[ 0.000000] microcode: microcode updated early to revision 0x4, date = 2013-06-28 [ 0.000000] Linux version 4.6.0-rc7-intel+ (root@ozmage-lappy) (gcc version 6.1.1 20160501 (GCC) ) #1 SMP PREEMPT Wed May 11 21:34:37 AST 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-rc root=UUID=d27b2815-7e94-43d4-b047-c44f8b1c6461 rw splash rd.udev.log-priority=3 rd.systemd.show_status=false logo.nologo systemd.show_status=0 console=tty0 splash=verbose,theme:arch-black loglevel=3 resume=/dev/sda6 elevator=bfq kdbus=1 libahci.ignore_sss=1 modprobe.blacklist=i915 vt.handoff=7 drm.debug=14 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b70cffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b70d0000-0x00000000b70d01ff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b70d0200-0x00000000b70d1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b70d2000-0x00000000b71cffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b71d0000-0x00000000b71effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b71f0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: TOSHIBA PORTEGE R700/Portable PC, BIOS Version 2.20 12/22/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xb8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xb70d0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] BRK [0x01f05000, 0x01f05fff] PGTABLE [ 0.000000] BRK [0x01f06000, 0x01f06fff] PGTABLE [ 0.000000] BRK [0x01f07000, 0x01f07fff] PGTABLE [ 0.000000] BRK [0x01f08000, 0x01f08fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x37297000-0x37942fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0030 000014 (v00 TOSHIB) [ 0.000000] ACPI: RSDT 0x00000000B71EF038 000050 (v01 TOSHIB A007B 00000002 01000013) [ 0.000000] ACPI: FACP 0x00000000B71EE000 000081 (v02 TOSHIB A007B 00000002 LOHR 0000005F) [ 0.000000] ACPI: DSDT 0x00000000B71DC000 009312 (v02 TOSHIB A007B 20111220 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000B715A000 000040 [ 0.000000] ACPI: HPET 0x00000000B71ED000 000038 (v01 TOSHIB A007B 00000001 LOHR 0000005F) [ 0.000000] ACPI: APIC 0x00000000B71EC000 0000BC (v01 TOSHIB A007B 00000001 LOHR 0000005F) [ 0.000000] ACPI: MCFG 0x00000000B71EB000 00003C (v01 TOSHIB A007B 00000001 LOHR 0000005F) [ 0.000000] ACPI: TCPA 0x00000000B71E9000 000032 (v02 TOSHIB A007B 00000000 LOHR 0000005F) [ 0.000000] ACPI: BOOT 0x00000000B71E8000 000028 (v01 TOSHIB A007B 00000000 LOHR 0000005F) [ 0.000000] ACPI: SLIC 0x00000000B71E7000 000176 (v01 TOSHIB A007B 00000000 LOHR 0000005F) [ 0.000000] ACPI: SSDT 0x00000000B71DB000 0002D5 (v01 TOSHIB SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000B71D8000 00072A (v01 TOSHIB PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 0x00000000B71EA000 0000A0 (v32 TOSHIB A007B 00000001 LOHR 0000005F) [ 0.000000] ACPI: SSDT 0x00000000B71D7000 000A10 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000137ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b70cffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000137ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff] [ 0.000000] On node 0 totalpages: 979053 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11652 pages used for memmap [ 0.000000] DMA32 zone: 745680 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 229376 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000bc000000-0x00000000bfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb70d0000-0xb70d0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb70d1000-0xb70d1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb70d2000-0xb71cffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb71d0000-0xb71effff] [ 0.000000] PM: Registered nosave memory: [mem 0xb71f0000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 31 pages/cpu @ffff880137c00000 s87832 r8192 d30952 u262144 [ 0.000000] pcpu-alloc: s87832 r8192 d30952 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 963732 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-rc root=UUID=d27b2815-7e94-43d4-b047-c44f8b1c6461 rw splash rd.udev.log-priority=3 rd.systemd.show_status=false logo.nologo systemd.show_status=0 console=tty0 splash=verbose,theme:arch-black loglevel=3 resume=/dev/sda6 elevator=bfq kdbus=1 libahci.ignore_sss=1 modprobe.blacklist=i915 vt.handoff=7 drm.debug=14 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3759000K/3916212K available (7448K kernel code, 957K rwdata, 2288K rodata, 1108K init, 984K bss, 157212K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:8448 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2527.111 MHz processor [ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.22 BogoMIPS (lpj=2527111) [ 0.000035] pid_max: default: 32768 minimum: 301 [ 0.000043] ACPI: Core revision 20160108 [ 0.007983] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.008008] Security Framework initialized [ 0.008010] Yama: becoming mindful. [ 0.008023] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.008025] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.008249] CPU: Physical Processor ID: 0 [ 0.008251] CPU: Processor Core ID: 0 [ 0.008255] mce: CPU supports 9 MCE banks [ 0.008266] CPU0: Thermal monitoring enabled (TM1) [ 0.008272] process: using mwait in idle threads [ 0.008276] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.008277] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.008633] Freeing SMP alternatives memory: 28K (ffffffff81e06000 - ffffffff81e0d000) [ 0.009491] ftrace: allocating 27285 entries in 107 pages [ 0.023572] smpboot: Max logical packages: 4 [ 0.023577] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.024084] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.135774] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz (family: 0x6, model: 0x25, stepping: 0x5) [ 0.135790] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.135808] core: CPUID marked event: 'bus cycles' unavailable [ 0.135811] ... version: 3 [ 0.135812] ... bit width: 48 [ 0.135813] ... generic registers: 4 [ 0.135814] ... value mask: 0000ffffffffffff [ 0.135815] ... max period: 000000007fffffff [ 0.135816] ... fixed-purpose events: 3 [ 0.135817] ... event mask: 000000070000000f [ 0.136392] x86: Booting SMP configuration: [ 0.136395] .... node #0, CPUs: #1 #2 #3 [ 0.321831] x86: Booted up 1 node, 4 CPUs [ 0.321836] smpboot: Total of 4 processors activated (20215.39 BogoMIPS) [ 0.324073] devtmpfs: initialized [ 0.324143] x86/mm: Memory block size: 128MB [ 0.326898] PM: Registering ACPI NVS region [mem 0xb70d0000-0xb70d01ff] (512 bytes) [ 0.326900] PM: Registering ACPI NVS region [mem 0xb70d2000-0xb71cffff] (1040384 bytes) [ 0.326996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.327062] xor: measuring software checksum speed [ 0.336752] prefetch64-sse: 13232.000 MB/sec [ 0.346751] generic_sse: 11320.000 MB/sec [ 0.346753] xor: using function: prefetch64-sse (13232.000 MB/sec) [ 0.346760] pinctrl core: initialized pinctrl subsystem [ 0.346818] RTC time: 22:45:47, date: 05/11/16 [ 0.346936] NET: Registered protocol family 16 [ 0.350803] cpuidle: using governor ladder [ 0.354802] cpuidle: using governor menu [ 0.354906] Simple Boot Flag at 0x7c set to 0x1 [ 0.354927] ACPI: bus type PCI registered [ 0.354929] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.355003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.355005] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.355016] PCI: Using configuration type 1 for base access [ 0.355172] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.355173] mtrr: probably your BIOS does not setup all CPUs. [ 0.355174] mtrr: corrected configuration. [ 0.359934] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.376748] raid6: sse2x1 gen() 6203 MB/s [ 0.393748] raid6: sse2x1 xor() 4933 MB/s [ 0.410749] raid6: sse2x2 gen() 7308 MB/s [ 0.427744] raid6: sse2x2 xor() 5810 MB/s [ 0.444746] raid6: sse2x4 gen() 8464 MB/s [ 0.461740] raid6: sse2x4 xor() 6324 MB/s [ 0.461742] raid6: using algorithm sse2x4 gen() 8464 MB/s [ 0.461743] raid6: .... xor() 6324 MB/s, rmw enabled [ 0.461744] raid6: using ssse3x2 recovery algorithm [ 0.461798] ACPI: Added _OSI(Module Device) [ 0.461800] ACPI: Added _OSI(Processor Device) [ 0.461801] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.461803] ACPI: Added _OSI(Processor Aggregator Device) [ 0.462194] ACPI: Executed 1 blocks of module-level executable AML code [ 0.464130] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.465250] ACPI: Dynamic OEM Table Load: [ 0.465257] ACPI: SSDT 0xFFFF8801336DB800 00049D (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.465670] ACPI: Dynamic OEM Table Load: [ 0.465676] ACPI: SSDT 0xFFFF8801336D7000 0008B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.466330] ACPI: Dynamic OEM Table Load: [ 0.466336] ACPI: SSDT 0xFFFF8801337C2C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.467116] ACPI: Dynamic OEM Table Load: [ 0.467121] ACPI: SSDT 0xFFFF8801337F9800 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.467908] ACPI: Interpreter enabled [ 0.467929] ACPI: (supports S0 S3 S4 S5) [ 0.467930] ACPI: Using IOAPIC for interrupt routing [ 0.467955] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.471875] ACPI: Power Resource [PDOC] (off) [ 0.471948] acpi PNP0A05:00: ACPI dock station (docks/bays count: 1) [ 0.473341] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.474732] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.474738] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.474744] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.475180] PCI host bridge to bus 0000:00 [ 0.475184] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.475185] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.475187] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.475189] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.475190] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.475192] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.475194] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.475195] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.475197] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.475206] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000 [ 0.475227] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.475311] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000 [ 0.475321] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.475327] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.475332] pci 0000:00:02.0: reg 0x20: [io 0x3030-0x3037] [ 0.475452] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.475478] pci 0000:00:16.0: reg 0x10: [mem 0xd4704000-0xd470400f 64bit] [ 0.475566] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.475662] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.475684] pci 0000:00:1a.0: reg 0x10: [mem 0xd4709000-0xd47093ff] [ 0.475789] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.475842] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.475887] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.475911] pci 0000:00:1b.0: reg 0x10: [mem 0xd4700000-0xd4703fff 64bit] [ 0.476015] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.476072] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.476113] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.476211] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.476302] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.476398] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.476490] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400 [ 0.476587] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.476643] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.476684] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400 [ 0.476785] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.476884] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.476905] pci 0000:00:1d.0: reg 0x10: [mem 0xd4708000-0xd47083ff] [ 0.477006] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.477056] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.477094] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.477234] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100 [ 0.477412] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601 [ 0.477434] pci 0000:00:1f.2: reg 0x10: [io 0x3028-0x302f] [ 0.477444] pci 0000:00:1f.2: reg 0x14: [io 0x303c-0x303f] [ 0.477455] pci 0000:00:1f.2: reg 0x18: [io 0x3020-0x3027] [ 0.477466] pci 0000:00:1f.2: reg 0x1c: [io 0x3038-0x303b] [ 0.477477] pci 0000:00:1f.2: reg 0x20: [io 0x3000-0x301f] [ 0.477488] pci 0000:00:1f.2: reg 0x24: [mem 0xd4707000-0xd47077ff] [ 0.477547] pci 0000:00:1f.2: PME# supported from D3hot [ 0.477638] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 [ 0.477663] pci 0000:00:1f.6: reg 0x10: [mem 0xd4706000-0xd4706fff 64bit] [ 0.477881] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.477889] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 0.477982] pci 0000:02:00.0: [8086:422c] type 00 class 0x028000 [ 0.478026] pci 0000:02:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit] [ 0.478226] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.479815] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.479826] pci 0000:00:1c.1: bridge window [mem 0xd4500000-0xd45fffff] [ 0.479906] acpiphp: Slot [1] registered [ 0.479912] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.479917] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.479922] pci 0000:00:1c.2: bridge window [mem 0xd2500000-0xd44fffff] [ 0.479929] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd23fffff 64bit pref] [ 0.479994] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.480001] pci 0000:00:1c.3: bridge window [mem 0xd2400000-0xd24fffff] [ 0.480093] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.480106] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.480107] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.480109] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.480111] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.480112] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.480114] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.480116] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.480117] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.480152] pci_bus 0000:00: on NUMA node 0 [ 0.480329] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.480381] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.480430] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.480479] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.480527] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.480576] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.480625] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 *6 7 10 12 14 15) [ 0.480674] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.480824] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) [ 0.480828] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.480832] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.480872] PCI host bridge to bus 0000:ff [ 0.480874] pci_bus 0000:ff: root bus resource [bus ff] [ 0.480879] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000 [ 0.480927] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 [ 0.480976] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 [ 0.481018] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 [ 0.481060] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 [ 0.481101] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 [ 0.481151] pci_bus 0000:ff: on NUMA node 0 [ 0.481523] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.481637] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.481640] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.481645] vgaarb: loaded [ 0.481647] vgaarb: bridge control possible 0000:00:02.0 [ 0.481771] PCI: Using ACPI for IRQ routing [ 0.491573] PCI: pci_cache_line_size set to 64 bytes [ 0.491627] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.491629] e820: reserve RAM buffer [mem 0xb70d0000-0xb7ffffff] [ 0.491747] NetLabel: Initializing [ 0.491749] NetLabel: domain hash size = 128 [ 0.491749] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.491762] NetLabel: unlabeled traffic allowed by default [ 0.491877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.491882] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.493915] clocksource: Switched to clocksource hpet [ 0.500269] VFS: Disk quotas dquot_6.6.0 [ 0.500294] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.502471] pnp: PnP ACPI init [ 0.502715] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.502717] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.502719] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.502721] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.502723] system 00:00: [mem 0xd4800000-0xd4800fff] has been reserved [ 0.502725] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved [ 0.502727] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.502728] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.502731] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved [ 0.502733] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.502738] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.503018] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.503109] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.503113] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.503156] system 00:03: [io 0x1000-0x100f] has been reserved [ 0.503158] system 00:03: [io 0xffff] has been reserved [ 0.503160] system 00:03: [io 0xffff] has been reserved [ 0.503162] system 00:03: [io 0x0400-0x047f] could not be reserved [ 0.503164] system 00:03: [io 0x0500-0x053f] has been reserved [ 0.503167] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.503210] system 00:04: [io 0x0680-0x06ff] has been reserved [ 0.503212] system 00:04: [io 0x01e0-0x01e7] has been reserved [ 0.503214] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.503242] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.503267] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.503290] pnp 00:07: Plug and Play ACPI device, IDs TOS0100 PNP0f13 (active) [ 0.503410] pnp: PnP ACPI: found 8 devices [ 0.507965] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.507985] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.507988] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.507999] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.508001] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.508021] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.508023] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 0.508038] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.508040] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.508042] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.508044] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.508046] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.508048] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.508050] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.508051] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.508053] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.508055] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.508057] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.508059] pci 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.508067] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd4900000-0xd4afffff 64bit pref] [ 0.508072] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4b00000-0xd4cfffff 64bit pref] [ 0.508077] pci 0000:00:1c.3: BAR 15: assigned [mem 0xd4d00000-0xd4efffff 64bit pref] [ 0.508080] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.508082] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff] [ 0.508084] pci 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff] [ 0.508088] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.508091] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.508097] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 0.508102] pci 0000:00:1c.0: bridge window [mem 0xd4900000-0xd4afffff 64bit pref] [ 0.508109] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.508112] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.508118] pci 0000:00:1c.1: bridge window [mem 0xd4500000-0xd45fffff] [ 0.508123] pci 0000:00:1c.1: bridge window [mem 0xd4b00000-0xd4cfffff 64bit pref] [ 0.508130] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.508133] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.508139] pci 0000:00:1c.2: bridge window [mem 0xd2500000-0xd44fffff] [ 0.508144] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd23fffff 64bit pref] [ 0.508151] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.508154] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.508160] pci 0000:00:1c.3: bridge window [mem 0xd2400000-0xd24fffff] [ 0.508164] pci 0000:00:1c.3: bridge window [mem 0xd4d00000-0xd4efffff 64bit pref] [ 0.508173] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.508187] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.508189] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.508191] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.508192] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.508194] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.508196] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.508197] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.508199] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfeafffff window] [ 0.508201] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.508202] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff] [ 0.508204] pci_bus 0000:01: resource 2 [mem 0xd4900000-0xd4afffff 64bit pref] [ 0.508206] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.508207] pci_bus 0000:02: resource 1 [mem 0xd4500000-0xd45fffff] [ 0.508209] pci_bus 0000:02: resource 2 [mem 0xd4b00000-0xd4cfffff 64bit pref] [ 0.508211] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.508212] pci_bus 0000:03: resource 1 [mem 0xd2500000-0xd44fffff] [ 0.508214] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd23fffff 64bit pref] [ 0.508216] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] [ 0.508217] pci_bus 0000:05: resource 1 [mem 0xd2400000-0xd24fffff] [ 0.508219] pci_bus 0000:05: resource 2 [mem 0xd4d00000-0xd4efffff 64bit pref] [ 0.508221] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.508222] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.508224] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.508226] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.508227] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.508229] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.508230] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.508232] pci_bus 0000:06: resource 11 [mem 0xc0000000-0xfeafffff window] [ 0.508261] NET: Registered protocol family 2 [ 0.508448] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.508510] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.508622] TCP: Hash tables configured (established 32768 bind 32768) [ 0.508654] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.508670] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.508731] NET: Registered protocol family 1 [ 0.508750] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.509328] PCI: CLS 64 bytes, default 64 [ 0.509384] Unpacking initramfs... [ 0.612706] Freeing initrd memory: 6832K (ffff880037297000 - ffff880037943000) [ 0.613638] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.613642] software IO TLB [mem 0xb30d0000-0xb70d0000] (64MB) mapped at [ffff8800b30d0000-ffff8800b70cffff] [ 0.613863] Scanning for low memory corruption every 60 seconds [ 0.614215] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.614551] Initialise system trusted keyring [ 0.614666] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 0.616162] zbud: loaded [ 0.616446] Key type big_key registered [ 0.616861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.616922] io scheduler noop registered [ 0.616925] io scheduler deadline registered [ 0.616959] io scheduler cfq registered [ 0.617003] io scheduler bfq registered (default) [ 0.617005] BFQ I/O-scheduler: v7r11 [ 0.617789] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.617796] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.617851] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.618304] Linux agpgart interface v0.103 [ 0.618357] intel_idle: MWAIT substates: 0x1120 [ 0.618359] intel_idle: v0.4.1 model 0x25 [ 0.618495] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.618550] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.618554] ACPI: Power Button [PWRB] [ 0.618591] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.618613] ACPI: Lid Switch [LID] [ 0.618650] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.618652] ACPI: Power Button [PWRF] [ 0.618864] GHES: HEST is not enabled! [ 0.618876] [drm] Initialized drm 1.1.0 20060810 [ 0.619382] [drm:intel_detect_pch] Found Ibex Peak PCH [ 0.619386] [drm:get_allowed_dc_mask] Allowed DC state mask 00 [ 0.619400] [drm:i915_dump_device_info] i915 device info: gen=5, pciid=0x0046 rev=0x02 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug, [ 0.619410] [drm:intel_device_info_runtime_init] slice total: 0 [ 0.619412] [drm:intel_device_info_runtime_init] subslice total: 0 [ 0.619413] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 0.619414] [drm:intel_device_info_runtime_init] EU total: 0 [ 0.619415] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 0.619416] [drm:intel_device_info_runtime_init] has slice power gating: n [ 0.619417] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 0.619418] [drm:intel_device_info_runtime_init] has EU power gating: n [ 0.619420] [drm:intel_device_info_runtime_init] ppgtt mode: 0 [ 0.619423] pci 0000:00:00.0: Intel HD Graphics Chipset [ 0.619437] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.619983] pci 0000:00:00.0: detected 65536K stolen memory [ 0.620061] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 0.620062] [drm] Memory usable by graphics device = 2048M [ 0.620063] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 0.620065] [drm:i915_ggtt_init_hw] GTT stolen size = 64M [ 0.620068] [drm] Replacing VGA console driver [ 0.622120] [drm:intel_opregion_setup] graphic opregion physical addr: 0xb7157018 [ 0.622126] [drm:intel_opregion_setup] Public ACPI methods supported [ 0.622127] [drm:intel_opregion_setup] SWSCI supported [ 0.628286] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00000021 [ 0.628291] [drm:intel_opregion_setup] ASLE supported [ 0.628294] [drm:intel_opregion_setup] ASLE extension supported [ 0.628299] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 0.628373] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.628376] [drm] Driver supports precise vblank timestamp query. [ 0.628379] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 0.628382] [drm:intel_bios_init] VBT signature "$VBT IRONLAKE-MOBILE", BDB version 156 [ 0.628385] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 0.628388] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 0.630508] [drm:parse_lfp_panel_data] Panel type: 3 (OpRegion) [ 0.630512] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 0.630517] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 0.630522] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 0.630524] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 0.630528] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 215 Hz, active high, min brightness 14, level 9 [ 0.630531] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 0.630535] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 0.630537] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 0.630540] [drm:parse_driver_features] DRRS State Enabled:0 [ 0.630543] [drm:parse_psr] No PSR BDB found. [ 0.630558] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 0.630565] [drm:intel_update_rawclk] rawclk rate: 125000 kHz [ 0.630570] [drm:intel_power_well_enable] enabling always-on [ 0.630812] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec) [ 0.630814] [drm:intel_print_wm_latency] Primary WM1 latency 10 (5.0 usec) [ 0.630815] [drm:intel_print_wm_latency] Primary WM2 latency 34 (17.0 usec) [ 0.630817] [drm:intel_print_wm_latency] Sprite WM0 latency 13 (1.3 usec) [ 0.630818] [drm:intel_print_wm_latency] Sprite WM1 latency 10 (5.0 usec) [ 0.630819] [drm:intel_print_wm_latency] Sprite WM2 latency 34 (17.0 usec) [ 0.630821] [drm:intel_print_wm_latency] Cursor WM0 latency 13 (1.3 usec) [ 0.630822] [drm:intel_print_wm_latency] Cursor WM1 latency 10 (5.0 usec) [ 0.630823] [drm:intel_print_wm_latency] Cursor WM2 latency 34 (17.0 usec) [ 0.630827] [drm:intel_modeset_init] 2 display pipes available. [ 0.630840] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz [ 0.630841] [drm:intel_update_max_cdclk] Max CD clock rate: 450000 kHz [ 0.630842] [drm:intel_update_max_cdclk] Max dotclock rate: 405000 kHz [ 0.630846] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.681963] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 0.697933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 0.697936] [drm:intel_lvds_init] using mode from VBT: [ 0.697938] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 0.697944] [drm:intel_lvds_init] detected single-link lvds configuration [ 0.697987] [drm:intel_panel_setup_backlight] Connector LVDS-1 backlight initialized, enabled, brightness 4539/4539 [ 0.698022] [drm:intel_crt_reset] crt adpa set to 0xf40000 [ 0.698026] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 0.698798] [drm:intel_sdvo_read_byte] i2c transfer returned -6 [ 0.698800] [drm:intel_sdvo_init] No SDVO device found on SDVOB [ 0.698820] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 0.698861] [drm:intel_dp_init_connector] Adding DP connector on port B [ 0.698886] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 0.698943] [drm:intel_dp_init_connector] Adding DP connector on port C [ 0.698963] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 0.698984] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 [ 0.699408] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled [ 0.699410] [drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled [ 0.699416] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1 [ 0.699421] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 [ 0.699426] [drm:intel_modeset_readout_hw_state] [ENCODER:33:LVDS-33] hw state readout: enabled, pipe A [ 0.699429] [drm:intel_modeset_readout_hw_state] [ENCODER:37:DAC-37] hw state readout: disabled, pipe A [ 0.699433] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: disabled, pipe A [ 0.699436] [drm:intel_modeset_readout_hw_state] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A [ 0.699439] [drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A [ 0.699442] [drm:intel_modeset_readout_hw_state] [ENCODER:47:TMDS-47] hw state readout: disabled, pipe A [ 0.699445] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:LVDS-1] hw state readout: enabled [ 0.699448] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:VGA-1] hw state readout: disabled [ 0.699451] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:HDMI-A-1] hw state readout: disabled [ 0.699454] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:DP-1] hw state readout: disabled [ 0.699457] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-2] hw state readout: disabled [ 0.699460] [drm:intel_modeset_readout_hw_state] [CONNECTOR:48:DP-2] hw state readout: disabled [ 0.699476] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff8800b1a01800 for pipe A [ 0.699477] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 0.699479] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 0.699481] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 1332041, gmch_n: 8388608, link_m: 148004, link_n: 524288, tu: 64 [ 0.699482] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.699484] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 0.699485] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.699486] [drm:intel_dump_pipe_config] requested mode: [ 0.699488] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76190 1366 1400 1512 1624 768 769 771 780 0x40 0xa [ 0.699490] [drm:intel_dump_pipe_config] adjusted mode: [ 0.699492] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76190 1366 1400 1512 1624 768 769 771 780 0x40 0xa [ 0.699494] [drm:intel_dump_crtc_timings] crtc timings: 76190 1366 1400 1512 1624 768 769 771 780, type: 0x40 flags: 0xa [ 0.699495] [drm:intel_dump_pipe_config] port clock: 76190 [ 0.699496] [drm:intel_dump_pipe_config] pipe src size: 1280x720 [ 0.699498] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 0.699499] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.699501] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05560300, enabled [ 0.699502] [drm:intel_dump_pipe_config] ips: 0 [ 0.699503] [drm:intel_dump_pipe_config] double wide: 0 [ 0.699504] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c08, fp1: 0x30d07 [ 0.699505] [drm:intel_dump_pipe_config] planes on this crtc [ 0.699507] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0 [ 0.699509] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 0.699510] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 0.699513] [drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config ffff8800b1a02800 for pipe B [ 0.699514] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 0.699515] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 0.699517] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.699518] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.699520] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 0.699521] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.699522] [drm:intel_dump_pipe_config] requested mode: [ 0.699525] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.699526] [drm:intel_dump_pipe_config] adjusted mode: [ 0.699528] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.699529] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 0.699530] [drm:intel_dump_pipe_config] port clock: 0 [ 0.699532] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 0.699533] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 0.699534] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.699536] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.699537] [drm:intel_dump_pipe_config] ips: 0 [ 0.699538] [drm:intel_dump_pipe_config] double wide: 0 [ 0.699539] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 0.699540] [drm:intel_dump_pipe_config] planes on this crtc [ 0.699542] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = 0 [ 0.699543] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = 0 [ 0.699545] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = 0 [ 0.699555] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1280x720@32, offset=0, pitch 5120, size 0x384000 [ 0.699557] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=384000 [ 0.699561] [drm:i915_pages_create_for_stolen] offset=0x0, size=3686400 [ 0.699566] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff8800b19fc000 [ 0.699594] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 384000 [ 0.699596] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [384000, 7ffff000] [ 0.701726] [drm:i915_gem_context_init] fake context support initialized [ 0.701730] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 0.701733] [drm:i915_pages_create_for_stolen] offset=0x384000, size=131072 [ 0.701755] [drm:init_status_page] render ring hws offset: 0x00385000 [ 0.701762] [drm:intel_init_pipe_control] render ring pipe control offset: 0x003a8000 [ 0.701764] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 0.701765] [drm:i915_pages_create_for_stolen] offset=0x3a4000, size=131072 [ 0.701769] [drm:init_status_page] bsd ring hws offset: 0x003a9000 [ 0.701799] [drm] RC6 disabled, disabling runtime PM support [ 0.701801] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz [ 0.701822] [drm:ironlake_enable_drps] fmax: 0, fmin: 7, fstart: 5 [ 0.702896] [drm:intel_backlight_device_register] Connector LVDS-1 backlight sysfs interface registered [ 0.702899] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 0.702900] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 0.702902] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 0.702910] [drm:intel_fbdev_init_bios] fb not wide enough for plane A (5464 vs 5120) [ 0.702911] [drm:intel_fbdev_init_bios] BIOS fb not suitable for all pipes, not using [ 0.702936] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] [ 0.702939] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1] [ 0.702941] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] status updated from unknown to connected [ 0.702944] [drm:intel_didl_outputs] 4 outputs detected [ 0.702950] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes : [ 0.702953] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 0.702955] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] [ 0.702957] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1 [ 0.702961] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 0.703009] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 0.704976] [drm:asle_set_backlight] bclp = 0x8000001e [ 0.704980] [drm:asle_set_backlight] updating opregion backlight 30/255 [ 0.704982] [drm:intel_panel_actually_set_backlight] set backlight PWM = 534 [ 0.705510] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 0.705544] [drm] Initialized i915 1.6.0 20160508 for 0000:00:02.0 on minor 0 [ 0.706339] rtc_cmos 00:05: RTC can wake from S4 [ 0.706631] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.706673] rtc_cmos 00:05: alarms up to one year, 242 bytes nvram, hpet irqs [ 0.706729] ledtrig-cpu: registered to indicate activity on CPUs [ 0.707945] NET: Registered protocol family 10 [ 0.708202] NET: Registered protocol family 17 [ 0.708679] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4 [ 0.708690] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4 [ 0.708694] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4 [ 0.708705] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4 [ 0.708875] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.709761] registered taskstats version 1 [ 0.709797] Loading compiled-in X.509 certificates [ 0.709852] zswap: loaded using pool lzo/zbud [ 0.710377] Btrfs loaded [ 0.710782] Magic number: 0:391:805 [ 0.710926] rtc_cmos 00:05: setting system clock to 2016-05-11 22:45:48 UTC (1463006748) [ 0.710990] PM: Checking hibernation image partition /dev/sda6 [ 0.712974] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 0.712976] [drm:intel_crt_detect] CRT not detected via hotplug [ 0.713187] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 0.713191] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 0.713757] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 0.713761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 0.713762] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 0.713763] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 0.714540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 0.714542] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 0.714543] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 0.714545] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] status updated from unknown to disconnected [ 0.714548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected [ 0.714550] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] [ 0.714552] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1] [ 0.801964] [drm:intel_hdmi_detect] HDMI live status down [ 0.802194] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 0.802199] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 0.802453] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 0.802459] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 0.802723] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 0.802728] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 0.802902] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 0.802923] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] status updated from unknown to disconnected [ 0.802927] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected [ 0.802931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] [ 0.802935] [drm:intel_dp_detect] [CONNECTOR:44:DP-1] [ 0.802942] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] status updated from unknown to disconnected [ 0.802946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected [ 0.802949] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 0.802953] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 0.812073] [drm:asle_set_backlight] bclp = 0x800000ff [ 0.812076] [drm:asle_set_backlight] updating opregion backlight 255/255 [ 0.812078] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4539 [ 0.890985] [drm:intel_hdmi_detect] HDMI live status down [ 0.891449] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 0.891451] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 0.891720] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 0.891725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 0.891916] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 0.891920] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 0.892128] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 0.892135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] status updated from unknown to disconnected [ 0.892139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 0.892143] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] [ 0.892147] [drm:intel_dp_detect] [CONNECTOR:48:DP-2] [ 0.892154] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] status updated from unknown to disconnected [ 0.892157] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected [ 0.892164] [drm:drm_setup_crtcs] [ 0.892169] [drm:drm_enable_connectors] connector 32 enabled? yes [ 0.892172] [drm:drm_enable_connectors] connector 36 enabled? no [ 0.892176] [drm:drm_enable_connectors] connector 39 enabled? no [ 0.892179] [drm:drm_enable_connectors] connector 44 enabled? no [ 0.892182] [drm:drm_enable_connectors] connector 46 enabled? no [ 0.892185] [drm:drm_enable_connectors] connector 48 enabled? no [ 0.892191] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1 [ 0.892194] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0 [ 0.892199] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:26]: 1366x768 [ 0.892203] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 0.892206] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 0.892209] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 0.892212] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 0.892215] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 0.892220] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 26 (0,0) [ 0.892226] [drm:intelfb_create] no BIOS fb, allocating a new one [ 0.892231] [drm:i915_gem_object_create_stolen] creating stolen object: size=408000 [ 0.892241] [drm:i915_pages_create_for_stolen] offset=0x3c4000, size=4227072 [ 0.893783] [drm:intelfb_create] allocated 1366x768 fb: 0x003cb000, bo ffff8800b1ab4000 [ 0.894063] fbcon: inteldrmfb (fb0) is primary device [ 0.894184] [drm:connected_sink_compute_bpp] [CONNECTOR:32:LVDS-1] checking for sink bpp constrains [ 0.894185] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 [ 0.894187] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) [ 0.894189] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 0.894190] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 0.894191] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88013372b000 for pipe A [ 0.894192] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 0.894193] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 0.894194] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2664082, gmch_n: 4194304, link_m: 148004, link_n: 524288, tu: 64 [ 0.894195] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.894196] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 0.894197] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.894197] [drm:intel_dump_pipe_config] requested mode: [ 0.894199] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 0.894200] [drm:intel_dump_pipe_config] adjusted mode: [ 0.894201] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 0.894203] [drm:intel_dump_crtc_timings] crtc timings: 76220 1366 1400 1512 1624 768 769 771 780, type: 0x8 flags: 0xa [ 0.894203] [drm:intel_dump_pipe_config] port clock: 76220 [ 0.894204] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 0.894205] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 0.894206] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.894206] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.894207] [drm:intel_dump_pipe_config] ips: 0 [ 0.894207] [drm:intel_dump_pipe_config] double wide: 0 [ 0.894208] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c08, fp1: 0x30d07 [ 0.894209] [drm:intel_dump_pipe_config] planes on this crtc [ 0.894211] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 0.894213] [drm:intel_dump_pipe_config] FB:50, fb = 1280x720 format = 0x34325258 [ 0.894213] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1280x720 dst (0, 0) 1280x720 [ 0.894214] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 0.894215] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 0.894219] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz [ 0.894229] [drm:ibx_get_dpll] CRTC:26 using pre-allocated PCH DPLL A [ 0.894230] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A [ 0.897573] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 0.897582] [drm:intel_disable_pipe] disabling pipe A [ 0.931442] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 26 [ 0.931447] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 0.931653] [drm:verify_encoder_state] [ENCODER:33:LVDS-33] [ 0.931654] [drm:verify_encoder_state] [ENCODER:37:DAC-37] [ 0.931657] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 0.931659] [drm:verify_encoder_state] [ENCODER:43:TMDS-43] [ 0.931661] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 0.931664] [drm:verify_encoder_state] [ENCODER:47:TMDS-47] [ 0.931666] [drm:intel_connector_verify_state] [CONNECTOR:36:VGA-1] [ 0.931668] [drm:intel_connector_verify_state] [CONNECTOR:39:HDMI-A-1] [ 0.931671] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-1] [ 0.931673] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2] [ 0.931675] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-2] [ 0.931678] [drm:verify_single_dpll_state] PCH DPLL A [ 0.931683] [drm:verify_single_dpll_state] PCH DPLL B [ 0.931692] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 0.932226] [drm:intel_enable_pipe] enabling pipe A [ 0.932541] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x700 [ 0.932542] [drm:ironlake_fdi_link_train] FDI train 1 done. [ 0.932698] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x600 [ 0.932699] [drm:ironlake_fdi_link_train] FDI train 2 done. [ 0.932699] [drm:ironlake_fdi_link_train] FDI train done [ 0.932700] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 1, on? 0) for crtc 26 [ 0.932701] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 1.287862] [drm:intel_panel_enable_backlight] pipe A [ 1.287867] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4539 [ 1.317470] [drm:intel_connector_verify_state] [CONNECTOR:32:LVDS-1] [ 1.317476] [drm:verify_crtc_state] [CRTC:26] [ 1.317498] [drm:verify_single_dpll_state] PCH DPLL A [ 1.317524] [drm:drm_fb_helper_hotplug_event] [ 1.317526] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] [ 1.317527] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1] [ 1.317532] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes : [ 1.317535] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 1.317537] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] [ 1.317538] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1 [ 1.317544] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 1.317545] [drm:intel_crt_detect] CRT not detected via hotplug [ 1.317828] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 1.317830] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 1.318112] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 1.318115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.318116] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.318118] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.318886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.318887] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.318888] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 1.318889] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected [ 1.318890] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] [ 1.318890] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1] [ 1.406962] [drm:intel_hdmi_detect] HDMI live status down [ 1.407205] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.407207] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.407427] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.407430] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.407704] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.407706] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.407899] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.407903] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected [ 1.407906] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] [ 1.407908] [drm:intel_dp_detect] [CONNECTOR:44:DP-1] [ 1.407913] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected [ 1.407914] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 1.407916] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 1.495954] [drm:intel_hdmi_detect] HDMI live status down [ 1.496197] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.496200] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.496413] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.496416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.496633] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.496635] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.496845] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.496849] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 1.496852] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] [ 1.496854] [drm:intel_dp_detect] [CONNECTOR:48:DP-2] [ 1.496859] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected [ 1.496862] [drm:drm_setup_crtcs] [ 1.496865] [drm:drm_enable_connectors] connector 32 enabled? yes [ 1.496867] [drm:drm_enable_connectors] connector 36 enabled? no [ 1.496884] [drm:drm_enable_connectors] connector 39 enabled? no [ 1.496886] [drm:drm_enable_connectors] connector 44 enabled? no [ 1.496887] [drm:drm_enable_connectors] connector 46 enabled? no [ 1.496889] [drm:drm_enable_connectors] connector 48 enabled? no [ 1.496892] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1 [ 1.496895] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0 [ 1.496898] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:26]: 1366x768 [ 1.496899] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 1.496901] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.496902] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.496904] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.496905] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.496908] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 26 (0,0) [ 1.499853] Console: switching to colour frame buffer device 170x48 [ 1.503154] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.512069] PM: Hibernation image not present or could not be loaded. [ 1.513325] Freeing unused kernel memory: 1108K (ffffffff81cf1000 - ffffffff81e06000) [ 1.513329] Write protecting the kernel read-only data: 12288k [ 1.513691] Freeing unused kernel memory: 728K (ffff88000174a000 - ffff880001800000) [ 1.517891] Freeing unused kernel memory: 1808K (ffff880001a3c000 - ffff880001c00000) [ 1.520359] random: systemd urandom read with 8 bits of entropy available [ 1.530949] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.531090] systemd[1]: Detected architecture x86-64. [ 1.531093] systemd[1]: Running in initial RAM disk. [ 1.531098] systemd[1]: Running with unpopulated /etc. [ 1.531126] systemd[1]: Initializing machine ID from random generator. [ 1.533117] systemd[1]: Populated /etc with preset unit settings. [ 1.538654] systemd[1]: Listening on Journal Socket. [ 1.538716] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.538761] systemd[1]: Listening on udev Control Socket. [ 1.539747] systemd[1]: Reached target Swap. [ 1.539827] systemd[1]: Listening on udev Kernel Socket. [ 1.539857] systemd[1]: Reached target Sockets. [ 1.540230] systemd[1]: Created slice system.slice. [ 1.540686] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.540715] systemd[1]: Reached target Slices. [ 1.540881] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. [ 1.541374] systemd[1]: Starting udev Coldplug all Devices... [ 1.541401] systemd[1]: Reached target Paths. [ 1.541831] systemd[1]: Starting Journal Service... [ 1.541886] systemd[1]: Reached target Timers. [ 1.544197] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.544976] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.547227] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.547792] systemd[1]: Starting udev Kernel Device Manager... [ 1.550309] systemd[1]: Started udev Kernel Device Manager. [ 1.585540] systemd[1]: Started udev Coldplug all Devices. [ 1.591092] systemd[1]: Starting Show Plymouth Boot Screen... [ 1.591443] systemd[1]: Started Journal Service. [ 1.593128] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.595409] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.595490] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.598664] [drm:i915_gem_open] [ 1.598736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] [ 1.598739] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1] [ 1.598747] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes : [ 1.598751] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 1.602583] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] [ 1.602591] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1 [ 1.602599] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 1.602600] [drm:intel_crt_detect] CRT not detected via hotplug [ 1.602773] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 1.602776] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 1.603161] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 1.603166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.603169] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.603171] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.603973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 1.603980] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.603982] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 1.603986] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected [ 1.604006] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] [ 1.604009] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1] [ 1.604016] ACPI: bus type USB registered [ 1.604053] usbcore: registered new interface driver usbfs [ 1.604067] usbcore: registered new interface driver hub [ 1.604103] usbcore: registered new device driver usb [ 1.604760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.606040] ehci-pci: EHCI PCI platform driver [ 1.606311] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.606320] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.606341] ehci-pci 0000:00:1a.0: debug port 2 [ 1.611332] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.611353] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4709000 [ 1.612246] SCSI subsystem initialized [ 1.614365] libata version 3.00 loaded. [ 1.615883] tsc: Refined TSC clocksource calibration: 2526.996 MHz [ 1.615887] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cd7cb7f7, max_idle_ns: 440795247826 ns [ 1.616898] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.617171] hub 1-0:1.0: USB hub found [ 1.617180] hub 1-0:1.0: 2 ports detected [ 1.617542] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.617549] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.617564] ehci-pci 0000:00:1d.0: debug port 2 [ 1.622246] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.622267] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4708000 [ 1.627894] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.628088] hub 2-0:1.0: USB hub found [ 1.628098] hub 2-0:1.0: 2 ports detected [ 1.628262] ahci 0000:00:1f.2: version 3.0 [ 1.629054] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.629059] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 1.631615] scsi host0: ahci [ 1.631975] scsi host1: ahci [ 1.632146] scsi host2: ahci [ 1.632300] scsi host3: ahci [ 1.632374] ata1: SATA max UDMA/133 abar m2048@0xd4707000 port 0xd4707100 irq 25 [ 1.632378] ata2: SATA max UDMA/133 abar m2048@0xd4707000 port 0xd4707180 irq 25 [ 1.632379] ata3: DUMMY [ 1.632380] ata4: DUMMY [ 1.640037] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.691975] [drm:intel_hdmi_detect] HDMI live status down [ 1.692195] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.692199] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.692461] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.692468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.692762] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.692766] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.692954] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.692964] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected [ 1.692999] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] [ 1.693006] [drm:intel_dp_detect] [CONNECTOR:44:DP-1] [ 1.693016] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected [ 1.693030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 1.693043] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 1.780949] [drm:intel_hdmi_detect] HDMI live status down [ 1.781176] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.781182] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.781474] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.781480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.781767] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.781771] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.781966] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.781975] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 1.781994] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] [ 1.781996] [drm:intel_dp_detect] [CONNECTOR:48:DP-2] [ 1.782003] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected [ 1.782028] [drm:drm_mode_addfb2] [FB:52] [ 1.782577] [drm:i915_gem_open] [ 1.918944] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.929981] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.936987] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.937032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.938003] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.938012] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._SDD] (Node ffff8801334b5230), AE_NOT_FOUND (20160108/psparse-542) [ 1.938031] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.938034] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._GTF] (Node ffff8801334b5258), AE_NOT_FOUND (20160108/psparse-542) [ 1.938470] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC64G, max UDMA/133 [ 1.938477] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.938810] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.938815] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._SDD] (Node ffff8801334b5348), AE_NOT_FOUND (20160108/psparse-542) [ 1.938832] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.938835] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._GTF] (Node ffff8801334b5370), AE_NOT_FOUND (20160108/psparse-542) [ 1.938842] ata2.00: ATAPI: MATSHITADVD-RAM UJ892ES, 1.20, max UDMA/100 [ 1.939618] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.939623] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._SDD] (Node ffff8801334b5230), AE_NOT_FOUND (20160108/psparse-542) [ 1.939638] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.939641] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._GTF] (Node ffff8801334b5258), AE_NOT_FOUND (20160108/psparse-542) [ 1.940140] ata1.00: configured for UDMA/133 [ 1.940636] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 C64G PQ: 0 ANSI: 5 [ 1.941451] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.941457] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._SDD] (Node ffff8801334b5348), AE_NOT_FOUND (20160108/psparse-542) [ 1.941474] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 1.941477] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._GTF] (Node ffff8801334b5370), AE_NOT_FOUND (20160108/psparse-542) [ 1.941485] ata2.00: configured for UDMA/100 [ 1.965398] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ892ES 1.20 PQ: 0 ANSI: 5 [ 1.979356] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.979408] sd 0:0:0:0: [sda] Write Protect is off [ 1.979413] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.979432] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.981424] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.981431] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.981620] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.034103] hub 1-1:1.0: USB hub found [ 2.034262] hub 1-1:1.0: 6 ports detected [ 2.045012] hub 2-1:1.0: USB hub found [ 2.045130] hub 2-1:1.0: 8 ports detected [ 2.308927] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 2.341721] sda: sda1 sda2 < sda5 sda6 > sda3 sda4 sda3: [ 2.342549] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.469903] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 2.603262] [drm:drm_mode_addfb2] [FB:52] [ 2.603296] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 2.603301] [drm:drm_mode_setcrtc] [CONNECTOR:32:LVDS-1] [ 2.616229] clocksource: Switched to clocksource tsc [ 2.619572] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 2.619583] [drm:drm_mode_setcrtc] [CONNECTOR:32:LVDS-1] [ 2.742279] BTRFS: device label linux-btrfs devid 1 transid 73109 /dev/sda4 [ 2.873142] random: nonblocking pool is initialized [ 2.972937] PM: Starting manual resume from disk [ 2.972942] PM: Hibernation image partition 8:6 present [ 2.972943] PM: Looking for hibernation image. [ 2.973260] PM: Image not found (code -22) [ 2.973267] PM: Hibernation image not present or could not be loaded. [ 3.198781] BTRFS info (device sda4): disk space caching is enabled [ 3.198787] BTRFS: has skinny extents [ 3.256617] BTRFS info (device sda4): bdev /dev/sda4 errs: wr 93, rd 7, flush 0, corrupt 0, gen 0 [ 4.904594] systemd-journald[74]: Received SIGTERM from PID 1 (systemd). [ 6.559105] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 6.960455] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.729307] BTRFS info (device sda4): enabling auto defrag [ 9.729317] BTRFS info (device sda4): force lzo compression [ 9.729322] BTRFS info (device sda4): disk space caching is enabled [ 12.910854] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.935027] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255) [ 12.935034] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.935038] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20160108/utaddress-255) [ 12.935041] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.935042] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20160108/utaddress-255) [ 12.935045] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.935046] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20160108/utaddress-255) [ 12.935049] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.935050] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.148764] ACPI: AC Adapter [ADP1] (on-line) [ 13.219244] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 13.219249] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.219251] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 13.219253] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 13.219254] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 13.219256] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 13.219258] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 13.316862] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff81894330) [ 13.317399] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 13.320760] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 13.321549] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 13.321581] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 13.321610] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 13.321637] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 13.367243] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 13.367616] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 13.434497] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 13.443615] tpm_tis 00:01: TPM is disabled/deactivated (0x7) [ 13.608073] toshiba_haps: Toshiba HDD Active Protection Sensor device [ 13.710668] toshiba_haps: HDD protection level set to: 2 [ 13.710733] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver [ 13.767364] [drm:do_gmbus_xfer] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 13.778609] ACPI: Battery Slot [BAT1] (battery present) [ 13.823524] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=4539/4539 [ 13.823529] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4539 [ 13.834326] [drm:do_gmbus_xfer] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 13.861262] thermal LNXTHERM:00: registered as thermal_zone0 [ 13.861265] ACPI: Thermal Zone [TZ01] (58 C) [ 13.901313] [drm:do_gmbus_xfer] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 13.949217] Intel(R) Wireless WiFi driver for Linux [ 13.949221] Copyright(c) 2003- 2015 Intel Corporation [ 13.949376] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 13.968315] [drm:do_gmbus_xfer] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 14.035346] [drm:do_gmbus_xfer] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 14.102343] [drm:do_gmbus_xfer] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 14.169342] [drm:do_gmbus_xfer] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 14.206059] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2 [ 14.236335] [drm:do_gmbus_xfer] GMBUS [i915 gmbus ssc] timed out, falling back to bit banging on pin 1 [ 14.252512] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 14.252515] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 14.252674] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 14.252832] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0051 r(1) [ 14.252835] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 14.253031] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0051 r(1) [ 14.253215] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0052 r(1) [ 14.253217] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 14.253382] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0052 r(1) [ 14.253539] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0053 r(1) [ 14.253542] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 14.253728] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0053 r(1) [ 14.253913] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0054 r(1) [ 14.253915] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 14.254078] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0054 r(1) [ 14.254233] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0055 r(1) [ 14.254236] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 14.254426] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0055 r(1) [ 14.254617] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0056 r(1) [ 14.254619] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 14.254782] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0056 r(1) [ 14.254937] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0057 r(1) [ 14.254939] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 14.255099] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0057 r(1) [ 14.271599] wmi: Mapper loaded [ 14.285874] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2 [ 14.305296] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 14.333363] usb 1-1.6: new full-speed USB device number 5 using ehci-pci [ 14.372296] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 14.382283] iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm [ 14.416178] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.23 [ 14.419072] input: Toshiba input device as /devices/virtual/input/input11 [ 14.420995] [drm:asle_set_backlight] bclp = 0x800000ff [ 14.420999] [drm:asle_set_backlight] updating opregion backlight 255/255 [ 14.421001] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4539 [ 14.437022] toshiba_acpi: Supported laptop features: hotkeys video-out fan touchpad accelerometer-axes usb-sleep-charge cooling-method [ 14.439292] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 14.506326] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 14.509989] systemd-journald[213]: Received request to flush runtime journal from PID 1 [ 14.573328] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 14.640346] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 14.659346] input: PC Speaker as /devices/platform/pcspkr/input/input13 [ 14.707300] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 14.708247] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 14.708250] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 14.708253] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 14.708256] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 [ 14.708330] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 14.774319] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3 [ 14.790527] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 14.790534] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.790747] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 14.790921] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0051 r(1) [ 14.790926] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.791126] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0051 r(1) [ 14.791277] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0052 r(1) [ 14.791279] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.791481] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0052 r(1) [ 14.791692] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0053 r(1) [ 14.791697] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.791897] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0053 r(1) [ 14.792090] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0054 r(1) [ 14.792091] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.792251] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0054 r(1) [ 14.792468] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0055 r(1) [ 14.792474] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.792668] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0055 r(1) [ 14.792869] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0056 r(1) [ 14.792872] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.793028] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0056 r(1) [ 14.793188] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0057 r(1) [ 14.793190] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 14.793402] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0057 r(1) [ 14.793606] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 14.793610] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 14.793774] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 14.793938] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0051 r(1) [ 14.793939] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 14.794124] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0051 r(1) [ 14.794274] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0052 r(1) [ 14.794275] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 14.794441] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0052 r(1) [ 14.794618] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0053 r(1) [ 14.794622] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 14.794817] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0053 r(1) [ 14.795004] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0054 r(1) [ 14.795006] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 14.795165] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0054 r(1) [ 14.795335] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0055 r(1) [ 14.795339] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 14.795536] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0055 r(1) [ 14.795730] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0056 r(1) [ 14.795734] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 14.795890] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0056 r(1) [ 14.796050] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0057 r(1) [ 14.796051] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 14.796237] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0057 r(1) [ 14.846321] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 14.856471] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 14.913310] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 14.980339] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 15.047300] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 15.121262] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 15.188302] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 15.222901] psmouse serio1: synaptics: queried max coordinates: x [..5646], y [..4606] [ 15.255291] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 15.270381] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400/0x0, board id: 0, fw id: 664027 [ 15.300596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 [ 15.322325] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 [ 15.340735] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.340741] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.343190] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.343194] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.345648] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.345652] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.348096] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.348100] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.350555] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.350559] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.353005] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.353009] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.355462] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.355466] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.357915] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.357920] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.360372] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.360377] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.362822] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.362825] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.365282] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.365285] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.367726] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.367729] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.370175] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.370178] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.372624] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.372627] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.375083] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.375087] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.377538] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.377544] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.379995] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.379999] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.382445] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.382449] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.384899] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.384902] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.387356] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.387360] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.389808] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.389812] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.392258] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.392261] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.397460] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.397473] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.397787] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 15.399936] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.399943] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.402403] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.402407] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.404866] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.404870] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.407320] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.407324] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.409773] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.409777] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.412228] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.412233] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.414695] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.414699] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.417148] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.417152] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.419609] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f [ 15.419614] [drm:drm_dp_i2c_do_msg] transaction failed: -110 [ 15.805335] iTCO_vendor_support: vendor-support=0 [ 15.819581] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 15.991993] mousedev: PS/2 mouse device common for all mice [ 16.135636] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 16.135689] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460) [ 16.135814] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.197965] Bluetooth: Core ver 2.21 [ 17.197991] NET: Registered protocol family 31 [ 17.197993] Bluetooth: HCI device and connection manager initialized [ 17.197999] Bluetooth: HCI socket layer initialized [ 17.198003] Bluetooth: L2CAP socket layer initialized [ 17.198009] Bluetooth: SCO socket layer initialized [ 17.380196] usbcore: registered new interface driver btusb [ 17.543631] media: Linux media interface: v0.10 [ 17.737621] Linux video capture interface: v2.00 [ 18.263844] uvcvideo: Found UVC 1.00 device 2SF001 (0bda:58f5) [ 18.298970] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized! [ 18.298976] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized! [ 18.298979] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized! [ 18.299087] input: 2SF001 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14 [ 18.299204] usbcore: registered new interface driver uvcvideo [ 18.299207] USB Video Class driver (1.1.1) [ 18.767962] Adding 4217852k swap on /dev/sda6. Priority:-1 extents:1 across:4217852k FS [ 20.849811] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.849815] Bluetooth: BNEP filters: protocol multicast [ 20.849820] Bluetooth: BNEP socket layer initialized [ 28.541743] fbcondecor: console 0 using theme 'arch-black' [ 28.577310] fbcondecor: switched decor state to 'on' on console 0 [ 28.610684] fbcondecor: console 1 using theme 'arch-black' [ 28.644469] fbcondecor: switched decor state to 'on' on console 1 [ 28.682464] fbcondecor: console 2 using theme 'arch-black' [ 28.716165] fbcondecor: switched decor state to 'on' on console 2 [ 28.748330] fbcondecor: console 3 using theme 'arch-black' [ 28.782230] fbcondecor: switched decor state to 'on' on console 3 [ 28.814278] fbcondecor: console 4 using theme 'arch-black' [ 28.856964] fbcondecor: switched decor state to 'on' on console 4 [ 28.889807] fbcondecor: console 5 using theme 'arch-black' [ 28.923157] fbcondecor: switched decor state to 'on' on console 5 [ 30.889412] [drm:i915_gem_open] [ 32.124275] [drm:i915_gem_open] [ 32.846001] [drm:drm_mode_addfb2] [FB:50] [ 32.846318] [drm:internal_framebuffer_create] could not create framebuffer [ 32.846322] [drm:internal_framebuffer_create] could not create framebuffer [ 32.846340] [drm:drm_mode_addfb2] [FB:50] [ 33.696527] zram: Added device: zram0 [ 33.696703] zram: Added device: zram1 [ 33.697060] zram: Added device: zram2 [ 33.697471] zram: Added device: zram3 [ 33.698077] zram0: detected capacity change from 0 to 192999424 [ 33.863528] [drm:drm_mode_addfb2] [FB:50] [ 34.233785] zram1: detected capacity change from 0 to 192999424 [ 34.239605] zram2: detected capacity change from 0 to 192999424 [ 34.247657] zram3: detected capacity change from 0 to 192999424 [ 34.258819] Adding 188472k swap on /dev/zram0. Priority:100 extents:1 across:188472k SSFS [ 34.258975] Adding 188472k swap on /dev/zram1. Priority:100 extents:1 across:188472k SSFS [ 34.259129] Adding 188472k swap on /dev/zram2. Priority:100 extents:1 across:188472k SSFS [ 34.259281] Adding 188472k swap on /dev/zram3. Priority:100 extents:1 across:188472k SSFS [ 34.511779] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 34.511941] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 34.518440] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 34.518537] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1 [ 34.727882] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 34.734379] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 34.734472] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1 [ 34.761176] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 34.761186] [drm:drm_mode_setcrtc] [CONNECTOR:32:LVDS-1] [ 34.810100] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 34.871046] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] [ 34.871055] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1] [ 34.871067] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes : [ 34.871074] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 34.871383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] [ 34.871388] [drm:intel_dp_detect] [CONNECTOR:44:DP-1] [ 34.871399] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected [ 34.871416] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] [ 34.871419] [drm:intel_dp_detect] [CONNECTOR:48:DP-2] [ 34.871425] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected [ 34.871433] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] [ 34.871437] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1] [ 34.959419] [drm:intel_hdmi_detect] HDMI live status down [ 34.959688] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 34.959693] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 34.959903] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 34.959909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 34.960114] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 34.960118] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 34.960330] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 34.960337] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected [ 34.960388] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 34.960394] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 35.048413] [drm:intel_hdmi_detect] HDMI live status down [ 35.048646] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 35.048652] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 35.048860] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 35.048866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 35.049039] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 35.049043] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 35.049204] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 35.049207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 35.049224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] [ 35.049226] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1 [ 35.049230] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 35.049232] [drm:intel_crt_detect] CRT not detected via hotplug [ 35.049411] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 35.049418] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 35.049589] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 35.049596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 35.049601] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 35.049607] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 35.050366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 35.050369] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 35.050370] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 35.050372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected [ 35.577639] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 37.283613] wlp2s0: authenticate with 58:2a:f7:9c:6f:30 [ 37.315370] wlp2s0: send auth to 58:2a:f7:9c:6f:30 (try 1/3) [ 37.317826] wlp2s0: authenticated [ 37.318254] wlp2s0: associate with 58:2a:f7:9c:6f:30 (try 1/3) [ 37.322281] wlp2s0: RX AssocResp from 58:2a:f7:9c:6f:30 (capab=0x431 status=0 aid=2) [ 37.324951] wlp2s0: associated [ 37.325024] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 43.087885] [drm:i915_gem_open] [ 43.940405] fuse init (API version 7.24) [ 56.498930] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] [ 56.498935] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1] [ 56.498943] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes : [ 56.498946] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 56.499049] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] [ 56.499051] [drm:intel_dp_detect] [CONNECTOR:44:DP-1] [ 56.499057] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected [ 56.499061] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] [ 56.499062] [drm:intel_dp_detect] [CONNECTOR:48:DP-2] [ 56.499066] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected [ 56.499069] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] [ 56.499071] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1] [ 56.586469] [drm:intel_hdmi_detect] HDMI live status down [ 56.586698] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 56.586704] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 56.586922] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 56.586928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 56.587094] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 56.587098] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 56.587259] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 56.587261] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected [ 56.587292] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 56.587294] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 56.674502] [drm:intel_hdmi_detect] HDMI live status down [ 56.674706] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 56.674709] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 56.674888] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 56.674896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 56.675120] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 56.675124] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 56.675348] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 56.675355] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 56.675421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] [ 56.675427] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1 [ 56.675434] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 56.675437] [drm:intel_crt_detect] CRT not detected via hotplug [ 56.675631] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 56.675633] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 56.675827] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 56.675832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 56.675836] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 56.675840] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 56.676640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 56.676645] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 56.676648] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 56.676653] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected [ 57.100735] [drm:i915_gem_open] [ 57.694126] [drm:drm_mode_addfb2] [FB:52] [ 57.720151] [drm:drm_mode_addfb2] [FB:56] [ 65.079010] Bluetooth: RFCOMM TTY layer initialized [ 65.079022] Bluetooth: RFCOMM socket layer initialized [ 65.079030] Bluetooth: RFCOMM ver 1.11 [ 74.376014] [drm:drm_mode_addfb2] [FB:58] [ 76.465709] ISO 9660 Extensions: RRIP_1991A [ 145.623617] wlp2s0: deauthenticating from 58:2a:f7:9c:6f:30 by local choice (Reason: 3=DEAUTH_LEAVING) [ 145.819036] PM: Hibernation mode set to 'platform' [ 145.819793] PM: Syncing filesystems ... done. [ 146.416153] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 146.418114] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 146.418118] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 146.418122] PM: Marking nosave pages: [mem 0xb70d0000-0xffffffff] [ 146.419035] PM: Basic memory bitmaps created [ 146.419117] PM: Preallocating image memory... done (allocated 313978 pages) [ 146.548959] PM: Allocated 1255912 kbytes in 0.12 seconds (10465.93 MB/s) [ 146.548962] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 146.550542] Suspending console(s) (use no_console_suspend to debug) [ 146.628996] [drm:connected_sink_compute_bpp] [CONNECTOR:32:LVDS-1] checking for sink bpp constrains [ 146.628998] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 [ 146.629002] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) [ 146.629006] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 146.629010] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 146.629014] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88008736a800 for pipe A [ 146.629015] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 146.629017] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 146.629021] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2664082, gmch_n: 4194304, link_m: 148004, link_n: 524288, tu: 64 [ 146.629024] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 146.629027] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 146.629028] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 146.629030] [drm:intel_dump_pipe_config] requested mode: [ 146.629035] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x0 0xa [ 146.629036] [drm:intel_dump_pipe_config] adjusted mode: [ 146.629041] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 146.629045] [drm:intel_dump_crtc_timings] crtc timings: 76220 1366 1400 1512 1624 768 769 771 780, type: 0x8 flags: 0xa [ 146.629047] [drm:intel_dump_pipe_config] port clock: 76220 [ 146.629049] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 146.629051] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 146.629053] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 146.629056] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 146.629057] [drm:intel_dump_pipe_config] ips: 0 [ 146.629059] [drm:intel_dump_pipe_config] double wide: 0 [ 146.629062] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c08, fp1: 0x10c08 [ 146.629063] [drm:intel_dump_pipe_config] planes on this crtc [ 146.629069] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 146.629072] [drm:intel_dump_pipe_config] FB:52, fb = 1366x768 format = 0x34325258 [ 146.629073] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 146.629076] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 146.629079] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 146.629087] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz [ 146.629117] [drm:ibx_get_dpll] CRTC:26 using pre-allocated PCH DPLL A [ 146.629119] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A [ 146.643025] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 146.643033] [drm:intel_disable_pipe] disabling pipe A [ 146.678216] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 26 [ 146.678224] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 146.678433] [drm:verify_encoder_state] [ENCODER:33:LVDS-33] [ 146.678434] [drm:verify_encoder_state] [ENCODER:37:DAC-37] [ 146.678438] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 146.678441] [drm:verify_encoder_state] [ENCODER:43:TMDS-43] [ 146.678444] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 146.678447] [drm:verify_encoder_state] [ENCODER:47:TMDS-47] [ 146.678450] [drm:intel_connector_verify_state] [CONNECTOR:36:VGA-1] [ 146.678454] [drm:intel_connector_verify_state] [CONNECTOR:39:HDMI-A-1] [ 146.678457] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-1] [ 146.678460] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2] [ 146.678462] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-2] [ 146.678465] [drm:verify_single_dpll_state] PCH DPLL A [ 146.678471] [drm:verify_single_dpll_state] PCH DPLL B [ 146.678483] [drm:intel_connector_verify_state] [CONNECTOR:32:LVDS-1] [ 146.678487] [drm:verify_crtc_state] [CRTC:26] [ 146.678491] [drm:verify_single_dpll_state] PCH DPLL A [ 146.678544] [drm:intel_power_well_disable] disabling always-on [ 146.679610] toshiba_haps: HDD protection level set to: 0 [ 146.680085] PM: freeze of devices complete after 129.543 msecs [ 146.691499] PM: late freeze of devices complete after 11.409 msecs [ 146.692874] PM: noirq freeze of devices complete after 1.371 msecs [ 146.693068] ACPI: Preparing to enter system sleep state S4 [ 146.693704] PM: Saving platform NVS memory [ 146.694453] Disabling non-boot CPUs ... [ 146.710333] Broke affinity for irq 16 [ 146.710347] Broke affinity for irq 27 [ 146.711393] smpboot: CPU 1 is now offline [ 146.728323] Broke affinity for irq 16 [ 146.728336] Broke affinity for irq 25 [ 146.728338] Broke affinity for irq 27 [ 146.729365] smpboot: CPU 2 is now offline [ 146.740302] Broke affinity for irq 1 [ 146.740311] Broke affinity for irq 9 [ 146.740315] Broke affinity for irq 12 [ 146.740320] Broke affinity for irq 16 [ 146.740330] Broke affinity for irq 24 [ 146.740332] Broke affinity for irq 25 [ 146.740333] Broke affinity for irq 27 [ 146.741354] smpboot: CPU 3 is now offline [ 146.742076] PM: Creating hibernation image: [ 146.899450] PM: Need to copy 312921 pages [ 146.899456] PM: Normal pages needed: 312921 + 1024, available pages: 666038 [ 146.742662] PM: Restoring platform NVS memory [ 146.743406] Enabling non-boot CPUs ... [ 146.743456] x86: Booting SMP configuration: [ 146.743457] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 146.746304] cache: parent cpu1 should not be sleeping [ 146.746522] CPU1 is up [ 146.746550] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 146.749091] cache: parent cpu2 should not be sleeping [ 146.749311] CPU2 is up [ 146.749333] smpboot: Booting Node 0 Processor 3 APIC 0x5 [ 146.751887] cache: parent cpu3 should not be sleeping [ 146.752098] CPU3 is up [ 146.754217] ACPI: Waking up from system sleep state S4 [ 146.765730] PM: noirq restore of devices complete after 10.867 msecs [ 146.767784] [drm:intel_power_well_enable] enabling always-on [ 146.767873] PM: early restore of devices complete after 2.121 msecs [ 146.810027] usb usb1: root hub lost power or was reset [ 146.814227] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 146.814341] usb usb2: root hub lost power or was reset [ 146.818908] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 146.818960] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio. [ 146.820580] sd 0:0:0:0: [sda] Starting disk [ 146.864843] [drm:intel_opregion_setup] graphic opregion physical addr: 0xb7157018 [ 146.864862] [drm:intel_opregion_setup] Public ACPI methods supported [ 146.864863] [drm:intel_opregion_setup] SWSCI supported [ 146.871169] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00000021 [ 146.871171] [drm:intel_opregion_setup] ASLE supported [ 146.871172] [drm:intel_opregion_setup] ASLE extension supported [ 146.871175] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 146.871180] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 [ 146.871190] [drm:intel_crt_reset] crt adpa set to 0xf40000 [ 146.871248] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz [ 146.871271] [drm:ironlake_enable_drps] fmax: 0, fmin: 7, fstart: 5 [ 146.872325] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled [ 146.872327] [drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled [ 146.872332] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000000, on 0 [ 146.872337] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 [ 146.872341] [drm:intel_modeset_readout_hw_state] [ENCODER:33:LVDS-33] hw state readout: disabled, pipe A [ 146.872343] [drm:intel_modeset_readout_hw_state] [ENCODER:37:DAC-37] hw state readout: disabled, pipe A [ 146.872346] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: disabled, pipe A [ 146.872349] [drm:intel_modeset_readout_hw_state] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A [ 146.872351] [drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A [ 146.872354] [drm:intel_modeset_readout_hw_state] [ENCODER:47:TMDS-47] hw state readout: disabled, pipe A [ 146.872357] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:LVDS-1] hw state readout: disabled [ 146.872359] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:VGA-1] hw state readout: disabled [ 146.872362] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:HDMI-A-1] hw state readout: disabled [ 146.872365] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:DP-1] hw state readout: disabled [ 146.872368] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-2] hw state readout: disabled [ 146.872370] [drm:intel_modeset_readout_hw_state] [CONNECTOR:48:DP-2] hw state readout: disabled [ 146.872373] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff88008736a800 for pipe A [ 146.872374] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 146.872375] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 146.872376] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 146.872377] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 146.872378] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 146.872378] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 146.872379] [drm:intel_dump_pipe_config] requested mode: [ 146.872381] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 146.872381] [drm:intel_dump_pipe_config] adjusted mode: [ 146.872383] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 146.872384] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 146.872385] [drm:intel_dump_pipe_config] port clock: 0 [ 146.872385] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 146.872386] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 146.872387] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 146.872388] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 146.872388] [drm:intel_dump_pipe_config] ips: 0 [ 146.872389] [drm:intel_dump_pipe_config] double wide: 0 [ 146.872390] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 146.872390] [drm:intel_dump_pipe_config] planes on this crtc [ 146.872393] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 146.872395] [drm:intel_dump_pipe_config] FB:52, fb = 1366x768 format = 0x34325258 [ 146.872395] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 146.872397] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 146.872398] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 146.872400] [drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config ffff88013372c000 for pipe B [ 146.872400] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 146.872401] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 146.872402] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 146.872403] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 146.872404] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 146.872405] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 146.872405] [drm:intel_dump_pipe_config] requested mode: [ 146.872407] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 146.872407] [drm:intel_dump_pipe_config] adjusted mode: [ 146.872409] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 146.872410] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 146.872411] [drm:intel_dump_pipe_config] port clock: 0 [ 146.872411] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 146.872412] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 146.872413] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 146.872414] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 146.872414] [drm:intel_dump_pipe_config] ips: 0 [ 146.872415] [drm:intel_dump_pipe_config] double wide: 0 [ 146.872416] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 146.872416] [drm:intel_dump_pipe_config] planes on this crtc [ 146.872417] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = 0 [ 146.872419] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = 0 [ 146.872420] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = 0 [ 146.872424] [drm:intel_power_well_disable] disabling always-on [ 146.872425] [drm:intel_power_well_enable] enabling always-on [ 146.872426] [drm:intel_power_well_disable] disabling always-on [ 146.872436] [drm:connected_sink_compute_bpp] [CONNECTOR:32:LVDS-1] checking for sink bpp constrains [ 146.872437] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 [ 146.872439] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) [ 146.872441] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 146.872442] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 146.872443] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880087368800 for pipe A [ 146.872444] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 146.872445] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 146.872446] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2664082, gmch_n: 4194304, link_m: 148004, link_n: 524288, tu: 64 [ 146.872447] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 146.872448] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 146.872449] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 146.872449] [drm:intel_dump_pipe_config] requested mode: [ 146.872451] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x0 0xa [ 146.872451] [drm:intel_dump_pipe_config] adjusted mode: [ 146.872453] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 146.872454] [drm:intel_dump_crtc_timings] crtc timings: 76220 1366 1400 1512 1624 768 769 771 780, type: 0x8 flags: 0xa [ 146.872455] [drm:intel_dump_pipe_config] port clock: 76220 [ 146.872456] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 146.872457] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 146.872457] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 146.872458] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 146.872459] [drm:intel_dump_pipe_config] ips: 0 [ 146.872459] [drm:intel_dump_pipe_config] double wide: 0 [ 146.872460] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c08, fp1: 0x10c08 [ 146.872460] [drm:intel_dump_pipe_config] planes on this crtc [ 146.872462] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 146.872464] [drm:intel_dump_pipe_config] FB:52, fb = 1366x768 format = 0x34325258 [ 146.872464] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 146.872465] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 146.872466] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 146.872472] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz [ 146.872483] [drm:ibx_get_dpll] CRTC:26 using pre-allocated PCH DPLL A [ 146.872484] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A [ 146.872497] [drm:intel_power_well_enable] enabling always-on [ 146.872501] [drm:verify_encoder_state] [ENCODER:33:LVDS-33] [ 146.872502] [drm:verify_encoder_state] [ENCODER:37:DAC-37] [ 146.872504] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 146.872507] [drm:verify_encoder_state] [ENCODER:43:TMDS-43] [ 146.872509] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 146.872511] [drm:verify_encoder_state] [ENCODER:47:TMDS-47] [ 146.872514] [drm:intel_connector_verify_state] [CONNECTOR:36:VGA-1] [ 146.872516] [drm:intel_connector_verify_state] [CONNECTOR:39:HDMI-A-1] [ 146.872518] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-1] [ 146.872521] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2] [ 146.872523] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-2] [ 146.872526] [drm:verify_single_dpll_state] PCH DPLL A [ 146.872530] [drm:verify_single_dpll_state] PCH DPLL B [ 146.872540] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 146.873087] [drm:intel_enable_pipe] enabling pipe A [ 146.873402] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x100 [ 146.873403] [drm:ironlake_fdi_link_train] FDI train 1 done. [ 146.873559] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x600 [ 146.873559] [drm:ironlake_fdi_link_train] FDI train 2 done. [ 146.873560] [drm:ironlake_fdi_link_train] FDI train done [ 146.873561] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 1, on? 0) for crtc 26 [ 146.873562] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 146.921080] toshiba_haps: HDD protection level set to: 2 [ 147.030738] tpm_tis 00:01: TPM is disabled/deactivated (0x7) [ 147.030748] rtc_cmos 00:05: System wakeup disabled by ACPI [ 147.122746] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 147.124045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 147.124554] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 147.124956] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 147.124960] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._SDD] (Node ffff8801334b5230), AE_NOT_FOUND (20160108/psparse-542) [ 147.124973] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 147.124976] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._GTF] (Node ffff8801334b5258), AE_NOT_FOUND (20160108/psparse-542) [ 147.126592] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 147.126601] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._SDD] (Node ffff8801334b5348), AE_NOT_FOUND (20160108/psparse-542) [ 147.126616] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 147.126619] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._GTF] (Node ffff8801334b5370), AE_NOT_FOUND (20160108/psparse-542) [ 147.126698] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 147.126702] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._SDD] (Node ffff8801334b5230), AE_NOT_FOUND (20160108/psparse-542) [ 147.126713] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 147.126716] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._GTF] (Node ffff8801334b5258), AE_NOT_FOUND (20160108/psparse-542) [ 147.127141] ata1.00: configured for UDMA/133 [ 147.129577] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 147.129580] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._SDD] (Node ffff8801334b5348), AE_NOT_FOUND (20160108/psparse-542) [ 147.129592] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 147.129595] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._GTF] (Node ffff8801334b5370), AE_NOT_FOUND (20160108/psparse-542) [ 147.129600] ata2.00: configured for UDMA/100 [ 147.133706] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 147.215790] [drm:intel_panel_enable_backlight] pipe A [ 147.215795] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4539 [ 147.241858] [drm:intel_connector_verify_state] [CONNECTOR:32:LVDS-1] [ 147.241863] [drm:verify_crtc_state] [CRTC:26] [ 147.241887] [drm:verify_single_dpll_state] PCH DPLL A [ 147.241894] [drm:verify_crtc_state] [CRTC:30] [ 147.241914] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=0 [ 147.241917] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 147.251991] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 147.251993] [drm:intel_crt_detect] CRT not detected via hotplug [ 147.252161] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 147.252163] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 147.252319] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 147.252322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 147.252324] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 147.252326] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 147.253041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 147.253042] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 147.253043] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 147.253044] [drm:drm_helper_hpd_irq_event] [CONNECTOR:36:VGA-1] status updated from disconnected to disconnected [ 147.253045] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1] [ 147.340673] [drm:intel_hdmi_detect] HDMI live status down [ 147.340861] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 147.340864] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 147.341067] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 147.341070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 147.341273] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 147.341275] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 147.341471] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 147.341476] [drm:drm_helper_hpd_irq_event] [CONNECTOR:39:HDMI-A-1] status updated from disconnected to disconnected [ 147.341478] [drm:intel_dp_detect] [CONNECTOR:44:DP-1] [ 147.341484] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:DP-1] status updated from disconnected to disconnected [ 147.341486] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 147.428717] [drm:intel_hdmi_detect] HDMI live status down [ 147.428921] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 147.428924] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 147.429120] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 147.429124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 147.429327] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 147.429329] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 147.429529] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 147.429534] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:HDMI-A-2] status updated from disconnected to disconnected [ 147.429536] [drm:intel_dp_detect] [CONNECTOR:48:DP-2] [ 147.429542] [drm:drm_helper_hpd_irq_event] [CONNECTOR:48:DP-2] status updated from disconnected to disconnected [ 147.429577] [drm:intel_didl_outputs] 4 outputs detected [ 147.524623] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci [ 147.682679] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci [ 147.840643] usb 1-1.6: reset full-speed USB device number 5 using ehci-pci [ 147.929488] PM: restore of devices complete after 1119.664 msecs [ 147.929692] usb 1-1.6:1.0: rebind failed: -517 [ 147.929694] usb 1-1.6:1.1: rebind failed: -517 [ 147.929831] PM: Image restored successfully. [ 147.929852] PM: Basic memory bitmaps freed [ 147.929858] Restarting tasks ... done. [ 147.943216] video LNXVIDEO:00: Restoring backlight state [ 147.945271] [drm:asle_set_backlight] bclp = 0x800000ff [ 147.945277] [drm:asle_set_backlight] updating opregion backlight 255/255 [ 147.945289] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4539 [ 147.955782] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 147.956243] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 147.962785] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 147.962883] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1 [ 148.017361] psmouse serio1: synaptics: queried max coordinates: x [..5646], y [..4606] [ 148.171520] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 148.178016] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 148.178112] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1 [ 148.253571] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 148.291871] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 148.554001] VFS: busy inodes on changed media or resized disk sr0 [ 150.020035] wlp2s0: authenticate with 58:2a:f7:9c:6f:30 [ 150.025001] wlp2s0: send auth to 58:2a:f7:9c:6f:30 (try 1/3) [ 150.027546] wlp2s0: authenticated [ 150.028575] wlp2s0: associate with 58:2a:f7:9c:6f:30 (try 1/3) [ 150.032713] wlp2s0: RX AssocResp from 58:2a:f7:9c:6f:30 (capab=0x431 status=0 aid=2) [ 150.035250] wlp2s0: associated [ 150.035325] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 201.343940] wlp2s0: deauthenticating from 58:2a:f7:9c:6f:30 by local choice (Reason: 3=DEAUTH_LEAVING) [ 201.434911] PM: Hibernation mode set to 'platform' [ 201.436191] PM: Syncing filesystems ... done. [ 202.478471] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 202.480890] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 202.480895] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 202.480901] PM: Marking nosave pages: [mem 0xb70d0000-0xffffffff] [ 202.482322] PM: Basic memory bitmaps created [ 202.482421] PM: Preallocating image memory... done (allocated 316192 pages) [ 202.635354] PM: Allocated 1264768 kbytes in 0.15 seconds (8431.78 MB/s) [ 202.635357] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 202.636938] Suspending console(s) (use no_console_suspend to debug) [ 202.722089] [drm:connected_sink_compute_bpp] [CONNECTOR:32:LVDS-1] checking for sink bpp constrains [ 202.722092] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 [ 202.722096] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) [ 202.722118] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 202.722120] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 202.722123] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8800ac027800 for pipe A [ 202.722124] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 202.722125] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 202.722127] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2664082, gmch_n: 4194304, link_m: 148004, link_n: 524288, tu: 64 [ 202.722129] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 202.722131] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 202.722132] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 202.722133] [drm:intel_dump_pipe_config] requested mode: [ 202.722137] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x0 0xa [ 202.722138] [drm:intel_dump_pipe_config] adjusted mode: [ 202.722140] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 202.722143] [drm:intel_dump_crtc_timings] crtc timings: 76220 1366 1400 1512 1624 768 769 771 780, type: 0x8 flags: 0xa [ 202.722144] [drm:intel_dump_pipe_config] port clock: 76220 [ 202.722145] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 202.722147] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 202.722148] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 202.722150] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 202.722151] [drm:intel_dump_pipe_config] ips: 0 [ 202.722151] [drm:intel_dump_pipe_config] double wide: 0 [ 202.722154] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c08, fp1: 0x10c08 [ 202.722154] [drm:intel_dump_pipe_config] planes on this crtc [ 202.722158] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 202.722161] [drm:intel_dump_pipe_config] FB:52, fb = 1366x768 format = 0x34325258 [ 202.722161] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 202.722163] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 202.722165] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 202.722173] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz [ 202.722192] [drm:ibx_get_dpll] CRTC:26 using pre-allocated PCH DPLL A [ 202.722193] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A [ 202.732532] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 202.732541] [drm:intel_disable_pipe] disabling pipe A [ 202.766073] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 26 [ 202.766080] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 202.766288] [drm:verify_encoder_state] [ENCODER:33:LVDS-33] [ 202.766290] [drm:verify_encoder_state] [ENCODER:37:DAC-37] [ 202.766293] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 202.766296] [drm:verify_encoder_state] [ENCODER:43:TMDS-43] [ 202.766300] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 202.766303] [drm:verify_encoder_state] [ENCODER:47:TMDS-47] [ 202.766306] [drm:intel_connector_verify_state] [CONNECTOR:36:VGA-1] [ 202.766309] [drm:intel_connector_verify_state] [CONNECTOR:39:HDMI-A-1] [ 202.766312] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-1] [ 202.766315] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2] [ 202.766318] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-2] [ 202.766321] [drm:verify_single_dpll_state] PCH DPLL A [ 202.766328] [drm:verify_single_dpll_state] PCH DPLL B [ 202.766340] [drm:intel_connector_verify_state] [CONNECTOR:32:LVDS-1] [ 202.766344] [drm:verify_crtc_state] [CRTC:26] [ 202.766348] [drm:verify_single_dpll_state] PCH DPLL A [ 202.766399] [drm:intel_power_well_disable] disabling always-on [ 202.772598] toshiba_haps: HDD protection level set to: 0 [ 202.773050] PM: freeze of devices complete after 136.114 msecs [ 202.784301] PM: late freeze of devices complete after 11.247 msecs [ 202.785687] PM: noirq freeze of devices complete after 1.383 msecs [ 202.785883] ACPI: Preparing to enter system sleep state S4 [ 202.786389] PM: Saving platform NVS memory [ 202.787140] Disabling non-boot CPUs ... [ 202.800169] Broke affinity for irq 16 [ 202.800177] Broke affinity for irq 23 [ 202.800182] Broke affinity for irq 27 [ 202.801215] smpboot: CPU 1 is now offline [ 202.817162] Broke affinity for irq 16 [ 202.817171] Broke affinity for irq 23 [ 202.817176] Broke affinity for irq 25 [ 202.817177] Broke affinity for irq 27 [ 202.818206] smpboot: CPU 2 is now offline [ 202.829170] Broke affinity for irq 1 [ 202.829181] Broke affinity for irq 9 [ 202.829187] Broke affinity for irq 12 [ 202.829193] Broke affinity for irq 16 [ 202.829203] Broke affinity for irq 23 [ 202.829208] Broke affinity for irq 24 [ 202.829210] Broke affinity for irq 25 [ 202.829212] Broke affinity for irq 27 [ 202.830254] smpboot: CPU 3 is now offline [ 202.831079] PM: Creating hibernation image: [ 202.987523] PM: Need to copy 315140 pages [ 202.987529] PM: Normal pages needed: 315140 + 1024, available pages: 663822 [ 202.831663] PM: Restoring platform NVS memory [ 202.832386] Enabling non-boot CPUs ... [ 202.832438] x86: Booting SMP configuration: [ 202.832439] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 202.835297] cache: parent cpu1 should not be sleeping [ 202.835558] CPU1 is up [ 202.835581] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 202.838136] cache: parent cpu2 should not be sleeping [ 202.838344] CPU2 is up [ 202.838366] smpboot: Booting Node 0 Processor 3 APIC 0x5 [ 202.840832] cache: parent cpu3 should not be sleeping [ 202.841044] CPU3 is up [ 202.843184] ACPI: Waking up from system sleep state S4 [ 202.854566] PM: noirq restore of devices complete after 10.755 msecs [ 202.856621] [drm:intel_power_well_enable] enabling always-on [ 202.856799] PM: early restore of devices complete after 2.210 msecs [ 202.899179] usb usb1: root hub lost power or was reset [ 202.903116] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 202.903142] usb usb2: root hub lost power or was reset [ 202.907033] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 202.907085] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio. [ 202.908033] sd 0:0:0:0: [sda] Starting disk [ 202.953169] [drm:intel_opregion_setup] graphic opregion physical addr: 0xb7157018 [ 202.953189] [drm:intel_opregion_setup] Public ACPI methods supported [ 202.953189] [drm:intel_opregion_setup] SWSCI supported [ 202.959398] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00000021 [ 202.959400] [drm:intel_opregion_setup] ASLE supported [ 202.959402] [drm:intel_opregion_setup] ASLE extension supported [ 202.959404] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 202.959409] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 [ 202.959419] [drm:intel_crt_reset] crt adpa set to 0xf40000 [ 202.959475] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz [ 202.959522] [drm:ironlake_enable_drps] fmax: 0, fmin: 7, fstart: 5 [ 202.960561] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled [ 202.960563] [drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled [ 202.960573] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000000, on 0 [ 202.960578] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 [ 202.960581] [drm:intel_modeset_readout_hw_state] [ENCODER:33:LVDS-33] hw state readout: disabled, pipe A [ 202.960584] [drm:intel_modeset_readout_hw_state] [ENCODER:37:DAC-37] hw state readout: disabled, pipe A [ 202.960587] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: disabled, pipe A [ 202.960589] [drm:intel_modeset_readout_hw_state] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A [ 202.960592] [drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A [ 202.960594] [drm:intel_modeset_readout_hw_state] [ENCODER:47:TMDS-47] hw state readout: disabled, pipe A [ 202.960597] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:LVDS-1] hw state readout: disabled [ 202.960600] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:VGA-1] hw state readout: disabled [ 202.960603] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:HDMI-A-1] hw state readout: disabled [ 202.960605] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:DP-1] hw state readout: disabled [ 202.960608] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-2] hw state readout: disabled [ 202.960611] [drm:intel_modeset_readout_hw_state] [CONNECTOR:48:DP-2] hw state readout: disabled [ 202.960614] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff8800ac027800 for pipe A [ 202.960615] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 202.960615] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 202.960616] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 202.960617] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 202.960619] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 202.960619] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 202.960620] [drm:intel_dump_pipe_config] requested mode: [ 202.960622] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 202.960622] [drm:intel_dump_pipe_config] adjusted mode: [ 202.960624] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 202.960625] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 202.960626] [drm:intel_dump_pipe_config] port clock: 0 [ 202.960626] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 202.960627] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 202.960628] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 202.960629] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 202.960629] [drm:intel_dump_pipe_config] ips: 0 [ 202.960630] [drm:intel_dump_pipe_config] double wide: 0 [ 202.960631] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 202.960631] [drm:intel_dump_pipe_config] planes on this crtc [ 202.960634] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 202.960636] [drm:intel_dump_pipe_config] FB:52, fb = 1366x768 format = 0x34325258 [ 202.960636] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 202.960637] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 202.960639] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 202.960640] [drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config ffff880087369000 for pipe B [ 202.960641] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 202.960642] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 202.960643] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 202.960644] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 202.960645] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 202.960646] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 202.960646] [drm:intel_dump_pipe_config] requested mode: [ 202.960648] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 202.960648] [drm:intel_dump_pipe_config] adjusted mode: [ 202.960650] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 202.960651] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 202.960652] [drm:intel_dump_pipe_config] port clock: 0 [ 202.960652] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 202.960653] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 202.960654] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 202.960655] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 202.960655] [drm:intel_dump_pipe_config] ips: 0 [ 202.960656] [drm:intel_dump_pipe_config] double wide: 0 [ 202.960657] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 202.960657] [drm:intel_dump_pipe_config] planes on this crtc [ 202.960658] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = 0 [ 202.960659] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = 0 [ 202.960660] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = 0 [ 202.960665] [drm:intel_power_well_disable] disabling always-on [ 202.960666] [drm:intel_power_well_enable] enabling always-on [ 202.960667] [drm:intel_power_well_disable] disabling always-on [ 202.960676] [drm:connected_sink_compute_bpp] [CONNECTOR:32:LVDS-1] checking for sink bpp constrains [ 202.960677] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 [ 202.960679] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) [ 202.960682] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 202.960683] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 202.960684] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8800ac020800 for pipe A [ 202.960685] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 202.960685] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 202.960687] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2664082, gmch_n: 4194304, link_m: 148004, link_n: 524288, tu: 64 [ 202.960688] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 202.960689] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 202.960689] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 202.960690] [drm:intel_dump_pipe_config] requested mode: [ 202.960692] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76220 1366 1400 1512 1624 768 769 771 780 0x0 0xa [ 202.960692] [drm:intel_dump_pipe_config] adjusted mode: [ 202.960694] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76220 1366 1400 1512 1624 768 769 771 780 0x8 0xa [ 202.960695] [drm:intel_dump_crtc_timings] crtc timings: 76220 1366 1400 1512 1624 768 769 771 780, type: 0x8 flags: 0xa [ 202.960696] [drm:intel_dump_pipe_config] port clock: 76220 [ 202.960696] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 202.960697] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 202.960698] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 202.960699] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 202.960699] [drm:intel_dump_pipe_config] ips: 0 [ 202.960700] [drm:intel_dump_pipe_config] double wide: 0 [ 202.960701] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x10c08, fp1: 0x10c08 [ 202.960701] [drm:intel_dump_pipe_config] planes on this crtc [ 202.960703] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 202.960705] [drm:intel_dump_pipe_config] FB:52, fb = 1366x768 format = 0x34325258 [ 202.960705] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 [ 202.960706] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 202.960707] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 202.960713] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz [ 202.960724] [drm:ibx_get_dpll] CRTC:26 using pre-allocated PCH DPLL A [ 202.960725] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A [ 202.960738] [drm:intel_power_well_enable] enabling always-on [ 202.960743] [drm:verify_encoder_state] [ENCODER:33:LVDS-33] [ 202.960743] [drm:verify_encoder_state] [ENCODER:37:DAC-37] [ 202.960746] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 202.960748] [drm:verify_encoder_state] [ENCODER:43:TMDS-43] [ 202.960750] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 202.960753] [drm:verify_encoder_state] [ENCODER:47:TMDS-47] [ 202.960755] [drm:intel_connector_verify_state] [CONNECTOR:36:VGA-1] [ 202.960757] [drm:intel_connector_verify_state] [CONNECTOR:39:HDMI-A-1] [ 202.960760] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-1] [ 202.960762] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2] [ 202.960764] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-2] [ 202.960767] [drm:verify_single_dpll_state] PCH DPLL A [ 202.960772] [drm:verify_single_dpll_state] PCH DPLL B [ 202.960782] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 202.961324] [drm:intel_enable_pipe] enabling pipe A [ 202.961934] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x100 [ 202.961935] [drm:ironlake_fdi_link_train] FDI train 1 done. [ 202.962092] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x600 [ 202.962092] [drm:ironlake_fdi_link_train] FDI train 2 done. [ 202.962093] [drm:ironlake_fdi_link_train] FDI train done [ 202.962094] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 1, on? 0) for crtc 26 [ 202.962095] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 203.009927] toshiba_haps: HDD protection level set to: 2 [ 203.119596] tpm_tis 00:01: TPM is disabled/deactivated (0x7) [ 203.119610] rtc_cmos 00:05: System wakeup disabled by ACPI [ 203.210562] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 203.212950] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 203.213872] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 203.213876] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._SDD] (Node ffff8801334b5230), AE_NOT_FOUND (20160108/psparse-542) [ 203.213889] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 203.213892] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._GTF] (Node ffff8801334b5258), AE_NOT_FOUND (20160108/psparse-542) [ 203.214193] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 203.215504] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 203.215508] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._SDD] (Node ffff8801334b5230), AE_NOT_FOUND (20160108/psparse-542) [ 203.215520] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 203.215522] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT0._GTF] (Node ffff8801334b5258), AE_NOT_FOUND (20160108/psparse-542) [ 203.216013] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 203.216017] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._SDD] (Node ffff8801334b5348), AE_NOT_FOUND (20160108/psparse-542) [ 203.216032] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 203.216035] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._GTF] (Node ffff8801334b5370), AE_NOT_FOUND (20160108/psparse-542) [ 203.216048] ata1.00: configured for UDMA/133 [ 203.218613] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 203.218616] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._SDD] (Node ffff8801334b5348), AE_NOT_FOUND (20160108/psparse-542) [ 203.218628] ACPI Error: [GTF1] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359) [ 203.218631] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT1._GTF] (Node ffff8801334b5370), AE_NOT_FOUND (20160108/psparse-542) [ 203.218636] ata2.00: configured for UDMA/100 [ 203.221550] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 203.285738] [drm:intel_panel_enable_backlight] pipe A [ 203.285744] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4539 [ 203.313458] [drm:intel_connector_verify_state] [CONNECTOR:32:LVDS-1] [ 203.313469] [drm:verify_crtc_state] [CRTC:26] [ 203.313489] [drm:verify_single_dpll_state] PCH DPLL A [ 203.313494] [drm:verify_crtc_state] [CRTC:30] [ 203.313508] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=0 [ 203.313511] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 203.323946] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 203.323947] [drm:intel_crt_detect] CRT not detected via hotplug [ 203.324162] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 203.324164] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 203.324367] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 203.324370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 203.324372] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 203.324374] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 203.325198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 203.325200] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 203.325200] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 203.325202] [drm:drm_helper_hpd_irq_event] [CONNECTOR:36:VGA-1] status updated from disconnected to disconnected [ 203.325203] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1] [ 203.412476] [drm:intel_hdmi_detect] HDMI live status down [ 203.412642] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 203.412644] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 203.412803] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 203.412806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 203.412966] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 203.412968] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 203.413127] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 203.413131] [drm:drm_helper_hpd_irq_event] [CONNECTOR:39:HDMI-A-1] status updated from disconnected to disconnected [ 203.413133] [drm:intel_dp_detect] [CONNECTOR:44:DP-1] [ 203.413139] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:DP-1] status updated from disconnected to disconnected [ 203.413141] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 203.500472] [drm:intel_hdmi_detect] HDMI live status down [ 203.500704] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 203.500706] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 203.500940] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 203.500942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 203.501170] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 203.501171] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 203.501402] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 203.501406] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:HDMI-A-2] status updated from disconnected to disconnected [ 203.501408] [drm:intel_dp_detect] [CONNECTOR:48:DP-2] [ 203.501413] [drm:drm_helper_hpd_irq_event] [CONNECTOR:48:DP-2] status updated from disconnected to disconnected [ 203.501444] [drm:intel_didl_outputs] 4 outputs detected [ 203.612570] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci [ 203.770481] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci [ 203.928515] usb 1-1.6: reset full-speed USB device number 5 using ehci-pci [ 204.016619] PM: restore of devices complete after 1117.651 msecs [ 204.016811] usb 1-1.6:1.0: rebind failed: -517 [ 204.016813] usb 1-1.6:1.1: rebind failed: -517 [ 204.016948] PM: Image restored successfully. [ 204.016965] PM: Basic memory bitmaps freed [ 204.016969] Restarting tasks ... done. [ 204.024575] video LNXVIDEO:00: Restoring backlight state [ 204.028459] [drm:asle_set_backlight] bclp = 0x800000ff [ 204.028465] [drm:asle_set_backlight] updating opregion backlight 255/255 [ 204.028468] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4539 [ 204.040108] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 204.043794] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 204.051017] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 204.051771] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1 [ 204.097070] psmouse serio1: synaptics: queried max coordinates: x [..5646], y [..4606] [ 204.260322] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 204.266811] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 204.266908] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1 [ 204.343215] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 204.382112] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 206.127403] wlp2s0: authenticate with 58:2a:f7:9c:6f:30 [ 206.129473] wlp2s0: send auth to 58:2a:f7:9c:6f:30 (try 1/3) [ 206.131922] wlp2s0: authenticated [ 206.132351] wlp2s0: associate with 58:2a:f7:9c:6f:30 (try 1/3) [ 206.136414] wlp2s0: RX AssocResp from 58:2a:f7:9c:6f:30 (capab=0x431 status=0 aid=2) [ 206.139720] wlp2s0: associated [ 206.139783] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready