[ 0.000000] Linux version 4.6.0-rc7-drm-intel-nightly-ww20-commit-5528ede+ (gfx@GM-GFX-QA02) (gcc version 4.9.3 (Ubuntu 4.9.3-8ubuntu2~14.04) ) #1 SMP Sat May 14 04:13:58 CDT 2016 [ 0.000000] Command line: vmlinuz root=/dev/sda2 initrd=initrd.img i915.enable_guc_submission=1 i915.preliminary_hw_support=1 maxcpus=1 no_console_suspend acpi_enforce_resources=lax log_buf_len=4M i915.enable_rc6=0 drm.debug=14 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000f000000-0x0000000012151fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000012152000-0x000000007801dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007801e000-0x0000000079dcdfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079dce000-0x0000000079e2dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079e2e000-0x0000000079e5dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000079e5e000-0x000000007ac76fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ac77000-0x000000007ac77fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ac78000-0x000000007aca1fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007aca2000-0x000000007affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by EDK II [ 0.000000] efi: ACPI=0x79e5d000 ACPI 2.0=0x79e5d014 ESRT=0x79d99000 SMBIOS=0x7817f000 SMBIOS 3.0=0x7817d000 PROP=0x7a093100 [ 0.000000] efi: requested map not found. [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 0100000000 mask 7F00000000 write-back [ 0.000000] 4 base 0200000000 mask 7F80000000 write-back [ 0.000000] 5 base 00FF800000 mask 70FF800000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE [ 0.000000] BRK [0x0201c000, 0x0201cfff] PGTABLE [ 0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE [ 0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE [ 0.000000] BRK [0x0201f000, 0x0201ffff] PGTABLE [ 0.000000] BRK [0x02020000, 0x02020fff] PGTABLE [ 0.000000] log_buf_len: 4194304 bytes [ 0.000000] early log buf free: 257456(98%) [ 0.000000] RAMDISK: [mem 0x72c2b000-0x74a17fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000079E5D014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x0000000079E35188 0000DC (v01 INTEL EDK2 00000003 BRXT 01000013) [ 0.000000] ACPI: FACP 0x0000000079E55000 00010C (v05 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160108/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160108/tbfadt-704) [ 0.000000] ACPI: DSDT 0x0000000079E47000 008C0A (v02 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: FACS 0x0000000079E1C000 000040 [ 0.000000] ACPI: SSDT 0x0000000079E5B000 0003C6 (v02 INTEL Tpm2Tabl 00001000 INTL 20150818) [ 0.000000] ACPI: TPM2 0x0000000079E5A000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: UEFI 0x0000000079E24000 000042 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: BDAT 0x0000000079E59000 000030 (v02 00000000 00000000) [ 0.000000] ACPI: DBG2 0x0000000079E58000 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: DBGP 0x0000000079E57000 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: HPET 0x0000000079E54000 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: LPIT 0x0000000079E53000 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: APIC 0x0000000079E52000 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: MCFG 0x0000000079E51000 00003C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: NPKT 0x0000000079E50000 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E3D000 004549 (v02 INTEL RVPRtd3 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E3C000 000B53 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E3A000 00165B (v01 Intel_ Platform 00001000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E39000 000400 (v02 PmRef Cpu0Ist 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E38000 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E37000 000356 (v02 PmRef Cpu0Tst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E36000 00017C (v02 PmRef ApTst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E32000 00277A (v02 SaSsdt SaSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: FPDT 0x0000000079E5C000 000044 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: WDAT 0x0000000079E56000 000104 (v01 00000000 00000000) [ 0.000000] ACPI: NHLT 0x0000000079E45000 001A50 (v00 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x27fbfa000-0x27fbfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000effffff] [ 0.000000] node 0: [mem 0x0000000012152000-0x000000007801dfff] [ 0.000000] node 0: [mem 0x0000000079e5e000-0x000000007ac76fff] [ 0.000000] node 0: [mem 0x000000007aca2000-0x000000007affffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.000000] On node 0 totalpages: 2056159 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7490 pages used for memmap [ 0.000000] DMA32 zone: 479299 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0f000000-0x12151fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7801e000-0x79dcdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x79dce000-0x79e2dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x79e2e000-0x79e5dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac77000-0x7ac77fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac78000-0x7aca1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff88027f800000 s99032 r8192 d32040 u524288 [ 0.000000] pcpu-alloc: s99032 r8192 d32040 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2024008 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: vmlinuz root=/dev/sda2 initrd=initrd.img i915.enable_guc_submission=1 i915.preliminary_hw_support=1 maxcpus=1 no_console_suspend acpi_enforce_resources=lax log_buf_len=4M i915.enable_rc6=0 drm.debug=14 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7930384K/8224636K available (8147K kernel code, 1363K rwdata, 3688K rodata, 1504K init, 1292K bss, 294252K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4437.528 MHz processor [ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 8875.05 BogoMIPS (lpj=17750112) [ 0.000039] pid_max: default: 32768 minimum: 301 [ 0.000044] ACPI: Core revision 20160108 [ 0.009867] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.010175] Security Framework initialized [ 0.010179] Yama: becoming mindful. [ 0.010184] AppArmor: AppArmor initialized [ 0.010519] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.011723] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012265] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012274] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012427] CPU: Physical Processor ID: 0 [ 0.012430] CPU: Processor Core ID: 0 [ 0.012438] mce: CPU supports 7 MCE banks [ 0.012457] CPU0: Thermal monitoring enabled (TM1) [ 0.012471] process: using mwait in idle threads [ 0.012474] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.012476] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.022754] ftrace: allocating 31986 entries in 125 pages [ 0.042280] smpboot: Max logical packages: 1 [ 0.042284] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.042614] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.043930] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083619] TSC deadline timer enabled [ 0.083622] smpboot: CPU0: Intel 06/5c (family: 0x6, model: 0x5c, stepping: 0x9) [ 0.083634] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.083641] ... version: 4 [ 0.083643] ... bit width: 48 [ 0.083644] ... generic registers: 4 [ 0.083646] ... value mask: 0000ffffffffffff [ 0.083648] ... max period: 0000ffffffffffff [ 0.083650] ... fixed-purpose events: 3 [ 0.083652] ... event mask: 000000070000000f [ 0.084076] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.084093] x86: Booted up 1 node, 1 CPUs [ 0.084096] smpboot: Total of 1 processors activated (8875.05 BogoMIPS) [ 0.084513] devtmpfs: initialized [ 0.084554] x86/mm: Memory block size: 128MB [ 0.086354] evm: security.selinux [ 0.086356] evm: security.SMACK64 [ 0.086358] evm: security.SMACK64EXEC [ 0.086360] evm: security.SMACK64TRANSMUTE [ 0.086361] evm: security.SMACK64MMAP [ 0.086363] evm: security.ima [ 0.086365] evm: security.capability [ 0.086435] PM: Registering ACPI NVS region [mem 0x79dce000-0x79e2dfff] (393216 bytes) [ 0.086442] PM: Registering ACPI NVS region [mem 0x7ac77000-0x7ac77fff] (4096 bytes) [ 0.086485] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.086528] pinctrl core: initialized pinctrl subsystem [ 0.086614] RTC time: 23:05:27, date: 01/02/98 [ 0.087734] NET: Registered protocol family 16 [ 0.087873] cpuidle: using governor ladder [ 0.087877] cpuidle: using governor menu [ 0.087880] PCCT header not found. [ 0.087966] ACPI: bus type PCI registered [ 0.087969] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.088017] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.088021] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.088026] PCI: Using configuration type 1 for base access [ 0.088950] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.088953] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.089114] ACPI: Added _OSI(Module Device) [ 0.089117] ACPI: Added _OSI(Processor Device) [ 0.089119] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.089121] ACPI: Added _OSI(Processor Aggregator Device) [ 0.089428] ACPI: Executed 6 blocks of module-level executable AML code [ 0.093017] ACPI: Dynamic OEM Table Load: [ 0.093024] ACPI: SSDT 0xFFFF880275FF7400 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20150818) [ 0.093486] ACPI: Dynamic OEM Table Load: [ 0.093492] ACPI: SSDT 0xFFFF880275FF7600 00015F (v02 PmRef ApIst 00003000 INTL 20150818) [ 0.093869] ACPI: Dynamic OEM Table Load: [ 0.093874] ACPI: SSDT 0xFFFF880275FB2D80 00008D (v02 PmRef ApCst 00003000 INTL 20150818) [ 0.094634] ACPI : EC: EC started [ 0.323781] ACPI: Interpreter enabled [ 0.323797] ACPI: (supports S0 S3 S4 S5) [ 0.323800] ACPI: Using IOAPIC for interrupt routing [ 0.323821] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.324839] ACPI: Power Resource [PXP] (off) [ 0.325182] ACPI: Power Resource [PXP] (on) [ 0.343990] ACPI: Power Resource [PXP] (on) [ 0.363961] ACPI: Power Resource [PXP] (off) [ 0.364260] ACPI: Power Resource [PXP] (off) [ 0.364557] ACPI: Power Resource [PXP] (off) [ 0.364933] ACPI: Power Resource [SPPR] (on) [ 0.383830] ACPI: Power Resource [ODPR] (on) [ 0.383923] ACPI: Power Resource [SPPR] (off) [ 0.384099] ACPI: Power Resource [ODPR] (on) [ 0.384273] ACPI: Power Resource [UPPR] (on) [ 0.384428] ACPI: Power Resource [UPPR] (on) [ 0.384558] ACPI: Power Resource [UPPR] (on) [ 0.384776] ACPI: Power Resource [UPPR] (on) [ 0.384928] ACPI: Power Resource [UPPR] (on) [ 0.385059] ACPI: Power Resource [UPPR] (on) [ 0.385207] ACPI: Power Resource [USBC] (on) [ 0.385277] ACPI: Power Resource [SDPR] (on) [ 0.399941] ACPI: Power Resource [LSPR] (on) [ 0.401508] ACPI: Power Resource [PAUD] (on) [ 0.403305] ACPI: Power Resource [FN00] (on) [ 0.488025] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.488031] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.488455] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.488466] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.488785] PCI host bridge to bus 0000:00 [ 0.488789] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.488791] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.488794] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.488796] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.488799] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.488802] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.488806] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.488809] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] [ 0.488812] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] [ 0.488816] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] [ 0.488819] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window] [ 0.488822] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window] [ 0.488826] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window] [ 0.488829] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window] [ 0.488832] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window] [ 0.488835] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window] [ 0.488839] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window] [ 0.488842] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window] [ 0.488845] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window] [ 0.488849] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.488855] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000 [ 0.489010] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000 [ 0.489016] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.489020] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.489023] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.489164] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000 [ 0.489169] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit] [ 0.489310] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300 [ 0.489320] pci 0000:00:0e.0: reg 0x10: [mem 0x92310000-0x92313fff 64bit] [ 0.489332] pci 0000:00:0e.0: reg 0x20: [mem 0x92000000-0x920fffff 64bit] [ 0.489356] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold [ 0.489488] pci 0000:00:0e.0: System wakeup disabled by ACPI [ 0.489516] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000 [ 0.489529] pci 0000:00:0f.0: reg 0x10: [mem 0x92318000-0x92318fff 64bit] [ 0.489567] pci 0000:00:0f.0: PME# supported from D3hot [ 0.489691] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007 [ 0.489702] pci 0000:00:11.0: reg 0x10: [mem 0x92314000-0x92315fff 64bit] [ 0.489708] pci 0000:00:11.0: reg 0x18: [mem 0x9231b000-0x9231bfff 64bit] [ 0.489854] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601 [ 0.489861] pci 0000:00:12.0: reg 0x10: [mem 0x92316000-0x92317fff] [ 0.489864] pci 0000:00:12.0: reg 0x14: [mem 0x92330000-0x923300ff] [ 0.489868] pci 0000:00:12.0: reg 0x18: [io 0x2080-0x2087] [ 0.489871] pci 0000:00:12.0: reg 0x1c: [io 0x2088-0x208b] [ 0.489875] pci 0000:00:12.0: reg 0x20: [io 0x2060-0x207f] [ 0.489878] pci 0000:00:12.0: reg 0x24: [mem 0x9232e000-0x9232e7ff] [ 0.489895] pci 0000:00:12.0: PME# supported from D3hot [ 0.490028] pci 0000:00:13.0: [8086:5ada] type 01 class 0x060400 [ 0.490057] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.490189] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.490224] pci 0000:00:14.0: [8086:5ad7] type 01 class 0x060400 [ 0.490257] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold [ 0.490390] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.490424] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330 [ 0.490434] pci 0000:00:15.0: reg 0x10: [mem 0x92300000-0x9230ffff 64bit] [ 0.490463] pci 0000:00:15.0: PME# supported from D3hot D3cold [ 0.490567] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.490602] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000 [ 0.490611] pci 0000:00:16.0: reg 0x10: [mem 0x9231c000-0x9231cfff 64bit] [ 0.490756] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000 [ 0.490766] pci 0000:00:16.1: reg 0x10: [mem 0x9231d000-0x9231dfff 64bit] [ 0.490908] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000 [ 0.490917] pci 0000:00:16.2: reg 0x10: [mem 0x9231e000-0x9231efff 64bit] [ 0.491062] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000 [ 0.491072] pci 0000:00:16.3: reg 0x10: [mem 0x9231f000-0x9231ffff 64bit] [ 0.491219] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000 [ 0.491229] pci 0000:00:17.0: reg 0x10: [mem 0x92320000-0x92320fff 64bit] [ 0.491373] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000 [ 0.491383] pci 0000:00:17.1: reg 0x10: [mem 0x92321000-0x92321fff 64bit] [ 0.491526] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000 [ 0.491535] pci 0000:00:17.2: reg 0x10: [mem 0x92322000-0x92322fff 64bit] [ 0.491681] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000 [ 0.491691] pci 0000:00:17.3: reg 0x10: [mem 0x92323000-0x92323fff 64bit] [ 0.491842] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000 [ 0.491851] pci 0000:00:18.0: reg 0x10: [mem 0x92324000-0x92324fff 64bit] [ 0.491996] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000 [ 0.492006] pci 0000:00:18.1: reg 0x10: [mem 0x92325000-0x92325fff 64bit] [ 0.492148] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000 [ 0.492157] pci 0000:00:18.2: reg 0x10: [mem 0x92326000-0x92326fff 64bit] [ 0.492301] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000 [ 0.492311] pci 0000:00:18.3: reg 0x10: [mem 0x92327000-0x92327fff 64bit] [ 0.492459] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000 [ 0.492468] pci 0000:00:19.0: reg 0x10: [mem 0x92328000-0x92328fff 64bit] [ 0.492613] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000 [ 0.492622] pci 0000:00:19.1: reg 0x10: [mem 0x92329000-0x92329fff 64bit] [ 0.492766] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000 [ 0.492776] pci 0000:00:19.2: reg 0x10: [mem 0x9232a000-0x9232afff 64bit] [ 0.492930] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501 [ 0.492938] pci 0000:00:1b.0: reg 0x10: [mem 0x9232b000-0x9232bfff 64bit] [ 0.493091] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501 [ 0.493100] pci 0000:00:1c.0: reg 0x10: [mem 0x9232c000-0x9232cfff 64bit] [ 0.493253] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501 [ 0.493262] pci 0000:00:1e.0: reg 0x10: [mem 0x9232d000-0x9232dfff 64bit] [ 0.493406] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100 [ 0.493561] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500 [ 0.493577] pci 0000:00:1f.1: reg 0x10: [mem 0x9232f000-0x9232f0ff 64bit] [ 0.493598] pci 0000:00:1f.1: reg 0x20: [io 0x2040-0x205f] [ 0.493773] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.493783] pci 0000:01:00.0: reg 0x10: [mem 0x92200000-0x9221ffff] [ 0.493794] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f] [ 0.493802] pci 0000:01:00.0: reg 0x1c: [mem 0x92220000-0x92223fff] [ 0.493846] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.493867] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.499822] pci 0000:00:13.0: PCI bridge to [bus 01] [ 0.499826] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 0.499827] pci 0000:00:13.0: bridge window [mem 0x92200000-0x922fffff] [ 0.499947] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.500041] pci 0000:02:00.0: reg 0x10: [mem 0x92100000-0x92101fff 64bit] [ 0.500094] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 0.500236] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.500328] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.500489] pci 0000:00:14.0: PCI bridge to [bus 02] [ 0.500494] pci 0000:00:14.0: bridge window [mem 0x92100000-0x921fffff] [ 0.501855] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.501897] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.501938] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.501980] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.502019] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.502059] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.502098] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.502138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.502595] ACPI: Enabled 2 GPEs in block 00 to 7F [ 0.502638] ACPI : EC: GPE = 0x2b, I/O: command/status = 0x66, data = 0x62 [ 0.502722] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.502725] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.502731] vgaarb: loaded [ 0.502732] vgaarb: bridge control possible 0000:00:02.0 [ 0.502878] SCSI subsystem initialized [ 0.502907] libata version 3.00 loaded. [ 0.502921] ACPI: bus type USB registered [ 0.502934] usbcore: registered new interface driver usbfs [ 0.502941] usbcore: registered new interface driver hub [ 0.502951] usbcore: registered new device driver usb [ 0.503059] PCI: Using ACPI for IRQ routing [ 0.504835] PCI: pci_cache_line_size set to 64 bytes [ 0.504958] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.504959] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.504960] e820: reserve RAM buffer [mem 0x0f000000-0x0fffffff] [ 0.504961] e820: reserve RAM buffer [mem 0x7801e000-0x7bffffff] [ 0.504962] e820: reserve RAM buffer [mem 0x7ac77000-0x7bffffff] [ 0.504963] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 0.505033] NetLabel: Initializing [ 0.505035] NetLabel: domain hash size = 128 [ 0.505037] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.505045] NetLabel: unlabeled traffic allowed by default [ 0.505146] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.505151] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 0.505917] clocksource: Switched to clocksource hpet [ 0.509541] VFS: Disk quotas dquot_6.6.0 [ 0.509554] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.509612] AppArmor: AppArmor Filesystem Enabled [ 0.509650] pnp: PnP ACPI init [ 0.509742] system 00:00: [io 0x06a4] has been reserved [ 0.509745] system 00:00: [io 0x06a0] has been reserved [ 0.509749] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.509815] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:13.0 BAR 13 [io 0x1000-0x1fff] [ 0.509837] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.509839] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.509842] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.509844] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.509848] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.509887] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.509930] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.510158] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.510162] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.510164] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.510167] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.510169] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.510172] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved [ 0.510175] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved [ 0.510177] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.510180] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.510183] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.510307] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.510392] pnp: PnP ACPI: found 6 devices [ 0.515989] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.516008] pci 0000:00:13.0: PCI bridge to [bus 01] [ 0.516011] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 0.516015] pci 0000:00:13.0: bridge window [mem 0x92200000-0x922fffff] [ 0.516020] pci 0000:00:14.0: PCI bridge to [bus 02] [ 0.516024] pci 0000:00:14.0: bridge window [mem 0x92100000-0x921fffff] [ 0.516030] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.516032] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.516033] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.516034] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.516035] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.516036] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.516037] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.516038] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window] [ 0.516039] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window] [ 0.516040] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window] [ 0.516041] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window] [ 0.516042] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window] [ 0.516044] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window] [ 0.516045] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window] [ 0.516046] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window] [ 0.516047] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window] [ 0.516048] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window] [ 0.516049] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window] [ 0.516050] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window] [ 0.516051] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.516052] pci_bus 0000:01: resource 1 [mem 0x92200000-0x922fffff] [ 0.516054] pci_bus 0000:02: resource 1 [mem 0x92100000-0x921fffff] [ 0.516071] NET: Registered protocol family 2 [ 0.516194] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.516330] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.516505] TCP: Hash tables configured (established 65536 bind 65536) [ 0.516528] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.516568] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.516632] NET: Registered protocol family 1 [ 0.516645] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.516836] PCI: CLS 64 bytes, default 64 [ 0.516866] Trying to unpack rootfs image as initramfs... [ 0.833477] Freeing initrd memory: 30644K (ffff880072c2b000 - ffff880074a18000) [ 0.833507] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.833511] software IO TLB [mem 0x6ec2b000-0x72c2b000] (64MB) mapped at [ffff88006ec2b000-ffff880072c2afff] [ 0.833619] Scanning for low memory corruption every 60 seconds [ 0.833824] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.833842] audit: initializing netlink subsys (disabled) [ 0.833853] audit: type=2000 audit(4039542328.031:1): initialized [ 0.834063] Initialise system trusted keyring [ 0.834114] workingset: timestamp_bits=38 max_order=21 bucket_order=0 [ 0.835188] zbud: loaded [ 0.835539] fuse init (API version 7.24) [ 0.835627] Key type big_key registered [ 0.835862] Key type asymmetric registered [ 0.835866] Asymmetric key parser 'x509' registered [ 0.835892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.835914] io scheduler noop registered [ 0.835917] io scheduler deadline registered (default) [ 0.835938] io scheduler cfq registered [ 0.836102] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt [ 0.836105] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.836109] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded [ 0.836121] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt [ 0.836124] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.836128] pcie_pme 0000:00:14.0:pcie01: service driver pcie_pme loaded [ 0.836132] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.836138] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.836163] efifb: probing for efifb [ 0.836173] efifb: framebuffer at 0x80000000, mapped to 0xffffc90001000000, using 8100k, total 8100k [ 0.836177] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.836179] efifb: scrolling: redraw [ 0.836181] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.839761] Console: switching to colour frame buffer device 240x67 [ 0.843285] fb0: EFI VGA frame buffer device [ 0.843303] intel_idle: does not run on family 6 model 92 [ 0.843355] ACPI: AC Adapter [ADP1] (off-line) [ 0.843405] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.843533] ACPI: Lid Switch [LID0] [ 0.843576] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.843600] ACPI: Power Button [PWRB] [ 0.843636] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.843657] ACPI: Power Button [PWRF] [ 0.843735] Monitor-Mwait will be used to enter C-1 state [ 0.843738] Monitor-Mwait will be used to enter C-2 state [ 0.843740] Monitor-Mwait will be used to enter C-3 state [ 0.846830] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.846848] ACPI: Thermal Zone [TZ01] (33 C) [ 0.846951] ACPI: Battery Slot [BAT0] (battery present) [ 0.846990] ACPI: Battery Slot [BAT1] (battery absent) [ 0.847033] GHES: HEST is not enabled! [ 0.847106] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.867195] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.868119] Linux agpgart interface v0.103 [ 0.869739] brd: module loaded [ 0.870425] loop: module loaded [ 0.870573] libphy: Fixed MDIO Bus: probed [ 0.870586] tun: Universal TUN/TAP device driver, 1.6 [ 0.870600] tun: (C) 1999-2004 Max Krasnyansky [ 0.870642] PPP generic driver version 2.4.2 [ 0.870688] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.870710] ehci-pci: EHCI PCI platform driver [ 0.870729] ehci-platform: EHCI generic platform driver [ 0.870750] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.870770] ohci-pci: OHCI PCI platform driver [ 0.870789] ohci-platform: OHCI generic platform driver [ 0.870808] uhci_hcd: USB Universal Host Controller Interface driver [ 0.870914] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 0.870934] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 0.871985] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.872010] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported [ 0.872055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.872074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.872094] usb usb1: Product: xHCI Host Controller [ 0.872109] usb usb1: Manufacturer: Linux 4.6.0-rc7-drm-intel-nightly-ww20-commit-5528ede+ xhci-hcd [ 0.872133] usb usb1: SerialNumber: 0000:00:15.0 [ 0.872215] hub 1-0:1.0: USB hub found [ 0.872235] hub 1-0:1.0: 8 ports detected [ 0.872677] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 0.872694] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 0.872733] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.873606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.874464] usb usb2: Product: xHCI Host Controller [ 0.875320] usb usb2: Manufacturer: Linux 4.6.0-rc7-drm-intel-nightly-ww20-commit-5528ede+ xhci-hcd [ 0.876196] usb usb2: SerialNumber: 0000:00:15.0 [ 0.877137] hub 2-0:1.0: USB hub found [ 0.878027] hub 2-0:1.0: 7 ports detected [ 0.879337] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.880521] i8042: Warning: Keylock active [ 0.882533] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.883425] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.884373] mousedev: PS/2 mouse device common for all mice [ 0.885353] rtc_cmos 00:05: RTC can wake from S4 [ 0.886341] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.887245] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.888124] i2c /dev entries driver [ 0.889025] device-mapper: uevent: version 1.0.3 [ 0.889944] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.890843] ledtrig-cpu: registered to indicate activity on CPUs [ 0.891724] EFI Variables Facility v0.08 2004-May-17 [ 0.895789] NET: Registered protocol family 10 [ 0.896775] NET: Registered protocol family 17 [ 0.897639] Key type dns_resolver registered [ 0.898617] microcode: CPU0 sig=0x506c9, pf=0x1, revision=0xc [ 0.899508] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.900474] registered taskstats version 1 [ 0.901353] Loading compiled-in X.509 certificates [ 0.904136] Loaded X.509 cert 'Build time autogenerated kernel key: 9b0bc9b979ab83d2ff908b9269dfdce8663adc52' [ 0.905031] zswap: loaded using pool lzo/zbud [ 0.907090] Key type trusted registered [ 0.910307] Key type encrypted registered [ 0.911148] AppArmor: AppArmor sha1 policy hashing enabled [ 0.911982] ima: No TPM chip found, activating TPM-bypass! [ 0.912824] evm: HMAC attrs: 0x1 [ 0.914023] Magic number: 2:78:99 [ 0.914912] rtc_cmos 00:05: setting system clock to 2098-01-02 23:05:30 UTC (4039542330) [ 0.915896] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.916752] EDD information not available. [ 0.917646] PM: Hibernation image not present or could not be loaded. [ 0.918585] Freeing unused kernel memory: 1504K (ffffffff81d56000 - ffffffff81ece000) [ 0.919467] Write protecting the kernel read-only data: 12288k [ 0.920407] Freeing unused kernel memory: 28K (ffff8800017f9000 - ffff880001800000) [ 0.921929] Freeing unused kernel memory: 408K (ffff880001b9a000 - ffff880001c00000) [ 0.932074] random: udevadm urandom read with 7 bits of entropy available [ 0.940718] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 0.951016] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 0.956339] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 0.961227] usb 2-2: New USB device found, idVendor=8564, idProduct=4000 [ 0.962105] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.962975] usb 2-2: Product: USB3.0 Hub [ 0.963839] usb 2-2: Manufacturer: Transcend [ 0.973072] hub 2-2:1.0: USB hub found [ 0.974841] hub 2-2:1.0: 4 ports detected [ 1.000976] hidraw: raw HID events driver (C) Jiri Kosina [ 1.003662] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 1.004567] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.008134] usb 1-2: New USB device found, idVendor=8564, idProduct=4000 [ 1.009015] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.009889] usb 1-2: Product: USB2.0 Hub [ 1.010754] usb 1-2: Manufacturer: Transcend [ 1.013988] hub 1-2:1.0: USB hub found [ 1.015292] hub 1-2:1.0: 4 ports detected [ 1.025131] pps_core: LinuxPPS API ver. 1 registered [ 1.025997] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.027992] ahci 0000:00:12.0: version 3.0 [ 1.031685] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.032559] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst [ 1.034741] sdhci: Secure Digital Host Controller Interface driver [ 1.035629] sdhci: Copyright(c) Pierre Ossman [ 1.039803] PTP clock support registered [ 1.042807] [drm] Initialized drm 1.1.0 20060810 [ 1.046904] dca service started, version 1.12.1 [ 1.047781] scsi host0: ahci [ 1.048668] ata1: SATA max UDMA/133 abar m2048@0x9232e000 port 0x9232e100 irq 123 [ 1.053561] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev a) [ 1.054506] sdhci-pci 0000:00:1b.0: failed to setup card detect gpio [ 1.062234] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.063127] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.064011] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.072847] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit [ 1.076663] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev a) [ 1.080956] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3ff6e14ce08, max_idle_ns: 440795265855 ns [ 1.104083] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit [ 1.105813] pps pps0: new PPS source ptp0 [ 1.110674] igb 0000:01:00.0: added PHC on eth0 [ 1.111576] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.112472] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:49:fa:01:93:40 [ 1.113366] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 1.114262] igb 0000:01:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) [ 1.115271] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev a) [ 1.118296] usb 1-4: New USB device found, idVendor=0b95, idProduct=7720 [ 1.119205] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.120114] usb 1-4: Product: AX88772 [ 1.121011] usb 1-4: SerialNumber: 00D91E [ 1.124978] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd [ 1.155675] usb 1-2.1: New USB device found, idVendor=03f0, idProduct=0024 [ 1.156561] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.157466] usb 1-2.1: Product: HP Basic USB Keyboard [ 1.158349] usb 1-2.1: Manufacturer: CHICONY [ 1.173460] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit [ 1.177168] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.182554] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 1.183475] ata1.00: ATA-9: INTEL SSDSC2BW080A4, DC32, max UDMA/133 [ 1.184367] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.198606] ata1.00: configured for UDMA/133 [ 1.201568] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW08 DC32 PQ: 0 ANSI: 5 [ 1.214796] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.218720] sd 0:0:0:0: [sda] Write Protect is off [ 1.221604] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.223700] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.225673] Setting dangerous option enable_guc_submission - tainting kernel [ 1.226808] Setting dangerous option preliminary_hw_support - tainting kernel [ 1.227725] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a [ 1.228612] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.231609] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.245118] usb 1-2.2: new low-speed USB device number 6 using xhci_hcd [ 1.248927] Setting dangerous option enable_rc6 - tainting kernel [ 1.252325] mmc1: new HS400 MMC card at address 0001 [ 1.255358] sda: sda1 sda2 sda3 [ 1.262604] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.274952] [drm:intel_detect_pch] No PCH found. [ 1.274954] [drm:get_allowed_dc_mask] Allowed DC state mask 09 [ 1.274964] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x5a84 rev=0x0a flags=need_gfx_hws,is_broxton,is_preliminary,has_fbc,has_hotplug,has_ddi,has_fpga_dbg, [ 1.275043] [drm:intel_device_info_runtime_init] slice total: 1 [ 1.275044] [drm:intel_device_info_runtime_init] subslice total: 3 [ 1.275045] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 1.275046] [drm:intel_device_info_runtime_init] EU total: 18 [ 1.275046] [drm:intel_device_info_runtime_init] EU per subslice: 6 [ 1.275047] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.275048] [drm:intel_device_info_runtime_init] has subslice power gating: y [ 1.275049] [drm:intel_device_info_runtime_init] has EU power gating: y [ 1.275049] [drm:intel_device_info_runtime_init] ppgtt mode: 3 [ 1.275062] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 1.275063] [drm] Memory usable by graphics device = 4096M [ 1.276000] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 1.276001] [drm:i915_ggtt_init_hw] GTT stolen size = 64M [ 1.276207] checking generic (80000000 7e9000) vs hw (80000000 10000000) [ 1.276208] fb: switching to inteldrmfb from EFI VGA [ 1.279401] Console: switching to colour dummy device 80x25 [ 1.279465] [drm] Replacing VGA console driver [ 1.279556] [drm:intel_opregion_setup] graphic opregion physical addr: 0x79e17018 [ 1.279559] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.279560] [drm:intel_opregion_setup] ASLE supported [ 1.279563] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA) [ 1.279584] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.279587] [drm] Driver supports precise vblank timestamp query. [ 1.279589] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 1.279590] [drm:intel_bios_init] VBT signature "$VBT BROXTON ", BDB version 207 [ 1.279592] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [ 1.279593] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.279594] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [ 1.279595] [drm:parse_lfp_panel_data] Panel type: 2 (VBT) [ 1.279596] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 1.279597] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.279599] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.279599] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 1.279601] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 180 [ 1.279602] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 1.279602] [drm:parse_device_mapping] Expected child device config size for VBT version 207 not known; assuming 38 [ 1.279604] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.279605] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.279606] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.279607] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.279608] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8 [ 1.279609] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.279610] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8 [ 1.279632] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.279636] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.279637] [drm:intel_power_well_enable] enabling power well 1 [ 1.279640] [drm:broxton_init_cdclk] CDCLK already enabled, won't reprogram it [ 1.279641] [drm:broxton_phy_init] DDI PHY 1 not enabled, enabling it [ 1.280339] [drm:__phy_reg_verify_state] DDI PHY 0 reg BXT_PORT_TX_DW14_LN(2, 0) [0006c938] state mismatch: current 00000000, expected 40000000 (mask 40000000) [ 1.280342] [drm:__phy_reg_verify_state] DDI PHY 0 reg BXT_PORT_TX_DW14_LN(2, 2) [0006cb38] state mismatch: current 00000000, expected 40000000 (mask 40000000) [ 1.280345] [drm:__phy_reg_verify_state] DDI PHY 0 reg BXT_PORT_TX_DW14_LN(2, 3) [0006cbb8] state mismatch: current 00000000, expected 40000000 (mask 40000000) [ 1.280348] [drm:broxton_phy_init] DDI PHY 0 enabled with invalid state, force reprogramming it [ 1.280372] [drm:intel_power_well_enable] enabling always-on [ 1.280372] [drm:intel_power_well_enable] enabling DC off [ 1.280374] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.280388] [drm:intel_power_well_enable] enabling power well 2 [ 1.280390] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.280403] [drm:intel_csr_ucode_init] Loading i915/bxt_dmc_ver1.bin [ 1.280509] [drm] Finished loading i915/bxt_dmc_ver1.bin (v1.7) [ 1.284089] usb 1-2.2: New USB device found, idVendor=045e, idProduct=0040 [ 1.284094] usb 1-2.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 1.284098] usb 1-2.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 1.284100] usb 1-2.2: Manufacturer: Microsoft [ 1.284676] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 9 (9.0 usec) [ 1.284678] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 9 (9.0 usec) [ 1.284679] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 10 (10.0 usec) [ 1.284680] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 24 (24.0 usec) [ 1.284681] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 24 (24.0 usec) [ 1.284682] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 24 (24.0 usec) [ 1.284683] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 24 (24.0 usec) [ 1.284684] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 24 (24.0 usec) [ 1.284685] [drm:intel_modeset_init] 3 display pipes available. [ 1.284698] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz [ 1.284699] [drm:intel_update_max_cdclk] Max CD clock rate: 624000 kHz [ 1.284700] [drm:intel_update_max_cdclk] Max dotclock rate: 624000 kHz [ 1.284703] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.285009] [drm:intel_ddi_init] BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing [ 1.285010] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.285041] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 5000 [ 1.285042] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.285043] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 1.285044] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.285045] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.285083] [drm:intel_edp_panel_vdd_sanitize] VDD left on by BIOS, adjusting state tracking [ 1.285411] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.286120] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1.286406] [drm:intel_dp_get_dpcd] EDP DPCD : 02 fb c7 [ 1.286408] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.286410] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.286411] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.286412] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.286414] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 [ 1.297229] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.297232] [drm:intel_dp_drrs_init] Downclock mode is not found. DRRS not supported [ 1.297233] [drm:get_backlight_max_vbt] VBT defined backlight frequency 200 Hz [ 1.297235] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, disabled, brightness 0/96000 [ 1.297243] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.297271] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.297338] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.297357] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 1.297412] [drm:intel_dsi_init] [ 1.297424] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled [ 1.297426] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: disabled [ 1.297427] [drm:intel_modeset_readout_hw_state] [CRTC:36] hw state readout: disabled [ 1.297429] [drm:intel_modeset_readout_hw_state] PORT PLL A hw state readout: crtc_mask 0x00000000, on 0 [ 1.297434] [drm:intel_modeset_readout_hw_state] PORT PLL B hw state readout: crtc_mask 0x00000001, on 1 [ 1.297435] [drm:intel_modeset_readout_hw_state] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0 [ 1.297436] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: disabled, pipe A [ 1.297439] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: enabled, pipe A [ 1.297440] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe A [ 1.297441] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP MST-49] hw state readout: disabled, pipe B [ 1.297442] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP MST-50] hw state readout: disabled, pipe C [ 1.297443] [drm:intel_modeset_readout_hw_state] [ENCODER:53:TMDS-53] hw state readout: disabled, pipe A [ 1.297444] [drm:intel_modeset_readout_hw_state] [ENCODER:55:DP MST-55] hw state readout: disabled, pipe A [ 1.297445] [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP MST-56] hw state readout: disabled, pipe B [ 1.297446] [drm:intel_modeset_readout_hw_state] [ENCODER:57:DP MST-57] hw state readout: disabled, pipe C [ 1.297447] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:eDP-1] hw state readout: disabled [ 1.297449] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DP-1] hw state readout: enabled [ 1.297450] [drm:intel_modeset_readout_hw_state] [CONNECTOR:51:HDMI-A-1] hw state readout: disabled [ 1.297451] [drm:intel_modeset_readout_hw_state] [CONNECTOR:54:DP-2] hw state readout: disabled [ 1.297452] [drm:intel_modeset_readout_hw_state] [CONNECTOR:58:HDMI-A-2] hw state readout: disabled [ 1.297462] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff880270d67000 for pipe A [ 1.297463] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.297464] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.297465] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.297466] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1730150, gmch_n: 8388608, link_m: 144179, link_n: 524288, tu: 64 [ 1.297467] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.297468] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.297469] [drm:intel_dump_pipe_config] requested mode: [ 1.297470] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148499 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.297471] [drm:intel_dump_pipe_config] adjusted mode: [ 1.297472] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148499 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.297474] [drm:intel_dump_crtc_timings] crtc timings: 148499 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5 [ 1.297475] [drm:intel_dump_pipe_config] port clock: 540000 [ 1.297475] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.297476] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 1.297477] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.297478] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.297479] [drm:intel_dump_pipe_config] ips: 0 [ 1.297480] [drm:intel_dump_pipe_config] double wide: 0 [ 1.297481] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x4100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x58 [ 1.297482] [drm:intel_dump_pipe_config] planes on this crtc [ 1.297483] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1.297484] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1.297485] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1.297486] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = -1 [ 1.297487] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff880270e60800 for pipe B [ 1.297488] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.297489] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.297490] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.297491] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.297492] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.297493] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.297493] [drm:intel_dump_pipe_config] requested mode: [ 1.297495] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.297495] [drm:intel_dump_pipe_config] adjusted mode: [ 1.297497] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.297498] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.297498] [drm:intel_dump_pipe_config] port clock: 0 [ 1.297499] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.297500] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1.297501] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.297502] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.297503] [drm:intel_dump_pipe_config] ips: 0 [ 1.297503] [drm:intel_dump_pipe_config] double wide: 0 [ 1.297505] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.297505] [drm:intel_dump_pipe_config] planes on this crtc [ 1.297506] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = -1 [ 1.297507] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = -1 [ 1.297508] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = -1 [ 1.297509] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = -1 [ 1.297511] [drm:intel_dump_pipe_config] [CRTC:36][setup_hw_state] config ffff880270e67000 for pipe C [ 1.297511] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.297512] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.297513] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.297514] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.297515] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.297516] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.297517] [drm:intel_dump_pipe_config] requested mode: [ 1.297518] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.297518] [drm:intel_dump_pipe_config] adjusted mode: [ 1.297520] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.297521] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.297522] [drm:intel_dump_pipe_config] port clock: 0 [ 1.297522] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.297523] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1.297524] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.297525] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.297526] [drm:intel_dump_pipe_config] ips: 0 [ 1.297526] [drm:intel_dump_pipe_config] double wide: 0 [ 1.297528] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.297528] [drm:intel_dump_pipe_config] planes on this crtc [ 1.297529] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = -1 [ 1.297530] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = -1 [ 1.297532] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = -1 [ 1.297548] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.297549] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.297552] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.297554] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880270f98000 [ 1.297555] [drm:intel_guc_ucode_init] GuC firmware pending, path i915/bxt_guc_ver8_7.bin [ 1.297556] [drm:guc_fw_fetch] before requesting firmware: GuC fw fetch status PENDING [ 1.297591] [drm:guc_fw_fetch] fetch GuC fw from i915/bxt_guc_ver8_7.bin succeeded, fw ffff88027084b080 [ 1.297592] [drm:guc_fw_fetch] firmware version 8.7 OK (minimum 8.7) [ 1.297625] [drm:guc_fw_fetch] GuC fw fetch status SUCCESS, obj ffff880270f98240 [ 1.297702] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.297703] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.297720] [drm:i915_gem_context_init] LR context support initialized [ 1.297727] [drm:intel_init_pipe_control] render ring pipe control offset: 0x007ea000 [ 1.297732] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.297733] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=16384 [ 1.297756] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.297757] [drm:i915_pages_create_for_stolen] offset=0x7ed000, size=16384 [ 1.297764] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.297765] [drm:i915_pages_create_for_stolen] offset=0x7f1000, size=16384 [ 1.297772] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.297773] [drm:i915_pages_create_for_stolen] offset=0x7f5000, size=16384 [ 1.297781] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 1.297801] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 1.297819] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 1.297837] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 1.297854] [drm:intel_guc_ucode_load] GuC fw status: fetch SUCCESS, load NONE [ 1.297856] [drm:intel_guc_ucode_load] GuC fw fetch status SUCCESS [ 1.323721] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x400000f2 [ 1.323723] [drm:guc_ucode_xfer_dma] returning -110 [ 1.323725] [drm] GuC fw load failed, err -110; will reset and retry 2 more time(s) [ 1.328251] igb 0000:01:00.0 enp1s0: renamed from eth0 [ 1.328990] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large: [ 1.328995] clocksource: 'hpet' wd_now: 64b3646 wd_last: 5b9d71d mask: ffffffff [ 1.328998] clocksource: 'tsc' cs_now: a49495555 cs_last: a28eb25aa mask: ffffffffffffffff [ 1.341867] usbcore: registered new interface driver usbhid [ 1.341871] usbhid: USB HID core driver [ 1.349892] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x400000f2 [ 1.349894] [drm:guc_ucode_xfer_dma] returning -110 [ 1.349895] [drm] GuC fw load failed, err -110; will reset and retry 1 more time(s) [ 1.375199] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:03F0:0024.0001/input/input6 [ 1.376646] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x400000f2 [ 1.376649] [drm:guc_ucode_xfer_dma] returning -110 [ 1.376673] [drm:intel_guc_ucode_load [i915]] *ERROR* GuC firmware load failed, err -110 [ 1.376726] [drm:i915_gem_init_hw [i915]] *ERROR* Failed to initialize GuC, error -110 [ 1.376747] [drm:i915_gem_init [i915]] *ERROR* Failed to initialize GPU, declaring it wedged [ 1.376755] [drm] RC6 disabled, disabling runtime PM support [ 1.376758] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz [ 1.376784] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.376786] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 1.376787] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 1.376787] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 1.376788] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 1.376790] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400 [ 1.376791] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400) [ 1.376791] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 1.376792] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 1.376793] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 1.376796] [drm:bxt_hpd_irq_setup] Invert bit setting: hp_ctl:18001919 hp_port:38 [ 1.376801] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.376802] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.376901] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.376978] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.377094] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] status updated from unknown to connected [ 1.377101] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.377103] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.377105] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.377106] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.377107] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.377211] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.377295] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.377297] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.377298] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.377299] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.377317] mmcblk1: mmc1:0001 CGND3R 58.2 GiB [ 1.377494] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.377602] [drm:drm_dp_i2c_do_msg] native defer [ 1.378121] mmcblk1boot0: mmc1:0001 CGND3R partition 1 4.00 MiB [ 1.378208] mmcblk1boot1: mmc1:0001 CGND3R partition 2 4.00 MiB [ 1.378283] mmcblk1rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB [ 1.379810] [drm:drm_dp_i2c_do_msg] native defer [ 1.381951] [drm:drm_dp_i2c_do_msg] native defer [ 1.382479] [drm:drm_dp_i2c_do_msg] native defer [ 1.383238] [drm:drm_dp_i2c_do_msg] native defer [ 1.383995] [drm:drm_dp_i2c_do_msg] native defer [ 1.384548] [drm:drm_dp_i2c_do_msg] native defer [ 1.385312] [drm:drm_dp_i2c_do_msg] native defer [ 1.386083] [drm:drm_dp_i2c_do_msg] native defer [ 1.386881] [drm:drm_dp_i2c_do_msg] native defer [ 1.387660] [drm:drm_dp_i2c_do_msg] native defer [ 1.388405] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:15.0-2.1/input0 [ 1.388495] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:045E:0040.0002/input/input7 [ 1.388522] [drm:drm_dp_i2c_do_msg] native defer [ 1.388562] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:15.0-2.2/input0 [ 1.389321] [drm:drm_dp_i2c_do_msg] native defer [ 1.390112] [drm:drm_dp_i2c_do_msg] native defer [ 1.390906] [drm:drm_dp_i2c_do_msg] native defer [ 1.391241] [drm:drm_dp_i2c_do_msg] native defer [ 1.392040] [drm:drm_dp_i2c_do_msg] native defer [ 1.392805] [drm:drm_dp_i2c_do_msg] native defer [ 1.393572] [drm:drm_dp_i2c_do_msg] native defer [ 1.394339] [drm:drm_dp_i2c_do_msg] native defer [ 1.395103] [drm:drm_dp_i2c_do_msg] native defer [ 1.395900] [drm:drm_dp_i2c_do_msg] native defer [ 1.396696] [drm:drm_dp_i2c_do_msg] native defer [ 1.397486] [drm:drm_dp_i2c_do_msg] native defer [ 1.398285] [drm:drm_dp_i2c_do_msg] native defer [ 1.399082] [drm:drm_dp_i2c_do_msg] native defer [ 1.399878] [drm:drm_dp_i2c_do_msg] native defer [ 1.400676] [drm:drm_dp_i2c_do_msg] native defer [ 1.401470] [drm:drm_dp_i2c_do_msg] native defer [ 1.402124] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 1.402252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] status updated from unknown to connected [ 1.402286] [drm:drm_edid_to_eld] ELD monitor VX279 [ 1.402288] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.402289] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 1.402301] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.402303] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.402304] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.402306] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.402307] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.402309] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.402310] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.402312] [drm:drm_mode_debug_printmodeline] Modeline 73:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.402313] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.402314] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.402316] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.402318] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.402319] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.402320] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.402322] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.402323] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.402325] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.402326] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.402328] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1.402329] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.402331] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.402332] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1.402333] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.402335] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.402336] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.402338] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.402339] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.402340] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.402342] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 1.402343] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.402345] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.402346] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.402347] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.402348] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.402399] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.402401] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.402439] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.402440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.402479] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.402480] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.402518] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.402520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] status updated from unknown to disconnected [ 1.402521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.402522] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.402523] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.402743] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 00 00 01 00 02 02 06 00 00 00 00 [ 1.402817] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.402819] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.402820] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.402821] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.404943] [drm:drm_dp_dpcd_access] too many retries, giving up [ 1.404945] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] status updated from unknown to connected [ 1.404950] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.404953] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.404955] [drm:drm_mode_debug_printmodeline] Modeline 80:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.404956] [drm:drm_mode_debug_printmodeline] Modeline 93:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.404958] [drm:drm_mode_debug_printmodeline] Modeline 89:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.404959] [drm:drm_mode_debug_printmodeline] Modeline 90:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.404961] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.404962] [drm:drm_mode_debug_printmodeline] Modeline 88:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 1.404964] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.404965] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.404966] [drm:drm_mode_debug_printmodeline] Modeline 95:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.404968] [drm:drm_mode_debug_printmodeline] Modeline 98:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.404969] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.404970] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.405010] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.405011] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.405049] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.405051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.405089] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.405090] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.405129] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.405130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] status updated from unknown to disconnected [ 1.405131] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.405133] [drm:drm_setup_crtcs] [ 1.405134] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.405135] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.405136] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.405136] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.405137] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.405138] [drm:intel_fb_initial_config] connector eDP-1 has no encoder or crtc, skipping [ 1.405140] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.405140] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.405142] [drm:intel_fb_initial_config] connector DP-1 on pipe A [CRTC:26]: 1920x1080 [ 1.405142] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.405143] [drm:intel_fb_initial_config] connector DP-2 has no encoder or crtc, skipping [ 1.405144] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.405145] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 1.405145] [drm:intel_fb_initial_config] Enabled: 1, detected: 3 [ 1.405146] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.405147] [drm:drm_target_preferred] looking for cmdline mode on connector 39 [ 1.405148] [drm:drm_target_preferred] looking for preferred mode on connector 39 0 [ 1.405149] [drm:drm_target_preferred] found mode 1920x1080 [ 1.405149] [drm:drm_target_preferred] looking for cmdline mode on connector 47 [ 1.405150] [drm:drm_target_preferred] looking for preferred mode on connector 47 0 [ 1.405151] [drm:drm_target_preferred] found mode 1920x1080 [ 1.405152] [drm:drm_target_preferred] looking for cmdline mode on connector 54 [ 1.405152] [drm:drm_target_preferred] looking for preferred mode on connector 54 0 [ 1.405153] [drm:drm_target_preferred] found mode 1920x1200 [ 1.405154] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.405158] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.405159] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 1.405160] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 36 (0,0) [ 1.405161] [drm:intelfb_create] re-using BIOS fb [ 1.405165] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff880270f98000 [ 1.405202] fbcon: inteldrmfb (fb0) is primary device [ 1.405253] Console: switching to colour frame buffer device 240x67 [ 1.411815] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.411842] [drm:drm_fb_helper_hotplug_event] [ 1.411843] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.411844] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.411922] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.411999] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.412084] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.412086] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.412088] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.412089] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.412090] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.412164] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 1.412194] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.412269] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.412271] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.412272] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.412273] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.412451] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.412569] [drm:drm_edid_to_eld] ELD monitor VX279 [ 1.412571] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.412572] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 1.412584] [drm:drm_mode_debug_printmodeline] Modeline 73:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.412585] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 1.412588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.412589] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.412591] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.412592] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.412594] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.412595] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.412596] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.412598] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.412600] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.412601] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.412602] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.412604] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.412605] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.412607] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.412608] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.412610] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.412611] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.412613] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1.412614] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.412615] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.412617] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1.412618] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.412620] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.412621] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.412622] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.412624] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.412625] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.412627] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 1.412628] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.412630] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.412631] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.412632] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.412633] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.412671] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.412673] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.412710] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.412711] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.412750] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.412751] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.412788] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.412789] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.412790] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.412791] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.412892] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 00 00 01 00 02 02 06 00 00 00 00 [ 1.412963] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.412965] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.412966] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.412967] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.413054] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.413058] [drm:drm_mode_debug_printmodeline] Modeline 80:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.413059] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y [ 1.413060] [drm:drm_mode_debug_printmodeline] Modeline 89:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.413061] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 1.413062] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.413064] [drm:drm_mode_debug_printmodeline] Modeline 93:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.413065] [drm:drm_mode_debug_printmodeline] Modeline 90:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.413067] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.413068] [drm:drm_mode_debug_printmodeline] Modeline 88:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 1.413070] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.413071] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.413072] [drm:drm_mode_debug_printmodeline] Modeline 95:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.413074] [drm:drm_mode_debug_printmodeline] Modeline 98:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.413075] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.413076] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.413114] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.413115] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.413153] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.413154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.413191] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.413192] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.413229] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.413230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.413232] [drm:drm_setup_crtcs] [ 1.413233] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.413234] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.413235] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.413236] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.413237] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.413238] [drm:intel_fb_initial_config] connector eDP-1 has no encoder or crtc, skipping [ 1.413239] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.413240] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.413241] [drm:intel_fb_initial_config] connector DP-1 on pipe A [CRTC:26]: 1920x1080 [ 1.413242] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.413243] [drm:intel_fb_initial_config] connector DP-2 has no encoder or crtc, skipping [ 1.413243] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.413244] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 1.413245] [drm:intel_fb_initial_config] Enabled: 1, detected: 3 [ 1.413245] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.413247] [drm:drm_target_preferred] looking for cmdline mode on connector 39 [ 1.413247] [drm:drm_target_preferred] looking for preferred mode on connector 39 0 [ 1.413248] [drm:drm_target_preferred] found mode 1920x1080 [ 1.413249] [drm:drm_target_preferred] looking for cmdline mode on connector 47 [ 1.413250] [drm:drm_target_preferred] looking for preferred mode on connector 47 0 [ 1.413250] [drm:drm_target_preferred] found mode 1920x1080 [ 1.413251] [drm:drm_target_preferred] looking for cmdline mode on connector 54 [ 1.413252] [drm:drm_target_preferred] looking for preferred mode on connector 54 0 [ 1.413253] [drm:drm_target_preferred] found mode 1920x1080 [ 1.413253] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.413258] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.413259] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 1.413260] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 1.413273] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 1.413274] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.413276] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1.413277] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.413278] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 1.413280] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 1.413281] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 1.413282] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.413284] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880270f63000 for pipe A [ 1.413285] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1.413285] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.413286] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.413288] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 1.413289] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.413290] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.413290] [drm:intel_dump_pipe_config] requested mode: [ 1.413292] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.413292] [drm:intel_dump_pipe_config] adjusted mode: [ 1.413294] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.413295] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 1.413296] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.413297] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.413298] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1.413298] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.413299] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.413300] [drm:intel_dump_pipe_config] ips: 0 [ 1.413301] [drm:intel_dump_pipe_config] double wide: 0 [ 1.413302] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x4100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x58 [ 1.413303] [drm:intel_dump_pipe_config] planes on this crtc [ 1.413304] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 1.413305] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = 0x34325258 [ 1.413307] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 1.413308] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1.413309] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1.413310] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = -1 [ 1.413311] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 1.413312] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.413313] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 148500KHz [ 1.413314] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1.413315] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1.413316] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.413317] [drm:intel_dump_pipe_config] [CRTC:31][modeset] config ffff880270f63800 for pipe B [ 1.413318] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.413319] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.413320] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.413321] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1.413322] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.413323] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1.413323] [drm:intel_dump_pipe_config] requested mode: [ 1.413325] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.413325] [drm:intel_dump_pipe_config] adjusted mode: [ 1.413327] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.413328] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1.413329] [drm:intel_dump_pipe_config] port clock: 162000 [ 1.413330] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.413330] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1.413331] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.413332] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.413333] [drm:intel_dump_pipe_config] ips: 0 [ 1.413334] [drm:intel_dump_pipe_config] double wide: 0 [ 1.413335] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.413336] [drm:intel_dump_pipe_config] planes on this crtc [ 1.413337] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = -1 [ 1.413338] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = -1 [ 1.413339] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = -1 [ 1.413340] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = -1 [ 1.413341] [drm:connected_sink_compute_bpp] [CONNECTOR:54:DP-2] checking for sink bpp constrains [ 1.413342] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.413343] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1.413345] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1.413345] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1.413346] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.413348] [drm:intel_dump_pipe_config] [CRTC:36][modeset] config ffff880270f64000 for pipe C [ 1.413348] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.413349] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.413350] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.413351] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1.413352] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.413353] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.413354] [drm:intel_dump_pipe_config] requested mode: [ 1.413355] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.413356] [drm:intel_dump_pipe_config] adjusted mode: [ 1.413357] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.413358] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0xa [ 1.413359] [drm:intel_dump_pipe_config] port clock: 162000 [ 1.413360] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.413361] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1.413362] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.413363] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.413363] [drm:intel_dump_pipe_config] ips: 0 [ 1.413364] [drm:intel_dump_pipe_config] double wide: 0 [ 1.413365] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.413366] [drm:intel_dump_pipe_config] planes on this crtc [ 1.413367] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = -1 [ 1.413368] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = -1 [ 1.413369] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = -1 [ 1.413371] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 1.413373] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1.413374] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 1.413375] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 1.413377] [drm:bxt_get_dpll] CRTC:26 using pre-allocated PORT PLL A [ 1.413378] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 1.413379] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1.413380] [drm:bxt_get_dpll] CRTC:31 using pre-allocated PORT PLL B [ 1.413381] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B [ 1.413381] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31] scaler_user index 1.31 [ 1.413382] [drm:skl_update_scaler] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.413383] [drm:bxt_get_dpll] CRTC:36 using pre-allocated PORT PLL C [ 1.413384] [drm:intel_reference_shared_dpll] using PORT PLL C for pipe C [ 1.413385] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:36] scaler_user index 2.31 [ 1.413386] [drm:skl_update_scaler] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.413737] [drm:intel_disable_pipe] disabling pipe A [ 1.413828] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.414010] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 1.414079] [drm] Initialized i915 1.6.0 20160508 for 0000:00:02.0 on minor 0 [ 1.419755] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 1, on? 1) for crtc 26 [ 1.419763] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 1.428177] [drm:intel_update_cdclk] Current CD clock rate: 288000 kHz [ 1.428179] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 1.428180] [drm:verify_encoder_state] [ENCODER:46:TMDS-46] [ 1.428181] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1.428182] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1.428183] [drm:verify_encoder_state] [ENCODER:50:DP MST-50] [ 1.428183] [drm:verify_encoder_state] [ENCODER:53:TMDS-53] [ 1.428184] [drm:verify_encoder_state] [ENCODER:55:DP MST-55] [ 1.428185] [drm:verify_encoder_state] [ENCODER:56:DP MST-56] [ 1.428186] [drm:verify_encoder_state] [ENCODER:57:DP MST-57] [ 1.428187] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 1.428189] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 1.428190] [drm:verify_single_dpll_state] PORT PLL A [ 1.428191] [drm:verify_single_dpll_state] PORT PLL B [ 1.428192] [drm:verify_single_dpll_state] PORT PLL C [ 1.428194] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 1.428195] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 1.428217] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.428218] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.428221] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 0000006a [ 1.428221] [drm:wait_panel_status] Wait complete [ 1.428222] [drm:wait_panel_on] Wait for panel power on [ 1.428224] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control 0000006b [ 1.431737] mmcblk1: p1 p2 p3 p4 [ 1.468972] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.481484] [drm:wait_panel_status] Wait complete [ 1.482205] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.482206] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.482427] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.482955] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.482995] [drm:skylake_pfit_enable] for crtc_state = ffff880270f63000 [ 1.483041] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.483044] [drm:intel_enable_pipe] enabling pipe A [ 1.483059] [drm:intel_edp_backlight_on] [ 1.483061] [drm:intel_panel_enable_backlight] pipe A [ 1.483062] [drm:intel_panel_actually_set_backlight] set backlight PWM = 96000 [ 1.484798] [drm:intel_psr_enable] PSR not supported on this platform [ 1.484800] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1.484827] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 2, on? 0) for crtc 31 [ 1.484828] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 1.485670] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.485672] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.487973] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.491755] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.491800] [drm:skylake_pfit_enable] for crtc_state = ffff880270f63800 [ 1.491851] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.491853] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1.491855] [drm:intel_enable_pipe] enabling pipe B [ 1.491872] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:TMDS-46] [ 1.491873] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 28 bytes ELD [ 1.491890] [drm:intel_enable_shared_dpll] enable PORT PLL C (active 4, on? 0) for crtc 36 [ 1.491890] [drm:intel_enable_shared_dpll] enabling PORT PLL C [ 1.492625] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.492626] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.492863] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.494451] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.494529] [drm:skylake_pfit_enable] for crtc_state = ffff880270f64000 [ 1.494580] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.494582] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1.494584] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 1.494588] [drm:intel_enable_pipe] enabling pipe C [ 1.498748] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 1.498753] [drm:verify_crtc_state] [CRTC:26] [ 1.498766] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 1.498769] [drm:verify_single_dpll_state] PORT PLL A [ 1.498776] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 1.498778] [drm:verify_crtc_state] [CRTC:31] [ 1.498785] [drm:verify_single_dpll_state] PORT PLL B [ 1.498791] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 1.498792] [drm:verify_crtc_state] [CRTC:36] [ 1.498802] [drm:verify_single_dpll_state] PORT PLL C [ 1.498817] [drm:drm_fb_helper_hotplug_event] [ 1.498818] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.498819] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.498902] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.498977] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.499082] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.499085] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.499087] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.499088] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.499089] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.499197] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.499272] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.499274] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.499275] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.499276] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.499466] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.499584] [drm:drm_edid_to_eld] ELD monitor VX279 [ 1.499586] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.499587] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 1.499600] [drm:drm_mode_debug_printmodeline] Modeline 117:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.499601] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 1.499610] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.499612] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.499613] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.499614] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.499616] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.499617] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.499619] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.499620] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.499622] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.499623] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.499625] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.499626] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.499628] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.499629] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.499631] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.499632] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.499633] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.499635] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1.499636] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.499638] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.499639] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1.499641] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.499642] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.499643] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.499645] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.499646] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.499648] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.499649] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 1.499650] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.499652] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.499653] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.499655] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.499656] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.499694] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.499695] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.499730] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.499731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.499768] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.499769] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.499810] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.499812] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.499813] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.499814] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.499918] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 00 00 01 00 02 02 06 00 00 00 00 [ 1.499999] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.500001] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.500002] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.500003] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.500098] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.500101] [drm:drm_mode_debug_printmodeline] Modeline 41:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.500102] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y [ 1.500104] [drm:drm_mode_debug_printmodeline] Modeline 110:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.500104] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 1.500106] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.500107] [drm:drm_mode_debug_printmodeline] Modeline 93:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.500108] [drm:drm_mode_debug_printmodeline] Modeline 90:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.500110] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.500111] [drm:drm_mode_debug_printmodeline] Modeline 88:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 1.500113] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.500114] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.500116] [drm:drm_mode_debug_printmodeline] Modeline 95:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.500117] [drm:drm_mode_debug_printmodeline] Modeline 98:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.500118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.500119] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.500158] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.500159] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.500195] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.500197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.500235] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.500237] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.500276] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.500277] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.500280] [drm:drm_setup_crtcs] [ 1.500281] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.500282] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.500282] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.500283] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.500284] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.500286] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.500287] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.500288] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080 [ 1.500289] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.500290] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.500291] [drm:intel_fb_initial_config] connector DP-1 on pipe B [CRTC:31]: 1920x1080 [ 1.500292] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.500293] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 1.500293] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 1.500294] [drm:intel_fb_initial_config] using first mode listed on connector DP-2 [ 1.500295] [drm:intel_fb_initial_config] connector DP-2 on pipe C [CRTC:36]: 1920x1080 [ 1.500296] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.500297] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.500299] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 1.500300] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 1.500313] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1.500315] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 1.500316] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 1.506622] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 1.540153] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 1.540300] systemd[1]: Detected architecture x86-64. [ 1.540585] systemd[1]: Set hostname to . [ 1.585949] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.586118] systemd[1]: Reached target Encrypted Volumes. [ 1.586221] systemd[1]: Reached target Remote File Systems (Pre). [ 1.586334] systemd[1]: Created slice Root Slice. [ 1.586450] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.586560] systemd[1]: Listening on fsck to fsckd communication Socket. [ 1.586682] systemd[1]: Listening on udev Control Socket. [ 1.586836] systemd[1]: Created slice System Slice. [ 1.587002] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 1.589067] systemd[1]: Starting Increase datagram queue length... [ 1.591921] systemd[1]: Created slice system-getty.slice. [ 1.595875] systemd[1]: Listening on Journal Audit Socket. [ 1.599131] systemd[1]: Listening on udev Kernel Socket. [ 1.601860] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.604276] systemd[1]: Created slice User and Session Slice. [ 1.606602] systemd[1]: Reached target Slices. [ 1.608993] systemd[1]: Listening on Journal Socket. [ 1.611744] systemd[1]: Mounting Huge Pages File System... [ 1.614677] systemd[1]: Starting Setup Virtual Console... [ 1.618933] systemd[1]: Mounting POSIX Message Queue File System... [ 1.624630] systemd[1]: Mounting Debug File System... [ 1.629486] systemd[1]: Starting Load Kernel Modules... [ 1.635867] systemd[1]: Starting Uncomplicated firewall... [ 1.639673] systemd[1]: Started Braille Device Support. [ 1.646552] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.647777] lp: driver loaded but no devices found [ 1.652317] ppdev: user-space parallel port driver [ 1.657048] systemd[1]: Started Read required files in advance. [ 1.662903] systemd[1]: Starting udev Coldplug all Devices... [ 1.666005] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.674978] systemd[1]: Mounted POSIX Message Queue File System. [ 1.681493] systemd[1]: Mounted Debug File System. [ 1.683735] systemd[1]: Mounted Huge Pages File System. [ 1.686095] systemd[1]: Started Increase datagram queue length. [ 1.688522] systemd[1]: Started Setup Virtual Console. [ 1.692486] systemd[1]: Started Load Kernel Modules. [ 1.695210] systemd[1]: Started Uncomplicated firewall. [ 1.697816] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.700123] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED [ 1.701451] systemd[1]: ureadahead.service: Unit entered failed state. [ 1.702620] systemd[1]: ureadahead.service: Failed with result 'exit-code'. [ 1.729170] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.735826] systemd[1]: Starting Apply Kernel Variables... [ 1.745397] systemd[1]: Mounting FUSE Control File System... [ 1.751291] systemd[1]: Listening on Syslog Socket. [ 1.754426] systemd[1]: Starting Journal Service... [ 1.759974] systemd[1]: Mounted FUSE Control File System. [ 1.769670] [drm] RC6 off [ 1.769928] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.772866] systemd[1]: Started Apply Kernel Variables. [ 1.787676] systemd[1]: Starting udev Kernel Device Manager... [ 1.801107] systemd[1]: Started udev Coldplug all Devices. [ 1.821391] systemd[1]: Started udev Kernel Device Manager. [ 1.822625] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.826560] systemd[1]: Starting Remount Root and Kernel File Systems... [ 1.834447] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 1.835163] systemd[1]: Started Remount Root and Kernel File Systems. [ 1.840889] systemd[1]: Starting Load/Save Random Seed... [ 1.848022] systemd[1]: Reached target Local File Systems (Pre). [ 1.855480] systemd[1]: Started Load/Save Random Seed. [ 1.877282] systemd[1]: Started Journal Service. [ 1.884228] systemd-journald[272]: Received request to flush runtime journal from PID 1 [ 2.048078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.051011] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=96000/96000 [ 2.051013] [drm:intel_panel_actually_set_backlight] set backlight PWM = 96000 [ 2.116090] Bluetooth: Core ver 2.21 [ 2.116099] NET: Registered protocol family 31 [ 2.116100] Bluetooth: HCI device and connection manager initialized [ 2.116102] Bluetooth: HCI socket layer initialized [ 2.116104] Bluetooth: L2CAP socket layer initialized [ 2.116107] Bluetooth: SCO socket layer initialized [ 2.117062] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 2.117064] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [ 2.155609] Intel(R) Wireless WiFi driver for Linux [ 2.155611] Copyright(c) 2003- 2015 Intel Corporation [ 2.159600] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-21.ucode failed with error -2 [ 2.159632] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-20.ucode failed with error -2 [ 2.159641] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2 [ 2.159648] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2 [ 2.159654] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2 [ 2.159737] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-16.ucode failed with error -2 [ 2.159782] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-15.ucode failed with error -2 [ 2.159792] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-14.ucode failed with error -2 [ 2.160736] iwlwifi 0000:02:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm [ 2.165485] usbcore: registered new interface driver btusb [ 2.175906] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 2.176232] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 2.191009] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 2.192050] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2.192274] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2.219972] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.231618] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 2.231830] Adding 4121596k swap on /dev/sda3. Priority:-1 extents:1 across:4121596k SSFS [ 2.313788] random: nonblocking pool is initialized [ 2.377197] SSE version of gcm_enc/dec engaged. [ 2.393817] ifquery[459]: segfault at 0 ip 00007f886ce052c0 sp 00007ffe8eff9338 error 4 in libc-2.21.so[7f886ccc0000+1c0000] [ 2.437856] audit: type=1400 audit(4039542336.667:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=476 comm="apparmor_parser" [ 2.437861] audit: type=1400 audit(4039542336.667:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=476 comm="apparmor_parser" [ 2.445819] audit: type=1400 audit(4039542336.703:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=476 comm="apparmor_parser" [ 2.445824] audit: type=1400 audit(4039542336.703:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=476 comm="apparmor_parser" [ 2.445827] audit: type=1400 audit(4039542336.703:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=476 comm="apparmor_parser" [ 2.445829] audit: type=1400 audit(4039542336.703:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=476 comm="apparmor_parser" [ 2.481158] audit: type=1400 audit(4039542336.839:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=476 comm="apparmor_parser" [ 2.481162] audit: type=1400 audit(4039542336.839:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=476 comm="apparmor_parser" [ 2.481164] audit: type=1400 audit(4039542336.839:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=476 comm="apparmor_parser" [ 2.574169] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.605961] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.605964] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.605965] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 2.605966] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.605967] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.605969] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 2.629284] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9 [ 2.629386] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10 [ 2.629423] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11 [ 2.629459] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12 [ 2.629495] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13 [ 2.689755] intel_rapl: Found RAPL domain package [ 2.689758] intel_rapl: Found RAPL domain core [ 2.689759] intel_rapl: Found RAPL domain uncore [ 2.689760] intel_rapl: Found RAPL domain dram [ 2.691728] intel_rapl: Found RAPL domain package [ 2.691730] intel_rapl: Found RAPL domain core [ 2.691731] intel_rapl: Found RAPL domain uncore [ 2.691732] intel_rapl: Found RAPL domain dram [ 2.699304] intel_rapl: Found RAPL domain package [ 2.699306] intel_rapl: Found RAPL domain core [ 2.699307] intel_rapl: Found RAPL domain uncore [ 2.699308] intel_rapl: Found RAPL domain dram [ 2.699604] intel_rapl: Found RAPL domain package [ 2.699606] intel_rapl: Found RAPL domain core [ 2.699607] intel_rapl: Found RAPL domain uncore [ 2.699608] intel_rapl: Found RAPL domain dram [ 2.772151] dw-apb-uart.8: ttyS4 at MMIO 0x92324000 (irq = 4, base_baud = 115200) is a 16550A [ 2.798622] dw-apb-uart.9: ttyS5 at MMIO 0x92325000 (irq = 5, base_baud = 115200) is a 16550A [ 2.825064] dw-apb-uart.10: ttyS6 at MMIO 0x92326000 (irq = 6, base_baud = 115200) is a 16550A [ 2.825863] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 2.826772] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 2.828617] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 2.829511] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 2.830374] i2c_hid i2c-ELAN221D:00: hid_descr_cmd failed [ 2.848954] asix 1-4:1.0 eth0: register 'asix' at usb-0000:00:15.0-4, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:c2:a7 [ 2.848973] usbcore: registered new interface driver asix [ 2.853058] dw-apb-uart.11: ttyS7 at MMIO 0x92327000 (irq = 7, base_baud = 115200) is a 16550A [ 2.857592] i2c_hid i2c-ALPS0001:00: hid_descr_cmd failed [ 2.957641] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 2.997801] asix 1-4:1.0 enx00106031c2a7: renamed from eth0 [ 3.031651] asix 1-4:1.0 enx00106031c2a7: link down [ 3.031967] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2a7: link is not ready [ 3.335134] IPv6: ADDRCONF(NETDEV_CHANGE): enx00106031c2a7: link becomes ready [ 3.335259] asix 1-4:1.0 enx00106031c2a7: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 3.569479] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.569479] Bluetooth: BNEP filters: protocol multicast [ 3.569482] Bluetooth: BNEP socket layer initialized [ 3.588287] cgroup: new mount options do not match the existing superblock, will be ignored [ 3.751793] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3.788195] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3.806525] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.808828] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.809042] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.824587] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.824731] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.832913] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.936775] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6.500619] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 6.500620] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 6.500621] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 11.542056] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 11.542057] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 11.542058] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 11.970454] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 11.970455] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 11.970456] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 17.204398] pm_rpm: executing [ 17.204540] [drm:i915_gem_open] [ 17.204726] [drm:i915_gem_open] [ 17.205395] [drm:drm_mode_addfb2] [FB:80] [ 17.230017] [drm:drm_mode_addfb2] [FB:107] [ 17.240338] ahci 0000:00:12.0: port does not support device sleep [ 17.530874] pm_rpm: starting subtest gem-pread [ 17.530963] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 17.530966] [drm:drm_mode_setcrtc] [CONNECTOR:39:eDP-1] [ 17.530975] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 17.532647] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 17.532655] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 17.532657] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 17.532658] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 17.536616] [drm:intel_edp_backlight_off] [ 17.604350] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 17.604358] [drm:intel_disable_pipe] disabling pipe A [ 17.606474] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 17.606476] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 17.606517] [drm:edp_panel_off] Turn eDP port A panel power off [ 17.606520] [drm:wait_panel_off] Wait for panel power off time [ 17.606521] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000060 [ 17.619603] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 17.619605] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 17.619606] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 17.619618] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 17.621007] [drm:wait_panel_status] Wait complete [ 17.621010] [drm:intel_disable_shared_dpll] disable PORT PLL A (active 1, on? 1) for crtc 26 [ 17.621016] [drm:intel_disable_shared_dpll] disabling PORT PLL A [ 17.621022] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 17.621023] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.621027] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 17.621029] [drm:verify_encoder_state] [ENCODER:46:TMDS-46] [ 17.621029] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 17.621030] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 17.621031] [drm:verify_encoder_state] [ENCODER:50:DP MST-50] [ 17.621032] [drm:verify_encoder_state] [ENCODER:53:TMDS-53] [ 17.621033] [drm:verify_encoder_state] [ENCODER:55:DP MST-55] [ 17.621033] [drm:verify_encoder_state] [ENCODER:56:DP MST-56] [ 17.621034] [drm:verify_encoder_state] [ENCODER:57:DP MST-57] [ 17.621035] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 17.621036] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 17.621038] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 17.621041] [drm:verify_single_dpll_state] PORT PLL A [ 17.621042] [drm:verify_single_dpll_state] PORT PLL B [ 17.621046] [drm:verify_single_dpll_state] PORT PLL C [ 17.621054] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 17.621055] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.621059] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 17.621061] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.621065] [drm:verify_crtc_state] [CRTC:26] [ 17.621074] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1] [ 17.621081] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 17.621083] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 17.621084] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31] scaler_user index 1.31 [ 17.621134] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 17.621142] [drm:intel_disable_pipe] disabling pipe B [ 17.626460] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 2, on? 1) for crtc 31 [ 17.626465] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 17.626469] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.626471] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 17.626473] [drm:verify_encoder_state] [ENCODER:46:TMDS-46] [ 17.626474] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 17.626474] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 17.626475] [drm:verify_encoder_state] [ENCODER:50:DP MST-50] [ 17.626476] [drm:verify_encoder_state] [ENCODER:53:TMDS-53] [ 17.626477] [drm:verify_encoder_state] [ENCODER:55:DP MST-55] [ 17.626478] [drm:verify_encoder_state] [ENCODER:56:DP MST-56] [ 17.626478] [drm:verify_encoder_state] [ENCODER:57:DP MST-57] [ 17.626479] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 17.626480] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 17.626481] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 17.626483] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 17.626484] [drm:verify_single_dpll_state] PORT PLL A [ 17.626485] [drm:verify_single_dpll_state] PORT PLL B [ 17.626486] [drm:verify_single_dpll_state] PORT PLL C [ 17.626492] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.626495] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.626497] [drm:verify_crtc_state] [CRTC:31] [ 17.626504] [drm:drm_mode_setcrtc] [CRTC:36:crtc-2] [ 17.626510] [drm:intel_modeset_checks] New cdclk calculated to be atomic 144000, actual 144000 [ 17.626511] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 17.626513] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:36] scaler_user index 2.31 [ 17.627984] [drm:intel_disable_pipe] disabling pipe C [ 17.633092] [drm:intel_disable_shared_dpll] disable PORT PLL C (active 4, on? 1) for crtc 36 [ 17.633097] [drm:intel_disable_shared_dpll] disabling PORT PLL C [ 17.636720] [drm:intel_update_cdclk] Current CD clock rate: 144000 kHz [ 17.636722] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 17.636724] [drm:verify_encoder_state] [ENCODER:46:TMDS-46] [ 17.636725] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 17.636726] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 17.636727] [drm:verify_encoder_state] [ENCODER:50:DP MST-50] [ 17.636728] [drm:verify_encoder_state] [ENCODER:53:TMDS-53] [ 17.636729] [drm:verify_encoder_state] [ENCODER:55:DP MST-55] [ 17.636729] [drm:verify_encoder_state] [ENCODER:56:DP MST-56] [ 17.636730] [drm:verify_encoder_state] [ENCODER:57:DP MST-57] [ 17.636731] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 17.636732] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 17.636734] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 17.636735] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 17.636736] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 17.636737] [drm:verify_single_dpll_state] PORT PLL A [ 17.636738] [drm:verify_single_dpll_state] PORT PLL B [ 17.636739] [drm:verify_single_dpll_state] PORT PLL C [ 17.636742] [drm:intel_power_well_disable] disabling power well 2 [ 17.636745] [drm:skl_set_power_well] Disabling power well 2 [ 17.636747] [drm:verify_crtc_state] [CRTC:36] [ 17.636748] [drm:intel_power_well_disable] disabling DC off [ 17.636750] [drm:gen9_enable_dc5] Enabling DC5 [ 17.636751] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 17.636752] [drm:intel_power_well_disable] disabling always-on [ 20.038451] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000010, dig 0x18001819, pins 0x00000020 [ 20.038454] [drm:intel_hpd_irq_handler] digital hpd port B - short [ 20.038608] [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [ 20.038611] [drm:intel_power_well_enable] enabling always-on [ 20.038612] [drm:intel_power_well_enable] enabling DC off [ 20.038675] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 20.038686] [drm:intel_power_well_enable] enabling power well 2 [ 20.038687] [drm:skl_set_power_well] Enabling power well 2 [ 20.038830] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 20.039012] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 20.039090] [drm:intel_power_well_disable] disabling power well 2 [ 20.039093] [drm:skl_set_power_well] Disabling power well 2 [ 20.039094] [drm:intel_power_well_disable] disabling DC off [ 20.039096] [drm:gen9_enable_dc5] Enabling DC5 [ 20.039097] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 20.039098] [drm:intel_power_well_disable] disabling always-on [ 20.039101] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 20.039102] [drm:i915_hotplug_work_func] Connector DP-1 (pin 5) received hotplug event. [ 20.039104] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 20.039104] [drm:intel_power_well_enable] enabling always-on [ 20.039105] [drm:intel_power_well_enable] enabling DC off [ 20.039222] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 20.039233] [drm:intel_power_well_enable] enabling power well 2 [ 20.039234] [drm:skl_set_power_well] Enabling power well 2 [ 20.039341] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 20.040071] [drm:intel_power_well_disable] disabling power well 2 [ 20.040075] [drm:skl_set_power_well] Disabling power well 2 [ 20.040076] [drm:intel_power_well_disable] disabling DC off [ 20.040078] [drm:gen9_enable_dc5] Enabling DC5 [ 20.040079] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 20.040080] [drm:intel_power_well_disable] disabling always-on [ 20.040081] [drm:intel_hpd_irq_event] [CONNECTOR:47:DP-1] status updated from connected to disconnected [ 20.040082] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 20.040083] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 20.040084] [drm:intel_power_well_enable] enabling always-on [ 20.040085] [drm:intel_power_well_enable] enabling DC off [ 20.040204] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 20.040215] [drm:intel_power_well_enable] enabling power well 2 [ 20.040216] [drm:skl_set_power_well] Enabling power well 2 [ 20.040258] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 20.040259] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 20.040309] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 20.040311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 20.040361] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 20.040363] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 20.040401] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 20.040403] [drm:intel_power_well_disable] disabling power well 2 [ 20.040405] [drm:skl_set_power_well] Disabling power well 2 [ 20.040407] [drm:intel_power_well_disable] disabling DC off [ 20.040408] [drm:gen9_enable_dc5] Enabling DC5 [ 20.040409] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 20.040411] [drm:intel_power_well_disable] disabling always-on [ 20.151365] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000010, dig 0x18001819, pins 0x00000020 [ 20.151367] [drm:intel_hpd_irq_handler] digital hpd port B - short [ 20.151374] [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [ 20.151375] [drm:intel_power_well_enable] enabling always-on [ 20.151375] [drm:intel_power_well_enable] enabling DC off [ 20.151376] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 20.151386] [drm:intel_power_well_enable] enabling power well 2 [ 20.151387] [drm:skl_set_power_well] Enabling power well 2 [ 20.169482] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 20.169563] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 20.169565] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 20.169567] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 20.169568] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 20.171708] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 20.171787] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 20.171789] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 20.171790] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 20.171791] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 20.171977] [drm:intel_dp_probe_mst] Sink is not MST capable [ 20.172085] [drm:drm_dp_i2c_do_msg] native defer [ 20.172561] pm_rpm: exiting, ret=99 [ 20.172918] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 20.172919] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 20.172920] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 20.172921] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 20.172923] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 20.172924] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 20.172925] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 20.172926] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880077a2b800 for pipe A [ 20.172926] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 20.172927] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 20.172927] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 20.172928] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 20.172929] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 20.172929] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 20.172930] [drm:intel_dump_pipe_config] requested mode: [ 20.172931] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 20.172931] [drm:intel_dump_pipe_config] adjusted mode: [ 20.172932] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 20.172933] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 20.172933] [drm:intel_dump_pipe_config] port clock: 270000 [ 20.172934] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 20.172934] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 20.172935] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 20.172936] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 20.172936] [drm:intel_dump_pipe_config] ips: 0 [ 20.172936] [drm:intel_dump_pipe_config] double wide: 0 [ 20.172937] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 20.172938] [drm:intel_dump_pipe_config] planes on this crtc [ 20.172938] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 20.172939] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 20.172940] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 20.172940] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = -1 [ 20.172941] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 20.172942] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 20.172942] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 148500KHz [ 20.172943] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 20.172944] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 20.172944] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 20.172945] [drm:intel_dump_pipe_config] [CRTC:31][modeset] config ffff880077a28800 for pipe B [ 20.172945] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 20.172946] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 20.172946] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 20.172947] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 20.172948] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 20.172948] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 20.172948] [drm:intel_dump_pipe_config] requested mode: [ 20.172949] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 20.172950] [drm:intel_dump_pipe_config] adjusted mode: [ 20.172951] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 20.172952] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 20.172952] [drm:intel_dump_pipe_config] port clock: 162000 [ 20.172952] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 20.172953] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 20.172953] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 20.172954] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 20.172954] [drm:intel_dump_pipe_config] ips: 0 [ 20.172954] [drm:intel_dump_pipe_config] double wide: 0 [ 20.172956] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 20.172956] [drm:intel_dump_pipe_config] planes on this crtc [ 20.172956] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = -1 [ 20.172957] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = -1 [ 20.172958] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = -1 [ 20.172958] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = -1 [ 20.172959] [drm:connected_sink_compute_bpp] [CONNECTOR:54:DP-2] checking for sink bpp constrains [ 20.172960] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 20.172960] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 20.172962] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 20.172962] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 20.172963] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 20.172963] [drm:intel_dump_pipe_config] [CRTC:36][modeset] config ffff880077a28000 for pipe C [ 20.172966] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 20.172967] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 20.172967] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 20.172968] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 20.172969] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 20.172969] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 20.172969] [drm:intel_dump_pipe_config] requested mode: [ 20.172970] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 20.172971] [drm:intel_dump_pipe_config] adjusted mode: [ 20.172972] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 20.172973] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0xa [ 20.172973] [drm:intel_dump_pipe_config] port clock: 162000 [ 20.172973] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 20.172974] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: -1 [ 20.172974] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 20.172975] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 20.172975] [drm:intel_dump_pipe_config] ips: 0 [ 20.172975] [drm:intel_dump_pipe_config] double wide: 0 [ 20.172976] [drm:intel_dump_pipe_config] ddi_pll_sel: 2; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 20.172977] [drm:intel_dump_pipe_config] planes on this crtc [ 20.172977] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = -1 [ 20.172978] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = -1 [ 20.172979] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = -1 [ 20.172980] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 20.172982] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 20.172983] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 20.172983] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 20.172985] [drm:bxt_get_dpll] CRTC:26 using pre-allocated PORT PLL A [ 20.172985] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 20.172986] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 20.172987] [drm:bxt_get_dpll] CRTC:31 using pre-allocated PORT PLL B [ 20.172987] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B [ 20.172988] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31] scaler_user index 1.31 [ 20.172988] [drm:bxt_get_dpll] CRTC:36 using pre-allocated PORT PLL C [ 20.172988] [drm:intel_reference_shared_dpll] using PORT PLL C for pipe C [ 20.172989] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:36] scaler_user index 2.31 [ 20.172992] [drm:drm_dp_i2c_do_msg] native defer [ 20.173753] [drm:drm_dp_i2c_do_msg] native defer [ 20.173976] [drm:intel_update_cdclk] Current CD clock rate: 288000 kHz [ 20.173976] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 20.173977] [drm:verify_encoder_state] [ENCODER:46:TMDS-46] [ 20.173977] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 20.173978] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 20.173978] [drm:verify_encoder_state] [ENCODER:50:DP MST-50] [ 20.173979] [drm:verify_encoder_state] [ENCODER:53:TMDS-53] [ 20.173979] [drm:verify_encoder_state] [ENCODER:55:DP MST-55] [ 20.173979] [drm:verify_encoder_state] [ENCODER:56:DP MST-56] [ 20.173980] [drm:verify_encoder_state] [ENCODER:57:DP MST-57] [ 20.173980] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 20.173982] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 20.173983] [drm:verify_single_dpll_state] PORT PLL A [ 20.173983] [drm:verify_single_dpll_state] PORT PLL B [ 20.173984] [drm:verify_single_dpll_state] PORT PLL C [ 20.173985] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 20.173985] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 20.174118] [drm:drm_dp_i2c_do_msg] native defer [ 20.174122] [drm:edp_panel_on] Turn eDP port A panel power on [ 20.174123] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 20.174125] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060 [ 20.174125] [drm:wait_panel_status] Wait complete [ 20.174126] [drm:wait_panel_on] Wait for panel power on [ 20.174127] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000063 [ 20.178422] ahci 0000:00:12.0: port does not support device sleep [ 20.200653] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 20.200654] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 20.200655] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 20.223828] [drm:wait_panel_status] Wait complete [ 20.223979] [drm:drm_dp_i2c_do_msg] native defer [ 20.223982] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 20.223984] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 20.224768] [drm:drm_dp_i2c_do_msg] native defer [ 20.224857] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 20.224857] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 20.225088] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 20.225676] [drm:drm_dp_i2c_do_msg] native defer [ 20.225764] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 20.225803] [drm:skylake_pfit_enable] for crtc_state = ffff880077a2b800 [ 20.225849] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 20.225851] [drm:intel_enable_pipe] enabling pipe A [ 20.225859] [drm:intel_edp_backlight_on] [ 20.225860] [drm:intel_panel_enable_backlight] pipe A [ 20.225861] [drm:intel_panel_actually_set_backlight] set backlight PWM = 96000 [ 20.225863] [drm:intel_psr_enable] PSR not supported on this platform [ 20.225863] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 20.225878] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 2, on? 0) for crtc 31 [ 20.225878] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 20.226953] [drm:drm_dp_i2c_do_msg] native defer [ 20.227728] [drm:drm_dp_i2c_do_msg] native defer [ 20.228538] [drm:drm_dp_i2c_do_msg] native defer [ 20.229347] [drm:drm_dp_i2c_do_msg] native defer [ 20.230160] [drm:drm_dp_i2c_do_msg] native defer [ 20.230973] [drm:drm_dp_i2c_do_msg] native defer [ 20.231782] [drm:drm_dp_i2c_do_msg] native defer [ 20.232588] [drm:drm_dp_i2c_do_msg] native defer [ 20.233400] [drm:drm_dp_i2c_do_msg] native defer [ 20.234209] [drm:drm_dp_i2c_do_msg] native defer [ 20.234990] [drm:drm_dp_i2c_do_msg] native defer [ 20.235769] [drm:drm_dp_i2c_do_msg] native defer [ 20.236543] [drm:drm_dp_i2c_do_msg] native defer [ 20.237323] [drm:drm_dp_i2c_do_msg] native defer [ 20.238132] [drm:drm_dp_i2c_do_msg] native defer [ 20.238940] [drm:drm_dp_i2c_do_msg] native defer [ 20.239745] [drm:drm_dp_i2c_do_msg] native defer [ 20.240549] [drm:drm_dp_i2c_do_msg] native defer [ 20.241382] [drm:drm_dp_i2c_do_msg] native defer [ 20.242189] [drm:drm_dp_i2c_do_msg] native defer [ 20.243000] [drm:drm_dp_i2c_do_msg] native defer [ 20.243808] [drm:drm_dp_i2c_do_msg] native defer [ 20.244474] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 20.244604] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 20.245337] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 20.245338] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 20.246333] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 20.249645] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 20.249691] [drm:skylake_pfit_enable] for crtc_state = ffff880077a28800 [ 20.249738] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 20.249740] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 20.249742] [drm:intel_enable_pipe] enabling pipe B [ 20.249761] [drm:intel_enable_shared_dpll] enable PORT PLL C (active 4, on? 0) for crtc 36 [ 20.249761] [drm:intel_enable_shared_dpll] enabling PORT PLL C [ 20.250500] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 20.250501] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 20.250735] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 20.254026] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 20.254071] [drm:skylake_pfit_enable] for crtc_state = ffff880077a28000 [ 20.254121] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 20.254122] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 20.254123] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 20.254125] [drm:intel_enable_pipe] enabling pipe C [ 20.258275] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 20.258276] [drm:verify_crtc_state] [CRTC:26] [ 20.258290] [drm:verify_single_dpll_state] PORT PLL A [ 20.258297] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 20.258298] [drm:verify_crtc_state] [CRTC:31] [ 20.258305] [drm:verify_single_dpll_state] PORT PLL B [ 20.258312] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 20.258313] [drm:verify_crtc_state] [CRTC:36] [ 20.258322] [drm:verify_single_dpll_state] PORT PLL C [ 20.258332] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 20.258333] [drm:i915_hotplug_work_func] Connector DP-1 (pin 5) received hotplug event. [ 20.258333] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 20.258334] [drm:intel_hpd_irq_event] [CONNECTOR:47:DP-1] status updated from disconnected to connected [ 20.258334] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 20.258335] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 20.258387] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 20.258387] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 20.258437] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 20.258438] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 20.258489] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 20.258489] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 20.258527] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 20.258540] [drm:drm_fb_helper_hotplug_event] [ 20.258541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 20.258542] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 20.259716] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 20.259824] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 20.259915] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 20.259917] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 20.259919] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 20.259919] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 20.259921] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 20.260026] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 20.260103] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 20.260104] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 20.260105] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 20.260105] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 20.260287] [drm:intel_dp_probe_mst] Sink is not MST capable [ 20.260408] [drm:drm_edid_to_eld] ELD monitor VX279 [ 20.260409] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 20.260409] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 20.260421] [drm:drm_mode_debug_printmodeline] Modeline 117:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 20.260422] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 20.260424] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 20.260425] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 20.260426] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 20.260427] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 20.260428] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 20.260429] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 20.260430] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 20.260431] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 20.260432] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 20.260433] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 20.260434] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 20.260435] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 20.260436] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 20.260437] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 20.260438] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 20.260439] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 20.260440] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 20.260441] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 20.260442] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 20.260443] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 20.260444] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 20.260445] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 20.260446] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 20.260447] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 20.260448] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 20.260449] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 20.260450] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 20.260451] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 20.260452] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 20.260453] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 20.260454] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 20.260455] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 20.260456] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 20.260496] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 20.260496] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 20.260534] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 20.260534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 20.260572] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 20.260573] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 20.260610] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 20.260611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 20.260611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 20.260612] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 20.260717] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 00 00 01 00 02 02 06 00 00 00 00 [ 20.260794] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 20.260795] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 20.260796] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 20.260796] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 20.260884] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 20.260887] [drm:drm_mode_debug_printmodeline] Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 20.260887] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y [ 20.260888] [drm:drm_mode_debug_printmodeline] Modeline 110:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 20.260889] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 20.260890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 20.260891] [drm:drm_mode_debug_printmodeline] Modeline 93:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 20.260892] [drm:drm_mode_debug_printmodeline] Modeline 90:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 20.260893] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 20.260894] [drm:drm_mode_debug_printmodeline] Modeline 88:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 20.260895] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 20.260896] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 20.260897] [drm:drm_mode_debug_printmodeline] Modeline 95:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 20.260898] [drm:drm_mode_debug_printmodeline] Modeline 98:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 20.260898] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 20.260899] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 20.260950] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 20.260951] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 20.261001] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 20.261002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 20.261051] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 20.261052] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 20.261103] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 20.261104] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 20.261107] [drm:drm_setup_crtcs] [ 20.261108] [drm:drm_enable_connectors] connector 39 enabled? yes [ 20.261109] [drm:drm_enable_connectors] connector 47 enabled? yes [ 20.261109] [drm:drm_enable_connectors] connector 51 enabled? no [ 20.261109] [drm:drm_enable_connectors] connector 54 enabled? yes [ 20.261110] [drm:drm_enable_connectors] connector 58 enabled? no [ 20.261111] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 20.261111] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 20.261112] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080 [ 20.261113] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 20.261113] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 20.261114] [drm:intel_fb_initial_config] connector DP-1 on pipe B [CRTC:31]: 1920x1080 [ 20.261114] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 20.261115] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 20.261115] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 20.261116] [drm:intel_fb_initial_config] using first mode listed on connector DP-2 [ 20.261116] [drm:intel_fb_initial_config] connector DP-2 on pipe C [CRTC:36]: 1920x1080 [ 20.261117] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 20.261118] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 20.261119] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 20.261119] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 20.261134] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 20.261135] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 20.261135] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 20.261185] [drm:drm_fb_helper_hotplug_event] [ 20.261186] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 20.261186] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 20.261268] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 20.261345] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 20.261431] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 20.261432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 20.261433] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 20.261434] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 20.261434] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 20.261540] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 20.261617] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 20.261618] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 20.261619] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 20.261619] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 20.261800] [drm:intel_dp_probe_mst] Sink is not MST capable [ 20.261918] [drm:drm_edid_to_eld] ELD monitor VX279 [ 20.261919] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 20.261919] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 20.261931] [drm:drm_mode_debug_printmodeline] Modeline 117:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 20.261932] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 20.261934] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 20.261935] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 20.261936] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 20.261937] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 20.261938] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 20.261939] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 20.261940] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 20.261941] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 20.261942] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 20.261943] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 20.261944] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 20.261945] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 20.261946] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 20.261947] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 20.261948] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 20.261949] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 20.261950] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 20.261951] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 20.261952] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 20.261953] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 20.261954] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 20.261955] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 20.261956] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 20.261957] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 20.261958] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 20.261959] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 20.261960] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 20.261961] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 20.261962] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 20.261963] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 20.261964] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 20.261965] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 20.261965] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 20.262017] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 20.262017] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 20.262067] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 20.262068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 20.262118] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 20.262118] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 20.262169] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 20.262170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 20.262171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 20.262171] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 20.262279] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 00 00 01 00 02 02 06 00 00 00 00 [ 20.262353] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 20.262354] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 20.262355] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 20.262356] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 20.262446] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 20.262449] [drm:drm_mode_debug_printmodeline] Modeline 104:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 20.262450] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y [ 20.262451] [drm:drm_mode_debug_printmodeline] Modeline 110:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 20.262451] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 20.262452] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 20.262453] [drm:drm_mode_debug_printmodeline] Modeline 93:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 20.262454] [drm:drm_mode_debug_printmodeline] Modeline 90:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 20.262455] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 20.262456] [drm:drm_mode_debug_printmodeline] Modeline 88:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 20.262457] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 20.262458] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 20.262459] [drm:drm_mode_debug_printmodeline] Modeline 95:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 20.262460] [drm:drm_mode_debug_printmodeline] Modeline 98:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 20.262461] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 20.262461] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 20.262513] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 20.262513] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 20.262564] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 20.262565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 20.262615] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 20.262615] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 20.262665] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 20.262666] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 20.262667] [drm:drm_setup_crtcs] [ 20.262668] [drm:drm_enable_connectors] connector 39 enabled? yes [ 20.262668] [drm:drm_enable_connectors] connector 47 enabled? yes [ 20.262669] [drm:drm_enable_connectors] connector 51 enabled? no [ 20.262669] [drm:drm_enable_connectors] connector 54 enabled? yes [ 20.262669] [drm:drm_enable_connectors] connector 58 enabled? no [ 20.262670] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 20.262671] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 20.262671] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080 [ 20.262672] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 20.262672] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 20.262673] [drm:intel_fb_initial_config] connector DP-1 on pipe B [CRTC:31]: 1920x1080 [ 20.262673] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 20.262674] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 20.262674] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 20.262675] [drm:intel_fb_initial_config] using first mode listed on connector DP-2 [ 20.262675] [drm:intel_fb_initial_config] connector DP-2 on pipe C [CRTC:36]: 1920x1080 [ 20.262676] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 20.262676] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 20.262678] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 20.262678] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 20.262688] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 20.262689] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 20.262689] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 20.262772] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 20.262773] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 20.262774] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 20.262827] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 20.262828] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 20.262828] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 20.267178] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 20.267180] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4 [ 20.267181] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8 [ 20.892967] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 20.892970] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067