: [ 68.585175] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 Oct 13 16:53:34 kblu3 kernel: [ 68.586078] Bluetooth: hci0: Device revision is 16 Oct 13 16:53:34 kblu3 kernel: [ 68.586079] Bluetooth: hci0: Secure boot is enabled Oct 13 16:53:34 kblu3 kernel: [ 68.586079] Bluetooth: hci0: OTP lock is disabled Oct 13 16:53:34 kblu3 kernel: [ 68.586093] Bluetooth: hci0: API lock is enabled Oct 13 16:53:34 kblu3 kernel: [ 68.586093] Bluetooth: hci0: Debug lock is disabled Oct 13 16:53:34 kblu3 kernel: [ 68.586094] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 Oct 13 16:53:34 kblu3 kernel: [ 68.586107] bluetooth hci0: Direct firmware load for intel/ibt-12-16.sfi failed with error -2 Oct 13 16:53:34 kblu3 kernel: [ 68.586108] bluetooth hci0: Falling back to user helper Oct 13 16:54:36 kblu3 kernel: [ 130.023619] Bluetooth: hci0: Failed to load Intel firmware file (-11) Oct 13 16:54:36 kblu3 kernel: [ 130.074011] calling bnep_init+0x0/0x71 [bnep] @ 1999 Oct 13 16:54:36 kblu3 kernel: [ 130.074015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 13 16:54:36 kblu3 kernel: [ 130.074017] Bluetooth: BNEP filters: protocol multicast Oct 13 16:54:36 kblu3 kernel: [ 130.074023] Bluetooth: BNEP socket layer initialized Oct 13 16:54:36 kblu3 kernel: [ 130.074031] initcall bnep_init+0x0/0x71 [bnep] returned 0 after 10 usecs Oct 13 16:54:36 kblu3 NetworkManager[668]: [1476370476.4469] bluez: use BlueZ version 5 Oct 13 16:57:15 kblu3 kernel: [ 289.378144] [drm:i915_gem_open [i915]] Oct 13 16:57:15 kblu3 kernel: [ 289.378314] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:15 kblu3 kernel: [ 289.378358] [drm:_i915_gem_object_create_stolen [i915]] offset=0x0, size=16384 Oct 13 16:57:15 kblu3 kernel: [ 289.378706] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:15 kblu3 kernel: [ 289.378750] [drm:_i915_gem_object_create_stolen [i915]] offset=0x4000, size=16384 Oct 13 16:57:15 kblu3 kernel: [ 289.378878] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:15 kblu3 kernel: [ 289.378913] [drm:_i915_gem_object_create_stolen [i915]] offset=0x8000, size=16384 Oct 13 16:57:15 kblu3 kernel: [ 289.378991] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:15 kblu3 kernel: [ 289.379025] [drm:_i915_gem_object_create_stolen [i915]] offset=0xc000, size=16384 Oct 13 16:57:15 kblu3 kernel: [ 289.379429] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:15 kblu3 kernel: [ 289.379471] [drm:_i915_gem_object_create_stolen [i915]] offset=0x10000, size=16384 Oct 13 16:57:15 kblu3 kernel: [ 289.379792] [drm:i915_gem_open [i915]] Oct 13 16:57:15 kblu3 kernel: [ 289.379982] Setting dangerous option enable_fbc - tainting kernel Oct 13 16:57:15 kblu3 kernel: [ 289.380008] Setting dangerous option enable_psr - tainting kernel Oct 13 16:57:15 kblu3 kernel: [ 289.380017] Setting dangerous option enable_psr - tainting kernel Oct 13 16:57:15 kblu3 kernel: [ 289.380067] [drm:i915_gem_open [i915]] Oct 13 16:57:15 kblu3 kernel: [ 289.380196] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] Oct 13 16:57:15 kblu3 kernel: [ 289.380264] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 Oct 13 16:57:15 kblu3 kernel: [ 289.380320] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:57:15 kblu3 kernel: [ 289.380368] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:15 kblu3 kernel: [ 289.380448] [drm:intel_edp_backlight_off [i915]] Oct 13 16:57:15 kblu3 kernel: [ 289.587419] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 Oct 13 16:57:15 kblu3 kernel: [ 289.587539] [drm:intel_disable_pipe [i915]] disabling pipe A Oct 13 16:57:15 kblu3 kernel: [ 289.593594] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on Oct 13 16:57:15 kblu3 kernel: [ 289.593718] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b Oct 13 16:57:15 kblu3 kernel: [ 289.594021] [drm:intel_edp_panel_off [i915]] Turn eDP port A panel power off Oct 13 16:57:15 kblu3 kernel: [ 289.594111] [drm:intel_edp_panel_off [i915]] Wait for panel power off time Oct 13 16:57:15 kblu3 kernel: [ 289.594238] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 Oct 13 16:57:16 kblu3 kernel: [ 289.646163] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:16 kblu3 kernel: [ 289.646240] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 26 Oct 13 16:57:16 kblu3 kernel: [ 289.646298] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 Oct 13 16:57:16 kblu3 kernel: [ 289.646377] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] Oct 13 16:57:16 kblu3 kernel: [ 289.646432] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DDI B] Oct 13 16:57:16 kblu3 kernel: [ 289.646478] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DP-MST A] Oct 13 16:57:16 kblu3 kernel: [ 289.646522] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:DP-MST B] Oct 13 16:57:16 kblu3 kernel: [ 289.646564] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:DP-MST C] Oct 13 16:57:16 kblu3 kernel: [ 289.646605] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] Oct 13 16:57:16 kblu3 kernel: [ 289.646645] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] Oct 13 16:57:16 kblu3 kernel: [ 289.646684] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] Oct 13 16:57:16 kblu3 kernel: [ 289.646723] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] Oct 13 16:57:16 kblu3 kernel: [ 289.646771] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:16 kblu3 kernel: [ 289.646819] [drm:verify_connector_state [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:16 kblu3 kernel: [ 289.646869] [drm:verify_connector_state [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:16 kblu3 kernel: [ 289.646911] [drm:verify_connector_state [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:16 kblu3 kernel: [ 289.646952] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:16 kblu3 kernel: [ 289.646993] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:57:16 kblu3 kernel: [ 289.647035] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 2 Oct 13 16:57:16 kblu3 kernel: [ 289.647074] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 3 Oct 13 16:57:16 kblu3 kernel: [ 289.652684] [drm:intel_power_well_disable [i915]] disabling DDI A/E power well Oct 13 16:57:16 kblu3 kernel: [ 289.652730] [drm:skl_set_power_well [i915]] Disabling DDI A/E power well Oct 13 16:57:16 kblu3 kernel: [ 289.652800] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] Oct 13 16:57:16 kblu3 kernel: [ 289.652851] [drm:intel_enable_sagv [i915]] Enabling the SAGV Oct 13 16:57:16 kblu3 kernel: [ 289.652903] [drm:drm_mode_setcrtc] [CRTC:30:pipe B] Oct 13 16:57:16 kblu3 kernel: [ 289.652981] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 Oct 13 16:57:16 kblu3 kernel: [ 289.653043] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:57:16 kblu3 kernel: [ 289.653098] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:30:pipe B] scaler_user index 1.31 Oct 13 16:57:16 kblu3 kernel: [ 289.653194] [drm:intel_disable_pipe [i915]] disabling pipe B Oct 13 16:57:16 kblu3 kernel: [ 289.670653] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 2, on? 1) for crtc 30 Oct 13 16:57:16 kblu3 kernel: [ 289.670719] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 Oct 13 16:57:16 kblu3 kernel: [ 289.670803] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] Oct 13 16:57:16 kblu3 kernel: [ 289.670859] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DDI B] Oct 13 16:57:16 kblu3 kernel: [ 289.670909] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DP-MST A] Oct 13 16:57:16 kblu3 kernel: [ 289.670954] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:DP-MST B] Oct 13 16:57:16 kblu3 kernel: [ 289.670997] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:DP-MST C] Oct 13 16:57:16 kblu3 kernel: [ 289.671038] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] Oct 13 16:57:16 kblu3 kernel: [ 289.671079] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] Oct 13 16:57:16 kblu3 kernel: [ 289.671119] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] Oct 13 16:57:16 kblu3 kernel: [ 289.671158] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] Oct 13 16:57:16 kblu3 kernel: [ 289.671207] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:16 kblu3 kernel: [ 289.671324] [drm:verify_connector_state [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:16 kblu3 kernel: [ 289.671389] [drm:verify_connector_state [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:57:16 kblu3 kernel: [ 289.671453] [drm:verify_connector_state [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:16 kblu3 kernel: [ 289.671514] [drm:verify_connector_state [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:16 kblu3 kernel: [ 289.671575] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:16 kblu3 kernel: [ 289.671637] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:57:16 kblu3 kernel: [ 289.671696] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 2 Oct 13 16:57:16 kblu3 kernel: [ 289.671748] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 3 Oct 13 16:57:16 kblu3 kernel: [ 289.671796] [drm:intel_power_well_disable [i915]] disabling DDI B power well Oct 13 16:57:16 kblu3 kernel: [ 289.671835] [drm:skl_set_power_well [i915]] Disabling DDI B power well Oct 13 16:57:16 kblu3 kernel: [ 289.671873] [drm:intel_power_well_disable [i915]] disabling power well 2 Oct 13 16:57:16 kblu3 kernel: [ 289.671920] [drm:skl_set_power_well [i915]] Disabling power well 2 Oct 13 16:57:16 kblu3 kernel: [ 289.671972] [drm:intel_atomic_commit_tail [i915]] [CRTC:30:pipe B] Oct 13 16:57:16 kblu3 kernel: [ 289.672011] [drm:intel_power_well_disable [i915]] disabling DC off Oct 13 16:57:16 kblu3 kernel: [ 289.672049] [drm:skl_enable_dc6 [i915]] Enabling DC6 Oct 13 16:57:16 kblu3 kernel: [ 289.672084] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 Oct 13 16:57:16 kblu3 kernel: [ 289.672520] [drm:intel_power_well_disable [i915]] disabling always-on Oct 13 16:57:16 kblu3 kernel: [ 289.672567] [drm:drm_mode_setcrtc] [CRTC:34:pipe C] Oct 13 16:57:16 kblu3 kernel: [ 289.677593] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 Oct 13 16:57:16 kblu3 kernel: [ 289.677668] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long Oct 13 16:57:16 kblu3 kernel: [ 289.677734] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 Oct 13 16:57:16 kblu3 kernel: [ 289.678074] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A Oct 13 16:57:21 kblu3 kernel: [ 294.681616] [drm:drm_mode_addfb2] [FB:58] Oct 13 16:57:21 kblu3 kernel: [ 294.702688] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] Oct 13 16:57:21 kblu3 kernel: [ 294.702694] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] Oct 13 16:57:21 kblu3 kernel: [ 294.702734] [drm:intel_atomic_check [i915]] [CONNECTOR:37:eDP-1] checking for sink bpp constrains Oct 13 16:57:21 kblu3 kernel: [ 294.702756] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 Oct 13 16:57:21 kblu3 kernel: [ 294.702780] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:21 kblu3 kernel: [ 294.702801] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 241500KHz Oct 13 16:57:21 kblu3 kernel: [ 294.702825] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 4 clock 270000 bpp 24 Oct 13 16:57:21 kblu3 kernel: [ 294.702844] [drm:intel_dp_compute_config [i915]] DP link bw required 579600 available 864000 Oct 13 16:57:21 kblu3 kernel: [ 294.702863] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 Oct 13 16:57:21 kblu3 kernel: [ 294.702884] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][modeset] config ffff880260da3800 for pipe A Oct 13 16:57:21 kblu3 kernel: [ 294.702902] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP Oct 13 16:57:21 kblu3 kernel: [ 294.702918] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:57:21 kblu3 kernel: [ 294.702934] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:21 kblu3 kernel: [ 294.702950] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m: 5627357, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64 Oct 13 16:57:21 kblu3 kernel: [ 294.702965] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:57:21 kblu3 kernel: [ 294.702979] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:57:21 kblu3 kernel: [ 294.702994] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:57:21 kblu3 kernel: [ 294.702998] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:57:21 kblu3 kernel: [ 294.703012] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:57:21 kblu3 kernel: [ 294.703016] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:57:21 kblu3 kernel: [ 294.703031] [drm:intel_dump_pipe_config [i915]] crtc timings: 241500 2560 2608 2640 2720 1440 1442 1447 1480, type: 0x48 flags: 0xa Oct 13 16:57:21 kblu3 kernel: [ 294.703045] [drm:intel_dump_pipe_config [i915]] port clock: 270000 Oct 13 16:57:21 kblu3 kernel: [ 294.703059] [drm:intel_dump_pipe_config [i915]] pipe src size: 2560x1440 Oct 13 16:57:21 kblu3 kernel: [ 294.703073] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 Oct 13 16:57:21 kblu3 kernel: [ 294.703087] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:57:21 kblu3 kernel: [ 294.703102] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:57:21 kblu3 kernel: [ 294.703115] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:57:21 kblu3 kernel: [ 294.703129] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:57:21 kblu3 kernel: [ 294.703142] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:57:21 kblu3 kernel: [ 294.703156] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:57:21 kblu3 kernel: [ 294.703170] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] disabled, scaler_id = -1 Oct 13 16:57:21 kblu3 kernel: [ 294.703191] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 Oct 13 16:57:21 kblu3 kernel: [ 294.703206] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 Oct 13 16:57:21 kblu3 kernel: [ 294.703226] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 Oct 13 16:57:21 kblu3 kernel: [ 294.703257] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:57:21 kblu3 kernel: [ 294.703281] [drm:intel_find_shared_dpll [i915]] [CRTC:26:pipe A] allocated DPLL 0 Oct 13 16:57:21 kblu3 kernel: [ 294.703305] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A Oct 13 16:57:21 kblu3 kernel: [ 294.703330] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:21 kblu3 kernel: [ 294.704149] [drm:intel_power_well_enable [i915]] enabling always-on Oct 13 16:57:21 kblu3 kernel: [ 294.704164] [drm:intel_power_well_enable [i915]] enabling DC off Oct 13 16:57:21 kblu3 kernel: [ 294.704440] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00 Oct 13 16:57:21 kblu3 kernel: [ 294.704460] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well Oct 13 16:57:21 kblu3 kernel: [ 294.704475] [drm:skl_set_power_well [i915]] Enabling DDI A/E power well Oct 13 16:57:21 kblu3 kernel: [ 294.704498] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] Oct 13 16:57:21 kblu3 kernel: [ 294.704516] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DDI B] Oct 13 16:57:21 kblu3 kernel: [ 294.704534] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DP-MST A] Oct 13 16:57:21 kblu3 kernel: [ 294.704550] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:DP-MST B] Oct 13 16:57:21 kblu3 kernel: [ 294.704565] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:DP-MST C] Oct 13 16:57:21 kblu3 kernel: [ 294.704580] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] Oct 13 16:57:21 kblu3 kernel: [ 294.704596] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] Oct 13 16:57:21 kblu3 kernel: [ 294.704610] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] Oct 13 16:57:21 kblu3 kernel: [ 294.704625] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] Oct 13 16:57:21 kblu3 kernel: [ 294.704643] [drm:verify_connector_state [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:21 kblu3 kernel: [ 294.704660] [drm:verify_connector_state [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:57:21 kblu3 kernel: [ 294.704676] [drm:verify_connector_state [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:21 kblu3 kernel: [ 294.704692] [drm:verify_connector_state [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:21 kblu3 kernel: [ 294.704707] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:21 kblu3 kernel: [ 294.704723] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:57:21 kblu3 kernel: [ 294.704739] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 2 Oct 13 16:57:21 kblu3 kernel: [ 294.704754] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 3 Oct 13 16:57:21 kblu3 kernel: [ 294.704775] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 26 Oct 13 16:57:21 kblu3 kernel: [ 294.704792] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 Oct 13 16:57:21 kblu3 kernel: [ 294.704823] [drm:edp_panel_on [i915]] Turn eDP port A panel power on Oct 13 16:57:21 kblu3 kernel: [ 294.704856] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle Oct 13 16:57:21 kblu3 kernel: [ 294.704948] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 Oct 13 16:57:21 kblu3 kernel: [ 294.704980] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:21 kblu3 kernel: [ 294.705031] [drm:edp_panel_on [i915]] Wait for panel power on Oct 13 16:57:21 kblu3 kernel: [ 294.705121] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 Oct 13 16:57:21 kblu3 kernel: [ 294.795695] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 Oct 13 16:57:21 kblu3 kernel: [ 294.795760] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long Oct 13 16:57:21 kblu3 kernel: [ 294.795816] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 Oct 13 16:57:21 kblu3 kernel: [ 294.795959] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A Oct 13 16:57:21 kblu3 kernel: [ 294.907377] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:21 kblu3 kernel: [ 294.907477] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on Oct 13 16:57:21 kblu3 kernel: [ 294.907595] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b Oct 13 16:57:21 kblu3 kernel: [ 294.909103] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 Oct 13 16:57:21 kblu3 kernel: [ 294.909149] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 Oct 13 16:57:21 kblu3 kernel: [ 294.909192] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 Oct 13 16:57:21 kblu3 kernel: [ 294.909237] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 Oct 13 16:57:21 kblu3 kernel: [ 294.913904] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 01000000 Oct 13 16:57:21 kblu3 kernel: [ 294.913947] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 Oct 13 16:57:21 kblu3 kernel: [ 294.913987] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1 Oct 13 16:57:21 kblu3 kernel: [ 294.918604] [drm:intel_dp_start_link_train [i915]] clock recovery OK Oct 13 16:57:21 kblu3 kernel: [ 294.918642] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 Oct 13 16:57:21 kblu3 kernel: [ 294.923266] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful Oct 13 16:57:21 kblu3 kernel: [ 294.923496] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff880260da3800 Oct 13 16:57:21 kblu3 kernel: [ 294.924052] [drm:intel_enable_pipe [i915]] enabling pipe A Oct 13 16:57:21 kblu3 kernel: [ 294.924100] [drm:intel_edp_backlight_on.part.27 [i915]] Oct 13 16:57:21 kblu3 kernel: [ 294.924139] [drm:intel_panel_enable_backlight [i915]] pipe A Oct 13 16:57:21 kblu3 kernel: [ 294.924253] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 937 Oct 13 16:57:21 kblu3 kernel: [ 294.924534] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS Oct 13 16:57:21 kblu3 kernel: [ 294.940839] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:21 kblu3 kernel: [ 294.940881] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] Oct 13 16:57:21 kblu3 kernel: [ 294.940938] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:21 kblu3 kernel: [ 295.102493] PM: Syncing filesystems ... done. Oct 13 16:57:21 kblu3 kernel: [ 295.110007] PM: Preparing system for sleep (mem) Oct 13 16:57:38 kblu3 kernel: [ 295.113091] Freezing user space processes ... (elapsed 0.001 seconds) done. Oct 13 16:57:38 kblu3 kernel: [ 295.114787] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) Oct 13 16:57:38 kblu3 kernel: [ 295.114928] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Oct 13 16:57:38 kblu3 kernel: [ 295.116411] PM: Suspending system (mem) Oct 13 16:57:38 kblu3 kernel: [ 295.116459] Suspending console(s) (use no_console_suspend to debug) Oct 13 16:57:38 kblu3 kernel: [ 295.243312] calling input10+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 295.243315] call input10+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243318] calling input9+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 295.243319] call input9+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243322] calling input8+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 295.243323] call input8+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243326] calling input7+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 295.243327] call input7+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243330] calling input6+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 295.243331] call input6+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243363] calling coretemp.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.243364] call coretemp.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243369] calling regulatory.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.243370] call regulatory.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243381] calling rfkill0+ @ 3378, parent: hci0 Oct 13 16:57:38 kblu3 kernel: [ 295.243383] call rfkill0+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243410] calling hdaudioC0D2+ @ 57, parent: 0000:00:1f.3 Oct 13 16:57:38 kblu3 kernel: [ 295.243412] calling input5+ @ 3378, parent: LNXVIDEO:00 Oct 13 16:57:38 kblu3 kernel: [ 295.243414] call hdaudioC0D2+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243416] call input5+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243420] calling hdaudioC0D0+ @ 57, parent: 0000:00:1f.3 Oct 13 16:57:38 kblu3 kernel: [ 295.243426] calling intel_backlight+ @ 3378, parent: card0-eDP-1 Oct 13 16:57:38 kblu3 kernel: [ 295.243428] call intel_backlight+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243440] calling 1-7+ @ 6, parent: usb1 Oct 13 16:57:38 kblu3 kernel: [ 295.243447] calling mmc1::+ @ 3378, parent: 0000:00:1e.6 Oct 13 16:57:38 kblu3 kernel: [ 295.243449] call mmc1::+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243452] calling mmc0::+ @ 3378, parent: 0000:00:1e.4 Oct 13 16:57:38 kblu3 kernel: [ 295.243453] call mmc0::+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243498] calling input4::scrolllock+ @ 3378, parent: input4 Oct 13 16:57:38 kblu3 kernel: [ 295.243500] call input4::scrolllock+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243502] calling input4::capslock+ @ 3378, parent: input4 Oct 13 16:57:38 kblu3 kernel: [ 295.243503] call input4::capslock+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243505] calling input4::numlock+ @ 3378, parent: input4 Oct 13 16:57:38 kblu3 kernel: [ 295.243507] call input4::numlock+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243510] calling input4+ @ 3378, parent: serio0 Oct 13 16:57:38 kblu3 kernel: [ 295.243512] call input4+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243518] calling microcode+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.243520] call microcode+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243527] calling rtc0+ @ 3378, parent: 00:04 Oct 13 16:57:38 kblu3 kernel: [ 295.243529] call rtc0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243536] calling serio0+ @ 3378, parent: i8042 Oct 13 16:57:38 kblu3 kernel: [ 295.243659] calling 1-3+ @ 172, parent: usb1 Oct 13 16:57:38 kblu3 kernel: [ 295.243668] call 1-3+ returned 0 after 7 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243675] calling 1:0:0:0+ @ 172, parent: target1:0:0 Oct 13 16:57:38 kblu3 kernel: [ 295.243685] sd 1:0:0:0: [sda] Synchronizing SCSI cache Oct 13 16:57:38 kblu3 kernel: [ 295.243804] call 1-7+ returned 0 after 352 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243834] calling host0+ @ 3379, parent: ata1 Oct 13 16:57:38 kblu3 kernel: [ 295.243837] call host0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243900] calling ata1+ @ 3380, parent: 0000:00:17.0 Oct 13 16:57:38 kblu3 kernel: [ 295.243949] call ata1+ returned 0 after 45 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.243984] calling usb2+ @ 3380, parent: 0000:00:14.0 Oct 13 16:57:38 kblu3 kernel: [ 295.244013] calling usb1+ @ 3381, parent: 0000:00:14.0 Oct 13 16:57:38 kblu3 kernel: [ 295.244093] call usb2+ returned 0 after 105 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.244253] call usb1+ returned 0 after 232 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.248602] call serio0+ returned 0 after 4945 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.248605] calling i8042+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.248885] call i8042+ returned 0 after 272 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.248889] calling Fixed MDIO bus.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.248890] call Fixed MDIO bus.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.248955] calling serial8250+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.248957] call serial8250+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.248969] calling input3+ @ 3378, parent: LNXPWRBN:00 Oct 13 16:57:38 kblu3 kernel: [ 295.248971] call input3+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.248973] calling input2+ @ 3378, parent: PNP0C0E:00 Oct 13 16:57:38 kblu3 kernel: [ 295.248975] call input2+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.248977] calling input1+ @ 3378, parent: PNP0C0C:00 Oct 13 16:57:38 kblu3 kernel: [ 295.248978] call input1+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.248980] calling input0+ @ 3378, parent: PNP0C0D:00 Oct 13 16:57:38 kblu3 kernel: [ 295.248981] call input0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249003] calling alarmtimer+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249006] call alarmtimer+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249010] calling efi-framebuffer.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249012] call efi-framebuffer.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249014] calling pcspkr+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249015] call pcspkr+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249059] calling 00:0a+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249061] call 00:0a+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249063] calling 00:09+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249064] call 00:09+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249065] calling 00:08+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249067] call 00:08+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249068] calling 00:07+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249069] call 00:07+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249071] calling 00:06+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249105] call 00:06+ returned 0 after 31 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249107] calling 00:05+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249108] call 00:05+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249110] calling 00:04+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249159] call 00:04+ returned 0 after 46 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249161] calling 00:03+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249162] call 00:03+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249164] calling 00:02+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249165] call 00:02+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249167] calling 00:01+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249168] call 00:01+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249170] calling 00:00+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 295.249171] call 00:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249178] calling LNXPWRBN:00+ @ 3378, parent: LNXSYSTM:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249179] call LNXPWRBN:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249181] calling PNP0C0B:04+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249183] call PNP0C0B:04+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249185] calling PNP0C0B:03+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249186] call PNP0C0B:03+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249188] calling PNP0C0B:02+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249189] call PNP0C0B:02+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249191] calling PNP0C0B:01+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249192] call PNP0C0B:01+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249193] calling PNP0C0B:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249195] call PNP0C0B:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249197] calling INT33A1:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249198] call INT33A1:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249199] calling ACPI000C:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249201] call ACPI000C:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249202] calling PNP0C14:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249203] call PNP0C14:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249205] calling PNP0C0E:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249206] call PNP0C0E:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249208] calling INT33D5:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249209] call INT33D5:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249211] calling PNP0C0C:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249212] call PNP0C0C:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249214] calling ACPI0003:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249215] call ACPI0003:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249217] calling INT344B:00+ @ 3378, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249218] call INT344B:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249221] calling PNP0103:00+ @ 3378, parent: 0000:00:1f.0 Oct 13 16:57:38 kblu3 kernel: [ 295.249222] call PNP0103:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249224] calling INT0800:00+ @ 3378, parent: 0000:00:1f.0 Oct 13 16:57:38 kblu3 kernel: [ 295.249225] call INT0800:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249226] calling PNP0C0D:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249227] call PNP0C0D:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249229] calling INT33D6:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249230] call INT33D6:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249232] calling PNP0C0A:02+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249233] call PNP0C0A:02+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249235] calling PNP0C0A:01+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249236] call PNP0C0A:01+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249237] calling PNP0C0A:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249238] call PNP0C0A:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249240] calling PNP0C09:00+ @ 3378, parent: 0000:00:1f.0 Oct 13 16:57:38 kblu3 kernel: [ 295.249241] call PNP0C09:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249267] calling LNXTHERM:01+ @ 3378, parent: LNXSYBUS:01 Oct 13 16:57:38 kblu3 kernel: [ 295.249270] call LNXTHERM:01+ returned 0 after 2 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249273] calling LNXTHERM:00+ @ 3378, parent: LNXSYBUS:01 Oct 13 16:57:38 kblu3 kernel: [ 295.249274] call LNXTHERM:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249292] calling PNP0C0E:00+ @ 3378, parent: LNXSYBUS:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249293] call PNP0C0E:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249297] calling PNP0C0C:00+ @ 3378, parent: LNXSYBUS:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249299] call PNP0C0C:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249305] calling 0000:01:00.0+ @ 3380, parent: 0000:00:1c.0 Oct 13 16:57:38 kblu3 kernel: [ 295.249308] call 0000:01:00.0+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249315] calling 0000:00:1f.6+ @ 3381, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249317] calling 0000:00:1f.4+ @ 3380, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249318] call 0000:00:1f.4+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249324] calling dock.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249325] call dock.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249327] e1000e: EEE TX LPI TIMER: 00000011 Oct 13 16:57:38 kblu3 kernel: [ 295.249342] calling 0000:00:1f.2+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249343] call 0000:00:1f.2+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249347] calling 0000:00:1f.0+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249348] call 0000:00:1f.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249351] calling 0000:00:1e.6+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249403] call 0000:00:1e.6+ returned 0 after 48 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249407] calling 0000:00:1e.4+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249463] call 0000:00:1e.4+ returned 0 after 52 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249467] calling 0000:00:1e.0+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249469] call 0000:00:1e.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249472] calling 0000:00:1c.0+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249491] call 0000:00:1c.0+ returned 0 after 17 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249574] calling PNP0C0D:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249575] call PNP0C0D:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249639] calling reg-dummy+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.249640] call reg-dummy+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249793] calling 0000:00:16.0+ @ 3382, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249849] calling 0000:00:15.1+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249853] call 0000:00:15.1+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249862] calling 0000:00:15.0+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249864] call 0000:00:15.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249868] calling 0000:00:14.3+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249870] call 0000:00:14.3+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249887] calling 0000:00:14.2+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249889] call 0000:00:14.2+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249894] calling 0000:00:14.0+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249916] calling 0000:00:13.0+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249918] call 0000:00:13.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249927] calling 0000:00:08.0+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249928] call 0000:00:08.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249931] calling 0000:00:05.0+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249932] call 0000:00:05.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.249937] calling 0000:00:02.0+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.249983] [drm:intel_power_well_enable [i915]] enabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 295.250021] [drm:skl_set_power_well [i915]] Enabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 295.250026] call 0000:00:14.0+ returned 0 after 127 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.250033] calling 0000:00:00.0+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.250035] call 0000:00:00.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.250096] [drm:intel_power_well_enable [i915]] enabling DDI B power well Oct 13 16:57:38 kblu3 kernel: [ 295.250125] [drm:skl_set_power_well [i915]] Enabling DDI B power well Oct 13 16:57:38 kblu3 kernel: [ 295.250151] [drm:intel_power_well_enable [i915]] enabling DDI C power well Oct 13 16:57:38 kblu3 kernel: [ 295.250178] [drm:skl_set_power_well [i915]] Enabling DDI C power well Oct 13 16:57:38 kblu3 kernel: [ 295.250204] [drm:intel_power_well_enable [i915]] enabling DDI D power well Oct 13 16:57:38 kblu3 kernel: [ 295.250232] [drm:skl_set_power_well [i915]] Enabling DDI D power well Oct 13 16:57:38 kblu3 kernel: [ 295.250293] sd 1:0:0:0: [sda] Stopping disk Oct 13 16:57:38 kblu3 kernel: [ 295.250323] call 0000:00:16.0+ returned 0 after 515 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.250912] [drm:intel_atomic_check [i915]] [CONNECTOR:37:eDP-1] checking for sink bpp constrains Oct 13 16:57:38 kblu3 kernel: [ 295.250952] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 Oct 13 16:57:38 kblu3 kernel: [ 295.250998] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:38 kblu3 kernel: [ 295.251038] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 241500KHz Oct 13 16:57:38 kblu3 kernel: [ 295.251082] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 4 clock 270000 bpp 24 Oct 13 16:57:38 kblu3 kernel: [ 295.251116] [drm:intel_dp_compute_config [i915]] DP link bw required 579600 available 864000 Oct 13 16:57:38 kblu3 kernel: [ 295.251152] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 Oct 13 16:57:38 kblu3 kernel: [ 295.251192] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][modeset] config ffff880261eb7800 for pipe A Oct 13 16:57:38 kblu3 kernel: [ 295.251247] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP Oct 13 16:57:38 kblu3 kernel: [ 295.251278] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:57:38 kblu3 kernel: [ 295.251309] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:38 kblu3 kernel: [ 295.251338] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m: 5627357, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64 Oct 13 16:57:38 kblu3 kernel: [ 295.251367] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:57:38 kblu3 kernel: [ 295.251395] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:57:38 kblu3 kernel: [ 295.251421] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:57:38 kblu3 kernel: [ 295.251431] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:57:38 kblu3 kernel: [ 295.251457] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:57:38 kblu3 kernel: [ 295.251463] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:57:38 kblu3 kernel: [ 295.251491] [drm:intel_dump_pipe_config [i915]] crtc timings: 241500 2560 2608 2640 2720 1440 1442 1447 1480, type: 0x48 flags: 0xa Oct 13 16:57:38 kblu3 kernel: [ 295.251517] [drm:intel_dump_pipe_config [i915]] port clock: 270000 Oct 13 16:57:38 kblu3 kernel: [ 295.251543] [drm:intel_dump_pipe_config [i915]] pipe src size: 2560x1440 Oct 13 16:57:38 kblu3 kernel: [ 295.251570] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 Oct 13 16:57:38 kblu3 kernel: [ 295.251597] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:57:38 kblu3 kernel: [ 295.251624] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:57:38 kblu3 kernel: [ 295.251650] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:57:38 kblu3 kernel: [ 295.251675] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:57:38 kblu3 kernel: [ 295.251701] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 295.251726] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:57:38 kblu3 kernel: [ 295.251781] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] enabled Oct 13 16:57:38 kblu3 kernel: [ 295.251808] [drm:intel_dump_pipe_config [i915]] FB:58, fb = 2560x1440 format = XR24 little-endian (0x34325258) Oct 13 16:57:38 kblu3 kernel: [ 295.251808] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+2560+1440 dst 0x0+2560+1440 Oct 13 16:57:38 kblu3 kernel: [ 295.251834] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 295.251860] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 295.251898] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 Oct 13 16:57:38 kblu3 kernel: [ 295.251939] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:57:38 kblu3 kernel: [ 295.251978] [drm:intel_find_shared_dpll [i915]] [CRTC:26:pipe A] allocated DPLL 0 Oct 13 16:57:38 kblu3 kernel: [ 295.252012] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A Oct 13 16:57:38 kblu3 kernel: [ 295.252047] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:38 kblu3 kernel: [ 295.252301] [drm:intel_edp_backlight_off [i915]] Oct 13 16:57:38 kblu3 kernel: [ 295.263808] call hdaudioC0D0+ returned 0 after 19904 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.263831] calling 0000:00:1f.3+ @ 3380, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.265069] call 0000:00:1f.3+ returned 0 after 1205 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.290761] call 0000:00:1f.6+ returned 0 after 40472 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.297049] call 1:0:0:0+ returned 0 after 52120 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.297106] calling target1:0:0+ @ 171, parent: host1 Oct 13 16:57:38 kblu3 kernel: [ 295.297108] call target1:0:0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.297160] calling host1+ @ 6, parent: ata2 Oct 13 16:57:38 kblu3 kernel: [ 295.297162] call host1+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.297213] calling ata2+ @ 3379, parent: 0000:00:17.0 Oct 13 16:57:38 kblu3 kernel: [ 295.297513] call ata2+ returned 0 after 290 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.297570] calling 0000:00:17.0+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.297580] call 0000:00:17.0+ returned 0 after 7 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.459422] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 Oct 13 16:57:38 kblu3 kernel: [ 295.459525] [drm:intel_disable_pipe [i915]] disabling pipe A Oct 13 16:57:38 kblu3 kernel: [ 295.470581] [drm:intel_edp_panel_off [i915]] Turn eDP port A panel power off Oct 13 16:57:38 kblu3 kernel: [ 295.470657] [drm:intel_edp_panel_off [i915]] Wait for panel power off time Oct 13 16:57:38 kblu3 kernel: [ 295.470772] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 Oct 13 16:57:38 kblu3 kernel: [ 295.522863] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:38 kblu3 kernel: [ 295.522929] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 26 Oct 13 16:57:38 kblu3 kernel: [ 295.522980] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 Oct 13 16:57:38 kblu3 kernel: [ 295.523051] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] Oct 13 16:57:38 kblu3 kernel: [ 295.523097] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DDI B] Oct 13 16:57:38 kblu3 kernel: [ 295.523141] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DP-MST A] Oct 13 16:57:38 kblu3 kernel: [ 295.523180] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:DP-MST B] Oct 13 16:57:38 kblu3 kernel: [ 295.523249] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:DP-MST C] Oct 13 16:57:38 kblu3 kernel: [ 295.523285] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] Oct 13 16:57:38 kblu3 kernel: [ 295.523323] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] Oct 13 16:57:38 kblu3 kernel: [ 295.523358] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] Oct 13 16:57:38 kblu3 kernel: [ 295.523392] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] Oct 13 16:57:38 kblu3 kernel: [ 295.523435] [drm:verify_connector_state [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:38 kblu3 kernel: [ 295.523478] [drm:verify_connector_state [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:57:38 kblu3 kernel: [ 295.523517] [drm:verify_connector_state [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:38 kblu3 kernel: [ 295.523556] [drm:verify_connector_state [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:38 kblu3 kernel: [ 295.523593] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:38 kblu3 kernel: [ 295.523629] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:57:38 kblu3 kernel: [ 295.523664] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 2 Oct 13 16:57:38 kblu3 kernel: [ 295.523698] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 3 Oct 13 16:57:38 kblu3 kernel: [ 295.523742] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:38 kblu3 kernel: [ 295.523782] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] Oct 13 16:57:38 kblu3 kernel: [ 295.523821] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:38 kblu3 kernel: [ 295.526119] [drm:intel_power_well_disable [i915]] disabling DDI D power well Oct 13 16:57:38 kblu3 kernel: [ 295.526159] [drm:skl_set_power_well [i915]] Disabling DDI D power well Oct 13 16:57:38 kblu3 kernel: [ 295.526195] [drm:intel_power_well_disable [i915]] disabling DDI C power well Oct 13 16:57:38 kblu3 kernel: [ 295.526229] [drm:skl_set_power_well [i915]] Disabling DDI C power well Oct 13 16:57:38 kblu3 kernel: [ 295.526262] [drm:intel_power_well_disable [i915]] disabling DDI B power well Oct 13 16:57:38 kblu3 kernel: [ 295.526295] [drm:skl_set_power_well [i915]] Disabling DDI B power well Oct 13 16:57:38 kblu3 kernel: [ 295.526327] [drm:intel_power_well_disable [i915]] disabling DDI A/E power well Oct 13 16:57:38 kblu3 kernel: [ 295.526358] [drm:skl_set_power_well [i915]] Disabling DDI A/E power well Oct 13 16:57:38 kblu3 kernel: [ 295.526390] [drm:intel_power_well_disable [i915]] disabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 295.526430] [drm:skl_set_power_well [i915]] Disabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 295.526461] [drm:intel_power_well_disable [i915]] disabling DC off Oct 13 16:57:38 kblu3 kernel: [ 295.526495] [drm:skl_enable_dc6 [i915]] Enabling DC6 Oct 13 16:57:38 kblu3 kernel: [ 295.526526] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 Oct 13 16:57:38 kblu3 kernel: [ 295.526957] [drm:intel_power_well_disable [i915]] disabling always-on Oct 13 16:57:38 kblu3 kernel: [ 295.526963] call 0000:00:02.0+ returned 0 after 270531 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.527047] PM: suspend of devices complete after 283.739 msecs Oct 13 16:57:38 kblu3 kernel: [ 295.527488] calling PNP0C0B:04+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.527498] call PNP0C0B:04+ returned 0 after 7 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.527500] calling PNP0C0B:03+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.527503] call PNP0C0B:03+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.527505] calling PNP0C0B:02+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.527507] call PNP0C0B:02+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.527509] calling PNP0C0B:01+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.527512] call PNP0C0B:01+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.527513] calling PNP0C0B:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.527516] call PNP0C0B:00+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.527522] calling INT344B:00+ @ 3378, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.531547] call INT344B:00+ returned 0 after 3929 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.531660] calling 0000:00:02.0+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.531962] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00 Oct 13 16:57:38 kblu3 kernel: [ 295.532024] [drm:skl_set_cdclk [i915]] Changing CDCLK to 24000 kHz (VCO 0 kHz) Oct 13 16:57:38 kblu3 kernel: [ 295.538356] [drm:intel_update_cdclk [i915]] Current CD clock rate: 24000 kHz, VCO: 0 kHz, ref: 24000 kHz Oct 13 16:57:38 kblu3 kernel: [ 295.538387] [drm:intel_power_well_disable [i915]] disabling MISC IO power well Oct 13 16:57:38 kblu3 kernel: [ 295.538420] [drm:skl_set_power_well [i915]] Disabling MISC IO power well Oct 13 16:57:38 kblu3 kernel: [ 295.538450] [drm:skl_set_power_well [i915]] Clearing auxiliary requests for MISC IO power well forced on by DMC Oct 13 16:57:38 kblu3 kernel: [ 295.538479] [drm:intel_power_well_disable [i915]] disabling power well 1 Oct 13 16:57:38 kblu3 kernel: [ 295.538510] [drm:skl_set_power_well [i915]] Clearing auxiliary requests for power well 1 forced on by DMC Oct 13 16:57:38 kblu3 kernel: [ 295.555340] call 0000:00:02.0+ returned 0 after 23119 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.555412] PM: late suspend of devices complete after 28.358 msecs Oct 13 16:57:38 kblu3 kernel: [ 295.555921] calling 0000:01:00.0+ @ 3384, parent: 0000:00:1c.0 Oct 13 16:57:38 kblu3 kernel: [ 295.555924] calling 0000:00:1f.6+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.555934] calling 0000:00:1f.4+ @ 3379, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.556214] calling 0000:00:1f.2+ @ 6, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.558371] call 0000:00:1f.4+ returned 0 after 2377 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.558378] calling 0000:00:1f.0+ @ 3379, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.558657] call 0000:00:1f.2+ returned 0 after 2383 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.558660] calling 0000:00:1e.6+ @ 6, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.559886] e1000e 0000:00:1f.6: System wakeup enabled by ACPI Oct 13 16:57:38 kblu3 kernel: [ 295.560581] call 0000:00:1f.0+ returned 0 after 2149 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.560582] calling 0000:00:1e.4+ @ 3379, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.560737] call 0000:01:00.0+ returned 0 after 4701 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.560738] calling 0000:00:1e.0+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.560786] calling 0000:00:1c.0+ @ 171, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.560798] calling 0000:00:17.0+ @ 172, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561038] call 0000:00:1e.0+ returned 0 after 292 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561039] calling 0000:00:16.0+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561071] calling 0000:00:15.1+ @ 3381, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561075] calling 0000:00:15.0+ @ 3380, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561494] calling 0000:00:1f.3+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561620] call 0000:00:15.1+ returned 0 after 535 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561621] calling 0000:00:14.3+ @ 3381, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561634] call 0000:00:15.0+ returned 0 after 545 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561637] calling 0000:00:14.2+ @ 57, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561642] calling 0000:00:14.0+ @ 3382, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561823] call 0000:00:14.3+ returned 0 after 196 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561824] call 0000:00:14.2+ returned 0 after 181 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561825] calling 0000:00:13.0+ @ 3381, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561826] calling 0000:00:08.0+ @ 57, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561861] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI Oct 13 16:57:38 kblu3 kernel: [ 295.561872] call 0000:00:13.0+ returned 0 after 45 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561874] call 0000:00:08.0+ returned 0 after 46 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561875] calling 0000:00:05.0+ @ 3381, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561876] calling 0000:00:02.0+ @ 57, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561877] call 0000:00:02.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561879] calling 0000:00:00.0+ @ 57, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.561908] call 0000:00:00.0+ returned 0 after 27 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.561909] call 0000:00:05.0+ returned 0 after 33 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.579206] call 0000:00:16.0+ returned 0 after 17739 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.579214] call 0000:00:1f.6+ returned 0 after 22742 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.579708] call 0000:00:17.0+ returned 0 after 18465 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.579711] call 0000:00:1e.4+ returned 0 after 18679 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.580214] call 0000:00:1f.3+ returned 0 after 18279 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.580378] call 0000:00:1e.6+ returned 0 after 21207 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.599230] call 0000:00:14.0+ returned 0 after 36705 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.627220] call 0000:00:1c.0+ returned 0 after 64875 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.627232] PM: noirq suspend of devices complete after 71.816 msecs Oct 13 16:57:38 kblu3 kernel: [ 295.627929] ACPI: Preparing to enter system sleep state S3 Oct 13 16:57:38 kblu3 kernel: [ 295.643561] ACPI : EC: EC stopped Oct 13 16:57:38 kblu3 kernel: [ 295.643562] PM: Saving platform NVS memory Oct 13 16:57:38 kblu3 kernel: [ 295.643568] Disabling non-boot CPUs ... Oct 13 16:57:38 kblu3 kernel: [ 295.643943] Broke affinity for irq 276 Oct 13 16:57:38 kblu3 kernel: [ 295.645029] smpboot: CPU 1 is now offline Oct 13 16:57:38 kblu3 kernel: [ 295.668148] Broke affinity for irq 122 Oct 13 16:57:38 kblu3 kernel: [ 295.668183] Broke affinity for irq 275 Oct 13 16:57:38 kblu3 kernel: [ 295.668187] Broke affinity for irq 276 Oct 13 16:57:38 kblu3 kernel: [ 295.669428] smpboot: CPU 2 is now offline Oct 13 16:57:38 kblu3 kernel: [ 295.692160] Broke affinity for irq 1 Oct 13 16:57:38 kblu3 kernel: [ 295.692168] Broke affinity for irq 8 Oct 13 16:57:38 kblu3 kernel: [ 295.692172] Broke affinity for irq 9 Oct 13 16:57:38 kblu3 kernel: [ 295.692177] Broke affinity for irq 14 Oct 13 16:57:38 kblu3 kernel: [ 295.692190] Broke affinity for irq 122 Oct 13 16:57:38 kblu3 kernel: [ 295.692224] Broke affinity for irq 275 Oct 13 16:57:38 kblu3 kernel: [ 295.692228] Broke affinity for irq 276 Oct 13 16:57:38 kblu3 kernel: [ 295.692233] Broke affinity for irq 277 Oct 13 16:57:38 kblu3 kernel: [ 295.693321] smpboot: CPU 3 is now offline Oct 13 16:57:38 kblu3 kernel: [ 295.715829] PM: Calling kvm_suspend+0x0/0x30 [kvm] Oct 13 16:57:38 kblu3 kernel: [ 295.715836] PM: Calling mce_syscore_suspend+0x0/0x20 Oct 13 16:57:38 kblu3 kernel: [ 295.715843] PM: Calling ledtrig_cpu_syscore_suspend+0x0/0x20 Oct 13 16:57:38 kblu3 kernel: [ 295.715849] PM: Calling timekeeping_suspend+0x0/0x270 Oct 13 16:57:38 kblu3 kernel: [ 295.715958] PM: Calling irq_gc_suspend+0x0/0x60 Oct 13 16:57:38 kblu3 kernel: [ 295.715961] PM: Calling save_ioapic_entries+0x0/0x90 Oct 13 16:57:38 kblu3 kernel: [ 295.717185] PM: Calling i8259A_suspend+0x0/0x30 Oct 13 16:57:38 kblu3 kernel: [ 295.717200] PM: Calling fw_suspend+0x0/0x20 Oct 13 16:57:38 kblu3 kernel: [ 295.717206] PM: Calling acpi_save_bm_rld+0x0/0x1e Oct 13 16:57:38 kblu3 kernel: [ 295.717221] PM: Calling lapic_suspend+0x0/0x1d0 Oct 13 16:57:38 kblu3 kernel: [ 295.719739] ACPI: Low-level resume complete Oct 13 16:57:38 kblu3 kernel: [ 295.719851] ACPI : EC: EC started Oct 13 16:57:38 kblu3 kernel: [ 295.719852] PM: Restoring platform NVS memory Oct 13 16:57:38 kblu3 kernel: [ 295.719861] PM: Calling bsp_resume+0x0/0x20 Oct 13 16:57:38 kblu3 kernel: [ 295.719867] PM: Calling lapic_resume+0x0/0x2a0 Oct 13 16:57:38 kblu3 kernel: [ 295.719903] PM: Calling acpi_restore_bm_rld+0x0/0x36 Oct 13 16:57:38 kblu3 kernel: [ 295.719910] PM: Calling irqrouter_resume+0x0/0x3d Oct 13 16:57:38 kblu3 kernel: [ 295.719914] PM: Calling i8259A_resume+0x0/0x30 Oct 13 16:57:38 kblu3 kernel: [ 295.720107] PM: Calling i8237A_resume+0x0/0xa0 Oct 13 16:57:38 kblu3 kernel: [ 295.720253] PM: Calling ioapic_resume+0x0/0xb0 Oct 13 16:57:38 kblu3 kernel: [ 295.720495] PM: Calling irq_gc_resume+0x0/0x60 Oct 13 16:57:38 kblu3 kernel: [ 295.720497] PM: Calling irq_pm_syscore_resume+0x0/0x20 Oct 13 16:57:38 kblu3 kernel: [ 295.720542] PM: Calling timekeeping_resume+0x0/0x1e0 Oct 13 16:57:38 kblu3 kernel: [ 295.720671] PM: Calling ledtrig_cpu_syscore_resume+0x0/0x20 Oct 13 16:57:38 kblu3 kernel: [ 295.720674] PM: Calling mce_syscore_resume+0x0/0x30 Oct 13 16:57:38 kblu3 kernel: [ 295.720707] PM: Calling mc_bp_resume+0x0/0x50 Oct 13 16:57:38 kblu3 kernel: [ 295.720724] PM: Calling kvm_resume+0x0/0x40 [kvm] Oct 13 16:57:38 kblu3 kernel: [ 295.720742] Enabling non-boot CPUs ... Oct 13 16:57:38 kblu3 kernel: [ 295.744100] x86: Booting SMP configuration: Oct 13 16:57:38 kblu3 kernel: [ 295.744101] smpboot: Booting Node 0 Processor 1 APIC 0x2 Oct 13 16:57:38 kblu3 kernel: [ 295.746917] cache: parent cpu1 should not be sleeping Oct 13 16:57:38 kblu3 kernel: [ 295.747107] CPU1 is up Oct 13 16:57:38 kblu3 kernel: [ 295.768116] smpboot: Booting Node 0 Processor 2 APIC 0x1 Oct 13 16:57:38 kblu3 kernel: [ 295.770980] cache: parent cpu2 should not be sleeping Oct 13 16:57:38 kblu3 kernel: [ 295.771199] CPU2 is up Oct 13 16:57:38 kblu3 kernel: [ 295.824158] smpboot: Booting Node 0 Processor 3 APIC 0x3 Oct 13 16:57:38 kblu3 kernel: [ 295.827035] cache: parent cpu3 should not be sleeping Oct 13 16:57:38 kblu3 kernel: [ 295.827270] CPU3 is up Oct 13 16:57:38 kblu3 kernel: [ 295.832817] ACPI: Waking up from system sleep state S3 Oct 13 16:57:38 kblu3 kernel: [ 295.920170] acpi LNXPOWER:20: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.920774] acpi LNXPOWER:1f: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.920859] acpi LNXPOWER:1e: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.920938] acpi LNXPOWER:1d: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922092] acpi LNXPOWER:1b: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922210] acpi LNXPOWER:19: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922268] acpi LNXPOWER:18: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922325] acpi LNXPOWER:17: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922381] acpi LNXPOWER:16: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922437] acpi LNXPOWER:15: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922494] acpi LNXPOWER:14: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922550] acpi LNXPOWER:13: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922606] acpi LNXPOWER:12: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922663] acpi LNXPOWER:11: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922719] acpi LNXPOWER:10: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922776] acpi LNXPOWER:0f: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922832] acpi LNXPOWER:0e: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.922978] acpi LNXPOWER:0c: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.923034] acpi LNXPOWER:0b: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.923090] acpi LNXPOWER:0a: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.923234] acpi LNXPOWER:08: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.923925] acpi LNXPOWER:07: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.971982] acpi LNXPOWER:06: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.972041] acpi LNXPOWER:05: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.972098] acpi LNXPOWER:04: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.972154] acpi LNXPOWER:03: Turning OFF Oct 13 16:57:38 kblu3 kernel: [ 295.972737] calling 0000:00:00.0+ @ 171, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.972738] calling 0000:00:02.0+ @ 3382, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.972747] calling 0000:00:05.0+ @ 6, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.972779] call 0000:00:00.0+ returned 0 after 39 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.972780] calling 0000:00:08.0+ @ 171, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.972794] call 0000:00:05.0+ returned 0 after 45 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.972796] calling 0000:00:13.0+ @ 6, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.972827] call 0000:00:08.0+ returned 0 after 44 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.972828] calling 0000:00:14.0+ @ 171, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.972843] call 0000:00:13.0+ returned 0 after 45 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.972844] calling 0000:00:14.2+ @ 6, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.972878] call 0000:00:14.2+ returned 0 after 32 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.972880] calling 0000:00:14.3+ @ 6, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973040] call 0000:00:14.3+ returned 0 after 155 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.973041] calling 0000:00:15.0+ @ 6, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973051] calling 0000:00:15.1+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973057] calling 0000:00:16.0+ @ 3379, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973064] calling 0000:00:17.0+ @ 172, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973073] calling 0000:00:1c.0+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973079] calling 0000:00:1e.0+ @ 3384, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973086] calling 0000:00:1e.4+ @ 3381, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973091] calling 0000:00:1e.6+ @ 3387, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973095] calling 0000:00:1f.0+ @ 3380, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973136] call 0000:00:1f.0+ returned 0 after 38 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.973139] calling 0000:00:1f.2+ @ 3380, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973164] call 0000:00:1f.2+ returned 0 after 23 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.973165] calling 0000:00:1f.3+ @ 3380, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973212] calling 0000:00:1f.4+ @ 3386, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973237] calling i8042+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 295.973238] call i8042+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.973285] call 0000:00:1f.4+ returned 0 after 69 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.973287] calling 0000:00:1f.6+ @ 3386, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 295.973680] call 0000:00:17.0+ returned 0 after 600 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.973773] call 0000:00:15.0+ returned 0 after 712 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.973941] call 0000:00:1f.3+ returned 0 after 756 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.974113] call 0000:00:15.1+ returned 0 after 1035 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.974367] call 0000:00:1e.0+ returned 0 after 1256 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.984169] call 0000:00:1e.6+ returned 0 after 10817 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.984319] call 0000:00:1e.4+ returned 0 after 10968 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.992016] call 0000:00:16.0+ returned 0 after 18513 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.992019] call 0000:00:1f.6+ returned 0 after 18291 usecs Oct 13 16:57:38 kblu3 kernel: [ 295.992033] call 0000:00:02.0+ returned 0 after 18841 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.011983] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI Oct 13 16:57:38 kblu3 kernel: [ 296.011989] call 0000:00:14.0+ returned 0 after 38242 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.140034] call 0000:00:1c.0+ returned 0 after 163046 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.140039] calling 0000:01:00.0+ @ 3388, parent: 0000:00:1c.0 Oct 13 16:57:38 kblu3 kernel: [ 296.140043] pci_raw_set_power_state: 36 callbacks suppressed Oct 13 16:57:38 kblu3 kernel: [ 296.140045] pci 0000:01:00.0: Refused to change power state, currently in D3 Oct 13 16:57:38 kblu3 kernel: [ 296.158683] call 0000:01:00.0+ returned 0 after 18206 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.158690] PM: noirq resume of devices complete after 185.999 msecs Oct 13 16:57:38 kblu3 kernel: [ 296.158766] calling 0000:00:02.0+ @ 3388, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.158931] calling INT344B:00+ @ 3378, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.159139] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 Oct 13 16:57:38 kblu3 kernel: [ 296.159201] [drm:intel_power_well_enable [i915]] enabling power well 1 Oct 13 16:57:38 kblu3 kernel: [ 296.159246] [drm:intel_power_well_enable [i915]] enabling MISC IO power well Oct 13 16:57:38 kblu3 kernel: [ 296.159293] [drm:skl_init_cdclk [i915]] Sanitizing cdclk programmed by pre-os Oct 13 16:57:38 kblu3 kernel: [ 296.159315] [drm:skl_set_cdclk [i915]] Changing CDCLK to 337500 kHz (VCO 8100000 kHz) Oct 13 16:57:38 kblu3 kernel: [ 296.162894] call INT344B:00+ returned 0 after 3868 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.162897] calling PNP0C0B:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.164937] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz Oct 13 16:57:38 kblu3 kernel: [ 296.165542] [drm:intel_power_well_enable [i915]] enabling always-on Oct 13 16:57:38 kblu3 kernel: [ 296.165555] [drm:intel_power_well_enable [i915]] enabling DC off Oct 13 16:57:38 kblu3 kernel: [ 296.165569] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 Oct 13 16:57:38 kblu3 kernel: [ 296.165585] [drm:intel_power_well_enable [i915]] enabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 296.165598] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well Oct 13 16:57:38 kblu3 kernel: [ 296.165611] [drm:skl_set_power_well [i915]] Enabling DDI A/E power well Oct 13 16:57:38 kblu3 kernel: [ 296.165624] [drm:intel_power_well_enable [i915]] enabling DDI B power well Oct 13 16:57:38 kblu3 kernel: [ 296.165636] [drm:skl_set_power_well [i915]] Enabling DDI B power well Oct 13 16:57:38 kblu3 kernel: [ 296.165648] [drm:intel_power_well_enable [i915]] enabling DDI C power well Oct 13 16:57:38 kblu3 kernel: [ 296.165661] [drm:skl_set_power_well [i915]] Enabling DDI C power well Oct 13 16:57:38 kblu3 kernel: [ 296.165673] [drm:intel_power_well_enable [i915]] enabling DDI D power well Oct 13 16:57:38 kblu3 kernel: [ 296.165686] [drm:skl_set_power_well [i915]] Enabling DDI D power well Oct 13 16:57:38 kblu3 kernel: [ 296.165698] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 Oct 13 16:57:38 kblu3 kernel: [ 296.165711] call 0000:00:02.0+ returned 0 after 6781 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.172712] call PNP0C0B:00+ returned 0 after 9583 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.172714] calling PNP0C0B:01+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.184577] call PNP0C0B:01+ returned 0 after 11583 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.184578] calling PNP0C0B:02+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.208875] call PNP0C0B:02+ returned 0 after 23727 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.208877] calling PNP0C0B:03+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.242075] call PNP0C0B:03+ returned 0 after 32419 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.242076] calling PNP0C0B:04+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.276840] call PNP0C0B:04+ returned 0 after 33948 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.276897] PM: early resume of devices complete after 118.150 msecs Oct 13 16:57:38 kblu3 kernel: [ 296.276912] calling 0000:00:00.0+ @ 3388, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276913] call 0000:00:00.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.276914] calling 0000:00:02.0+ @ 3388, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276919] calling 0000:00:08.0+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276921] call 0000:00:08.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.276923] calling 0000:00:13.0+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276923] call 0000:00:13.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.276924] calling 0000:00:14.0+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276945] calling 0000:00:14.2+ @ 3406, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276946] call 0000:00:14.2+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.276947] calling 0000:00:14.3+ @ 3406, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276947] call 0000:00:14.3+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.276948] calling 0000:00:15.0+ @ 3406, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276949] call 0000:00:15.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.276950] calling 0000:00:15.1+ @ 3406, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.276950] call 0000:00:15.1+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.276951] calling 0000:00:16.0+ @ 3406, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.277006] calling 0000:00:17.0+ @ 3405, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.277041] call 0000:00:17.0+ returned 0 after 33 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.277042] calling 0000:00:1c.0+ @ 3405, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.277049] call 0000:00:1c.0+ returned 0 after 6 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.277050] calling 0000:00:1e.0+ @ 3405, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.277050] call 0000:00:1e.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.277051] calling 0000:00:1e.4+ @ 3405, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.277154] call 0000:00:14.0+ returned 0 after 224 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.277155] calling 0000:00:1e.6+ @ 3385, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.277314] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8d28c018 Oct 13 16:57:38 kblu3 kernel: [ 296.277332] [drm:intel_opregion_setup [i915]] Public ACPI methods supported Oct 13 16:57:38 kblu3 kernel: [ 296.277343] [drm:intel_opregion_setup [i915]] SWSCI supported Oct 13 16:57:38 kblu3 kernel: [ 296.278083] calling reg-dummy+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.278084] call reg-dummy+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278084] call 0000:00:1e.4+ returned 0 after 1008 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278086] calling 0000:00:1f.0+ @ 3405, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278087] call 0000:00:1f.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278088] calling 0000:00:1f.2+ @ 3405, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278089] call 0000:00:1f.2+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278090] calling 0000:00:1f.3+ @ 3405, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278093] calling PNP0C0A:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278106] calling 0000:00:1f.6+ @ 3383, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278113] calling 0000:00:1f.4+ @ 3409, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278115] call 0000:00:1f.4+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278118] calling 0000:01:00.0+ @ 3409, parent: 0000:00:1c.0 Oct 13 16:57:38 kblu3 kernel: [ 296.278119] call 0000:01:00.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278121] calling usb1+ @ 3409, parent: 0000:00:14.0 Oct 13 16:57:38 kblu3 kernel: [ 296.278171] calling usb2+ @ 3390, parent: 0000:00:14.0 Oct 13 16:57:38 kblu3 kernel: [ 296.278194] call 0000:00:1e.6+ returned 0 after 1013 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278196] calling ata1+ @ 3382, parent: 0000:00:17.0 Oct 13 16:57:38 kblu3 kernel: [ 296.278196] calling ata2+ @ 3385, parent: 0000:00:17.0 Oct 13 16:57:38 kblu3 kernel: [ 296.278200] call ata1+ returned 0 after 3 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278201] calling host0+ @ 3382, parent: ata1 Oct 13 16:57:38 kblu3 kernel: [ 296.278202] call ata2+ returned 0 after 4 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278203] call host0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278204] calling host1+ @ 3385, parent: ata2 Oct 13 16:57:38 kblu3 kernel: [ 296.278205] call host1+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278206] calling target1:0:0+ @ 3382, parent: host1 Oct 13 16:57:38 kblu3 kernel: [ 296.278207] call target1:0:0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278211] calling 0000:00:05.0+ @ 3410, parent: pci0000:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278212] call 0000:00:05.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278216] calling 1:0:0:0+ @ 3385, parent: target1:0:0 Oct 13 16:57:38 kblu3 kernel: [ 296.278217] call 1:0:0:0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278223] call PNP0C0A:00+ returned 0 after 126 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278224] sd 1:0:0:0: [sda] Starting disk Oct 13 16:57:38 kblu3 kernel: [ 296.278225] calling PNP0C0A:01+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278226] e1000e 0000:00:1f.6: System wakeup disabled by ACPI Oct 13 16:57:38 kblu3 kernel: [ 296.278228] call usb2+ returned 0 after 55 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278615] call PNP0C0A:01+ returned 0 after 380 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278616] calling PNP0C0A:02+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278762] call PNP0C0A:02+ returned 0 after 142 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278763] calling PNP0C0D:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.278896] call PNP0C0D:00+ returned 0 after 129 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278938] calling dock.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.278939] call dock.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.278942] calling ACPI0003:00+ @ 3378, parent: LNXSYBUS:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279032] call ACPI0003:00+ returned 0 after 87 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279033] calling PNP0C0C:00+ @ 3378, parent: LNXSYBUS:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279033] call PNP0C0C:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279034] calling PNP0C0E:00+ @ 3378, parent: LNXSYBUS:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279035] call PNP0C0E:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279038] calling LNXTHERM:00+ @ 3378, parent: LNXSYBUS:01 Oct 13 16:57:38 kblu3 kernel: [ 296.279097] call LNXTHERM:00+ returned 0 after 56 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279099] calling LNXTHERM:01+ @ 3378, parent: LNXSYBUS:01 Oct 13 16:57:38 kblu3 kernel: [ 296.279100] call LNXTHERM:01+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279104] calling PNP0C09:00+ @ 3378, parent: 0000:00:1f.0 Oct 13 16:57:38 kblu3 kernel: [ 296.279104] call PNP0C09:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279104] calling PNP0C0A:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279105] call PNP0C0A:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279105] calling PNP0C0A:01+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279106] call PNP0C0A:01+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279106] calling PNP0C0A:02+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279106] call PNP0C0A:02+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279107] calling INT33D6:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279107] call INT33D6:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279108] calling PNP0C0D:00+ @ 3378, parent: PNP0C09:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279108] call PNP0C0D:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279109] calling INT0800:00+ @ 3378, parent: 0000:00:1f.0 Oct 13 16:57:38 kblu3 kernel: [ 296.279109] call INT0800:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279109] calling PNP0103:00+ @ 3378, parent: 0000:00:1f.0 Oct 13 16:57:38 kblu3 kernel: [ 296.279110] call PNP0103:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279111] calling ACPI0003:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279111] call ACPI0003:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279112] calling PNP0C0C:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279112] call PNP0C0C:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279113] calling INT33D5:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279113] call INT33D5:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279114] calling PNP0C0E:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279114] call PNP0C0E:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279114] calling PNP0C14:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279115] call PNP0C14:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279115] calling ACPI000C:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279116] call ACPI000C:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279116] calling INT33A1:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279116] call INT33A1:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279117] calling PNP0C0B:00+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279128] call PNP0C0B:00+ returned 0 after 10 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279129] calling PNP0C0B:01+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279140] call PNP0C0B:01+ returned 0 after 10 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279140] calling PNP0C0B:02+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279151] call PNP0C0B:02+ returned 0 after 10 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279151] calling PNP0C0B:03+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279162] call PNP0C0B:03+ returned 0 after 10 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279163] calling PNP0C0B:04+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279173] call PNP0C0B:04+ returned 0 after 9 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279174] calling LNXPWRBN:00+ @ 3378, parent: LNXSYSTM:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279174] call LNXPWRBN:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279176] calling 00:00+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279176] call 00:00+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279177] calling 00:01+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279177] call 00:01+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279178] calling 00:02+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279178] call 00:02+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279179] calling 00:03+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279179] call 00:03+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279180] calling 00:04+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279181] rtc_cmos 00:04: System wakeup disabled by ACPI Oct 13 16:57:38 kblu3 kernel: [ 296.279251] call 00:04+ returned 0 after 68 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279382] calling 00:05+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279383] call 00:05+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279383] calling 00:06+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279420] serial 00:06: activated Oct 13 16:57:38 kblu3 kernel: [ 296.279421] call 00:06+ returned 0 after 36 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279422] calling 00:07+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279422] call 00:07+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279423] calling 00:08+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279423] call 00:08+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279424] calling 00:09+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279424] call 00:09+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279425] calling 00:0a+ @ 3378, parent: pnp0 Oct 13 16:57:38 kblu3 kernel: [ 296.279425] call 00:0a+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279435] calling pcspkr+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279436] call pcspkr+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279437] calling efi-framebuffer.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279437] call efi-framebuffer.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279438] calling alarmtimer+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279439] call alarmtimer+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279442] calling input0+ @ 3378, parent: PNP0C0D:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279443] call input0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279443] calling input1+ @ 3378, parent: PNP0C0C:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279444] call input1+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279444] calling input2+ @ 3378, parent: PNP0C0E:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279445] call input2+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279445] calling input3+ @ 3378, parent: LNXPWRBN:00 Oct 13 16:57:38 kblu3 kernel: [ 296.279446] call input3+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279448] calling serial8250+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279449] call serial8250+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279461] calling Fixed MDIO bus.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279461] call Fixed MDIO bus.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279462] calling i8042+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279668] call i8042+ returned 0 after 200 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279669] calling serio0+ @ 3378, parent: i8042 Oct 13 16:57:38 kblu3 kernel: [ 296.279671] call serio0+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279687] calling rtc0+ @ 3378, parent: 00:04 Oct 13 16:57:38 kblu3 kernel: [ 296.279688] call rtc0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279689] calling microcode+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 296.279690] call microcode+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279691] calling input4+ @ 3378, parent: serio0 Oct 13 16:57:38 kblu3 kernel: [ 296.279693] call input4+ returned 0 after 1 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279695] calling input4::numlock+ @ 3378, parent: input4 Oct 13 16:57:38 kblu3 kernel: [ 296.279695] call input4::numlock+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279696] calling input4::capslock+ @ 3378, parent: input4 Oct 13 16:57:38 kblu3 kernel: [ 296.279697] call input4::capslock+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279697] calling input4::scrolllock+ @ 3378, parent: input4 Oct 13 16:57:38 kblu3 kernel: [ 296.279698] call input4::scrolllock+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279701] calling mmc0::+ @ 3378, parent: 0000:00:1e.4 Oct 13 16:57:38 kblu3 kernel: [ 296.279702] call mmc0::+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.279702] calling mmc1::+ @ 3378, parent: 0000:00:1e.6 Oct 13 16:57:38 kblu3 kernel: [ 296.279703] call mmc1::+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.282972] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 Oct 13 16:57:38 kblu3 kernel: [ 296.282986] [drm:intel_opregion_setup [i915]] ASLE supported Oct 13 16:57:38 kblu3 kernel: [ 296.282998] [drm:intel_opregion_setup [i915]] ASLE extension supported Oct 13 16:57:38 kblu3 kernel: [ 296.283011] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) Oct 13 16:57:38 kblu3 kernel: [ 296.283072] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 Oct 13 16:57:38 kblu3 kernel: [ 296.283556] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring Oct 13 16:57:38 kblu3 kernel: [ 296.283625] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring Oct 13 16:57:38 kblu3 kernel: [ 296.283677] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring Oct 13 16:57:38 kblu3 kernel: [ 296.283728] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd2 ring Oct 13 16:57:38 kblu3 kernel: [ 296.283777] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring Oct 13 16:57:38 kblu3 kernel: [ 296.283832] [drm:intel_guc_setup [i915]] GuC fw status: path i915/kbl_guc_ver9_14.bin, fetch NONE, load NONE Oct 13 16:57:38 kblu3 kernel: [ 296.283839] [drm] GuC firmware load skipped Oct 13 16:57:38 kblu3 kernel: [ 296.283855] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz Oct 13 16:57:38 kblu3 kernel: [ 296.283935] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:26:pipe A] hw state readout: disabled Oct 13 16:57:38 kblu3 kernel: [ 296.283949] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:30:pipe B] hw state readout: disabled Oct 13 16:57:38 kblu3 kernel: [ 296.283962] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:34:pipe C] hw state readout: disabled Oct 13 16:57:38 kblu3 kernel: [ 296.283974] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1 Oct 13 16:57:38 kblu3 kernel: [ 296.283986] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0 Oct 13 16:57:38 kblu3 kernel: [ 296.283997] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284007] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284019] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:36:DDI A] hw state readout: disabled, pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.284029] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:45:DDI B] hw state readout: disabled, pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.284040] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:47:DP-MST A] hw state readout: disabled, pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.284050] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:48:DP-MST B] hw state readout: disabled, pipe B Oct 13 16:57:38 kblu3 kernel: [ 296.284060] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:49:DP-MST C] hw state readout: disabled, pipe C Oct 13 16:57:38 kblu3 kernel: [ 296.284070] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:52:DDI C] hw state readout: disabled, pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.284080] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:DP-MST A] hw state readout: disabled, pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.284089] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:DP-MST B] hw state readout: disabled, pipe B Oct 13 16:57:38 kblu3 kernel: [ 296.284099] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:56:DP-MST C] hw state readout: disabled, pipe C Oct 13 16:57:38 kblu3 kernel: [ 296.284109] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:37:eDP-1] hw state readout: disabled Oct 13 16:57:38 kblu3 kernel: [ 296.284120] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:46:DP-1] hw state readout: disabled Oct 13 16:57:38 kblu3 kernel: [ 296.284130] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:50:HDMI-A-1] hw state readout: disabled Oct 13 16:57:38 kblu3 kernel: [ 296.284141] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:53:DP-2] hw state readout: disabled Oct 13 16:57:38 kblu3 kernel: [ 296.284151] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:57:HDMI-A-2] hw state readout: disabled Oct 13 16:57:38 kblu3 kernel: [ 296.284165] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][setup_hw_state] config ffff880261eb7800 for pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.284176] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A Oct 13 16:57:38 kblu3 kernel: [ 296.284187] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284198] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284209] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284219] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284229] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284238] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:57:38 kblu3 kernel: [ 296.284242] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284251] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:57:38 kblu3 kernel: [ 296.284253] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284264] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284273] [drm:intel_dump_pipe_config [i915]] port clock: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284283] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284292] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284302] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:57:38 kblu3 kernel: [ 296.284311] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:57:38 kblu3 kernel: [ 296.284321] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284330] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284340] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284349] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:57:38 kblu3 kernel: [ 296.284369] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] enabled Oct 13 16:57:38 kblu3 kernel: [ 296.284379] [drm:intel_dump_pipe_config [i915]] FB:58, fb = 2560x1440 format = XR24 little-endian (0x34325258) Oct 13 16:57:38 kblu3 kernel: [ 296.284379] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+2560+1440 dst 0x0+2560+1440 Oct 13 16:57:38 kblu3 kernel: [ 296.284389] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.284398] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.284409] [drm:intel_dump_pipe_config [i915]] [CRTC:30:pipe B][setup_hw_state] config ffff880261eb5000 for pipe B Oct 13 16:57:38 kblu3 kernel: [ 296.284418] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B Oct 13 16:57:38 kblu3 kernel: [ 296.284427] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284436] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284446] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284455] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284464] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284473] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:57:38 kblu3 kernel: [ 296.284475] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284484] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:57:38 kblu3 kernel: [ 296.284486] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284495] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284504] [drm:intel_dump_pipe_config [i915]] port clock: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284513] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284523] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284532] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:57:38 kblu3 kernel: [ 296.284541] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:57:38 kblu3 kernel: [ 296.284550] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284559] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284568] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284577] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:57:38 kblu3 kernel: [ 296.284586] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1B] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.284596] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor B] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.284605] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2B] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.284615] [drm:intel_dump_pipe_config [i915]] [CRTC:34:pipe C][setup_hw_state] config ffff88025c487800 for pipe C Oct 13 16:57:38 kblu3 kernel: [ 296.284624] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C Oct 13 16:57:38 kblu3 kernel: [ 296.284633] [drm:intel_dump_pipe_config [i915]] pipe bpp: 0, dithering: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284642] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284651] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284661] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284670] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284678] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:57:38 kblu3 kernel: [ 296.284680] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284689] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:57:38 kblu3 kernel: [ 296.284691] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284700] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284709] [drm:intel_dump_pipe_config [i915]] port clock: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284718] [drm:intel_dump_pipe_config [i915]] pipe src size: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284728] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284737] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:57:38 kblu3 kernel: [ 296.284746] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:57:38 kblu3 kernel: [ 296.284755] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284764] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.284773] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.284782] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:57:38 kblu3 kernel: [ 296.284791] [drm:intel_dump_pipe_config [i915]] [PLANE:32:plane 1C] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.284800] [drm:intel_dump_pipe_config [i915]] [PLANE:33:cursor C] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.284809] [drm:intel_dump_pipe_config [i915]] [PLANE:35:plane 2C] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.284837] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling Oct 13 16:57:38 kblu3 kernel: [ 296.284875] [drm:intel_power_well_disable [i915]] disabling DDI D power well Oct 13 16:57:38 kblu3 kernel: [ 296.284886] [drm:skl_set_power_well [i915]] Disabling DDI D power well Oct 13 16:57:38 kblu3 kernel: [ 296.284896] [drm:intel_power_well_disable [i915]] disabling DDI C power well Oct 13 16:57:38 kblu3 kernel: [ 296.284907] [drm:skl_set_power_well [i915]] Disabling DDI C power well Oct 13 16:57:38 kblu3 kernel: [ 296.284917] [drm:intel_power_well_disable [i915]] disabling DDI B power well Oct 13 16:57:38 kblu3 kernel: [ 296.284927] [drm:skl_set_power_well [i915]] Disabling DDI B power well Oct 13 16:57:38 kblu3 kernel: [ 296.284937] [drm:intel_power_well_disable [i915]] disabling DDI A/E power well Oct 13 16:57:38 kblu3 kernel: [ 296.284960] [drm:skl_set_power_well [i915]] Disabling DDI A/E power well Oct 13 16:57:38 kblu3 kernel: [ 296.284980] [drm:intel_atomic_check [i915]] [CONNECTOR:37:eDP-1] checking for sink bpp constrains Oct 13 16:57:38 kblu3 kernel: [ 296.284991] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 Oct 13 16:57:38 kblu3 kernel: [ 296.285006] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:38 kblu3 kernel: [ 296.285019] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 241500KHz Oct 13 16:57:38 kblu3 kernel: [ 296.285034] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 4 clock 270000 bpp 24 Oct 13 16:57:38 kblu3 kernel: [ 296.285046] [drm:intel_dp_compute_config [i915]] DP link bw required 579600 available 864000 Oct 13 16:57:38 kblu3 kernel: [ 296.285058] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285070] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][modeset] config ffff880261eb3000 for pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.285095] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP Oct 13 16:57:38 kblu3 kernel: [ 296.285105] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285115] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285125] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m: 5627357, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64 Oct 13 16:57:38 kblu3 kernel: [ 296.285135] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285145] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285154] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:57:38 kblu3 kernel: [ 296.285156] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:57:38 kblu3 kernel: [ 296.285165] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:57:38 kblu3 kernel: [ 296.285167] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:57:38 kblu3 kernel: [ 296.285177] [drm:intel_dump_pipe_config [i915]] crtc timings: 241500 2560 2608 2640 2720 1440 1442 1447 1480, type: 0x48 flags: 0xa Oct 13 16:57:38 kblu3 kernel: [ 296.285186] [drm:intel_dump_pipe_config [i915]] port clock: 270000 Oct 13 16:57:38 kblu3 kernel: [ 296.285196] [drm:intel_dump_pipe_config [i915]] pipe src size: 2560x1440 Oct 13 16:57:38 kblu3 kernel: [ 296.285205] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 Oct 13 16:57:38 kblu3 kernel: [ 296.285215] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:57:38 kblu3 kernel: [ 296.285224] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:57:38 kblu3 kernel: [ 296.285233] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285242] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285251] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.285260] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:57:38 kblu3 kernel: [ 296.285280] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] enabled Oct 13 16:57:38 kblu3 kernel: [ 296.285289] [drm:intel_dump_pipe_config [i915]] FB:58, fb = 2560x1440 format = XR24 little-endian (0x34325258) Oct 13 16:57:38 kblu3 kernel: [ 296.285289] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+2560+1440 dst 0x0+2560+1440 Oct 13 16:57:38 kblu3 kernel: [ 296.285299] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.285308] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 Oct 13 16:57:38 kblu3 kernel: [ 296.285321] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 Oct 13 16:57:38 kblu3 kernel: [ 296.285336] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:57:38 kblu3 kernel: [ 296.285350] [drm:intel_find_shared_dpll [i915]] [CRTC:26:pipe A] allocated DPLL 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285362] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.285374] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:38 kblu3 kernel: [ 296.285385] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:30:pipe B] scaler_user index 1.31 Oct 13 16:57:38 kblu3 kernel: [ 296.285396] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:34:pipe C] scaler_user index 2.31 Oct 13 16:57:38 kblu3 kernel: [ 296.285406] [drm:skl_update_scaler [i915]] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0 Oct 13 16:57:38 kblu3 kernel: [ 296.285425] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well Oct 13 16:57:38 kblu3 kernel: [ 296.285435] [drm:skl_set_power_well [i915]] Enabling DDI A/E power well Oct 13 16:57:38 kblu3 kernel: [ 296.285448] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] Oct 13 16:57:38 kblu3 kernel: [ 296.285458] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DDI B] Oct 13 16:57:38 kblu3 kernel: [ 296.285468] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DP-MST A] Oct 13 16:57:38 kblu3 kernel: [ 296.285478] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:DP-MST B] Oct 13 16:57:38 kblu3 kernel: [ 296.285488] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:DP-MST C] Oct 13 16:57:38 kblu3 kernel: [ 296.285497] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] Oct 13 16:57:38 kblu3 kernel: [ 296.285507] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] Oct 13 16:57:38 kblu3 kernel: [ 296.285517] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] Oct 13 16:57:38 kblu3 kernel: [ 296.285526] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] Oct 13 16:57:38 kblu3 kernel: [ 296.285537] [drm:verify_connector_state [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:38 kblu3 kernel: [ 296.285547] [drm:verify_connector_state [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:57:38 kblu3 kernel: [ 296.285557] [drm:verify_connector_state [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:38 kblu3 kernel: [ 296.285567] [drm:verify_connector_state [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:38 kblu3 kernel: [ 296.285577] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285587] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:57:38 kblu3 kernel: [ 296.285597] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 2 Oct 13 16:57:38 kblu3 kernel: [ 296.285607] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 3 Oct 13 16:57:38 kblu3 kernel: [ 296.285621] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 26 Oct 13 16:57:38 kblu3 kernel: [ 296.285632] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 Oct 13 16:57:38 kblu3 kernel: [ 296.285655] [drm:edp_panel_on [i915]] Turn eDP port A panel power on Oct 13 16:57:38 kblu3 kernel: [ 296.285673] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle Oct 13 16:57:38 kblu3 kernel: [ 296.285738] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 Oct 13 16:57:38 kblu3 kernel: [ 296.285756] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:38 kblu3 kernel: [ 296.285789] [drm:edp_panel_on [i915]] Wait for panel power on Oct 13 16:57:38 kblu3 kernel: [ 296.285855] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 Oct 13 16:57:38 kblu3 kernel: [ 296.291272] [drm:intel_power_well_disable [i915]] disabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 296.291288] [drm:skl_set_power_well [i915]] Disabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 296.291290] call 0000:00:1f.3+ returned 0 after 12890 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.291296] calling hdaudioC0D0+ @ 3385, parent: 0000:00:1f.3 Oct 13 16:57:38 kblu3 kernel: [ 296.291330] calling hdaudioC0D2+ @ 3379, parent: 0000:00:1f.3 Oct 13 16:57:38 kblu3 kernel: [ 296.291346] [drm:intel_power_well_enable [i915]] enabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 296.291358] [drm:skl_set_power_well [i915]] Enabling power well 2 Oct 13 16:57:38 kblu3 kernel: [ 296.292754] call hdaudioC0D0+ returned 0 after 1422 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.293566] call 0000:00:16.0+ returned 0 after 16225 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.296074] [drm:i915_audio_component_get_eld [i915]] Not valid for port B Oct 13 16:57:38 kblu3 kernel: [ 296.296090] [drm:i915_audio_component_get_eld [i915]] Not valid for port C Oct 13 16:57:38 kblu3 kernel: [ 296.296105] [drm:i915_audio_component_get_eld [i915]] Not valid for port D Oct 13 16:57:38 kblu3 kernel: [ 296.296356] call hdaudioC0D2+ returned 0 after 4907 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.322141] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout Oct 13 16:57:38 kblu3 kernel: [ 296.376307] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 Oct 13 16:57:38 kblu3 kernel: [ 296.376323] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long Oct 13 16:57:38 kblu3 kernel: [ 296.376338] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 Oct 13 16:57:38 kblu3 kernel: [ 296.376359] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A Oct 13 16:57:38 kblu3 kernel: [ 296.439951] call usb1+ returned 0 after 158033 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.439987] calling 1-7+ @ 171, parent: usb1 Oct 13 16:57:38 kblu3 kernel: [ 296.439988] calling 1-3+ @ 3382, parent: usb1 Oct 13 16:57:38 kblu3 kernel: [ 296.440182] call 1-7+ returned 0 after 188 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.486145] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:38 kblu3 kernel: [ 296.486193] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on Oct 13 16:57:38 kblu3 kernel: [ 296.486262] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b Oct 13 16:57:38 kblu3 kernel: [ 296.487656] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 Oct 13 16:57:38 kblu3 kernel: [ 296.487678] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 Oct 13 16:57:38 kblu3 kernel: [ 296.487698] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 Oct 13 16:57:38 kblu3 kernel: [ 296.487718] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 Oct 13 16:57:38 kblu3 kernel: [ 296.492254] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 01000000 Oct 13 16:57:38 kblu3 kernel: [ 296.492273] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 Oct 13 16:57:38 kblu3 kernel: [ 296.492292] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1 Oct 13 16:57:38 kblu3 kernel: [ 296.496815] [drm:intel_dp_start_link_train [i915]] clock recovery OK Oct 13 16:57:38 kblu3 kernel: [ 296.496835] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 Oct 13 16:57:38 kblu3 kernel: [ 296.501370] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful Oct 13 16:57:38 kblu3 kernel: [ 296.501556] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff880261eb3000 Oct 13 16:57:38 kblu3 kernel: [ 296.501947] [drm:intel_enable_pipe [i915]] enabling pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.502002] [drm:intel_edp_backlight_on.part.27 [i915]] Oct 13 16:57:38 kblu3 kernel: [ 296.502023] [drm:intel_panel_enable_backlight [i915]] pipe A Oct 13 16:57:38 kblu3 kernel: [ 296.502097] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 937 Oct 13 16:57:38 kblu3 kernel: [ 296.502319] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS Oct 13 16:57:38 kblu3 kernel: [ 296.518724] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:38 kblu3 kernel: [ 296.518744] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] Oct 13 16:57:38 kblu3 kernel: [ 296.518773] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:38 kblu3 kernel: [ 296.518790] [drm:intel_atomic_commit_tail [i915]] [CRTC:30:pipe B] Oct 13 16:57:38 kblu3 kernel: [ 296.518806] [drm:intel_atomic_commit_tail [i915]] [CRTC:34:pipe C] Oct 13 16:57:38 kblu3 kernel: [ 296.518887] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:38 kblu3 kernel: [ 296.518902] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no Oct 13 16:57:38 kblu3 kernel: [ 296.518917] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 Oct 13 16:57:38 kblu3 kernel: [ 296.518930] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 Oct 13 16:57:38 kblu3 kernel: [ 296.518943] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 Oct 13 16:57:38 kblu3 kernel: [ 296.519299] [drm:drm_helper_hpd_irq_event] [CONNECTOR:37:eDP-1] status updated from connected to connected Oct 13 16:57:38 kblu3 kernel: [ 296.519312] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:38 kblu3 kernel: [ 296.527679] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.536040] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.544403] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.552763] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.560037] usb 1-3: reset full-speed USB device number 2 using xhci_hcd Oct 13 16:57:38 kblu3 kernel: [ 296.561129] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.569491] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.577852] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.586214] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.590290] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Oct 13 16:57:38 kblu3 kernel: [ 296.590304] ata1: SATA link down (SStatus 4 SControl 300) Oct 13 16:57:38 kblu3 kernel: [ 296.594576] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.602937] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.611299] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.619660] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.628021] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.631207] ata2.00: configured for UDMA/133 Oct 13 16:57:38 kblu3 kernel: [ 296.636384] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.644746] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.653115] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.661477] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.669838] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.678198] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.686567] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.694929] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.700732] call 1-3+ returned 0 after 254631 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.703291] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.711660] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.720023] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.728385] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.735042] call 0000:00:1f.6+ returned 0 after 446226 usecs Oct 13 16:57:38 kblu3 kernel: [ 296.736746] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.745109] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.753470] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.761830] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.770191] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.778552] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.786912] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.786915] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110 Oct 13 16:57:38 kblu3 kernel: [ 296.786917] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:DP-1] status updated from disconnected to disconnected Oct 13 16:57:38 kblu3 kernel: [ 296.786929] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:57:38 kblu3 kernel: [ 296.787235] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) Oct 13 16:57:38 kblu3 kernel: [ 296.787250] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry Oct 13 16:57:38 kblu3 kernel: [ 296.800534] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) Oct 13 16:57:38 kblu3 kernel: [ 296.800548] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry Oct 13 16:57:38 kblu3 kernel: [ 296.800841] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) Oct 13 16:57:38 kblu3 kernel: [ 296.800857] [drm:intel_hdmi_set_edid [i915]] Assuming DP dual mode adaptor presence based on VBT Oct 13 16:57:38 kblu3 kernel: [ 296.800869] [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz) Oct 13 16:57:38 kblu3 kernel: [ 296.800872] [drm:drm_helper_hpd_irq_event] [CONNECTOR:50:HDMI-A-1] status updated from connected to connected Oct 13 16:57:38 kblu3 kernel: [ 296.800884] [drm:intel_dp_detect [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:38 kblu3 kernel: [ 296.800893] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected Oct 13 16:57:38 kblu3 kernel: [ 296.800904] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:38 kblu3 kernel: [ 296.801195] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) Oct 13 16:57:38 kblu3 kernel: [ 296.801206] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry Oct 13 16:57:38 kblu3 kernel: [ 296.801490] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) Oct 13 16:57:38 kblu3 kernel: [ 296.801493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc Oct 13 16:57:38 kblu3 kernel: [ 296.801781] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) Oct 13 16:57:38 kblu3 kernel: [ 296.801792] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry Oct 13 16:57:38 kblu3 kernel: [ 296.802082] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) Oct 13 16:57:38 kblu3 kernel: [ 296.802084] [drm:drm_helper_hpd_irq_event] [CONNECTOR:57:HDMI-A-2] status updated from disconnected to disconnected Oct 13 16:57:38 kblu3 kernel: [ 296.802136] [drm:intel_dp_detect [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:38 kblu3 kernel: [ 296.802152] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no Oct 13 16:57:38 kblu3 kernel: [ 296.802166] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 Oct 13 16:57:38 kblu3 kernel: [ 296.802179] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 Oct 13 16:57:38 kblu3 kernel: [ 296.802191] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 Oct 13 16:57:38 kblu3 kernel: [ 296.802543] [drm:drm_helper_hpd_irq_event] [CONNECTOR:37:eDP-1] status updated from connected to connected Oct 13 16:57:38 kblu3 kernel: [ 296.802555] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:38 kblu3 kernel: [ 296.810925] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.819287] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.827649] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.836010] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.844370] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.852731] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.861091] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.869451] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.877811] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.886172] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.894532] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.902892] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.911254] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.919613] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.927974] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.936334] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.944694] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.953054] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.961415] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.969775] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.978135] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.986496] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 296.994857] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.003218] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.011578] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.019939] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.028299] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.036659] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.045019] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.053380] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.061740] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.070100] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x7d4003ff Oct 13 16:57:38 kblu3 kernel: [ 297.070103] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110 Oct 13 16:57:38 kblu3 kernel: [ 297.070105] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:DP-1] status updated from disconnected to disconnected Oct 13 16:57:38 kblu3 kernel: [ 297.070117] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:57:38 kblu3 kernel: [ 297.083637] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) Oct 13 16:57:38 kblu3 kernel: [ 297.083652] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry Oct 13 16:57:38 kblu3 kernel: [ 297.083996] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) Oct 13 16:57:38 kblu3 kernel: [ 297.084012] [drm:intel_hdmi_set_edid [i915]] Assuming DP dual mode adaptor presence based on VBT Oct 13 16:57:38 kblu3 kernel: [ 297.084025] [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz) Oct 13 16:57:38 kblu3 kernel: [ 297.084030] [drm:drm_helper_hpd_irq_event] [CONNECTOR:50:HDMI-A-1] status updated from connected to connected Oct 13 16:57:38 kblu3 kernel: [ 297.084043] [drm:intel_dp_detect [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:38 kblu3 kernel: [ 297.084053] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:DP-2] status updated from disconnected to disconnected Oct 13 16:57:38 kblu3 kernel: [ 297.084065] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:38 kblu3 kernel: [ 297.084393] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) Oct 13 16:57:38 kblu3 kernel: [ 297.084404] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry Oct 13 16:57:38 kblu3 kernel: [ 297.084734] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) Oct 13 16:57:38 kblu3 kernel: [ 297.084749] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc Oct 13 16:57:38 kblu3 kernel: [ 297.085080] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) Oct 13 16:57:38 kblu3 kernel: [ 297.085090] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry Oct 13 16:57:38 kblu3 kernel: [ 297.085415] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) Oct 13 16:57:38 kblu3 kernel: [ 297.085419] [drm:drm_helper_hpd_irq_event] [CONNECTOR:57:HDMI-A-2] status updated from disconnected to disconnected Oct 13 16:57:38 kblu3 kernel: [ 297.086377] [drm:intel_opregion_register [i915]] More than 15 outputs detected via ACPI Oct 13 16:57:38 kblu3 kernel: [ 297.089564] call 0000:00:02.0+ returned 0 after 793603 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089610] calling intel_backlight+ @ 3378, parent: card0-eDP-1 Oct 13 16:57:38 kblu3 kernel: [ 297.089611] call intel_backlight+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089613] calling input5+ @ 3378, parent: LNXVIDEO:00 Oct 13 16:57:38 kblu3 kernel: [ 297.089614] call input5+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089618] calling regulatory.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 297.089618] call regulatory.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089620] calling coretemp.0+ @ 3378, parent: platform Oct 13 16:57:38 kblu3 kernel: [ 297.089620] call coretemp.0+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089628] calling input6+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 297.089628] call input6+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089629] calling input7+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 297.089629] call input7+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089630] calling input8+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 297.089631] call input8+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089631] calling input9+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 297.089632] call input9+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089633] calling input10+ @ 3378, parent: card0 Oct 13 16:57:38 kblu3 kernel: [ 297.089633] call input10+ returned 0 after 0 usecs Oct 13 16:57:38 kblu3 kernel: [ 297.089635] PM: resume of devices complete after 812.737 msecs Oct 13 16:57:38 kblu3 kernel: [ 297.089747] usb 1-3:1.0: rebind failed: -517 Oct 13 16:57:38 kblu3 kernel: [ 297.089748] usb 1-3:1.1: rebind failed: -517 Oct 13 16:57:38 kblu3 kernel: [ 297.089960] PM: Finishing wakeup. Oct 13 16:57:38 kblu3 kernel: [ 297.089960] Restarting tasks ... done. Oct 13 16:57:38 kblu3 kernel: [ 297.101425] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 Oct 13 16:57:38 kblu3 kernel: [ 297.102140] Bluetooth: hci0: Device revision is 16 Oct 13 16:57:38 kblu3 kernel: [ 297.102141] Bluetooth: hci0: Secure boot is enabled Oct 13 16:57:38 kblu3 kernel: [ 297.102142] Bluetooth: hci0: OTP lock is disabled Oct 13 16:57:38 kblu3 kernel: [ 297.102143] Bluetooth: hci0: API lock is enabled Oct 13 16:57:38 kblu3 kernel: [ 297.102143] Bluetooth: hci0: Debug lock is disabled Oct 13 16:57:38 kblu3 kernel: [ 297.102145] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 Oct 13 16:57:38 kblu3 kernel: [ 297.102157] bluetooth hci0: Direct firmware load for intel/ibt-12-16.sfi failed with error -2 Oct 13 16:57:38 kblu3 kernel: [ 297.102158] bluetooth hci0: Falling back to user helper Oct 13 16:57:38 kblu3 NetworkManager[668]: [1476370658.3758] device (enx0014d1b07a60): link disconnected (deferring action for 4 seconds) Oct 13 16:57:39 kblu3 NetworkManager[668]: [1476370659.3494] device (enx0014d1b07a60): link connected Oct 13 16:57:39 kblu3 NetworkManager[668]: [1476370659.3508] device (enx0014d1b07a60): DHCPv4 lease renewal requested Oct 13 16:57:39 kblu3 kernel: [ 298.070084] asix 1-7:1.0 enx0014d1b07a60: link up, 100Mbps, full-duplex, lpa 0xC5E1 Oct 13 16:57:39 kblu3 NetworkManager[668]: [1476370659.4158] dhcp4 (enx0014d1b07a60): canceled DHCP transaction, DHCP client pid 856 Oct 13 16:57:39 kblu3 NetworkManager[668]: [1476370659.4158] dhcp4 (enx0014d1b07a60): state changed bound -> done Oct 13 16:57:39 kblu3 NetworkManager[668]: [1476370659.4172] dhcp4 (enx0014d1b07a60): activation: beginning transaction (timeout in 45 seconds) Oct 13 16:57:39 kblu3 NetworkManager[668]: [1476370659.4197] dhcp4 (enx0014d1b07a60): dhclient started with pid 3451 Oct 13 16:57:40 kblu3 kernel: [ 298.828492] [drm] RC6 on Oct 13 16:57:41 kblu3 kernel: [ 300.012233] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off Oct 13 16:57:41 kblu3 kernel: [ 300.012341] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 Oct 13 16:57:41 kblu3 kernel: [ 300.012450] [drm:intel_power_well_disable [i915]] disabling power well 2 Oct 13 16:57:41 kblu3 kernel: [ 300.012503] [drm:skl_set_power_well [i915]] Disabling power well 2 Oct 13 16:57:41 kblu3 kernel: [ 300.012542] [drm:intel_power_well_disable [i915]] disabling DC off Oct 13 16:57:41 kblu3 kernel: [ 300.012581] [drm:skl_enable_dc6 [i915]] Enabling DC6 Oct 13 16:57:41 kblu3 kernel: [ 300.012617] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0816] address 10.102.162.199 Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0816] plen 22 (255.255.252.0) Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0816] gateway 10.102.160.1 Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0816] server identifier 163.33.253.68 Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0816] lease time 43200 Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0817] nameserver '10.248.2.1' Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0817] nameserver '10.216.46.196' Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0817] nameserver '163.33.253.68' Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0817] domain name 'tl.intel.com' Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0817] wins '143.185.63.31' Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0817] wins '163.33.7.86' Oct 13 16:57:43 kblu3 NetworkManager[668]: [1476370663.0817] dhcp4 (enx0014d1b07a60): state changed unknown -> bound Oct 13 16:57:43 kblu3 kernel: [ 302.104852] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 Oct 13 16:57:43 kblu3 kernel: [ 302.104916] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:57:43 kblu3 kernel: [ 302.104969] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:43 kblu3 kernel: [ 302.105031] [drm:intel_power_well_enable [i915]] enabling DC off Oct 13 16:57:43 kblu3 kernel: [ 302.105336] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00 Oct 13 16:57:43 kblu3 kernel: [ 302.105419] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on Oct 13 16:57:43 kblu3 kernel: [ 302.105509] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f Oct 13 16:57:43 kblu3 kernel: [ 302.105966] [drm:intel_edp_backlight_off [i915]] Oct 13 16:57:43 kblu3 kernel: [ 302.312105] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 Oct 13 16:57:43 kblu3 kernel: [ 302.312200] [drm:intel_disable_pipe [i915]] disabling pipe A Oct 13 16:57:43 kblu3 kernel: [ 302.324920] [drm:intel_edp_panel_off [i915]] Turn eDP port A panel power off Oct 13 16:57:43 kblu3 kernel: [ 302.324998] [drm:intel_edp_panel_off [i915]] Wait for panel power off time Oct 13 16:57:43 kblu3 kernel: [ 302.325103] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000 Oct 13 16:57:43 kblu3 kernel: [ 302.376826] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:43 kblu3 kernel: [ 302.376904] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 26 Oct 13 16:57:43 kblu3 kernel: [ 302.376962] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 Oct 13 16:57:43 kblu3 kernel: [ 302.377045] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] Oct 13 16:57:43 kblu3 kernel: [ 302.377100] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DDI B] Oct 13 16:57:43 kblu3 kernel: [ 302.377149] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DP-MST A] Oct 13 16:57:43 kblu3 kernel: [ 302.377194] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:DP-MST B] Oct 13 16:57:43 kblu3 kernel: [ 302.377236] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:DP-MST C] Oct 13 16:57:43 kblu3 kernel: [ 302.377276] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] Oct 13 16:57:43 kblu3 kernel: [ 302.377318] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] Oct 13 16:57:43 kblu3 kernel: [ 302.377357] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] Oct 13 16:57:43 kblu3 kernel: [ 302.377396] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] Oct 13 16:57:43 kblu3 kernel: [ 302.377443] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:43 kblu3 kernel: [ 302.377490] [drm:verify_connector_state [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:43 kblu3 kernel: [ 302.377533] [drm:verify_connector_state [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:57:43 kblu3 kernel: [ 302.377575] [drm:verify_connector_state [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:43 kblu3 kernel: [ 302.377615] [drm:verify_connector_state [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:43 kblu3 kernel: [ 302.377654] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:43 kblu3 kernel: [ 302.377694] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:57:43 kblu3 kernel: [ 302.377733] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 2 Oct 13 16:57:43 kblu3 kernel: [ 302.377772] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 3 Oct 13 16:57:43 kblu3 kernel: [ 302.377822] [drm:intel_power_well_disable [i915]] disabling DDI A/E power well Oct 13 16:57:43 kblu3 kernel: [ 302.377863] [drm:skl_set_power_well [i915]] Disabling DDI A/E power well Oct 13 16:57:43 kblu3 kernel: [ 302.377914] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] Oct 13 16:57:43 kblu3 kernel: [ 302.377959] [drm:intel_power_well_disable [i915]] disabling DC off Oct 13 16:57:43 kblu3 kernel: [ 302.378001] [drm:skl_enable_dc6 [i915]] Enabling DC6 Oct 13 16:57:43 kblu3 kernel: [ 302.378039] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 Oct 13 16:57:43 kblu3 kernel: [ 302.378482] [drm:intel_power_well_disable [i915]] disabling always-on Oct 13 16:57:44 kblu3 kernel: [ 302.382954] [drm:intel_atomic_check [i915]] [CONNECTOR:37:eDP-1] checking for sink bpp constrains Oct 13 16:57:44 kblu3 kernel: [ 302.383001] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 Oct 13 16:57:44 kblu3 kernel: [ 302.383052] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:44 kblu3 kernel: [ 302.383098] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 241500KHz Oct 13 16:57:44 kblu3 kernel: [ 302.383147] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 4 clock 270000 bpp 24 Oct 13 16:57:44 kblu3 kernel: [ 302.383186] [drm:intel_dp_compute_config [i915]] DP link bw required 579600 available 864000 Oct 13 16:57:44 kblu3 kernel: [ 302.383228] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.383272] [drm:intel_dump_pipe_config [i915]] [CRTC:26:pipe A][modeset] config ffff880261ebd800 for pipe A Oct 13 16:57:44 kblu3 kernel: [ 302.383310] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP Oct 13 16:57:44 kblu3 kernel: [ 302.383344] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.383378] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.383413] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m: 5627357, gmch_n: 8388608, link_m: 468946, link_n: 524288, tu: 64 Oct 13 16:57:44 kblu3 kernel: [ 302.383445] [drm:intel_dump_pipe_config [i915]] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.383476] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.383505] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:57:44 kblu3 kernel: [ 302.383515] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:57:44 kblu3 kernel: [ 302.383546] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:57:44 kblu3 kernel: [ 302.383552] [drm:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1442 1447 1480 0x48 0xa Oct 13 16:57:44 kblu3 kernel: [ 302.383584] [drm:intel_dump_pipe_config [i915]] crtc timings: 241500 2560 2608 2640 2720 1440 1442 1447 1480, type: 0x48 flags: 0xa Oct 13 16:57:44 kblu3 kernel: [ 302.383614] [drm:intel_dump_pipe_config [i915]] port clock: 270000 Oct 13 16:57:44 kblu3 kernel: [ 302.383643] [drm:intel_dump_pipe_config [i915]] pipe src size: 2560x1440 Oct 13 16:57:44 kblu3 kernel: [ 302.383673] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 Oct 13 16:57:44 kblu3 kernel: [ 302.383703] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:57:44 kblu3 kernel: [ 302.383732] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:57:44 kblu3 kernel: [ 302.383761] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.383791] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.383820] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 Oct 13 16:57:44 kblu3 kernel: [ 302.383848] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:57:44 kblu3 kernel: [ 302.383878] [drm:intel_dump_pipe_config [i915]] [PLANE:23:plane 1A] disabled, scaler_id = -1 Oct 13 16:57:44 kblu3 kernel: [ 302.383923] [drm:intel_dump_pipe_config [i915]] [PLANE:25:cursor A] disabled, scaler_id = -1 Oct 13 16:57:44 kblu3 kernel: [ 302.383952] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1 Oct 13 16:57:44 kblu3 kernel: [ 302.383993] [drm:intel_atomic_check [i915]] [CONNECTOR:50:HDMI-A-1] checking for sink bpp constrains Oct 13 16:57:44 kblu3 kernel: [ 302.384028] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24 Oct 13 16:57:44 kblu3 kernel: [ 302.384069] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output Oct 13 16:57:44 kblu3 kernel: [ 302.384108] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpc to 24 for HDMI Oct 13 16:57:44 kblu3 kernel: [ 302.384144] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384178] [drm:intel_dump_pipe_config [i915]] [CRTC:30:pipe B][modeset] config ffff880261ebc800 for pipe B Oct 13 16:57:44 kblu3 kernel: [ 302.384222] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B Oct 13 16:57:44 kblu3 kernel: [ 302.384231] [drm:intel_dump_pipe_config [i915]] pipe bpp: 24, dithering: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384240] [drm:intel_dump_pipe_config [i915]] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384249] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384257] [drm:intel_dump_pipe_config [i915]] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384266] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384274] [drm:intel_dump_pipe_config [i915]] requested mode: Oct 13 16:57:44 kblu3 kernel: [ 302.384276] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 Oct 13 16:57:44 kblu3 kernel: [ 302.384284] [drm:intel_dump_pipe_config [i915]] adjusted mode: Oct 13 16:57:44 kblu3 kernel: [ 302.384286] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 Oct 13 16:57:44 kblu3 kernel: [ 302.384295] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 Oct 13 16:57:44 kblu3 kernel: [ 302.384303] [drm:intel_dump_pipe_config [i915]] port clock: 148500 Oct 13 16:57:44 kblu3 kernel: [ 302.384311] [drm:intel_dump_pipe_config [i915]] pipe src size: 1920x1080 Oct 13 16:57:44 kblu3 kernel: [ 302.384320] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 Oct 13 16:57:44 kblu3 kernel: [ 302.384328] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 Oct 13 16:57:44 kblu3 kernel: [ 302.384336] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled Oct 13 16:57:44 kblu3 kernel: [ 302.384344] [drm:intel_dump_pipe_config [i915]] ips: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384352] [drm:intel_dump_pipe_config [i915]] double wide: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384361] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80400173, cfgcr2: 0x3a5 Oct 13 16:57:44 kblu3 kernel: [ 302.384369] [drm:intel_dump_pipe_config [i915]] planes on this crtc Oct 13 16:57:44 kblu3 kernel: [ 302.384377] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1B] disabled, scaler_id = -1 Oct 13 16:57:44 kblu3 kernel: [ 302.384385] [drm:intel_dump_pipe_config [i915]] [PLANE:29:cursor B] disabled, scaler_id = -1 Oct 13 16:57:44 kblu3 kernel: [ 302.384393] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2B] disabled, scaler_id = -1 Oct 13 16:57:44 kblu3 kernel: [ 302.384405] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 337500, actual 337500 Oct 13 16:57:44 kblu3 kernel: [ 302.384419] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:57:44 kblu3 kernel: [ 302.384429] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:57:44 kblu3 kernel: [ 302.384442] [drm:intel_find_shared_dpll [i915]] [CRTC:26:pipe A] allocated DPLL 0 Oct 13 16:57:44 kblu3 kernel: [ 302.384453] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A Oct 13 16:57:44 kblu3 kernel: [ 302.384464] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 Oct 13 16:57:44 kblu3 kernel: [ 302.384476] [drm:intel_find_shared_dpll [i915]] [CRTC:30:pipe B] allocated DPLL 1 Oct 13 16:57:44 kblu3 kernel: [ 302.384486] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe B Oct 13 16:57:44 kblu3 kernel: [ 302.384496] [drm:skl_update_scaler_crtc [i915]] Updating scaler for [CRTC:30:pipe B] scaler_user index 1.31 Oct 13 16:57:44 kblu3 kernel: [ 302.384516] [drm:intel_power_well_enable [i915]] enabling always-on Oct 13 16:57:44 kblu3 kernel: [ 302.384525] [drm:intel_power_well_enable [i915]] enabling DC off Oct 13 16:57:44 kblu3 kernel: [ 302.384791] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00 Oct 13 16:57:44 kblu3 kernel: [ 302.384804] [drm:intel_power_well_enable [i915]] enabling DDI A/E power well Oct 13 16:57:44 kblu3 kernel: [ 302.384813] [drm:skl_set_power_well [i915]] Enabling DDI A/E power well Oct 13 16:57:44 kblu3 kernel: [ 302.384822] [drm:intel_power_well_enable [i915]] enabling power well 2 Oct 13 16:57:44 kblu3 kernel: [ 302.384832] [drm:skl_set_power_well [i915]] Enabling power well 2 Oct 13 16:57:44 kblu3 kernel: [ 302.384855] [drm:intel_power_well_enable [i915]] enabling DDI B power well Oct 13 16:57:44 kblu3 kernel: [ 302.384871] [drm:skl_set_power_well [i915]] Enabling DDI B power well Oct 13 16:57:44 kblu3 kernel: [ 302.384885] [drm:intel_disable_sagv [i915]] Disabling the SAGV Oct 13 16:57:44 kblu3 kernel: [ 302.387067] [drm:intel_atomic_commit_tail [i915]] [ENCODER:36:DDI A] Oct 13 16:57:44 kblu3 kernel: [ 302.387082] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DDI B] Oct 13 16:57:44 kblu3 kernel: [ 302.387095] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DP-MST A] Oct 13 16:57:44 kblu3 kernel: [ 302.387108] [drm:intel_atomic_commit_tail [i915]] [ENCODER:48:DP-MST B] Oct 13 16:57:44 kblu3 kernel: [ 302.387118] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:DP-MST C] Oct 13 16:57:44 kblu3 kernel: [ 302.387129] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] Oct 13 16:57:44 kblu3 kernel: [ 302.387141] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] Oct 13 16:57:44 kblu3 kernel: [ 302.387150] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] Oct 13 16:57:44 kblu3 kernel: [ 302.387160] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] Oct 13 16:57:44 kblu3 kernel: [ 302.387173] [drm:verify_connector_state [i915]] [CONNECTOR:46:DP-1] Oct 13 16:57:44 kblu3 kernel: [ 302.387186] [drm:verify_connector_state [i915]] [CONNECTOR:53:DP-2] Oct 13 16:57:44 kblu3 kernel: [ 302.387197] [drm:verify_connector_state [i915]] [CONNECTOR:57:HDMI-A-2] Oct 13 16:57:44 kblu3 kernel: [ 302.387207] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:44 kblu3 kernel: [ 302.387219] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:57:44 kblu3 kernel: [ 302.387229] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 2 Oct 13 16:57:44 kblu3 kernel: [ 302.387239] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 3 Oct 13 16:57:44 kblu3 kernel: [ 302.387255] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 26 Oct 13 16:57:44 kblu3 kernel: [ 302.387266] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 Oct 13 16:57:44 kblu3 kernel: [ 302.387318] [drm:edp_panel_on [i915]] Turn eDP port A panel power on Oct 13 16:57:44 kblu3 kernel: [ 302.387336] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle Oct 13 16:57:44 kblu3 kernel: [ 302.408233] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 Oct 13 16:57:44 kblu3 kernel: [ 302.408256] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long Oct 13 16:57:44 kblu3 kernel: [ 302.408276] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 Oct 13 16:57:44 kblu3 kernel: [ 302.408355] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A Oct 13 16:57:44 kblu3 kernel: [ 302.956233] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000 Oct 13 16:57:44 kblu3 kernel: [ 302.956296] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:44 kblu3 kernel: [ 302.956371] [drm:edp_panel_on [i915]] Wait for panel power on Oct 13 16:57:44 kblu3 kernel: [ 302.956474] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003 Oct 13 16:57:44 kblu3 kernel: [ 303.046843] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 Oct 13 16:57:44 kblu3 kernel: [ 303.046904] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long Oct 13 16:57:44 kblu3 kernel: [ 303.046960] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1 Oct 13 16:57:44 kblu3 kernel: [ 303.047045] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A Oct 13 16:57:44 kblu3 kernel: [ 303.158468] [drm:wait_panel_status [i915]] Wait complete Oct 13 16:57:44 kblu3 kernel: [ 303.158557] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on Oct 13 16:57:44 kblu3 kernel: [ 303.158657] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b Oct 13 16:57:44 kblu3 kernel: [ 303.160164] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 Oct 13 16:57:44 kblu3 kernel: [ 303.160218] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 Oct 13 16:57:44 kblu3 kernel: [ 303.160265] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 Oct 13 16:57:44 kblu3 kernel: [ 303.160312] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 Oct 13 16:57:44 kblu3 kernel: [ 303.164842] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 01000000 Oct 13 16:57:44 kblu3 kernel: [ 303.164866] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 Oct 13 16:57:44 kblu3 kernel: [ 303.164877] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1 Oct 13 16:57:44 kblu3 kernel: [ 303.169415] [drm:intel_dp_start_link_train [i915]] clock recovery OK Oct 13 16:57:44 kblu3 kernel: [ 303.169439] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 Oct 13 16:57:44 kblu3 kernel: [ 303.173984] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful Oct 13 16:57:44 kblu3 kernel: [ 303.174166] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff880261ebd800 Oct 13 16:57:44 kblu3 kernel: [ 303.174412] [drm:intel_enable_pipe [i915]] enabling pipe A Oct 13 16:57:44 kblu3 kernel: [ 303.174454] [drm:intel_edp_backlight_on.part.27 [i915]] Oct 13 16:57:44 kblu3 kernel: [ 303.174466] [drm:intel_panel_enable_backlight [i915]] pipe A Oct 13 16:57:44 kblu3 kernel: [ 303.174529] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 937 Oct 13 16:57:44 kblu3 kernel: [ 303.174751] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS Oct 13 16:57:44 kblu3 kernel: [ 303.174791] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 2, on? 0) for crtc 30 Oct 13 16:57:44 kblu3 kernel: [ 303.174802] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 Oct 13 16:57:44 kblu3 kernel: [ 303.176880] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff880261ebc800 Oct 13 16:57:44 kblu3 kernel: [ 303.177115] [drm:intel_enable_pipe [i915]] enabling pipe B Oct 13 16:57:44 kblu3 kernel: [ 303.194268] [drm:verify_connector_state [i915]] [CONNECTOR:37:eDP-1] Oct 13 16:57:44 kblu3 kernel: [ 303.194291] [drm:intel_atomic_commit_tail [i915]] [CRTC:26:pipe A] Oct 13 16:57:44 kblu3 kernel: [ 303.194320] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 0 Oct 13 16:57:44 kblu3 kernel: [ 303.194340] [drm:verify_connector_state [i915]] [CONNECTOR:50:HDMI-A-1] Oct 13 16:57:44 kblu3 kernel: [ 303.194358] [drm:intel_atomic_commit_tail [i915]] [CRTC:30:pipe B] Oct 13 16:57:44 kblu3 kernel: [ 303.194383] [drm:verify_single_dpll_state.isra.113 [i915]] DPLL 1 Oct 13 16:57:47 kblu3 kernel: [ 306.208000] Setting dangerous option enable_psr - tainting kernel Oct 13 16:57:47 kblu3 kernel: [ 306.208063] Setting dangerous option enable_fbc - tainting kernel Oct 13 16:57:47 kblu3 kernel: [ 306.208223] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:47 kblu3 kernel: [ 306.208287] [drm:_i915_gem_object_create_stolen [i915]] offset=0x0, size=16384 Oct 13 16:57:47 kblu3 kernel: [ 306.208732] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:47 kblu3 kernel: [ 306.208797] [drm:_i915_gem_object_create_stolen [i915]] offset=0x4000, size=16384 Oct 13 16:57:47 kblu3 kernel: [ 306.208961] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:47 kblu3 kernel: [ 306.209008] [drm:_i915_gem_object_create_stolen [i915]] offset=0x8000, size=16384 Oct 13 16:57:47 kblu3 kernel: [ 306.209103] [drm:i915_gem_object_create_stolen [i915]] creating stolen object: size=4000 Oct 13 16:57:47 kblu3 kernel: [ 306.209155] [drm:_i915_gem_object_create_stolen [i915]] offset=0xc000, size=16384 Oct 13 16:57:47 kblu3 kernel: [ 306.209518] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 Oct 13 16:57:47 kblu3 kernel: [ 306.209531] [drm:intel_plane_atomic_calc_changes [i915]] Updating scaler for [PLANE:28:plane 1B] scaler_user index 1.3 Oct 13 16:57:47 kblu3 kernel: [ 306.412194] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off Oct 13 16:57:47 kblu3 kernel: [ 306.412292] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007